Literatura científica selecionada sobre o tema "Modeling and parametric calibration"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Modeling and parametric calibration".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Modeling and parametric calibration"
Mauro, Francisco, Andrew T. Hudak, Patrick A. Fekety, Bryce Frank, Hailemariam Temesgen, David M. Bell, Matthew J. Gregory e T. Ryan McCarley. "Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon". Remote Sensing 13, n.º 2 (13 de janeiro de 2021): 261. http://dx.doi.org/10.3390/rs13020261.
Texto completo da fonteLucor, Didier, e Olivier P. Le Maître. "Cardiovascular Modeling With Adapted Parametric Inference". ESAIM: Proceedings and Surveys 62 (2018): 91–107. http://dx.doi.org/10.1051/proc/201862091.
Texto completo da fonteMishra, Manish. "Review on Analysis of Free Vibrational Horizontally Curved Bridges". International Journal for Research in Applied Science and Engineering Technology 9, n.º VII (31 de julho de 2021): 3463–69. http://dx.doi.org/10.22214/ijraset.2021.36682.
Texto completo da fonteRzehak, Roland, e Eckhard Krepper. "CFD for Subcooled Flow Boiling: Parametric Variations". Science and Technology of Nuclear Installations 2013 (2013): 1–22. http://dx.doi.org/10.1155/2013/687494.
Texto completo da fonteSchepen, Andrew, Yvette Everingham e Quan J. Wang. "On the Joint Calibration of Multivariate Seasonal Climate Forecasts from GCMs". Monthly Weather Review 148, n.º 1 (1 de janeiro de 2020): 437–56. http://dx.doi.org/10.1175/mwr-d-19-0046.1.
Texto completo da fonteGhnatios, Chady, Khalil El Rai, Nicolas Hascoet, Pierre-Adrien Pires, Jean-Louis Duval, Jon Lambarri, Jean-Yves Hascoet e Francisco Chinesta. "Reduced order modeling of selective laser melting: from calibration to parametric part distortion". International Journal of Material Forming 14, n.º 5 (31 de março de 2021): 973–86. http://dx.doi.org/10.1007/s12289-021-01613-z.
Texto completo da fonteChen, Hua-Zhou, Kai Shi, Ken Cai, Li-Li Xu e Quan-Xi Feng. "Investigation of sample partitioning in quantitative near-infrared analysis of soil organic carbon based on parametric LS-SVR modeling". RSC Advances 5, n.º 98 (2015): 80612–19. http://dx.doi.org/10.1039/c5ra12468a.
Texto completo da fonteMang, Andreas, Spyridon Bakas, Shashank Subramanian, Christos Davatzikos e George Biros. "Integrated Biophysical Modeling and Image Analysis: Application to Neuro-Oncology". Annual Review of Biomedical Engineering 22, n.º 1 (4 de junho de 2020): 309–41. http://dx.doi.org/10.1146/annurev-bioeng-062117-121105.
Texto completo da fonteGhnatios, Chady, Khalil El Rai, Nicolas Hascoet, Pierre-Adrien Pires, Jean-Louis Duval, Jon Lambarri, Jean-Yves Hascoet e Francisco Chinesta. "Correction to: reduced order modeling of selective laser melting: from calibration to parametric part distortion". International Journal of Material Forming 14, n.º 5 (4 de agosto de 2021): 987. http://dx.doi.org/10.1007/s12289-021-01638-4.
Texto completo da fonteSheng, J., S.-Y. Yang e W. Tong. "Implicitization of the Vegter Yield Criterion". IOP Conference Series: Materials Science and Engineering 1238, n.º 1 (1 de maio de 2022): 012007. http://dx.doi.org/10.1088/1757-899x/1238/1/012007.
Texto completo da fonteTeses / dissertações sobre o assunto "Modeling and parametric calibration"
Wan, Shuang. "Parametric array calibration". Thesis, University of Edinburgh, 2011. http://hdl.handle.net/1842/4902.
Texto completo da fonteOsborne, Christine. "Non-parametric calibration". Thesis, University of Bath, 1990. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293248.
Texto completo da fonteWenger, Jonathan. "Non-Parametric Calibration for Classification". Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-262652.
Texto completo da fonteMånga applikationer för klassificeringsmetoder kräver inte bara hög noggrannhet utan även tillförlitlig uppskattning av osäkerheten av beräknat utfall. Detta är av särskild betydelse inom områden som datorseende eller robotik, där säkerhetskritiska beslut fattas utifrån klassificeringsresultat. Medan många av de nuvarande klassificeringsverktygen, i synnerhet djupa neurala nätverksarkitekturer, ger resultat när det gäller noggrannhet, tenderar de att felaktigt uppskatta strukturens osäkerhet. I detta examensarbete fokuserar vi på sannolikhetskalibrering, d.v.s. hur väl en klassificerares förtroende för ett resultat stämmer överens med den faktiska empiriska säkerheten. Vi studerar kalibrering ur ett teoretiskt perspektiv och kopplar det till över- och underförtroende, två begrepp som introducerades första gången i samband med aktivt lärande. Huvuddelen av arbetet är framtagandet av en ny algoritm för klassificeringskalibrering. Vi föreslår en icke-parametrisk kalibreringsmetod som, till skillnad från befintliga tillvägagångssätt, bygger på en latent Gaussisk process och som är specielltutformad för klassificering av flera klasser. Algoritmen är inte begränsad till neurala nätverk utan kan tillämpas på alla klassificeringsmetoder som ger konfidensberäkningar. Vi demonstrerar vår metods allmänt starka prestanda över olika klassifikatorer och kända datamängder från datorseende i motsats till befintliga klassificeringskalibreringstekniker. Slutligen utvärderas effektiviteten av kalibreringen vid aktivt lärande.
Tachet, des combes Rémi. "Non-parametric model calibration in finance". Phd thesis, Ecole Centrale Paris, 2011. http://tel.archives-ouvertes.fr/tel-00658766.
Texto completo da fonteXiang, Yi. "Implied volatility smirk and non-parametric calibration /". View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?MATH%202004%20XIANG.
Texto completo da fonteIncludes bibliographical references (leaves 107-114). Also available in electronic version. Access restricted to campus users.
COELHO, LUIZ CRISTOVAO GOMES. "SHELL MODELING WITH PARAMETRIC INTERSECTION". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1998. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=2780@1.
Texto completo da fonteApresenta-se uma metodologia para modelagem de cascas para elementos finitos definidas em superfícies paramétricas. A metodologia consiste na criação de curvas e geração de malhas sobre os retalhos paramétricos constru´ıdos com base nestas curvas, que também são usadas para a conexão de malhas adjacentes. O modelo final é uma representação de todas as malhas combinadas em uma única estrutura de dados. As ferramentas básicas para geração de tais malhas são uma interface para modelagem de curvas espaciais e os algoritmos geom´etricos para construcão de mapeamentos nos domínios elementares. O problema central em modelagens compostas é o tratamento dado às malhas em superfícies que se interceptam. Um algoritmo capaz de modelar com precisão as curvas de interseção e de ajustar as duas malhas para as novas restrições geradas é apresentado neste trabalho. O algoritmo é parte de um programa completo para modelagem interativa de cascas, que tem sido usado no projeto de grandes sistemas flutuantes para explotação de petróleo em águas profundas. O uso de uma variante da estrutura de dados DCEL, que usa árvores de ordenação espacial para armazenar as entidades topol´ogicas ao invés de listas ou vetores, permite que malhas bastante refinadas sejam reconstru´ıdas em tempo compatível com o trabalho interativo. Estas árvores aceleram os cálculos de interseção necessários à determinação dos pontos de interpolação das curvas de trimming, permitindo tamb´em a reconstrução das malhas usando-se apenas consultas locais.
We present a methodology for modeling finite-element meshes defined on parametric surface patches. The idea is to build curves and generate meshes over the parametric patches built with these curves, which also connect adjacent meshes. The final model is a representation of all meshes combined into a single data structure. The basic tools to generate such meshes are the user interface to model space curves and the geometric algorithms to construct the elementary domain mappings. The main problem in composite modeling is how to handle mesh surfaces that intersect each other. We present an algorithm that models the intersection curves precisely and adjusts both meshes to the newly formed borders. The algorithm is part of an interactive shell modeling program, which has been used in the design of large offshore oil structures. We avoid unacceptable interaction delays by using a variant of the DCEL data structure that stores topological entities in spatial indexing trees instead of linked lists. These trees speed up the intersection computations required to determine points of the trimming curves, and also allows mesh reconstruction using only local queries.
Hoare, Armando. "Parametric, non-parametric and statistical modeling of stony coral reef data". [Tampa, Fla] : University of South Florida, 2008. http://purl.fcla.edu/usf/dc/et/SFE0002470.
Texto completo da fonteBasso, Filippo. "A non-parametric Calibration Algorithm for Depth Sensors Exploiting RGB Cameras". Doctoral thesis, Università degli studi di Padova, 2015. http://hdl.handle.net/11577/3424206.
Texto completo da fonteI sensori di profondità sono dispositivi comuni sui robot moderni. Essi forniscono al robot informazioni sulla distanza e sulla forma degli oggetti nel loro campo di visione, permettendogli di agire di conseguenza. In particolare, l’arrivo negli ultimi anni di sensori RGB-D di consumo come Microsoft Kinect, ha favorito lo sviluppo di algoritmi per la robotica basati su dati di profondità. Di fatto, questi sensori sono in grado di generare una grande quantità di dati ad un prezzo relativamente basso. In questa tesi vengono affrontati tre diversi problemi riguardanti la calibrazione di sensori di profondità. Il primo contributo originale allo stato dell’arte è un algoritmo per stimare l’asse di rotazione di un laser range finder (LRF) 2D montato su un supporto rotante. La differenza chiave con gli altri approcci è l’utilizzo di vincoli punto-piano derivanti dalla cinematica per stimare la posizione del LRF rispetto ad una videocamera fissa, e l’uso di una screw decomposition per stimare l’asse di rotazione. La corretta ricostruzione di una stanza dopo la calibrazione valida l’algoritmo proposto. Il secondo e più importante contributo originale di questa tesi è un algoritmo completamente automatico per la calibrazione di sensori di profondità a luce strut- turata (ad esempio Kinect). La chiave di questo lavoro è la separazione dell’errore di profondità in due componenti, entrambe corrette pixel a pixel. Questa separa- zione, validata da osservazioni sperimentali, permette di ridurre sensibilmente il numero di parametri nell’ottimizzazione finale e, di conseguenza, il tempo neces- sario affinché la soluzione converga al minimo globale. Il confronto tra le immagini di profondità di un test set, corrette con i parametri di calibrazione ottenuti, e quelle attese, dimostra che la differenza tra le due è solamente di una quantità ca- suale. Un’analisi qualitativa della fusione tra dati di profondità e RGB conferma ulteriormente l’efficacia dell’approccio. Inoltre, un pacchetto ROS per calibrare e correggere i dati generati da Kinect è disponibile open source. Il terzo contributo riportato nella tesi è un nuovo algoritmo distribuito per la calibrazione di reti composte da videocamere e sensori di profondità già calibrati. Un pacchetto ROS che implementa l’algoritmo proposto è stato rilasciato come parte di un grande progetto open source per il tracking di persone: OpenPTrack. Il pacchetto sviluppato è in grado di calibrare reti composte da una decina di sensori in tempo reale (non è necessario processare i dati in un secondo tempo), sfruttando vincoli piano-piano e un’ottimizzazione non lineare.
Holden, Christian. "Modeling and Control of Parametric Roll Resonance". Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for teknisk kybernetikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-12736.
Texto completo da fonteQvarngård, Daniel. "Modeling Optical Parametric Generation in Inhomogeneous Media". Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-74256.
Texto completo da fonteLivros sobre o assunto "Modeling and parametric calibration"
American Society of Mechanical Engineers., ed. Parametric calibration of coordinate measuring machines. New York: ASME, 1991.
Encontre o texto completo da fonteShih, Randy H. Parametric modeling with solidworks 2010. [Place of publication not identified]: Schroff Development Corp, 2010.
Encontre o texto completo da fonteJohn, Wilson. Mechanical desktop 5: Parametric modeling. Lawrence, Kan: CMP Books, 2001.
Encontre o texto completo da fonteShih, Randy H. Parametric Modeling with SolidWorks 2013. Mission, Kan: SDC Publications, 2013.
Encontre o texto completo da fonteShih, Randy H. Parametric modeling with Autodesk Inventor 2011. Mission, Kansas: Schroff Development Corporation, 2010.
Encontre o texto completo da fonteShih, Randy H. Parametric modeling with Autodesk Inventor 2013. Mission, KS: SDC Publications, 2012.
Encontre o texto completo da fonteShih, Randy H. Parametric modeling with Autodesk Inventor 2016. Mission, Kan: SDC Publications, 2015.
Encontre o texto completo da fonteNardi Rezende, Rene, ed. Liquid Rocket Engine Thrust Chamber Parametric Modeling. Warrendale, PA: SAE International, 2018. http://dx.doi.org/10.4271/0768093333.
Texto completo da fonteLoFaso, James P. Parametric modeling using Inventor: Autodesk Inventor 11. Tinley Park, Ill: Goodheart-Willcox Co., 2007.
Encontre o texto completo da fonteLoFaso, James P. Parametric modeling using Inventor: Autodesk inventor 2008. Tinley Park, Ill: The Goodheart-Willcox Company, 2007.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Modeling and parametric calibration"
Horejš, Otakar, Martin Mareš, Michal Straka, Jiří Švéda e Tomáš Kozlok. "Adaptive Thermal Error Compensation Model of a Horizontal Machining Centre". In Lecture Notes in Production Engineering, 83–98. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_7.
Texto completo da fonteMareš, Martin, Otakar Horejš e Pravoslav Nykodym. "An Indicative Model Considering Part of the Thermo-Mechanical Behaviour of a Large Grinding Machine". In Lecture Notes in Production Engineering, 54–66. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_5.
Texto completo da fonteReiss, Rolf-Dieter, e Michael Thomas. "Parametric Modeling". In Statistical Analysis of Extreme Values, 3–36. Basel: Birkhäuser Basel, 1997. http://dx.doi.org/10.1007/978-3-0348-6336-0_1.
Texto completo da fonteAhmed, Mukhtar, Shakeel Ahmad, Muhammad Ali Raza, Uttam Kumar, Muhammad Ansar, Ghulam Abbas Shah, David Parsons, Gerrit Hoogenboom, Taru Palosuo e Sabine Seidel. "Models Calibration and Evaluation". In Systems Modeling, 151–78. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4728-7_5.
Texto completo da fonteHarrell, Frank E. "Parametric Survival Models". In Regression Modeling Strategies, 423–51. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19425-7_18.
Texto completo da fonteHarrell, Frank E. "Parametric Survival Models". In Regression Modeling Strategies, 413–42. New York, NY: Springer New York, 2001. http://dx.doi.org/10.1007/978-1-4757-3462-1_17.
Texto completo da fonteKahle, Waltraud, e Heide Wendt. "Parametric Shock Models". In Advances in Degradation Modeling, 77–104. Boston, MA: Birkhäuser Boston, 2009. http://dx.doi.org/10.1007/978-0-8176-4924-1_6.
Texto completo da fonteRoller, Dieter. "Advanced Methods for Parametric Design". In Geometric Modeling, 251–66. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-76404-2_11.
Texto completo da fonteWu, Lixin. "Calibration of LIBOR Market Model". In Interest Rate Modeling, 189–224. 2nd edition. | Boca Raton, Florida : CRC Press, [2019]: CRC Press, 2019. http://dx.doi.org/10.1201/9781351227421-7.
Texto completo da fonteJohora, Fatema Tuj. "Calibration Methodology". In Modeling Interactions among Pedestrians and Cars in Shared Spaces, 95–107. Wiesbaden: Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-38345-9_6.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Modeling and parametric calibration"
HAMM, CA, e P. HINES. "MEASUREMENTS AND MODELLING ON A HIGH-POWER, LOW FREQUENCY PARAMETRIC ARRAY". In Underwater Acoustic Calibration and Measurements 1998. Institute of Acoustics, 2024. http://dx.doi.org/10.25144/18897.
Texto completo da fonteYang, Bin, Tomas McKelvey, Mats Viberg e Guanghan Xu. "Array calibration using array response interpolation and parametric modeling". In 2015 23rd European Signal Processing Conference (EUSIPCO). IEEE, 2015. http://dx.doi.org/10.1109/eusipco.2015.7362601.
Texto completo da fonteMoebus, Marco, Holger Degenhardt e Abdelhak Zoubir. "Local array calibration using parametric modeling of position errors and a sparse calibration grid". In 2009 IEEE/SP 15th Workshop on Statistical Signal Processing (SSP). IEEE, 2009. http://dx.doi.org/10.1109/ssp.2009.5278542.
Texto completo da fonteWang, Feng, Mengzhen Kang, Qi Lu, Hui Han, Véronique Letort, Yan Guo, Philippe de Reffye e Baoguo Li. "Calibration of Topological Development in the Procedure of Parametric Identification: Application of the Stochastic GreenLab Model for Pinus sylvestris var. mongolica". In 2009 Third International Symposium on Plant Growth Modeling, Simulation, Visualization and Applications (PMA). IEEE, 2009. http://dx.doi.org/10.1109/pma.2009.35.
Texto completo da fonteCarter, Jordan, e Aikaterini Genikomsou. "Finite element modeling of concrete beams reinforced with basalt FRP bars". In IABSE Congress, New York, New York 2019: The Evolving Metropolis. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/newyork.2019.0460.
Texto completo da fontePetrella, Orsola, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta e Marco Laracca. "Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration". In 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE, 2013. http://dx.doi.org/10.1109/i2mtc.2013.6555698.
Texto completo da fonteNannapaneni, Saideep, e Sankaran Mahadevan. "Manufacturing Process Evaluation Under Uncertainty: A Hierarchical Bayesian Network Approach". In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59226.
Texto completo da fonteSchoenhardt, Matthew, Vachel Pardais, Cheryl Fortin, Brent Kitson e Jay Hanzel. "Enbridge Cost and Schedule Contingency Assessments". In 2012 9th International Pipeline Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ipc2012-90259.
Texto completo da fontePereira, Israel Cubas, e Diego F. B. Sarzosa. "Calibration and Verification of XFEM Model to Predict Ductile Fracture". In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-84341.
Texto completo da fonteDurocher, Antoine, Gilles Bourque e Jeffrey M. Bergthorson. "Bayesian Calibration of Kinetic Parameters in the CH Chemistry Towards Accurate Prompt-NO Modelling". In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-78466.
Texto completo da fonteRelatórios de organizações sobre o assunto "Modeling and parametric calibration"
Proctor, Camron, e Steven Wiryadinata. Parametric Vehicle Choice Modeling: ParaChoice. Office of Scientific and Technical Information (OSTI), janeiro de 2020. http://dx.doi.org/10.2172/1598100.
Texto completo da fonteMoses, Randolph L. Parametric Signature Modeling for Target Identification. Fort Belvoir, VA: Defense Technical Information Center, maio de 1995. http://dx.doi.org/10.21236/ada296734.
Texto completo da fonteGolish, L. M., e Eric D. Griffith. Analysis of Parametric Design Applications for Modeling Military Standard Facilities. Fort Belvoir, VA: Defense Technical Information Center, julho de 1992. http://dx.doi.org/10.21236/ada255740.
Texto completo da fonteNordham, David J. Automated Ship Auxiliary Systems Design Process -- Ship Parametric Modeling Program. Fort Belvoir, VA: Defense Technical Information Center, março de 1993. http://dx.doi.org/10.21236/ada261834.
Texto completo da fonteKay, Steven, e Debasis Sengupta. Detection in Incompletely Characterized Colored Non-Gaussian Noise via Parametric Modeling. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1986. http://dx.doi.org/10.21236/ada175402.
Texto completo da fonteShi, Liang, Xiaobing Liu, Ming Qu, Mingkan Zhang e Lingshi Wang. Numerical Modeling and Parametric Study of a Dual Purpose Underground Thermal Battery. Office of Scientific and Technical Information (OSTI), agosto de 2021. http://dx.doi.org/10.2172/1818730.
Texto completo da fonteBaker, Benjamin, Javier Ortensi e Mark DeHart. FY 2017 Modeling of the M8 Calibration Series using MAMMOTH. Office of Scientific and Technical Information (OSTI), junho de 2017. http://dx.doi.org/10.2172/1408512.
Texto completo da fonteGoodman, Carolyn, Laura Hinkle, Trevor Hardy e Hayden Reeve. Building Model Calibration: Validation of GridLAB-D Thermal Dynamics Modeling. Office of Scientific and Technical Information (OSTI), novembro de 2022. http://dx.doi.org/10.2172/1897180.
Texto completo da fontePeterson, John R., P. J. Marshall e K. Andersson. Smoothed Particle Inference: A Kilo-Parametric Method for X-ray Galaxy Cluster Modeling. Office of Scientific and Technical Information (OSTI), agosto de 2005. http://dx.doi.org/10.2172/878813.
Texto completo da fonteGoodhue, Rachael, e Carlo Russo. Modeling Processor Market Power and the Incidence of Agricultural Policy: A Non-parametric Approach. Cambridge, MA: National Bureau of Economic Research, janeiro de 2011. http://dx.doi.org/10.3386/w16706.
Texto completo da fonte