Literatura científica selecionada sobre o tema "Microstructure Complexe"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Microstructure Complexe".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Microstructure Complexe"
Nolan, T. P., R. Sinclair, T. Yamashita e R. Ranjan. "Correlation of micro-structural, micro-chemical and micro-magnetic properties of longitudinal recording media using CM20FEG Lorentz TEM". Proceedings, annual meeting, Electron Microscopy Society of America 52 (1994): 892–93. http://dx.doi.org/10.1017/s042482010017219x.
Texto completo da fonteMüller, Martin, Marie Stiefel, Björn-Ivo Bachmann, Dominik Britz e Frank Mücklich. "Overview: Machine Learning for Segmentation and Classification of Complex Steel Microstructures". Metals 14, n.º 5 (7 de maio de 2024): 553. http://dx.doi.org/10.3390/met14050553.
Texto completo da fonteTalmon, Yeshayahu. "Cryo-TEM of amphiphilic polymer and amphiphile/polymer solutions". Proceedings, annual meeting, Electron Microscopy Society of America 51 (1 de agosto de 1993): 876–77. http://dx.doi.org/10.1017/s0424820100150216.
Texto completo da fonteYue, Tao, Shenyu Gu, Na Liu, Yuanyuan Liu, Yancong Yu, Xinye Zhang, Weixia Lan, Toshio Fukuda, Long Li e Quan Zhang. "Self-alignment of microstructures based on lateral fluidic force generated by local spatial asymmetry inside a microfluidic channel". AIP Advances 12, n.º 3 (1 de março de 2022): 035335. http://dx.doi.org/10.1063/5.0086138.
Texto completo da fonteRodgers, Theron M., Hojun Lim e Judith A. Brown. "Three-Dimensional Additively Manufactured Microstructures and Their Mechanical Properties". JOM 72, n.º 1 (30 de outubro de 2019): 75–82. http://dx.doi.org/10.1007/s11837-019-03808-x.
Texto completo da fonteBeh, Chong You, Ee Meng Cheng, Xiao Jian Tan, Nashrul Fazli Mohd Nasir, Mohd Shukry Abdul Majid, Mohd Ridzuan Mohd Jamir, Shing Fhan Khor, Kim Yee Lee e Che Wan Sharifah Robiah Mohamad. "Complex Impedance and Modulus Analysis on Porous and Non-Porous Scaffold Composites Due to Effect of Hydroxyapatite/Starch Proportion". Polymers 15, n.º 2 (8 de janeiro de 2023): 320. http://dx.doi.org/10.3390/polym15020320.
Texto completo da fonteKim, Young Ho, Jeong-Woo Sohn, Youngjae Woo, Joo-Hyun Hong, Gyu Man Kim, Bong Keun Kang e Juyoung Park. "Preparation of Microstructure Molds of Montmorillonite/Polyethylene Glycol Diacrylate and Multi-Walled Carbon Nanotube/Polyethylene Glycol Diacrylate Nanocomposites for Miniaturized Device Applications". Journal of Nanoscience and Nanotechnology 15, n.º 10 (1 de outubro de 2015): 7860–65. http://dx.doi.org/10.1166/jnn.2015.11224.
Texto completo da fonteGallardo-Basile, Francisco-José, Yannick Naunheim, Franz Roters e Martin Diehl. "Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study". Materials 14, n.º 3 (2 de fevereiro de 2021): 691. http://dx.doi.org/10.3390/ma14030691.
Texto completo da fonteSantos, Dagoberto Brandão, Élida G. Neves e Elena V. Pereloma. "Effect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled Steel". Materials Science Forum 539-543 (março de 2007): 4375–80. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.4375.
Texto completo da fonteAbdalla, Ayad Omran, Astuty Amrin, Roslina Mohammad e M. A. Azmah Hanim. "Microstructural Study of Newly Designed Ti-6Al-1Fe Alloy through Deformation". Solid State Phenomena 264 (setembro de 2017): 54–57. http://dx.doi.org/10.4028/www.scientific.net/ssp.264.54.
Texto completo da fonteTeses / dissertações sobre o assunto "Microstructure Complexe"
Aouak, Taïeb. "Homopolymérisation et copolymérisation des alcynes monosubstitués amorceées par les complexes de Ziegler-Natta : étude de réactions conduites en présence de catalyseurs solubles formés en associant un carboxylate de fer(III) et un alkylaluminium, caractérisation des polyalcynes". Vandoeuvre-les-Nancy, INPL, 1994. http://docnum.univ-lorraine.fr/public/INPL_T_1994_AOUAK_T.pdf.
Texto completo da fonteKhal, Jeaidi Hana El. "Relations frittage - microstructure - propriétés électriques des céramiques de type LAMOX". Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI069/document.
Texto completo da fonteThe La_2 Mo_1,5 W_0,5 O_9 (LMW05) material is an ionic conductor of the LAMOX family which has recently shown a great potential as a solid electrolyte in high temperature electrochemical systems. The aim of this thesis is double: firstly, to study the effects of certain microstructural parameters, essentially the porosity, on the electrical response of LMW05 ceramic samples and, on the other hand, to apply the flash sintering process for the preparation of dense samples. Porous samples were obtained by varying the sintering temperature in the range of 750 to 1100 °C. Complex impedance spectroscopy was systematically used to evaluate the effect of porosity on the electrical response of LMW05. The electrical response, observed at high frequency (HF) on the impedance diagrams, is greatly affected by the porosity. It depends on the morphology and the location of pores. Effective medium theories were used for the interpretation of obtained results. The Bruggeman approximation proved to be better suited to describe the high frequency electrical response for 0 < P ≤ 22%. Compared with YSZ-type ceramics, the porous LMW05 was found to have a low blocking factor α_R. This low value is related to the morphology of the pores which are spherical in shape and large in size. The contacting of two dense pellets allowed us to simulate the contact between two grains of LMW05.The flash sintering process has been successfully tested for the preparation of LMW05 samples. Particular attention is paid to optimizing the conditions of the flash sintering onset. We have shown that the sintered LMW05 samples exhibit the same electrical behavior independently to the employed sintering process
Badetti, Michel. "Rhéologie des matériaux granulaires non saturés". Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1020/document.
Texto completo da fonteWith this doctoral research, we report on the solid and liquid-like mechanical behaviors of wet granular materials, which exhibit viscous and capillary effects. Such systems, standing between dry and immersed granular materials, are studied both in experiments and discrete numerical simulations, from the microstructural aspects to the mechanical behavior. We therefore adopt a multiscale approach whose purposes are to understand the origins and roles of capillary and viscous effects in constitutive laws and to include a microstructural description within these laws. We are interested in the simple bridge model for the illustration of viscous and capillary effects in the case of quasistatic and inertial flows, where the confining forces, the Coulomb friction and the liquid quantity can vary. To answer such questions, this thesis is articulated around the 3 following topics :- A study based on macroscopic rheological experiments with a simple model material (monodisperse polystyrene beads, wetted with a Newtonian silicon oil) which enables us to distinguish the flow regimes and to characterize the influence of cohesive effects. The experimental framework allows for long time shearing experiments, where the materials can reach their steady state behavior. Alike dry systems, wet granular materials still exhibit a quasistatic and an inertial regime with increasing flow velocity. We show the noticeable influence of capillary effects which strongly increases the shear resistance and reduces the materials density.- X-ray microtomographic experiments enabling the microstructural study of static samples. We witness a good homogeneity of our samples whether slightly or strongly saturated. A non-negligible number of very complex capillary bonds were detected, which stresses, when compared with macroscopic rheological results, their lack of influence on the flow properties. This result is very noticeable as it demonstrates the ability of the simple bridge model to illustrate the behavior of materials which would not be included a priori within its reach.- Discrete numerical simulations allowing us to strongly improve the range of the parameters of the study, especially in the case of material characteristics such as Coulomb friction. The micromechanical study emerging from simulations, allows us to analyze anisotropy, coordination and capillary stresses questions. We underline the great importance of long-range capillary interactions when using an effective stress model. The limits of such model, usually adopted to describe the behavior in the quasistatic regime, are also tested and debated in the inertial regime. The good agreement between numerical and experimental results enabled us to validate and calibrate a numerical model which, in return, offered a reliable analysis of microstructural effects for the understanding of the mechanical behavior and for the transition from the microscopic to the macroscopic scale
Lian, Weidong. "Contribution à l'homogénéisation numérique du comportement élastique de matériaux à microstructure complexe caractérisés par imagerie". Ecole centrale de Nantes, 2011. http://www.theses.fr/2011ECDN0004.
Texto completo da fonteComputational homogenization approaches are now widely used. Moreover, imaging techniques allow a highly accurate representation of material microstructure, and classically leads to voxel-based finite element models. Another computational approach for image-based modeling has been recently proposed, based on X-FEM and level set method. These two approaches are compared and it is shown that X-FEM/levelset approach is more efficient and accurate than the voxel-based FEM. Using microstructure images highlights its randomness, which raises the problem of the determination of the sizeof the RVE (reprentative volume element). It's shown that homogenization approaches with uniform strins or stresses boundary conditions lead to overcome these edge effects. At last a three scale homogenization approach is presented for problems where the macroscale is much larger than the microscale. An intermediate mescoscale is considered, with a size lower than the RVE size. At this mesoscale computed apparent properies are random variables. These are represented using polynomial chaos expensions identified from samples which are extracted from the image. Macroscopic samples are then generated, with a mesoscopic modeling scale, and a spacial distribution of apparent properties coming form the previous step. Applying again classical homogenization methods at this new scale allows the determination of RVE size
Dischler, Jean-Michel. "La génération de textures 3D et de textures a microstructure complexe pour la synthese d'images". Université Louis Pasteur (Strasbourg) (1971-2008), 1996. http://www.theses.fr/1996STR13015.
Texto completo da fonteDéléris, Jacqueline. "Plutonisme bimodal en contexte décrochant panafricain : étude pétro-structurale du complexe de Toro (Nigeria)". Toulouse 3, 1995. http://www.theses.fr/1995TOU30212.
Texto completo da fonteKaram, Marie-Céleste. "Réhydratation des protéines laitières dans un milieu complexe : influence de l'état d'hydratation sur les propriétés texturales des gels acides". Thesis, Université de Lorraine, 2013. http://www.theses.fr/2013LORR0132/document.
Texto completo da fonteThe main objectives of this work were to elucidate the rehydration mechanism of the two major milk proteins (micellar casein and whey protein) into a complex and opaque medium such as milk and to assess the influence of hydration state (defined as a function of rehydration length after 5,120,180,240,300, 480, 900 and 1440 minutes of rehydration) on the rheological, textural, physical properties and microstructure of the obtained acid milk gels. Whereas, micellar casein presented a long rehydration process into milk characterized by three stages: a wetting, swelling and dispersion phase, whey protein displayed a quick rehydration process characterized by an overlapping of wetting and dispersion phase. Furthermore, an extended rehydration time of micellar casein powder into the milk base was associated with a postponed onset of gelation and enhanced physical, textural as well as rheological properties of the obtained acid milk gels characterized by increases in gel firmness, strength, and decreases in syneresis susceptibility and grains formation. In contrast, acid milk gels prepared with whey protein powder exhibited comparable overall textural properties regardless the different rehydration times. Nevertheless, denaturation of whey protein powder (by dry heating) was associated with a deterioration of the textural properties of the acid milk gels. Finally, acid gels prepared with whey proteins displayed better overall textural quality than those prepared with micellar casein (except for grains formation)
Bibalou, Pascal Blaise. "Copolymérisation du 2,5 furannédione 3 méthyle et de l'acétate de vinyle influence d'un complexe entre comonomères sur la microstructure des copolymères". Grenoble 2 : ANRT, 1986. http://catalogue.bnf.fr/ark:/12148/cb37596030f.
Texto completo da fonteDu, Kou. "Modélisation micromécanique de géomatériaux en prenant en compte des anisotropies microstructurale et matricielle". Electronic Thesis or Diss., Université de Lorraine, 2021. http://docnum.univ-lorraine.fr/public/DDOC_T_2021_0254_DU.pdf.
Texto completo da fonteThe mechanical properties of heterogeneous geomaterials are evaluated by simultaneously taking into account the microstructural anisotropy as well as the one of matrix. To this end, the microstructural anisotropy is represented by the complexity of porous shape which is considered in the present work as concave or convex by particular attention to the superspherical and the axisymmetrical superspheroidal pores. The concentration and contribution tensors are numerically computed using Finite Element Method (FEM), which are next approximated by analytical expressions for the case of the concavity parameter being p<1, to evaluate the associated effective properties, such as effective elastic and thermal responses. Specifically, to solve the 2nd Eshelby problem (Eshelby (1961)) in the case of 3D non-ellipsoidal inhomogeneities, we make use of a recently developed adapted boundary condition (Adessina et al. (2017)) based on far-field solution (Sevostianov and Kachanov (2011)) to incorporate the matrix anisotropy and to correct the bias induced by the bounded character of the mesh domain, which allows to accelerate the computation convergence without sacrificing its accuracy. Simultaneously by complying with the numerical homogenization technique, the compliance/resistivity contribution tensors are computed for different forms of pores (particular attention of superspheroidal and superspherical ones) embedded in a transversely isotropic matrix. The proposed numerical method is shown to be efficient and accurate after several appropriate assessments and validation by comparing its predictions, in some particular cases, with analytical results and some available numerical ones. On the basis of these "3D" Finite Element Modeling, approximate relations of the property contribution tensors in the two aforementioned reference concave cases, supersphere and axisymmetric superspheroid, are developed for both elastic and thermal problems. Note here that the spherical pore (i.e. concavity parameter p=1) and circular crack (i.e. aspect ratio γ → 0), which can be considered as two particular cases, are also numerically studied. This allows to assess and validate the proposed method in the present work. Moreover, in the frame of homogenization, application to the typical porous geomaterials with transversely isotropic matrix such as clay rocks is presented to illustrate the impact of the concavity parameter and the matrix anisotropy on overall properties through several micromechanical homogenization schemes such as non-interaction approximation, Mori-Tanaka-Benveniste scheme and Maxwell scheme. The methodology of evaluation of the elastic and thermal properties of heterogeneous material aforementioned is proposed based on micromechanical homogenization via multiscale modeling. The overall properties of composites with regular pores are also predicted using direct finite element approaches and then compared against micromechanical modeling. The effect of microstructure is analyzed by considering periodic RVEs containing random arrangements of pores formed by transversely isotropic phases
Lucas, Iris. "Dynamique et contrôle d'un marché financier avec une approche système multi-agents". Thesis, Normandie, 2018. http://www.theses.fr/2018NORMLH39/document.
Texto completo da fonteThis thesis suggests reflection in studying financial markets through complex systems prism.First, an original mathematic description for describing agents' decision-making process in case of problems affecting by both individual and collective behavior is introduced. The proposed method is particularly applicable when studied system is characterized by non-linear, path dependent and self-organizing interactions. An application to financial markets is proposed by designing a multi¬agent system based on the proposed formalization.In this application, we propose to implement a computational agent-based financial market in which the system is described in both a microscopie and macroscopic levels are proposed. The agents' decision-making process is based on fuzzy logic rules and the price dynamic is purely deten-ninistic according to the basis matching rules of a central order book as in NYSE-Euronext-Paris. We show that, while putting most parameters under evolutionary control, the computational agent- based system is able to replicate several stylized facts of financial time series (distributions of stocks returns showing a heavy tau l with positive excess kurtosis and volatility clustering phenomenon).Thereafter, with numerical simulations we propose to study three system's properties: self-organization, resilience and robustness. First a method is introduced to quantify the degree of selforganization which ernerges in the system and shows that the capacity of self-organization is maximized when the agents' behaviors are heterogeneous. Secondly, we propose to study the system's response when market shock is simulated. in both cases, numerical results are presentedI and analyzed, showing how the global market behavior emerges from specific individual behavior interactions.Our results notably show that the emergence of collective herding behavior when market shock occurs leads to a temporary disruption on the system self-organization. Finaily, numerical simulations highlight that our artificial financial market can be able to absorb strong mono-shock but be lead to the rupture by low but repeated perturbations
Livros sobre o assunto "Microstructure Complexe"
R, Stevens, e Taylor Derek 1939-, eds. Complex microstructures. Stoke-on-Trent: Institute of Ceramics, 1989.
Encontre o texto completo da fonteR, Stevens, Taylor D e British Ceramic Society, eds. Complex microstructures. Shelton, U.K: Institute of Ceramics, 1989.
Encontre o texto completo da fonteBotterill, Sarah Lindsay. The electroforming of complex structures and microstructures. Birmingham: University of Birmingham, 1997.
Encontre o texto completo da fonteA, Bednarcyk Brett, e United States. National Aeronautics and Space Administration., eds. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC: National Aeronautics and Space Administration, 1997.
Encontre o texto completo da fonteA, Bednarcyk Brett, e United States. National Aeronautics and Space Administration., eds. An efficient implementation of the GMC micromechanics model for multi-phased materials with complex microstructures. [Washington, DC: National Aeronautics and Space Administration, 1997.
Encontre o texto completo da fonteGordeeva, N. D. Microstructural analysis of the execution complex motor actions: Methods and results. New Delhi: Oxonian Press, 1989.
Encontre o texto completo da fonteG, Capriz, e Mariano Paolo Maria 1966-, eds. Material substructures in complex bodies: From atomic level to continuum. Amsterdam: Elsevier, 2007.
Encontre o texto completo da fonteGordeeva, N. D. Microstructural analysis of the execution of complex motor actions: Methods and results. New Delhi: Published for the National Library of Medicine by Amerind Pub. Co. ; Springfield, Va. : Available from the U.S. Dept. of Commerce, National Technical Information Service, 1989.
Encontre o texto completo da fonteEvans, Robert. Art, science and informatics: Visualisation of large, complex data sets in high-speed measurement of the microstructure of wood. Vancouver, B.C: University of British Columbia, 2002.
Encontre o texto completo da fonteEvans, Robert. Art, science and informatics: Visualisation of large, complex data sets in high-speed measurement of the microstructure of wood. Vancouver, B.C: University of British Columbia, 2002.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Microstructure Complexe"
Lewis, Jennifer A. "Colloidal Stability in Complex Fluids". In Ceramic Microstructures, 495–501. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5393-9_48.
Texto completo da fonteTsimpli, Ianthi Maria, Lina Mukhopadhyay, Anusha Balasubramanian e Jeanine Treffers-Daller. "Chapter 4. Microstructural properties in the narrative retellings of young English learners in EMI schools in India". In Studies in Bilingualism, 68–122. Amsterdam: John Benjamins Publishing Company, 2024. http://dx.doi.org/10.1075/sibil.66.04tsi.
Texto completo da fonteWu, Meng-jen John. "Complete Waveguide Structures". In Integrated Optics, Microstructures, and Sensors, 117–41. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-2273-7_5.
Texto completo da fonteVega, Clara, e Christian S. Miller. "Market MicrostructureMarket microstructure". In Complex Systems in Finance and Econometrics, 567–79. New York, NY: Springer New York, 2009. http://dx.doi.org/10.1007/978-1-4419-7701-4_32.
Texto completo da fonteOsler, Carol. "Market Microstructure, Foreign Exchange". In Complex Systems in Finance and Econometrics, 580–614. New York, NY: Springer New York, 2009. http://dx.doi.org/10.1007/978-1-4419-7701-4_33.
Texto completo da fonteWhite, Lee F., James R. Darling, Desmond E. Moser, David A. Reinhard, Joseph Dunlop, David J. Larson, Daniel Lawrence e Isabelle Martin. "Complex Nanostructures in Shocked, Annealed, and Metamorphosed Baddeleyite Defined by Atom Probe Tomography". In Microstructural Geochronology, 351–67. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119227250.ch17.
Texto completo da fonteHolzer, Lorenz, Philip Marmet, Mathias Fingerle, Andreas Wiegmann, Matthias Neumann e Volker Schmidt. "Towards a Quantitative Understanding of Microstructure-Property Relationships". In Tortuosity and Microstructure Effects in Porous Media, 161–84. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-30477-4_5.
Texto completo da fontePorubov, Alexey V. "Essentially Nonlinear Strain Waves in Solids with Complex Internal Structure". In Mechanics of Microstructured Solids, 119–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-00911-2_13.
Texto completo da fonteSchmauder, Siegfried, e Leon Mishnaevsky. "Complex, Graded and Interpenetrating Microstructures". In Micromechanics and Nanosimulation of Metals and Composites, 213–310. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-78678-8_4.
Texto completo da fonteFaran, Eilon, e Doron Shilo. "Microstructural Effects During Crackling Noise Phenomena". In Understanding Complex Systems, 167–98. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45612-6_9.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Microstructure Complexe"
Rangarajan, Aswath, e Veera Sundararaghavan. "Design of Microstructure Response Using a Complex Step Plasticity Approach". In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39011.
Texto completo da fonteXu, Hongyi, Ruoqian Liu, Alok Choudhary e Wei Chen. "A Machine Learning-Based Design Representation Method for Designing Heterogeneous Microstructures". In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34570.
Texto completo da fonteLi, Xiaolin, Zijiang Yang, L. Catherine Brinson, Alok Choudhary, Ankit Agrawal e Wei Chen. "A Deep Adversarial Learning Methodology for Designing Microstructural Material Systems". In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85633.
Texto completo da fonteWu, Yulun, e Yumeng Li. "How to Encode Microstructure in Machine Learning: A Comparison Study". In ASME 2023 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/detc2023-116704.
Texto completo da fonteHenrich, Manuel, Michael Dölz e Sebastian Münstermann. "Development of a Numerical Framework for Microstructure Sensitive Fatigue Life Investigations". In ASME 2023 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/pvp2023-106419.
Texto completo da fonteLi, Jizhan, Zhichao Fan, Tao Chen e Yu Zhou. "Mechanism of High Temperature Stability on Microstructures of 25Cr35NiNb Alloy Prepared by Laser Additive Manufacturing". In ASME 2022 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/pvp2022-84663.
Texto completo da fonteBonacuse, Peter J., Subodh Mital e Robert Goldberg. "Characterization of the As Manufactured Variability in a CVI SiC/SiC Woven Composite". In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45890.
Texto completo da fonteJiang, Quanxin, V. M. Bertolo, V. A. Popovich e Carey L. Walters. "Recent Developments and Challenges of Cleavage Fracture Modelling in Steels: Aspects on Microstructural Mechanics and Local Approach Methods". In ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-95464.
Texto completo da fonteStalheim, Douglas, Andrew Slifka, Pello Uranga, Dong-Hoon Kang e Enrico Lucon. "Cross-Sectional Grain Size Homogeneity Effect on Structural Steel Fatigue Performance in Air and Hydrogen Environments". In 2020 13th International Pipeline Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/ipc2020-9404.
Texto completo da fonteSahoo, Seshadev, e Kevin Chou. "Review on Phase-Field Modeling of Microstructure Evolutions: Application to Electron Beam Additive Manufacturing". In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-3901.
Texto completo da fonteRelatórios de organizações sobre o assunto "Microstructure Complexe"
Daniel. L52353 Materials Selection, Welding and Weld Monitoring - Optimized Welding Solutions for X100 Line Pipe. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), abril de 2012. http://dx.doi.org/10.55274/r0010650.
Texto completo da fonteMiller, Gregory H., e Gregory Forest. Modeling and Algorithmic Approaches to Constitutively-Complex, Microstructured Fluids. Office of Scientific and Technical Information (OSTI), maio de 2014. http://dx.doi.org/10.2172/1150221.
Texto completo da fonteDiaz de la Rubia, T, M. J. Caturla e M. J. Fluss. Dimensional Stability and Microstructure Evolution in Irradiated Systems with Complex Kinetics. Office of Scientific and Technical Information (OSTI), abril de 2003. http://dx.doi.org/10.2172/15007305.
Texto completo da fonteDiaz de la Rubia, T., M. Caturla e M. J. Fluss. Dimensional Stability and Microstructure Evolution in Irradiated Systems with Complex Kinetics. Office of Scientific and Technical Information (OSTI), outubro de 1999. http://dx.doi.org/10.2172/793932.
Texto completo da fonteDinovitzer, Aaron. PR-214-144500-R01 Weld Hydrogen Cracking Susceptibility Characterization. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), março de 2016. http://dx.doi.org/10.55274/r0010924.
Texto completo da fonteDinovitzer, Aaron, Morvarid Ghovanlou e Nick Pussegoda (Archived). PR-214-123734-R01 In The Ditch Non-Destructive Mechanical Property Measurement. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), abril de 2016. http://dx.doi.org/10.55274/r0011019.
Texto completo da fontePatchett, B. M., e A. C. Bicknell. L51706 Higher-Strength SMAW Filler Metals. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), dezembro de 1993. http://dx.doi.org/10.55274/r0010418.
Texto completo da fonteJung. L52232 Weld Metal Cooling Rate Prediction of Narrow Groove Pipeline Girth Welds FEA Modeling. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), janeiro de 2008. http://dx.doi.org/10.55274/r0011321.
Texto completo da fonteHoelzer, David T., Rachel Seibert e Caleb Massey. Complete Status Report Documenting the Processing, Microstructure and High-Temperature Mechanical Properties of the Nanostructured Ferritic Alloy OFRAC. Office of Scientific and Technical Information (OSTI), junho de 2019. http://dx.doi.org/10.2172/1550736.
Texto completo da fonteWeertman, J. R. Use of anomalous small angle x-ray scattering to investigate microstructural features in complex alloys. Office of Scientific and Technical Information (OSTI), agosto de 1988. http://dx.doi.org/10.2172/5934503.
Texto completo da fonte