Conecte-se

Bibliografias temáticas / MTR System

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "MTR System"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 6 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "MTR System".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "MTR System"

1

Afshar, Abbas, e Ehsan Najafi. "Consequence management of chemical intrusion in water distribution networks under inexact scenarios". Journal of Hydroinformatics 16, n.º 1 (25 de julho de 2013): 178–88. http://dx.doi.org/10.2166/hydro.2013.125.

Texto completo da fonte

Resumo:

The US Environmental Protection Agency (EPA)'s Response Protocol Toolbox provides a list of recommendations on actions that may be taken to minimize the potential threats to public health following a contamination threat. This protocol comprises three steps: (1) detection of contaminant presence, (2) source identification and (3) consequence management. This paper intends to explore consequence management under source uncertainty, applying Minimize Maximum Regret (MMR) and Minimize Total Regret (MTR) approaches. An ant colony optimization algorithm is coupled with the EPANET network solver for structuring the MMR and MTR models to present a robust method for consequence management by selecting the best combination of hydrants and valves for isolation and contamination flushing out of the system. The proposed models are applied to network number 3 of EPANET to present its effectiveness and capabilities in developing effective consequence management strategies.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

BHATT, RAJAN, e S. S. KUKAL. "TILLAGE AND ESTABLISHMENT METHOD IMPACTS ON LAND AND IRRIGATION WATER PRODUCTIVITY OF WHEAT–RICE SYSTEM IN NORTH-WEST INDIA". Experimental Agriculture 53, n.º 2 (13 de abril de 2016): 178–201. http://dx.doi.org/10.1017/s0014479716000272.

Texto completo da fonte

Resumo:

SUMMARYThe resource conservation technologies (RCTs), being advocated for countering the threat to the sustainability of wheat–rice cropping system (RWCS) in the north–west (NW) Indo-Gangetic Plains (IGP) of India, have been evaluated mostly for the individual crops, without depicting the impact of these technologies on the succeeding or preceding crop. A study was thus conducted during 2012–2014 in NW India to assess the land and irrigation water productivity (WPI) of RWCS under different establishment and conservation tillage techniques in a sandy-loam soil (coarse loamy, calcareous, mixed, hyperthermic Typic Ustochrept). The treatments included zero (ZTW) and conventional (CTW) tillage in wheat as main plot, establishment methods (direct seeded (DSR) and mechanically transplanted rice (MTR)) as sub-plot and tillage in rice viz. puddle (PR), dry (CTR) and zero (ZTR) tillage as sub–sub plot treatments, replicated thrice in split–split plot design. The land productivity of RWCS was significantly lower in ZTW plots than in CTW plots. The residual effect of tillage in wheat on rice productivity was distinct during the second year of study, when the CTW plots recorded significantly higher (17.5%) rice yield than the ZTW plots. The productivity of the cropping system with DSR was statistically similar to that with MTR. The WPI of RWCS increased in the order ZTW–DSR–ZTR25 < CTW–DSR–ZTR < ZTW–MTR–CTR < ZTW–DSR–PR < CTW–DSR–PR < ZTW–MTR–PR26 < CTW–MTR–PR.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Mistry, Niraj, Rasha Abdel-Fahim, Olivier Mougin, Christopher Tench, Penny Gowland e Nikos Evangelou. "Cortical lesion load correlates with diffuse injury of multiple sclerosis normal appearing white matter". Multiple Sclerosis Journal 20, n.º 2 (15 de julho de 2013): 227–33. http://dx.doi.org/10.1177/1352458513496344.

Texto completo da fonte

Resumo:

Background:Degeneration of central nervous system normal appearing white matter (NAWM) underlies disability and progression in multiple sclerosis (MS). Axon loss typifies NAWM degeneration.Objective:The objective of this paper is to assess correlation between cortical lesion load and magnetisation transfer ratio (MTR) of the NAWM in MS. This was in order to test the hypothesis that cortical lesions cause NAWM degeneration.Methods:Nineteen patients with MS underwent 7 Tesla magnetisation-prepared-rapid-acquisition-gradient-echo (MPRAGE), and magnetisation transfer ratio (MTR) brain magnetic resonance imaging (MRI). Cortical lesions were identified using MPRAGE and MTR images of cortical ribbons. White matter lesions (WMLs) were segmented using MPRAGE images. WML maps were subtracted from white matter volumes to produce NAWM masks. Pearson correlation was calculated for NAWM MTR vs cortical lesion load, and WML volumes.Results:Cortical lesion volumes and counts all had significant correlation with NAWM mean MTR. The strongest correlation was with cortical lesion volumes obtained using MTR images ( r = −0.6874, p = 0.0006). WML volume had no significant correlation with NAWM mean MTR ( r = −0.08706, p = 0.3615).Conclusion:Our findings are consistent with the hypothesis that cortical lesions cause NAWM degeneration. This implicates cortical lesions in the pathogenesis of NAWM axon loss, which underpins long-term disability and progression in MS.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Hung, Edmund Y. M., e Chu Yee Ming. "Main Control System at MTR – Its Evolution and Development". HKIE Transactions 13, n.º 1 (janeiro de 2006): 13–15. http://dx.doi.org/10.1080/1023697x.2006.10668025.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Koo, Kenneth, e W. Dorsey Stuart. "Sequence and structure of mtr, an amino acid transport gene of Neurospora crassa". Genome 34, n.º 4 (1 de agosto de 1991): 644–51. http://dx.doi.org/10.1139/g91-098.

