Literatura científica selecionada sobre o tema "New Milford Marble Co"

Mineral assemblages containing Cu-Bi sulfosalts, Bi chalcogenides, and Ag-(Au) tellurides have been identified in the mid-Miocene Zhibula Cu skarn deposit, Gangdese Belt, southern Tibet. Different mineral assemblages from three locations in the deposit, including proximal massive garnet skarn, proximal retrogressed pyroxene-dominant skarn in contact with marble, and distal banded garnet–pyroxene skarn hosted in marble, are studied to constrain the evolution of the mineralization. Hypogene bornite contains elevated Bi (mean 6.73 wt.%) and co-exists in proximal andradite skarn with a second bornite with far lower Bi content, carrollite, Au-Ag tellurides (hessite, petzite), and wittichenite. This assemblage indicates formation at relatively high temperatures (>400 °C) and high fS2 and fTe2 during prograde-stage mineralization. Assemblages of Bi sulfosalts (wittichenite, aikinite, kupčíkite, and paděraite) and bismuth chalcogenides (e.g., tetradymite) in proximal pyroxene skarn are also indicative of formation at relatively high temperatures, but at relatively lower fTe2 and fS2 conditions. Within the reduced distal skarn (chalcopyrite–pyrrhotite-bearing) in marble, cobalt, and nickel occur as discrete minerals: cobaltite, melonite and cobaltic pentlandite. The trace ore mineral signature of the Zhibula skarn and the distributions of precious and critical trace elements such as Ag, Au, Co, Te, Se, and Bi support an evolving magmatic–hydrothermal system in which different parts of the deposit each define ore formation at distinct local physicochemical conditions. This is the first report of kupčíkite and paděraite from a Chinese location. Their compositions are comparable to other occurrences, but conspicuously, they do not form nanoscale intergrowths with one another.

The usage of radiation is mandatory for modern life; in the same manner, controlling the outflow of harmful radiation is vital and could be achieved via employing a shielding material to eliminate any potential nuclear and radiation accidents and incidents. Considering this point, this study aims to manufacture composite samples based on waste marble as novel radiation shields. The physical and radiation shielding ability of the prepared shields were determined and analyzed. For this purpose, a high-purity germanium (HPGe) detector was used to detect the incoming photons emitted from three point sources (Am-241, Cs-137, and Co-60). The radiation attenuation factors for the new marble-based composites were measured for some energies, ranging from 0.06 to 1.333 MeV. We examined the effect of increasing the PbCO3 and CdO contents on the physical properties and radiation attenuation factors of the newly developed radiation shielding absorber. We found that the density of the samples increases from 1.784 to 1.796 g/cm3 when the CdO changes from 0 to 12.5 wt%. The linear attenuation coefficient (LAC) for all marble compositions has the maximum value at 0.06 MeV, while the LAC decreases with increasing energy. The highest LAC was found for Marb-3, with a composition of waste marble (50 wt%), polyester (25 wt%), PbCO3 (17.5 wt%), and CdO (7.5 wt%). We studied the impact of the addition of CdO on the expense of PbCO3 and we found that the half value layer (HVL) decreases with increasing the CdO content. Hence, when there is no space problem, the newly developed radiation shielding absorber can be used to maintain the cost effectiveness and environmentally friendliness of products.

The new species Opiona graeningi is described from caves in the Marble Mountain Wilderness Area, Klamath National Forest, Siskiyou Co., California, as the first troglomorphic species of Opiona, the first troglobiont from the globally important Klamath Siskiyou ecoregion, and possibly the first troglobiotic caseyid. Notes are provided on the composition of the genus Opiona and on the interpretation of the gonopods. Opiona, with 13 described species, may not be monophyletic.

Nano cemented carbide is a new style cutter material. Because its grain size is very small, it is superior to common cemented carbide in properties, such as high hardness, fracture toughness, flexural strength and higher abrasion resistance. It is proposed to have wide application prospect to tools and mould manufacturing, machinery manufacturing, geological drilling, mining, oil field development, etc. In this paper, nanocemented carbide tool was ground with ELID technology, and the marble were cut with nanocemented carbide, and the cutting properties of nanocemented carbide were studied. Results imply that the tool life of nanocemented carbide is 0.5-1 times longer than that of common cemented carbide at low cutting speed. Which means the nanocemented carbide is more suitable for machining hard and brittle material than common cemented carbides at low cutting speed. And the microscopic analysis showed, the mechanism of tool wear is the abrasive wear as well as the shedding of WC hard phase within Co phase caused by the hard spots shed from the marble embedding in the internal part of binder phase Co which is located in the hard phase WC.

