Bibliografias temáticas / Oil well drilling

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Oil well drilling"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 29 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Oil well drilling".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Oil well drilling"

1

Della Nave, Esteban, e Eduardo Natalio Dvorkin. "On the modeling of oil well drilling processes". Engineering Computations 32, n.º 2 (20 de abril de 2015): 387–405. http://dx.doi.org/10.1108/ec-03-2013-0093.

Texto completo da fonte
Resumo:
Purpose – The purpose of this paper is to present the development of a simulator of oil well drilling processes. Design/methodology/approach – The simulator incorporates the main variables that are used by drilling engineers in the definition of the drilling processes. The code is useful a priori, in the design of a drilling process, as a tool for comparing different design options and predicting their results and a posteriori of a failure to understand its genesis and therefore provide know-why to improve the drilling techniques. Findings – The developed finite element simulator uses a co-rotational Bernoulli beam element, an explicit time integration scheme and an explicit contact algorithm. The numerical results show that the simulator is stable and provides consistent solutions. Practical implications – During the drilling of oil wells, the fatigue damage and wear of the drilling column is of utmost concern. To determine the mechanical behavior of the drilling column standard simplified analyses are usually performed using commercially available codes; however, those standard analyses do not include a transient dynamic simulation of the process; hence, it is necessary to develop a specific tool for the detailed dynamic simulation of drilling processes. Originality/value – A simulator able to perform a description of the drilling process in the time range will be an important contribution to the tools used by drilling engineers.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Ovchinnikov, P. V., e A. S. Syrchina. "Optimization methods for well designs, drilling and well completion technologies". Proceedings of higher educational establishments. Geology and Exploration, n.º 5 (13 de dezembro de 2023): 22–32. http://dx.doi.org/10.32454/0016-7762-2023-65-5-22-32.

Texto completo da fonte
Resumo:
Background. The task of increasing the efficiency of well construction, reducing the labor- and financial costs involved, and achieving the maximum operational characteristics of oil and gas wells requires the application of the most recent technologies and technological solutions for well drilling and well completion.Aim. Review and analysis of the implementation and development of promising technologies for well drilling and well completion in the Russian Federation to identify those capable of optimizing well designs, improving the efficiency of technological processes for drilling and completion of exploration and production wells.Materials and methods. An analysis of accumulated experience, generalization of the results of implementation of modern solutions and technologies for drilling and completion of wells by oil- and gas-producing enterprises of the Russian Federation.Results. The relevant tasks and directions for improving drilling and well completion technologies and using state-of-the-art equipment are outlined. These solutions can contribute to increasing the efficiency of well construction, reducing the drilling duration of oil and gas wells, and ensuring technological sovereignty.Conclusion. The considered directions and technologies, as well as their composite tasks and methodological, engineering, and software implementation aspects, can become a subject for research, project, and engineering works, as well as for final qualifying works of students and dissertations.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Carpenter, Chris. "Expertise in Complex-Well Construction Leveraged for Geothermal Wells". Journal of Petroleum Technology 75, n.º 05 (1 de maio de 2023): 87–89. http://dx.doi.org/10.2118/0523-0087-jpt.

Texto completo da fonte
Resumo:
_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 204097, “Constructing Deep Closed-Loop Geothermal Wells for Globally Scalable Energy Production by Leveraging Oil and Gas Extended-Reach Drilling and High-Pressure/High-Temperature Well-Construction Expertise,” by Eric van Oort, SPE, Dongmei Chen, SPE, and Pradeepkumar Ashok, SPE, The University of Texas at Austin, et al. The paper has not been peer reviewed. _ In the complete paper, deep closed-loop geothermal systems (DCLGS) are introduced as an alternative to traditional enhanced geothermal systems (EGS) for green energy production that is globally scalable and dispatchable. The authors demonstrate that DCLGS wells can generate power on a scale comparable to that of EGS. They also highlight technology gaps and needs that still exist for economically drilling DCLGS wells, writing that it is possible to extend oil and gas technology, expertise, and experience in extended-reach drilling (ERD) and high-pressure/high-temperature (HP/HT) drilling to construct complex DCLGS wells. Introduction CLGS is considered a subset of EGS, but the authors write that it is a distinct entity. EGS mostly involves well designs that rely on fractures for heat extraction. Such systems are different from CLGS wells in that the latter use closed conduits for thermal fluid circulation and heating. CLGS relies on fluids pumped through a closed loop. The authors treat CLGS systems as being different from EGS systems, with the understanding that drilling technologies discussed in the paper as enablers for CLGS wells apply equally to EGS wells. In the geothermal (GT) domain, the majority of attention and funding currently is assigned to EGS projects. A case is made in the complete paper to continue to develop DCLGS technology because of its favorable risk profile compared with EGS. Part I of the complete paper introduces a hydraulic model coupled with a thermal model suitable for calculating the power generation of DCLGS wells. This synopsis concentrates instead on Part II of the complete paper, in which technology gaps and needs of DCLGS drilling and well construction are highlighted and opportunities identified where oil and gas experience and technology can be directly applied and leveraged. Similarities and Differences of Deep GT and Oil and Gas HP/HT Wells - GT wells generally use larger production hole sizes than typical land wells. - Casing-cement annuli typically are cemented back to surface. - GT wells can be drilled in more-forgiving pore-pressure fracture gradient (PPFG) environments with wider drilling margins than geopressured HP/HT wells in hydrocarbon systems. - Severe lost circulation appears to be a universal problem in deep GT wells. - Drilling costs can account for 50% or more of the total capital costs for a GT energy project. - Data sets on GT wells are much smaller than those for oil and gas wells.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

ON, Shemelina. "Constructing a Heavy Oil Well". Petroleum & Petrochemical Engineering Journal 6, n.º 1 (2022): 1–6. http://dx.doi.org/10.23880/ppej-16000300.

Texto completo da fonte
Resumo:
The article presents a description of the designs of wells intended for the production of high-viscosity oil. The main problems associated with the planning and deployments of architecture, construction of high-viscosity oil wells are described. World experience in well construction is presented. Vertical wells are usually used for primary cold production and cyclic steam or steam flooding processes. On the other hand, increased reservoir contact may require deviated, horizontal, or multilateral wells. In the case of steam-assisted gravity drainage (SAGD) and some solvent injection processes, the recovery process may require a well-placed pair of horizontal wells. Advanced drilling and real-time measurement technologies reviewed. Geo mechanical factors are studied when considering the implementation of any steam or thermal processes in the field. Examples of construction of multilateral wells in various combinations are shown depending on the field development strategy and for maximum reservoir drainage. The main recommendations for the placement of wells are proposed.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Deryaev, A. R. "Well trajectory management and monitoring station position borehole". SOCAR Proceedings, SI2 (31 de dezembro de 2023): 1–6. http://dx.doi.org/10.5510/ogp2023si200870.

Texto completo da fonte
Resumo:
The article analyzes the selection and recommendations, as well as instructions for drilling deep directional and horizontal wells, electric drilling methods in the Western part of the oil and gas fields of Turkmenistan in order to increase oil and gas production from productive layers of the horizons of the red-colored strata. To analyze the choice of drilling deep directional and horizontal wells, materials of previously operated wells, geological and operational characteristics of deposits and the guidance document «Operating Instructions for oil and gas wells», as well as safety rules in the oil and gas industry were used. This paper provides a detailed analysis of the complexity of drilling deep directional and horizontal oil and gas wells and their specific causes, as well as recommendations for the selection of design profiles and operating instructions for different types of deflectors, as well as telemetry systems. Such work will be useful and can be used to fulfill the tasks set when drilling wells, as well as to increase the production of oil and gas wells and to develop fields with complex geological characteristics. Keywords: profile; deflections; borehole curvature; trajectory; rotor; layout; telesystem; conductor; inclinometer; deflector; azimuth.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Fan, Sen, Yue Xiang Li, Jin Qiang Cao e Jian Bo Xie. "Optimization Technique in Double Stepped Thin Horizontal Well". Advanced Materials Research 734-737 (agosto de 2013): 1226–29. http://dx.doi.org/10.4028/www.scientific.net/amr.734-737.1226.

