Artigos de revistas sobre o tema "Mechanical grinding"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Mechanical grinding".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Rasuljon, Tojiev, Azizbek Isomiddinov, Bobojon Ortiqaliyev e Boyqo‘Zi Khursanov. "INFLUENCE OF PREVIOUS MECHANICAL TREATMENTS ON MATERIAL GRINDING". International Journal of Advance Scientific Research 02, n.º 11 (1 de novembro de 2022): 35–43. http://dx.doi.org/10.37547/ijasr-02-11-06.
Texto completo da fonteShiga, Shinya, Takayuki Norimatsu, Tsuyoshi Itsukaichi, Minoru Umemoto e Isao Okane. "Mechanical Alloying and Mechanical Grinding of Al75Ni25." Journal of the Japan Society of Powder and Powder Metallurgy 38, n.º 7 (1991): 976–80. http://dx.doi.org/10.2497/jjspm.38.976.
Texto completo da fonteHARA, Shigeo, e Toshio SAITOU. "Influence of Grinding Fluids on Grinding Cracks. Study on Grinding Cracks in Creep Feed Grinding." Journal of the Japan Society for Precision Engineering 59, n.º 2 (1993): 252–56. http://dx.doi.org/10.2493/jjspe.59.252.
Texto completo da fonteZhou, Fu Fang, Bao Gai Zhai, Zhuo Ran She, Yuan Ming Huang e Chun Xu Pan. "Mechanical Grinding: An Effective Method to Control the Conductivity of p-Toluene Sulfonic Acid Doped Polypyrrole". Key Engineering Materials 407-408 (fevereiro de 2009): 573–76. http://dx.doi.org/10.4028/www.scientific.net/kem.407-408.573.
Texto completo da fonteINASAKI, Ichiro. "Grinding". Journal of the Japan Society for Precision Engineering 75, n.º 1 (2009): 72–73. http://dx.doi.org/10.2493/jjspe.75.72.
Texto completo da fonteKabanov, Vadim. "The Cement Mechanical Activation Effective Application Field Determination". Materials Science Forum 1011 (setembro de 2020): 31–36. http://dx.doi.org/10.4028/www.scientific.net/msf.1011.31.
Texto completo da fonteRodríguez Torres, C. E., Francisco H. Sánchez, L. Mendoza-Zélis e M. B. Fernández Van Raap. "Mechanical Grinding of Iron Borides". Materials Science Forum 179-181 (fevereiro de 1995): 103–8. http://dx.doi.org/10.4028/www.scientific.net/msf.179-181.103.
Texto completo da fonteZHOU, Li bo, Shinji KAWAI, Jun SHIMIZU, Hiroshi EDA e Shunichiro KIMURA. "Research on Chemo-Mechanical Grinding". Proceedings of The Manufacturing & Machine Tool Conference 2002.4 (2002): 97–98. http://dx.doi.org/10.1299/jsmemmt.2002.4.97.
Texto completo da fonteRodríguez Torres, C. E., F. H. Sánchez e L. A. Mendoza Zélis. "Decomposition ofFe2B by mechanical grinding". Physical Review B 51, n.º 18 (1 de maio de 1995): 12142–48. http://dx.doi.org/10.1103/physrevb.51.12142.
Texto completo da fonteSun, Hao, e Yi Hua Feng. "The Research of Minimum Quantity Lubrication Mechanism in Grinding with Mechanical Mechanics". Applied Mechanics and Materials 252 (dezembro de 2012): 129–33. http://dx.doi.org/10.4028/www.scientific.net/amm.252.129.
Texto completo da fonteKosmac, T., e T. H. Courtney. "Milling and mechanical alloying of inorganic nonmetallics". Journal of Materials Research 7, n.º 6 (junho de 1992): 1519–25. http://dx.doi.org/10.1557/jmr.1992.1519.
Texto completo da fonteLi, Li. "Mechanical grinding method of multi-axis linkage for elliptic contour based on algebraic geometry". Thermal Science 24, n.º 3 Part A (2020): 1561–68. http://dx.doi.org/10.2298/tsci190611022l.
Texto completo da fonteJin, Zhu Ji, Ze Wei Yuan, Ren Ke Kang e B. X. Dong. "Study on Two Kinds of Grinding Wheels for Dynamic Friction Polishing of CVD Diamond Film". Key Engineering Materials 389-390 (setembro de 2008): 217–22. http://dx.doi.org/10.4028/www.scientific.net/kem.389-390.217.
Texto completo da fonteMATSUO, Tetsuo. "Heavy Grinding and High Efficiency Grinding Technology". Journal of the Japan Society for Precision Engineering 75, n.º 1 (2009): 40. http://dx.doi.org/10.2493/jjspe.75.40.
Texto completo da fonteSawa, Takekazu, Naohiro Nishikawa e Yasushi Ikuse. "Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel - Evaluation of Grade by Grinding Force". Key Engineering Materials 656-657 (julho de 2015): 266–70. http://dx.doi.org/10.4028/www.scientific.net/kem.656-657.266.
Texto completo da fonteSheng, Jia Wei, Li Ping Zhang, Jun Yan, Qing Sun e Jian Zhang. "Nano-Structural Alteration of Pyrophyllite by Grinding Revealed by X-Ray Diffraction and High-Resolution Transmission Electron Microscopy". Journal of Nano Research 40 (março de 2016): 72–78. http://dx.doi.org/10.4028/www.scientific.net/jnanor.40.72.
Texto completo da fonteAbdelhaffez, Gamal S., Haitham M. Ahmed e Hussein A. Saleem. "Effect of ore heterogeneity on the ball mill wear rate during a grinding process at gold mines of Saudi Arabia (KSA)". Mining of Mineral Deposits 17, n.º 2 (30 de junho de 2023): 71–81. http://dx.doi.org/10.33271/mining17.02.071.
Texto completo da fonteChen, Xun, e James Griffin. "Grinding Acoustic Emission Classification in Terms of Mechanical Behaviours". Key Engineering Materials 329 (janeiro de 2007): 15–20. http://dx.doi.org/10.4028/www.scientific.net/kem.329.15.
Texto completo da fonteWU, Yongbo, Katsuo SYOJI, Tsunemoto KURIYAGAWA, Toru TACHIBANA e Masana KATO. "Evaluation of Grinding Conditions Using Dynamic Components of Grinding Force in Centerless Grinding." Journal of the Japan Society for Precision Engineering 67, n.º 9 (2001): 1443–47. http://dx.doi.org/10.2493/jjspe.67.1443.
Texto completo da fonteÇiftçi, Hakan. "Mechanical Activation of Lizardite by Dry Grinding for Enhanced Mineral Carbonation". MATTER: International Journal of Science and Technology 9 (15 de novembro de 2023): 101–12. http://dx.doi.org/10.20319/mijst.2023.9.101112.
Texto completo da fonteÇiftçi, Hakan. "MECHANICAL ACTIVATION OF LIZARDITE BY DRY GRINDING FOR ENHANCED MINERAL CARBONATION". MATTER: International Journal of Science and Technology 9, n.º 2 (15 de novembro de 2023): 17–28. http://dx.doi.org/10.20319/mijst.2023.92.1728.
Texto completo da fonteLin, Qiang, Jun Guo, Heng-yu Wang, Wen-jian Wang e Qi-yue Liu. "Optimal design of rail grinding patterns based on a rail grinding target profile". Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 232, n.º 2 (5 de dezembro de 2016): 560–71. http://dx.doi.org/10.1177/0954409716679447.
Texto completo da fonteLocock, Andrew J., David Chesterman, Diane Caird e M. John M. Duke. "Miniaturization of mechanical milling for powder X-ray diffraction". Powder Diffraction 27, n.º 3 (17 de agosto de 2012): 189–93. http://dx.doi.org/10.1017/s0885715612000516.
Texto completo da fonteXiang, Dao-hui, Zhong-yun Liu, Zhi-kun Zhou e Yun-long Yao. "Experimental study of single cubic boron nitride grains in the ultrasound-assisted high-speed grinding". Advances in Mechanical Engineering 9, n.º 2 (fevereiro de 2017): 168781401769354. http://dx.doi.org/10.1177/1687814017693543.
Texto completo da fonteLiu, Tao, Zhaohui Deng, Lishu Lv, Shuailong She, Wei Liu e Chengyao Luo. "Experimental Analysis of Process Parameter Effects on Vibrations in the High-Speed Grinding of a Camshaft". Strojniški vestnik – Journal of Mechanical Engineering 66, n.º 3 (15 de março de 2020): 175–83. http://dx.doi.org/10.5545/sv-jme.2019.6294.
Texto completo da fonteYOSHIHARA, Nobuhito, Keita SHIMADA, Masahiro MIZUNO e Tsunemoto KURIYAGAWA. "Optimization of Grinding Conditions of Axisymmetric Aspherical Grinding". Journal of the Japan Society for Precision Engineering 88, n.º 2 (5 de fevereiro de 2022): 193–97. http://dx.doi.org/10.2493/jjspe.88.193.
Texto completo da fonteZhu, Mengbo, Geng Xie, Lang Liu, Pan Yang, Huisheng Qu e Caixin Zhang. "Influence of Mechanical Grinding on Particle Characteristics of Coal Gasification Slag". Materials 15, n.º 17 (1 de setembro de 2022): 6033. http://dx.doi.org/10.3390/ma15176033.
Texto completo da fonteJafarpour, Vahid, e Rasoul Moharrami. "Numerical Stress Analysis of Creep-Feed Grinding Through Finite Element Method in Inconel Alloy X-750". Mapta Journal of Mechanical and Industrial Engineering (MJMIE) 6, n.º 01 (23 de março de 2022): 1–9. http://dx.doi.org/10.33544/mjmie.v6i01.187.
Texto completo da fonteXia, Yi, Xiu Qing Hao, Liang Li e Ning He. "Experimental Research on Chemical Mechanical Sharpening of CVD Diamond Micro Tool". Materials Science Forum 836-837 (janeiro de 2016): 263–69. http://dx.doi.org/10.4028/www.scientific.net/msf.836-837.263.
Texto completo da fonteKareepadath Santhosh, Deepa, Franci Pušavec e Peter Krajnik. "Grinding of Cemented Carbide Using a Vitrified Diamond Pin and Lubricated Liquid Carbon Dioxide". Strojniški vestnik - Journal of Mechanical Engineering 69, n.º 11-12 (21 de novembro de 2023): 435–43. http://dx.doi.org/10.5545/sv-jme.2023.658.
Texto completo da fonteSaito, Fumio. "Mechanical Activation of Solids by Grinding". Journal of the Society of Powder Technology, Japan 49, n.º 3 (2012): 226–31. http://dx.doi.org/10.4164/sptj.49.226.
Texto completo da fonteGusev, Vladimir. "Comparison study of rotary grindstone mechanical strength". Science intensive technologies in mechanical engineering, n.º 3 (12 de março de 2022): 18–26. http://dx.doi.org/10.30987/2223-4608-2022-3-18-26.
Texto completo da fonteDai, Heng Zhen, Zhu Ji Jin, Shang Gao e Z. C. Tao. "Research on the Chemical-Mechanical Grinding (CMG) Tools for Al2O3Ceramic". Advanced Materials Research 325 (agosto de 2011): 270–75. http://dx.doi.org/10.4028/www.scientific.net/amr.325.270.
Texto completo da fonteCao, Ming Li, e Cong Zhang. "Dispersion, Microstructure and Mechanical Properties of Ground Calcium Carbonate Whisker-Reinforced Portland Cement". Applied Mechanics and Materials 174-177 (maio de 2012): 1398–401. http://dx.doi.org/10.4028/www.scientific.net/amm.174-177.1398.
Texto completo da fonteNAKAJIMA, Toshikatsu, Shinya TSUKAMOTO e Norio SUGANO. "Grinding phenomena in very low speed grinding process. Very low speed grinding process. (1st Report)." Journal of the Japan Society for Precision Engineering 56, n.º 11 (1990): 2075–80. http://dx.doi.org/10.2493/jjspe.56.2075.
Texto completo da fonteChoi, J., C. W. Lee e J.-H. Park. "Development of the process model for plunge grinding and optimization of grinding process". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 225, n.º 11 (25 de julho de 2011): 2628–37. http://dx.doi.org/10.1177/0954406211406201.
Texto completo da fonteMajima, K., N. Niimi, S. Katsuyama, H. Nagai e H. Tomizawa. "Effect of mechanical grinding and mechanical alloying on Sm2Fe17". Journal of Alloys and Compounds 193, n.º 1-2 (março de 1993): 268–70. http://dx.doi.org/10.1016/0925-8388(93)90367-v.
Texto completo da fonteKOUNOSU, Kenji. "Analysis of intermittent grinding phenomenon in cylindrical traverse grinding." Journal of the Japan Society for Precision Engineering 53, n.º 2 (1987): 257–62. http://dx.doi.org/10.2493/jjspe.53.257.
Texto completo da fonteImai, Kenichiro, e Hiroshi Hashimoto. "Shear-Mode Grinding Based on The Constant Grinding Force." Journal of the Japan Society for Precision Engineering 63, n.º 6 (1997): 849–53. http://dx.doi.org/10.2493/jjspe.63.849.
Texto completo da fonteLin, XH, XL Ke, H. Ye, CL Hu e YB Guo. "Investigation of surface/subsurface integrity and grinding force in grinding of BK7 glass". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, n.º 12 (4 de fevereiro de 2016): 2349–56. http://dx.doi.org/10.1177/0954406216631575.
Texto completo da fonteHuang, Zhi, Shihang Chen e Hongyan Wang. "Development of three-dimensional dynamic grinding force measurement platform". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232, n.º 2 (17 de novembro de 2016): 331–40. http://dx.doi.org/10.1177/0954406216680380.
Texto completo da fonteZhu, Xianglong, Yu Li, Zhigang Dong, Renke Kang, Shang Gao e Liansheng Li. "Grinding Marks in Back Grinding of Wafer with Outer Rim". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, n.º 16 (26 de março de 2020): 3195–206. http://dx.doi.org/10.1177/0954406220912787.
Texto completo da fonteZhao, Guangen, Yongchao Xu, Charles Ming Zheng, Xiao Tian, Chen Lin, QianTing Wang e Youji Zhan. "Effect of the grinding process on the surface quality of ultrafine cemented carbide with different Co content". Advances in Mechanical Engineering 14, n.º 12 (dezembro de 2022): 168781322211445. http://dx.doi.org/10.1177/16878132221144591.
Texto completo da fonteXiang, Dao Hui, Yu Long Zhang, Guang Bin Yang, Song Liang, Yan Feng Wang, Qiang Qin e Guo Feng Ma. "Study on Grinding Force of High Volume Fraction SiCp/Al Composites with Rotary Ultrasonic Vibration Grinding". Advanced Materials Research 1027 (outubro de 2014): 48–51. http://dx.doi.org/10.4028/www.scientific.net/amr.1027.48.
Texto completo da fonteSeregin, N. G., e V. I. Zaprudnov. "Mechanical activation method for obtaining cement-ground piles binder". FORESTRY BULLETIN 27, n.º 1 (fevereiro de 2023): 114–20. http://dx.doi.org/10.18698/2542-1468-2023-1-114-120.
Texto completo da fonteTu, Lihui, Jianqiang Li e Weimin Shi. "Investigation on experiment and simulation of the grinding process of cast iron". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, n.º 13 (18 de fevereiro de 2020): 2653–61. http://dx.doi.org/10.1177/0954406220907928.
Texto completo da fonteIlinykh, Andrey, Alexander Pikalov e Elena Jurkova. "Innovative solutions for a new technology of high-speed rail grinding". E3S Web of Conferences 471 (2024): 02023. http://dx.doi.org/10.1051/e3sconf/202447102023.
Texto completo da fonteHu, Huiqing. "Grinding of double disc grinding machine". Chinese Journal of Mechanical Engineering (English Edition) 18, n.º 01 (2005): 1. http://dx.doi.org/10.3901/cjme.2005.01.001.
Texto completo da fonteTASHIRO, Yoshiaki, Libo ZHOU, Jun SHIMIZU, Noriaki SHINODA e Yuuki MIKAMI. "Research on Chemo-Mechanical-Grinding (CMG) of Si wafer". Journal of the Japan Society for Precision Engineering 81, n.º 10 (2015): 957–62. http://dx.doi.org/10.2493/jjspe.81.957.
Texto completo da fonteGuha, Spandan, Partha Protim Das e Shankar Chakraborty. "Improvement in the performance with less stiff air layer formation around the rubber tube-pasted grinding wheel". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, n.º 15 (16 de abril de 2019): 5175–89. http://dx.doi.org/10.1177/0954406219844534.
Texto completo da fonte