Conecte-se

Bibliografias temáticas / Metals Fatigue / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Metals Fatigue.

Artigos de revistas sobre o tema "Metals Fatigue"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 26 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Metals Fatigue".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Correia, J. A. F. O., A. M. P. De Jesus, I. F. Pariente, J. Belzunce e A. Fernández-Canteli. "Mechanical fatigue of metals". Engineering Fracture Mechanics 185 (novembro de 2017): 1. http://dx.doi.org/10.1016/j.engfracmech.2017.10.029.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Polák, Jaroslav, Jiří Man e Ivo Kuběna. "The True Shape of Persistent Slip Markings in Fatigued Metals". Key Engineering Materials 592-593 (novembro de 2013): 781–84. http://dx.doi.org/10.4028/www.scientific.net/kem.592-593.781.

Texto completo da fonte

Resumo:

Persistent slip markings (PSMs) were experimentally studied in 316L steel fatigued to early stages of the fatigue life. High resolution SEM, combined with focused ion beam (FIB) technique and atomic force microscopy (AFM) were used to assess the true shape of PSMs in their early stage of development. General features of PSMs in fatigued metals are extrusions and intrusions. Their characteristic features were determined. They were discussed in relation with the theories of surface relief formation and fatigue crack initiation based on the formation, migration and annihilation of point defects in the bands of intensive cyclic slip - persistent slip bands (PSBs)

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Enomoto, Masatoshi. "Prediction of Fatigue Life for Light Metals and their Welded Metals". Materials Science Forum 794-796 (junho de 2014): 273–77. http://dx.doi.org/10.4028/www.scientific.net/msf.794-796.273.

Texto completo da fonte

Resumo:

A6N01 (6005C in ISO) base metal is applied for cantilever type fatigue test over 108 cyclic number. Fatigue strength decreases over 107 and after testing, new prediction formula of fatigue life at high cycle regeion which named YENs formula is proposed for light metal and their welded joints. This formula is shown as below. Log (σa/σp) =k Log (Nf-N0)+m σa is stress amplitude, σp is proof stress k is depend on stress concentration factor Nf is fatigue life without residual stress and No is discrepancy due to residual stress. m is material constant. This formula is a hypothesis and it is required to accumulate much more fatigue data for many kind of alloys and their welded joints.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

KAWAGOISHI, Norio, Qiang CHEN, Masahiro GOTO, Qingyuan WANG e Hironobu NISITANI. "Ultrasonic Fatigue Properties of Metals". Proceedings of Conference of Kyushu Branch 2003 (2003): 47–48. http://dx.doi.org/10.1299/jsmekyushu.2003.47.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

TROSHCHENKO, V. T. "Fatigue fracture toughness of metals". Fatigue & Fracture of Engineering Materials & Structures 32, n.º 4 (abril de 2009): 287–91. http://dx.doi.org/10.1111/j.1460-2695.2009.01343.x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Fonseca de Oliveira Correia, José António, Miguel Muñiz Calvente, Abílio Manuel Pinho de Jesus e Alfonso Fernández-Canteli. "ICMFM18-Mechanical fatigue of metals". International Journal of Structural Integrity 8, n.º 6 (4 de dezembro de 2017): 614–16. http://dx.doi.org/10.1108/ijsi-10-2017-0055.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Pineau, André, David L. McDowell, Esteban P. Busso e Stephen D. Antolovich. "Failure of metals II: Fatigue". Acta Materialia 107 (abril de 2016): 484–507. http://dx.doi.org/10.1016/j.actamat.2015.05.050.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Vinogradov, A., e S. Hashimoto. "Fatigue of Severely Deformed Metals". Advanced Engineering Materials 5, n.º 5 (16 de maio de 2003): 351–58. http://dx.doi.org/10.1002/adem.200310078.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Teng, N. J., e T. H. Lin. "Elastic Anisotropy Effect of Crystals on Polycrystal Fatigue Crack Initiation". Journal of Engineering Materials and Technology 117, n.º 4 (1 de outubro de 1995): 470–77. http://dx.doi.org/10.1115/1.2804741.

Texto completo da fonte

Resumo:

Fatigue bands have been observed in both monocrystalline and polycrystalline metals. Extrusions and intrusions at the free surface of fatigued specimens are favorable sites for fatigue crack nucleation. Previous studies (Lin and Ito, 1969; Lin, 1992) mainly concerned the fatigue crack initiation in aluminum and its alloys. The elastic anisotropy of individual crystals of these metals is insignificant and was accordingly neglected. However, the anisotropy of the elastic constants of some other metallic crystals, such as titanium and some intermetallic compounds, is not negligible. In this paper, the effect of crystal anisotropy is considered by using Eshelby’s equivalent inclusion method. The polycrystal analyzed is Ni3Al intermetallic compound. The plastic shear strain distributions and the cumulative surface plastic strain in the fatigue band versus the number of loading cycles were calculated, and the effect of crystal anisotropy on the growth of the extrusions was examined.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Lowe, Terry C. "Enhancing Fatigue Properties of Nanostructured Metals and Alloys". Advanced Materials Research 29-30 (novembro de 2007): 117–22. http://dx.doi.org/10.4028/www.scientific.net/amr.29-30.117.

Texto completo da fonte

Resumo:

Recent research on the fatigue properties of nanostructured metals and alloys has shown that they generally possess superior high cycle fatigue performance due largely to improved resistance to crack initiation. However, this advantage is not consistent for all nanostructured metals, nor does it extend to low cycle fatigue. Since nanostructures are designed and controlled at the approximately the same size scale as the defects that influence crack initiation attention to preexisting nanoscale defects is critical for enhancing fatigue life. This paper builds on the state of knowledge of fatigue in nanostructured metals and proposes an approach to understand and improve fatigue life using existing experimental and computational methods for nanostructure design.

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Chen, Rui, Hongqian Xue e Bin Li. "Comparison of SP, SMAT, SMRT, LSP, and UNSM Based on Treatment Effects on the Fatigue Properties of Metals in the HCF and VHCF Regimes". Metals 12, n.º 4 (10 de abril de 2022): 642. http://dx.doi.org/10.3390/met12040642.

Texto completo da fonte

Resumo:

This paper aims to provide a better understanding regarding the effects of shot peening (SP), surface mechanical attrition treatment (SMAT), laser shock peening (LSP), surface mechanical rolling treatment (SMRT), and ultrasonic nanocrystal surface modification (UNSM) on the fatigue properties of metals in high-cycle fatigue (HCF) and very-high-cycle fatigue (VHCF) regimes. The work in this paper finds that SMRT and UNSM generally improve the high-cycle and very-high-cycle fatigue properties of metals, while SP, SMAT, and LSP can have mixed effects. The differences are discussed and analyzed with respect to the aspects of surface finish, microstructure and microhardness, and residual stress. SMRT and UNSM generally produce a smooth surface finish, while SP and SMAT tend to worsen the surface finish on metals, which is harmful to their fatigue properties. In addition to inducing a plastic deformation zone and increasing microhardness, surface treatments can also generate a nanograin layer and gradient microstructure to enhance the fatigue properties of metals. The distribution of treatment-induced residual stress and residual stress relaxation can cause mixed effects on the fatigue properties of metals. Furthermore, increasing residual stress through SP and SMAT can cause further deterioration of the surface finish, which is detrimental to the fatigue properties of metals.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Balasubramanian, Shyam-Sundar, Chris Philpott, James Hyder, Mike Corliss, Bruce Tai e Wayne NP Hung. "Testing Techniques and Fatigue of Additively Manufactured Inconel 718 – A Review". International Journal of Engineering Materials and Manufacture 5, n.º 4 (20 de outubro de 2020): 156–94. http://dx.doi.org/10.26776/ijemm.05.04.2020.05.

Texto completo da fonte

Resumo:

Additive Manufacturing (AM) of metallic components shows unfavorable properties in their as-built state; surface roughness, anisotropy, residual stresses, and internal /surface defects are common issues that affect dynamic properties of AM metals. This paper reviews traditional fatigue testing techniques, summarizes published fatigue data for wrought and additively manufactured metals with focus on Inconel 718. Surface and volume defects of AM metals were presented and how post processing techniques could improve fatigue performance were shown. Different methods for normalizing fatigue data were explored due to varying results of different fatigue testing techniques.

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Szala, Grzegorz. "Influence of Stresses below the Fatigue Limit on Fatigue Life". Solid State Phenomena 224 (novembro de 2014): 45–50. http://dx.doi.org/10.4028/www.scientific.net/ssp.224.45.

Texto completo da fonte

Resumo:

According to the performed analysis of fatigue phenomena occurring in metals, the effects of fatigue appear in the form of lines and slip bands under loading conditions producing variable stresses with values below the fatigue limit of these metals. It is commonly accepted that variable stresses with constant amplitude of values below 0.4 of the fatigue limit do not cause plastic strain in grains (lines and slip bands), thus they do not affect the fatigue life. This study is an attempt of quantitative assessment of the influence of stresses with values below the fatigue limit on fatigue life by using tests with programed two-step loading (variable-amplitude). Tests were performed with the use of C45 steel specimens.

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Levitin, V. V., S. V. Loskutov, M. I. Pravda e B. A. Serpetsky. "WORK FUNCTION FOR FATIGUE TESTED METALS". Nondestructive Testing and Evaluation 17, n.º 2 (janeiro de 2001): 79–89. http://dx.doi.org/10.1080/10589750108953103.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Fatemi, Ali, Reza Molaei e Nam Phan. "Multiaxial Fatigue of Additive Manufactured Metals". MATEC Web of Conferences 300 (2019): 01003. http://dx.doi.org/10.1051/matecconf/201930001003.

Texto completo da fonte

Resumo:

Additive manufacturing (AM) has recently gained much interest from researchers and industry practitioners due to the many advantages it offers as compared to the traditional subtractive manufacturing methods. These include the ability to fabricate net shaped complex geometries, integration of multiple parts, on-demand fabrication, and efficient raw material usage, among other benefits. Some of distinguishing features of AM metals, as compared to traditional subtractive manufacturing methods, include surface roughness, porosity and lack of fusion defects, residual stresses due to the thermal history of the part during the fabrication process, and anisotropy of the properties. Most components made of AM processes are subjected to cyclic loads, therefore, fatigue performance is an important consideration in their usage for safety critical applications. In addition, the state of stress at fatigue critical locations are often multiaxial. Considering the fact that many of the distinguishing features of AM metals are directional, the subject of multiaxial fatigue presents an important study area for a better understanding of their fatigue performance. This paper presents an overview of the aforementioned issues using recent data generated using AM Ti-6Al-4V and 17-4 PH stainless steel. Specimens were made by laser-based powder bed fusion and subjected to axial, torsion, and in-phase as well as out-of-phase loadings. A variety of conditions such as surface roughness, thermo-mechanical treatment, and notch effects are included. Many aspects are considered including damage mechanisms and crack paths, cyclic deformation, fatigue crack nucleation and growth, and stress concentration effects.

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Wang, Shengping, Yongjun Li, Mei Yao e Renzhi Wang. "Fatigue limits of shot-peened metals". Journal of Materials Processing Technology 73, n.º 1-3 (janeiro de 1998): 57–63. http://dx.doi.org/10.1016/s0924-0136(97)00212-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

MUGHRABI, H. "Cyclic plasticity and fatigue of metals". Le Journal de Physique IV 03, n.º C7 (novembro de 1993): C7–659—C7–668. http://dx.doi.org/10.1051/jp4:19937105.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Kabaldin, Yu G. "Nanostructuring of metals in fatigue loading". Russian Engineering Research 28, n.º 6 (junho de 2008): 559–65. http://dx.doi.org/10.3103/s1068798x08060105.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Omar, M. K., A. G. Atkins e J. K. Lancaster. "The adhesive-fatigue wear of metals". Wear 107, n.º 3 (fevereiro de 1986): 279–85. http://dx.doi.org/10.1016/0043-1648(86)90230-9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

MOTZ, C., O. FRIEDL e R. PIPPAN. "Fatigue crack propagation in cellular metals". International Journal of Fatigue 27, n.º 10-12 (outubro de 2005): 1571–81. http://dx.doi.org/10.1016/j.ijfatigue.2005.06.044.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Bowman, M. D., G. E. Nordmark e J. T. P. Yao. "Fuzzy logic approach in metals fatigue". International Journal of Approximate Reasoning 1, n.º 2 (abril de 1987): 197–219. http://dx.doi.org/10.1016/0888-613x(87)90014-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Schleinkofer, U., H. G. Sockel, K. Go¨rting e W. Heinrich. "Fatigue of hard metals and cermets". Materials Science and Engineering: A 209, n.º 1-2 (maio de 1996): 313–17. http://dx.doi.org/10.1016/0921-5093(95)10106-3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Liu, Dan, Dirk John Pons e E. H. Wong. "Creep-integrated fatigue equation for metals". International Journal of Fatigue 98 (maio de 2017): 167–75. http://dx.doi.org/10.1016/j.ijfatigue.2016.11.030.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Itoh, Y. Z., e H. Kashiwaya. "Low-Cycle Fatigue Properties of Steels and Their Weld Metals". Journal of Engineering Materials and Technology 111, n.º 4 (1 de outubro de 1989): 431–37. http://dx.doi.org/10.1115/1.3226491.

Texto completo da fonte

Resumo:

Completely reversed, strain-controlled, low-cycle fatigue behavior at room temperature is investigated for steels and their weld metals. Weld metal specimens were taken from multi-pass weld metal deposited by shield metal arc welding (SMAW) and gas metal arc welding (GMAW), such that their gage length consisted entirely of the weld metal. Results indicate that there is a trend toward reduction in the low-cycle fatigue life of weld metals as compared with the base metals. In low carbon steel weld metals, the tendency described above is explained in terms of local plastic strain concentration by lack of uniformity of the multi-pass weld metals. The weld metals do not have the same mechanical properties anywhere as confirmed by hardness distribution, and the fatigue crack grows preferentially through the temper softened region in the multi-pass welds. In Type 308 stainless steel weld metals, the ductility reduction causes reductions in low-cycle fatigue life. This study leads to the conclusion that fairly accurate estimates of the low-cycle fatigue life of weld metals can be obtained using Manson’s universal slope method. However, life estimates of the Type 304 stainless steel is difficult due to a lack of ductility caused by a deformation-induced martensitic transformation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Rajmane, Umesh C. "Review of Equal Channel Angular Pressing System". Asian Review of Mechanical Engineering 5, n.º 2 (5 de novembro de 2016): 11–13. http://dx.doi.org/10.51983/arme-2016.5.2.2417.

Texto completo da fonte

Resumo:

Equal channel angular pressing (ECAP) is a forming procedure. The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can be processed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metals in terms of tensile strength, stress-controlled fatigue strength, and fatigue crack growth resistance. The Equal Channel Angular Pressing is a hardening treatment with which ductile metals can be processed to refine their grain and sub-grain structure. This process enhances the mechanical strength of metals in terms of tensile strength, stress-controlled fatigue strength, and fatigue crack growth resistance. In this review, underline some critical aspects that have to be more investigated.

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Matsuno, Hiroshi. "Fatigue Strength of Metals Containing Inclusions and Phase Inhomogeneity". Key Engineering Materials 353-358 (setembro de 2007): 1090–93. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.1090.

Texto completo da fonte

Resumo:

Fatigue strength data of metals are picked up from literature and rearranged on the basis of the equivalent stress ratio which has previously been proposed by the author. The characteristics of fatigue strength are especially investigated for metals containing nonmetallic inclusions and phase in-homogeneity. As a result, it is found that σ w2 -type fatigue strength is often exhibited even in a specimen without a notch and it leads to a wide range of scattering of fatigue strength of unnotched specimens.

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Gräfe, Wolfgang. "Fatigue of Cellulose Acetate and Ductile Metals". Advanced Materials Research 1154 (junho de 2019): 112–21. http://dx.doi.org/10.4028/www.scientific.net/amr.1154.112.

Texto completo da fonte

Resumo:

By a theoretical consideration of a viscous body it has been deduced a formula for the description of the fatigue properties of ductile metals and plastic materials. This formula has been compared with experimental fatigue data of Wöhler-curves (S-N curves). For cellulose acetate, iron, copper, nickel, silver, zinc and, to a restricted degree, also for aluminum a sufficient accordance between the experimental data and the theoretical curves has been reached. With this procedure it is possible to determine fatigue limits for these materials. Similar results are obtained for the creep of brass. It is supposed that the cause of the fatigue limit is the near surface stress of the specimen.

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Cavaliere, Pasquale. "Low Cycle Fatigue of Electrodeposited Pure Nanocrystalline Metals". Materials Science Forum 561-565 (outubro de 2007): 1299–302. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.1299.

Texto completo da fonte

Resumo:

The fatigue behavior of metals is strongly governed by the grain size variation. As the tensile strength, the fatigue limit increases with decreasing grain size in the microcrystalline regime. A different trend in mechanical properties has been demonstrated in many papers for metals with ultrafine (< 1 m) and nanocrystalline (< 100 nm) grain size in particular in the yield stress and fatigue crack initiation and growth. The fatigue behavior of electrodeposited nanocrystalline Ni (20 and 40 nm mean grain size) and nanocrystalline Co (20 nm) has been analyzed in the present paper by means of stress controlled tests. The monothonic mechanical properties of the materials were obtained from tensile tests by employing an Instron 5800 machine by measuring the strain with an extensometer up to 2.5% maximum strain. The strain gage specimen dimensions measured 20 mm length and 5 mm width, all the specimens were produced by electro-discharge machining. The low cycle fatigue tests were performed with specimens of the same geometry of the tensile ones in tension-tension with load ratio R=0.25. The fatigue crack propagation experiments were carried out by employing single edge notched specimens measuring 39 mm in length, 9.9 mm in width and with an electro-discharge machined edge-notch of 1 mm. All the endurance fatigue and crack propagation tests were performed at 10 Hz.

