Siga este link para ver outros tipos de publicações sobre o tema: Offshore structures.

Artigos de revistas sobre o tema "Offshore structures"

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Offshore structures".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Clauss, G., E. Lehmann, C. Ostergaard e Carlos Guedes Soares. "Offshore Structures". Journal of Offshore Mechanics and Arctic Engineering 117, n.º 4 (1 de novembro de 1995): 298–99. http://dx.doi.org/10.1115/1.2827238.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Pérez Fernández, Rodrigo, e Miguel Lamas Pardo. "Offshore concrete structures". Ocean Engineering 58 (janeiro de 2013): 304–16. http://dx.doi.org/10.1016/j.oceaneng.2012.11.007.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Lyons, G. J. "Mobile offshore structures". Engineering Structures 11, n.º 3 (julho de 1989): 202. http://dx.doi.org/10.1016/0141-0296(89)90010-2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Kouichirou, Anno, e Takeshi Nishihata. "DEVELOPMENT ON OFFSHORE STRUCTURE". Coastal Engineering Proceedings 1, n.º 32 (31 de janeiro de 2011): 50. http://dx.doi.org/10.9753/icce.v32.structures.50.

Texto completo da fonte
Resumo:
Authors have developed the offshore structure for control of sea environment named S-VHS construction method, which is composed of the sloping top slit-type caisson and steel pipe piles. The sloping top form enables to realize the remarkable reduction of wave force exerted on the dike body compared with the conventional one. In this paper, hydraulic feature with wave dissipation ability and wave force reduction effect are verified through some hydraulic experiments. After the preliminary study for the valid structure form, reflection and transmission ability for the selected structure models were tested with the hydraulic experiment relevant to the ratio of caisson width and wave length. Finally, wave force experiment was executed and it revealed the performance of wave force reduction. Based on the results, we proposed specific design wave force formula for S-VHS construction method.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

MIYAZAKI, Tatsuo. "Ships and Offshore Structures". JOURNAL OF THE JAPAN WELDING SOCIETY 77, n.º 5 (2008): 461–64. http://dx.doi.org/10.2207/jjws.77.461.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

YAMASHITA, Yasuo. "Ships and Offshore Structures". JOURNAL OF THE JAPAN WELDING SOCIETY 79, n.º 5 (2010): 462–65. http://dx.doi.org/10.2207/jjws.79.462.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Tanner, R. G. "Design in offshore structures". Canadian Journal of Civil Engineering 12, n.º 1 (1 de março de 1985): 238. http://dx.doi.org/10.1139/l85-025.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Ghosh, S. K. "Buckling of offshore structures". Journal of Mechanical Working Technology 14, n.º 3 (junho de 1987): 386–87. http://dx.doi.org/10.1016/0378-3804(87)90023-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Rhodes, J. "Buckling of offshore structures". Thin-Walled Structures 3, n.º 1 (janeiro de 1985): 85. http://dx.doi.org/10.1016/0263-8231(85)90021-7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Bulson, P. S. "Buckling of offshore structures". Applied Ocean Research 7, n.º 2 (abril de 1985): 115. http://dx.doi.org/10.1016/0141-1187(85)90044-6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
11

Taylor, R. Eatock. "Dynamics of offshore structures". Engineering Structures 7, n.º 3 (julho de 1985): 214–15. http://dx.doi.org/10.1016/0141-0296(85)90054-9.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
12

Long, A. E. "Construction of offshore structures". Engineering Structures 10, n.º 2 (abril de 1988): 141. http://dx.doi.org/10.1016/0141-0296(88)90041-7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
13

Faulkner, D. "Hydrodynamics of offshore structures". Marine Structures 1, n.º 1 (janeiro de 1988): 81–83. http://dx.doi.org/10.1016/0951-8339(88)90012-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
14

Yang, Ray-Yeng, Hsin-Hung Chen, Hwung-Hweng Hwung, Wen-Pin Jiang e Nian-Tzu Wu. "EXPERIMENTAL STUDY ON THE LOADING AND SCOUR OF THE JACKET TYPE OFFSHORE WIND TURBINE FOUNDATION". Coastal Engineering Proceedings 1, n.º 32 (21 de janeiro de 2011): 25. http://dx.doi.org/10.9753/icce.v32.structures.25.

Texto completo da fonte
Resumo:
A 1:36 scale model tests were carried out in the Medium Wave Flume (MWF) and Near-shore Wave Basin (NSWB) at the Tainan Hydraulics Laboratory (THL) with the jacket type offshore wind turbine foundation located in the test area. The loading of typhoon wave with current on the jacket type offshore wind turbine foundation was investigated in the MWF with fixed bed experiment. Meanwhile, the scour around the jacket type offshore wind turbine foundation exposed to wave and current was conducted in the NSWB with the moveable bed experiment. Two locations (water depth 12m and 16m) of the foundations are separately simulated in this study. Based on the analysis from the former NSWB experimental results, the suitable scour protection of a four-layer work around the foundation is also proposed to the impact of scour. Finally, a four-layer scour protection is tested and found to be effective in preventing scour around jacket type foundation of offshore wind turbines at water depth 12m and 16m.
Estilos ABNT, Harvard, Vancouver, APA, etc.
15

Damilola, Oluwafemi John, Elakpa Ada Augustine e Nwaorgu Obioima Godspower. "Fatigue Evaluation of Offshore Steel Structures Considering Stress Concentration Factor". International Journal of Research and Review 8, n.º 10 (21 de outubro de 2021): 307–13. http://dx.doi.org/10.52403/ijrr.20211041.

Texto completo da fonte
Resumo:
The installation of offshore structures and facilities in the marine environment, usually for the production and transmission of oil, gas exploration, electricity, and other natural resources is referred to as offshore construction. Since offshore structures are subjected to changing threats to the environment year-round. Fatigue behavior prediction noticed on these structures should be considered during the design stage. Fatigue is one of the failure mechanisms of offshore steel structures, and it must be investigated properly during system design. The fatigue analysis of offshore structures under drag wave force, total wave force, total moment about the sea bed, and other variables are reviewed thoroughly. The structure's dynamic response becomes a critical aspect in the whole design process. The fatigue analysis was carried out using MATLAB software, material properties of the offshore structure, and wave spectrum characteristics in this study. This study shows the JONSWAP spectrum and stress concentration analysis prediction. The offshore support structure that is predicted during the design phase will help to keep the stress concentration factor below the fatigue threshold and anticipate safe life design, according to the results of the fatigue study. The fatigue performances of tripod and jacket steel support structures in intermediate waters depth are compared in this project (20-50 m). The North Atlantic Ocean is used as a reference site, with a sea depth of 45 meters. The tripod and jacket support structures will be designed by using current industry standards. Keywords: [Fatigue evaluation, North Atlantic Ocean and Failure].
Estilos ABNT, Harvard, Vancouver, APA, etc.
16

Hossin, M., e H. Marzouk. "Crack spacing for offshore structures". Canadian Journal of Civil Engineering 35, n.º 12 (dezembro de 2008): 1446–54. http://dx.doi.org/10.1139/l08-073.

Texto completo da fonte
Resumo:
The main focus of this investigation is directed toward the examination of crack-spacing expressions suitable for offshore concrete structure applications. Offshore structures are unique structures that are constantly exposed to harsh environmental conditions, including exposure to seawater and sea spray. The splash zone of an offshore structure is the section of the platform that is the most exposed to both a harsh marine environment and seawater. The design of offshore structures is controlled by mandatory design codes to ensure structural safety and integrity. Most of the available expressions for crack spacing were developed for building structures using normal-strength concrete and normal concrete cover. However, offshore structures are built using high-strength concrete with a thick concrete cover. Very little information is published on the crack analysis of high-strength concrete with a thick concrete cover for offshore applications. An experimental testing program was designed to examine the effects of concrete cover and the bar spacing of normal- and high-strength concrete on crack spacing. The different code expressions are evaluated with respect to the experimental results.
Estilos ABNT, Harvard, Vancouver, APA, etc.
17

Denney, Dennis. "Onshore Decommissioning of Offshore Structures". Journal of Petroleum Technology 50, n.º 04 (1 de abril de 1998): 70–71. http://dx.doi.org/10.2118/0498-0070-jpt.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
18

Marshall, Peter W. "Interdisciplinary Aspects of Offshore Structures". Marine Technology Society Journal 39, n.º 3 (1 de setembro de 2005): 99–115. http://dx.doi.org/10.4031/002533205787442530.

Texto completo da fonte
Resumo:
While some institutions treat Ocean Engineering as a single discipline, much of the progress in this area has been brought about by the interdisciplinary collaboration of experts in different areas, such as:Structural engineering Mineral resourcesOcean energy Offshore economic potentialRemotely operated vehicles Marine law & policyDynamic positioning Marine educationMoorings Marine materialsSeafloor engineering Physical oceanography/meteorologyLarge offshore platforms are usually designed by teams of engineers. Although the lead engineer often may be a structural engineer, many elements of the other technologies are involved. This paper is an update to earlier summaries by Marshall (1980, 1993), but retains many of the pre-Internet classic references. Papers from the Offshore Technology Conference are listed separately, and cited by OTC number.
Estilos ABNT, Harvard, Vancouver, APA, etc.
19

Ole Olsen, T. "Recycling of offshore concrete structures". Structural Concrete 2, n.º 3 (setembro de 2001): 169–73. http://dx.doi.org/10.1680/stco.2001.2.3.169.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
20

Bertram, Volker. "Flow Simulations for Offshore Structures". Ship Technology Research 57, n.º 1 (janeiro de 2010): 74–78. http://dx.doi.org/10.1179/str.2010.57.1.007.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
21

Brandi, R., e P. Rossetto. "Fatigue design of offshore structures". Welding International 1, n.º 12 (janeiro de 1987): 1155–61. http://dx.doi.org/10.1080/09507118709452166.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
22

Norman, J. N., B. N. Ballantine, J. A. Brebner, B. Brown, S. J. Gauld, J. Mawdsley, C. Roythorne, M. J. Valentine e S. E. Wilcock. "Medical evacuations from offshore structures." Occupational and Environmental Medicine 45, n.º 9 (1 de setembro de 1988): 619–23. http://dx.doi.org/10.1136/oem.45.9.619.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
23

Molin,, B., e JH Ferziger,. "Hydrodynamique des Structures Offshore. (French)". Applied Mechanics Reviews 56, n.º 2 (1 de março de 2003): B29. http://dx.doi.org/10.1115/1.1553447.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
24

Konovessis, Dimitris, Kie Hian Chua e Dracos Vassalos. "Stability of floating offshore structures". Ships and Offshore Structures 9, n.º 2 (17 de janeiro de 2013): 125–33. http://dx.doi.org/10.1080/17445302.2012.747270.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
25

Chen, W. F., D. J. Han e H. Saunders. "Tubular Members in Offshore Structures". Journal of Vibration and Acoustics 111, n.º 4 (1 de outubro de 1989): 496–98. http://dx.doi.org/10.1115/1.3269893.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
26

Froud, S. V. "Chameleon trusts in offshore structures". Trusts & Trustees 11, n.º 4 (1 de março de 2005): 27–29. http://dx.doi.org/10.1093/tandt/11.4.27.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
27

Redwood, Richard G. "Tubular members in offshore structures". Canadian Journal of Civil Engineering 13, n.º 3 (1 de junho de 1986): 399–400. http://dx.doi.org/10.1139/l86-058.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
28

Liaw, Chih‐Young. "Subharmonic Response of Offshore Structures". Journal of Engineering Mechanics 113, n.º 3 (março de 1987): 366–77. http://dx.doi.org/10.1061/(asce)0733-9399(1987)113:3(366).

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
29

Anderson, M. R. "Nondestructive testing of offshore structures". NDT International 20, n.º 1 (fevereiro de 1987): 17–21. http://dx.doi.org/10.1016/0308-9126(87)90368-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
30

Anderson, M. "Nondestructive testing of offshore structures". NDT & E International 20, n.º 1 (fevereiro de 1987): 17–21. http://dx.doi.org/10.1016/0963-8695(87)90247-7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
31

Chen, W. F., e I. S. Sohal. "Cylindrical members in offshore structures". Thin-Walled Structures 6, n.º 3 (janeiro de 1988): 153–285. http://dx.doi.org/10.1016/0263-8231(88)90010-9.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
32

Willemsen, E. "Aerodynamic aspects of offshore structures". Journal of Wind Engineering and Industrial Aerodynamics 44, n.º 1-3 (outubro de 1992): 2511–22. http://dx.doi.org/10.1016/0167-6105(92)90042-9.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
33

Harding, J. E. "Integrity of offshore structures—3". Journal of Constructional Steel Research 11, n.º 2 (janeiro de 1988): 143–44. http://dx.doi.org/10.1016/0143-974x(88)90048-x.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
34

Ellinas, Charles P. "Floating Structures and Offshore Operations". Applied Ocean Research 11, n.º 2 (abril de 1989): 112. http://dx.doi.org/10.1016/0141-1187(89)90014-x.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
35

Faltinsen, O. M. "Wave Loads on Offshore Structures". Annual Review of Fluid Mechanics 22, n.º 1 (janeiro de 1990): 35–56. http://dx.doi.org/10.1146/annurev.fl.22.010190.000343.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
36

Rogers, L. M. "Monitoring fatigue in offshore structures". NDT & E International 25, n.º 6 (dezembro de 1992): 302. http://dx.doi.org/10.1016/0963-8695(92)90760-e.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
37

Harleman, Donald R. F., William C. Nolan e Vernon C. Honsinger. "DYNAMIC ANALYSIS OF OFFSHORE STRUCTURES". Coastal Engineering Proceedings 1, n.º 8 (29 de janeiro de 2011): 28. http://dx.doi.org/10.9753/icce.v8.28.

Texto completo da fonte
Resumo:
Analytical procedures are presented for calculation of the dynamic displacements of fixed offshore structures in oscillatory waves. The structure considered has four legs in a square configuration with waves impinging normal to one side; however, the procedures are general and may be applied to other configurations and wave directions. The horizontal displacement of the deck is determined as a function of time by application of vibration theory for a damped, spring-mass system subject to a harmonic force. The instantaneous wave force on each leg is composed of a hydrodynamic drag component and an inertial component as in the usual "statical" wave force analysis. The wave force expression is approximated by a Fourier series which permits calculation of the platform displacement by superposition of solutions of the equation of motion for the platform. Depending on the ratio of the wave frequency to the natural frequency of the platform, the structural stresses may be considerably high* than those found by methods which neglect the elastic behavior of the structure. The highest wave to be expected in a given locality is not necessarily the critical design wave. Maximum displacements and structural stresses may occur for smaller waves having periods producing a resonant response of the platform. Displacement measurements in a wave tank using a platform constructed of plastic are presented to show the validity of the analytical method. Both small and finite amplitude waves are used over a wide range of frequency ratios. A digital computer program (7090 FORTRAN) is used for the displacement calculation.
Estilos ABNT, Harvard, Vancouver, APA, etc.
38

Dharmavasan, S. "Tubular members in offshore structures". Engineering Structures 8, n.º 3 (julho de 1986): 215–16. http://dx.doi.org/10.1016/0141-0296(86)90056-8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
39

Eatock Taylor, R. "Floating structures and offshore operations". Engineering Structures 11, n.º 4 (outubro de 1989): 290. http://dx.doi.org/10.1016/0141-0296(89)90048-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
40

Gates, Andrew R., e Daniel O. B. Jones. "Ecological role of offshore structures". Nature Sustainability 7, n.º 4 (24 de abril de 2024): 383–84. http://dx.doi.org/10.1038/s41893-024-01316-8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
41

Juma, Ibrahim Mohammad, Sankarbabu Karanam e Alya Abdulrahim Al Harmoudi. "APPLICATION OF COMPOSITE GROYNES IN STABILIZING DUBAI BEACHES". Coastal Engineering Proceedings, n.º 36 (30 de dezembro de 2018): 8. http://dx.doi.org/10.9753/icce.v36.structures.8.

Texto completo da fonte
Resumo:
The increase in demand for waterfront living has led to the development of large-scale offshore reclamation projects - The Palm Jumeirah, The World etc., rapidly transforming the coastal zone of Dubai. Development of such offshore islands have interfered with the coastal processes causing reorientation of shorelines at several stretches of Dubai coast (Mangor et al 2008). Regular beach nourishment programs to maintain the required minimum beach width for recreational activities was found to be ineffective due to non-availability of beach quality sand and environmental impacts of dredging and sand shifting operations.
Estilos ABNT, Harvard, Vancouver, APA, etc.
42

Tomasicchio, Giuseppe Roberto, Elvira Armenio, Felice D'Alessandro, Nuno Fonseca, Spyros A. Mavrakos, Valery Penchev, Holger Schuttrumpf, Spyridon Voutsinas, Jens Kirkegaard e Palle M. Jensen. "DESIGN OF A 3D PHYSICAL AND NUMERICAL EXPERIMENT ON FLOATING OFF-SHORE WIND TURBINES". Coastal Engineering Proceedings 1, n.º 33 (14 de dezembro de 2012): 67. http://dx.doi.org/10.9753/icce.v33.structures.67.

Texto completo da fonte
Resumo:
The knowledge of the behavior of floating offshore wind turbines (W/T) under wave and/or wind action remains one of the most difficult challenges in offshore engineering which is mostly due to the highly non-linear response of the structure. The present study describes the design process of a 3D physical experiment to investigate the behavior of the most promising structure technology of floating W/T: spar buoy (SB) and tension leg platform (TLP) under different meteo conditions. In order to properly design the two W/T models, the following topics have been analyzed: mooring lines, mass distribution, appropriate scaling factor and data relative to the geometrical characteristics, wave basin dimensions and wind and waves conditions. In addition, the Smoothed Particle Hydrodynamics method (SPH) (Monaghan 1994) has been considered to simulate the 3D behavior of a floating offshore W/T. In particular, the SPH, calibrated and verified on the basis of the experimental observations, may represent a reliable tool for preliminary test of changes in the floater geometry.
Estilos ABNT, Harvard, Vancouver, APA, etc.
43

Kashima, Hiroaki, e Haruo Yoneyama. "DYNAMIC RESPONSE OF 5, 10 AND 15 MW FIXED-BOTTOM OFFSHORE WIND TURBINES IN WIND AND WAVES". Coastal Engineering Proceedings, n.º 37 (2 de outubro de 2023): 54. http://dx.doi.org/10.9753/icce.v37.structures.54.

Texto completo da fonte
Resumo:
In recent years, the offshore wind turbine industry has become more active in response to the movement toward carbon neutrality by 2050, and technological development of large-scale offshore wind turbines (OWTs) with improved power generation efficiency and high economic efficiency has progressed. However, little is known about their response characteristics and the relationship between the scale of power generation and the response characteristics of OWTs. The purpose of this study is to clarify the differences in the dynamic response of fixed-bottom OWTs with different power generation scales in wind and waves through load-coupled analysis.
Estilos ABNT, Harvard, Vancouver, APA, etc.
44

Amaechi, Chiemela Victor, Ahmed Reda, Harrison Obed Butler, Idris Ahmed Ja’e e Chen An. "Review on Fixed and Floating Offshore Structures. Part I: Types of Platforms with Some Applications". Journal of Marine Science and Engineering 10, n.º 8 (5 de agosto de 2022): 1074. http://dx.doi.org/10.3390/jmse10081074.

Texto completo da fonte
Resumo:
Diverse forms of offshore oil and gas structures are utilized for a wide range of purposes and in varying water depths. They are designed for unique environments and water depths around the world. The applications of these offshore structures require different activities for proper equipment selection, design of platform types, and drilling/production methods. This paper will provide a general overview of these operations as well as the platform classifications. In this paper, a comprehensive review is conducted on different offshore petroleum structures. This study examines the fundamentals of all types of offshore structures (fixed and floating), as well as the applications of these concepts for oil exploration and production. The study also presents various design parameters for state-of-the-art offshore platforms and achievements made in the industry. Finally, suitable types of offshore platforms for various water depths are offered for long-term operations. An extension of this study (Part II) covers sustainable design approaches and project management on these structures; this review helps designers in understanding existing offshore structures, and their uniqueness. Hence, the review also serves as a reference data source for designing new offshore platforms and related structures.
Estilos ABNT, Harvard, Vancouver, APA, etc.
45

Saperski, Marek. "Technology of Welding Large-sized Rings of Offshore Structures". Biuletyn Instytutu Spawalnictwa, n.º 6 (2015): 46–51. http://dx.doi.org/10.17729/ebis.2015.6/6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
46

TUDORACHE, VALENTIN-PAUL, LAZAR AVRAM e NICULAE-NAPOLEON ANTONESCU. "Aspects on offshore drilling process in deep and very deep waters". Journal of Engineering Sciences and Innovation 5, n.º 12 (3 de junho de 2020): 157–72. http://dx.doi.org/10.56958/jesi.2020.5.2.7.

Texto completo da fonte
Resumo:
"Offshore is a broad concept and therefore in this article offshore refers to drilling wells of oil and gas in the hydrocarbons deposits located deep from the seabed. Oil and gas is drilled wells with help of different offshore structures, for example rigs and vessels. Offshore drilling is a complex process where a borehole is drilled through the seabed. Of course, offshore refers to energy activity located at a distance from the shore. Oil and natural gas is located below the bedrock, which makes it difficult to extract them. A limited amount of inland oil has driven oil industry to the seas to find more oil deposits. There are high financial markets in the offshore industry and that is why much money is being invested in new offshore structures all around the world. Offshore structures are constructed for many different purposes worldwide. The structures are expensive to construct but there is an opportunity to have significant financial profit. "
Estilos ABNT, Harvard, Vancouver, APA, etc.
47

Pfoertner, Saskia, Hocine Oumeraci, Matthias Kudella e Andreas Kortenhaus. "WAVE LOADS AND STABILITY OF NEW FOUNDATION STRUCTURE FOR OFFSHORE WIND TURBINES MADE OF OCEAN BRICK SYSTEM (OBS)". Coastal Engineering Proceedings 1, n.º 32 (30 de janeiro de 2011): 66. http://dx.doi.org/10.9753/icce.v32.structures.66.

Texto completo da fonte
Resumo:
The Ocean Brick System (OBS) is a modular system consisting of hollow concrete precast blocs (10m x 10m x 10m) piled up like cubes and interconnected to create a stiff, light and strong structure which can be used for artificial islands, artificial reefs, elevation of vulnerable low lands, deep water ports, breakwaters and foundation of offshore wind turbines. The paper focuses on the experimental results on the wave loading and the stability of the OBS used as a foundation of the support structure of offshore wind turbines. Diagrams for the prediction of total horizontal forces, vertical forces and overturning moments induced by irregular waves on the OB-structure are derived and verified through additional stability tests and stability analysis.
Estilos ABNT, Harvard, Vancouver, APA, etc.
48

Gao, Feng, Clive Mingham e Derek Causon. "SIMULATION OF EXTREME WAVE INTERACTION WITH MONOPILE MOUNTS FOR OFFSHORE WIND TURBINES". Coastal Engineering Proceedings 1, n.º 33 (15 de outubro de 2012): 22. http://dx.doi.org/10.9753/icce.v33.structures.22.

Texto completo da fonte
Resumo:
Extreme wave run-up and impacts on monopile foundations may cause unexpected damage to offshore wind farm facilities and platforms. To assess the forces due to wave run-up, the distribution of run-up around the pile and the maximum wave run-up height need to be known. This paper describes a numerical model AMAZON-3D study of wave run-up and wave forces on offshore wind turbine monopile foundations, including both regular and irregular waves. Numerical results of wave force for regular waves are in good agreement with experimental measurement and theoretical results, while the maximum run-up height are little higher than predicted by linear theory and some empirical formula. Some results for irregular wave simulation are also presented.
Estilos ABNT, Harvard, Vancouver, APA, etc.
49

Enomoto, Yota, Katsuya Hamachi e Taro Arikawa. "SCALE EFFECT IN LOCAL SCOUR AROUND AN OFFSHORE PILE". Coastal Engineering Proceedings, n.º 37 (1 de setembro de 2023): 88. http://dx.doi.org/10.9753/icce.v37.structures.88.

Texto completo da fonte
Resumo:
Accurately predicting scour is important for its prevention around the foundations of offshore wind turbines. Many studies on local scour around piles have been conducted. Chen et al. (2022) conducted scour analysis using largescale experiments and examined the maximum scour depth. However, the relationship between scour depth and time has not yet been investigated. Furthermore, only a few studies have comprehensively examined the scale effects and similarity laws. In this study, experiments for analyzing local scour around a pile were conducted at different scales, 1/13, 1/65, and 1/130, to verify the scale effects and corresponding similarity laws regarding scouring time.
Estilos ABNT, Harvard, Vancouver, APA, etc.
50

Ntaskagianni, Vasiliki. "Aluminium in Modular Structures for Offshore Lifts". Key Engineering Materials 710 (setembro de 2016): 402–5. http://dx.doi.org/10.4028/www.scientific.net/kem.710.402.

Texto completo da fonte
Resumo:
Offshore lifts can be performed by platform cranes, crane vessels, helicopters or modular structures. The challenge of an offshore lift lies in performing it in inaccessible locations on the platform and minimizing the cost and the offshore time. Platform cranes often cannot reach the lifting object, and crane vessels and helicopters provide solutions which increase the operation costs. On the contrary, aluminium modular structures provide solutions which can make a challenging lift efficient and successful without incurring high costs.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia