Literatura científica selecionada sobre o tema "Matériaux en bois"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Matériaux en bois".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Matériaux en bois"
VERNOIS (Michel). "Les Grandes évolutions des matériaux bois et à base de bois." Revue Forestière Française, sp (2004): 175. http://dx.doi.org/10.4267/2042/5139.
Texto completo da fonteMartin, Jean-Claude. "La création de paysages viticoles : une histoire de matériaux". Sud-Ouest européen 21, n.º 1 (2006): 29–35. http://dx.doi.org/10.3406/rgpso.2006.2909.
Texto completo da fonteDubois, Frédéric, Claude Chazal e Christophe Petit. "Modélisation de la rupture différée dans les matériaux en bois". Revue Française de Génie Civil 1, n.º 4 (janeiro de 1997): 713–42. http://dx.doi.org/10.1080/12795119.1997.9692152.
Texto completo da fonteCELZARD, Alain, e Jean-Michel LEBAN. "DE NOUVEAUX MATÉRIAUX À BASE DE BOIS : UN CONTEXTE, DES EXEMPLES". Revue Forestière Française, n.º 5 (2013): 463. http://dx.doi.org/10.4267/2042/53708.
Texto completo da fonteDjoudi, Tarek, Mabrouk Hecini, Daniel Scida, Youcef Djebloun e Belhi Guerira. "Caractérisation physique et mécanique du bois et des fibres issus d’une palme mûre de palmier dattier". Matériaux & Techniques 106, n.º 4 (2018): 403. http://dx.doi.org/10.1051/mattech/2018056.
Texto completo da fonteChugoua Njamen, Adeline, Alexis Kemajou e Louis Monkam. "Etude expérimentale du comportement thermique d'un local avec enveloppe en bois 'Iroko' dans la ville de Douala au Cameroun". Journal of Renewable Energies 21, n.º 2 (30 de junho de 2018): 217–30. http://dx.doi.org/10.54966/jreen.v21i2.684.
Texto completo da fonteLeturcq, Philippe. "Empreinte carbone de la forêt et de l’utilisation de son bois". Revue forestière française 72, n.º 6 (31 de dezembro de 2020): 525–37. http://dx.doi.org/10.20870/revforfr.2020.5348.
Texto completo da fonteAlix, Claire. "Bois flottés et archéologie de l’Arctique: contribution à la préhistoire récente du détroit de Béring". Études/Inuit/Studies 28, n.º 1 (24 de março de 2006): 109–32. http://dx.doi.org/10.7202/012642ar.
Texto completo da fonteCoureau, Jean-Luc, e Eric Cuvillier. "Prédiction de la résistance d'éléments de structures bois renforcés localement par des matériaux composites". Revue Française de Génie Civil 7, n.º 4 (abril de 2003): 499–527. http://dx.doi.org/10.1080/12795119.2003.9692506.
Texto completo da fonteMay, J. F., R. Guyonnet e J. Bourgois. "Matériaux composites à base de bois retifié II. Etudes des propriétés mecaniques de differents mélanges". Angewandte Makromolekulare Chemie 178, n.º 1 (abril de 1990): 171–89. http://dx.doi.org/10.1002/apmc.1990.051780113.
Texto completo da fonteTeses / dissertações sobre o assunto "Matériaux en bois"
Kirsch, Franck. "Fatigue-fluage du bois". Metz, 1998. http://docnum.univ-lorraine.fr/public/UPV-M/Theses/1998/Kirsch.Franck.SMZ9835.pdf.
Texto completo da fonteCoureau, Jean-Luc. "Renforcement local d'éléments de structures bois par des matériaux composites". Bordeaux 1, 2002. http://www.theses.fr/2002BOR12508.
Texto completo da fonteIsmail, Rached. "Bois et contact alimentaire : de la méthodologie d’extraction des microorganismes à partir du bois à l’évaluation du transfert microbiologique aux aliments cibles". Nantes, 2015. http://www.theses.fr/2015NANT065F.
Texto completo da fonteIn France, the wood material is authorized for food contact by the decree of 1945, reinforced by the information note DGCCRF N°. 2012-93 “Wood material” (Directorate General for Consumer Affairs, Competition and Fraud Control), setting the positive list of wood species permitted for food contact. Although previous studies have shown the hygienic quality of wooden cutting boards and bacteriostatic quality of ripening shelves, work is still needed to microbiological characterization of the wooden surface. In this context, three recovering methods of microorganisms were compared and validated for three types of wood (dry or wet) used by the French sector of wood packaging suppliers. Three microbiological hazards for sectors which use wooden packaging were tested
Sahmim, Wissem. "Modification chimique des extractibles de bois : application à la protection du bois et des matériaux métalliques". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0300/document.
Texto completo da fonteWithin the framework of this thesis, we are interested in the design, synthesis and characterization of the physicochemical properties of lipophilic derivatives of wood extractives. We have thus considered modifying the structure of three flavonoids whose resource is important from different wood species: catechin, mesquitol and naringenin to incorporate additional functionalities. The applications reported here mainly deal with the protection of materials like wood and corrodible metals. With respect to wood preservation, it seems possible to consider different strategies to inhibit the wood degradation related to fungi on wood. Impregnation of antioxidant compounds such as lipophilic polyphenols on wood can limit the effects of radicals or other oxidants used and generated by rots. The second intended application is the protection of metallic materials. Indeed, the use of natural antioxidants as a corrosion inhibitor replace inorganic inhibitors or organic molecules (polyamines, imidazole...), because their production is expensive and toxic. The grafting of a hydrophobic hydrocarbon chain on polyphenols which have antioxidant properties allows the formation of protective films on the material
Sahmim, Wissem. "Modification chimique des extractibles de bois : application à la protection du bois et des matériaux métalliques". Electronic Thesis or Diss., Université de Lorraine, 2018. http://www.theses.fr/2018LORR0300.
Texto completo da fonteWithin the framework of this thesis, we are interested in the design, synthesis and characterization of the physicochemical properties of lipophilic derivatives of wood extractives. We have thus considered modifying the structure of three flavonoids whose resource is important from different wood species: catechin, mesquitol and naringenin to incorporate additional functionalities. The applications reported here mainly deal with the protection of materials like wood and corrodible metals. With respect to wood preservation, it seems possible to consider different strategies to inhibit the wood degradation related to fungi on wood. Impregnation of antioxidant compounds such as lipophilic polyphenols on wood can limit the effects of radicals or other oxidants used and generated by rots. The second intended application is the protection of metallic materials. Indeed, the use of natural antioxidants as a corrosion inhibitor replace inorganic inhibitors or organic molecules (polyamines, imidazole...), because their production is expensive and toxic. The grafting of a hydrophobic hydrocarbon chain on polyphenols which have antioxidant properties allows the formation of protective films on the material
Mathis, Damien. "Développement de nouveaux matériaux de haute inertie thermique à base de bois et matériaux à changement de phase biosourcés". Doctoral thesis, Université Laval, 2019. http://hdl.handle.net/20.500.11794/33718.
Texto completo da fonteLes Matériaux à Changement de Phase (MCP), par stockage de chaleur latente, peuvent améliorer l’efficacité énergétique des bâtiments. En saison froide, ils peuvent emmagasiner de la chaleur durant le jour pour qu’elle soit relâchée durant la nuit, réduisant le besoin en chauffage. En saison chaude, ils peuvent permettre, moyennant une ventilation nocturne adaptée, de réduire la surchauffe des bâtiments. Afin d’optimiser le bénéfice énergétique, l’intégration de MCP doit être minutieusement réfléchie. Ce travail de thèse présente trois grands axes dédiés à l’étude de matériaux hybrides bois/MCP. Le premier axe traite de la mise en forme et de la caractérisation de panneaux décoratifs intérieurs de haute inertie thermique. Le second axe a pour objectif d’évaluer la performance de ces panneaux à l’aide de deux maisonnettes expérimentales instrumentées et placées sur le campus de l’Université LAVAL. Le troisième axe étudie l’imprégnation de la couche de surface d’une Lame de Plancher d’Ingénierie (LPI) avec des microcapsules de MCP. Dans le premier axe, des panneaux intérieurs décoratifs ont été mis en oeuvre. Ils sont constitués de MDF (Medium Density Fiberboard), HDF (High Density Fiberboard) et de différents MCP biosourcés. Les MCP ont été macroencapsulés dans des sachets de polyéthylène avant d’être placés dans les panneaux. Leur stockage de chaleur latente a été mesuré avec un débitmètre thermique selon la méthode Dynamic Heat Flux Meter Apparatus (DHFMA). Les panneaux stockent une chaleur latente maximale de 57.1 J/g, ce qui est comparable à des solutions existantes de panneaux embarquant des MCP. Leur comportement thermique a été comparé au comportement des MCP purs testés par DSC (Differential Scanning Calorimetry) et des différences significatives ont été observées. Le comportement hygromécanique des panneaux a été évalué et s’est révélé être une question d’importance en vue d’une d’industrialisation. Dans le deuxième axe, deux maisonnettes expérimentales en ossature légère de bois ont été conçues puis placées sur le campus de l’Université LAVAL. Une maisonnette a été équipée de panneaux en bois standards tandis que l’autre contenait les panneaux bois/MCP. Grâce à l’instrumentation embarquée, la performance insitu des panneaux formulés dans le premier axe a pu être étudiée. Les résultats montrent, en saison de chauffe, une réduction de la consommation en chauffage pour la maisonnette équipée de MCP. Cette réduction atteint un maximum de 41 % pour le mois de mai. Pour le confort d’été, les panneaux permettent généralement d’améliorer le confort thermique, en réduisant la surchauffe. Leur efficacité a cependant été révélée limitée par la solidification limitée du MCP pendant la nuit. Malgré une ventilation importante, lors des nuits les plus chaudes, le matériau n’était pas en mesure de se solidifier. Dans le troisième axe, des couches de surface de Lames de Planchers d’Ingénierie (LPI) ont été imprégnés avec des microcapsules de MCP biosourcés. De l’eau distillée a été utilisée comme solvant. Deux essences de bois ont été choisies : le chêne rouge et l’érable à sucre. Le gain de masse thermique s’est révélé significatif pour le chêne rouge mais négligeable pour l’érable à sucre. Pour le chêne rouge, un bénéfice de masse thermique de 77% a été mesuré. Les microcapsules ont été observées dans le bois par microscopie réflective. Elles se sont révélées être principalement présentes, formant des amas, dans les larges vaisseaux du bois initial pour le chêne rouge. Des microcapsules étaient également présentes dans les vaisseaux de l’érable à sucre, en plus petite quantité. Des tests d’adhésion ont été menés sur des lames de planchers vernis et ces tests n’ont révélé aucune influence significative de l’imprégnation sur la tenue d’un vernis.
Phase Change Materials (PCMs) are able to store a high amount of latent heat, which can improve buildings energy efficiency. During the heating season, solar energy can be stored during the day to be released at night, reducing the heating needs. During summer, daily maximum peak temperature can be reduced. In order to maximize the energy benefits, PCMs have to be implemented carefully. This thesis presents three major axes of research about wood/PCMs hybrid materials. The first axis is about manufacturing and characterizing woodbased decorative panels of high thermal mass. The second axis aims to evaluate the performance of such panels with two instrumented wood-frame test huts placed on LAVAL University Campus. The third axis is about impregnating the lamella of Engineering Wood Flooring (EWF) with PCM microcapsules. For the first axis, interior wood-based decorative panels containing PCMs were manufactured. Medium Density Fiberboard (MDF), was used as the main component and High Density Fiberboard (HDF) was used for the inner side of the panel. Several bio-based PCMs were chosen to load the panels. A macroencapsulation of the PCMs was achieved using polyethylene bags. The latent heat storage of the panels was assessed with a thermal flow meter using a Dynamic Heat Flux Meter Apparatus (DHFMA) method. A maximum latent heat storage of 57.1 J/g has been measured, which is comparable to existing panels containing PCMs. Thermal behavior of pure PCMs has been assessed by Differential Scanning Calorimetry (DSC) and then compared to the panels behavior. Significant differences have been revealed. Hygromechanical behavior of the panels has been evaluated, compared to a reference, and has been revealed of importance in case of industrialization. For the second axis, two experimental timber-frame test-huts have been implemented and were placed on the LAVAL University campus. One hut was equipped with standard wood panels whereas the other one was equipped with wood-based panels containing PCMs such as manufactured in the first axis. The in-situ performance of the panels was assessed over several seasons. In winter, the panels induced a reduction of the heating consumption. This reduction reached a maximum of 41% in May. During summer, the panels are generally able to reduce the daily peak temperature. However, their performance was found limited by the solidification of the PCM, which was hard to achieve during hottest nights. For the third axis, lamellas of Engineered Wood Flooring (EWF) have been impregnated with bio-based PCM microcapsules, using water as a solvent. Two wood species were chosen: red oak and sugar. A significant thermal mass enhancement of 77% was measured for the red oak. Impregnation of sugar maple was found harder to achieve and thus its thermal mass enhancement was lower. Reflective microscopy allowed to observe the microcapsules filling red oak initial wood big vessels, forming aggregates. Some microcapsules were also observed in the sugar maple vessels but in lower quantity. Red oak was varnished with a 100 % UV solid wood coating and submitted to pull-off adhesion tests. These tests did not reveal any significant effect of an impregnation on the varnish adherence.
Li, Hang. "Utilisation de matériaux bois intelligents pour la gestion durable des infrastructures". Thesis, Toulouse 3, 2017. http://www.theses.fr/2017TOU30288/document.
Texto completo da fonteFor fifteen years, we restart to construct with wood, and particularly with glulam to respond to the new challenges imposed by the issues of sustainable development. However, degradation issues related to moisture content (MC) or wetting/drying cycles limit the development of timber structures. As a result, the MC monitoring in timber structures becomes a critical issue. Today, several solutions exist but they do not allow a local monitoring in the lamellas of glulam. Such a solution would improve the prediction of the service life of timber structures. In the light of this observation, we proposed to transform glulam into "smart material" by embedding a MC monitoring system in the lamellas, and this, considering the major constraints of fabrication of this material (small glue line thickness, important bonding pressure, etc.). To achieve this, we have conducted a bibliographic research, in order to select the monitoring methods which can satisfy these constraints. According to this research, two technologies turn out to be interesting: the electrical measurements and the ultrasonic measurements. Several measurement configurations were proposed and tested in this PhD work. Thereafter, we conducted preliminary tests to make sure of the good functionality of these measurement configurations, and also to verify the behavior of sensors throughout the glulam fabrication process. Afterwards, we moistened the specimens with two different moistening protocols in order to verify the feasibility of MC monitoring with embedded sensors. Results showed that all the measurement configurations are operational for the MC monitoring in glulam specimens. Moreover, for electrical measurements, our results show that we can adopt almost the same calibration models for the MC monitoring by resistive measurements, no matter the type of sensors used. Furthermore, it is possible to obtain complementary information by the realization of the resistive and capacitive measurements at the same time, using surface electrodes. Regarding the ultrasonic measurements, we have obtained the sensibility curves in frequency of several families of piezoelectric film sensors. On the other hand, the influence of bonding pressure and of sensor distance on the electrical/ultrasonic measurements was also investigated in this study. Future studies will consist in using these measurement configurations to perform in situ monitoring in timber structures, and also to establish a link between the durability of glulam structures and the wetting/drying cycles in order to predict the service life of timber structures
Tahani, Najat. "Modélisation des contraintes internes dans les matériaux orthotropes cylindriques : séchage d'un billon soumis à un gradient radial d'humidité". Vandoeuvre-les-Nancy, INPL, 1988. http://www.theses.fr/1988NAN10225.
Texto completo da fonteAugier, Laurent. "Étude de l'élaboration de matériaux composites PVC/Bois à partir de déchets de menuiserie : formulation, caractérisation, durabilité et recyclabilité". Toulouse, INPT, 2007. https://hal.science/tel-04595420.
Texto completo da fonteThe study of the elaboration of PVC-wood composites showed that the manufacturing process, the wood fibres amount, size and species had more influence on the mechanical properties of the material than any coupling agent previously studied. A new coupling agent was introduced: gallic acid, polyphenol present in some wood species. Its use improved the fibre/matrix interfacial adhesion and the mechanical properties of the material. It was found that the composite weathering resistance was decreased by the wood fibres leading to surface colour change and loss of the mechanical properties (due to water action). The incorporation of some pigments decreased the UV degradation and the addition of gallic acid decreased the degradation by water. But, neither of them stopped the degradation. Five cycles of thermo-mechanical ageing did not modify the mechanical properties of these composites. Thus, it is possible to recycle the PVC/wood composite as it is
Lacroix, Simon. "Étude du renforcement de poutres en bois scié avec des matériaux composites". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0030/MQ67293.pdf.
Texto completo da fonteLivros sobre o assunto "Matériaux en bois"
Roy, Odile. Les revêtements de bois. Québec, Qué: Ville de Québec, Service de l'urbanisme en collaboration avec le Service des communications, 1989.
Encontre o texto completo da fonteS, Bates J., e Canada Forestry Branch, eds. Canadian woods for structural timbers. Ottawa: J. de L. Taché, 1997.
Encontre o texto completo da fonteBovey, Henry T. Results of experiments on the strength of white pine, red pine, hemlock and spruce. [S.l: s.n., 1986.
Encontre o texto completo da fonteT, Bovey Henry. The strength of Canadian Douglas fir, red pine, white pine and spruce. [S.l: s.n., 1986.
Encontre o texto completo da fonteT, Bovey Henry. The strength of Canadian Douglas fir, red pine, white pine and spruce. [S.l: s.n., 1986.
Encontre o texto completo da fonteCanadian Society of Civil Engineers., ed. Results of experiments on the strength of white pine, red pine, hemlock and spruce. [S.l: s.n., 1986.
Encontre o texto completo da fonteSociété canadienne d'hypothèques et de logement. Étude comparative des codes du bâtiment et des méthodes et normes de constructions à ossature de bois au Canada et en Allemagne. Ottawa, Ont: Société canadienne d'hypothèques et de logement, 1997.
Encontre o texto completo da fonteT, Irving T., e Canadian Society of Civil Engineers., eds. Holding power of wood screws. [S.l: s.n., 1986.
Encontre o texto completo da fonteM, Poisson J., ed. Le bois dans le château de pierre au moyen âge: Actes du colloque de Lons-le-Saunier, 23-25 octobre 1997. Besançon: Presses universitaires franc-comtoises, 2003.
Encontre o texto completo da fonteStephen, Smulski, ed. Engineered wood products: A guide for specifiers, designers and users. Madison, WI: PFS Research Foundation, 1997.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Matériaux en bois"
Bonnenfant, Guillemette, e Paul Bonnenfant. "Matériaux, outils et techniques". In L’art du Bois à Sanaa, 10–19. Institut de recherches et d’études sur les mondes arabes et musulmans, 1987. http://dx.doi.org/10.4000/books.iremam.3153.
Texto completo da fonteDEBEAUFORT, Frédéric. "Emballages en bois". In Matériaux et procédés d’emballage pour les industries alimentaires, cosmétiques et pharmaceutiques, 21–39. ISTE Group, 2022. http://dx.doi.org/10.51926/iste.9039.ch1.
