Bibliografias temáticas / Mechanics

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Mechanics"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 30 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Mechanics".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Mechanics"

1

Sakamoto, Makoto, Kenji Sato, Koichi Kobayashi, Jun Sakai, Yuji Tanabe e Toshiaki Hara. "Nanoindentation Analysis of Mechanical Properties of Cortical Bone(Bone Mechanics)". Proceedings of the Asian Pacific Conference on Biomechanics : emerging science and technology in biomechanics 2004.1 (2004): 43–44. http://dx.doi.org/10.1299/jsmeapbio.2004.1.43.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Sheng, Fu Shen, e Jie Hua Hu. "Dynamics Analysis of Drag Rope Base on Lagrange Equation". Applied Mechanics and Materials 533 (fevereiro de 2014): 27–31. http://dx.doi.org/10.4028/www.scientific.net/amm.533.27.

Texto completo da fonte
Resumo:
Drag rope is a kind of soft body. Now the analysis method of rigid-Body mechanics is not suitable for drag rope mechanics to analysis. This paper compares the two branches of the theoretical mechanic, who are the vector mechanics and the analysis mechanics, then put forward a kind of mechanical analysis method which uses the Lagrange-equation which belongs to the analysis mechanics, to analysis the movement and stress of drag rope.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Arai, Masataka, Shota Hori, Satoshi Miyamoto, Kazuhiro Nakashima, Toshihiro Sera e Susumu Kudo. "OS18-5 Mechanical Stimulus Effects Diacylglycerol Distribution in Vascular Endothelial Cells(Cell and Tissue mechanics 2,OS18 Cell and tissue mechanics,BIOMECHANICS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 239. http://dx.doi.org/10.1299/jsmeatem.2015.14.239.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Namazu, Takahiro. "OS12-1 MEMS and Nanotechnology for Experimental Mechanics(invited,Mechanical properties of nano- and micro-materials-1,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 183. http://dx.doi.org/10.1299/jsmeatem.2015.14.183.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Wiwid Wahyudi, Khoirur Rozikin e Afriliawan Indra Permana. "SISTEM PAKAR DIAGNOSA KERUSAKAN MOTOR YAMAHA NMAX MENGGUNAKAN METODE FORWARD CHAINING". Elkom : Jurnal Elektronika dan Komputer 13, n.º 1 (28 de julho de 2020): 78–86. http://dx.doi.org/10.51903/elkom.v13i1.167.

Texto completo da fonte
Resumo:
The recruitment of new mechanics at Mataram Sakti is no longer through the training process at the head office, but new mechanics are placed at the dealership accompanied by the chief mechanic as a supervisor, with the aim of providing training to new mechanics in order to be able to service or periodically repair Yamaha products especially the latest motorbikes namely Yamaha NMAX, because of the flurry sometimes the mechanical head is not in place so that when the mechanic is experiencing problems it cannot directly ask the mechanical head causing the handling of repairs to be less effective and efficient. One way to overcome this is to create a web-based expert system application with a forward chaining method so that the chief mechanic can transfer the knowledge he has into the computer. Forward chaining method is a search technique that starts with known facts and then matches these facts with the IF part of the IF-Then rules, so that conclusions can be drawn. This expert system was built using supporting software including, Macromedia Dreamweaver MX, PHP script language, MySQL database and WAMP server. The expert system for diagnosing damage to Yamaha NMAX motorcycles using the forward chaining method can be used as a new mechanical learning media in diagnosing damage to NMAX motorcycles and as a means of chief mechanics transferring their knowledge.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Smith, Russell. "Light Path". Journal of Early Modern Studies 8, n.º 2 (2019): 43–79. http://dx.doi.org/10.5840/jems20198212.

