Bibliografias temáticas / Metals analysis

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Metals analysis"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 1 de agosto de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Metals analysis".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Metals analysis"

Laurinaitis, Domas, e Aušra Zigmontienė. "RESEARCH ANALYSIS OF VERMICOMPOST INFLUENCE ON BIOACCUMULATION OF HEAVY METALS IN COMMON MEADOW-GRASS (POA PRATENSIS) / VERMIKOMPOSTO ĮTAKOS SUNKIŲJŲ METALŲ BIOAKUMULIACIJAI PIEVINĖJE MIGLĖJE (POA PRATENSIS) TYRIMŲ ANALIZĖ". Mokslas – Lietuvos ateitis 8, n.º 4 (24 de outubro de 2016): 376–81. http://dx.doi.org/10.3846/mla.2016.953.

Texto completo da fonte

Resumo:

The more intensive growth of agricultural crops adding mineral fertilizers, environmental pollution make the soil degraded: reduce the fertility of soil, increase the concentration of heavy metals. Especially dangerous is a common, synergistic effect of heavy metals. Vermicompost optimizes pH, texture and organic material content – the soil indicators, which are the major contributors to migration of heavy metals in the soil and to the plants from it. In the article there is an investigation of vermicompost influence on bioaccumulation of heavy metals in common meadow-grass. After experimental research it is determined that immobilization of heavy metals was the best in soil-vermicompost substrate, prepared in a ratio 1:2. The cadmium (Cd) concentrations were lowest and the difference of HM content determined between roots and shoots was the most in biomass grown up in that mixture. In the underground part of plant the concentration equal to 11.10 mg/kg and in the part of above ground – 1.05 mg/kg. The situation of lead (Pb) and copper (Cu) is analogous. This is the optimal ratio of mixture preparation. Intensyvesnis žemės ūkio kultūrų auginimas, tręšiant mineralinėmis trąšomis, aplinkos tarša nualina dirvožemį: sumažėja dirvožemio derlingumas, didėja sunkiųjų metalų koncentracijos. Ypač pavojingas bendras, sinergetinis sunkiųjų metalų poveikis. Vermikompostas optimizuoja dirvožemio pH, granuliometrinę sudėtį, organinės medžiagos kiekį – rodiklius, nuo kurių labiausiai priklauso sunkiųjų metalų migracija dirvožemyje ir iš jo į augalus. Straipsnyje nagrinėjama vermikomposto įtaka sunkiųjų metalų bioakumuliacijai pievinėje miglėje. Atlikus eksperimentinį tyrimą nustatyta, kad geriausiai sunkiuosius metalus „surakino“ dirvožemio-vermikomposto substratas, paruoštas santykiu 1:2. Tame mišinyje užaugintoje biomasėje kadmio (Cd) koncentracijos buvo mažiausios, o skirtumas tarp SM kiekio nustatyto šaknyse ir ūgliuose didžiausias. Požeminėje augalo dalyje koncentracija lygi 11,10 mg/kg, o antžeminėje – 1,05 mg/kg. Švino (Pb) ir vario (Cu) atvejais situacija yra analogiška. Tai optimalus mišinio ruošimo santykis.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Okochi, Haruno. "Chemical analysis of metals." Bulletin of the Japan Institute of Metals 26, n.º 7 (1987): 683–86. http://dx.doi.org/10.2320/materia1962.26.683.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Moore, Glyn. "Analysis of precious metals". TrAC Trends in Analytical Chemistry 11, n.º 6 (junho de 1992): XVII—XVIII. http://dx.doi.org/10.1016/0165-9936(92)80052-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Watkins, Clinton, e Michael McAleer. "Cointegration analysis of metals futures". Mathematics and Computers in Simulation 59, n.º 1-3 (maio de 2002): 207–21. http://dx.doi.org/10.1016/s0378-4754(01)00409-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oliveira Brett, Ana Maria, Christopher M. A. Brett, Frank-Michael Matysik e Silke Matysik. "Sonoelectrochemical analysis of trace metals". Ultrasonics Sonochemistry 4, n.º 2 (abril de 1997): 123–24. http://dx.doi.org/10.1016/s1350-4177(97)00015-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Burkhanov, G. S. "Physicochemical analysis in metals science". Russian Journal of Inorganic Chemistry 55, n.º 11 (novembro de 2010): 1703–13. http://dx.doi.org/10.1134/s0036023610110082.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pridhvi Krishna, Gaddey, e Raja Sundararajan. "A REVIEW ON MULTI-ELEMENT ANALYSIS OF DIFFERENT SAMPLES BY ICP-OES". YMER Digital 21, n.º 06 (16 de junho de 2022): 461–83. http://dx.doi.org/10.37896/ymer21.06/45.

Texto completo da fonte

Resumo:

Heavy metals over acceptable limits established by the world health organization can source complications to human beings and animal life in the environment. Several analytical approaches have been established to screen the air, water, food quality by tracing different heavy metal ions in samples. The review work begins with the introduction of pharmaceutical analysis, including metal's effect on the body and various instruments used in the heavy metal determination. The potential of ICP-OES to sense heavy metal ions was discussed. This review article provides an impression of the metals present in the environment and their detection through ICP-OES. In addition, recapitulates the body of work on heavy metal determination in the previous years using ICP-OES. The strengths and limitations of ICPOES have also been conversed. The review illustrates that ICP-OES has great prospective in heavy metal ion determination. Keywords: ICP-OES, Heavy elements, Multi-element determination, Plasma, Metals

Estilos ABNT, Harvard, Vancouver, APA, etc.

Akyuz, Burak, e Don McKay. "Quantitative Chemical Analysis of Metals in Failure Analysis". Journal of Failure Analysis and Prevention 22, n.º 1 (fevereiro de 2022): 108–12. http://dx.doi.org/10.1007/s11668-021-01327-z.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Jones, Reese E., Jeremy A. Templeton, Gregory J. Wagner, David Olmsted e Nomand A. Modine. "Electron transport enhanced molecular dynamics for metals and semi-metals". International Journal for Numerical Methods in Engineering 83, n.º 8-9 (19 de março de 2010): 940–67. http://dx.doi.org/10.1002/nme.2857.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lugli, Francesco, e Claudio Fernando Mahler. "Phytoremediation of Metals: A Numerical Analysis". International Journal of Phytoremediation 17, n.º 3 (14 de novembro de 2014): 242–48. http://dx.doi.org/10.1080/15226514.2014.883495.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Metals analysis"

Naidoo, Dhesigen P. "Metals and the conformation of fibrin". Master's thesis, University of Cape Town, 1992. http://hdl.handle.net/11427/26555.

Texto completo da fonte

Resumo:

The carboxy terminal of the γ-chain of human fibrinogen contains at least three biologically. important functional domains: (i) the fibrinogen γ-chain polymerisation centre, (ii) the platelet receptor domain and (iii) the site for staphyloccocal clumping. The nature of the site specificity of these interactions necessitates the existence of a preferred conformation for this region, the nature of which has yet to be clearly established. A novel zinc metalloproteinase isolated from puff adder venom (PAV protease) capable of specifically cleaving the di-γ-chain of transglutaminase (Factor XIIIa) catalysed crosslinked plasmin derived D-dimer into apparently symmetrical monomers has been described. The activity is fibrin specific and displays an unusual site specificity for the γ-carboxy terminal domains within the crosslink region. The activity was reported to be potentiated by zinc. The effect of zinc on the digestion of D-dimer by PAV protease was evaluated by SDS-PAGE and by a fluorimetric technique utilising a fluorescent dansylcadaverine conjugate of the substrate (f-D-dimer). A differential zinc binding study determined that the potentiation of activity by zinc was due to a zinc-substrate rather than a zinc-enzyme interaction. The binding constant for zinc to D-dimer was determined by Scatchard analysis of zinc titration data. The interaction of zinc and f-D-dimer was confirmed by fluorescence anisotropy determinations. The nature of the coordination capsule around the metal cation was determined by examining a cobalt-fibrin-D-dimer complex and characterising the difference visible absorption spectrum thereof. The donor ligands from the D-dimer fragment for the metal ion were determined as histidines by examining zinc(II) and cobalt(II) binding to diethylpyrocarbonate modified fibrin-D-dimer and hydroxylamine treated DEPC-fibrin-D-dimer. Through this study it has been established that the PAV protease cleavage of the di-γ-chain of the plasmin derived D-dimer fragment is potentiated by zinc(II) ions through the formation of a novel zinc determined conformation of fibrin-D-dimer. This presents the possibility of a fibrinspecific neo-epitope being manifested in the presence of zinc ions that could provide a means to determine fibrin degradation products more specifically. A model for the neo-epitope has been proposed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kocak, Ozgur. "Analysis Of The Formability Of Metals". Master's thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/1178714/index.pdf.

Texto completo da fonte

Resumo:

Workpieces during cold forging fail basically due to ductile fracture. Ductile fracture can be predicted by damage models. In this study, various damage models such as Cockcroft &
Latham, McClintock, Freudenthal, Rice &
Tracy, Oyane, Ayada, Brozzo are investigated for their applicability to three workpiece materials: bearing steel (100Cr6), stainless steel (X5CrNiMo1810) and brass (CuZn39). The damage material parameters have been obtained by various tests such as tensile, standard compression, ring compression, compression with flanges and conical compression tests. The characterization has been assisted by finite element simulation of the various tests. It has been shown that the available damage models can predict the location of failure satisfactorily but are no able to predict the onset of failure quantitatively. Keywords: Formability Limit, Failure Criteria, Cold Forming, Surface Cracks, Finite Element Analysis

Estilos ABNT, Harvard, Vancouver, APA, etc.

Thuramalla, Naveen. "Multiscale modeling and analysis of failure and stability during super plastic deformation -- under different loading conditions". Lexington, Ky. : [University of Kentucky Libraries], 2004. http://lib.uky.edu/ETD/ukymeen2004t00171/NAVEEN.pdf.

Texto completo da fonte

Resumo:

Thesis (m.s.)--University of Kentucky, 2004.
Title from document title page (viewed Jan. 5, 2005). Document formatted into pages; contains x, 112p. : ill. Includes abstract and vita. Includes bibliographical references.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dangolle, Champa D. P. "Some aspects of trace analysis of metals". Thesis, Queen's University Belfast, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.318885.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mirmasoudi, Sara. "High Temperature Transient Creep Analysis of Metals". Wright State University / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=wright1452693927.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lambidis, Elisavet. "Synthesis and photophysical studies of metal complexes for biological applications /Lambidis Elisavet". HKBU Institutional Repository, 2017. http://repository.hkbu.edu.hk/etd_oa/346.

Texto completo da fonte

Resumo:

Nowadays the necessity for designing and synthesizing novel imaging agents increases rapidly. The long wavelength, and thus, low energy, of excitation and emission, and the good specificity and stability are examples of essential characteristics of ideal diagnostic and therapeutic agents. In this work, the synthesis and photophysical studies of metal complexes for biological applications were performed and evaluated, and it contained the development of (a) a porphyrin probe for imaging and treatment and (b) a tripodal thermal sensor for imaging. The research and study of the two cases of complex is analyzed in the second and third chapters, respectively, which follow the introduction or literature review to the diagnostic and/ or therapeutic agents which is given with examples in the first chapter. The scope of the main project, which is analysed in the second chapter, was the development and synthesis of a porphyrin-based bio-probe capable of bacterial fluorescence imaging. The porphyrin moiety of a complex is also able to generate singlet oxygen and this effect can be used for treatment purposes (PDT, Photodynamic Therapy). Thus, the complex can act as a diagnostic and therapeutic (anti-bacterial in this case) agent simultaneously. A probe with such a dual capability is known as theranostic agent. A theranostic agent is crucial for the enhancement and expansion of personalised medicine. The studies and physical measurements of the proposed, synthesised porphyrin complex have proved its capability to be used as a theranostic probe. Furthermore, after coupling the porphyrin moiety firstly with a small protein part (ampetoid: antimicrobial peptoid) and secondly with a radionuclide (Gallium-68), the in vitro and in vivo studies have to be performed. The aim of the project analysed in the third chapter was the development of a thermal sensor. Coordination of a tripodal ligand with a mixture of two lanthanides in various ratios was achieved and the photophysical measurements of the resulted complexes were evaluated. Lanthanide metals were chosen due to their unique photophysical properties that they offer when they are connected to an organic chomophoric ligand. Additionally, the preferred final luminophore product would obey a thermostable structure over a wide temperature range and it would be capable of effectively sensing the alterations in temperature. These properties were true for the ratio 99.5:0.5 for Terbium: Europium, and thus, the complex with such a consistency clarified the final product. Furthermore, the highly promising results after repeatedly photophysical (especially emission) measurements could conclude that the complex can be served as an ideal thermal sensor. Additional emission measurements at higher temperatures have to be done in order to confirm the ability of the proposed thermal sensor to be used for bio-imaging purposes. In conclusion, two-kind of metal complexes for biological applications were synthesized and their photophysical properties were assessed. Both the bulky porphyrin complex and the smaller tripodal ligand have shown promising results for their proposed applications. Of course, a more detailed assessment is required to verify their capability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Al-Attar, A. F. "Selenium and trace metals as pollutants". Thesis, University of Bristol, 1987. http://hdl.handle.net/1983/1858b91b-362e-422f-b91c-84aa44e23e90.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sadjadi, Seyedabdolreza. "Ab initio relativistic-consistent calculations and charge density and experimental mass-spectroscopic analysis of mono and poly-nuclearclusters of group 11 and 12 transition metals and metal chlorides: ySeyedabdolreza Sadjadi". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hub.hku.hk/bib/B5060577X.

Texto completo da fonte

Resumo:

The electron density function of molecular systems supplies a package of information. Quantum mechanical methods of producing and analyzing this function have been significantly improved during the past few years. The advent of accurate pseudopotentials and corresponding basis sets for Kohn-Sham density functional and for post-Hartree-Fock electron-correlated approaches have enabled the inclusion of scalar relativistic and spin-orbit coupling effects as well as electron correlation effects into the electron density function. The unpacking of the information embedded in such a function via the quantum theory of atoms in molecules (QTAIM) became possible by utilizing the very new subshell fitting method of reconstructing the density distribution of core electrons that had been replaced by the pseudopotentials. These theoretical advances were applied in this thesis to characterize and explore the topological features of metal-metal bonding as one of the fundamental types of bonds formed between two elements. Group 11 and 12 transition metals which include gold and mercury as the most relativistic elements were the main focus of this work. Mono and poly-nuclear compounds (with up to 4 metal atoms) in both pure metal clusters and chloro-complexes were studied by ab initio MØller-Plesset perturbation calculations followed by QTAIM analysis on the relaxed density. Some of these chloro-complexes of copper, gold, zinc and cadmium metals were identified in the gas phase by mass spectrometric experiments. The general formulas of the set of molecules studied in group 11 were : M2, MCl, MCl+, MCl2, MCl2+, M2Cl+, M2Cl2^(s+), M2Cl3+, M3Cl2+, M3Cl3+, M3Cl5+, M4Cl5+ and M4Cl7+ and in group 12 were : M2, MCl, MCl+, MCl2, M2Cl3+, M3Cl5+, M4Cl7+ and M2^(s+). The topological features of metal-metal bonding were calculated along with atomic properties for each individual local minimum isomer found. The comparison of the metal-metal bonding within the complexes and with the dimers revealed new features of metal-metal bonding in 3d, 4d and 5d transition metal elements of groups 11 and 12. With the aid of strong correlation between bond dissociation energy and electron density at the location of the bond critical points found in the case of dimers, the strength of the metal-metal bonding in the complexes was estimated. The electron density’s basin properties calculated accurately for all the clusters and their isomers in this thesis provided more insight also into the nature of M-Cl bondings in the group 11 and 12 chloride clusters. Ultimately the bonding information was used to predict the viability of these clusters in the gas phase.
published_or_final_version
Chemistry
Doctoral
Doctor of Philosophy

Estilos ABNT, Harvard, Vancouver, APA, etc.

Jones, Matthew Kenneth. "Multiscale Analysis of Void Coalescence in Ductile Metals". MSSTATE, 2004. http://sun.library.msstate.edu/ETD-db/theses/available/etd-11112004-165827/.

Texto completo da fonte

Resumo:

A mulitscale approach is used to model the coalescence of voids. At the microscale, cylindrical and spherical voids in nickel and the magnesium alloy AM60 are simulated through finite element analyses. The nickel cylindrical void simulations are compared to a set of experiments to validate this micromechanical finite element approach used to study void coalescence. At the macroscale, the coalescence portion of a microstructure-property material model is modified to reflect the behavior of three-dimensional spherical voids using results from the micromechanical simulations. An analysis of an automotive component illustrates the influence of void coalescence at the structural scale.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bond, Philip Harvey. "Analysis of flexible interlayers between metals and ceramics". Thesis, University of Nottingham, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282713.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Metals analysis"

Coyle, FT, ed. Chemical Analysis of Metals. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1987. http://dx.doi.org/10.1520/stp944-eb.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Colangelo, Vito J. Analysis of metallurgical failures. 2^a ed. New York: Wiley, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

E, Leese Gail, Socie Darrell e Society of Automotive Engineers. Fatigue Design and Evaluation Committee., eds. Multiaxial fatigue: Analysis and experiments. Warrendale, PA: Society of Automotive Engineers, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

J, Comer Jess, e Handrock James L, eds. Fundamentals of metal fatigue analysis. Englewood Cliffs, N.J: Prentice Hall, 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Łobinski, Ryszard. Spectrochemical trace analysis for metals and metalloids. New York: Ellis Horwood, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dulski, Thomas R. Trace elemental analysis of metals: Methods and techniques. New York: Marcel Dekker, 1999.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Csuros, Maria. Environmental sampling and analysis for metals. Boca Raton, Fla: Lewis, 2002.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

M, Ehrenreich Robert, University of Pennsylvania. University Museum of Archaeology and Anthropology. e University of Pennsylvania. Museum Applied Science Center for Archaeology., eds. Metals in society: Theory beyond analysis. Philadelphia: MASCA, the University Museum of Archaeology and Anthropology, University of Pennsylvania, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

M, Ehrenreich Robert, ed. Metals in society: Theory beyond analysis. Philadelphia: MASCA, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

T, Coyle Francis, e American Society for Testing and Materials. Committee E-3 on Chemical Analysis of Metals., eds. Chemical analysis of metals: A symposium. Philadelphia, PA: American Society for Testing and Materials, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Metals analysis"

Švancara, Ivan, e Zuzana Navrátilová. "Metals". In Environmental Analysis by Electrochemical Sensors and Biosensors, 781–825. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-1301-5_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zoecklein, Bruce W., Kenneth C. Fugelsang, Barry H. Gump e Fred S. Nury. "Metals, Cations, and Anions". In Wine Analysis and Production, 199–208. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4757-6967-8_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zoecklein, Bruce W., Kenneth C. Fugelsang, Barry H. Gump e Fred S. Nury. "Metals, Cations, and Anions". In Wine Analysis and Production, 199–208. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-6978-4_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Boubaker, Moez Ben, Donald Picard, Carl Duchesne, Jayson Tessier, Houshang Alamdari e Mario Fafard. "Non-Destructive Testing of Baked Anodes Based on Modal Analysis and Principal Component Analysis". In Light Metals 2017, 1289–98. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51541-0_154.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lauzon-Gauthier, Julien, Carl Duchesne e Jayson Tessier. "Texture Analysis of Anode Paste Images". In Light Metals 2014, 1123–26. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888438.ch187.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lauzon-Gauthier, Julien, Carl Duchesne e Jayson Tessier. "Texture Analysis Of Anode Paste Images". In Light Metals 2014, 1123–28. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48144-9_187.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Belt, Cynthia K. "Business Analysis of Total Refractory Costs". In Light Metals 2011, 1205–10. Cham: Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48160-9_204.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Leosson, Kristjan, Rauan Meirbekova, Sveinn Hinrik Gudmundsson e Georges Salloum-Abou-Jaoude. "Continuous Chemical Analysis of Molten Aluminum". In Light Metals 2022, 723–27. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92529-1_95.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Belt, Cynthia K. "Business Analysis of Total Refractory Costs". In Light Metals 2011, 1205–10. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118061992.ch204.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Aarhaug, Thor A., Kalman Nagy e Kieran G. Smith. "Potentiometric Fluoride Analysis with Improved Analytical Performance". In Light Metals 2012, 769–72. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48179-1_132.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Metals analysis"

Vander Wal, Randall L., Thomas M. Ticich e Joseph R. West, Jr. "Laser-induced breakdown spectroscopy of trace metals". In Laser Applications to Chemical and Environmental Analysis. Washington, D.C.: OSA, 2001. http://dx.doi.org/10.1364/lacea.2000.sud3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cremers, D. A. "Elemental Analysis of Metals at Distances up to 2.4 Meters Using Laser-Induced Breakdown Spectroscopy". In Laser Applications to Chemical Analysis. Washington, D.C.: Optica Publishing Group, 1987. http://dx.doi.org/10.1364/laca.1987.wa4.

Texto completo da fonte

Resumo:

The laser spark has been used extensively in the laboratory to provide an elemental analysis of metals.1 This method, called Laser-Induced Breakdown Spectroscopy (LIBS)2, uses a laser spark to vaporize and excite a material. The spark light is then spectrally and temporally resolved, as in other methods of atomic emission spectroscopy, to determine the elemental composition. The method has many potential advantages over more common laboratory-based methods like atomic absorption spectroscopy and the inductively coupled plasma. These advantages include simplicity, minimal sample preparation, possibility of non-invasive and in-situ analysis, and rapid response. On the other hand, the accuracy and precision of LIBS measurements are generally inferior to the laboratory methods thereby cancelling somewhat the advantages of LIBS for routine analyses. In some field-based applications, however, a high degree of analytical performance may not be required. These include prospecting, industrial process control monitoring, and metal identification. The latter area, which includes alloy sorting and identification of stockpiled metals, offers the best chance for immediate application and so has been examined in detail.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Erman Erkan, Turan, e Adil Gürsel Karaçor. "Quantitative Predictability Analysis of Precious Metals". In 4th international conference on knowledge and innovation in Engineering, Science and Technology. Acavent, 2018. http://dx.doi.org/10.33422/4kiconf.2018.12.20.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Tuccillo, Mary Ellen. "Analysis of Heavy Metals in Stormwater". In Engineering Foundation Conference 2001. Reston, VA: American Society of Civil Engineers, 2002. http://dx.doi.org/10.1061/40602(263)43.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Coles, L. A., A. Roy, V. V. Silberschmidt, B. M. Novac, T. Alotaibi, P. Senior e I. R. Smith. "Analysis of pulsed electroplasticity in metals". In 2017 IEEE 21st International Conference on Pulsed Power (PPC). IEEE, 2017. http://dx.doi.org/10.1109/ppc.2017.8291317.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Angeles, V. M., I. N. Muñoz e D. Señoro. "Rapid Analysis of Metals in Soil". In 5th Asia Pacific Meeting on Near Surface Geoscience & Engineering. European Association of Geoscientists & Engineers, 2023. http://dx.doi.org/10.3997/2214-4609.202378085.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Böhm, Martin, Klára Kobetičová, Jan Fořt e Robert Černý. "Determination of metals leakage from rubber granulate". In INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS ICNAAM 2020. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0081340.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

FORNALCZYK, Agnieszka, Joanna WILLNER, Magdalena JABLONSKA-CZAPLA, Katarzyna GRYGOYC e Marzena RACHWAL. "Analysis of the content of Technology Critical Metals in the e-waste". In METAL 2022. TANGER Ltd., 2022. http://dx.doi.org/10.37904/metal.2022.4516.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lieberman, Steve, David S. Knowles, Greg A. Theriault e Michele Davey. "Remote Spectroscopy over Optical Fibers for In Situ Measurement of Contaminants in Soil". In Laser Applications to Chemical and Environmental Analysis. Washington, D.C.: Optica Publishing Group, 1996. http://dx.doi.org/10.1364/lacea.1996.lthb.1.

Texto completo da fonte

Resumo:

Fiber optic-based sensor probes have been developed that can be pushed up to 50 meters into the soil for remote, real-time detection of petroleum hydrocarbons using laser-induced fluorescence (LIF) and metals via laser-induced breakdown spectroscopy (LIBS).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Reschikov, S. A., D. S. Denisov, V. M. Korotash, A. N. Strelnikov e D. V. Kokourov. "The Analysis of Wear Metals in Oils". In Proceedings of the International Conference on Aviamechanical Engineering and Transport (AviaENT 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/aviaent-19.2019.60.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Metals analysis"

Alleman, Teresa, Lisa A. Fouts e Earl D. Christensen. Metals Analysis of Biodiesel Blends. Office of Scientific and Technical Information (OSTI), maio de 2019. http://dx.doi.org/10.2172/1511818.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Clausen, Jay, Samuel Beal, Thomas Georgian, Kevin Gardner, Thomas Douglas e Ashley Mossell. Effects of milling on the metals analysis of soil samples containing metallic residues. Engineer Research and Development Center (U.S.), julho de 2021. http://dx.doi.org/10.21079/11681/41241.

Texto completo da fonte

Resumo:

Metallic residues are distributed heterogeneously onto small-arms range soils from projectile fragmentation upon impact with a target or berm backstop. Incremental Sampling Methodology (ISM) can address the spatially heterogeneous contamination of surface soils on small-arms ranges, but representative kilogram-sized ISM subsamples are affected by the range of metallic residue particle sizes in the sample. This study compares the precision and concentrations of metals in a small-arms range soil sample processed by a puck mill, ring and puck mill, ball mill, and mortar and pestle prior to analysis. The ball mill, puck mill, and puck and ring mill produced acceptable relative standard deviations of less than 15% for the anthropogenic metals of interest (Lead (Pb), Antimony (Sb), Copper (Cu), and Zinc (Zn)), with the ball mill exhibiting the greatest precision for Pb, Cu, and Zn. Precision by mortar and pestle, without milling, was considerably higher (40% to >100%) for anthropogenic metals. Media anthropogenic metal concentrations varied by more than 40% between milling methods, with the greatest concentrations produced by the puck mill, followed by the puck and ring mill and then the ball mill. Metal concentrations were also dependent on milling time, with concentrations stabilizing for the puck mill by 300 s but still increasing for the ball mill over 20 h. Differences in metal concentrations were not directly related to the surface area of the milled sample. Overall, the tested milling methods were successful in producing reproducible data for soils containing metallic residues. However, the effects of milling type and time on concentrations require consideration in environmental investigations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lanford, William A. Nuclear Reaction Analysis of Hydrogen in Metals. Fort Belvoir, VA: Defense Technical Information Center, março de 1986. http://dx.doi.org/10.21236/ada169032.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Essling, A. M., D. R. Huff, E. A. Huff, I. M. Fox e D. G. Graczyk. Preparation of waste oil for analysis to determine hazardous metals. Office of Scientific and Technical Information (OSTI), julho de 1995. http://dx.doi.org/10.2172/100041.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mahan, C. A., R. Villarreal, L. Drake, D. Figg, D. Wayne e S. Goldstein. Development of TRU waste mobile analysis methods for RCRA-regulated metals. Office of Scientific and Technical Information (OSTI), dezembro de 1998. http://dx.doi.org/10.2172/334200.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

FTHENAKIS, V. M., H. C. KIM e W. WANG. LIFE CYCLE INVENTORY ANALYSIS IN THE PRODUCTION OF METALS USED IN PHOTOVOLTAICS. Office of Scientific and Technical Information (OSTI), março de 2007. http://dx.doi.org/10.2172/909957.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zalk, D. Metals Analysis Results for the Structural Qualification Test Series (SQTS) 01 - 05. Office of Scientific and Technical Information (OSTI), abril de 2006. http://dx.doi.org/10.2172/919602.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dobryn, D. G., A. L. Brisson, C. M. Lee e S. M. Roll. Bio-leaching of toxic metals from geothermal waste. A preliminary engineering analysis. Office of Scientific and Technical Information (OSTI), fevereiro de 1986. http://dx.doi.org/10.2172/5293588.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

D.D. Macdonald. On the Existence of Our Metals-Based Civilization: I. Phase Space Analysis. Office of Scientific and Technical Information (OSTI), junho de 2005. http://dx.doi.org/10.2172/859069.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Grinfeld, Michael, John Niederhaus e Andrew Porwitzky. Using the ALEGRA Code for Analysis of Quasi-Static Magnetization of Metals. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2015. http://dx.doi.org/10.21236/ada621899.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!