Literatura científica selecionada sobre o tema "Optically Accessible Burners"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Optically Accessible Burners".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Optically Accessible Burners"
Martinez, Santiago, Simona Merola e Adrian Irimescu. "Flame Front and Burned Gas Characteristics for Different Split Injection Ratios and Phasing in an Optical GDI Engine". Applied Sciences 9, n.º 3 (28 de janeiro de 2019): 449. http://dx.doi.org/10.3390/app9030449.
Texto completo da fonteAx, Holger, Oliver Lammel, Rainer Lückerath e Michael Severin. "High-Momentum Jet Flames at Elevated Pressure, C: Statistical Distribution of Thermochemical States Obtained From Laser-Raman Measurements". Journal of Engineering for Gas Turbines and Power 142, n.º 7 (1 de julho de 2020). http://dx.doi.org/10.1115/1.4045483.
Texto completo da fonteWelch, Cooper, Lars Illmann, Marius Schmidt, Andreas Dreizler e Benjamin Böhm. "Experimental evaluation of spark behavior under diluted conditions in an optically accessible engine". International Journal of Engine Research, 18 de outubro de 2023. http://dx.doi.org/10.1177/14680874231197492.
Texto completo da fonteLeschowski, Martin, Thomas Dreier e Christof Schulz. "A Standard Burner for High Pressure Laminar Premixed Flames: Detailed Soot Diagnostics". Zeitschrift für Physikalische Chemie 229, n.º 5 (28 de janeiro de 2015). http://dx.doi.org/10.1515/zpch-2014-0631.
Texto completo da fonteSeverin, Michael, Oliver Lammel, Holger Ax, Rainer Lückerath, Wolfgang Meier, Manfred Aigner e Johannes Heinze. "High Momentum Jet Flames at Elevated Pressure: Detailed Investigation of Flame Stabilization With Simultaneous Particle Image Velocimetry and OH-LIF". Journal of Engineering for Gas Turbines and Power 140, n.º 4 (7 de novembro de 2017). http://dx.doi.org/10.1115/1.4038126.
Texto completo da fonteWahls, Benjamin Harvey, e Srinath Ekkad. "Temperature reconstruction of an axisymmetric enclosed reactive flow using simultaneous background oriented schlieren and infrared thermography". Measurement Science and Technology, 25 de julho de 2022. http://dx.doi.org/10.1088/1361-6501/ac83e2.
Texto completo da fonteGobin, Bradley, Paul Reiter, Sean Whalen e Gregory Young. "Extinguishing and Combustion Characteristics of Electrically Controllable Solid Propellants Under Elevated Pressures". Journal of Propulsion and Power, 24 de outubro de 2023, 1–12. http://dx.doi.org/10.2514/1.b39189.
Texto completo da fonteMeier, Ulrich, Johannes Heinze, Stefan Freitag e Christoph Hassa. "Spray and Flame Structure of a Generic Injector at Aeroengine Conditions". Journal of Engineering for Gas Turbines and Power 134, n.º 3 (30 de dezembro de 2011). http://dx.doi.org/10.1115/1.4004262.
Texto completo da fonteTartsch, Simon, Saskia Flebbe, Joao Germano Marques de Sousa Ponte e Thomas Sattelmayer. "Effect of Fuel Reactivity and Operating Conditions On Flame Anchoring in the Premixing Zone of a Swirl Stabilized Gas Turbine Combustor". Journal of Engineering for Gas Turbines and Power, 7 de outubro de 2023, 1–24. http://dx.doi.org/10.1115/1.4063688.
Texto completo da fonteGenova, Tommy, Michelle Otero, Jonathan Reyes, Scott Martin e Kareem Ahmed. "Partial Premixing Effects on the Reacting Jet of a High-Pressure Axially Staged Combustor". Journal of Engineering for Gas Turbines and Power 143, n.º 3 (8 de fevereiro de 2021). http://dx.doi.org/10.1115/1.4049700.
Texto completo da fonteTeses / dissertações sobre o assunto "Optically Accessible Burners"
Flores-Montoya, Enrique. "Etude expérimentale de la stabilisation des flammes dans des brûleurs poreux : application des diagnostics optiques dans des géométries imprimées en 3D". Electronic Thesis or Diss., Université de Toulouse (2023-....), 2024. http://www.theses.fr/2024TLSEP087.
Texto completo da fontePorous Media Burners (PMBs) are a combustion technology based on heat recirculation where a flame is stabilized within the cavities of an inert porous matrix. In PMBs, heat is transferred upstream from the burned to the unburned gas through the solid matrix yielding a preheating of the reactants.This increases their burning rate allowing for more compact combustion devices and the operation beyond conventional flammability limits. As a result, the stabilization of flames at ultra-lean equivalence ratios is possible, with the subsequent reduction of the flame temperature and NOx emissions. In these burners, a substantial fraction of the power is radiated by the hot solid phase, with radiated power fractions ranging between 20-30 %. This, together with their elevated efficiency and low pollutant emissions, has motivated their commercial use in various infrared heating applications.In the past years, PMBs have received renewed interest owing to their potential as fuel flexible burners. Their ability to stabilize flames over a wide range of burning rates makes them promising candidates to handle the uneven flame properties of hydrogen and hydrocarbon fuels.The mechanism of heat recirculation in PMBs is well understood. However, there is still limited knowledge about many pore-scale phenomena that have a critical impact on the macroscopic behavior of the system and its performance.Advanced nonintrusive diagnostics could be used to study local flame stabilization mechanisms and improve current models. However, experimental measurements in PMBs are hindered by the lack of optical access to the interior of the porous matrix.This dissertation presents an experimental study on porous media combustion and is devoted to the application of optical diagnostics. Optically accessible PMBs are produced by combining computer-defined topologies with additive manufacturing techniques. This methodology provides an extensive optical access in a 3D burner configuration without altering the matrix structure. Optical access is leveraged to apply CH* chemiluminescence, Mie-scattering imaging and micro PIV. Topology tailoring is exploited to analyze the influence of the geometrical parameters of the porous matrix. Direct flame visualization enables the tracking of the reaction region as a function of the operating conditions, which can be used for model validation. The present results bring to light several limitations of current low order models and highlight the influence of the pore size on flame stabilization. Flame-front tracking is also used to investigate the effect of H2-enrichment on the behavior of the flame. This technique reveals different stabilization trends in H2-enriched flames that are not well retrieved by current models. Mie-scattering permits the quantification of the re-equilibration distance and the analysis of the flame shape. Micro PIV measurements show the influence of the topology on the interstitial flow and on the contribution of hydrodynamic effects to flame stabilization.This PhD seeks to open new paths for the application of non-intrusive diagnostics in PMBs and to improve the current understanding of flame stabilization mechanisms
Trabalhos de conferências sobre o assunto "Optically Accessible Burners"
Ax, Holger, Oliver Lammel, Rainer Lückerath e Michael Severin. "High Momentum Jet Flames at Elevated Pressure: Part C — Statistical Distribution of Thermochemical States Obtained From Laser-Raman-Measurements". In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/gt2019-91377.
Texto completo da fontePeterleithner, Johannes, Andreas Marn e Jakob Woisetschläger. "Interferometric Investigation of the Thermoacoustics in a Swirl Stabilized Methane Flame". In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-42743.
Texto completo da fonteMeier, U., J. Heinze, E. Magens, M. Schroll, C. Hassa, S. Bake e Th Doerr. "Optically Accessible Multisector Combustor: Application and Challenges of Laser Techniques at Realistic Operating Conditions". In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-43391.
Texto completo da fonteLammel, Oliver, Michael Severin, Holger Ax, Rainer Lückerath, Andrea Tomasello, Yeshawini Emmi, Berthold Noll, Manfred Aigner e Lukasz Panek. "High Momentum Jet Flames at Elevated Pressure: A — Experimental and Numerical Investigation for Different Fuels". In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-64615.
Texto completo da fonteDi Domenico, Massimiliano, Peter Kutne, Clemens Naumann, Juergen Herzler, Rajesh Sadanandan, Michael Stoehr, Berthold Noll e Manfred Aigner. "Numerical and Experimental Investigation of a Semi-Technical Scale Burner Employing Model Synthetic Fuels". In ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59308.
Texto completo da fonteKundu, Atanu, Jens Klingmann, Arman Ahamed Subash e Robert Collin. "Pilot-Pilot Interaction Effects on a Prototype DLE Gas Turbine Burner Combustion". In ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-57338.
Texto completo da fonteIrimescu, Adrian, Silvana Di Iorio, Simona Silvia Merola, Paolo Sementa e Bianca Maria Vaglieco. "Correlation between Simulated Volume Fraction Burned Using a Quasi-Dimensional Model and Flame Area Measured in an Optically Accessible SI Engine". In WCX™ 17: SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2017. http://dx.doi.org/10.4271/2017-01-0545.
Texto completo da fonteSeverin, Michael, Oliver Lammel, Holger Ax, Rainer Lückerath, Wolfgang Meier, Manfred Aigner e Johannes Heinze. "High Momentum Jet Flames at Elevated Pressure: B — Detailed Investigation of Flame Stabilization With Simultaneous PIV and OH-LIF". In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-64556.
Texto completo da fonteJella, Sandeep, Gilles Bourque, Jeffrey Bergthorson, Wing Yin Kwong e Adam Steinberg. "RANS and LES Modeling of a Linear-Array Swirl Burner Using a Flamelet-Progress Variable Approach". In ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-75896.
Texto completo da fonteMeier, Ulrich, Johannes Heinze, Stefan Freitag e Christoph Hassa. "Spray and Flame Structure of a Generic Injector at Aeroengine Conditions". In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45282.
Texto completo da fonte