Siga este link para ver outros tipos de publicações sobre o tema: Micropolar fluids equations.
Artigos de revistas sobre o tema "Micropolar fluids equations"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Micropolar fluids equations".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
1
Stamenkovic, Zivojin, Milos Kocic, Jasmina Bogdanovic-Jovanovic e Jelena Petrovic. "Nano and micropolar MHD fluid flow and heat transfer in inclined channel". Thermal Science, n.º 00 (2023): 170. http://dx.doi.org/10.2298/tsci230515170k.
Texto completo da fonteResumo:
Magnetohydrodynamic (MHD) fluid flows attract a lot of attention in the extrusion of polymers, in the theory of nanofluids, as well as in the consideration of biological fluids. The considered problem in the paper is the flow and heat transfer of nano and micropolar fluid in inclined channel. Fluid flow is steady, while nano and micropolar fluids are incompressible, immiscible, and electrically conductive. The upper and lower channel plates are electrically insulated and maintained at constant and different temperatures. External applied magnetic field is perpendicular to the fluid flow and considered problem is in induction-less approximation. The equations of the considered problem are reduced to ordinary differential equations, which are analytically solved in closed form. The influence of characteristics parameters of nano and micropolar fluids on velocity, micro-rotation and temperature fields are graphically shown and discussed. The general conclusions given through the analysis of graphs can be used for better understanding of the flow and heat transfer of nano and micropolar fluid, which have a great practical application. Fluids with nanoparticles innovated the modern era, due to their comprehensive applications in nanotechnology and manufacturing processes, while the theory of micropolar fluids explains the flow of biological fluids and various types of liquid metals and crystals.
2
Kocić, Miloš, Živojin Stamenković, Jelena Petrović e Jasmina Bogdanović-Jovanović. "Control of MHD Flow and Heat Transfer of a Micropolar Fluid through Porous Media in a Horizontal Channel". Fluids 8, n.º 3 (8 de março de 2023): 93. http://dx.doi.org/10.3390/fluids8030093.
Texto completo da fonteResumo:
The problem considered in this paper is a steady micropolar fluid flow in porous media between two plates. This model can be used to describe the flow of some types of fluids with microstructures, such as human and animal blood, muddy water, colloidal fluids, lubricants and chemical suspensions. Fluid flow is a consequence of the constant pressure gradient along the flow, while two parallel plates are fixed and have different constant temperatures during the fluid flow. Perpendicular to the flow, an external magnetic field is applied. General equations of the problem are reduced to ordinary differential equations and solved in the closed form. Solutions for velocity, microrotation and temperature are used to explain the influence of the external magnetic field (Hartmann number), the characteristics of the micropolar fluid (coupling and spin gradient viscosity parameter) and the characteristics of the porous medium (porous parameter) using graphs. The results obtained in the paper show that the increase in the additional viscosity of micropolar fluids emphasizes the microrotation vector. Moreover, the analysis of the effect of the porosity parameter shows how the permeability of a porous medium can influence the fluid flow and heat transfer of a micropolar fluid. Finally, it is shown that the influence of the external magnetic field reduces the characteristics of micropolar fluids and tends to reduce the velocity field and make it uniform along the cross-section of the channel.
3
Yang, Hujun, Xiaoling Han e Caidi Zhao. "Homogenization of Trajectory Statistical Solutions for the 3D Incompressible Micropolar Fluids with Rapidly Oscillating Terms". Mathematics 10, n.º 14 (15 de julho de 2022): 2469. http://dx.doi.org/10.3390/math10142469.
Texto completo da fonteResumo:
This article studies the 3D incompressible micropolar fluids with rapidly oscillating terms. The authors prove that the trajectory statistical solutions of the oscillating fluids converge to that of the homogenized fluids provided that the oscillating external force and angular momentum possess some weak homogenization. The results obtained indicate that the trajectory statistical information of the 3D incompressible micropolar fluids has a certain homogenization effect with respect to spatial variables. In addition, our approach is also valid for a broad class of evolutionary equations displaying the property of global existence of weak solutions without a known result of global uniqueness, including some model hydrodynamic equations, MHD equations and non-Newtonian fluids equations.
4
Rahman, M. M., e T. Sultana. "Radiative Heat Transfer Flow of Micropolar Fluid with Variable Heat Flux in a Porous Medium". Nonlinear Analysis: Modelling and Control 13, n.º 1 (25 de janeiro de 2008): 71–87. http://dx.doi.org/10.15388/na.2008.13.1.14590.
Texto completo da fonteResumo:
A two-dimensional steady convective flow of a micropolar fluid past a vertical porous flat plate in the presence of radiation with variable heat flux has been analyzed numerically. Using Darcy-Forchheimer model the corresponding momentum, microrotation and energy equations have been solved numerically. The local similarity solutions for the flow, microrotation and heat transfer characteristics are illustrated graphically for various material parameters. The effects of the pertinent parameters on the local skin friction coefficient, plate couple stress and the heat transfer are also calculated. It was shown that large Darcy parameter leads to decrease the velocity while it increases the angular velocity as well as temperature of the micropolar fluids. The rate of heat transfer in weakly concentrated micropolar fluids is higher than strongly concentrated micropolar fluids.
5
Chen, James, James D. Lee e Chunlei Liang. "Constitutive equations of Micropolar electromagnetic fluids". Journal of Non-Newtonian Fluid Mechanics 166, n.º 14-15 (agosto de 2011): 867–74. http://dx.doi.org/10.1016/j.jnnfm.2011.05.004.
Texto completo da fonte
6
IDO, Yasushi. "Basic Equations of Micropolar Magnetic Fluids". Transactions of the Japan Society of Mechanical Engineers Series B 70, n.º 696 (2004): 2065–70. http://dx.doi.org/10.1299/kikaib.70.2065.
Texto completo da fonte
7
Duarte-Leiva, Cristian, Sebastián Lorca e Exequiel Mallea-Zepeda. "A 3D Non-Stationary Micropolar Fluids Equations with Navier Slip Boundary Conditions". Symmetry 13, n.º 8 (26 de julho de 2021): 1348. http://dx.doi.org/10.3390/sym13081348.
Texto completo da fonteResumo:
Micropolar fluids are fluids with microstructure and belong to a class of fluids with asymmetric stress tensor that called Polar fluids, and include, as a special case, the well-established Navier–Stokes model. In this work we study a 3D micropolar fluids model with Navier boundary conditions without friction for the velocity field and homogeneous Dirichlet boundary conditions for the angular velocity. Using the Galerkin method, we prove the existence of weak solutions and establish a Prodi–Serrin regularity type result which allow us to obtain global-in-time strong solutions at finite time.
8
Kocić, Miloš, Živojin Stamenković, Jelena Petrović e Jasmina Bogdanović-Jovanović. "MHD micropolar fluid flow in porous media". Advances in Mechanical Engineering 15, n.º 6 (junho de 2023): 168781322311784. http://dx.doi.org/10.1177/16878132231178436.
Texto completo da fonteResumo:
The analysis of mass and heat transfer in magnetohydrodynamic (MHD) flows has significant applications in heat exchangers, cooling nuclear reactors, designing energy systems and casting and injection processes of different types of fluids. On the other hand, extraction of crude oil, the flow of human or animal blood, as well as other polymer fluids or liquid crystals are just some examples of micropolar fluid flows. Due to the broad application spectrum of the theory of micropolar fluid flows, and the significance the impact the external magnetic field has on the flow of these fluids, this paper considers the stationary flow of a micropolar fluid between two plates under the influence of an external magnetic field which is perpendicular to the direction of the flow. Stationary plates are maintained at constant and different temperatures, while the whole problem is considered in the non-inductive approximation. The equation system used to define the physical problem under consideration is reduced to the system of differential equations that have been solved analytically and the solutions of which are of general nature. In addition to the solutions for velocity, microrotation and temperature, the paper gives solutions for shear stress at plates, the Nusselt number and flow rate. The provided solutions have been applied in order to reach some general conclusions about the influence of the magnetic field and physical characteristics of a micropolar fluid and the characteristics of porous media on the nature of micropolar fluid flows in porous media by means of chart analysis. General conclusions, obtained in the result analysis in this paper, give us the opportunity to understand the flows of micropolar fluids and highlight their significance.