Texto completo da fonte
Resumo:
Oil industry at home and abroad has paid attention to the usage of horizontal well with the development of horizontal drilling technology, the number of horizontal well is increasing year by year inland, but some horizontal well constructions in thin oil pay is not ideal. Nanzhong 1H well has used double stepped horizontal well technology to develop thin oil pay, it has optimized the constructions in different stages and combined the steering technique in the drilling practice of thin oil pay, it has accelerated the drilling speed and reached the target fast and safely. It provides the reference for the further development of deep thin oil pay of horizontal well technology.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Deryaev, Annaguly. "Engineering aspects and improvement of well drilling technologies at the Altyguyi field". Naukovij žurnal «Tehnìka ta energetika» 15, n.º 2 (30 de abril de 2024): 9–20. http://dx.doi.org/10.31548/machinery/2.2024.09.

Texto completo da fonte
Resumo:
The relevance of the research is justified by the rapid development of the oil industry, which requires constant improvement of methods and equipment to increase extraction efficiency and reduce environmental impact. The aim of this study is to enhance the current engineering aspects of drilling in the Altyguyi field while considering increased productivity and reduced environmental impact. Among the methods used, it is necessary to mention the synthesis method, abstraction method, generalization method, induction method, deduction method, classification method, and others. This study examines the technological aspects of operating wells in the Altyguyi gas-condensate field. Extensive laboratory and industrial research on the properties and composition of oil, gas, and condensate was conducted to properly implement the dual completion technology for gas extraction from one formation and oil extraction from another formation in a single well. By implementing advanced drilling methods, including horizontal and multi-hole drilling, as well as using modern drilling fluids, it was possible to improve well productivity and reduce drilling time. As a result of technology optimization, the overall efficiency of the oil and gas extraction process in the field has been increased, confirming the significance of innovation implementation for improving results in the oil industry. These enhancements not only increased drilling safety and efficiency, but also reduced the negative impact on the environment, emphasizing the importance of integrating modern technologies with environmental considerations in the oil extraction process. This research makes a significant contribution to the development of more efficient and environmentally sustainable drilling methods in oil fields, contributing to increased oil extraction productivity and reduced environmental impact
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Dotsenko, V. A. "Assembly of PND oil-well drilling equipment". Chemical and Petroleum Engineering 32, n.º 6 (novembro de 1996): 559–62. http://dx.doi.org/10.1007/bf02416677.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Gaurina-Međimurec, Nediljka, Borivoje Pašić e Petar Mijić. "Risk Planning and Mitigation in Oil Well Fields". International Journal of Risk and Contingency Management 4, n.º 4 (outubro de 2015): 27–48. http://dx.doi.org/10.4018/ijrcm.2015100103.

Texto completo da fonte
Resumo:
Lost circulation presents one of the major risks associated with drilling. The complete prevention of lost circulation is impossible but limiting circulation loss is possible if certain precautions are taken. Industry experience has proved that is often easier and more effective to prevent the occurrence of loss than to attempt to stop or reduce them once they have started. The problem of lost circulation was magnified considerably when operators began drilling deeper and/or depleted formations. A strategy for successful management of lost circulation should include preventative (best drilling practices, drilling fluid selection, and wellbore strengthening materials) and remedial measures when lost circulation occurs through the use of lost circulation materials. In this paper the authors present lost circulation zones and causes, potential zones of lost circulation, excessive downhole pressures causes, preventive measures, tools and methods for locating loss zones and determining the severity of loss, lost circulation materials, and recommended treatments.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Abd Alhaleem, Ayad, Safaa Husain Sahi e Amel Habeeb Assi. "Bit Performance in Directional Oil Wells". Journal of Engineering 21, n.º 11 (1 de novembro de 2015): 80–93. http://dx.doi.org/10.31026/j.eng.2015.11.05.

Texto completo da fonte
Resumo:
This work aims to analyze and study the bit performance in directional oil wells which leads to get experience about the drilled area by monitoring bit performance and analyzing its work. This study is concerned with Rumaila Oil Field by studying directional hole of one oil well with different angles of inclination. Drilling program was used in order to compare with used parameters (WOB, RPM and FR).in those holes. The effect of the drilling hydraulic system on the bit performance was studied as well as the hydraulic calculation can be done by using Excel program. This study suggests method which is used to predict the value of penetration rate by studying different formation type to choose the best drilling parameters to drill each formation. Finally, the main aim of this research is to have the benefit from the past well drilling data to drill new wells without needing new drilling program for each well, also knowing the problems of each formation to avoid them as soon as possible through drilling the new wells, which will improve the bit performance.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Oil well drilling"

1

Wang, Hong. "Near wellbore stress analysis for wellbore strengthening". Laramie, Wyo. : University of Wyoming, 2007. http://proquest.umi.com/pqdweb?did=1338926861&sid=1&Fmt=2&clientId=18949&RQT=309&VName=PQD.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Ozkan, Erdal. "Performance of horizontal wells /". Access abstract and link to full text, 1988. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8825498.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

CHIEZA, CAROLINA PONTES. "DIAGNOSTICS OF OPERATIONAL PROBLEMS DURING OIL WELL DRILLING". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2011. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=19161@1.

Texto completo da fonte
Resumo:
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
A perfuração de poços de petróleo é uma operação complexa e de elevado risco e custo financeiro. Com o passar dos anos o número de poços horizontais e de longo alcance perfurados aumentou consideravelmente devido à existência de reservatórios mais profundos e de difícil acesso, além da necessidade de se obter uma melhor eficiência na extração do petróleo. Juntamente com este aumento na complexidade da perfuração surgiram problemas operacionais que, por muitas vezes, não são identificados e acabam sendo responsáveis pela maior parte do tempo não produtivo da operação elevando, assim, seus custos diários. Logo, o estudo destes problemas é de extrema importância para se garantir condições seguras de operação, além de contribuir para a otimização da mesma, mitigação dos efeitos causados e uma maior rapidez e eficácia nas tomadas de decisões. O presente trabalho apresenta uma metodologia de identificação de problemas operacionais a fim de otimizar a perfuração de poços, através da utilização de recursos computacionais, para gerar análises de previsão de torque, arraste e hidráulica e, posterior, comparação com os dados de perfuração obtidos, em tempo real, dos sensores de mudlogging e da ferramenta de PWD. A caracterização dos problemas foi realizada com base nos dados reais de poços horizontais, perfurados na Bacia de Campos, mediante a identificação de possíveis desvios importantes, que não estavam previstos, nos parâmetros de perfuração. Através da retro-análise dos dados de perfuração dos poços foi possível diagnosticar alguns problemas operacionais ocorridos durante esta operação, tais como: perda de circulação, prisão da coluna de perfuração, washout no tubo de perfuração e dificuldade de avanço causada por uma limpeza deficiente, pelo enceramento da broca e pela vibração na coluna de perfuração. Além disso, foram destacados também alguns exemplos que mostraram variações na tendência do torque em função de mudança na litologia do poço.
Drilling is a complex and a high risk process which involves high financial cost. Over the years the number of horizontal wells and extended reach wells increased, due to the existence of deeper reservoirs, which are more difficult to access, in addition to the need of having an improvement in the oil production efficiency. Along with this increased complexity of drilling, unidentified operational problems end up being responsible for most of the non-productive time and daily cost increase. Thus, analyzing such problems it is very important to ensure safe operating conditions, optimize drilling operation, control causes/effects and have a faster and efficient decision-making capability. This paper presents a methodology to identify operational problems in order to optimize drilling operation using computer resources to predict torque, drag and hydraulic effects and later on to compare with the drilling data obtained in real time from mudlogging sensors and PWD (Pressure While Drilling). Cases were based on real time data from horizontal wells drilled in Campos Basis, Rio de Janeiro, and the problems were identified with unforeseen changes in drilling parameters trend. After studying the available well data, it was possible to diagnose several operational problems occurred during drilling, such as: lost circulation, stuck pipe, drill pipe washout and difficulty in drilling due to a poor hole cleaning, bit balling and drill string stick-slip vibration. In addition, it was also highlighted some examples that showed variations in the torque trend due to lithology changes.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

PICARD, NICOLAS. "DEVELOPMENT OF NOVEL HYDRAULICS FOR OIL WELL DRILLING". University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1025637714.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Becker, Thomas Edward. "Correlations for drill-cuttings transport in directional-well drilling /". Access abstract and link to full text, 1987. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8712608.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Mishra, Nekkhil. "Investigation of hole cleaning parameters using computational fluid dynamics in horizontal and deviated wells". Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5111.

Texto completo da fonte
Resumo:
Thesis (M.S.)--West Virginia University, 2007.
Title from document title page. Document formatted into pages; contains x, 65 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 58-60).
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Kartoatmodjo, Rudjuk Sinung Trijana. "A model for finite conductivity horizontal wellbores /". Access abstract and link to full text, 1994. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/9522755.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hernæs, Marthe Pernille Voltersvik. "Human related root causes behind oil well drilling accidents". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-20384.

Texto completo da fonte
Resumo:
Many accident investigation techniques and other methods used by the petroleum industry today list a set of underlying human related causes and subsequent improvement suggestions. Do these techniques address the root cause behind the problem so that the appropriate initiatives can be implemented? The focus of the present thesis was to determine the human related root cause of two major accidents in the North Sea. This in order to give recommendations to improve the safety levels in the organisation. In order to achieve the above-mentioned goals, the IPT Knowledge Model was adapted to the given accidents. The data input into the model was based on interpreted observations from former investigation reports. The analysis of the blowout on Snorre A and the well control incident on Gullfaks C resulted in 49 and 63 observations respectively. For both accidents, the Human Factor that was indicated to have the largest affect on the accidents was Training and Competency (29% for Snorre A and 19% for Gullfaks C). Lack of competence was indicated as the majority subclass. Collectively, management and supervision, or lack thereof, was also indicated as being a contributing factor to the accidents. These final results coincide with the findings in other investigation reports. However, these are more acute, indicating a specific area of improvement within the company. By increasing the competency levels within the company and ensuring that the leaders and management have the proper tools to follow-up their employees and their operations, the safety levels and culture will improve.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Campos, Wellington. "Mechanistic modeling of cuttings transport in directional wells /". Access abstract and link to full text, 1995. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/9527819.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Huang, Xiaoguang. "Limit state design of oil and gas well casings". Thesis, University of Wolverhampton, 2002. http://hdl.handle.net/2436/99757.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Oil well drilling"

1

Mills, Peter G. Deviated drilling. Boston: International Human Resources Development Corporation, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

T, Bourgoyne Adam, ed. Applied drilling engineering. Richardson, TX: Society of Petroleum Engineers, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

(Louisiana), Well Control School, ed. Basic drilling technology. Harvey, La: The School, 1998.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

University of Texas at Austin. Petroleum Extension Service. Routine drilling operations. Austin, Texas: Petroleum Extension Service, Division of Continuing and Innovative Education, The University of Texas at Austin, 2015.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Fraser, Ken. Managing drilling operations. London: Elsevier Applied Science, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Woods, Joe D. World Oil casing while drilling handbook. Houston: Gulf Pub. Co., 2003.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Aadnøy, Bernt Sigve. Advanced drilling and well technology. Editado por Society of Petroleum Engineers (U.S.). Richardson, TX: Society of Petroleum Engineers, 2009.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Randall, Ben. Drilling a straight hole. Austin, Texas: Petroleum Extension Service, Division of Continuing and Innovative Education, 2015.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Rogachev, M. K. Borʹba s oslozhnenii︠a︡mi pri dobyche nefti. Moskva: Nedra, 2006.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Dareing, Don W. Mechanics of drillstrings and marine risers. New York, NY: ASME Press, 2012.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Oil well drilling"

1

Sotoodeh, Karan. "Drilling and Well Completion Equipment". In Equipment and Components in the Oil and Gas Industry Volume 1, 29–65. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003467151-2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Skalle, Pål, e Agnar Aamodt. "Knowledge-Based Decision Support in Oil Well Drilling". In Intelligent Information Processing II, 443–55. Boston, MA: Springer US, 2005. http://dx.doi.org/10.1007/0-387-23152-8_56.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Yang, Jin. "Drilling-In Installation of Oil-Gas Well Conductor". In Installation Methods of Offshore Oil-Gas Well Conductor, 29–65. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-5685-0_2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Amadi-Echendu, Joe, e Audu Enoch Yakubu. "Asset Operations: Non-productive Times During Oil Well Drilling". In Lecture Notes in Mechanical Engineering, 43–48. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06966-1_4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Estes, Jack C. "Role of Water-Soluble Polymers in Oil Well Drilling Muds". In Advances in Chemistry, 155–70. Washington, DC: American Chemical Society, 1986. http://dx.doi.org/10.1021/ba-1986-0213.ch009.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Valipour Shokouhi, Samad, Agnar Aamodt e Pål Skalle. "Applications of CBR in Oil Well Drilling: A General Overview". In Intelligent Information Processing V, 102–11. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16327-2_15.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Skalle, Paal, Jostein Sveen e Agnar Aamodt. "Improved Efficiency of Oil Well Drilling through Case Based Reasoning". In PRICAI 2000 Topics in Artificial Intelligence, 712–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-44533-1_71.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Dawar, Kshitij, Sanjay Srinivasan e Mort D. Webster. "Application of Reinforcement Learning for Well Location Optimization". In Springer Proceedings in Earth and Environmental Sciences, 81–110. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-19845-8_7.

Texto completo da fonte
Resumo:
AbstractThe extensive deployment of sensors in oilfield operation and management has led to the collection of vast amounts of data, which in turn has enabled the use of machine learning models to improve decision-making. One of the prime applications of data-based decision-making is the identification of optimum well locations for hydrocarbon recovery. This task is made difficult by the relative lack of high-fidelity data regarding the subsurface to develop precise models in support of decision-making. Each well placement decision not only affects eventual recovery but also the decisions affecting future wells. Hence, there exists a tradeoff between recovery maximization and information gain. Existing methodologies for placement of wells during the early phases of reservoir development fail to take an abiding view of maximizing reservoir profitability, instead focusing on short-term gains. While improvements in drilling technologies have dramatically lowered the costs of producing hydrocarbon from prospects and resulted in very efficient drilling operations, these advancements have led to sub-optimal and haphazard placement of wells. This can lead to considerable number of unprofitable wells being drilled which, during periods of low oil and gas prices, can be detrimental for a company’s solvency. The goal of the research is to present a methodology that builds machine learning models, integrating geostatistics and reservoir flow dynamics, to determine optimum future well locations for maximizing reservoir recovery. A deep reinforcement learning (DRL) framework has been proposed to address the issue of long-horizon decision-making. The DRL reservoir agent employs intelligent sampling and utilizes a reward framework that is based on geostatistical and flow simulations. The implemented approach provides opportunities to insert expert information while basing well placement decisions on data collected from seismic data and prior well tests. Effects of prior information on the well placement decisions are explored and the developed DRL derived policies are compared to single-stage optimization methods for reservoir development. Under similar reward framework, sequential well placement strategies developed using DRL have been shown to perform better than simultaneous drilling of several wells.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Pereira, Romulo A., Arnaldo V. Moura e Cid C. de Souza. "Comparative Experiments with GRASP and Constraint Programming for the Oil Well Drilling Problem". In Experimental and Efficient Algorithms, 328–40. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/11427186_29.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Wang, Xiu-ying, Rui-bin Zhu, Jian-jun Gong, Ge-wei Han, Jing-jing Zhang, Li-hui Zhao, Bin Zhang, Hong-rui Huo e Hui-yu Li. "Well Structure Optimization and Drilling Matching Technology for Shale Oil in Shulu Sag". In Proceedings of the International Field Exploration and Development Conference 2021, 1468–78. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-2149-0_137.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Oil well drilling"

1

Norton, S. J., J. Snaas e E. Leith. "Well Cost Reduction Initiatives in Deep Well Drilling". In Middle East Oil Show and Conference. Society of Petroleum Engineers, 1997. http://dx.doi.org/10.2118/37824-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Akgun, F. "Drilling Stable Horizontal Wells-A Key Problem in Modern Oil Well Drilling". In Canadian International Petroleum Conference. Petroleum Society of Canada, 2002. http://dx.doi.org/10.2118/2002-052.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Mellak, Abderrahmane, Khaled Benyounes e Adel Djeridi. "Drop pressure optimization in oil well drilling". In INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING 2014 (ICCMSE 2014). AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4897869.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Al Rubaii, Mohammed Murif, Abdullah Al Yami e Eno Omini. "A Robust Correlation Improves Well Drilling Performance". In SPE Middle East Oil and Gas Show and Conference. Society of Petroleum Engineers, 2019. http://dx.doi.org/10.2118/195062-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Khreibeh, Hanaa Abou, Saoud Al Shamsi, Edilberto Vasallo, Fadi Farag, Ged Lunt e Jiten Bhardwaj. "Optimizing Well Integrity in Intelligent Oil Fields". In SPE/IADC Middle East Drilling Technology Conference and Exhibition. Society of Petroleum Engineers, 2018. http://dx.doi.org/10.2118/189389-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Hendrazid, Hendrazid, Irwan Yulianto, Syaiful Kurniawan e Sukardono Utomo. "Lesson Learned and Drilling Improvements Experienced From Matindok Gas Well Drilling Campaign". In SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/176161-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Xu, Zhiyue, Claude B. Reed, Richard Parker e Ramona Graves. "Laser spallation of rocks for oil well drilling". In ICALEO® 2004: 23rd International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2004. http://dx.doi.org/10.2351/1.5060237.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Zhang, Xiaocheng, Tao Xie, Hongbo Huo, Ruibing He, Hai Lin, Xinxin Hou e Dongsheng Xu. "Maximizing Recovery and Reducing Well Cost Using Herringbone Multilateral Horizontal Well Drilling and Completion Technology". In Gas & Oil Technology Showcase and Conference. SPE, 2023. http://dx.doi.org/10.2118/214019-ms.

