Livros sobre o tema "Microstructural and mechanical characterizations"

Center, Lewis Research, ed. Tensile properties and microstructural characterization of Hi-Nicalon SiC/RBSN composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

Singh, Jag J. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. [Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1997.

H, Pater Ruth, Eftekhari Abe e Langley Research Center, eds. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

Singh, Jag J. Microstructural characterization of semi-interpenetrating polymer networks by positron lifetime spectroscopy. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1996.

Bansal, Narottam P. Microstructural, chemical and mechanical characterization of polymer-derived Hi-Nicalon fibers with surface coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

Bansal, Narottam P. Microstructural, chemical and mechanical characterization of polymer-derived Hi-Nicalon fibers with surface coatings. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

Antonio, Brian Kent. Material and mechanical characterizations for braided composite pressure vessels. Springfield, Va: Available from the National Technical Information Service, 1990.

A, DiCarlo James, e NASA Glenn Research Center, eds. Thermomechanical characterization of SiC fiber tows and implications for CMC. [Cleveland, Ohio]: National Aeronautics and Space Administration, Glenn Research Center, 1999.

McHale, Paul F. Factors influencing the microstructural and mechanical properties of ULCB steel weldments. Monterey, Calif: Naval Postgraduate School, 1991.

Clark, Elizabeth J. Molecular and microstructural factors affecting mechanical properties of polymeric cover plate materials. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1985.

Bayliss, Roger W. The sintering, microstructural analysis and mechanical properties of two beta MgSiAlON ceramics. [s.l.]: typescript, 1986.

Kvaratskheliya, Varvara A. A study of microstructural changes in synthetic fibres resulting from mechanical deformations. Leicester: De Montfort University, 2001.

Aloulou, Wiem. Modeling the mechanical response of concrete in relation to its microstructural characteristics. Ottawa: National Library of Canada, 1993.

Ketchion, Stephen Martin. The processing, microstructural evaluation and mechanical properties of SiC dispersoid reinforced Si3N4 composites. [s.l.]: typescript, 1992.

J, Petit, ed. JFMSS-6: Microstructural design for improved mechanical behaviour of advanced materials : Poitiers, France, October 4-6, 1999. Les Ulis, France: EDP Sciences, 2000.

Japan-France Materials Science Seminar (6th 1999 Poitiers, France). JFMSS-6: Microstructural design for improved mechanical behaviour of advanced materials, Poitiers, France, October 4-6, 1999. Les Ulis, France: EDP Sciences, 2000.

Japan-France Materials Science Seminar (6th 1999 Poitiers, France). JFMSS-6: Microstructural design for improved mechanical behaviour of advanced materials, Poitiers, France, October 4-6, 1999. Les Ulis, France: EDP Sciences, 2000.

A, Neĭmark L., Argonne National Laboratory e U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research., eds. Results of mechanical tests and supplementary microstructural examinations of the TMI-2 lower head samples. Washington, D.C: Division of Systems Research, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1994.

I, Haque, American Society of Mechanical Engineers. Materials Division., ASME/COE e Symposium on Friction and Material Characterisations (1988 : Chicago, Ill.), eds. Friction and material characterizations: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Chicago, Illinois, November 27-December 2, 1988. New York, N.Y. (345 E. 47th St., New York 10017): ASME, 1988.

J, Birt M., e Langley Research Center, eds. Characterization of Al-Cu-Li alloy 2090 near net shape extrusion. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.

Blackwell, Paul Leslie. Mechanical property, microstructural and textural development during the high temperature, slow strain rate deformation of Al-Li-Cu-Mg-Zr alloy, AA8090. Birmingham: University of Birmingham, 1995.

American Society of Mechanical Engineers. Winter Meeting. Microstructural evolution in metal processing: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Dallas, Texas, November 25-30, 1990. New York, N.Y: The Society, 1990.

American Society of Mechanical Engineers. Winter Meeting. Microstructural development and control in materials processing: Presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, San Francisco, California, December 10-15, 1989. New York, N.Y: The Society, 1989.

Meeting, American Society of Mechanical Engineers Winter. Friction and material characterizations: Presented at the winter annual meeting of the American Society of Mechanical Engineers, Chicago, Ill., November 27-December 2, 1988 ; sponsored by the Materials Division, ASME, the Council of Engineering, ASME. New York: The American Society of Mechanical Engineers, 1988.

Microstructural and Mechanical Characterization of Alloys. MDPI, 2021. http://dx.doi.org/10.3390/books978-3-03943-756-6.

Mickelberry, Kenneth D. Microstructural characterization of HSLA-100 GMA-weldments. 1987.

Potkay, Gary P. Microstructural characterization of the heat affected zone of HSLA-100 steel GMA-weldment. 1987.

National Aeronautics and Space Administration (NASA) Staff. Microstructural and Mechanical Property Characterization of Shear Formed Aerospace Aluminum Alloys. Independently Published, 2018.

National Aeronautics and Space Administration (NASA) Staff. Mechanical, Chemical and Microstructural Characterization of Monazite-Coated Silicon Carbide Fibers. Independently Published, 2018.

Thompson, Jeffrey Yates. Characterization of mechanical behavior based on microstructural phenomena in Li2O.2SiO2 glass-ceramics. 1995.

Liu, Xuesheng, Yunliang Tan, Yunhao Wu e Xuebin Li, eds. Microstructure, Characterization and Mechanical Properties of Coal and Coal-Like Materials. MDPI, 2023. http://dx.doi.org/10.3390/books978-3-0365-7550-6.

Liaw, Peter K., e Jamieson Brechtl. Mechanical, Microstructural, and Irradiation Response of Multiprinciple Alloy Systems. Springer International Publishing AG, 2021.

Mechanical and Microstructural Effects in Fretting Fatigue of Ti-6Al-4V. Storming Media, 2000.

Kansal, Utkarsh. Microstructural banding in thermally and mechanically processed titanium 6242. 1992.

Yang, Hong. Effects of starch on rheological, microstructural, and color properties of surimi-starch gels. 1997.

Ren, Binyan. Mechanical and microstructural characteristics of an Al-Li-Cu-Zr alloy during superplastic deformation. 1991.

Salimijazi, Hamidreza. Microstructural development and mechanical properties of the vacuum plasma sprayed titanium-aluminum-vanadium alloy. 2005.

Adetunji, Gbadegesin James. Microstructural control and high temperature mechanical property of ferritic/martensitic steels for nuclear reactor application. 1988.

JFMSS-6: Microstructural design for improved mechanical behaviour of advanced materials : Poitiers, France, October 4-6, 1999 (Journal de physique). EDP Sciences, 2000.

Johnson, Garry W. E., e R. Jr Kanne W. Metallographic Characterization of Metals After Welding, Processing and Service: Proceedings of the Twenty Fifth Annual Technical Meeting of the Int (Microstructural Science). American Society of Civil Engineers, 1993.

Kelleher, Maura. Preparation of metal oxide additive particles via mechanical methods and their influence on subsequent fabrication, microstructural and electical properties of commercial ZnO varistors. 2003.

Baba, Nor Bahiyah, Mohd Mustafa Al Bakri Abdullah, Mohd Najib Muhamed, Faizul Che Pa, Rabiatul Manisah Mohamed e Muhammad Faheem Mohd Tahir. ENGINEERING MATERIALS FOR TECHNOLOGISTS. 2024^a ed. PENERBIT UNIVERSITI MALAYSIA PERLIS, 2024. http://dx.doi.org/10.58915/bk2023.016.