9
Hassanien, I. A. "Mixed Convection in Micropolar Boundary-Layer Flow Over a Horizontal Semi-Infinite Plate". Journal of Fluids Engineering 118, n.º 4 (1 de dezembro de 1996): 833–38. http://dx.doi.org/10.1115/1.2835517.
Texto completo da fonteResumo:
A boundary layer analysis is presented to study the effects of buoyancy-induced streamwise pressure gradients on laminar forced convection heat transfer to micropolar fluids from a horizontal semi-infinite flat plate. The transformed boundary-layer equations have been solved numerically. The effects of the buoyancy force, material parameters, and viscous dissipative heat on the friction factor, total heat transfer, displacement thickness, and wall couple stress, as well as the details of the velocity, microrotation, and temperature fields are discussed. A comparison has been made with the corresponding results for Newtonian fluids. Micropolar fluids display drag reduction and reduced heat transfer rate as compared with Newtonian fluids. Also the micropolar properties of the fluid are found to play an important role in controlling flow separation. Furthermore, it is observed that, for high values of the buoyancy and material parameters, the flow and thermal fields are significantly affected by the presence of viscous dissipation heat.
10
Srinivas, J., J. V. Ramana Murthy e Ali J. Chamkha. "Analysis of entropy generation in an inclined channel flow containing two immiscible micropolar fluids using HAM". International Journal of Numerical Methods for Heat & Fluid Flow 26, n.º 3/4 (3 de maio de 2016): 1027–49. http://dx.doi.org/10.1108/hff-09-2015-0354.
Texto completo da fonteResumo:
Purpose – The purpose of this paper is to examine the flow, heat transfer and entropy generation characteristics for an inclined channel of two immiscible micropolar fluids. Design/methodology/approach – The flow region consists of two zones, the flow of the heavier fluid taking place in the lower zone. The flow is assumed to be governed by Eringen’s micropolar fluid flow equation. The resulting governing equations are then solved using the homotopy analysis method. Findings – The following findings are concluded: first, the entropy generation rate is more near the plates in both the zones as compared to that of the interface. This indicates that the friction due to surface on the fluids increases entropy generation rate. Second, the entropy generation rate is more near the plate in Zone I than that of Zone II. This may be due to the fact that the fluid in Zone I is more viscous. This indicates the more the viscosity of the fluid is, the more the entropy generation. Third, Bejan number is the maximum at the interface of the fluids. This indicates that the amount of exergy (available energy) is maximum and irreversibility is minimized at the interface between the fluids. Fourth, as micropolarity increases, entropy generation rate near the plates decreases and irreversibility decreases. This indicates an important industrial application for micropolar fluids to use them as a good lubricant. Originality/value – The problem is original as no work has been reported on entropy generation in an inclined channel with two immiscible micropolar fluids.
11
Chandrawat, Rajesh Kumar, Varun Joshi e O. Anwar Bég. "Ion Slip and Hall Effects on Generalized Time-Dependent Hydromagnetic Couette Flow of Immiscible Micropolar and Dusty Micropolar Fluids with Heat Transfer and Dissipation: A Numerical Study". Journal of Nanofluids 10, n.º 3 (1 de setembro de 2021): 431–46. http://dx.doi.org/10.1166/jon.2021.1792.
Texto completo da fonteResumo:
The hydrodynamics of immiscible micropolar fluids are important in a variety of engineering problems, including biofluid dynamics of arterial blood flows, pharmacodynamics, Principle of Boundary layers, lubrication technology, short waves for heat-conducting fluids, sediment transportation, magnetohydrodynamics, multicomponent hydrodynamics, and electrohydrodynamic. Motivated by the development of biological fluid modeling and medical diagnosis instrumentation, this article examines the collective impacts of ion slip, viscous dissipation, Joule heating, and Hall current on unsteady generalized magnetohydrodynamic (MHD) Couette flow of two immiscible fluids. Two non-Newtonian incompressible magnetohydrodynamic micropolar and micropolar dusty (fluid-particle suspension) fluids are considered in a horizontal duct with heat transfer. No-slip boundary conditions are assumed at the channel walls and constant pressure gradient. Continuous shear stress and fluid velocity are considered across the interface between the two immiscible fluids. The coupled partial differential equations are formulated for fluids and particle phases and the velocities, temperatures, and microrotation profiles are obtained. Under the physically realistic boundary and interfacial conditions, the Modified cubic-Bspline differential quadrature approach (MCB-DQM) is deployed to obtain numerical results. The influence of the magnetic, thermal, and other pertinent parameters, i.e. Hartmann magnetic number, Eckert (dissipation) number, Reynolds number, Prandtl number, micropolar material parameters, Hall and ion-slip parameters, particle concentration parameter, viscosity ratio, density ratio, and time on velocity, microrotation, and temperature characteristics are illustrated through graphs. The MCB-DQM is found to be in good agreement with accuracy and the skin friction coefficient and Nusselt number are also explored. It is found that fluids and particle velocities are reduced with increasing Hartmann numbers whereas they are elevated with increment in ion-slip and Hall parameters. Temperatures are generally enhanced with increasing Eckert number and viscosity ratio. The simulations are relevant to nuclear heat transfer control, MHD energy generators, and electromagnetic multiphase systems in chemical engineering.
12
Uddin, Ziya, Manoj Kumar e Souad Harmand. "Influence of thermal radiation and heat generation/absorption on MHD heat transfer flow of a micropolar fluid past a wedge considering hall and ion slip currents". Thermal Science 18, suppl.2 (2014): 489–502. http://dx.doi.org/10.2298/tsci110712085u.
Texto completo da fonteResumo:
In this paper a numerical model is developed to examine the effect of thermal radiation on magnetohydrodynamic heat transfer flow of a micropolar fluid past a non-conducting wedge in presence of heat source/sink. In the model it is assumed that the fluid is viscous, incompressible and electrically conducting. The Hall and ion slip effects have also been taken into consideration. The model contains highly non-linear coupled partial differential equations which have been converted into ordinary differential equation by using the similarity transformations. These equations are then solved numerically by Shooting technique along with the Runge-Kutta-Fehlberg integration scheme for entire range of parameters with appropriate boundary conditions. The effects of various parameters involved in the problem have been studied with the help of graphs. Numerical values of skin friction coefficients and Nusselt number are presented in tabular form. The results showed that the micropolar fluids are better to reduce local skin drag as compared to Newtonian fluids and the presence of heat sink increases the heat transfer rate.
13
Ahmad, Farooq, A. Othman Almatroud, Sajjad Hussain, Shan E. Farooq e Roman Ullah. "Numerical Solution of Nonlinear Diff. Equations for Heat Transfer in Micropolar Fluids over a Stretching Domain". Mathematics 8, n.º 5 (25 de maio de 2020): 854. http://dx.doi.org/10.3390/math8050854.
Texto completo da fonteResumo:
A numerical study based on finite difference approximation is attempted to analyze the bulk flow, micro spin flow and heat transfer phenomenon for micropolar fluids dynamics through Darcy porous medium. The fluid flow mechanism is considered over a moving permeable sheet. The heat transfer is associated with two different sets of boundary conditions, the isothermal wall and isoflux boundary. On the basis of porosity of medium, similarity functions are utilized to avail a set of ordinary differential equations. The non-linear coupled ODE’s have been solved with a very stable and reliable numerical scheme that involves Simpson’s Rule and Successive over Relaxation method. The accuracy of the results is improved by making iterations on three different grid sizes and higher order accuracy in the results is achieved by Richardson extrapolation. This study provides realistic and differentiated results with due considerations of micropolar fluid theory. The micropolar material parameters demonstrated reduction in the bulk fluid speed, thermal distribution and skin friction coefficient but increase in local heat transfer rate and couple stress. The spin behavior of microstructures is also exhibited through microrotation vector N ( η ) .
14
Chandrawat, Rajesh Kumar, Varun Joshi e O. Anwar Bég. "Numerical Study of Interface Tracking for the Unsteady Flow of Two Immiscible Micropolar and Newtonian Fluids Through a Horizontal Channel with an Unstable Interface". Journal of Nanofluids 10, n.º 4 (1 de dezembro de 2021): 552–63. http://dx.doi.org/10.1166/jon.2021.1805.
Texto completo da fonteResumo:
The dynamics of the interaction between immiscible fluids is relevant to numerous complex flows in nature and industry, including lubrication and coating processes, oil extraction, physicochemical separation techniques, etc. One of the most essential components of immiscible flow is the fluid interface, which must be consistently monitored. In this article, the unsteady flow of two immiscible fluids i.e., an Eringen micropolar and Newtonian liquid is considered in a horizontal channel. Despite the no-slip and hyper-stick shear stress condition at the channel edge, it is accepted that the liquid interface is dynamic, migrating from one position to the next and possibly get absolute change; as a result, The CS (continuum surface) model is integrated with the single moment equation based on the VOF (volume of fluid) approach to trace the interface. The immiscible fluids are considered to flow under three applied pressure gradients (constant, decaying, and periodic) and flow is analyzed under seamless shear stress over the entire interface. The modified cubic b-spline differential quadrature method (MCB-DQM) is used to solve the modeled coupled partial differential equations for the fluid interface evolution. The advection and tracking of the interface with time, wave number, and amplitude are illustrated through graphs. It is observed that the presence of micropolar parameters affects the interface with time. The novelty of the current study is that previous studies (which considered the smooth and unstable movement of the micropolar fluid, the steady stream of two immiscible fluids, and interface monitoring through different modes) are extended and generalized to consider the time-dependent flow of two immiscible fluids namely Eringen micropolar and Newtonian with a moving interface in a horizontal channel. For the decaying pressure gradient case, which requires more time to achieve the steady-state, the peak of the waves resembles those for the constant pressure gradient case. The interface becomes steady for a more extensive time when a constant pressure gradient is applied. The interface becomes stable quickly with time as the micropolar parameter is decreased for the constant pressure gradient case i.e., weaker micropolar fluids encourage faster stabilization of the interface. With periodic pressure gradient, the interface takes more time to stabilize, and the crest of the waves is significantly higher in amplitude compared to the constant and decaying pressure cases. The simulations demonstrate the excellent ability of MCB-DQM to analyze complex interfacial immiscible flows.
15
Rafique, Anwar, Misiran, Khan, Baleanu, Nisar, Sherif e Seikh. "Hydromagnetic Flow of Micropolar Nanofluid". Symmetry 12, n.º 2 (6 de fevereiro de 2020): 251. http://dx.doi.org/10.3390/sym12020251.
Texto completo da fonteResumo:
Similar to other fluids (Newtonian and non-Newtonian), micropolar fluid also exhibits symmetric flow and exact symmetric solution similar to the Navier–Stokes equation; however, it is not always realizable. In this article, the Buongiorno mathematical model of hydromagnetic micropolar nanofluid is considered. A joint phenomenon of heat and mass transfer is studied in this work. This model indeed incorporates two important effects, namely, the Brownian motion and the thermophoretic. In addition, the effects of magnetohydrodynamic (MHD) and chemical reaction are considered. The fluid is taken over a slanted, stretching surface making an inclination with the vertical one. Suitable similarity transformations are applied to develop a nonlinear transformed model in terms of ODEs (ordinary differential equations). For the numerical simulations, an efficient, stable, and reliable scheme of Keller-box is applied to the transformed model. More exactly, the governing system of equations is written in the first order system and then arranged in the forms of a matrix system using the block-tridiagonal factorization. These numerical simulations are then arranged in graphs for various parameters of interest. The physical quantities including skin friction, Nusselt number, and Sherwood number along with different effects involved in the governing equations are also justified through graphs. The consequences reveal that concentration profile increases by increasing chemical reaction parameters. In addition, the Nusselt number and Sherwood number decreases by decreasing the inclination.
16
Eringen, A. C. "A mixture theory for geophysical fluids". Nonlinear Processes in Geophysics 11, n.º 1 (25 de fevereiro de 2004): 75–82. http://dx.doi.org/10.5194/npg-11-75-2004.
Texto completo da fonteResumo:
Abstract. A continuum theory is developed for a geophysical fluid consisting of two species. Balance laws are given for the individual components of the mixture, modeled as micropolar viscous fluids. The continua allow independent rotational degrees of freedom, so that the fluids can exhibit couple stresses and a non-symmetric stress tensor. The second law of thermodynamics is used to develop constitutive equations. Linear constitutive equations are constituted for a heat conducting mixture, each species possessing separate viscosities. Field equations are obtained and boundary and initial conditions are stated. This theory is relevant to an atmospheric mixture consisting of any two species from rain, snow and/or sand. Also, this is a continuum theory for oceanic mixtures, such as water and silt, or water and oil spills, etc.
17
Hasnain, Jafar, e Zaheer Abbas. "Entropy generation analysis on two-phase micropolar nanofluids flow in an inclined channel with convective heat transfer". Thermal Science 23, n.º 3 Part B (2019): 1765–77. http://dx.doi.org/10.2298/tsci170715221h.
Texto completo da fonteResumo:
This article deals the entropy generation due to mixed convective flow of two nonmiscible and electrically conducting fluids streaming through an inclined channel by considering convective boundary conditions at the walls of channel. Micropolar fluid is flowing adjacent to the upper wall of the channel and fluid flowing between the non- Newtonain fluid layer and lower plate of channel is water based nanofluid. The transformed dimensionless coupled equations are solved numerically via shooting technique. The numerical results are plotted to analyze the effects of various emerging parameters. This study shows that an increase in magnetic parameter and Brinkman number causes an increase in entropy generation whereas entropy generation reduces with increase in micropolar parameter and nanoparticle volume fraction.
18
Khalid, Asma, Ilyas Khan e Sharidan Shafie. "Free convection flow of micropolar fluids over an oscillating vertical plate". Malaysian Journal of Fundamental and Applied Sciences 13, n.º 4 (26 de dezembro de 2017): 654–58. http://dx.doi.org/10.11113/mjfas.v13n4.738.
Texto completo da fonteResumo:
An analytical investigation is carried out to study the unsteady free convection flow of micropolar fluids over an oscillating vertical plate. Wall couple stress is engaged at the bounding plate with isothermal temperature. Problem is modelled in terms of coupled partial differential equations together with some physical conditions and then written in non-dimensional form. Exact solutions are obtained using the Laplace transform technique. Analytical results of velocity, microrotation and temperature are plotted in graphs and discussed for various embedded parameters. Excellent validation of present results is achieved with existing results in literature. It is observed that, the velocity is smaller for micropolar fluids than for Newtonian fluids.
19
K.C., Durga Jang, e Dipendra Regmi. "Global regularity criteria for the 2D Magneto-micropolar Equations with Partial Dissipation". Nepali Mathematical Sciences Report 40, n.º 1-2 (31 de dezembro de 2023): 55–70. http://dx.doi.org/10.3126/nmsr.v40i1-2.61498.
Texto completo da fonteResumo:
The magneto-micropolar equations model the motion of electrically conducting micropolar fluids in the presence of a magnetic field.These equations have been the focus of numerous analytical, experimental, and numerical investigations.One fundamental problem concerning these equations is whether their classical solutions are globally regular for all time or if they develop finite time singularities.The global regularity problem can be particularly challenging when there is only partial dissipation. In this paper, we study the 2D incompressible magneto-micropolar equations with partial dissipation prove two new regularity results. The first result addresses a weak solution, and the second result establishes global regularity criteria. As a consequence, we can single out one special partial dissipation case and establish the global regularity if (∂y u1, ∂y u2) ∈ L∞ [0, T ], R2. The proofs of our main results rely on anisotropic Sobolev-type inequalities and the appropriate combination and cancellation of terms.
20
Tangsali, Param R., Nagaraj N. Katagi, Ashwini Bhat e Manjunath Shettar. "Analysis of Magnetohydrodynamic Free Convection in Micropolar Fluids over a Permeable Shrinking Sheet with Slip Boundary Conditions". Symmetry 16, n.º 4 (29 de março de 2024): 400. http://dx.doi.org/10.3390/sym16040400.
Texto completo da fonteResumo:
The convective micropolar fluid flow over a permeable shrinking sheet in the presence of a heat source and thermal radiation with the magnetic field directed towards the sheet has been studied in this paper. The mathematical formulation considers the partial slip condition at the sheet, allowing a realistic representation of the fluid flow near the boundary. The governing equations for the flow, heat, and mass transfer are formulated using the conservation laws of mass, momentum, angular momentum, energy, and concentration. The resulting nonlinear partial differential equations are transformed into a system of ordinary differential equations using suitable similarity transformations. The numerical solutions are obtained using robust computational techniques to examine the influence of various parameters on the velocity, temperature, and concentration profiles. The impact of slip effects, micropolar fluid characteristics, and permeability parameters on the flow features and heat transfer rates are thoroughly analyzed. The findings of this investigation offer valuable insights into the behavior of micropolar fluids in free convection flows over permeable shrinking sheets with slip, providing a foundation for potential applications in various industrial and engineering processes. Key findings include the observation that the velocity profile overshoots for assisting flow with decreasing viscous force and rising magnetic effects as opposed to opposing flow. The thermal boundary layer thickness decreases due to buoyant force but shows increasing behavior with heat source parameters. The present result agrees with the earlier findings for specific parameter values in particular cases.
21
Nabwey, Hossam A., Ahmed M. Rashad e Waqar A. Khan. "Slip Microrotation Flow of Silver-Sodium Alginate Nanofluid via Mixed Convection in a Porous Medium". Mathematics 9, n.º 24 (14 de dezembro de 2021): 3232. http://dx.doi.org/10.3390/math9243232.
Texto completo da fonteResumo:
In the previous decennium, considerable applications ofnanoparticles have been developed in the area of science. Nanoparticles with micropolar fluid suspended in conventional fluids can increase the heat transfer. Micropolar fluids have attracted much research attention because of their use in industrial processes. Exotic lubricants, liquid crystal solidification, cooling of a metallic plate in a bath, extrusion of metals and polymers, drawing of plastic films, manufacturing of glass and paper sheets, and colloidal suspension solutions are just a few examples. The primary goal of this studywas to see how radiation and velocity slip affect the mixed convection of sodium alginate nanofluid flow over a non-isothermal wedge in a saturated porous media.In this communication, theTiwari and Das model was employed to investigate the micropolarnanofluid flow via mixed convection over aradiated wedge in a saturated porous medium with the velocity slip condition. Nanoparticles of silver (Ag) wreused in asodium alginate base fluid. The intended system of governing equations is converted to a set of ordinary differential equations and then solved applying the finite difference method. Variousfluid flows, temperatures, and physical quantities of interest were examined. The effects of radiation on the skin friction are negligible in the case of forced and mixed convection, whereas radiation increases the skin friction in free convection. It is demonstrated that the pressure gradient, solid volume fraction, radiation, and slip parameters enhance the Nusselt number, whereas the micropolar parameter reduces the Nusselt number.
22
Cruz, Felipe W. "Global strong solutions for the incompressible micropolar fluids equations". Archiv der Mathematik 113, n.º 2 (6 de abril de 2019): 201–12. http://dx.doi.org/10.1007/s00013-019-01319-4.
Texto completo da fonte
23
Nazeer, Mubbashar, N. Ali e T. Javed. "Effects of moving wall on the flow of micropolar fluid inside a right angle triangular cavity". International Journal of Numerical Methods for Heat & Fluid Flow 28, n.º 10 (1 de outubro de 2018): 2404–22. http://dx.doi.org/10.1108/hff-10-2017-0424.
Texto completo da fonteResumo:
Purpose The main purpose of this study is to examine the effects of moving wall on the mixed convection flow and heat transfer in a right-angle triangular cavity filled with a micropolar fluid. Design/methodology/approach It is assumed that the bottom wall is uniformly heated and the right inclined wall is cold, whereas the vertical wall is adiabatic and moving with upward/downward velocity v0/−v0, respectively. The micropolar fluid is considered to satisfy the Boussinesq approximation. The governing equations and boundary conditions are solved using the Galerkin finite element method. The Penalty method is used to eliminate the pressure term from the momentum equations. To accomplish the consistent solution, the value of the penalty parameter is taken 107. The simulations are performed for a wide range of Richardson number, micropolar parameter, Prandtl number and Reynolds number. Findings The results are presented in the form of streamlines, isotherms and variations of average Nusselt number and fluid flow rate depending on the Richardson number, Prandtl number, micropolar parameter and direction of the moving wall. The flow field and temperature distribution in the cavity are affected by these parameters. An average Nusselt number into the cavity in both cases increase with increasing Prandtl and Richardson numbers and decreases with increasing micropolar parameter, and it has a maximum value when the lid is moving in the downward direction for all the physical parameters. Research limitations/implications The present investigation is conducted for the steady, two-dimensional mixed convective flow in a right-angle triangular cavity filled with micropolar fluid. An extension of the present study with the effects of cavity inclination, square cavity, rectangular, trapezoidal and wavy cavity will be the interest of future work. Originality/value This work studies the effects of moving wall, micropolar parameter, Richardson number, Prandtl number and Reynolds number parameter in a right-angle triangular cavity filled with a micropolar fluid on the fluid flow and heat transfer. This study might be useful to flows of biological fluids in thin vessels, polymeric suspensions, liquid crystals, slurries, colloidal suspensions, exotic lubricants, solar engineering for construction of triangular solar collector, construction of thermal insulation structure and geophysical fluid mechanics, etc.
24
IDO, Yasushi, e Takahiko TANAHASHI. "Fundamental equations for magnetic fluids by micropolar theory. 2nd report: Constitutive equations." Transactions of the Japan Society of Mechanical Engineers Series B 56, n.º 525 (1990): 1392–99. http://dx.doi.org/10.1299/kikaib.56.1392.
Texto completo da fonte
25
Cheruku, Vasavi, e B. Ravindra Reddy. "Numerical Study in Effect of Thermal Slip on Two Fluid Flow in a Vertical Channel". Transactions on Energy Systems and Engineering Applications 4, n.º 2 (17 de julho de 2023): 1–18. http://dx.doi.org/10.32397/tesea.vol4.n2.517.
Texto completo da fonteResumo:
The present study investigates the effect of thermal slip on an immiscible flow of micropolar and viscous fluids in a vertical channel. The left boundary is subjected to thermal slip with appropriate boundary and interface conditions, resulting in a linked system of nonlinear partial differential equations. The ND Solve technique in Mathematica software is used to implement the Runge-Kutta method of the sixth order. The velocity, temperature, and concentration equations are then calculated. The mass, heat, and velocity transmission rates at the boundaries were recorded for all the variations in the governing parameters. In addition, the impact of relevant parameters on various physical properties of micropolar and viscous fluids is analyzed through graphical means. The results are then discussed in detail. Thermal slip, Grashof number, molecular number, magnetic parameter, and Reynolds number are crucial factors that significantly affect heat and mass transfer in fluid flow. The effect of the increased thermal slip is noted to result in a decrease in both the velocity profile and temperature. It was also observed that higher values of Grashof and molecular Grashof numbers led to increased velocity and angular velocity.
26
Benariba, Aboubakeur, Ahmed Bouzidane e Marc Thomas. "Analytical analysis of a rigid rotor mounted on three hydrostatic pads lubricated with micropolar fluids". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233, n.º 6 (23 de outubro de 2018): 859–69. http://dx.doi.org/10.1177/1350650118806374.
Texto completo da fonteResumo:
Analytical analysis of rigid rotor set vertically, supported by a new hydrostatic squeeze film damper consisting in three hydrostatic pads fed through three capillary restrictors operating with micropolar lubricant is presented. The modified Reynolds equation is obtained using the micropolar lubrication theory and solving it analytically. The calculation of the flow rate, dimensionless vibratory amplitude and amplitude of transmitted forces are determined by resolving the equations of rotor motion using nonlinear methods. It has been observed that a rigid rotor operating with micropolar lubricant shows an increase in the value of transmitted forces at high speeds and a reduction in the value of vibratory response at critical speed when compared to a corresponding similar rigid rotor operating with Newtonian lubricant.
27
Chu, Li Ming, Jaw-Ren Lin, Yuh-Ping Chang e Chung-Chun Wu. "Elastohydrodynamic lubrication of circular contacts at pure squeeze motion with micropolar lubricants". Industrial Lubrication and Tribology 68, n.º 6 (12 de setembro de 2016): 640–46. http://dx.doi.org/10.1108/ilt-10-2015-0139.
Texto completo da fonteResumo:
Purpose This paper aims to explore pure squeeze elastohydrodynamic lubrication (EHL) motion of circular contacts with micropolar lubricants under constant load. The proposed model can reasonably calculate the pressure distributions, film thicknesses and normal squeeze velocities during the pure squeeze process. Design/methodology/approach The transient modified Reynolds equation is derived in polar coordinates using micropolar fluids theory. The finite difference method and the Gauss–Seidel iteration method are used to solve the transient modified Reynolds equation, the elasticity deformation equation, load balance equation and lubricant rheology equations simultaneously. Findings The simulation results reveal that the effect of the micropolar lubricant is equivalent to enhancing the lubricant viscosity. As the film thickness is enlarged, the central pressure and film thickness for micropolar lubricants are larger than those of Newtonian fluids under the same load in the elastic deformation stage. The greater the coupling parameter (N), the greater the maximum central pressure. However, the smaller the characteristic length (L), the greater the maximum central pressure. The time needed to achieve maximum central pressure increases with increasing N and L. Originality/value A numerical method for general applications was developed to investigate the effects of the micropolar lubricants at pure squeeze EHL motion of circular contacts under constant load.
28
Lin, Hongxia, Sen Liu, Heng Zhang e Qing Sun. "Stability for a system of the 2D incompressible magneto-micropolar fluid equations with partial mixed dissipation". Nonlinearity 37, n.º 5 (18 de março de 2024): 055001. http://dx.doi.org/10.1088/1361-6544/ad3098.
Texto completo da fonteResumo:
Abstract This paper focuses on the 2D incompressible anisotropic magneto-micropolar fluid equations with vertical dissipation, horizontal magnetic diffusion, and horizontal vortex viscosity. The goal is to investigate the stability of perturbations near a background magnetic field in the 2D magneto-micropolar fluid equations. Two main results are obtained. The first result is based on the linear system. Global existence for any large initial data and asymptotic linear stability are established. The second result explores stability for the nonlinear system. It is proven that if the initial data are sufficiently small, then the solution for some perturbations near a background magnetic field remains small. Additionally, the long-time behaviour of the solution is presented. The most challenging terms in the proof are the linear terms in the velocity equation and the micro-rotation equation that will grow with respect to time t. We are able to find some background fields to control the growth of the linear terms. Our results reveal that some background fields can stabilise electrically conducting fluids.
29
Chandrawat, Rajesh Kumar, e Varun Joshi. "Numerical Solution of the Time-Depending Flow of Immiscible Fluids with Fuzzy Boundary Conditions". International Journal of Mathematical, Engineering and Management Sciences 6, n.º 5 (1 de outubro de 2021): 1315–30. http://dx.doi.org/10.33889/ijmems.2021.6.5.079.
Texto completo da fonteResumo:
Fluid flow modeling using fuzzy boundary conditions is one of the viable areas in biofluid mechanics, drug suspension in pharmacology, as well as in the cytology and electrohydrodynamic analysis of cerebrospinal fluid data. In this article, a fuzzy solution for the two immiscible fluid flow problems is developed, which is motivated by biomechanical flow engineering. Two immiscible fluids, namely micropolar and Newtonian fluid, are considered with fuzzy boundary conditions in the horizontal channel. The flow is considered unsteady and carried out by applying a constant pressure gradient in the X-direction of the channel. The coupled partial differential equations are modeled for fuzzy profiles of velocity and micro-rotation vectors then the numerical results are obtained by the modified cubic B - spline differential quadrature method. The evolution of membership grades for velocity and microrotation profiles has been depicted with the fuzzy boundaries at the channel wall. It is observed that Micropolar fluid has a higher velocity change than Newtonian fluid, and both profiles indicate a declining nature toward the interface.
30
Sava, Valeriu Al. "A spatial decay estimate of the flow equations of micropolar fluids". International Journal of Engineering Science 24, n.º 3 (janeiro de 1986): 449–52. http://dx.doi.org/10.1016/0020-7225(86)90099-6.
Texto completo da fonte
31
Sil, Sayantan. "Flow of MHD micropolar fluid through porous medium: a hodograhic approach for exact solution". Annals of Mathematics and Computer Science 22 (28 de março de 2024): 128–48. http://dx.doi.org/10.56947/amcs.v22.287.
Texto completo da fonteResumo:
An analytical study of the motion of a steady, homogenous, incompressible, plane electrically conducting micropolar fluid flow through a porous medium subjected to a transverse magnetic field is carried out. The governing non linear partial differential equations describing the continuity, momentum and angular momentum are converted into a system of linear partial differential equations by means of hodograph transformation. Further the flow equations have been obtained in terms of Legendre transform function of the stream function. Results are summarized in the form of a theorem. Lastly two examples have been taken as application to illustrate the developed theory and exact solutions are determined. The expressions for velocity, micro-rotation, streamline and pressure distribution are obtained in each case. The streamline patterns are plotted and also the pressure variation with x and y are studied for varying porous media parameter at constant density of fluid and also for varying density of different fluids at constant porous media parameter value.
32
Kumar, Sanjay, Asif Ali Shaikh, Hazoor Bux Lanjwani e Sayed Feroz Shah. "MHD flow and heat transfer of micropolar nanofluid on a linearly stretching/shrinking porous surface". VFAST Transactions on Mathematics 11, n.º 1 (9 de maio de 2023): 141–54. http://dx.doi.org/10.21015/vtm.v11i1.1456.
Texto completo da fonteResumo:
In this paper, there is considered incompressible steady two-dimensional laminar MHD boundary layer flow, heat and mass transfer characteristics of micropolar nanofluid across a linearly stretching/shrinking porous surface. The effects of the magnetic, thermal slip, mass slip and heat source sink parameters are also considered. By applyingn appropriate similarity variables, the system of governing partial differential equations associated to micropolar nanofluid flow is transformed into a system of non - linear ordinary differential equations. The resulting equations are numerically solved in the Maple software by using shooting technique. The impact of the different applied parameters on skin friction, couple stress, Nusselt and the Sherwood numbers along the related profiles are determined for both stretching and shrinking cases of the surfaces. It was observed that with an increase in suction and magnetic parameters, the fluid velocity decreased. An increment in the thermal slip, the fluid temperature decreased and nanoparticles concentration decreases as the mass slip parameter is enhanced. An increase in concentration decreases but temperature increases. While, concentration and temperature both increase due to increase in thermophoresis parameter, and concentration also increases by increase in rate of chemical reaction. Thus, suction at the boundary and magnetic parameter acted as flow controlling parameter. It is believed that this type of investigation is very much helpful for the manufacturing of complex fluids and also for cleaning oil from surfaces.
33
Sengupta, Sanjib, e Reshmi Deb. "Gravitation modulation impact on MHD free convection flow of micropolar fluid". Journal of Naval Architecture and Marine Engineering 17, n.º 2 (30 de dezembro de 2020): 199–218. http://dx.doi.org/10.3329/jname.v17i2.41742.
Texto completo da fonteResumo:
In this paper, a theoretical study is carried out on unsteady three dimensional, laminar, free convective flow of micropolar fluid with Hall effect, Joule heating and heat sink under gravitation modulation. A uniform transverse magnetic field is applied normal to the plate along the fluid region. The magnetic Reynolds number is considered to be small due to incomparability of applied and induced magnetic field, as such the influence of induced magnetic field can be neglected. The multi parameter perturbation technique is used to solve the governed dimensionless equations. The fluid velocity profile, temperature profile and the concentration profiles are discussed with the aid of graphs and tables. The coefficient of skin friction and couple stresses are numerically computed in addition to Nusselt number and Sherwood number. The result reveals that the linear velocity increases due to escalation in gravitation modulation parameter values but for intensification in values of gravitation modulation parameter, a reverse effect is observed for the rotational velocity. A comparative analysis shows that the skin friction coefficient is less in micropolar fluid than the corresponding Newtonian fluids.
34
Kamran, Muhammad, Benchawan Wiwatanapataphee e Kuppalapalle Vajravelu. "Hall current, Newtonian heating and second-order slip effects on convective magneto-micropolar fluid flow over a sheet". International Journal of Modern Physics C 29, n.º 09 (setembro de 2018): 1850090. http://dx.doi.org/10.1142/s0129183118500900.
Texto completo da fonteResumo:
This research deals with an analysis of the Hall current effect on the mixed convective magneto-micropolar fluid flow over a permeable stretching/shrinking sheet. Impact of the Newtonian heating parameter is analyzed in the slip flow regime. The nonlinear equations of the fluid flow are derived with the help of a similarity transform and its solutions are obtained by Optimal Homotopy Analysis Method (OHAM). For limiting cases, obtained results are in excellent agreement with the available exact and numerical results in the literature. The graphical and tabular representations of the obtained results show significant effects of the physical parameters on the magneto-micropolar fluid flow and heat transfer characteristics. In particular, it is observed that, as the sheet stretches, a change in the Hall current parameter yields a higher horizontal velocity component for the lower value of the magnetic field parameter; while it produces a higher and shorter transverse velocity profile at high intensity of the magnetic field. In Magnetohydrodynamics (MHD) generators, Hall effects are an important consideration to analyze the heat transfer phenomenon with high temperature conducting fluids.
35
Muthtamilselvan, M., K. Periyadurai e Deog Hee Doh. "Effect of mutually orthogonal heated plates on buoyancy convection flow of micropolar fluid in a cavity". International Journal of Numerical Methods for Heat & Fluid Flow 28, n.º 9 (3 de setembro de 2018): 2231–51. http://dx.doi.org/10.1108/hff-03-2018-0118.
Texto completo da fonteResumo:
Purpose The main purpose of this study is to investigate the natural convection of micropolar fluid in a square cavity with two orthogonal heaters placed inside. The study of natural convection in a two-dimensional enclosure determines the effect of non-uniform heated plate on certain micropolar fluid flows which are found in many engineering applications. Therefore, because of its practical interest in the engineering fields such as building design, cooling of electronic components, melting and solidification process, solar energy systems, solar collectors, liquid crystals, animal blood, colloidal fluids and polymeric fluids, the topic needs to be further explored. Design/methodology/approach The dimensionless governing equations have been solved by finite volume method of the second-order central difference and upwind scheme. Findings The effects of the Rayleigh number, nonuniformity parameter and vortex viscosity parameter on fluid flow and heat transfer have been analyzed. The rate of heat transfer increases with an increase in the aspect ratio of the heated plates for all the values of Rayleigh number and vortex viscosity parameter. The heat transfer rate is reduced with an increase in the vortex viscosity parameter. It is predicted that the non-uniform of the baffle gives better heat transfer than uniform heating. Originality/value The present numerical results were tested against the experimental work. The present results have an excellent agreement with the results obtained by the previous experimental work.
36
IDO, Yasushi, e Takahiko TANAHASHI. "Fundamental equations for magnetic fluids by micropolar theory. 1st report: Strain tensors and balance equations." Transactions of the Japan Society of Mechanical Engineers Series B 56, n.º 525 (1990): 1385–91. http://dx.doi.org/10.1299/kikaib.56.1385.
Texto completo da fonte
37
Swalmeh, Mohammed, Hamzeh Alkasasbeh, Abid Hussanan e Mustafa Mamat. "Influence of micro-rotation and micro-inertia on nanofluid flow over a heated horizontal circular cylinder with free convection". Theoretical and Applied Mechanics 46, n.º 2 (2019): 125–45. http://dx.doi.org/10.2298/tam181120008s.
Texto completo da fonteResumo:
The addition of nanoparticles into conventional heat transfer fluids is one of the modern science techniques that offer better heat transfer performance. However, micropolar fluid model is not considered under these nanoparticles effects. Therefore, the main objective of this study is to explore the nanofluids to understand the microstructure and inertial characteristics of nanoparticles. In this paper, heat transfer flow of a micropolar nanofluid mixture containing copper (Cu) and silver (Ag) nanoparticles is investigated over a heated horizontal circular cylinder. The dimensionless governing equations are solved via an implicit finite difference scheme known as Keller-box method. The results of the nanofluid mixture are compared with those with a Newtonian fluid. The effects of different parameters on velocity, angular velocity and temperature are examined graphically for both Cu/Ag-water and Cu/Ag-kerosene oil. Results show that the heat transfer coefficient of the Cu/Ag-kerosene oil nanofluid mixture is larger than that of the Cu/Ag-water nanofluid, when comparison is based on a fixed value of the micro-rotation parameter.
38
Naduvinamani, N. B., e G. B. Marali. "Dynamic Reynolds equation for micropolar fluids and the analysis of plane inclined slider bearings with squeezing effect". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221, n.º 7 (1 de julho de 2007): 823–29. http://dx.doi.org/10.1243/13506501jet286.
Texto completo da fonteResumo:
The general dynamic Reynolds equation of sliding-squeezing surfaces with micro-polar fluids is derived for the assessment of dynamic characteristics of bearings with general film thickness. The detailed analysis is presented for the plane inclined slider bearings by using perturbation method. Two Reynolds-type equations corresponding to steady performance and perturbed characteristics are obtained. The closed form solution of these equations is obtained. The numerical computations of the results show that, the micropolar fluids provide an improved characteristics for both steady-state and the dynamic stiffness and damping characteristics. It is found that the maximum steady-load-carrying capacity is function of coupling parameter and is achieved at smaller values of profile parameter for larger values of the coupling parameter.
39
Khan, Waqar A., A. M. Rashad, S. M. M. EL-Kabeir e A. M. A. EL-Hakiem. "Framing the MHD Micropolar-Nanofluid Flow in Natural Convection Heat Transfer over a Radiative Truncated Cone". Processes 8, n.º 4 (25 de março de 2020): 379. http://dx.doi.org/10.3390/pr8040379.
Texto completo da fonteResumo:
Recently, nanoparticles have supplied diverse challenges in the area of science. The nanoparticles suspended in several conventional fluids can convert the fluids flow and heat transmission features. In this investigation, the mathematical approach is utilized to explore the magnetohydrodynamics micropolar-nanofluid flow through a truncated porous cone. In this mathematical model, non-linear radiation and suction/injection phenomena are also scrutinized with the Tiwari-Das nanoliquid pattern. The designed system of the mathematical model of the boundary value problem is converted to a set of dimensionless non-similar equations applying convenient transformations. In this study, kerosene oil is selected as the base fluid, while the nanoparticles of Fe3O4 are utilized to promote the heat transmission rate. The problem is solved numerically using the Runge-Kutta-Fehlberg method (RKF45). It is demonstrated that an enhancement in the pertinent parameters improves the heat transmission rate.
40
WENG, HUEI CHU, CHA'O-KUANG CHEN e MIN-HSING CHANG. "Stability of micropolar fluid flow between concentric rotating cylinders". Journal of Fluid Mechanics 631 (17 de julho de 2009): 343–62. http://dx.doi.org/10.1017/s0022112009007150.
Texto completo da fonteResumo:
In this study, the theory of micropolar fluids is employed to study the stability problem of flow between two concentric rotating cylinders. The field equations subject to no-slip conditions (non-zero velocity and microrotation velocity components) at the wall surfaces are solved. The analytical solutions of the velocity and microrotation velocity fields as well as the shear stress difference, couple stress and strain rate for basic flow are obtained. The equations with respect to non-axisymmetric disturbances are derived and solved by a direct numerical procedure. It is found that non-zero wall-surface microrotation velocity makes the flow faster and more unstable. Moreover, it tends to reduce the limits of critical non-axisymmetric disturbances. The effect on the stability characteristics can be magnified by increasing the microstructure or couple-stress parameter or the microinertia parameter for the cases of corotating cylinders and a stationary outer cylinder or by decreasing the radius ratio or the microinertia parameter for the case of counterrotating cylinders.
41
Sheremet, Mikhail, Teodor Grosan e Ioan Pop. "Natural convection in a triangular cavity filled with a micropolar fluid". International Journal of Numerical Methods for Heat & Fluid Flow 27, n.º 2 (6 de fevereiro de 2017): 504–15. http://dx.doi.org/10.1108/hff-02-2016-0061.
Texto completo da fonteResumo:
Purpose The purpose of this paper is to study steady natural convection flow and heat transfer in a triangular cavity filled with a micropolar fluid. Design/methodology/approach It is assumed that the left inclined wall is heated, whereas the other walls are cooled and maintained at constant temperatures. All four walls of the cavity are assumed to be rigid and impermeable. The micropolar fluid is considered to satisfy the Boussinesq approximation. The governing equations and boundary conditions are solved using the finite difference method of the second order accuracy over a wide range of the Rayleigh number, Prandtl number, vortex viscosity parameter and two values of micro-gyration parameter, namely, strong concentration (n = 0) and week concentration (n = 0.5). Findings The results are presented in the form of streamlines, isotherms, vorticity contours and variations of average Nusselt number and fluid flow rate depending on the Rayleigh number, Prandtl number, vortex viscosity parameter and micro-gyration parameter. The flow field and temperature distribution in the cavity are affected by these parameters. The heat transfer rate into the cavity is decreasing upon the raise of the vortex viscosity parameter. Originality/value This work studies the effects of vortex viscosity parameter and micro-gyration parameter in a triangular cavity filled with a micropolar fluid on the fluid flow and heat transfer. This study might be useful to flows of biological fluids in thin vessels, polymeric suspensions, liquid crystals, slurries, colloidal suspensions, exotic lubricants; for the design of solar collectors, room ventilation systems and electronic cooling systems; and so on.
42
Nadeem, S., M. Y. Malik e Nadeem Abbas. "Heat transfer of three-dimensional micropolar fluid on a Riga plate". Canadian Journal of Physics 98, n.º 1 (janeiro de 2020): 32–38. http://dx.doi.org/10.1139/cjp-2018-0973.
Texto completo da fonteResumo:
In this article, we deal with prescribed exponential surface temperature and prescribed exponential heat flux due to micropolar fluids flow on a Riga plate. The flow is induced through an exponentially stretching surface within the time-dependent thermal conductivity. Analysis is performed inside the heat transfer. In our study, two cases are discussed here, namely prescribed exponential order surface temperature (PEST) and prescribed exponential order heat flux (PEHF). The governing systems of the nonlinear partial differential equations are converted into nonlinear ordinary differential equations using appropriate similarity transformations and boundary layer approach. The reduced systems of nonlinear ordinary differential equations are solved numerically with the help of bvp4c. The significant results are shown in tables and graphs. The variation due to modified Hartman number M is observed in θ (PEST) and [Formula: see text] (PEHF). θ and [Formula: see text] are also reduced for higher values of the radiation parameter Tr. Obtained results are compared with results from the literature.
43
Ajala, Olusegun Adebayo, Peter Adegbite, Adebowale Martins Obalalu, Amir Abbas, Abel O. Owolabi e Olusegun Babatunde Ojewola. "Bio-Convective Flow of Micropolar Nanofluids over an Inclined Permeable Stretching Surface with Radiative Activation Energy". Journal of Biomimetics, Biomaterials and Biomedical Engineering 65 (23 de julho de 2024): 1–13. http://dx.doi.org/10.4028/p-c79r3y.
Texto completo da fonteResumo:
The focal concern of this study is to examine the behaviour of bio-convective flow featuring micropolar nanofluids over an inclined permeable stretching surface while considering the influence of radiative activation energy. This investigation addresses the complex interplay of factors such as biological activity, convective heat and mass transfer, unique attributes of micropolar fluids, the dynamics of nanofluids, and radiative effects. This analysis employed Buongiorno’s model, considering thermal radiation and activation energy on the bioconvective flow of micropolar nanofluids over an inclined stretching surface. Some suitable similarity variables were used to obtain a set of non-linear differential equations from the initial partial differential equations which were then solved numerically using the Runge-Kutta Fehberg method along with shooting technique. The effects of some physical parameters were examined on the velocity, temperature, concentration, and microorganism density profiles of the flow. The result revealed that each increase in the heat source/sink, thermal radiation, thermophoresis, and Brownian motion lead to a corresponding increase in the thermal boundary layer; activation energy increased the concentration while Peclet number and bioconvective Lewis number declined the microorganism density profile. Insights gleaned from this study can find applications in biomedical fields. Understanding the behavior of bio-convective nanofluids has implications for controlled heat transfer in medical applications like hyperthermia treatments or targeted drug delivery, thereby impacting patient care.
44
Adeniyan, Adetunji, Gbeminiyi M. Sobamowo e Samsondeen O. Kehinde. "Impacts of Slips on Peristaltic flow and Heat transfer of micropolar fluids in an asymmetric channel". International Journal of Mathematical Analysis and Optimization: Theory and Applications 7, n.º 2 (março de 2022): 107–29. http://dx.doi.org/10.52968/28308561.
Texto completo da fonteResumo:
The study of peristaltic motion is an area of increasing research interest in industrial, biological and engineering interest. In this study, effects of slips on the peristaltic flow and heat transfer of micropolar fluids in an asymmetric channel are investigated analytically. The developed non-linear coupled partial differential equations are converted into non-linear coupled ordinary differential equations using similarity transformation. The ordinary differential equations are solved for the cases when the thermal viscosity parameter is zero and non-zero. Exact solutions are gotten for the cases of linear and non-linear when the thermal viscosity parameter is zero and non-zero, respectively. The obtain results depict that viscous and thermal slips enhances the flow of the bolus as it is being transported through the digestive system. Also, the effect of microrotation helps in reducing the pressure gradient for the flow.
45
Vafeas, Panayiotis, Polycarpos K. Papadopoulos e Pavlos M. Hatzikonstantinou. "On the Perturbation of the Three-Dimensional Stokes Flow of Micropolar Fluids by a Constant Uniform Magnetic Field in a Circular Cylinder". Mathematical Problems in Engineering 2011 (2011): 1–41. http://dx.doi.org/10.1155/2011/659691.
Texto completo da fonteResumo:
Modern engineering technology involves the micropolar magnetohydrodynamic flow of magnetic fluids. Here, we consider a colloidal suspension of non-conductive ferromagnetic material, which consists of small spherical particles that behave as rigid magnetic dipoles, in a carrier liquid of approximately zero conductivity and low-Reynolds number properties. The interaction of a 3D constant uniform magnetic field with the three-dimensional steady creeping motion (Stokes flow) of a viscous incompressible micropolar fluid in a circular cylinder is investigated, where the magnetization of the ferrofluid has been taken into account and the magnetic Stokes partial differential equations have been presented. Our goal is to apply the proper boundary conditions, so as to obtain the flow fields in a closed analytical form via the potential representation theory, and to study several characteristics of the flow. In view of this aim, we make use of an improved new complete and unique differential representation of magnetic Stokes flow, valid for non-axisymmetric geometries, which provides the velocity and total pressure fields in terms of easy-to-find potentials. We use these results to simulate the creeping flow of a magnetic fluid inside a circular duct and to obtain the flow fields associated with this kind of flow.
46
Moosaie, Amin, e Gholamali Atefi. "Cosserat Modeling of Turbulent Plane-Couette and Pressure-Driven Channel Flows". Journal of Fluids Engineering 129, n.º 6 (26 de janeiro de 2007): 806–10. http://dx.doi.org/10.1115/1.2734251.
Texto completo da fonteResumo:
The theory of micropolar fluids based on a Cosserat continuum model is utilized for analysis of two benchmarks, namely, plane-Couette and pressure-driven channel flows. In the obtained theoretical velocity distributions, some new terms have appeared in addition to linear and parabolic distributions of classical fluid mechanics based on the Navier-Stokes equations. Utilizing the principles of irreversible thermodynamics, a new dissipative boundary condition is developed for angular velocity at flat plates by taking the couple-stress vector into account. The obtained results for the velocity profiles have been compared to results of recent and classical experiments. This paper demonstrates that continuum mechanical theories of higher orders, for instance Cosserat model, are able to describe a complex phenomenon, such as hydrodynamic turbulence, more precisely.
47
Abdal, Sohaib, Bagh Ali, Saba Younas, Liaqat Ali e Amna Mariam. "Thermo-Diffusion and Multislip Effects on MHD Mixed Convection Unsteady Flow of Micropolar Nanofluid over a Shrinking/Stretching Sheet with Radiation in the Presence of Heat Source". Symmetry 12, n.º 1 (26 de dezembro de 2019): 49. http://dx.doi.org/10.3390/sym12010049.
Texto completo da fonteResumo:
The main purpose of this study is to investigate the multislip effects on the magneto-hydrodynamic (MHD) mixed convection unsteady flow of micropolar nano-fluids over a stretching/shrinking sheet along with radiation in the presence of a heat source. The consequences of multislip and buoyancy conditions have been integrated. By using the suitable similarity variables are used to solve the governing non-linear partial differential equations into a system of coupled non-linear ordinary differential equations. The transformed equations are solved numerically by using Runge–Kutta fourth-order method with shooting technique. The impacts of the several parameters on the velocity, temperature, micro-rotation, and concentration profiles as well as on the skin friction coefficient, Sherwood number, and Nusselt number are discussed with the help of graphs and tables.
48
Rafique, Khuram, Muhammad Imran Anwar, Masnita Misiran, Ilyas Khan, Asiful H. Seikh, El-Sayed M. Sherif e Kottakkaran Sooppy Nisar. "Keller-Box Simulation for the Buongiorno Mathematical Model of Micropolar Nanofluid Flow over a Nonlinear Inclined Surface". Processes 7, n.º 12 (4 de dezembro de 2019): 926. http://dx.doi.org/10.3390/pr7120926.
Texto completo da fonteResumo:
Brownian motion and thermophoresis diffusions are the fundamental ideas of abnormal upgrading in thermal conductivity via binary fluids (base fluid along with nanoparticles). The influence of Brownian motion and thermophoresis are focused on in the Buongiorno model. In this problem, we considered the Buongiorno model with Brownian motion and thermophoretic effects. The nonlinear ordinary differential equations are recovered from the partial differential equations of the boundary flow via compatible similarity transformations and then employed to the Keller-box scheme for numerical results. The physical quantities of our concern including skin friction, Nusselt number, and Sherwood number along with velocity, temperature and concentration profile against involved effects are demonstrated. The impacts of the involved flow parameters are drawn in graphs and tabulated forms. The inclination effect shows an inverse relation with the velocity field. Moreover, the velocity profile increases with the growth of the buoyancy effect.
49
Chen, Mingtao, Bin Huang e Jianwen Zhang. "Blowup criterion for the three-dimensional equations of compressible viscous micropolar fluids with vacuum". Nonlinear Analysis: Theory, Methods & Applications 79 (março de 2013): 1–11. http://dx.doi.org/10.1016/j.na.2012.10.013.
Texto completo da fonte
50
YADAV, PRAMOD KUMAR, Ankit Kumar e A. N. FILIPPOV. "ANALYSIS OF ENTROPY PRODUCTION OF IMMISCIBLE MICROPOLAR AND NEWTONIAN FLUIDS FLOW THROUGH A CHANNEL: EFFECT OF THERMAL RADIATION AND MAGNETIC FIELD". Коллоидный журнал 85, n.º 1 (1 de janeiro de 2023): 101–21. http://dx.doi.org/10.31857/s0023291222700033.
Texto completo da fonteResumo:
This paper aims to analyze the thermal characteristics, entropy production, flow velocity and Bejan number profile for immiscible nature of micropolar and Newtonian viscous fluid within a channel. Here, the authors emphasize the influence of thermal radiation and oriented magnetic field on the thermal profile and entropy generation of two different types of non-miscible and incompressible micropolar and Newtonian fluids in a channel. The viscous dissipation and thermal radiation effect are also considered in the thermal energy equation. In this work, the entropy production is analyzed within a channel due to oriented magnetic field and thermal radiation. A constant pressure gradient acts on the entry zone of flow domain and static walls of the channel are isothermal. In this problem, we tried to simulate thermal radiation in energy equation by adopting the Rosseland’s diffusion approximation. According to geometrical configuration of the problem, the conditions of no-slip at the walls of the channel and continuity of thermal exchange, microrotation, shear stress, flow velocity and heat flux at the interface of immiscible fluids are used. The governing equations for the flow of immiscible fluids are solved by reliable technique and exact solution for thermal characteristics and flow field are evaluated. The mathematical results of thermal profile and flow characteristics are used to obtain the Bejan number profile as well as the entropy production number profile. The influence of various thermo-physical governing parameters such as radiation parameter, Reynolds number, inclination angle parameter, viscous dissipation parameter, micropolarity parameter and Hartmann number, which describe the physical significance of the present model, on the flow and thermal characteristics of the model are discussed graphically. The newly obtained results of this study are verified with previous published results.