Texto completo da fonte

Resumo:

The gene product of the mtr locus of Neurospora crassa is required for the transport of neutral aliphatic and aromatic amino acids via the N system. We have previously cloned three cosmids containing Neurospora DNA that complement the mtr-6(r) mutant allele. The cloned DNAs were tightly linked to restriction fragment length polymorphisms that flank the mtr locus. A 2.9-kbp fragment from one cosmid was subcloned and found to complement the mtr-6(r) allele. Here we report the sequence of the fragment that hybridized to a poly(A)+ mRNA transcript of about 2300 nucleotides. We have identified an 845-bp open reading frame (ORF) having a 59-bp intron as the potential mtr ORF. S1 nuclease analysis of the transcript confirmed the transcript size and the presence of the intron. A second open reading frame was found upstream in the same reading frame as the mtr ORF and appears to be present in the mRNA transcript. The mtr ORF is predicted to encode a 261 amino acid polypeptide with a molecular mass of 28 613 Da. The proposed polypeptide exhibits six potential α-helical transmembrane domains with an average length of 23 amino acids, does not have a signal sequence, and contains amino acid sequence homologous to an RNA binding motif.Key words: sequence, membranes, ribonucleoprotein.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Koçak, Mustafa M., Neslihan Y. Çirakoğlu, Sibel Koçak, Baran C. Sağlam, Ersan Çiçek, Sevinç A. Türker e Emre Bodrumlu. "Effect of Retreatment Instruments on Microcrack Formation: A Microcomputed Tomography Study". International Journal of Artificial Organs 40, n.º 3 (março de 2017): 123–27. http://dx.doi.org/10.5301/ijao.5000578.

Texto completo da fonte

Resumo:

Introduction The purpose of this study was to compare the occurrence of microcracks in teeth prepared with different retreatment systems using microcomputed tomography (micro-CT). Methods Forty-two freshly extracted mandibular premolar teeth were used. The root canals were instrumented with stainless steel K-files to an apical size of 35/.02 using the balanced-force technique and were obturated using the passive compaction technique. The specimens were divided into 3 experimental groups according to retreatment system used (n = 14): ProTaper Universal retreatment (PTUR), Mtwo retreatment (MTR), or D-RaCe retreatment (D-RC) systems. Each specimen was scanned using a high-resolution micro-CT system before instrumentation, after obturation, and after the removal of the filling material. The images were evaluated, and the presence of microcracks was recorded. Results The PTUR system demonstrated the highest percentage, while MTR and D-RC retreatment systems resulted in similar numbers of microcracks. Conclusions Clinicians should be aware that all retreatment systems may cause microcracks.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Charil, A., D. Caputo, R. Cavarretta, M. P. Sormani, P. Ferrante e M. Filippi. "Cervical cord magnetization transfer ratio and clinical changes over 18 months in patients with relapsing-remitting multiple sclerosis: a preliminary study". Multiple Sclerosis Journal 12, n.º 5 (setembro de 2006): 662–65. http://dx.doi.org/10.1177/1352458506070714.

Texto completo da fonte

Resumo:

Background Magnetization transfer ratio (MTR) permits the quantitative estimation of cervical cord tissue damage in patients with multiple sclerosis (MS). Objective To determine whether a single time-point MTR scan of the cervical cord is associated with short-term disease evolution in patients with relapsing-remitting (RR) MS. Methods Using a 1.5-T magnetic resonance imaging (MRI) system with a tailored cervical cord phased array coil, fast short-tau inversion recovery (fast-STIR) and MTR scans were obtained from 14 untreated patients with RRMS at baseline. Cervical cord MTR histograms were derived. Over the 18- month follow-up period, relapse rate was measured and disability assessed by the Expanded Disability Status Scale (EDSS) score. Results Average cervical cord MTR was correlated with relapse rate ( r= -0.56, P = 0.037). A moderate correlation ( r values ranging from -0.33 to -0.36) between baseline cervical cord MTR metrics and EDSS changes over 18 months was also noted, albeit statistical significance was not reached ( P = 0.26 and 0.21, respectively) perhaps because of the relatively small sample size. Conclusions This study suggests that a ‘snapshot’ MT MRI assessment of the cervical cord may detect cervical cord tissue changes associated with short-term disease evolution in RRMS.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Uda, Takaaki. "Fundamental issues in Japan’s management system of coast for preventing beach erosion". Maritime Technology and Research 4, n.º 1 (3 de agosto de 2021): Manuscript. http://dx.doi.org/10.33175/mtr.2022.251788.

Texto completo da fonte

Resumo:

When an offshore or port breakwater is constructed on a coast, beach erosion often occurs on nearby beaches of the breakwater due to the wave diffraction effect of the breakwater associated with the formation of a wave-shelter zone, because longshore sand transport is triggered from outside to inside the wave-shelter zone. Similarly, when unidirectional longshore sand transport is blocked by a breakwater, beach erosion will occur downcoast. In these cases, longshore sand movement is the key factor. Another aspect is arisen from the management system of the land near a coast subject to such longshore sand movement. In Japan, the management of coastal land is under the jurisdiction of several agencies. When sand is transported alongshore across 2 management areas, the sand right belongs to the agency administrating the area to which the sand is deposited, and the agency administrating the area from which the sand originated has no right. Thus, this leads to uncoordinated solution to erosion problems, because longshore sand can freely move across the boundaries of coastal management areas. In this study, these issues were studied through real examples. Even though the accuracy of the predictive model of beach changes is increased, implementing fundamental changes of the coastal condition is difficult when this issue is unsolved as it is.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Mariappan, Muralindran, Manimehala Nadarajan, Rosalyn R. Porle, Brendan Khoo, Wong Wei Kitt e Vigneswaran Ramu. "An Application on Medical Tele-Diagnosis Robot (MTR) for Real-Time Motion Detection". Applied Mechanics and Materials 664 (outubro de 2014): 355–59. http://dx.doi.org/10.4028/www.scientific.net/amm.664.355.

Texto completo da fonte

Resumo:

The use of medical robots in healthcare industry especially in rural areas are hitting limelight these days. Development of Medical Tele-diagnosis Robot (MTR) has gain importance to unravel the need of medical emergencies. Nevertheless, challenges for a better visual communication still arises. Thus, a face identification and tracking system for MTR is designed to allow an automated visual which will ease the medical specialist to identify and keep the patient in the best view for visual communication. This paper emphasis on the motion detection module which is the first module of the system. An improved motion detection technique is proposed which suits a real-time application for a dynamic background. Frame differencing method was used to detect the motion of the target. The developed motion detection module succeeded an accuracy of 96% resulting an average of 97% of the whole MTR.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Nguyen, D. A., e Long Le Ngoc Bao. "Applying A* Algorithm in routing for Inter-Terminal Transport System at Busan Port". Maritime Technology and Research 2, n.º 4 (11 de maio de 2020): Manuscript. http://dx.doi.org/10.33175/mtr.2020.240342.

Texto completo da fonte

Resumo:

This paper proposes a heuristic approach named A* algorithm to find shortest route for Inter-Terminal Transport Monorail System (ITT system) that are being applied in Busan Port (Korea). In every transport system, vehicle routing and task assignment are significant problems that affects strongly the overall system’s efficiency, especially the travel cost and the time taking. The proposed ITT system will use shuttles to carry containers along a monorail that links the internal terminals. A* algorithm is used to guide the shuttles in a shortest way automatically from a known loading position to a designated unloading one. In the first part of the paper, we will describe briefly about the ITT system that being considered in Korea. Next, we will explain why and how we implement A* algorithm in dispatching. Finally, we will give some comparisons between performances of new ITT system and traditional transport system through simulation in MATLAB.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "MTR System"

1

Tam, Yuen-chi, e 譚遠志. "The effectiveness of the safety management system on the MTR". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2000. http://hub.hku.hk/bib/B4257514X.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Tam, Yuen-chi. "The effectiveness of the safety management system on the MTR". Click to view the E-thesis via HKUTO, 2000. http://sunzi.lib.hku.hk/hkuto/record/B4257514X.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Raun, Michael. "Sensor based system for train detection : Master thesis for MTR in Mechatronics". Thesis, KTH, Maskinkonstruktion (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-168704.

Texto completo da fonte

Resumo:

Tunnelbanan i Stockholm består av tre linjer, som omfattar 100 stationer med 108 km spår. Resenärer gör 1,1 miljoner resor varje dag. Beroende av tid på dygnet kan antalet tågvagnar variera, vilket kan leda till att föraren av misstag stoppar tåget med en vagn kvar i tunneln eller utanför plattformen. För att förhindra detta behövs ett sensorbaserat fristående system som indikerar till föraren att hela tåget är vid plattformen. Först beskriver denna avhandling de befintliga tekniker och metoder som används för tågdetektering idag. Två typer av teknik jämförs för denna applikation, optiska och induktiva. Det optiska systemet är dyrare och är känslig för en stökig och smutsig miljö, men är enkelt applicerbart på denna applikation. Den induktiva sensorn är billig och kräver inget underhåll. Utmaningen är det korta avkänningsavståndet på 50 mm. De båda typerna av sensorerna testas i ett system, i laboratoriemiljö och vid Hjulsta tågstationen. Olika typer av konfigurationer testas och utvärderas. De två konfigurationer som jämförs i slutet, är ett lasersensor system som indikerar för föraren när laserstrålen är blockerad. Den andra konfigurationen använder två induktiva sensorer som räknar tågets axlar på två olika platser längs spåret. Ett schema för det slutliga kretskortet och kod för logiken presenteras avslutningsvis.
The metro system in Stockholm consists of three lines, covering 100 stations with 108 km of track. Boarding passengers take 1.1 million journeys every day. Depending on the time of day, the number of cars varies, which can cause drivers to inadvertently stop trains with one car still in the tunnel or off the platform. To prevent this, there is a need for a sensor-based stand-alone system to alert drivers that the whole train, including all cars, is at the platform. First, the thesis describes the existing technologies and methods for train positioning. Two types of technology are compared for this application, optical and inductive. The optical system is more expensive and more sensitive to a messy environment but is more straightforward. The inductive sensor is cheap and does not need any maintenance. The challenge is the 50 mm sensing range. Both types of sensors were tested in a system, in laboratory environment and at Hjulsta trainstation. Different approaches were tested and evaluated. The two configurations that are compared in the end are a laser sensor system that indicates to the driver when the laser beam is blocked. The second configuration uses two inductive sensors that count the axles in two different locations along the track. Schematics for the final PCB and code for the logic are also presented.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Gjordeni, Kejsi, e Ayca Kaya. "Digitizing the Maintenance Management Operation : Exploring the Opportunities of an Information System in a Railway Maintenance Organization". Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264090.

Texto completo da fonte

Resumo:

The phenomenon of digitization is transforming industries worldwide by introducing new valueproducing opportunities. In the railway industry, market liberalization has resulted in increased competition. To remain profitable in this new market environment, rail operators need to transform and acquire new digital capabilities and tools. By digitizing information-intensive processes with an information system, railway companies can reduce loss of operation time and reduce total maintenance costs. At the same time, the limited research exploring information systems in maintenance management has made it challenging for companies wanting to digitize. Significant attention has been devoted to the separate topics, however research overlapping the two areas of study has been inadequate. The thesis aims to contribute with knowledge to bridge this gap in literature by investigating the opportunities a maintenance organization potentially can capture with an information system and the success factors needed to succeed. By conducting the thesis in collaboration with the Swedish railway maintenance company MTR Tech AB the potential uses of an information system have been identified and assessed. Findings indicate that there are three main business opportunities to obtain from an information system: support of the troubleshooting process, better planning of reactive maintenance and enabling the performance of condition-based maintenance. At the same time, the profitability of an information system was found to be directly linked to its degree of utilization. Our findings have therefore allowed us to conclude that the business opportunity to pursue is the one that is most likely to be carried out fully and successfully in the prevailing circumstances. Lastly, the findings conclude that the success factors needed to capture the desired business opportunities are a dedicated project group, clear communication and information sharing, as well as adequate personnel.
Digitalisering har påverkat och transformerat företag över hela världen genom att erbjuda nya värdeproducerande möjligheter. För att bibehålla konkurrenskraft i en föränderlig omvärld måste järnvägsoperatörer transformera sina företag och förvärva nya digitala lösningar och verktyg kopplade till järnvägsteknologier. Genom att digitalisera informationsintensiva processer med hjälp av informationssystem, blir det möjligt för järnvägsföretag att minska förlust av drifttid samt minska den totala underhållskostnaden. Samtidigt har den begränsade forskningen gällande användning av informationssystem i underhållsorganisationer försvårat digitaliseringsförsöken. Litteratur och tidigare studier har behandlat de två ämnena separat, dock har överlappande forskning varit otillräcklig. Denna studie syftar till att bidra med kunskap för att överbrygga gapet i litteraturen genom att undersöka de vinningar en underhållsorganisation kan erhålla med hjälp av ett informationssystem och de framgångsfaktorer som krävs för att uppnå dem. Genom att utföra denna studie i samarbete med det svenska underhållsbolaget MTR Tech AB har de potentiella användningsområdena av ett informationssystem identifierats. De tre huvudsakliga affärsmöjligheterna som kan erhållas från ett informationssystem är: stödjande av felsökningsprocessen, bättre planering av avhjälpande underhåll, samt möjliggörandet av tillståndsbaserat underhåll. Samtidigt har det visat sig att lönsamheten av ett informationssystem är direkt kopplat till dess utnyttjandegrad. Vi har således dragit slutsatsen att den affärsmöjlighet som bör eftersträvas är den som med största sannolikhet kommer att genomföras framgångsrikt under rådande omständigheter. Slutligen visar våra resultat att de framgångsfaktorer som krävs för att uppnå affärsmöjligheterna är en dedikerad projektgrupp, tydlig kommunikation och informationsdelning, samt lämplig personal.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Pan, Wubin. "Regulation of the susceptibility of Neisseria gonorrhoeae to antibiotics and hydrophobic compounds by the mtr system". Thesis, University of Sussex, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.238975.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Yan, Fan. "Theoretically total bandwidth conserving locality in Distributed Storage System". Thesis, KTH, Kommunikationsteori, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-160952.

Texto completo da fonte

Resumo:

Distributed storage systems provide fast and reliable access to data by intro- ducing redundancy for stored les. The most common approach of adding re- dundant information is by repetition and erasure codes. Two main processes in a distributed storage system are reconstruction of original le and regenerat- ing a new node. These two processes require bandwidth, which are termed as reconstruction-bandwidth and repair-bandwidth. The current literature treat- s these two processes separately. That is, there are methods to reduce the reconstructing bandwidth without considering the repair-bandwidth, and also there are methods to reduce the repair-bandwidth. We study these two pro- cesses together and try to jointly minimize the reconstruction-bandwidth and repair-bandwidth. We observe a method that has the minimum reconstruction- bandwidth might have large amount of repair-bandwidth and vice versa. We propose codes which minimizes the sum of the repair-bandwidth and reconstruction- bandwidth. The main contribution of this thesis is nding an value of repair locality r (number of nodes connected during node repair) and devising two coding meth- ods in which total bandwidth approximates to be half reduced compared with MSR and MBR when k ! 1 under the condition that 1 6 r 6 k.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Hayes, Shaun P. "Systems architecture for a tactical Naval Command and Control System". Thesis, Monterey, Calif. : Naval Postgraduate School, 2009. http://edocs.nps.edu/npspubs/scholarly/theses/2009/Mar/09Mar%5FHayes.pdf.

Texto completo da fonte

Resumo:

Thesis (M.S. in Systems Engineering)--Naval Postgraduate School, March 2009.
Thesis Advisor(s): Paulo, Eugene ; Boensel, Matthew. "March 2009." Description based on title screen as viewed on April 23, 2009. Author(s) subject terms: Command and Control, C2, C3, Systems Engineering, Systems Architecture, Network-Centric Warfare, NCW, Network-Centric Operations, NCO, Doctrine, DOTMLPF Includes bibliographical references (p. 259-262). Also available in print.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Podolský, Ondřej. "Sběr MaR dat". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316397.

Texto completo da fonte

Resumo:

The semester thesis outlines the idea of the concept of intelligent building and related technologies. The first section describes the devices used in the field of intelligent installations in particular selected communication protocols and bus. In the next section there are some examples of systems from different manufacturer and the most detailed herein descripted system is Honeywell’s system built on NiagaraAX Framework because the practical part of the work is implemented using this system. The last part describes creation process of data visualization and storage obtained from intelligent building of Faculty of Electrical Engineering and Communication.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Inturi, Satya Prakash Reddy, e Chaitanya Macherla. "System Performance of MIMO MRT/MRC System under Perfect CSI". Thesis, Blekinge Tekniska Högskola, Institutionen för datavetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-21137.

Texto completo da fonte

Resumo:

Multiple Input and Multiple Output (MIMO) is one of the techniques used tiimprove the system performance. In this thesis, we improve and evaluate the system performance of MIMO deploying MRT technique at the transmitter and MRCtechnique at the receiver with an assuming that the system can obtain perfect CSI.We derived expressions for outage probability and symbol error rate and simulationgraphs for SISO, SIMO, MISO, and MIMO in terms of outage probability. Our results show that the MIMO system performance is better than other configurations.We also observed that SISO have the least performance where SIMO and MISOhave same performance. The performance also increases as the number of antennasincrease in the system and it is suggested to use MIMO when performance is givehigh priority than cost.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Mandl, Peter. "Das MTA-Protokoll: Ein transaktionsorientiertes Managementprotokoll auf Basis von SNMP". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-103103.

Texto completo da fonte

Resumo:

Die sich in den letzten Jahren abzeichnende Verteilung von Anwendungssystemen auf viele Rechner in Netzwerken, die sich in der Praxis unter dem Begriff Client/Server-Computing etabliert hat, brachte zwangsläufig eine Lücke im Management dieser Systeme mit sich. Es wurde schnell deutlich, daß die Verteilung der Systeme wesentlich kompliziertere Techniken benötigt, um sie zu administrieren, als man dies von zentralistischen Systemen her kannte. Anstrengungen von Standardisierungsgremien und Herstellervereinigungen führten zwar zu einer gewissen Administrierbarkeit, diese beschränkt sich aber derzeit noch weitgehend auf die beteiligten Knoten und auf die Netzkomponenten. Anwendungen, für die ja letztendlich die Rechner eingesetzt werden, sind bisher nur rudimentär in die heute vorliegenden und in der Praxis eingesetzten Managementstandards integriert. Die Anzahl der zu managenden Objekte innerhalb der Anwendungen wird aber immer größer und die Komplexität der Beziehungen unter den Objekten steigt immer mehr an. Diese Komplexität erfordert fehlertolerante Mechanismen in den Managementsystemen, über die Anwendungen administriert werden. Dieser Beitrag befaßt sich mit Mechanismen zum transaktionsgesicherten Management, wobei das Anwendungsmanagement im Vordergrund steht. Transaktionskonzepte, die vorwiegend im Datenbankbereich entwickelt wurden, werden auf die Verwendbarkeit im Management verteilter Anwendungen hin untersucht. Es wird ein neues Protokoll (Management-Transaktions-Protokoll, kurz MTAProtokoll) als Erweiterung zu SNMP vorgestellt, das die Abwicklung von verteilten Transaktionen auf Managementobjekte ermöglicht.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "MTR System"

1

Nemec, David. The systems of M.R. Shurnas. London: Calder, 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Nemec, David. The systems of M.R. Shurnas: A novel. New York: Riverrun Press, 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

THRUST Workshop (1988 Viña del Mar, Chile). Proceedings of the THRUST Workshop, Viña del Mar, June 1988. [Viña del Mar, Chile]: Instituto Hidrográfico de la Armada de Chile, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Mir zhivogo: Sistemnostʹ, ėvoli͡u︡t͡s︡ii͡a︡ i upravlenie. Moskva: Izd-vo polit. lit-ry, 1986.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Ismagilov, R. U. T︠S︡elostnyĭ mir cheloveka i ego ėvoli︠u︡t︠s︡ii︠a︡, teorii︠a︡ i praktika. Ufa: Izdanie Bashkirskogo universiteta, 1998.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

DeLombard, Richard. SAMS acceleration measurements on Mir from May 1997 to June 1998 (NASA increments 5, 6, and 7). [Washington, D.C: National Aeronautics and Space Administration, 1999.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

NASA Advisory Council. Task Force on the Shuttle-Mir Rendezvous & Docking Missions. Fourth report of the Task Force on the Shuttle-Mir Rendezvous & Docking Missions. [Washington, D.C: National Aeronautics and Space Administration, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Murray, Peggy M. Sediment core chemistry data summary from the MQR Mound, August and December 1991. Waltham, MA: U.S. Army Corps of Engineers, New England Division, 1996.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

NASA Advisory Council. Task Force on the Shuttle-Mir Rendezvous & Docking Missions. Third report of the Task Force on the Shuttle-Mir Rendezvous & Docking Missions. [Washington, D.C: National Aeronautics and Space Administration, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

NASA Advisory Council. Task Force on the Shuttle-Mir Rendezvous & Docking Missions. Third report of the Task Force on the Shuttle-Mir Rendezvous & Docking Missions. [Washington, D.C: National Aeronautics and Space Administration, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "MTR System"

1

Nakoriya, Ankit, e Vijay Kumar Gupta. "Hybrid Steering System of Six-Wheel Multiterrain Robot (SW-MTR)". In Lecture Notes in Mechanical Engineering, 871–86. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0550-5_80.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Armbrust, G., H. Geiser e D. Rittscher. "20 Foot Container System for Shipment of Spent MTR-Fuel Assemblies". In Transportation for the Nuclear Industry, 137–41. New York, NY: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4757-0046-6_13.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Mizuoka, Fujio. "The Colonialism Behind the Making of the Urban Rapid Railway System (MTR)". In Contrived Laissez-Faireism, 163–210. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-69793-2_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Kahl-Scholz, Martina, Ingrid Offenhäusser, Christel Vockelmann e Julia Thiele. "Muskuloskelettales System". In Fachwissen MTRA, 409–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43713-1_13.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Kahl-Scholz, Martina, Ingrid Offenhäusser, Christel Vockelmann e Ursula Blum. "Muskuloskelettales System". In Fachwissen MTRA, 451–70. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57632-8_14.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Offenhäusser, Ingrid, Christel Vockelmann, Dagmar Dohr, Claudia Marks e Ursula Blum. "Respiratorisches System". In Fachwissen MTRA, 519–30. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57632-8_18.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Blum, Ursula, Dagmar Dohr, Martina Kahl-Scholz e Christel Vockelmann. "Gastrointestinales System". In Fachwissen MTRA, 531–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57632-8_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Dohr, Dagmar, Ingrid Offenhäuser, Claudia Marks e Christel Vockelmann. "Endokrinologisches System". In Fachwissen MTRA, 591–605. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-57632-8_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Thiele, Julia, Ingrid Offenhäusser e Christel Vockelmann. "Diagnostik und Therapie – Respiratorisches System". In Fachwissen MTRA, 471–82. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43713-1_17.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Blum, Ursula, Dagmar Dohr, Martina Kahl-Scholz e Christel Vockelmann. "Diagnostik und Therapie – Gastrointestinales System". In Fachwissen MTRA, 483–506. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43713-1_18.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "MTR System"

1

Leung, D., e Q. Leung. "Asset management system led transformation in MTR". In IET and IAM Asset Management Conference 2011. IET, 2011. http://dx.doi.org/10.1049/cp.2011.0543.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Snider, L., E. Lo e T. Lai. "Harmonic simulation of MTR traction system by EMTP". In Proceedings of the IEEE 1999 International Conference on Power Electronics and Drive Systems. PEDS'99 (Cat. No.99TH8475). IEEE, 1999. http://dx.doi.org/10.1109/peds.1999.794561.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Wong, T. "Strategic Achievements of Asset Management System in MTR". In 3rd Annual Forum on Asset Management. Institution of Engineering and Technology, 2013. http://dx.doi.org/10.1049/ic.2013.0171.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Bouloubasis, Antonios K., e Gerard T. McKee. "The Mobility System of the Multi-Tasking Rover (MTR)". In 2007 IEEE International Conference on Robotics and Automation. IEEE, 2007. http://dx.doi.org/10.1109/robot.2007.364237.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Zhou, Ying, e Lie-Yun Ding. "Automation Negotiation System Based on Web in MTR Construction". In 2009 International Conference on E-Business and Information System Security (EBISS). IEEE, 2009. http://dx.doi.org/10.1109/ebiss.2009.5137944.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Hu, Shou-Ren, e Chao-Tang Liu. "Establish a Time-Dependent Mass Rapid Transit Timetable: A Case Study for the Kaohsiung Mass Rapid Transit System". In 2012 Joint Rail Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/jrc2012-74101.

Texto completo da fonte

Resumo:

The operation of a mass rapid transit (MRT) should consider the balance between total system costs and service level. For a MRT system, the main service is to provide passengers with the cost-affordable mobility, under the regulation of MRT service indicators; the government sets the minimum standards to ensure a certain level of MTR services. Thereby, how to establish an optimal operating timetable is one of the important operational issues for a MRT system. In the past research concerning MRT operations, most researches focused on the issues of train delay, energy saving, route design or overall system operating regards, and placed less focus on the optimal timetable problem. In the Kaohsiung Mass Rapid Transit (KMRT) system, the total ridership has not reached a predicted level, but the service provided in terms of the Train Service Plan (TSP) is more than needed. Therefore, a time-dependent time table for the KMRT system is crucial to minimize total system cost while maintaining the certain level of train service. In this research, we aim to develop a time-dependent timetable model which is able to dynamically adjust train schedule depending on the passenger spatio-temporal distribution demands during daily operation. The developed model will be solved by minimizing both the operating cost and passenger waiting cost. Finally, numerical case study and sensitivity analysis will be conducted to demonstrate the feasibility and effectiveness of the developed models and solution algorithms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Xie, Yongchao, e Li Yang. "Application of AC Dynamometer in MTR Traction Motor Comprehensive Intelligent Test System". In ICITEE2020: The 3rd International Conference on Information Technologies and Electrical Engineering. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3452940.3453050.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Xie, Yongchao. "Control Strategy of AC Electrical Dynamometer Module in MTR Traction Motor Comprehensive Intelligent Test System". In ICITEE2020: The 3rd International Conference on Information Technologies and Electrical Engineering. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3452940.3452966.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Gençoğlu, Caner, Aslı Arife Gürel e Ege Can Koç. "Utilization of Modal Test Techniques for Quality Control of Mass Manufactured Parts". In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65908.

Texto completo da fonte

Resumo:

Bringing a high tech product to the market as soon as possible has never been so critical. Quality control of critical parts manufactured in large quantities is a problem to solve in many industries ranging from aerospace to automotive. If there are precision parts with very tight dimensional tolerances in the assembly, each and every dimension of every part must be measured. Otherwise parts with dimensions out of tolerances will create more trouble in the later steps of the assembly. Measuring the dimensions of precision parts using high precision coordinate measurement machines (CMM) is time consuming and can be quite cumbersome. Also the initial investment to be made in order to acquire a precise CMM is quite expensive. An alternative solution to this quality assurance (QA) problem is utilizing the vibrational characteristics of the manufactured part. A quality acceptance criterion using those characteristics of the part can be developed. Natural frequencies and mode shapes of the part are the key parameters to be measured when deciding the part to fail or pass. For this purpose, a test setup with the ability of automated modal testing is required. In this study, such a system is designed and developed named as the modal test robot (MTR). The MTR consists of an automated modal test hammer to excite the modes of test part, a mechanism to support the hitting hammer and a heavy granite table to secure the part. By using finite element (FE) analysis, the natural frequency range for the acceptable test part is determined. High fidelity FE analysis models are utilized to ensure good agreement between analysis and test results. Three different parts called the spool; the four arm star and the blade are examined as case studies. In case studies, relationship between part dimension and the natural frequency of the part is calculated by utilizing parametric FE model for each part. Using this relationship, fail or pass criterion is developed according to a specific natural frequency of the part. Natural frequencies of the part are measured on the MTR. Since modal test is carried out by using the MTR, repeatability and coherence of the test results are increased. By this procedure, a technician can make a quick decision whether the measured part passes of fails by just checking the natural frequency. Utilizing the vibrational characteristics as a fail or pass criterion for parts instead of a dimensional measurements is a fast and cheap method that can be employed in QA processes. By implementing this methodology, QA cycle times for manufactured parts reduces 90% and higher number of parts can be controlled in a limited inspection time.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Tabatabaie, Mansour, e Basilio Sumodobila. "Component Mode Synthesis Based SSI Analysis of Complex Structural Systems Using SASSI". In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77274.

Texto completo da fonte

Resumo:

Three-dimensional seismic soil-structure interaction (SSI) analysis of nuclear power plants (NPP) is often performed in frequency domain using the computer program SASSI [1]. This enables the analyst to properly a) address the effects of wave radiation in an unbounded soil media, b) incorporate strain-compatible soil shear modulus and damping properties and c) specify input motion in the free field using de-convolution method and/or spatially variable ground motions. For large, complex structural systems with multi-million degrees of freedom (DOF) and large foundation impedance matrices associated with deeply embedded foundations, the conventional sub-structuring analysis approach employed in SASSI often results in a coefficient matrix that is too large to solve with currently available computer resources. To address this problem, the method of component mode synthesis (CMS) is employed in the SSI analysis. This involves partitioning the structure into several interconnected components, calculating the reduced-order model of each component, and then assembling the reduced-order component models into a global model of the total SSI system. This technique has been implemented in MTR/SASSI® [2] utilizing the super-element capability. After the component boundary and foundation motions of the synthesized SSI model are determined, these motions are substituted back into the structural component model to compute the response of the structure. This paper presents the formulation of component mode models, and their implementation into the global SSI model. To check out this procedure, an example of seismic SSI analysis of a simplified NPP model on flexible basemat subject to horizontal and vertical excitations is considered. The total SSI system is first analyzed with SASSI using the conventional approach to compute the baseline (target) solution. The structure is then partitioned from the basemat and analyzed separately using the ANSYS® [3] program to compute the component mode properties that are used to form the boundary super-elements. These super-elements are input into the foundation/soil model and analyzed by MTR/SASSI® to calculate the basemat response. The response of the flexible basemat is checked against the baseline solution. In the final step, the foundation basemat response that includes the SSI effects is imposed onto the structural component to calculate the response of the structure. Comparison of the responses show excellent agreement between the baseline solution and those obtained using CMS method.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "MTR System"

1

K. Winterholler. HWMA/RCRA Closure Plan for the TRA/MTR Warm Waste System Voluntary Consent Order SITE-TANK-005 Tank System TRA-007. Office of Scientific and Technical Information (OSTI), janeiro de 2007. http://dx.doi.org/10.2172/909877.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Winterholler, K. TRA Closure Plan REV 0-9-20-06 HWMA/RCRA Closure Plan for the TRA/MTR Warm Waste System Voluntary Consent Order SITE-TANK-005 Tank System TRA-007. Office of Scientific and Technical Information (OSTI), janeiro de 2007. http://dx.doi.org/10.2172/923811.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Winterholler, K. TRA Closure Plan REV 0-9-20-06 HWMA/RCRA Closure Plan for the TRA/MTR Warm Waste System Voluntary Consent Order SITE-TANK-005 Tank System TRA-007. Office of Scientific and Technical Information (OSTI), janeiro de 2007. http://dx.doi.org/10.2172/923812.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Murphy, J. L., G. C. Gilbreath, W. S. Rabinovich, M. M. Sepantaie e P. G. Goetz. FM-MRR Analog Audio System. Fort Belvoir, VA: Defense Technical Information Center, janeiro de 2005. http://dx.doi.org/10.21236/ada470520.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Kallman, Jeffrey S. Method to Compute CT System MTF. Office of Scientific and Technical Information (OSTI), maio de 2016. http://dx.doi.org/10.2172/1256443.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

J.A. Ziegler. Classification of the MGR Administration System. Office of Scientific and Technical Information (OSTI), agosto de 1999. http://dx.doi.org/10.2172/859057.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

R.J. Garrett. CLASSIFICATION OF MGR GROUND CONTROL SYSTEM. Office of Scientific and Technical Information (OSTI), agosto de 1999. http://dx.doi.org/10.2172/860603.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Graham, K. B. Modulated Tool-Path (MTP) Chip Breaking System. Office of Scientific and Technical Information (OSTI), abril de 2010. http://dx.doi.org/10.2172/985502.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

S.E. Salzman. Classification of the MGR Assembly Transfer System. Office of Scientific and Technical Information (OSTI), agosto de 1999. http://dx.doi.org/10.2172/859056.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

R. Garrett. CLASSIFICATION OF THE MGR SUBSURFACE EXCAVATION SYSTEM. Office of Scientific and Technical Information (OSTI), agosto de 1999. http://dx.doi.org/10.2172/860252.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!