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Arakawa, Jinta, Tatsuya Hanaki, Yoshiichirou Hayashi, Hiroyuki Akebono e Atsushi Sugeta. "Effect of surface compressive residual stress introduced by surface treatment on fatigue properties of metallic material". MATEC Web of Conferences 165 (2018): 18006. http://dx.doi.org/10.1051/matecconf/201816518006.

Texto completo da fonte

Resumo:

This study considers shakedown in evaluating the fatigue limit of metals with compressive residual stress at the surface. We begin by applying tension-compression fatigue tests to ASTM CA6NM under conditions of controlled load and displacement to obtain fatigue limit diagram in compressive mean stress. The results imply that shakedown occurs under the condition of controlled displacement, therefore, shakedown should be considered when evaluating the fatigue limit of metals with compressive residual stress at the surface.

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Ihara, C., e T. Misawa. "Stochastic Models Related to Fatigue Damage of Materials". Journal of Energy Resources Technology 113, n.º 4 (1 de dezembro de 1991): 215–21. http://dx.doi.org/10.1115/1.2905903.

Texto completo da fonte

Resumo:

The stochastic models for the fatigue damage phenomena are proposed. They describe the uncertainty caused by inhomogeneity of materials for fatigue crack propagation of metals and fatigue damage of carbon fiber composite (CFRP). The models are given by the stochastic differential equations derived from the randomized Paris-Erdogan’s fatigue crack propagation law and Kachonov’s equation of fatigue damage. The sample paths and life distribution of fatigue crack propagation in metals or of damage accumulation in CFRP are obtained by using the solution of the stochastic differential equation and the probability density function, respectively. These theoretical results are compared with the actual experiments—fatigue crack propagation of high tensile strength steel APFH 60 and fatigue test for a carbon eight-harness-satin/epoxy laminate—through numerical experiments.

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Alderiesten, René. "Fatigue in fibre metal laminates: The interplay between fatigue in metals and fatigue in composites". Fatigue & Fracture of Engineering Materials & Structures 42, n.º 11 (26 de fevereiro de 2019): 2414–21. http://dx.doi.org/10.1111/ffe.12995.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Soyama, Hitoshi, Michela Simoncini e Marcello Cabibbo. "Effect of Cavitation Peening on Fatigue Properties in Friction Stir Welded Aluminum Alloy AA5754". Metals 11, n.º 1 (30 de dezembro de 2020): 59. http://dx.doi.org/10.3390/met11010059.

Texto completo da fonte

Resumo:

Friction stir welding (FSW) is an attractive solid-state joining technique for lightweight metals; however, fatigue properties of FSWed metals are lower than those of bulk metals. A novel mechanical surface treatment using cavitation impact, i.e., cavitation peening, can improve fatigue life and strength by introducing compressive residual stress into the FSWed part. To demonstrate the enhancement of fatigue properties of FSWed metal sheet by cavitation peening, aluminum alloy AA5754 sheet jointed by FSW was treated by cavitation peening using cavitating jet in air and water and tested by a plane bending fatigue test. The surface residual stress of the FSWed part was also evaluated by an X-ray diffraction method. It was concluded that the fatigue life and strength of FSWed specimen were improved by cavitation peening. Whereas the fatigue life at σa = 150 MPa of FSWed specimen was about 1/20 of the bulk sheet, cavitation peening was able to extend the fatigue life of the non-peened FSW specimen by 3.6 times by introducing compressive residual stress into the FSWed part. This is the first paper to demonstrate the improvement of fatigue properties of FSWed metallic sheet by cavitation peening.

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Hajshirmohammadi, Behnam, e Michael M. Khonsari. "Application of thermoelectricity in fatigue of metals". Fatigue & Fracture of Engineering Materials & Structures 44, n.º 5 (25 de janeiro de 2021): 1162–77. http://dx.doi.org/10.1111/ffe.13421.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Li, Xiaoyan, Ming Dao, Christoph Eberl, Andrea Maria Hodge e Huajian Gao. "Fracture, fatigue, and creep of nanotwinned metals". MRS Bulletin 41, n.º 4 (abril de 2016): 298–304. http://dx.doi.org/10.1557/mrs.2016.65.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Becker, Thorsten Hermann, Punit Kumar e Upadrasta Ramamurty. "Fracture and fatigue in additively manufactured metals". Acta Materialia 219 (outubro de 2021): 117240. http://dx.doi.org/10.1016/j.actamat.2021.117240.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Balasubramanian, Shyam-Sundar, Chris Philpott, James Hyder, Mike Corliss, Bruce Tai e Wayne Hung. "Novel Fatigue Tester for Additively Manufactured Metals". Procedia Manufacturing 53 (2021): 525–34. http://dx.doi.org/10.1016/j.promfg.2021.06.054.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Vincent, Alain, e Roger Fougères. "Fatigue and Internal Friction of FCC Metals". Materials Science Forum 119-121 (janeiro de 1993): 69–82. http://dx.doi.org/10.4028/www.scientific.net/msf.119-121.69.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

SEKI, Hironori, Masakazu TANE e Hideo NAKAJIMA. "Fatigue Strength of Lotus-type Porous Metals". Journal of High Temperature Society 34, n.º 2 (2008): 56–59. http://dx.doi.org/10.7791/jhts.34.56.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

McDowell, David L. "Multiaxial small fatigue crack growth in metals". International Journal of Fatigue 19, n.º 93 (junho de 1997): 127–35. http://dx.doi.org/10.1016/s0142-1123(97)00014-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Tirosh, Jehuda, e Sharon Peles. "Bounds on the fatigue threshold in metals". Journal of the Mechanics and Physics of Solids 49, n.º 6 (junho de 2001): 1301–22. http://dx.doi.org/10.1016/s0022-5096(00)00076-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Luong, M. P. "Infrared thermographic scanning of fatigue in metals". Nuclear Engineering and Design 158, n.º 2-3 (setembro de 1995): 363–76. http://dx.doi.org/10.1016/0029-5493(95)01043-h.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

KANAZAWA, Kenji. "How Dose Fatigue Fracture Occur in Metals?" Journal of the Japan Society for Precision Engineering 73, n.º 3 (2007): 322–25. http://dx.doi.org/10.2493/jjspe.73.322.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

HANLON, T., E. TABACHNIKOVA e S. SURESH. "Fatigue behavior of nanocrystalline metals and alloys". International Journal of Fatigue 27, n.º 10-12 (outubro de 2005): 1147–58. http://dx.doi.org/10.1016/j.ijfatigue.2005.06.035.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Makkonen, M. "Predicting the total fatigue life in metals". International Journal of Fatigue 31, n.º 7 (julho de 2009): 1163–75. http://dx.doi.org/10.1016/j.ijfatigue.2008.12.008.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Romaniv, O. N., B. N. Andrusiv e V. I. Borsukevich. "Crack formation in fatigue of metals (review)". Soviet Materials Science 24, n.º 1 (1988): 1–10. http://dx.doi.org/10.1007/bf00722573.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Gonçalves, Camilla de Andrade, José Alexander Araújo e Edgar Nobuo Mamiya. "A simple multiaxial fatigue criterion for metals". Comptes Rendus Mécanique 332, n.º 12 (dezembro de 2004): 963–68. http://dx.doi.org/10.1016/j.crme.2004.09.003.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

NICOLETTO, G. "Plastic zones about fatigue cracks in metals". International Journal of Fatigue 11, n.º 2 (março de 1989): 107–15. http://dx.doi.org/10.1016/0142-1123(89)90005-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Troshchenko, V. T. "Nonlocalized fatigue damage to metals and alloys". Materials Science 42, n.º 1 (janeiro de 2006): 20–33. http://dx.doi.org/10.1007/s11003-006-0054-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Zhou, Xiaoling, Xiaoyan Li e Changqing Chen. "Atomistic mechanisms of fatigue in nanotwinned metals". Acta Materialia 99 (outubro de 2015): 77–86. http://dx.doi.org/10.1016/j.actamat.2015.07.045.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Weiss, Menachem P., e Erel Lavi. "Fatigue of metals – What the designer needs?" International Journal of Fatigue 84 (março de 2016): 80–90. http://dx.doi.org/10.1016/j.ijfatigue.2015.11.013.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!