Bibliografias temáticas / Molecular weight

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Molecular weight"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 26 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Molecular weight".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Molecular weight"

1

Omer, Ahmed, Tamer Tamer e Mohamed Mohyeldin. "High-Molecular Weight of Biopolymer". Vestnik Volgogradskogo gosudarstvennogo universiteta. Serija 10. Innovatcionnaia deiatel’nost’, n.º 3 (20 de outubro de 2014): 56–70. http://dx.doi.org/10.15688/jvolsu10.2014.3.7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Balko, O. B. "Low Molecular Weight Pseudomonas aeruginosa Bacteriocins". Mikrobiolohichnyi Zhurnal 81, n.º 6 (30 de novembro de 2019): 97–109. http://dx.doi.org/10.15407/microbiolj81.06.097.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Shu Xian Tiew and Misni Misran, Shu Xian Tiew and Misni Misran. "Thermal Properties of Acylated Low Molecular Weight Chitosans". Journal of the chemical society of pakistan 41, n.º 2 (2019): 207. http://dx.doi.org/10.52568/000733/jcsp/41.02.2019.

Texto completo da fonte
Resumo:
Acylated low molecular weight chitosans (LChA) were prepared from nucleophilic acylation of chitosan using acid anhydrides of short and medium chain length (4 - 10) to study the response of applied heat as a function of acyl chain length. Thermogravimetric analysis (TGA) revealed the decomposition of LChA consisted of glucosamine and acyl-glucosamine units around 141 - 151and#176;C to 400 - 410and#176;C. Both TGA and differential scanning calorimetry (DSC) analyses indicated that the introduction of acyl groups disrupted the hydrogen bonding of chitosan, the effect was more prominent as the degree of substitution and chain length of LChA increased. Grafting of acyl chains lowered the kinematic viscosity of LChA as the disruption of hydrogen bonding led to decreased hydrodynamic volume. Field emission scanning electron micrographs showed that LChA with longer chains having larger particle size due to bigger occupancy volume of acyl chains during spray drying.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Semba, Umeko, Yoko Shibuya, Hiroaki Okabe, Izumi Hayashi e Tetsuro Yamamoto. "Whale High-Molecular-Weight and Low-Molecular-Weight Kininogens". Thrombosis Research 97, n.º 6 (março de 2000): 481–90. http://dx.doi.org/10.1016/s0049-3848(99)00199-1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Lovpchae, Zarema N. "Average Plasma Molecular Weight State in Viral Maxillary Sinusitis". Journal of Advanced Research in Dynamical and Control Systems 12, SP7 (25 de julho de 2020): 127–32. http://dx.doi.org/10.5373/jardcs/v12sp7/20202090.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Paul, Pushpinder. "Molecular Weight Determination of Glutaminase Enzyme Produced from Erwinia". International Journal of Scientific Research 2, n.º 4 (1 de junho de 2012): 44–45. http://dx.doi.org/10.15373/22778179/apr2013/114.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Buckley, W. T., e K. E. Buckley. "Low-molecular-weight volatile indicators of canola seed deterioration". Seed Science and Technology 37, n.º 3 (1 de outubro de 2009): 676–90. http://dx.doi.org/10.15258/sst.2009.37.3.15.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Masubuchi, Yuichi, Yuya Doi e Takashi Uneyama. "Entanglement Molecular Weight". Nihon Reoroji Gakkaishi 48, n.º 4 (15 de setembro de 2020): 177–83. http://dx.doi.org/10.1678/rheology.48.177.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Mulloy, B., C. Gee, S. F. Wheeler, R. Wait, E. Gray e T. W. Barrowcliffe. "Molecular Weight Measurements of Low Molecular Weight Heparins by Gel Permeation Chromatography". Thrombosis and Haemostasis 77, n.º 04 (1997): 668–74. http://dx.doi.org/10.1055/s-0038-1656031.

Texto completo da fonte
Resumo:
SummaryThe molecular weight profiles of low molecular weight heparin samples have been measured by high-performance gel permeation chromatography using as calibrant the heparinase-degraded material (90/686) now established as the 1st International Reference Preparation (IRP) Low Molecular Weight Heparin for Molecular Weight Calibration. Use of the calibrant as a broad molecular weight standard is described and a calibration table provided based on data collected over several years in one laboratory.In order to confirm the assignment of degree of polymerisation to resolved oligosaccharide peaks in the calibrant, molecular weights of oligosaccharides fractionated from the 1st IRP were independently determined by fast atom bombardment mass spectrometry (FAB MS).The molecular weight distributions of commercial low molecular weight heparins have been characterized. Measurements of molecular weight parameters of heparin molecular weight standards from several sources provide comparisons between the molecular weight scales of this and other studies.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Lapierre, Catherine. "Investigations of low molecular weight and high molecular weight lignin fractions". Nordic Pulp & Paper Research Journal 14, n.º 2 (1 de maio de 1999): 158–62. http://dx.doi.org/10.3183/npprj-1999-14-02-p158-162.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Molecular weight"

1

Wright, Patricia Ann. "Understanding MS/MS fragmentation pathways of small molecular weight molecules". Thesis, University of Greenwich, 2015. http://gala.gre.ac.uk/18134/.

Texto completo da fonte
Resumo:
Fragmentation of molecules by collision-induced dissociation (CID) is not well-understood, making interpretation of MS/MS spectra difficult and limiting the effectiveness of software tools intended to aid mass spectral interpretation. An approach is required which is tailored to each individual molecule and improves the ‘chemical sense’ of the software. It was hypothesised that the bonds which break during CID of protonated molecules are the bonds which are elongated, and hence weakened, as a result of conformational changes induced by protonation. Bond length changes for a test set of molecules were calculated using quantum chemistry software. Density Functional Theory (DFT) or Austin Model 1 (AM1) or both were used to energy minimise the structures of the neutral molecules and their corresponding protonated molecules (protonated at all possible sites). Bonds which elongated to the greatest extent after protonation were compared to the bonds which were found to cleave to give the product ions in the CID spectra of these compounds. Quantum chemistry modelling was also applied to the deprotonated molecules. AM1 calculated bond lengths were found to be similar to those generated by DFT and have the advantage of being rapidly obtained. All the polarised bonds which cleaved were calculated to elongate significantly, thus achieving a 100% success rate in the prediction of bond cleavage as a result of protonation on a heteroatom. The proton is mobile across the molecule, leading to fragmentation when the proton reaches a site where it causes significant bond elongation, provided the molecule has sufficient internal energy. Cleavage of carbon-carbon bonds was not predicted. The success rate for predicting bond cleavage in deprotonated molecules was 48%, suggesting this approach cannot be applied reliably for these anions. AM1 calculated bond length change acts as a descriptor for predicting polarised bond cleavage in protonated pseudo-molecular ions having the potential to be incorporated in mass spectral interpretive software to increase the accuracy of prediction of CID spectra.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Nightingale, Philip D. "Low molecular weight halocarbons in seawater". Thesis, University of East Anglia, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280971.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Waters, Benjamin Ragan. "Molecular weight modulation in polyhydroxybutyrate fermentations". Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/38974.

Texto completo da fonte
Resumo:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, June 2007.
Includes bibliographical references.
Polyhydroxybutyrate (PHB) is a material with significant potential for commercial applications. It has material properties similar to isotactic polypropylene; it can be produced from renewable resources; it is biodegradable. Unfortunately, it is very brittle when compared to polypropylene. The physical property that most significantly affects elastic behavior is molecular weight. In an effort to understand how molecular weight is formed in PHB production, kinetic studies of PHB fermentations have been performed using fermentation conditions which allow biomass growth and PHB production phases to be separated. These data indicate that molecular weight increases very quickly and then remains fairly constant in PHB fermentations. Additional studies have indicated that only slight changes in molecular weight can be caused by changing fermentation process conditions or using mutants of the polymerization enzyme. Additionally, one mutant polymerization enzyme has been shown to excrete moderate levels of PHB monomer, 3-hydroxybutyrate, into the fermentation media. This may have application in achieving synthetic production of PHB.
by Benjamin Ragan Waters.
Ph.D.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Li, Melissa. "A microscale molecular weight analysis method for characterizing polymers solutions of unknown concentrations". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/31673.

Texto completo da fonte
Resumo:
Thesis (M. S.)--Biomedical Engineering, Georgia Institute of Technology, 2009.
Committee Chair: Hang Lu; Committee Co-Chair: Rachel Chen; Committee Member: Johnna Temenoff; Committee Member: Yonathan Thio. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Aktaş, Ece. "Low-Molecular Weight Molecules as Selective Contacts for Perovskite Solar Cells". Doctoral thesis, Universitat Rovira i Virgili, 2021. http://hdl.handle.net/10803/672777.

Texto completo da fonte
Resumo:
La tecnologia fotovoltaica és una de les fonts d'energia neta i renovable més prometedores per reduir l'impacte ambiental dels combustibles fòssils en les últimes dècades. en aquest context, les perovskites són un material que ha atret recentment una atenció important a causa de la seva capacitat per aconseguir eficiències de conversió molt elevades. Les capes de càrrega selectiva juguen un paper crucial en el ràpid augment del rendiment del dispositiu i en l'estabilitat de les cel·les solars de perovskita. Recentment, l'aplicació de mono-capes auto-assemblades formades per molècules orgàniques que funcionen com a capes selectives de càrrega en cel·les solars de perovskita ha atret una gran atenció a causa d'avantatges com la rendibilitat, l'estabilitat i l'absència d'additius. L'objectiu d'aquesta tesi és el disseny i la síntesi de noves molècules que formen mono-capes auto-assemblades que funcionin com a capes selectives de forats en cel·les solars de perovskita per aconseguir una eficiència de conversió d'alta d'energia i una vida d'envelliment d'alt rendiment feta a mida.
La tecnología fotovoltaica es una de las fuentes de energía limpia y renovable más prometedoras para reducir el impacto ambiental de los combustibles fósiles en las últimas décadas. en este contexto, las *perovskites son un material que ha atraído recientemente una atención importante a causa de su capacidad para conseguir eficiencias de conversión muy elevadas. Las capas de carga selectiva juegan un papel crucial en el rápido aumento del rendimiento del dispositivo y en la estabilidad de las celdas solares de *perovskita. Recientemente, la aplicación de *mono-capes auto-asemejadas formadas por moléculas orgánicas que funcionan como capas selectivas de carga en celdas solares de *perovskita ha atraído una gran atención a causa de ventajas como la rentabilidad, la estabilidad y la ausencia de aditivos. El objetivo de esta tesis es el diseño y la síntesis de nuevas moléculas que forman *mono-capes auto-asemejadas que funcionen como capas selectivas de agujeros en celdas solares de *perovskita para conseguir una eficiencia de conversión de alta de energía y una vida de envejecimiento de alto rendimiento hecha a medida.
Photovoltaic technology is one of the most promising clean and renewable energy sources to reduce the environmental impact of fossil fuels in recent decades. In this context, perovskites are a material that has recently attracted significant attention due to their ability to achieve very high conversion efficiencys. Selective charge layers play a crucial role in rapidly increasing device performance and in the stability of perovskite solar cells. Recently, the application of self-assembly mono-caps made up of organic molecules that function as selective layers of charge in solar perovskite cells has attracted great attention due to advantages such as profitability, stability and the absence of additives. The goal of this thesis is the design and synthesis of new molecules that form self-assembly mono-layers that function as selective layers of holes in solar perovskite cells to achieve high-energy conversion efficiency and a high-performance aging life tailored to size.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Adebekun, Aderinola Kolawole. "On-line control of molecular weight distribution". Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/12039.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Hui, Yu 1977. "Heterjunctions of small molecular weight organic semiconductors". Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81540.

Texto completo da fonte
Resumo:
Photodiodes made of small molecular weight organic semiconductors have been fabricated. The organic materials under investigation are p-type Copper phthalocyanine (CuPc) and n-type 3,4,9,10-perylenetetracarboxylic bisbenzimidazole (PTCBI). Current-voltage and capacitance-voltage measurements have been performed to evaluate the electrical properties of the organic photodiodes. Optical measurements including responsivity and temporal response have also been carried out. It has been found that device efficiency of the photodiodes is influenced by the thickness of organic layers as well as the device structures. It is believed that organic layer thickness is a strong function of materials' exciton diffusion lengths. The thickness of the organic layer employed in the fabricated photodiode is 100 A or less. However, the fabricated devices with thin organic layer showed poor performance in terms of saturation current and breakdown voltage. As a result, new device structures have been proposed to overcome the problems. Stacking structure double heterojunction (SDH) and novel comb-like structure single heterojunction (CSH) device configurations have shown a substantial improvement in both electrical and optical parameters. There is at least 3 times enhancement in photocurrent and 10 times increase in external quantum efficiency for photodiodes employing CSH device structure and 100 A organic layer. Improvements in saturation current and breakdown voltage have also been observed. In addition, responsivity measurements in CSH devices have yielded a 7 times improvement. Furthermore, the carrier lifetime of the photodiode is estimated to be around 1 microsecond from the temporal response measurements. The combined effect of thin organic layers and new device structures leads to an overall improvement in device performance.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hoogland, J. S. "Properties of low molecular weight food surfactants". Thesis, University of Bristol, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.333908.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Amer, Ismael. "Molecular weight effects on crystallization of polypropylene". Thesis, Stellenbosch : University of Stellenbosch, 2011. http://hdl.handle.net/10019.1/6649.

Texto completo da fonte
Resumo:
Thesis (PhD)--University of Stellenbosch, 2011.
ENGLISH ABSTRACT: The crystallization of polyolefins is an important parameter in determining the properties of such materials. The crystallization phenomenon generally depends on the molecular symmetry (tacticity) and molecular weight of the material. In this study, a series of polypropylenes was prepared using heterogeneous MgCl2-supported Ziegler catalysts with two different external donors, diphenyldimethoxysilane (DPDMS) and methyl-phenyldimethoxysilane (MPDMS), and two different homogeneous metallocene catalysts, racethylene- bis(indenyl) zirconium dichloride, Et(Ind)2ZrCl2 (EI), and rac-ethylene-bis(4,5,6,7- tetrahydro-1-indenyl) zirconium dichloride, Et(H4Ind)2ZrCl2 (EI(4H)). Molecular hydrogen was used as terminating agent. In order to establish a correlation between the molecular weight and the crystallization of these polymers, fractionation of the materials according to crystallizability was performed by means of temperature rising elution fractionation (TREF). This affords the opportunity of blending materials of different molecular weights but similar symmetry. These materials were characterized using various analytical techniques: differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), 13C nuclear magnetic resonance spectroscopy (13C-NMR), high temperature gel permeation chromatography (HT-GPC) and Fourier-transform infrared spectroscopy (FT-IR). DSC was used to study the bulk crystallization of different polypropylene blends, most of which showed only one melting peak. The latter is usually associated with a high degree of cocrystallization. Turbidity analysis of the different polypropylene polymers, obtained using solution crystallization analysis by laser light scattering (SCALLS), provided good crystallization information – similar to that provided by crystallization analysis fractionation (CRYSTAF) and TREF. It was also possible to differentiate between polypropylenes with similar chemical structure but different tacticity and molecular weight. SCALLS results also showed that the blends of different isotactic polypropylene polymers were miscible and cocrystallization had occurred, whereas, the blends of syndiotactic polypropylene and different isotactic polypropylenes were not miscible and some interaction between phases had occurred. Optical microcopy (OM) and scanning electronic microscopy (SEM) were used to study the morphological properties of different isotactic polypropylenes. Results revealed a welldefined and large spherulitic morphology of mixed a1 (disordered) and a2 (ordered) crystal form structures. OM and SEM images also clearly showed an effect of molecular weight and tacticity on the crystal structure of the different polypropylene samples. Finally, various homopolymers and blends were studied to investigate the effect of molecular weight on the mechanical properties of these materials. This was done using microhardness testing and dynamic mechanical analysis.
AFRIKAANSE OPSOMMING: Die kristallisasie van poliolefiene is ‘n belangrike faktor wat die eienskappe van hierdie tipe materiale bepaal. In die algemeen hang kristallisasie af van die molekulêre simmetrie (taktisiteit) en molekulêre massa van die materiaal. ‘n Reeks polipropilene is berei deur gebruik te maak van heterogene MgCl2-ondersteunde Ziegler-kataliste met twee verskillende elektron donors, difenieldimetoksisilaan (DPDMS) en metielfenieldimetoksisilaan (MPDMS), en twee verskillende homogene metalloseenkataliste, rac-etileen-bis(indeniel) sirkoniumdichloried, Et(Ind)2ZrCl2 (EI), en rac-etileen-bis(4,5,6,7-tetrahidro-1-indeniel) sirkoniumdichloried, Et(H4Ind)2ZrCl2 (EI(4H)). Molekulêre waterstof is gebruik as termineringssagent. Ten einde ‘n verband te bepaal tussen die molekulêre massa en kristallisasie van hierdie polimere is hulle gefraksioneer op die basis van hulle kristallisseerbaarheid deur gebruik te maak van temperatuurstyging-elueringsfraksionering (TREF). Deur hierdie tegniek verkry ons materiale van verskillende molekulêre massa maar met dieselfde taktisiteit wat ons kan vermeng. Verskeie tegnieke is gebruik om hierdie materiale te karakteriseer: differensiële skandeerkalorometrie (DSC), wyehoek X-straal diffraksie (WAXS), 13C-kernmagnetiese resonansspektroskopie (13C-KMR), hoë-temperatuur gelpermeasiechromotagrafie (HT-GPC) en Fourier-transform-infrarooispektroskopie (FT-IR). DSC is gebruik om die vaste-toestand kristallisasie van verskeie vermengde polipropilene te bestudeer., en net een smeltpunt is in meeste gevalle waargeneem. Laasgenoemde word gewoonlik verbind met ‘n hoë mate van kokristallisasie. Oplossingkristallisasie analise, dmv laserligverstrooiing (SCALLS), is gebruik om die turbiditeit van die verskillende polipropileen kopolimeervermengings te bepaal. Goeie inligting aangaande die kristallisasie in oplossing – soortgelyk aan dié wat dmv die kristallisasie-analise-fraksioneringstegniek (CRYSTAF) en TREF bepaal is, is verkry. Dit was ook moontlik om te onderskei tussen polipropilene met soortgelyke chemiese strukture maar verskillende taktisiteit en molekulêre massas. SCALLS data het ook getoon dat die vermengings van verskeie isotaktiese polipropileen polimere versoenbaar was en dat kokristallisasie plaasgevind het, terwyl vermengings van sindiotaktiese polipropileen en verskeie isotaktiese polipropilene nie versoenbaar was nie en dat ‘n mate van fase-skeiding plaasgevind het. Optiese mikroskopie (OM) en skandeer-elektronmikroskopie (SEM) is gebruik om die morfologiese eienskappe van verskillende isotaktiese polipropilene te bepaal. Goed gedefineerde en groot sferulitiese morfologie van gemengde a1 (onordelike struktuur) en a2 (ordelike struktuur) kristal-strukture is waargeneem. OM en SEM beelde het ook gewys dat molekulêre massa en taktisiteit ‘n effek het op die kristalstruktuur van die verskillende polipropileenmonsters. Laastens is die meganiese eienskappe van ‘n verskeidenheid homopolimere en vermengde materiale bestudeer, deur gebruik te maak van mikro-hardheid metings en dinamiesmeganiese analise (DMA).
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Forde, Janice. "The molecular biology of the high molecular weight glutenin subunits of wheat". Thesis, Rothamsted Research, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.352836.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Molecular weight"

1

Barrowcliffe, Trevor W. Low molecular weight heparin. Chichester, West Sussex, England: Wiley, 1992.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

R, Cooper Anthony, ed. Determination of molecular weight. New York: J. Wiley, 1989.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Kampen, Thorsten U. Low Molecular Weight Organic Semiconductors. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2010. http://dx.doi.org/10.1002/9783527629978.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Bäckvall, Helena, e Janne Lehtiö, eds. The Low Molecular Weight Proteome. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-7209-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Thromoprophylaxis with low-molecular-weight heparins. London: Current Medicine Group, 2006.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Nightingale, Philip D. Low molecular weight halocarbons in seawater. Norwich: University of East Anglia, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Hyers, Thomas M. Treatment handbook of low-molecular-weight heparin. London: Science Press, 2000.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Center, Langley Research, ed. Effect of molecular weight on polyphenylquinoxaline properties. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Christian, Doutremepuich, ed. Low molecular weight heparins in clinical practice. New York: Dekker, 1992.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Zhu, Yibo. Two-dimensional material-based nanosensors for detection of low-molecular-weight molecules. [New York, N.Y.?]: [publisher not identified], 2018.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Molecular weight"

1

Cernicharo, Jose. "Molecular Weight". In Encyclopedia of Astrobiology, 1080. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-11274-4_1020.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Quintanilla, José Cernicharo. "Molecular Weight". In Encyclopedia of Astrobiology, 1613. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44185-5_1020.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Gooch, Jan W. "Molecular Weight". In Encyclopedic Dictionary of Polymers, 471. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7647.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Crompton, T. R. "Molecular Weight". In Practical Polymer Analysis, 304–21. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2874-6_8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Quintanilla, José Cernicharo. "Molecular Weight". In Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-27833-4_1020-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Quintanilla, José Cernicharo. "Molecular Weight". In Encyclopedia of Astrobiology, 1998. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65093-6_1020.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Quintanilla, José Cernicharo. "Molecular Weight". In Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-642-27833-4_1020-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Mishra, Munmaya, e Biao Duan. "Molecular Weight". In The Essential Handbook of Polymer Terms and Attributes, 111–12. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781003161318-109.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Gooch, Jan W. "Weight-Average Molecular Weight". In Encyclopedic Dictionary of Polymers, 808. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12767.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Gooch, Jan W. "Weight-Average Molecular Weight". In Encyclopedic Dictionary of Polymers, 808. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12768.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Molecular weight"

1

Zampini, Anthony, Pamela Turci, George J. Cernigliaro, Harold F. Sandford, Gary J. Swanson, Catherine C. Meister e Roger F. Sinta. "High-resolution positive photoresists: novolac molecular weight and molecular weight distribution effects". In Microlithography '90, 4-9 Mar, San Jose, editado por Michael P. C. Watts. SPIE, 1990. http://dx.doi.org/10.1117/12.20105.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Hamblin, Mark J., Yee Chan-Li, Samuel L. Collins, Robert W. Hallowell e Maureen R. Horton. "Low Molecular Weight Statin Derivatives Inhibit Low Molecular Weight Hyaluronan Induced Inflammatory Signals". In American Thoracic Society 2011 International Conference, May 13-18, 2011 • Denver Colorado. American Thoracic Society, 2011. http://dx.doi.org/10.1164/ajrccm-conference.2011.183.1_meetingabstracts.a2855.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Wei, Fang, Erick Acosta, Kiran Gawas e Pushkala Krishnamurthy. "Targeting High Molecular Weight Wax". In SPE International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 2015. http://dx.doi.org/10.2118/173775-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Davied, S., Y. F. Nicolau, F. Melis e A. Revillon. "Molecular weight determinaiton of polyaniline". In International Conference on Science and Technology of Synthetic Metals. IEEE, 1994. http://dx.doi.org/10.1109/stsm.1994.835410.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Kabanemi, Kalonji K., Jean-Franc¸ois He´tu e Samira H. Sammoun. "Experimental Study on Flow-Front Fingering Instabilities in Injection Molding of Polymer Solutions and Melts". In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59078.

Texto completo da fonte
Resumo:
An experimental investigation of the flow behavior of dilute, semi-dilute and concentrated polymer solutions has been carried out to gain a better understanding of the underlying mechanisms leading to the occurrence of instabilities at the advancing flow front during the filling of a mold cavity. Experiments were performed using various mass concentrations of low and high molecular weight polyacrylamide polymers in corn syrup and water. This paper reports a new type of elastic fingering instabilities at the advancing flow front that has been observed only in semi-dilute polymer solutions of high molecular weight polymers. These flow front elastic instabilities seem to arise as a result of a mixture of widely separated high molecular weight polymer molecules and low molecular weight solvent molecules, which gives rise to a largely non-uniform polydisperse solution, with respect to all the kinds of molecules in the resulting mixture (solvent molecules and polymer molecules). The occurrence of these instabilities appears to be independent of the injection flow rate and the cavity thickness. Moreover, these instabilities do not manifest themselves in dilute or concentrated regimes, where respectively, polymer molecules and solvent molecules are minor perturbation of the resulting solution. In those regimes, smooth flow fronts are confirmed from our experiments. Based on these findings, the experimental investigations have been extended to polymer melts. Different mixtures of polycarbonate melts of widely separated molecular weights (low and high molecular weights) were first prepared. The effect of the large polydispersity of the resulting mixtures on the flow front behavior was subsequently studied. The same instabilities at the flow front were observed only in the experiments where a very small amount of high molecular weight polycarbonate polymer has been mixed to a low molecular weight polycarbonate melt (oligomers).
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Xianhong Wang, Lixiang Wang, Xiabin Jing e Fosong Wang. "Molecular weight and properties of polyaniline". In International Conference on Science and Technology of Synthetic Metals. IEEE, 1994. http://dx.doi.org/10.1109/stsm.1994.835362.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Panin, S. V., L. A. Kornienko, T. Nguen Suan, L. P. Ivanova, M. A. Korchagin, M. V. Chaikina, S. V. Shilko e Yu M. Pleskachevskiy. "Biocompatible composites of ultrahigh molecular weight polyethylene". In ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4932864.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Yamaguchi, Toru, Kenji Yamazaki e Hideo Namatsu. "Molecular weight effect on line-edge roughness". In Microlithography 2003, editado por Theodore H. Fedynyshyn. SPIE, 2003. http://dx.doi.org/10.1117/12.485049.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Stloukal, Petr, Marek Koutny, Vladimir Sedlarik e Pavel Kucharczyk. "Biodegradation of high molecular weight polylactic acid". In 6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2012. http://dx.doi.org/10.1063/1.4738385.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Cizek, Jan, Radek Musalek, Jan Medricky, Tomas Tesar, Frantisek Lukac, Tomas Chraska e Daniel Dukovsky. "Suspension Spraying Tip: High Molecular Weight Solvent". In ITSC2021, editado por F. Azarmi, X. Chen, J. Cizek, C. Cojocaru, B. Jodoin, H. Koivuluoto, Y. C. Lau et al. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.itsc2021p0548.

Texto completo da fonte
Resumo:
Abstract In suspension spraying, the two most frequently used solvents are water and ethanol. In this study, we test a potential alternative, a high-molecular weight solvent. Two organic solvents are compared: ethanol (serving as a benchmark, suspension formulated at 10 wt.% solid load) and di-propylene glycol methyl ether (two suspensions at 10 wt.% and 20 wt.%). Submicron alpha-alumina powder is used as a model material to formulate the suspensions. It is shown that ethanol- and ether-based-feedstock coatings are fully comparable in terms of their microstructure, porosity content, surface roughness, and hardness. However, the ether-based coatings exhibit slightly higher levels of α-Al2O3 phase than their ethanol-based counterpart (17 wt.% vs. 6 wt.%). The use of 20 wt.% solid load in the ether solvent leads to a twofold increase in the deposition rate while, as opposed to ethanol, successfully retaining a dense microstructure. Ether also costs less than ethanol and is safer to handle.
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Molecular weight"

1

Guttman, Charles M., John R. Maurey e Peter H. Verdier. Determination of the weight average molecular weight of SRM 1480. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.ir.4837.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Roberts, Christine Cardinal, Alan Graham, Martin Nemer, Leslie M. Phinney, Robert M. Garcia, Melissa Marie Soehnel e Emily Kate Stirrup. Physical Properties of Low-Molecular Weight Polydimethylsiloxane Fluids. Office of Scientific and Technical Information (OSTI), fevereiro de 2017. http://dx.doi.org/10.2172/1343365.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Long, Treva, e Ferdinand Rodriguez. Dissolution of Poly(p-hydroxystyrene): Molecular Weight Effects. Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 1991. http://dx.doi.org/10.21236/ada232155.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

DeSimone, Joseph, e Douglas Kiserow. Synthesis of High Molecular Weight Polycarbonates Using Supercritical CO2. Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 2001. http://dx.doi.org/10.21236/ada392832.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Ternan, M., P. Rahimi, D. Liu e D. M. Clugston. Coprocessing: elemental and molecular weight distributions in unconverted vacuum residues. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1994. http://dx.doi.org/10.4095/304596.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Kelly, Daniel, e April Dawn Longhair. XPS and IR Characterization of Ultra-High Molecular Weight Polyethylene. Office of Scientific and Technical Information (OSTI), maio de 2015. http://dx.doi.org/10.2172/1179842.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Wick, Charles H., e Patrick E. McCubbin. Filtration Characteristics of MS2 Bacteriophage Using Various Molecular Weight Filters. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1999. http://dx.doi.org/10.21236/ada368535.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Fang, Hsu-Wei, Stephen M. Hsu e Jan V. Sengers. Ultra-high molecular weight polyethylene wear particle effects on bioactivity. Gaithersburg, MD: National Institute of Standards and Technology, 2003. http://dx.doi.org/10.6028/nist.sp.1002.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Zhang, Timothy G., Sikhanda S. Satapathy, Lionel R. Vargas-Gonzalez e Shawn M. Walsh. Modeling Ballistic Response of Ultra-High-Molecular-Weight Polyethylene (UHMWPE). Fort Belvoir, VA: Defense Technical Information Center, julho de 2016. http://dx.doi.org/10.21236/ad1012075.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Gao, H. Crosslinked, flexible, low-molecular-weight polyacrylamide gels for mobility control. Office of Scientific and Technical Information (OSTI), dezembro de 1989. http://dx.doi.org/10.2172/5405561.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Molecular weight":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia