Literatura científica selecionada sobre o tema "Macrofluidic model"

Reducing production costs, known as scaling, is a significant obstacle in the advancement of cultivated meat. The cultivation process hinges on several key components, e.g., cells, media, scaffolds, and bioreactors. This study demonstrates an innovative approach, departing from traditional stainless steel or glass bioreactors, by integrating food-grade plant-based scaffolds and thermoplastic film bioreactors. While thermoplastic films are commonly used for constructing fluidic systems, conventional welding methods are cost-prohibitive and lack rapid prototyping capabilities, thus inflating research and development expenses. The developed laser welding technique facilitates contamination-free and leakproof sealing of polyethylene films, enabling the efficient fabrication of macrofluidic systems with various designs and dimensions. By incorporating food-grade plant-based scaffolds, such as rice seeded with bovine mesenchymal stem cells, into these bioreactors, this study demonstrates sterile cell proliferation on scaffolds within macrofluidic systems. This approach not only reduces bioreactor prototyping and construction costs but also addresses the need for scalable solutions in both research and industrial settings. Integrating single-use bioreactors with minimal shear forces and incorporating macro carriers such as puffed rice may further enhance biomass production in a scaled-out model. The use of food-grade plant-based scaffolds aligns with sustainable practices in tissue engineering and cultured-meat production, emphasizing its suitability for diverse applications.

To study the agitating effect of submersible mixers in a square sewage treatment pool, the three-dimensional modeling Pro/E software was adopted to establish the physical model. The large-scale computational fluid dynamics software FLUENT6.3 was used, and the large-scale software ICEM was selected to build an unstructured tetrahedron grid of the sewage treatment pool. Next, the sewage treatment pool was numerically simulated by RNG k-ε turbulent model and move coordinate system technology. The macrofluid field and the flow field distribution of each section were analyzed to observe the efficiency of each submersible mixer. The average velocity of the fluid and the stirring volume were studied simultaneously. Results show that, under the action of three mixers, fluid of the sewage pool forms a continuous circulating water flow. The fluid is mixed adequately. The average velocity of fluid in the pool is at around 0.3 m/s, and the fluid mixing area in the pool is more than 90%, which is in agreement with the working requirements. Consequently, it can provide a reference basis for the practical engineering application of submersible mixers by using this method.

Abstract While microfluidic systems model aspects of metastasis, they are limited to artificially created tissues of limited complexity. We set out to develop an in vitro model of tumor cell migration from a primary tumor to a distant site that allows use of tissue. Accordingly, we created a macrofluidic model using culture plate wells connected with type I collagen-coated large bore tubing and has recirculating media. Green fluorescent protein-positive prostate carcinoma cells in a hydrogel or excised tumor xenografts from mice were placed into primary tumor sites and either human bone stromal cells (HS-5) in a hydrogel or human-derived bone chips were seeded into metastatic sites. Cells from the primary sites migrated to and grew in metastatic sites. Bone enhanced growth at metastatic sites and established a CXCL12 gradient that was higher in metastatic versus primary sites. AMD3100-mediated inhibition of CXCL12 function reduced the number of cells targeting the bone at the metastatic sites. In summary, we have developed a macrofluidic metastasis model that allows incorporation of tumor and metastatic microenvironment tissues and models chemotaxis. This system allows for incorporation of tumor heterogeneity and inclusion of an intact microenvironment. These features will facilitate identification of mechanisms and therapeutics for bone metastasis.

Atherosclerosis is the narrowing of the arteries due to the formation of fatty plaques, which is the main cause of myocardial infarction and stroke. It is important to develop an in vitro model that can combine multiple-type cell co-culture, vessel wall-like structure, and fluid condition to simulate the processes of atherosclerosis. Herein, we used a simple microfluidic chip made of three polydimethylsiloxane layers to co-culture endothelial and smooth muscle cells in a flat rectangular microchannel. After being connected with a circulating culture medium driven by a peristaltic pump, the flat microchannel was deformed to a tunnel-like macrochannel. The fluid pressure and shear stress applied on the cells in the deformed macrochannel can be varied by adjusting the circulating flow rate and the thickness of the middle layer. Under three levels of the pressure (65, 131, and 196 mm Hg) or shear stress (0.99, 4.78, and 24 dyne/cm2) conditions, a series of atherosclerosis-related events, including endothelial cell junction, pro-inflammatory cytokine secretion, monocyte adhesion, and lipid accumulation, were investigated. The atherosclerosis-related results showed that the medium pressure or shear stress exhibited a relatively weak pro-atherosclerotic effect in a V-shaped trend. To demonstrate the potential in drug screen, the effects of three well-known anti-atherosclerotic drugs (atorvastatin, tetramethylpyrazine, and high-density lipoprotein) on the lipid accumulation and pro-inflammatory cytokine secretion were evaluated under a strong pro-atherosclerotic fluid condition (65 mm Hg, 0.99 dyne/cm2). This in vitro model of atherosclerosis has shown great potential in drug screen application.

Lymphangiogenesis is a stage of new lymphatic vessel formation in development and pathology, such as inflammation and tumor metastasis. Physiologically relevant models of lymphatic vessels have been in demand because studies on lymphatic vessels are required for understanding the mechanism of tumor metastasis. In this study, a new three-dimensional lymphangiogenesis model in a tumor microenvironment is proposed, using a newly designed macrofluidic platform. It is verified that controllable biochemical and biomechanical cues, which contribute to lymphangiogenesis, can be applied in this platform. In particular, this model demonstrates that a reconstituted lymphatic vessel has an in vivo–like lymphatic vessel in both physical and biochemical aspects. Since biomechanical stress with a biochemical factor influences robust directional lymphatic sprouting, whether our model closely approximates in vivo, the initial lymphatics in terms of the morphological and genetic signatures is investigated. Furthermore, attempting an incorporation with a tumor spheroid, this study successfully develops a complex tumor microenvironment model for use in lymphangiogenesis and reveals the microenvironment factors that contribute to tumor metastasis. As a first attempt at a coculture model, this reconstituted model is a novel system with a fully three-dimensional structure and can be a powerful tool for pathological drug screening or disease model.

Proper placental vascularization is vital for pregnancy outcomes, but assessing it with animal models and human explants has limitations. We introduce a 3D in vitro model of human placenta terminal villi including fetal mesenchyme and vascular endothelium. By coculturing HUVEC, placental fibroblasts, and pericytes in a macrofluidic chip with a flow reservoir, we generate fully perfusable fetal microvessels. Pressure-driven flow facilitates microvessel growth and remodeling, resulting in early formation of interconnected and lasting placental-like vascular networks. Computational fluid dynamics simulations predict shear forces, which increase microtissue stiffness, decrease diffusivity, and enhance barrier function as shear stress rises. Mass spectrometry analysis reveals enhanced protein expression with flow, including matrix stability regulators, proteins associated with actin dynamics, and cytoskeleton organization. Our model provides a powerful tool for deducing complex in vivo parameters, such as shear stress on developing vascularized placental tissue, and holds promise for unraveling gestational disorders related to the vasculature.

Une complication majeure de la pose d’un stent sur une plaque d’athérosclérose est la thrombose de stent, qui présente un taux de mortalité particulièrement élevé. La bithérapie antiplaquettaire, indiquée dans la prévention de cette complication, entraîne un risque important de saignement et n’est pas toujours efficace. L’objectif de ce travail de thèse a consisté à identifier les mécanismes de la thrombose de stent et à évaluer l’intérêt d’une nouvelle classe d'agents antiplaquettaires capables de la prévenir efficacement avec un risque hémorragique faible. Le développement d’un modèle macrofluidique original a permis de montrer que les stents carotidiens utilisés en clinique possèdent une thrombogénicité intrinsèque d’une part au niveau de la bifurcation, dans la lumière du vaisseau, et d’autre part au niveau des mailles en contact avec la paroi du vaisseau. Le dispositif a également mis en lumière un effet protecteur des mailles du stent sur la thrombose de stent. Enfin, le modèle a montré que le glenzocimab, un agent anti-GPVI, est aussi efficace dans la prévention de la thrombose de stent que les traitements de référence, mais sans risque de saignements
A major complication of stenting in a diseased artery is stent thrombosis, which has a particularly high mortality rate. Dual antiplatelet therapy, indicated to prevent this complication, possesses a high risk of bleeding and is not always effective. The aim of my PhD was to identify the mechanisms of stent thrombosis and to evaluate the interest of a new class of antiplatelet agents to efficiently prevent it with a low bleeding risk. The development of an original macrofluidic model has enabled us to show that the carotid stents used in clinical practice present an intrinsic thrombogenicity evidenced both at the bifurcation of a vessel where the stent meshes lie in the lumen, and around some specific places of the stent struts which are in contact with the vessel wall. The device also helped to identify a protective effect of the stent mesh, which reduces stent thrombosis. Finally, the model showed that glenzocimab, an anti-GPVI agent, is effective in preventing stent thrombosis to a similar extent than reference treatments, but with no bleeding risk

One of the most important boron minerals, colemanite is reacted with sulfuric acid to produce boric acid. During this reaction, gypsum (calcium sulfate dihydrate) is formed as a byproduct. In this study, the boric acid production was handled both in a batch and four continuously stirred slurry reactors (4-CFSSR&rsquo
s) in series system. In this reaction system there are at least three phases, one liquid and two solid phases (colemanite and gypsum). In a batch reactor all the phases have the same operating time (residence time), whereas in a continuous reactor all the phases may have different residence time distributions. The residence time of both the reactant and the product solids are very important because they affect the dissolution conversion of colemanite and the growth of gypsum crystals. The main aim of this study was to investigate the dynamic behavior of continuous flow stirred slurry reactors. By obtaining the residence time distribution of the solid and liquid components, the non-idealities in the reactors can be found. The experiments performed in the continuous flow stirred slurry reactors showed that the reactors to be used during the boric acid production experiments approached an ideal CSTR in the range of the stirring rate (500-750 rpm) studied. The steady state performance of the continuous flow stirred slurry reactors (CFSSR&rsquo
s) in series was also studied. During the studies, two colemanites having the same origin but different compositions and particle sizes were used. The boric acid production reaction consists of two simultaneous reactions, dissolution of colemanite and crystallization of gypsum. The dissolution of colemanite and the gypsum formation was followed from the boric acid and calcium ion concentrations, respectively. The effect of initial CaO/ SO42- molar ratio (1.00, 1.37 and 2.17) on the boric acid and calcium ion concentrations were searched. Also, at these initial molar ratios the colemanite feed rate was varied (5, 7.5, 10 and 15 g/min) to change the residence time of the slurry. Purity of the boric acid solution was examined in terms of the selected impurities, which were the magnesium and sulfate ion concentrations. The concentrations of them were compared at the initial molar ratios of 1.00 and 1.37 with varying colemanite feed rates. It was seen that at high initial CaO/ SO42- molar ratios the sulfate and magnesium ion concentrations decreased but the calcium ion concentration increased. The gypsum crystals formed in the reaction are in the shape of thin needles. These crystals, mixed with the insolubles coming from the mineral, are removed from the boric acid slurry by filtration. Filtration of gypsum crystals has an important role in boric acid production reaction because it affects the efficiency, purity and crystallization of boric acid. These crystals must grow to an appropriate size in the reactor. The growth process of gypsum crystals should be synchronized with the dissolution reaction. The effect of solid hold-up (0.04&ndash
0.09), defined as the volume of solid to the total volume, on the residence time of gypsum crystals was investigated and the change of the residence time (17-60 min) on the growth of the gypsum was searched. The residence time at each reactor was kept constant in each experiment as the volumes of the reactors were equal. The growth of gypsum was examined by a laser diffraction particle size analyzer and the volume weighted mean diameters of the gypsum crystals were obtained. The views of the crystals were taken under a light microscope. It was observed that the high residence time had a positive effect on the growth of gypsum crystals. The crystals had volume weighted mean diameters of even 240 µ
m. The gypsum crystal growth model was obtained by using the second order crystallization reaction rate equation. The residence time of the continuous reactors are used together with the gypsum growth model to simulate the continuous boric acid reactors with macrofluid and microfluid models. The selected residence times (20-240 min) were modeled for different number of CSTR&rsquo
s (1-8) and the PFR. The simulated models were, then verified with the experimental data. The experimentally found calcium ion concentrations checked with the concentrations found from the microfluid model. It was also calculated that the experimental data fitted the microfluid model with a deviation of 4-7%.