Texto completo da fonteANTONI, Jean-Philippe. "Les matériaux du tissu urbain". In Urbanisme et aménagement des villes, 63–99. ISTE Group, 2024. http://dx.doi.org/10.51926/iste.9151.ch2.
Texto completo da fonteBROSSE, Nicolas, Arnaud BESSERER, Sarah TROILO, Pierre GIRODS, Lucas SOUFFLET e Yann ROGAUME. "Recyclage en cascade du bois déchet". In Le recyclage, enjeu pour l’économie circulaire, 219–44. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9162.ch9.
Texto completo da fonteJacob-Rousseau, Nicolas, e Frédéric Gob. "Le flottage du bois et ses conséquences écologiques, de l’Antiquité à l’époque contemporaine". In Chantiers et matériaux de construction, 175–208. MOM Éditions, 2020. http://dx.doi.org/10.4000/books.momeditions.9812.
Texto completo da fonte"Le matériau". In Basics Construire en bois, 9–28. Birkhäuser, 2020. http://dx.doi.org/10.1515/9783035621297-003.
Texto completo da fonteKoeniguer, Jean-Claude. "Les jardins et les parcs de l’Île-de-France du xvie au xviiie siècle : données environnementales et mise en œuvre des matériaux (pierres et bois)". In Ressources et construction : la transmission des savoirs sur les chantiers. Éditions du Comité des travaux historiques et scientifiques, 2020. http://dx.doi.org/10.4000/books.cths.10962.
Texto completo da fonteSève, Bernard. "Matière, matériau et matériel dans la pensée de Boris de Schlœzer". In Boris de Schlœzer, un intellectuel européen, 199–214. Presses universitaires de Rennes, 2023. http://dx.doi.org/10.4000/books.pur.195004.
Texto completo da fonteBarros, Herlane de Olinda Vieira, Camila Silva de Moraes, Nayolly Amorim Martins Bezerra, Nilson Pinto Bezerra, Enzo Freitas Nascimento, Tassio Ricardo Queiroz Lopez, Gutemberth Luis Tinoco Sousa, Paulo Henrique Rodrigues Cavalcante, Elias Victor Figueiredo dos Santos e Shielbert Silva Santos. "A IMPORTÂNCIA DA QUALIDADE DA CARNE PARA PRODUÇÃO DE EMBUTIDOS CÁRNEOS". In Meio ambiente e produção agropecuária - Volume 01. Editora Pascal LTDA, 2022. http://dx.doi.org/10.29327/5144556.1-8.
Texto completo da fonteFabre, Camille. "Le bois de chauffage à Toulouse à la fin du Moyen Âge : stocker un matériau lourd et encombrant". In Le marché des matières premières dans l’Antiquité et au Moyen Âge, 153–66. Publications de l’École française de Rome, 2021. http://dx.doi.org/10.4000/books.efr.7902.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Matériaux en bois"
Santos, Raphael Weiner Peres dos, Hugo Rodrigo Gomes de Castro e Pedro Moises de Sousa. "Um jogo digital: “RabbitLand” para o ensino aprendizagem da matemática". In Anais Estendidos do Simpósio Brasileiro de Jogos e Entretenimento Digital. Sociedade Brasileira de Computação, 2023. http://dx.doi.org/10.5753/sbgames_estendido.2023.234014.
Texto completo da fonteSilva, Laura Beatriz, Nathalya Soken Ikeda, Laryssa Cruz Rocco, Mariana Benites Oshiro e Rúbia Adrieli Sversut. "AVALIAÇÃO DA QUALIDADE FÍSICO-QUÍMICA DA MATÉRIAPRIMA E DOS COMPRIMIDOS GENÉRICOS DE PREDNISONA". In II Congresso Brasileiro de Ciências Farmacêuticas On-line. Revista Multidisciplinar em Saúde, 2021. http://dx.doi.org/10.51161/rems/1046.
Texto completo da fonteBrigida, Marcos Mourao Santa, Yara Marina Reymão de Barros, Jean Danilo da Silva Pereira, Jeany Costa da Silva e Raquel Soares Casaes Nunes. "PROPOSTA DE CURSOS DE ATUALIZAÇÃO EM BOAS PRÁTICAS NO PROCESSAMENTO DO PESCADO PARA ESTUDANTES E PROFISSIONAIS GRADUADOS: UM ESTUDO DE CASO". In I Congresso Brasileiro On-line de Ensino, Pesquisa e Extensão. Revista Multidisciplinar de Educação e Meio Ambiente, 2022. http://dx.doi.org/10.51189/ensipex/88.
Texto completo da fonteVianna, Rafael Rodrigues, Juan Lieber Marin e José Manoel Seixas. "Transferência de Conhecimento para Filtragem Online de Partículas Baseada em Calorimetria de Altas Energias". In Congresso Brasileiro de Inteligência Computacional. SBIC, 2021. http://dx.doi.org/10.21528/cbic2021-66.
Texto completo da fonteSILVA, MARCIA FERREIRA DA. "Aspectos ambientais do descarte dos resíduos sólidos de concreto armado da construção civil". In II Brazilian Congress of Development. DEV2021, 2021. http://dx.doi.org/10.51162/brc.dev2021-0064.
Texto completo da fonteRodrigues, Igor Alencar, e Bianca M. Vasconcelos. "Competências e atribuições do BIM Manager". In V ENCONTRO NACIONAL SOBRE O ENSINO DE BIM. ANTAC, 2023. http://dx.doi.org/10.46421/enebim.v5i00.3478.
Texto completo da fonteMendonça, João de Souza, Anna Beatriz Conceição De Souza e Kamile Dos Santos Torres. "IMPORTÂNCIA DA ANÁLISE MICROBIOLÓGICA NO CONTROLE DE QUALIDADE DE FITOTERÁPICOS". In I Congresso Nacional de Microbiologia Clínica On-Line. Revista Multidisciplinar em Saúde, 2021. http://dx.doi.org/10.51161/rems/1204.
Texto completo da fontePereira, Milene Oliveira, e Isabella Adona Perondi. "FILME BIODEGRADÁVEL COM ADIÇÃO DE EXTRATO DA CASCA DE JABUTICABA (MYRCIARIA CAULIFLORA)". In I Congresso de Engenharia de Biotecnologia. Revista Multidisciplinar de Educação e Meio Ambiente, 2021. http://dx.doi.org/10.51189/rema/1387.
Texto completo da fontegonçalves, jacqueline aguiar, e MARINA REGINA FRIZZAS. "DISTRIBUIÇÃO ESPACIAL DE CYCLOCEPHALA DEJEAN (COLEOPTERA: MELOLONTHIDAE: DYNASTINAE) NO BRASIL". In II Congresso Brasileiro de Biodiversidade Virtual. Revista Multidisciplinar de Educação e meio ambiente, 2022. http://dx.doi.org/10.51189/ii-conbiv/5846.
Texto completo da fonteAlmeida, Rafael Fernandes, Tatielly De Jesus Costa, Adriana Mendes Oliveira, Josilene Rosa De Sobral e Alexandra Mara Goulart Nunes Mamede. "CONDIÇÕES DOS PROCESSOS FERMENTATIVOS DE CACHAÇARIAS SITUADAS NO OESTE DA BAHIA, BRASIL". In I Congresso de Engenharia de Biotecnologia. Revista Multidisciplinar de Educação e Meio Ambiente, 2021. http://dx.doi.org/10.51189/rema/1339.
Texto completo da fonteRelatórios de organizações sobre o assunto "Matériaux en bois"
Habert, Guillaume, e Francesco Pittau. Synthèse conjointe «Constructions durables en béton» du PNR «Energie». Swiss National Science Foundation (SNSF), fevereiro de 2020. http://dx.doi.org/10.46446/publication_pnr70_pnr71.2020.5.fr.
Texto completo da fonte