Texto completo da fonte
Resumo:
This paper focuses on the mathematisation of mechanics in the seventeenth century, specifically on how the representation of compounded rectilinear motions presented in the ancient Greek Mechanica found its way into Newton’s Principia almost two thousand years later. I aim to show that the path from the former to the latter was optical: the conceptualisation of geometrical lines as paths of reflection created a physical interpretation of dia­grammatic principles of geometrical point-motion, involving the kinematics and dynamics of light reflection. Upon the atomistic conception of light, the optical interpretation of such geometrical principles entailed their mechanical generalisation to local motion; rectilinear motion via the physico-mathemat­ics of reflection and the Mechanica’s parallelogram rule; circular motion via the physico-mathematics of reflection, the Archimedean squaring of the circle and the Mechanica’s extension of the parallelogram rule to centripetal motion. This appeal to the physico-mathematics of reflection forged a realist founda­tion for the mathematisation of motion. Whereas Aristotle’s physics rested on motions which had their source in the nature of the elements, early modern thinkers such as Harriot, Descartes, and Newton based their new principles of mechanical motion upon selected elements of the mechanics of light motion, projected upon the geometry of the parallelogram rule for rectilinear and, ultimately, circular motion.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Jubran, Amal. "Monitoring Mechanics During Mechanical Ventilation". Seminars in Respiratory and Critical Care Medicine 20, n.º 01 (janeiro de 1999): 65–79. http://dx.doi.org/10.1055/s-2007-1009447.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

SIMBRUNER, GEORGE. "Lung mechanics and mechanical ventilation". Critical Care Medicine 21, Supplement (setembro de 1993): S369. http://dx.doi.org/10.1097/00003246-199309001-00044.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Henderson, William R., e A. William Sheel. "Pulmonary mechanics during mechanical ventilation". Respiratory Physiology & Neurobiology 180, n.º 2-3 (março de 2012): 162–72. http://dx.doi.org/10.1016/j.resp.2011.11.014.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Little, J. Paige, Clayton Adam, Graeme Pettet e Mark J. Pearcy. "Initiation of Mechanical Derangement in the Anulus Fibrosus Ground Matrix(Soft Tissue Mechanics)". Proceedings of the Asian Pacific Conference on Biomechanics : emerging science and technology in biomechanics 2004.1 (2004): 183–84. http://dx.doi.org/10.1299/jsmeapbio.2004.1.183.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Mechanics"

1

Lai, Jiun-Yu. "Mechanics, mechanisms, and modeling of the chemical mechanical polishing process". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8860.

Texto completo da fonte
Resumo:
Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2001.
Includes bibliographical references.
The ever-increasing demand for high-performance microelectronic devices has motivated the semiconductor industry to design and manufacture Ultra-Large-Scale Integrated (ULSI) circuits with smaller feature size, higher resolution, denser packing, and multi-layer interconnects. The ULSI technology places stringent demands on global planarity of the Interlevel Dielectric (ILD) layers. Compared with other planarization techniques, the Chemical Mechanical Polishing (CMP) process produces excellent local and global planarization at low cost. It is thus widely adopted for planarizing inter-level dielectric (silicon dioxide) layers. Moreover, CMP is a critical process for fabricating the Cu damascene patterns, low-k dielectrics, and shallow isolated trenches. The wide range of materials to be polished concurrently or sequentially, however, increases the complexity of CMP and necessitates an understanding of the process fundamentals for optimal process design. This thesis establishes a theoretical framework to relate the process parameters to the different wafer/pad contact modes to study the behavior of wafer-scale polishing. Several models of polishing - microcutting, brittle fracture, surface melting and burnishing - are reviewed. Blanket wafers coated with a wide range of materials are polished to verify the models. Plastic deformation is identified as the dominant mechanism of material removal in fine abrasive polishing.
(cont.) Additionally, contact mechanics models, which relate the pressure distribution to the pattern geometry and pad elastic properties, explain the die-scale variation of material removal rate (MRR) on pattern geometry. The pad displacement into low features of submicron lines is less than 0.1 nm. Hence the applied load is only carried by the high features, and the pressure on high features increases with the area fraction of interconnects. Experiments study the effects of pattern geometry on the rates of pattern planarization, oxide overpolishing and Cu dishing. It was observed that Cu dishing of submicron features is less than 20 nm and contributes less to surface non-uniformity than does oxide overpolishing. Finally, a novel in situ detection technique, based on the change of the reflectance of the patterned surface at different polishing stages, is developed to detect the process endpoint and minimize overpolishing. Models that employ light scattering theory and statistical treatment correlate the sampled reflectance with the surface topography and Cu area fraction for detecting the process regime and endpoint. The experimental results agree well with the endpoint detection schemes predicted by the models.
by Jiun-Yu Lai.
Ph.D.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Marcucci, Lorenzo. "A mechanical model of muscle mechanics". Phd thesis, Ecole Polytechnique X, 2009. http://pastel.archives-ouvertes.fr/pastel-00004880.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

de, Vries Edgar. "Mechanics and mechanisms of ultrasonic metal welding". The Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=osu1078415529.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Randow, Charles L. "Mechanisms and mechanics of non-structural adhesion". Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-11072008-063457/.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

De, Vries Edgar. "Mechanics and mechanisms of ultrasonic metal welding". Columbus, Ohio : Ohio State University, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1078415529.

Texto completo da fonte
Resumo:
Thesis (Ph. D.)--Ohio State University, 2004.
Title from first page of PDF file. Document formatted into pages; contains xix, 253 p.; also includes graphics (some col.). Includes abstract and vita. Advisor: Karl Graff, Dept. of Industrial, Welding and Systems Engineering. Includes bibliographical references (p. 223-230).
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Matek, Christian C. A. "Statistical mechanics of nucleic acids under mechanical stress". Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:ce44cf50-2001-4f54-8e57-d1757f709fd6.

Texto completo da fonte
Resumo:
In this thesis, the response of DNA and RNA to linear and torsional mechanical stress is studied using coarse-grained models. Inspired by single-molecule assays developed over the last two decades, the end-to-end extension, buckling and torque response behaviour of the stressed molecules is probed under conditions similar to experimentally used setups. Direct comparison with experimental data yields excellent agreement for many conditions. Results from coarse-grained simulations are also compared to the predictions of continuum models of linear polymer elasticity. A state diagram for supercoiled DNA as a function of twist and tension is determined. A novel confomational state of mechanically stressed DNA is proposed, consisting of a plectonemic structure with a denaturation bubble localized in its end-loop. The interconversion between this novel state and other, known structural motifs of supercoiled DNA is studied in detail. In particular, the influence of sequence properties on the novel state is investigated. Several possible implications for supercoiled DNA structures in vivo are discussed. Furthermore, the dynamical consequences of coupled denaturation and writhing are studied, and used to explain observations from recent single molecule experiments of DNA strand dynamics. Finally, the denaturation behaviour, topology and dynamics of short DNA minicircles is studies using coarse-grained simulations. Long-range interactions in the denaturation behaviour of the system are observed. These are induced by the topology of the system, and are consistent with results from recent molecular imaging studies. The results from coarse-grained simulations are related to modelling of the same system in all-atom simulations and a local denaturation model of DNA, yielding insight into the applicability of these different modelling approaches to study different processes in nucleic acids.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Srivastava, Ankit. "Mechanics and Mechanisms of Creep and Ductile Fracture". Thesis, University of North Texas, 2013. https://digital.library.unt.edu/ark:/67531/metadc283799/.

Texto completo da fonte
Resumo:
The main aim of this dissertation is to relate measurable and hopefully controllable features of a material's microstructure to its observed failure modes to provide a basis for designing better materials. The understanding of creep in materials used at high temperatures is of prime engineering importance. Single crystal Ni-based superalloys used in turbine aerofoils of jet engines are exposed to long dwell times at very high temperatures. In contrast to current theories, creep tests on Ni-based superalloy specimens have shown size dependent creep response termed as the thickness debit effect. To investigate the mechanism of the thickness debit effect, isothermal creep tests were performed on uncoated Ni-based single crystal superalloy sheet specimens with two thicknesses and under two test conditions: a low temperature high stress condition and a high temperature low stress condition. At the high temperature, surface oxidation induced microstructural changes near the free surface forming a layered microstructure. Finite element calculations showed that this layered microstructure gave rise to local changes in the stress state. The specimens also contained nonuniform distribution of initial voids formed during the solidification and homogenization processes. The experiments showed that porosity evolution could play a significant role in the thickness debit effect. This motivated a basic mechanics study of porosity evolution in single crystals subjected to creep for a range of stress states. The study was performed using three-dimensional finite deformation finite element analysis of unit cells containing a single initially spherical void in a single crystal matrix. The materials are characterized by a rate-dependent crystal plasticity constitutive relation accounting for both primary and secondary creep. The effect of initial void spacing and creep exponent was also explored. Based on the experimental observations and results of finite element calculations a quantitative mechanistic model is proposed that can account for both bulk and surface damage effects and assess their relative roles in the observed thickness debit effect. Another set of calculations aim at relating the crack growth resistance and fracture surface morphology to material microstructure for ductile structural metals. The process that governs the ductile fracture of structural materials at room temperature is one of nucleation, growth and coalescence of micron scale voids, and involves large plastic deformations. Experimental studies have shown that fracture surfaces in a wide variety of materials and under a wide variety of loading conditions have remarkable scaling properties. For thirty years, the hope to relate the statistical characterization of fracture surfaces to a measure of a material's crack growth resistance has remained unfulfilled. Only recently has the capability been developed to calculate sufficient amounts of three dimensional ductile crack growth in heterogeneous microstructures to obtain a statistical characterization of the predicted fracture surfaces. This development has enabled the exploration of the relation of both fracture toughness and fracture surface statistics to material properties and microstructure when the fracture mechanism is one of void nucleation, growth and coalescence. The relation of both toughness and the statistical properties of fracture surfaces in calculations of heterogeneous microstructures to various microstructural features is discussed and a remarkable correlation between fracture surface roughness and fracture toughness is shown for the first time.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Porro, Cristina Shino. "Quantum mechanical/molecular mechanics studies of Cytochrome P450BM3". Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/quantum-mechanical--molecular-mechanics-studies-of-cytochrome-p450bm3(ad4255e7-b779-47a2-a2c5-8dbf6b603ca5).html.

Texto completo da fonte
Resumo:
Cytochrome P450 (P450) enzymes are found in all kingdoms of life, catalysing a wide range of biosynthetic and metabolic processes. They are, in fact, of particular interest in a variety of applications such as the design of agents for the inhibition of a particular P450 to combat pathogens or the engineering of enzymes to produce a particular activity. Bacterial P450BM3 is of particular interest as it is a self-sufficient multi-domain protein with high reaction rates and a primary structure and function similar to mammalian isoforms. It is an attractive enzyme to study due to its potential for engineering catalysts with fast reaction rates which selectively produce molecules of high value.In order to study this enzyme in detail and characterise intermediate species and reactions, the first step was to design a general hybrid quantum mechanical /molecular mechanics (QM/MM) computational method for their investigation. Two QM/MM approaches were developed and tested against existing experimental and theoretical data and were then applied to subsequent investigations.The dissociation of water from the water-bound resting state was scrutinised to determine the nature of the spin conversion that occurs during this transformation. A displacement of merely 0.5 Å from the starting state was found to trigger spin crossing, with no requirement for the presence of a substrate or large conformational changes in the enzyme.A detailed investigation of the sulfoxidation reaction was undertaken to establish the nature of the oxidant species. Both reactions involving Compound 0 (Cpd0) and Compound I (CpdI) confirmed a concerted pathway proceeding via a single-state reactivity mechanism. As the reaction involving Cpd0 was found to be unrealistically high, the reaction proceeds preferentially via the quartet state of CpdI. This QM/MM study revealed that the preferred spin-state and the transition state structure for sulfoxidation are influenced by the protein environment. P450cam and P450BM3 were found to have CpdI species with different Fe-S distances and spin density distributions, and the latter having a larger reaction barrier for sulfoxidation.A novel P450 species, the doubly-reduced pentacoordinated system, was characterised using gas-phase and QM/MM methods. It was discovered to have a heme radical coupled to two unpaired electrons on the iron centre, making it the only P450 species to have similar characteristics to CpdI. Calculated spectroscopic parameters may assist experimentalists in the identification of the elusive CpdI.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Guillou, Lionel. "Cell Mechanics : Mechanical Properties and Membrane Rupture Criteria". Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX041/document.

Texto completo da fonte
Resumo:
L’athérosclérose est une maladie artérielle chronique qui est une des causes majeures d’accidents vasculaires cérébraux et de crises cardiaques. Cette thèse a pour objectif de mieux comprendre certains facteurs spécifiques impliqués dans le dévelopement de cette maladie en abordant cette problématique sous l’angle de la mécanique.Deux types de cellules qui jouent un rôle important dans le dévelopement et la progression de l’athérosclérose sont les cellules endothéliales adhérentes et les leucocytes non-adhérents (les globules blancs). Nous avons développé deux systèmes capables de mesurer les propriétés mécaniques de ces deux grands types cellulaires. Le premier, appelé “indentation de profil”, utilise des micropipettes et des microindenteurs pour indenter la cellule, tandis que le second utilise la microfluidique pour soumettre les cellules à une contrainte d’élongation.De plus, nous nous sommes demandé si la mécanique pouvait nous aider à comprendre quand les déformations des cellules, ou les contraintes exercées sur elles, pouvaient les endommager.En effet, lorsque les plaques d’athérosclérose obstruent une partie trop grande du flux sanguin, le traitement le plus courant consiste à rouvrir le vaisseau avec un ballon et à le maintenir ouvert au moyen d’une endoprothèse artérielle, qui est un petit dispositif maillé et tubulaire. Cette procédure exerce des contraintes de compression considérables sur l’endothélium et l’endommage. Nous avons donc cherché à trouver un critère physique prédictif de la rupture de la membrane des cellules endothéliales en compression, puis avons comparé cela aux contraintes exercées sur l’endothélium durant la pose d’une endoprothèse artérielle, afin de voir si les dommages faits à l’endothélium pouvaient potentiellement être évités.De façon similaire, nous avons cherché à obtenir un critère physique prédictif de la rupture de la membrane des leucocytes. Nous avons ensuite comparé les déformations maximales possibles des leucocytes selon que ces déformations soient passives (comme lors du passage dans la microvasculature) ou actives (comme lors de la traversée de l’endothélium par les leucocytes)
Atherosclerosis is a chronic disease of the arteries that is a major cause of heart attacks and strokes. This thesis aims to provide novel insight into this disease by looking at specific factors involved in its development from a mechanical standpoint.Two important cell types involved in the development and progression of atherosclerosis are adherent endothelial cells and non-adherent leukocytes (white blood cells). We developed two devices that are able to measure the mechanical properties of both of these cell types. The first one, termed “profile microindentation”, uses micropipettes and microindenters to indent the cell, while the second one uses microfluidics to submit cells to an extensional stress.Further, we wondered if mechanics could help us understand when deformations undergone by cells, or stresses exerted on them, could become harmful.As a matter of fact, when atherosclerotic plaques occlude too much of the blood flow, the most common treatment consists of reopening the vessel with a balloon and keeping it open with a tubular wired mesh called a stent. This procedure exerts considerable compressive stress on the endothelium and is known to be associated with extensive endothelial damage. Hence, we seek to find a physical criterion that is predictive of endothelial cell membrane rupture under compression and to compare this to the stress exerted on the endothelium during the stenting procedure, to see if endothelial damage could potentially be avoided.Similarly, we seek to obtain a physical criterion that is predictive of leukocyte membrane rupture. We then compare and contrast the maximum possible deformations of leukocytes depending on whether those deformations are passive (such as when going through the microvasculature) or active (such as when leukocytes traverse the endothelial barrier)
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Pérez, Palau Daniel. "Dynamical transport mechanisms in celestial mechanics and astrodynamics problems". Doctoral thesis, Universitat de Barcelona, 2015. http://hdl.handle.net/10803/362369.

Texto completo da fonte
Resumo:
L’objectiu d’aquesta tesi és afegir una petita fulla a l’arbre del coneixement. En particular a la branca del sistemes dinàmics. La teoria de sistemes dinàmics és la branca de les matemàtiques que estudia l’evolució del que ens envolta. Un dels objectius de la teoria dels sistemes dinàmics és estudiar com evoluciona amb el temps un cert procés evolutiu, és a dir, donades unes condicions inicials per a un cert estat, quin serà l’estat del sistema “t” unitats de temps. En alguns problemes és possible trobar estructures que ens separen diferents tipus de moviment. Per exemple, un moviment fitat d’un de no fitat. Aleshores, aquestes estructures determinen com evolucionà el sistema sota estudi. En aquest cas parlem de mecanismes dinàmics de transport. És a dir, quines són les possibles maneres que té un cert estat d’arribar a un altre. La teoria de sistemes dinàmics treu models i problemes gran varietat d’àmbits científics. En aquesta tesi ens centrarem en problemes de mecànica celeste i astrodinàmica. L’estructura de la present tesi és com segueix: − El Capítol 1 està dedicat a introduir alguns dels conceptes que es fan servir en els capítols posteriors, així com qüestions de notació i la definició dels sistemes dinàmics que s’empraran. − En el Capítol 2 s’introdueix l’eina principal de la tesi, el Jet Transport. Per fer-la servir cal implementar una àlgebra de polinomis. El capítol explica com fer aquesta implementació. Les primeres seccions es dediquen a explicar com fer un ús eficient de la memòria i a introduir les operacions bàsiques amb polinomis (el producte per un escalar, la suma, el producte, la divisió de dos polinomis). També s’explica com realitzar altres operacions elementals com l’exponencial, el logaritme, el sinus i el cosinus així com la derivació i la integració de polinomis. A les darreres seccions s’explica com implementar operacions més complexes com la propagació de fluxos (incloent el càlcul d’aplicacions de Poincaré i altres tècniques per a millorar els resultats obtinguts), el càlcul de la inversa funcional d’un polinomi i la transformació de densitats mitjançant una aplicació. − El Capítol 3 està dedicat a parlar sobre indicadors dinàmics. Primer es repassen els exponents de Lyapunov a temps finit i les estructures lagrangianes coherents. Fruit d’aquestes reflexions es desenvolupen algorismes per tal de disminuir el temps de còmput. Tot seguit, es donen quatre indicadors de la dinàmica alternatius basats en el Jet Transport: la màxima mida de la caixa inicial, la màxima relació d’expansió, la màxima relació de contracció i la màxima relació d’expansió a l’espai normal. El capítol segueix desenvolupant un algorisme d’extracció d’estructures per tal d’extreure i resumir la informació donada pels indicadors dinàmics. Finalment, es fan servir els indicadors dinàmics introduïts per tal de determinar zones d’estabilitat efectiva en el problema restringit de tres cossos. − En el Capítol 4 s’estudia la col·lisió de satèl·lits artificials. Primerament s’estudien les diferents per torbacions que afecten al moviment de satèl·lits al voltant de la terra. Es considera un problema de dos cossos amb pertorbacions degudes al potencial terrestre, a la força de fregament atmosfèric i a la gravetat de la Lluna i el Sol. S’estudien els efectes d’aquestes pertorbacions i també com realitzar l’implementació mitjançant el Jet Transport. El capítol acaba amb algunes simulacions de Monte Carlo per extreure informació d’una col·lisió semblant a la produïda entre els satèl·lits Iridium-33 i el Kosmos-2251 l’any 2009. − L’annex A explica breument les funcions desenvolupades per a aquesta tesi i s’introdueixen unes petites notes sobre paral·lelització de codis en C mitjançant open MP.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Mechanics"

1

Cliff, Gromer, ed. Popular mechanics Saturday mechanic. New York: Hearst Books, 1994.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Secession, Wiener, ed. Ericka Beckman: Game mechanics, game mechanics, mechanics, chance mechanics, mechanics and games, game mechanics. Berlin: Revolver Publishing, 2017.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Boudri, J. Christiaan. What was Mechanical about Mechanics. Dordrecht: Springer Netherlands, 2002. http://dx.doi.org/10.1007/978-94-017-3672-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Z, Parton V., ed. Mechanical engineering and applied mechanics. New York: Hemisphere Pub. Corp., 1990.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Soldati, Alfredo, e Cristian Marchioli. Fluid Mechanics for Mechanical Engineers. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-53950-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

L, Cassiday George, ed. Analytical mechanics. 7a ed. Belmont, CA: Thomson Brooks/Cole, 2005.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

L, Cassiday George, ed. Analytical mechanics. 5a ed. Fort Worth: Saunders College Pub., 1993.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

L, Cassiday George, ed. Analytical mechanics. 6a ed. Fort Worth: Saunders College Pub., 1999.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Gross, Dietmar. Engineering Mechanics 2: Mechanics of Materials. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

ter, Haar D. Elements of statistical mechanics. 3a ed. Oxford: Butterworth-Heinemann, 1995.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Mechanics"

1

Hattab, Helen. "From Mechanics to Mechanism". In The Science of Nature in the Seventeenth Century, 99–129. Dordrecht: Springer Netherlands, 2005. http://dx.doi.org/10.1007/1-4020-3703-1_5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Farré, R., e D. Navajas. "Oscillatory Mechanics During Mechanical Ventilation". In Mechanics of Breathing, 337–47. Milano: Springer Milan, 2002. http://dx.doi.org/10.1007/978-88-470-2916-3_29.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Van Dyck, Maarten. "Mechanical Philosophy: Science of Mechanics". In Encyclopedia of Early Modern Philosophy and the Sciences, 1–11. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-319-20791-9_141-1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Bento, J. "Modelling Mechanical Behaviour without Mechanics". In Development of Knowledge-Based Systems for Engineering, 37–58. Vienna: Springer Vienna, 1998. http://dx.doi.org/10.1007/978-3-7091-2784-1_4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Jonson, B. "Mechanical Ventilation and Lung Mechanics". In Anaesthesia, Pain, Intensive Care and Emergency Medicine — A.P.I.C.E., 601–10. Milano: Springer Milan, 1999. http://dx.doi.org/10.1007/978-88-470-2145-7_60.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Van Dyck, Maarten. "Mechanical Philosophy: Science of Mechanics". In Encyclopedia of Early Modern Philosophy and the Sciences, 1223–33. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-319-31069-5_141.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Robinett, Rush D., e David G. Wilson. "Mechanics". In Understanding Complex Systems, 23–53. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-823-2_3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Maestro, P., E. Gaffet, G. Le Caër, A. Mocellin, E. Reynaud, T. Rouxel, M. Soulard, J. Patarin, L. Thilly e F. Lecouturier. "Mechanics". In Nanomaterials and Nanochemistry, 661–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-72993-8_30.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Cioranescu, D., V. Girault e K. R. Rajagopal. "Mechanics". In Advances in Mechanics and Mathematics, 5–91. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39330-8_2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Calvert, J. R., e R. A. Farrar. "Mechanics". In An Engineering Data Book, 40–44. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-11310-1_5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Mechanics"

1

Hampel, Thorsten, Ferdinand Ferber, Reinhard Keil-Slawik e Wolfgang H. Müller. "Hypermedia teaching of mechanics---MechANIma". In the 6th annual conference on the teaching of computing and the 3rd annual conference. New York, New York, USA: ACM Press, 1998. http://dx.doi.org/10.1145/282991.283084.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Zhu*, Yaping. "Understanding geopressure mechanisms using micro-mechanics". In SEG Technical Program Expanded Abstracts 2014. Society of Exploration Geophysicists, 2014. http://dx.doi.org/10.1190/segam2014-0895.1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Nikolić, Hrvoje, Guillaume Adenier, Andrei Yu Khrennikov, Pekka Lahti, Vladimir I. Man'ko e Theo M. Nieuwenhuizen. "Classical Mechanics as Nonlinear Quantum Mechanics". In Quantum Theory. AIP, 2007. http://dx.doi.org/10.1063/1.2827300.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Doi, Yoshiyuki, Hidehiko Nakaya, Yukiko Kamata, Yutaka Komiyama e Satoshi Miyazaki. "HyperSuprime: mechanics". In SPIE Astronomical Telescopes + Instrumentation, editado por Ian S. McLean e Masanori Iye. SPIE, 2006. http://dx.doi.org/10.1117/12.672443.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Saunders, K., e L. Knauer. "XDP Mechanics". In OCEANS '87. IEEE, 1987. http://dx.doi.org/10.1109/oceans.1987.1160872.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Hartle, James B. "Quantum Mechanics". In Proceedings of the 23rd Solvay Conference on Physics. WORLD SCIENTIFIC, 2007. http://dx.doi.org/10.1142/9789812706768_0002.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Chiou, A. "Cellular mechanics and DNA mechanics via optical manipulation". In 2005 IEEE LEOS Annual Meeting. IEEE, 2005. http://dx.doi.org/10.1109/leos.2005.1547896.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Wei, Liuchuang, Ping Wei e Yabiao Yang. "Talking About Mechanics History Education in Mechanics Course". In International Conference on Modern Educational Technology and Innovation and Entrepreneurship (ICMETIE 2020). Paris, France: Atlantis Press, 2020. http://dx.doi.org/10.2991/assehr.k.200306.084.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Oberdorfer, Sebastian, e Marc Erich Latoschik. "Effective Orbital Mechanics Knowledge Training Using Game Mechanics". In 2018 10th International Conference on Virtual Worlds and Games for Serious Applications (VS-Games). IEEE, 2018. http://dx.doi.org/10.1109/vs-games.2018.8493417.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

McHarris, Wm C. "Quantum Mechanics, Nonlinear Dynamics, and Correlated Statistical Mechanics". In FOUNDATIONS OF PROBABILITY AND PHYSICS - 4. AIP, 2007. http://dx.doi.org/10.1063/1.2713481.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Mechanics"

1

Monin, A. S., e A. M. Yaglom. Statistical Fluid Mechanics: The Mechanics of Turbulence. Fort Belvoir, VA: Defense Technical Information Center, setembro de 1999. http://dx.doi.org/10.21236/ada398728.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Raboin, P. J. Computational mechanics. Office of Scientific and Technical Information (OSTI), janeiro de 1998. http://dx.doi.org/10.2172/15009523.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Goudreau, G. L. Computational mechanics. Office of Scientific and Technical Information (OSTI), março de 1993. http://dx.doi.org/10.2172/10194488.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Goudreau, G. L. ,. LLNL. Computational mechanics. Office of Scientific and Technical Information (OSTI), fevereiro de 1997. http://dx.doi.org/10.2172/16316.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Drake, Thomas G. Megaripple Mechanics. Fort Belvoir, VA: Defense Technical Information Center, setembro de 1997. http://dx.doi.org/10.21236/ada627967.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Liu, C. T. Material Mechanics Research. Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 2003. http://dx.doi.org/10.21236/ada412622.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Gibala, Ronald, Amit K. Ghosh, David J. Srolovitz, John W. Holmes e Noboru Kikuchi. The Mechanics and Mechanical Behavior of High-Temperature Intermetallic Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, junho de 2000. http://dx.doi.org/10.21236/ada382602.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Kadum, Hawwa. Mechanics of Canopy Turbulence. Portland State University Library, janeiro de 2000. http://dx.doi.org/10.15760/etd.7392.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Robertson, Brett Anthony. Phase Field Fracture Mechanics. Office of Scientific and Technical Information (OSTI), novembro de 2015. http://dx.doi.org/10.2172/1227184.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Coon, Max D. Sea Ice Mechanics Research. Fort Belvoir, VA: Defense Technical Information Center, julho de 1997. http://dx.doi.org/10.21236/ada327642.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Mechanics":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia