Artigos de revistas sobre o tema "Non-Standard bending test"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Non-Standard bending test".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Liu, Chao, Ning Ding, Jingsong Duan, Lili Zhou, Shanfu Cui, Shuna Jiang e Aofei Li. "Precise mathematical model for the ratchet tooth root bending stress". Mechanical Sciences 12, n.º 2 (20 de dezembro de 2021): 1105–13. http://dx.doi.org/10.5194/ms-12-1105-2021.
Texto completo da fonteKalia, Ajit, Juhi Joshi, Mohammed Mandsaurwala, Sayali Bobade e Azmat Azha Khan. "Esthetic nickel titanium wires– Do they deliver the same force?" IP Indian Journal of Orthodontics and Dentofacial Research 8, n.º 4 (15 de dezembro de 2022): 260–66. http://dx.doi.org/10.18231/j.ijodr.2022.045.
Texto completo da fonteChai, Teck Jung, Tan Cher Siang, Tang Hing Kwong e Koh Heng Boon. "Bending Strength of Magnesium Oxide Board". Key Engineering Materials 879 (março de 2021): 169–78. http://dx.doi.org/10.4028/www.scientific.net/kem.879.169.
Texto completo da fonteKunecký, Jiří, Václav Sebera, Jan Tippner, Hana Hasníková, Michal Kloiber, Anna Arciszewska-Kędzior e Jaromír Milch. "Mechanical Performance and Contact Zone of Timber Joint With Oblique Faces". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 63, n.º 4 (2015): 1153–59. http://dx.doi.org/10.11118/actaun201563041153.
Texto completo da fonteKosior-Kazberuk, Marta, e Rafał Wasilczyk. "Influence of static long-term loads and cyclic freezing/thawing on the behaviour of concrete beams reinforced with BFRP and HFRP bars". MATEC Web of Conferences 174 (2018): 04013. http://dx.doi.org/10.1051/matecconf/201817404013.
Texto completo da fonteSusanto, Eko, Yulian Maheswara e Akhmad Basuki Widodo. "Bending Strength of Apus Bamboo Fiber Reinforced Asphalt Composite Materials as Small Ship". BERKALA SAINSTEK 10, n.º 4 (10 de dezembro de 2022): 195. http://dx.doi.org/10.19184/bst.v10i4.32604.
Texto completo da fonteVu, Ngoc-Hung, Xuan-Tan Pham, Vincent François e Jean-Christophe Cuillière. "Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, n.º 17 (7 de julho de 2019): 6167–76. http://dx.doi.org/10.1177/0954406219861126.
Texto completo da fonteDeTora, M., e K. Kraus. "Mechanical testing of 3.5 mm locking and non-locking bone plates". Veterinary and Comparative Orthopaedics and Traumatology 21, n.º 04 (2008): 318–22. http://dx.doi.org/10.3415/vcot-07-04-0034.
Texto completo da fonteConcli, Franco. "Numerical Study of the Impact of Shot Peening on the Tooth Root Fatigue Performances of Gears Using Critical Plane Fatigue Criteria". Applied Sciences 12, n.º 16 (18 de agosto de 2022): 8245. http://dx.doi.org/10.3390/app12168245.
Texto completo da fonteFuentes-Talavera, F. J., J. A. Silva-Guzmán, R. Rodríguez-Anda, M. G. Lomelí-Ramírez, R. Sanjuán-Dueñas e H. G. Richter. "Strength properties and natural durability of Avocado (Persea americana Mill.) branch wood". Madera y Bosques 17, n.º 1 (30 de agosto de 2016): 37–47. http://dx.doi.org/10.21829/myb.2011.1711153.
Texto completo da fonteMa, Yifan, Yazhi Li e Lu Liu. "Off-Axis Tension Behaviour of Unidirectional PEEK/AS4 Thermoplastic Composites". Applied Sciences 13, n.º 6 (9 de março de 2023): 3476. http://dx.doi.org/10.3390/app13063476.
Texto completo da fonteTrinidad-Fernández, Manuel, David Beckwée, Antonio Cuesta-Vargas, Manuel González-Sánchez, Francisco-Angel Moreno, Javier González-Jiménez, Erika Joos e Peter Vaes. "Validation, Reliability, and Responsiveness Outcomes of Kinematic Assessment with an RGB-D Camera to Analyze Movement in Subacute and Chronic Low Back Pain". Sensors 20, n.º 3 (27 de janeiro de 2020): 689. http://dx.doi.org/10.3390/s20030689.
Texto completo da fonteTeder, Marko, Kalle Pilt, Matis Miljan, Vello Pallav e Jaan Miljan. "INVESTIGATION OF THE PHYSICAL-MECHANICAL PROPERTIES OF TIMBER USING ULTRASOUND EXAMINATION". Journal of Civil Engineering and Management 18, n.º 6 (20 de novembro de 2012): 795–801. http://dx.doi.org/10.3846/13923730.2012.736233.
Texto completo da fonteJin, Ai Hua, e Bai Shou Li. "Research on Axial Behavior of Thin-Walled T-Shaped Steel Stub Columns Filled with Recycled Demolished Concrete Lump". Advanced Materials Research 690-693 (maio de 2013): 881–85. http://dx.doi.org/10.4028/www.scientific.net/amr.690-693.881.
Texto completo da fonteCasado, Milagros, Luis Acuña, Luis-Alfonso Basterra, Gemma Ramón-Cueto e Daniel Vecilla. "Grading of structural timber of Populus × euramericana clone I-214". Holzforschung 66, n.º 5 (1 de julho de 2012): 633–38. http://dx.doi.org/10.1515/hf-2011-0153.
Texto completo da fonteShmulsky, Rubin, Laurice Mara Spinelli Correa e Franklin Quin. "Strength and stiffness of 3-ply industrial bamboo matting". BioResources 16, n.º 3 (1 de agosto de 2021): 6392–400. http://dx.doi.org/10.15376/biores.16.3.6392-6400.
Texto completo da fonteLandowski, Michał, Aleksandra Świerczyńska, Grzegorz Rogalski e Dariusz Fydrych. "Autogenous Fiber Laser Welding of 316L Austenitic and 2304 Lean Duplex Stainless Steels". Materials 13, n.º 13 (30 de junho de 2020): 2930. http://dx.doi.org/10.3390/ma13132930.
Texto completo da fonteŽivčák, Jozef, Martin Petrík, Radovan Hudák, Teodor Tóth, Dusan Knezo e Eva Kovalova. "Embedded Tensile Strenght Test Machine FM1000 – An Upgrade of Measurement and Control". Solid State Phenomena 147-149 (janeiro de 2009): 657–62. http://dx.doi.org/10.4028/www.scientific.net/ssp.147-149.657.
Texto completo da fonteMay, Nguyen Huu, Huynh Trong Phuoc, Le Thanh Phieu, Ngo Van Anh, Chau Minh Khai e Le Nong. "Recycling of waste incineration bottom ash in the production of interlocking concrete bricks". Journal of Science and Technology in Civil Engineering (STCE) - NUCE 15, n.º 2 (15 de abril de 2021): 101–12. http://dx.doi.org/10.31814/stce.nuce2021-15(2)-09.
Texto completo da fonteŠmídová, Eliška, e Petr Kabele. "CONSTITUTIVE MODEL FOR TIMBER FRACTURE USED FOR FE SIMULATION OF LVL ARCH". Acta Polytechnica CTU Proceedings 15 (31 de dezembro de 2018): 109–13. http://dx.doi.org/10.14311/app.2018.15.0109.
Texto completo da fontePokorska, Iwona, Mariusz Poński, Wojciech Kubissa, Tomasz Libura, Adam Brodecki e Zbigniew Kowalewski. "Computational Fracture Evolution Analysis of Steel-Fiber-Reinforced Concrete Using Concrete Continuous Damage and Fiber Progressive Models". Materials 16, n.º 16 (15 de agosto de 2023): 5635. http://dx.doi.org/10.3390/ma16165635.
Texto completo da fonteSkarzynski, Ł., e J. Tejchman. "Numerical Mesoscopic Analysis of Fracture in Fine-Grained Concrete". Archives of Civil Engineering 58, n.º 3 (1 de setembro de 2012): 331–61. http://dx.doi.org/10.2478/v.10169-012-0019-7.
Texto completo da fonteCarreira, Marcelo Rodrigo, Pedro Gutemberg de Alcântara Segundinho, Fabricio Gomes Gonçalves, Juarez Benigno Paes, Antônio Alves Dias, Pedro Nicó de Medeiros Neto, Leonor da Cunha Mastela e Yonny Martinez Lopez. "Influence of moisture content on the dynamic modulus of elasticity". Research, Society and Development 11, n.º 11 (21 de agosto de 2022): e232111133687. http://dx.doi.org/10.33448/rsd-v11i11.33687.
Texto completo da fonteJamshidi Avanaki, Mohammad, Mohammad Abedi e Abdollah Hoseini. "Stress-Strain Constitutive Material Models for Hybrid Steel Fiber Reinforced Concrete". Journal of Civil Engineering and Construction 9, n.º 2 (15 de maio de 2020): 74–82. http://dx.doi.org/10.32732/jcec.2020.9.2.74.
Texto completo da fonteCho, Seong-Mook, Brian G. Thomas, Jong-Yeon Hwang, Jong-Geun Bang e Il-Sin Bae. "Modeling of Inclusion Capture in a Steel Slab Caster with Vertical Section and Bending". Metals 11, n.º 4 (17 de abril de 2021): 654. http://dx.doi.org/10.3390/met11040654.
Texto completo da fonteYan, Zhao. "Research New Waterproof Agent of the Particleboard". Advanced Materials Research 960-961 (junho de 2014): 43–46. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.43.
Texto completo da fonteSimegnaw, Abdella Ahmmed, Yetanawork Teyeme, Benny Malengier, Tamrat Tesfaye, Hundessa Daba, Kaledawit Esmelealem e Lieva Van Langenhove. "Smart Shirt for Measuring Trunk Orientation". Sensors 22, n.º 23 (23 de novembro de 2022): 9090. http://dx.doi.org/10.3390/s22239090.
Texto completo da fonteSauri, Fauzan, e Mulianti Mulianti. "The Effect of Preheating and Non-Preheating in Cast Iron Welding Toward Mechanical Properties". Teknomekanik 3, n.º 2 (10 de dezembro de 2020): 70–74. http://dx.doi.org/10.24036/teknomekanik.v3i2.7272.
Texto completo da fonteBahtiar, Effendi Tri, Erizal Erizal, Dede Hermawan, Naresworo Nugroho e Rizky Hidayatullah. "Experimental Study of Beam Stability Factor of Sawn Lumber Subjected to Concentrated Bending Loads at Several Points". Forests 13, n.º 9 (14 de setembro de 2022): 1480. http://dx.doi.org/10.3390/f13091480.
Texto completo da fonteZhang, Qin, Song Mao, Mao Jiang, Xiao Dong Chen e Wei Cheng. "Experiment on Decarburization of High Carbon Fly Ash and Preparation of Concrete". Advanced Materials Research 881-883 (janeiro de 2014): 1250–54. http://dx.doi.org/10.4028/www.scientific.net/amr.881-883.1250.
Texto completo da fonteSuwanasri, Cattareeya, Thanapong Suwanasri e Phanupong Fuangpian. "Investigation on Partial Discharge of Power Cable Termination Defects using High Frequency Current Transformer". ECTI Transactions on Electrical Engineering, Electronics, and Communications 12, n.º 1 (19 de novembro de 2013): 16–23. http://dx.doi.org/10.37936/ecti-eec.2014121.170810.
Texto completo da fontevan Blokland, Joran, Stergios Adamopoulos e Sheikh Ali Ahmed. "Performance of Thermally Modified Spruce Timber in Outdoor Above-Ground Conditions: Checking, Dynamic Stiffness and Static Bending Properties". Applied Sciences 10, n.º 11 (8 de junho de 2020): 3975. http://dx.doi.org/10.3390/app10113975.
Texto completo da fonteKrzosek, Sławomir, Marek Grześkiewicz, Izabela Burawska Kupniewska, Piotr Mańkowski e Marek Wieruszewski. "MECHANICAL PROPERTIES OF POLISH-GROWN PINUS SYLVESTRIS L. STRUCTURAL SAWN TIMBER FROM THE BUTT, MIDDLE AND TOP LOGS". WOOD RESEARCH 66(2): 2021 66, n.º 2 (30 de abril de 2021): 231–42. http://dx.doi.org/10.37763/wr.1336-4561/66.2.231242.
Texto completo da fonteAdamczak-Bugno, Anna, Grzegorz Świt e Aleksandra Krampikowska. "Fibre-Cement Panel Ventilated Façade Smart Control System". Materials 14, n.º 17 (5 de setembro de 2021): 5076. http://dx.doi.org/10.3390/ma14175076.
Texto completo da fonteZhang, Hou Jiang, Lei Zhu, Yan Liang Sun, Xi Ping Wang e Hai Cheng Yan. "Determining Modulus of Elasticity of Ancient Structural Timber". Advanced Materials Research 217-218 (março de 2011): 407–12. http://dx.doi.org/10.4028/www.scientific.net/amr.217-218.407.
Texto completo da fonteGajewski, Tomasz, Tomasz Garbowski, Natalia Staszak e Małgorzata Kuca. "Crushing of Double-Walled Corrugated Board and Its Influence on the Load Capacity of Various Boxes". Energies 14, n.º 14 (17 de julho de 2021): 4321. http://dx.doi.org/10.3390/en14144321.
Texto completo da fonteFu, Baofei, Chenzhuo Li, Bo Dong e Pan Ou. "Enhanced Digital Gradient Sensing Using Backlight Digital Speckle Target". Sensors 20, n.º 22 (17 de novembro de 2020): 6557. http://dx.doi.org/10.3390/s20226557.
Texto completo da fonteİşleyen, Ümmü K., Rahim Ghoroubi, Ömer Mercimek, Özgür Anil e Recep Tuğrul Erdem. "Behavior of glulam timber beam strengthened with carbon fiber reinforced polymer strip for flexural loading". Journal of Reinforced Plastics and Composites 40, n.º 17-18 (9 de abril de 2021): 665–85. http://dx.doi.org/10.1177/0731684421997924.
Texto completo da fonteRakhmanov, V. A., V. I. Melikhov e A. A. Safonov. "Wind loads tests of external walls blocks masonry of noncombustible polystyrene concrete". Concrete and Reinforced Concrete 617, n.º 3 (31 de julho de 2023): 15–23. http://dx.doi.org/10.37538/0005-9889-2023-3(617)-15-23.
Texto completo da fonteAhmad, Bilal, e Xiangfan Fang. "Modeling Shear Behavior of Woven Fabric Thermoplastic Composites for Crash Simulations". Applied Composite Materials 27, n.º 6 (20 de novembro de 2020): 739–65. http://dx.doi.org/10.1007/s10443-020-09844-0.
Texto completo da fonteLolli, S., A. Hidalgo, C. Alamprese, V. Ferrante e M. Rossi. "Layer performances, eggshell characteristics and bone strength in three different housing systems". Biotehnologija u stocarstvu 29, n.º 4 (2013): 591–606. http://dx.doi.org/10.2298/bah1304591l.
Texto completo da fonteSubramanya, N., A. R. Satheesh Kumar, D. G. Visakh e K. Balasubramanya. "Certification of welder for tungsten inert gas welding in unmanned aerial vehicle systems". IOP Conference Series: Materials Science and Engineering 1291, n.º 1 (1 de setembro de 2023): 012036. http://dx.doi.org/10.1088/1757-899x/1291/1/012036.
Texto completo da fonteBui, Tien Thanh, Guido De Roeck, Jeroen Van Wittenberghe, Patrick De Baets e Wim De Waele. "Fatigue damage identification in threaded connection of tubular structures through in-situ modal tests". International Journal Sustainable Construction & Design 2, n.º 2 (6 de novembro de 2011): 207–2016. http://dx.doi.org/10.21825/scad.v2i2.20518.
Texto completo da fonteBhanushali, J. D., e M. Nithyadharan. "Experimental studies on fiber cement boards under compression loading". Proceedings of the 12th Structural Engineering Convention, SEC 2022: Themes 1-2 1, n.º 1 (19 de dezembro de 2022): 179–86. http://dx.doi.org/10.38208/acp.v1.492.
Texto completo da fonteKauniste, Maarja, Alar Just, Eero Tuhkanen e Targo Kalamees. "Assessment on Strength and Stiffness Properties of Aged Structural Timber". Journal of Sustainable Architecture and Civil Engineering 34, n.º 1 (19 de fevereiro de 2024): 62–74. http://dx.doi.org/10.5755/j01.sace.34.1.35534.
Texto completo da fonteCarvalho, Ronaldo Lúís Almeida de, Estevão Tomomitsu Kimpara, Eduardo Bresciani, Márcia Carneiro Valera e Renata Marques Melo. "Effect of thermocycling aging on the flexural strength of feldspathic ceramic". Brazilian Dental Science 21, n.º 3 (1 de agosto de 2018): 315. http://dx.doi.org/10.14295/bds.2018.v21i3.1554.
Texto completo da fonteFajrin, Jauhar, Ni Nyoman Kencanawati, Miko Eniarti e Arismanto Arismanto. "Core Configuration Effect On The Flexural Behaviour Of Sandwich Panel Made Of Aluminium Skin And Sengon Wood Core". Jurnal Rekayasa Sipil (JRS-Unand) 17, n.º 3 (26 de fevereiro de 2022): 186. http://dx.doi.org/10.25077/jrs.17.3.186-193.2021.
Texto completo da fonteAl-Qahtani, Amal S., Huda I. Tulbah, Mashael Binhasan, Maria S. Abbasi, Naseer Ahmed, Sara Shabib, Imran Farooq et al. "Surface Properties of Polymer Resins Fabricated with Subtractive and Additive Manufacturing Techniques". Polymers 13, n.º 23 (24 de novembro de 2021): 4077. http://dx.doi.org/10.3390/polym13234077.
Texto completo da fonteMoh, Eun Ho, Kyo Shik Park, Jeong Woo Jo e Myeong Hui Yu. "A Study on the Improvement of Safety Management by Improving the Production Quality of PC(Precast Concrete) : PC Slab Falling Accident in Construction of Logistics Warehouse". Forum of Public Safety and Culture 19 (30 de novembro de 2022): 15–30. http://dx.doi.org/10.52902/kjsc.2022.19.15.
Texto completo da fonteMikoliūnas, Audrius, e Rimantas Kačianauskas. "STIFFNESS CHARACTERISTICS OF GEOMETRICALLY NON-LINEAR BEAM FINITE ELEMENT/GEOMETRIŠKAI NETIESINIO LENKIAMO STRYPO BAIGTINIO ELEMENTO STANDUMO RODIKLIŲ NUSTATYMAS". JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 3, n.º 10 (30 de junho de 1997): 52–59. http://dx.doi.org/10.3846/13921525.1997.10531684.
Texto completo da fonte