Radiodonts, stem-group euarthropods that evolved during the Cambrian explosion, were among the largest and most diversified lower palaeozoic predators. These animals were widespread geographically, occupying a variety of ecological niches, from benthic foragers to nektonic suspension feeders and apex predators. Here, we describe the largest Cambrian hurdiid radiodont known so far, Titanokorys gainesi , gen. et sp. nov., from the Burgess Shale (Marble Canyon, Kootenay National Park, British Columbia). Estimated to reach half a metre in length, this new species bears a very large ovoid-shaped central carapace with distinct short posterolateral processes and an anterior spine. Geometric morphometric analyses highlight the high diversity of carapace shapes in hurdiids and show that Titanokorys bridges a morphological gap between forms with long and short carapaces. Carapace shape, however, is prone to homoplasy and shows no consistent relationship with trophic ecology, as demonstrated by new data, including a reappraisal of the poorly known Pahvantia . Despite distinct carapaces, Titanokorys shares similar rake-like appendages for sediment-sifting with Cambroraster, a smaller but much more abundant sympatric hurdiid from the Burgess Shale . The co-occurrence of these two species on the same bedding planes highlights potential competition for benthic resources and the high diversity of large predators sustained by Cambrian communities.

Literature is the noblest of all the arts. Music dies on the air, or at best exists only in memory; oratory ceases with the effort; the painter’s colors fade and the canvas rots; the marble is dragged from its pedestal and is broken into fragments. Elbert Hubbard At a very early age, we start to develop a sense of playfulness. We touch things, we build things, we break them apart. Soon after we begin to utter words. We babble, we squeal, we try to imitate. Music begins to inform our bodily movements. What develops last and continues to develop throughout our waking lives is connections of words. The essential and characteristic features of words used to describe things within and around us are the hardest to grapple with. The same word can be expressed in different ways and could mean different things in different contexts. Literature, being the written expression of words in its various forms, has progressively shaped our world view. Liberal news outlets around the world have been stressing recurrently that words matter, as the imagination of some politicians’ is set loose and boundaries to what one may say seem not to exist. However, despite this current societal struggle to adhere to facts, namely amid the current pandemic, science has remained irreducible in its systematic approach supported by the scientific method where facts and doubt do co-exist as a process towards the discovery and construction of new knowledge. (...)

The Xitieshan deposit, located in the central segment of the northern margin of the Qaidam Basin, is among the largest massive Pb-Zn sulfide deposits in China. This deposit, along with its ore-bearing rock series known as the Tanjianshan Group, underwent greenschist facies metamorphism due to subsequent orogeny. We investigated the in situ sulfur isotopes of sulfides with different occurrences to define the origin of ore-forming fluids. The δ34S values of sulfides from stratiform ores, massive ores in schist, stockwork ores in marble, schist and discolored altered rocks that constitute a typical double-mineralization structure range from −5.3‰ to +5.6‰ and from −1.7‰ to +32‰, respectively, indicating distinct biological and thermochemical reductions in seawater sulfates. These are similar to the sulfur isotopic characteristics of VSHMS deposits. Pyrite, whose LA-ICP-MS trace element compositions can provide significant information about metallogenic evolution and deposit genesis, is ubiquitous throughout the whole mineralization process. In these stratiform, massive and stockwork ores, three pyrite types were identified: colloform pyrite (Py0), fine-grained anhedral spongy pyrite (Py1) and coarse-grained euhedral pyrite (Py2). The contents of most metallogenic elements, such as Cu, Pb, Zn, Ag, Mo, Mn and Sn, decrease from Py0 to Py2 with the enhancement of metamorphic recrystallization. This suggests that the expelled elements appear as inclusions in primitive pyrite, contributing to the precipitation of new sulfide phases, such as sphalerite and galena. Orogenic metamorphism played an important role in controlling further Pb-Zn enrichment of the Xitieshan deposit. Moreover, there is another mineralization type, primarily occurring as sulfide veins in the undeformed Formation C siltstones of the Tanjianshan Group, which also crosscut early-formed sulfides, showing close-to-zero S isotopic compositions. In this mineralization type, pyrite (Py3) displays high Se/Tl (>10) and Co/Ni (>2.2) ratios, both indicating a minor superimposed post-orogenic magmatic–hydrothermal event.

Trace elements investigated by electron microprobe analysis (EMPA) have been combined with oxygen isotopic composition of pink, red and other colored spinels (blue, purple, brown, orange, lavender) hosted by marbles and found in placers from Luc Yen and An Phu deposits, Yen Bai province, North Vietnam. The deposits are those from Nuoc Ngap, Cong Troi, Bai Son and different placers from the An Phu area. Trace elements such as Fe-Zn-Cr-V in red and pink gem spinels permit to separate those from Cong Troi and those from the others deposits of the An Phu area. Spinels from Cong Troi have low to extremely low Zn (< 500 ppm) and high Fe contents (3,000 to 16,000 ppm) while those from An Phu area are Zn-rich (up to 11,000 ppm). Iron is the dominant element for the other colored spinels whereas Zn, Cr and V contents are extremely variable. The Bai Son blue spinel is Fe-rich (5,000 to 7,200 ppm) with some V (950 to 1,830 ppm), Cr (270 to 480 ppm), Co (240 to 400 ppm) and Ni (550 to 950 ppm). The O-isotope composition of the whole spinels ranges between 12.1 and 24.2‰ (n = 25). Within each deposit, the range of δ18O values for red, pink and colored spinels is usually similar. However, the red and pink spinels from An Phu present two distinct sets of δ18O values, respectively between 13.2 to 17.0‰ (n = 7) and 22.5< δ18O < 24.2 (n = 5). Those from Cong Troi are from 14.8 to 17.7‰ (n = 3) and their range overlaps that of An Phu. The use of O-isotopes is not useful for distinguishing between the deposits, but the low to extremely low Zn content of the Cong Trois spinels is a discriminant. The variation of δ18O values (12.1 <δ18O < 24.2‰) of the whole spinels indicates that the oxygen isotopic compositions of the metamorphic fluids were probably buffered by the local δ18O values of the impure host marbles.ReferencesChauviré B., Rondeau B., Fritsch E., Ressigeac Ph., Devidal J.-L., 2015. Blue spinel from the Luc Yen district of Vietnam. Gems & Gemology, 51, 2-17.D'Ippolito V., Andreozzi G.B., Hålenius H., Skogby H., Hametner K., Günther D., 2015. Colour mechanisms in spinel: cobalt and iron interplay for the blue colour. Physics and Chemistry of Minerals, 42, 431-439.Garnier V., 2003. Les gisements de rubis associés aux marbres de l’Asie Centrale et du Sud-est: genèse et caractérisation isotopique. PhD thesis INPL, Nancy, France, 373p.Garnier, V., Ohnenstetter, D., Giuliani, G., Maluski, H., Deloule, E., Phan Trong Trinh, Pham Van Long, Hoang Quang Vinh, 2005. Age and significance of ruby-bearing marbles from the Red River shear zone, northern Vietnam. The Canadian Mineralogist, 43, 1315-1329.Garnier V., Giuliani G., Ohnenstetter D., Fallick A.E., Dubessy J., Banks D., Hoang Quang Vinh, Lhomme Th., Maluski H., Pêcher A., Bakhsh K.A., Pham Van Long, Phan Trong Trinh, Schwarz D., 2008. Marble-hosted ruby deposits from central and Southeast Asia: towards a new genetic model. Ore Geology Reviews, 34, 169-191.Giuliani G., Fallick A.E., Garnier V., France-Lanord Ch., Ohnenstetter D., Schwarz D., 2005. Oxygen isotope composition as a tracer for the origins of rubies and sapphires. Geology, 33(4), 249-252.Giuliani G., Fallick A.E., Boyce A.J., Pardieu V., Pham Van Long, 2017. Pink and red spinels in marble: trace elements, oxygen isotopes, and sources. The Canadian Mineralogist, 55, 743-761.Hauzenberger C.A., Häeger T., Baumgartner L.P., Hofmeister W., 2001. High-grade metamorphism and stable isotope geochemistry of N-Vietnamese gem-bearing rocks. In: Proceedings of the Workshop on gems and minerals of Vietnam, Hanoi, 124-138.Hauzenberger C.A., Bagola C., Häeger T., Muellen C., Nguyen Ngoc Khoi, Le Thi Thu Huong, 2014. Mineralogy and petrology of the An Phu marble hosted spinel and corundum deposit, Luc Yen, N-Vietnam. In Proceedings of the 4th International Gem and Jewelry Conference, Chiang Mai, Thailand, 76-78.Kleišmantas A., Daukšyte A., 2016. The influence of Vietnam and Sri Lanka spinel mineral chemical elements on colour. Chemija, 27, 45-51.Kretz R., 1983. Symbols for rock-forming minerals. American Mineralogist, 68, 277-279.Le Thi Thu Huong, Häeger T., Hofmeister W., Hauzenberger C., Schwarz D., Pham Van Long, Wehmeister U., Nguyen Ngoc Khoi, Nguy Tuyet Nhung, 2012. Gemstones from Vietnam: An update. Gems & Gemology, 48, 158-176.Malsy A., Klemm L., 2010. Distinction of gem spinels from the Himalayan mountain belt. Chimia, 64(10), 741-746.Malsy A., Karampelas S., Schwarz D., Klemm L., Armbruster T., Tuan Do Anh, 2012. Orangey-red to orangey-pink gem spinels from a new deposit at Lang Chap (Tan Huong - Truc Lau), Vietnam. The Journal of Gemmology, 33, 19-27.Pham Van Long, Hoang Quang Vinh, Garnier V., Giuliani G., Ohnenstetter D., Lhomme,T., Schwarz D., Fallick A.E., Dubessy J., Phan Trong Trinh, 2004. Gem corundum deposits in Vietnam. Journal of Gemmology, 29, 129-147.Pham Van Long, Pardieu V., Giuliani G., Nguy Tuyet Nhung, Pham Thi Thanh Hien, Pham Duc Anh, Nguyen Ngoc Khoi, Hoang Quang Vinh, 2014. Gemmological characteristics of spinel from Luc Yen, Yen Bai. Journal of Geology, 340, 29-36.Pham Van Long, Pardieu V., Giuliani G., 2014. Update on gemstone mining in Luc Yen, Vietnam. Gems & Gemology, 49, 233-245.Pouchou J.L., Pichoir F., 1991. Quantitative analysis of homogeneous or stratified microvolumes applying "PAP" In Electron Probe Quantification (K.F.J. Heinrich & D.E. Newbury eds.). Plenum Press, New York, USA, 31-75.Valley J.W., 1986. Stable isotope geochemistry of metamorphic rocks. Reviews in Mineralogy, 16, 445-481.Yui T.F., Khin Zaw, Wu C.-M., 2008. A preliminary stable isotope study on Mogok ruby, Myanmar. Ore Geology Reviews, 34, 182-199.

The historic Yinggelike nephrite jade deposit in the Altyn Tagh Mountains (Xinjiang, NW China) is renowned for its gem-quality nephrite with its characteristic light-yellow to greenish-yellow hue. Despite the extraordinary gemological quality and commercial significance of the Yinggelike nephrite, little work has been done on this nephrite deposit, due to its geographic remoteness and inaccessibility. This contribution presents the first systematic mineralogical and geochemical studies on the Yinggelike nephrite deposit. Electron probe microanalysis, X-ray fluorescence (XRF) spectrometry, inductively coupled plasma mass spectrometry (ICP-MS) and isotope ratio mass spectrometry were used to measure the mineralogy, bulk-rock chemistry and stable (O and H) isotopes characteristics of samples from Yinggelike. Field investigation shows that the Yinggelike nephrite orebody occurs in the dolomitic marble near the intruding granitoids. Petrographic studies and EMPA data indicate that the nephrite is mainly composed of fine-grained tremolite, with accessory pargasite, diopside, epidote, allanite, prehnite, andesine, titanite, zircon, and calcite. Geochemical studies show that all nephrite samples have low bulk-rock Fe/(Fe + Mg) values (0.02–0.05), as well as low Cr (0.81–34.68 ppm), Co (1.10–2.91 ppm), and Ni (0.52–20.15 ppm) contents. Chondrite-normalized REE patterns of most samples exhibit strong to moderate negative Eu anomalies (0.04–0.67), moderate LREE enrichments, nearly flat HREE patterns, and low ΣREE contents (2.16–11.25 ppm). The nephrite samples have δ18O and δD values of 5.3 to 7.4‰ and –74.9 to –86.7‰, respectively. The mineralogy, bulk-rock chemistry, and O–H isotope characteristics are consistent with the dolomite-related nephrite classification. Based on mineral paragenetic relationships, three possible mineral crystallization stages are recognized: (1) diopside formed by prograde metasomatism; (2) nephrite jade formed by retrograde metasomatism and replacement of Stage I anhydrous minerals; (3) hydrothermal alteration after the nephrite formation. Features of transition metal contents indicate that the color of the Yinggelike nephrite is likely to be controlled by the Fe2+, Fe3+, and Mn. Yellowish color is related to Mn and especially Fe3+, while greenish color is related to Fe2+. Our new mineralogical and geochemical results on the Yinggelike nephrite provide better constraints on the formation of other nephrite deposits in the Altyn Tagh Mountains, and can facilitate future nephrite prospecting and research in the region.

ABSTRACTMaterials with high specific surface areas such as pillared clays and zeolites have been studied and can be used to remediate contaminated water. Chemical functionality or compounds can be anchored or attached to the surface of a low-cost material used as a support matrix. This work studied the suitability of inexpensive natural mineral soils to decontaminate waste water from mine and metallurgic industries. Native mineral soils were also impregnated with commercial 1,3 diphenyltiourea (DFT) to improve retention of heavy metal ions. The natural mineral soils were from Hidalgo State in Mexico: white marble (calcite: CaCO3), volcanic gravels named “red and black tezontles” (anorthite matrix: CaO.Al2O3.(SiO2)2 with FexOy and PbxOy), green zeolites (mordenite: Na2CaK2. OAl2O3.10SiO2.7H2O) and kaolin (kaolinite: Al2O3(SiO2)2.H2O). They were ground and sieved. The 50 mesh fraction was studied by Raman and FTIR spectroscopy, X ray powder diffraction and scanning electronic microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDX). From these solids new hybrid materials were prepared by impregnation with DFT in ethanolic solutions. Products were characterized and compared with untreated materials. Tezontles, zeolites and kaolinite showed the best impregnation levels. In their surfaces, grown DFT crystals showed different structures. The obtained hybrid solids were tested using several metallic ion solutions: Mn(II), Ni(II), Co(II), Cd(II), Hg(II), Pb(II), Cu(II) and Zn(II). The metallic adducts were analyzed and the adsorption capacity is discussed. The materials showed high remotion percentages for all metal ions and low Hg(II), Pb(II) and Cd(II) final concentrations. They have good potential for use in remediation of contaminated water with highly toxic metal ions. The metallic adducts were characterized by FTIR and Raman spectroscopy, as well as SEM/EDX analysis. However, all of mentioned methods were not useful for detection of impregnated DFT nor adsorbed or coordinated metallic ions on the supporting materials. Only the SEM/EDX method was found to be suitable for analysis.

New high temperature materials and improved blade cooling techniques have led 10 design of advanced models of industrial gas turbines with inlet or “firing” temperatures of 2350 degrees F. and higher. All major vendors now offer large new commercial gas turbine-generators, with outputs of 150 megawatts and higher, based on these new designs. These new turbine units offer higher overall performance and fuel efficiencies, with promise of better reliability and availability, as well as lower operating and maintenance costs. EPRI began to assess the durability of early models of these advanced gas turbines (AGT) in 1991, by closely monitoring their performance during electric utility operation. The durability surveillance program, involving several AGT installations outlined below, will be described. However, only the first two sites involving GE units have produced a substantial operating history for discussion. The latter two sites have only recently had new AGT units installed by ABB and Siemens respectively. At the time of this writing, those new units are still being readied for utility operation. Their operating history under the durability surveillance program will be monitored, and discussed in a future paper. • General Electric Gas Turbine Model MS7001F in peaking service at Potomac Electric Power Co. Station H at Dickerson, Maryland. • General Electric Gas Turbine Model MS7001FA in baseload service at Florida Power & Light Co. Martin Plant at Indiantown, Florida. • ASEA Brown Bovert Gas Turbine Model GT 24 initially in peaking service at Jersey Central Power & Light Co.(now GPU GenCo) Gilbert Station at Milford, New Jersey. • Siemens Gas Turbine Model V84.3A in peaking service at Kansas City Power & Light Co. Hawthorn Station at Kansas City, Missouri. The purpose is to determine the prospects for improved unit life cycle costs as a result of higher levels of performance, availability, reliability, and mantainability achieved by adding these engines to the industry fleet. This paper will describe the initial results from the Durability Surveillance studies, including observations from unit maintenance inspections as well as the output of advanced diagnostics and monitoring systems.