Literatura científica selecionada sobre o tema "Microstructure and crystal texture characterization"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Microstructure and crystal texture characterization".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Microstructure and crystal texture characterization"
Zhang, Kai, Knut Marthinsen, Bjørn Holmedal, Jesper Friis, Tanja Pettersen e Antonio Segatori. "Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-Extrusions". Materials Science Forum 879 (novembro de 2016): 1239–44. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1239.
Texto completo da fonteRahmayeni, Syukri Arief, Yeni Stiadi e Herlin Oktavani. "PEMBUATAN DAN KARAKTERISASI NANOKOMPOSIT MFe2O4 DAN MFe2O4-SiO2 (M = Cu, Ni)". Jurnal Riset Kimia 4, n.º 1 (11 de fevereiro de 2015): 55. http://dx.doi.org/10.25077/jrk.v4i1.84.
Texto completo da fonteRauch, Johannes, Frank Kern e Rainer Gadow. "Polarization Light Optical Texture Analysis for the Structural Characterization of CIM Components". Advances in Science and Technology 45 (outubro de 2006): 1690–95. http://dx.doi.org/10.4028/www.scientific.net/ast.45.1690.
Texto completo da fonteViney, Christopher, e Wendy S. Putnam. "Characterization of sheared liquid crystalline polymers by light microscopy". Proceedings, annual meeting, Electron Microscopy Society of America 51 (1 de agosto de 1993): 864–65. http://dx.doi.org/10.1017/s0424820100150150.
Texto completo da fonteChaudry, Umer Masood, Kotiba Hamad e Tea-Sung Jun. "Investigating the Microstructure, Crystallographic Texture and Mechanical Behavior of Hot-Rolled Pure Mg and Mg-2Al-1Zn-1Ca Alloy". Crystals 12, n.º 10 (21 de setembro de 2022): 1330. http://dx.doi.org/10.3390/cryst12101330.
Texto completo da fonteZhang, Miao, e Shujie Liu. "Microstructure of laser cladding nickel-based superalloy: characterization, finite element modeling, and fatigue analysis". Journal of Physics: Conference Series 2184, n.º 1 (1 de março de 2022): 012047. http://dx.doi.org/10.1088/1742-6596/2184/1/012047.
Texto completo da fonteBlack, David R. "Microstructural characterization using x-ray diffraction imaging". Proceedings, annual meeting, Electron Microscopy Society of America 51 (1 de agosto de 1993): 504–5. http://dx.doi.org/10.1017/s0424820100148356.
Texto completo da fonteDiMasi, E., e M. Sarikaya. "Synchrotron x-ray microbeam diffraction from abalone shell". Journal of Materials Research 19, n.º 5 (maio de 2004): 1471–76. http://dx.doi.org/10.1557/jmr.2004.0196.
Texto completo da fonteClaves, Steven R., Wojciech Z. Misiolek, William H. Van Geertruyden e David B. Williams. "Use of Electron Backscatter Diffraction Technique in Characterization of 6XXX Aluminum Alloy Extrusions". Microscopy and Microanalysis 6, S2 (agosto de 2000): 954–55. http://dx.doi.org/10.1017/s1431927600037260.
Texto completo da fonteHabibi, Niloufar, Napat Vajragupta e Sebastian Münstermann. "Deformation and Damage Assessments of Two DP1000 Steels Using a Micromechanical Modelling Method". Crystals 11, n.º 7 (10 de julho de 2021): 805. http://dx.doi.org/10.3390/cryst11070805.
Texto completo da fonteTeses / dissertações sobre o assunto "Microstructure and crystal texture characterization"
Khabouchi, Amal. "Microstructure, texture et propagation des ondes ultrasonores dans un superalliage à base de nickel fait par fabrication additive". Electronic Thesis or Diss., Université de Lorraine, 2021. https://docnum.univ-lorraine.fr/public/DDOC_T_2021_0349_KHABOUCHI.pdf.
Texto completo da fonteAdditive Manufacturing is a revolutionary industrial technique that has attracted increasing interest since the late 1980s and is gradually beginning to replace conventional manufacturing processes, and even to open horizons for the creation of new types of materials. This importance is attributed to it thanks to several specificities, namely the almost infinite possibility of building parts with complex geometries and the possibility of mixing several types of powders with different chemical compositions to obtain materials with well-defined properties depending on the final applications. These materials are often referred to as functionally graded materials. Additive manufacturing is even used to build composite materials. It is now used in almost all industrial fields: aerospace, medical, automotive and electronic components. The extension of additive manufacturing to metal alloys is even more recent. Over the past 20 years, many metal additive manufacturing processes have been developed. Examples include laser powder bed fusion (called SLM or L-PBF), direct additive laser construction (CLAD), selective laser sintering (SLS), etc... Although that it is a very promising technique, additive manufacturing, especially the metallic one, is still poorly controlled. Considerable technological work has been done to optimise the manufacturing parameters and improve the properties, particularly mechanical ones, of the parts produced. However, to fully use the advantages of the technique, a major research effort remains to be made to fully understand and control the fine mechanisms involved in the processes. As a result, the scientific community is currently very active in this field and the publications are very numerous. From a metallurgical point of view, two points seem to be important for the mechanical strength of the parts. On one hand, the presence of porosities, in a greater or lesser proportion, in the deposited material, which can le ad to a decrease in its resistance. On the other hand, the crystalline texturing inherent in the process used, which results in an anisotropic mechanical behaviour. The work of this thesis is in this context. It was conducted as part of a collaboration between the LEM3 in Metz and CEA-LIST in Saclay, integrated within a wider program of research and innovation joining CEA-Tech Lorraine and the Region of Lorraine. The CEA-LIST is specialized -among other things- in the development of non-destructive control methods (NDT) to detect the presence of defects in metal parts. LEM3 has particular competence in quantifying and understanding the crystalline textures of metal alloys related to their elaboration conditions. From a scientific point of view, the objectives of the thesis were twofold: on the one hand, our objective was to improve our understanding of the genesis of crystalline textures during the deposit of a metal alloy by SLM; On the other hand, we aim to evaluate the consequenc es of these textures on the propagation of the ultrasound waves which are traditionally used in CND. From a more practical point of view, the question that arose at the beginning of the thesis was: does the elastic anisotropy of propagation of ultrasound linked to the crystalline texturing produced by the SLM process require a review of the protocol of non-destructive control by ultrasound?
Mandal, Sudipto. "Texture and Microstructure in Two-Phase Titanium Alloys". Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1024.
Texto completo da fonteBrunet, Frédéric. "Texture et microstructure de films de diamant : effet du dopage au bore". Université Joseph Fourier (Grenoble ; 1971-2015), 1997. http://www.theses.fr/1997GRE10176.
Texto completo da fonteBastos, da Silva Fanta Alice. "Characterization of the microstructure, grain boundaries and texture of nanostructured electrodeposited CoNi by use of electron backscatter diffraction (EBSD)". Göttingen Cuvillier, 2007. http://d-nb.info/991032845/04.
Texto completo da fonteBastos, da Silva Fanta Alice. "Characterization of the microstructure, grain boundaries and texture of nanostructured electrodeposited CoNi by use of Electron Backscatter Diffraction (EBSD) /". Göttingen : Cuvillier, 2008. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=017078787&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Texto completo da fonteNiyonzima, Jean de dieu. "Topological defects in smectic A liquid crystal thin films". Electronic Thesis or Diss., Sorbonne université, 2023. https://accesdistant.sorbonne-universite.fr/login?url=https://theses-intra.sorbonne-universite.fr/2023SORUS660.pdf.
Texto completo da fonteDue to their ubiquitous and versatile nature, the topological defects have been the subject of a great interest for over a century in different research areas such as cosmology, biology and condensed matter physics. They are important in the determination of dynamic and static properties of the material that host them. Smectic A liquid crystal topological defects have been shown to be able to attract, trap and orient nanoparticle into different networks in their defect cores. However, their intimate structure remains elusive. Liquid crystals are laboratory systems to study topological defects. The confined smectic liquid crystal thin films that can lead to the formation of topological defects are useful since they allow for the use of X-ray scattering to study the defects at an unprecedented resolution. Using Grazing Incident Small-Angle X-ray Scattering (GISAXS) on the SIXS beamline of Soleil Synchrotron facility, we studied the internal structure of an array of oriented smectic topological defects in thin smectic-A liquid crystal films of of 4-n-octyl-4’-cyanobiphenyl (8CB) confined between two strong antagonistic anchoring imposed by Polyvinyl alcohol substrate (planar unidirectional) and air (homeotropic). We studied a film of 180 nm thickness and found that it is composed of smectic layers superimposed into flattened hemicylinders. We have theoretically determined the relationship between the integrated Bragg intensity, the Full width at Half maximum of the scattered peak and the number of scattering rotating smectic layers. This allowed us to reconstruct with precision the internal structure of these thin smectic films. We have evidenced that three different kinds of topological defects coexist inside these thin smectic films, dislocations, disclination and 2D topological grain boundaries, all oriented in the direction parallel to the axis of the hemicylinders. The rotating smectic layers that connect these defects display an unusually strong increase of their interlayer spacing close to the hemicylinder curvature center. A minimization of the elastic energy leads to a quantitative relationship between the interlayer spacing and the curvature radius of the smectic layers in perfect agreement with the experimental data. This interlayer spacing appears to be not only at the origin of the dislocation formation but also at the origin of a chevron formation in the middle of the hemicylinders. We have then analyzed the evolution of the structures as a function of the film thickness. We found that it is essentially the disinclination zone that manages the change in structure as the thickness increases due to the need to decrease the surface energy of the smectic film. This allowed us to show in particular how the size of the disclination core can be controlled by the thickness of the smectic film
Chen, Zhe. "Relation microstructure et propriété mécanique des films de ZrO2 obtenus par MOCVD". Phd thesis, Université Paris Sud - Paris XI, 2011. http://tel.archives-ouvertes.fr/tel-00637177.
Texto completo da fonteBernier, Jeremy Scott. "Evolution and Characterization of Partially Stabilized Zirconia (7wt% Y2O3) Thermal Barrier Coatings Deposited by Electron Beam Physical Vapor Deposition". Digital WPI, 2002. https://digitalcommons.wpi.edu/etd-theses/826.
Texto completo da fonteBarrat, Sylvère. "Caractérisations morphologiques, chimiques, et structurales de cristaux et films de diamant élaborés par un procédé de dépôt chimique en phase vapeur assisté par plasma micro-onde". Vandoeuvre-les-Nancy, INPL, 1994. http://docnum.univ-lorraine.fr/public/INPL_T_1994_BARRAT_S.pdf.
Texto completo da fonteMissaoui, Amine. "Dynamics of topological defects in freely floating smectic liquid crystal films and bubbles". Electronic Thesis or Diss., Sorbonne université, 2021. http://www.theses.fr/2021SORUS207.
Texto completo da fonteThe aim of the thesis is to study the dynamics of topological defects in liquid crystals (LC). Among the wide range of possible choices, we are interested in the thermotropic smectic-C liquid crystalline phase. The unique property of this LC phase allows to form freely suspended films, that are supported on a holder and bounded by a meniscus, and freely floating bubbles. The studies in these suspended systems are on the one hand less influenced by the boundary conditions that exist in the case of the LC cells and on the other hand easier to interpret thanks to the two-dimensional geometry of these films and bubbles. The aim of the PhD consists in exploiting the properties of smectique-C freely suspended films and bubbles for the study of the dynamics of topological defects
Livros sobre o assunto "Microstructure and crystal texture characterization"
Novikov, V. I͡U. Grain growth and control of microstructure and texture in polycrystalline materials. Boca Raton: CRC Press, 1997.
Encontre o texto completo da fonteZhu, Xingwen. ZnO bao mo zhi bei ji qi guang, dian xing neng yan jiu. 8a ed. Shanghai Shi: Shanghai da xue chu ban she, 2010.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Microstructure and crystal texture characterization"
Van Houtte, Paul. "Crystal Plasticity Based Modelling of Deformation Textures". In Microstructure and Texture in Steels, 209–24. London: Springer London, 2009. http://dx.doi.org/10.1007/978-1-84882-454-6_12.
Texto completo da fonteRollett, Anthony D., Sukbin Lee e Ricardo A. Lebensohn. "3D Image-Based Viscoplastic Response with Crystal Plasticity". In Microstructure and Texture in Steels, 255–64. London: Springer London, 2009. http://dx.doi.org/10.1007/978-1-84882-454-6_15.
Texto completo da fonteArenz, Uwe, e Eckhardt Schneider. "Microstructure and Texture Influences on Ultrasonic Quantities for Welding Stress Analysis". In Nondestructive Characterization of Materials VIII, 653–58. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-4847-8_102.
Texto completo da fonteChadha, K., P. P. Bhattacharjee e M. Jahazi. "The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys". In Characterization of Minerals, Metals, and Materials 2015, 107–14. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-48191-3_13.
Texto completo da fonteBaroghel-Bouny, Véronique, e Thierry Chaussadent. "Texture and Moisture Characterization of Hardened Cement Pastes and Concretes from Water Vapour Sorption Measurements". In The Modelling of Microstructure and its Potential for Studying Transport Properties and Durability, 241–55. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-015-8646-7_11.
Texto completo da fonteIshida, Naoki, Daisuke Terada, Keizo Kashihara e Nobuhiro Tsuji. "Evolution of Microstructure and Texture of Pure Al Single Crystal Having {112}<110> Orientation during Severe Plastic Deformation". In Advanced Materials Research, 405–8. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.405.
Texto completo da fonteVizcaino, Pablo, Alejandra V. Flores, Miguel A. Vicente Alvarez, Javier R. Santisteban, Gladys Domizzi, Alfredo Tolley, Adriana Condó e Jonathan D. Almer. "Characterization of Hydrides and the α-Zr Matrix in Zirconium Alloys: Effects of Stresses, Microstructure, and Neutron Irradiation on Hydride Texture, Terminal Solid Solubility, and Dislocation Structure". In Zirconium in the Nuclear Industry: 19th International Symposium, 786–811. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2021. http://dx.doi.org/10.1520/stp162220190019.
Texto completo da fonteAraceli, SALAZAR-PERALTA, PICHARDO-SALAZAR José Alfredo, SÁNCHEZ-OROZCO Raymundo e PICHARDO-SALAZAR Ulises. "Introduction to Metallographic Study". In Handbook Science of Technology and Innovation, 106–29. ECORFAN, 2022. http://dx.doi.org/10.35429/h.2022.3.106.129.
Texto completo da fonteRaabe, Dierk. "Texture–Property Relationships in Aluminum Alloys: Simulations and Experiments". In Encyclopedia of Aluminum and Its Alloys. Boca Raton: CRC Press, 2019. http://dx.doi.org/10.1201/9781351045636-140000443.
Texto completo da fonteLÓPEZ, Roberto, Jesús NAMIGTLE e Jorge MASTACHE. "Structural characterisation of copper oxide by X-ray diffraction". In Handbooks Engineering Science and Technology TIX, 70–96. ECORFAN, 2021. http://dx.doi.org/10.35429/h.2021.9.1.70.96.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Microstructure and crystal texture characterization"
KAVOUSI, Majid. "Cellular automata and crystal plasticity modelling for metal additive manufacturing". In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-267.
Texto completo da fonteMISHRA, BIDYAPATI, B. RAMAKRISHNA, K. SIVA KUMAR e V. MADHU. "High Strain Rate Deformation Behavior of Materials: Effect of Crystal Structure, Grain Size, Microstructure and Texture". In 31st International Symposium on Ballistics. Lancaster, PA: DEStech Publications, Inc., 2019. http://dx.doi.org/10.12783/ballistics2019/33215.
Texto completo da fonteParasız, Sunal Ahmet, Brad L. Kinsey, Neil Krishnan e Jian Cao. "Characterization and Investigation of Deformation During Microextrusion Using X-Ray Texture Analyses". In ASME 2007 International Manufacturing Science and Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/msec2007-31107.
Texto completo da fonteMa, Xianfeng, Kan Ma e Yawen Wu. "Crystal Plasticity Modeling of Hot Extrusion Texture and Plasticity in a Titanium Alloy for an ICME Toolset". In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-67989.
Texto completo da fonteWang, Zhiyu, Christopher Saldana e Saurabh Basu. "Subsurface Microstructure and Crystallographic Texture in Surface Severe Plastic Deformation Processes". In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2915.
Texto completo da fonteZhao, Man, e Steven Y. Liang. "Modeling of Residual Stress in Micro-Grinding Considering Texture Effect". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69724.
Texto completo da fonteHANON, Guillaume. "Heterogeneity of strain and texture inside roll-bonded multilaminates". In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-191.
Texto completo da fonteGong, Xibing, Xiaoqing Wang, Vernon Cole, Zachary Jones, Kenneth Cooper e Kevin Chou. "Characterization of Microstructure and Mechanical Property of Inconel 718 From Selective Laser Melting". In ASME 2015 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/msec2015-9317.
Texto completo da fonteXiong, Zhen, Yingbin Zhang, Shaoyong Fu, Zhiqiang Zhang, Guanchao Xu, Zhiqiang Feng, Junhao Chu e Pierre J. Verlinden. "Crystal growth, microstructure characterization and cell performance analysis of casting-monocrystalline ingots with <111> orientation". In 2014 IEEE 40th Photovoltaic Specialists Conference (PVSC). IEEE, 2014. http://dx.doi.org/10.1109/pvsc.2014.6925574.
Texto completo da fonteSatoh, Gen, Y. Lawrence Yao, Xu Huang e Ainissa Ramirez. "Characterization and Prediction of Texture in Laser Annealed NiTi Shape Memory Thin Films". In ASME 2010 International Manufacturing Science and Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/msec2010-34250.
Texto completo da fonte