Texto completo da fonte
Resumo:
Abstract With the in-depth development of Bohai Oilfield, China National Offshore Oil Corporation (CNOOC), the water cut of some old wells become too high to produce while nearby remaining recoverable reserves are still considerable. In order to maximize recovery and reduce well construction cost, herringbone multilateral horizontal well drilling and completion technology is employed to increase drainage area of single well and make full use of well slot and old wellbore. Considering the current development of oilfield and the geological characteristics of reservoir, the technical difficulties of herringbone multilateral horizontal well drilling and completion technology including high build-up rate, easy blockage of drilling tools in the sidetracking in open hole, easy collapse and instability of sandwich wall and high requirements for drilling fluid performance are analyzed and solved. This technology has been successfully applied in three wells with total 6 branches and the production of three wells is twice higher than that of conventional horizontal wells with no water cut, which fully verified the reliability of the branch well tools and the feasibility of the technology. Herringbone multilateral horizontal well drilling and completion technology provides a new idea for the treatment of low production and low efficiency wells in a sustainable way and will be widely promoted and applied in Bohai oilfield, which can also provide reference for other high water cut oilfields.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Mahajan, Mahesh, Nasser Al Araimi, Lance Nigel Portman e Adrian Terry. "Successful Rescue of a Sunken Oil Well With Innovative Coiled-Tubing Solution". In IADC/SPE Drilling Conference. Society of Petroleum Engineers, 2006. http://dx.doi.org/10.2118/98044-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Alusta, Gamal Abdalla, Eric James Mackay, Julian Fennema e Ian Collins. "EOR vs. Infill Well Drilling: How to Make the Choice?" In SPE Enhanced Oil Recovery Conference. Society of Petroleum Engineers, 2011. http://dx.doi.org/10.2118/143300-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Oil well drilling"

1

Skone, Timothy J. Oil well drilling and development. Office of Scientific and Technical Information (OSTI), julho de 2013. http://dx.doi.org/10.2172/1509427.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Rougeot, J. E., e K. A. Lauterbach. The drilling of a horizontal well in a mature oil field. Office of Scientific and Technical Information (OSTI), janeiro de 1991. http://dx.doi.org/10.2172/6220198.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Edward Marks. Use of Biostratigraphy to Increase Production, Reduce Operating Costs and Risks and Reduce Environmental Concerns in Oil Well Drilling. Office of Scientific and Technical Information (OSTI), setembro de 2005. http://dx.doi.org/10.2172/921974.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Bingham-Koslowski, N., T. McCartney, J. Bojesen-Koefoed e C. Jauer. Hydrocarbon resource potential in the Labrador-Baffin Seaway and onshore West Greenland. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/321859.

Texto completo da fonte
Resumo:
Exploration for hydrocarbons began in the Labrador-Baffin Seaway in the 1960s; activity along the Labrador margin is still ongoing. A moratorium on exploration activities in the Canadian Arctic was enacted in 2016, halting drilling and data acquisition in western Davis Strait and along the Baffin Island margin. The exploration for hydrocarbons along the West Greenland margin ceased in 2021. Despite the presence of all hydrocarbon system elements as well as direct indicators of at least one working hydrocarbon system (e.g. slicks and/or seeps, oil and/or gas shows), no commercially viable accumulations of hydrocarbons have been discovered in the region. Potential sea-surface hydrocarbon slicks have been identified throughout the study region using synthetic aperture radar, but only the slick offshore Scott Inlet (Nunavut) has been directly linked to seafloor hydrocarbon seepage.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Oil well drilling":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia