Conecte-se

Bibliografias temáticas / Integrated system

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Integrated system"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 18 de maio de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Integrated system".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Integrated system"

1

Sobieszczanski-Sobieski, Jaroslaw. "Integrated System-of-Systems Synthesis". AIAA Journal 46, n.º 5 (maio de 2008): 1072–80. http://dx.doi.org/10.2514/1.27953.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

VASYLKIVSKYI, MYKOLA, OKSANA HORODETSKA, OLEXANDER STALCHENKO e MYHAILO BUDASH. "INTEGRATED RADIO SCANNING AND COMMUNICATION SYSTEM". Herald of Khmelnytskyi National University. Technical sciences 319, n.º 2 (27 de abril de 2023): 56–63. http://dx.doi.org/10.31891/2307-5732-2023-319-1-56-63.

Texto completo da fonte

Resumo:

The article discusses ways to optimize the performance of information communication systems, which includes increasing spectral efficiency and reliability while minimizing delay and energy consumption due to the full integration of communication and scanning services. The functioning algorithm of the integrated scanning and communication system and the organization scheme of the communication mode using the scanning process based on the proposed generalized model of the integrated scanning and data transmission system are considered. Ways to improve the efficiency of telecommunication systems due to the joint use of communication and scanning tools with the best compromise between scanning characteristics and the bandwidth of the transmission channel are considered. Peculiarities of improving wireless communication systems with regard to high data transfer rates, low latency and wide connection possibilities are studied. In particular, access to other system functions, such as scanning/visualization and localization, is justified. Due to the considered innovative applications, the possibility of increasing the performance of the integrated wireless scanning and communication system (ISAC) is determined. The researched positioning process in 5G is proposed to be expanded due to additional detection functions, in particular with the use of new metrics such as accuracy and resolution. New KPIs in 6G networks are considered, replacing the KPI of positioning accuracy in 5G. As a result, key performance indicators based on different application scenarios are proposed, the accuracy of which should be from 1 to 10 cm, and the resolution should be up to 1 mm. The potential of the new ISAC technology was investigated, in particular, the features of the coexistence of communication and scanning modules in an integrated solution at the system level and methods of increasing the efficiency of coexistence at the system level were considered; justification of a positive result from an integrated system solution for communication and scanning services; advantages and disadvantages of existing communication and scanning systems with implemented integration at the system level. The obtained results of research on the integration of communication and scanning means, in particular: the analysis of the performance of generalized ISAC networks and the conclusions about the fundamental limits of performance obtained for a simple structure made it possible to determine the best compromise between the characteristics of scanning and the bandwidth of the communication channel, provided an opportunity to create practical schemes, which approximate a compromise of waveforms, coding tables, structures and protocols.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Cantos, Maria Cecilia G., Lorena W. Rabago e Bartlome T. Tanguilig. "Mobile Web-Based Student Integrated Information System". International Journal of Machine Learning and Computing 5, n.º 5 (outubro de 2015): 359–67. http://dx.doi.org/10.7763/ijmlc.2015.v5.534.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Levary, Reuven R., e Laurence A. Madeo. "Expert system-user integrated adaptive systems". Expert Systems with Applications 3, n.º 4 (janeiro de 1991): 489–98. http://dx.doi.org/10.1016/0957-4174(91)90174-d.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Creighton, Heather, Ron Allen, Scott Stewart e Steve Hayto. "Integrated Traffic System". Journal of Transportation Engineering 116, n.º 6 (novembro de 1990): 714–23. http://dx.doi.org/10.1061/(asce)0733-947x(1990)116:6(714).

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Bullock, Roger. "An Integrated System". Adoption & Fostering 30, n.º 1 (abril de 2006): 2. http://dx.doi.org/10.1177/030857590603000101.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Ricke, Darrell O., James Harper, Anna Shcherbina, Nelson Chiu e Tara Boettcher. "Integrated Biomedical System". F1000Research 7 (8 de fevereiro de 2018): 162. http://dx.doi.org/10.12688/f1000research.13601.1.

Texto completo da fonte

Resumo:

Background: Capabilities for generating and storing large amounts of data relevant to individual health and performance are rapidly evolving and have the potential to accelerate progress toward quantitative and individualized understanding of many important issues in health and medicine. Recent advances in clinical and laboratory technologies provide increasingly complete and dynamic characterization of individual genomes, gene expression levels for genes, relative abundance of thousands of proteins, population levels for thousands of microbial species, quantitative imaging data, and more – all on the same individual. Personal and wearable electronic devices are increasingly enabling these same individuals to routinely and continuously capture vast amounts of quantitative data including activity, sleep, nutrition, environmental exposures, physiological signals, speech, and neurocognitive performance metrics at unprecedented temporal resolution and scales. While some of the companies offering these measurement technologies have begun to offer systems for integrating and displaying correlated individual data, these are either closed/proprietary platforms that provide limited access to sensor data or have limited scope that focus primarily on one data domain (e.g. steps/calories/activity, genetic data, etc.). Methods: The Integrated Biomedical System is developed as a Ruby on Rails application with a relational database. Results: Data from multiple wearable monitors for activity, sleep, and physiological measurements, phone GPS tracking, individual genomics, air quality monitoring, etc. have been integrated into the Integrated Biomedical System. Conclusions: The Integrated Biomedical System is being developed to demonstrate an adaptable open-source tool for reducing the burden associated with integrating heterogeneous genome, interactome, and exposome data from a constantly evolving landscape of biomedical data generating technologies. The Integrated Biomedical System provides a scalable and modular framework that can be extended to include support for numerous types of analyses and applications at scales ranging from personal users, communities and groups, to potentially large populations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Zutshi, Ambika, e Amrik S. Sohal. "Integrated management system". Journal of Manufacturing Technology Management 16, n.º 2 (março de 2005): 211–32. http://dx.doi.org/10.1108/17410380510576840.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Schlenker, Berthold. "Integrated loudspeaker system". Journal of the Acoustical Society of America 127, n.º 2 (2010): 1170. http://dx.doi.org/10.1121/1.3326885.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Computer Associates. "Integrated graphics system". Computer-Aided Design 19, n.º 6 (julho de 1987): 332. http://dx.doi.org/10.1016/0010-4485(87)90309-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Integrated system"

1

Smith, Barry S. "Integrated inspection system in manufacturing : vision systems /". Master's thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-04272010-020147/.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Zeppettella, David L. "Structurally Integrated Embedded System". University of Dayton / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1324051784.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Hu, Feng-Ming. "Integrated Apartment Management System". CSUSB ScholarWorks, 2006. https://scholarworks.lib.csusb.edu/etd-project/3004.

Texto completo da fonte

Resumo:

The Integrated Apartment Management System (IAMS) is a web-based system that allows tenants to make appointments with repairmen on line and notify both apartment managers and repairmen of appointments through an email directly from IAMS. IAMS also keeps a database of appointments, repairs, and payments that can be accessed by tenants, repairmen, and apartment managers.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Khoo, N. K. "An integrated system for reconfigurable cellular manufacturing systems". Thesis, University of Liverpool, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.407215.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

ZEMINIANI, ELEONORA. "Sistemi multifunzionali integrati (Integrated multifunctional systems)". Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2507790.

Texto completo da fonte

Resumo:

This thesis was born in the context of a research activity conducted by Thales Alenia Space Italia, and called Integrated Multifunctional Systems. The name is quite self-explanatory: the research is devoted to the study of Multifunctional Systems (MFSs). The work hereafter described addresses MFSs combining thermal, structural, electronic, and control functionalities. The rationale behind this activity comes from a careful evaluation of mission drivers and constraints for space systems. In the last 30 years, studies have shown that the largest contributors of total spacecraft dry mass are two technology areas: structure and packaged electronics. This information indicates a potentially fruitful area of technology development that would provide significant spacecraft dry mass reduction. Possible interesting areas to be addressed are bus architectures, novel electronic packaging and layout, electronic chassis that also function as structural members, minimization of harness. Moreover, there is increasing interest in the unnoticeable distribution of thermal control and monitoring hardware throughout the system. The challenge is to meet mission requirements taking into account an integrated design that addresses all areas of structural, electrical, component packages, and thermal elements. In particular, for this thesis the aim was to identify different ways of combining electrical and thermal control functions with mechanical structures in order to create a multifunctional system able to save mass and volumes, and simplify integration. The goal of the work was to screen materials and technologies to be used for structural elements, thermal solutions, and integrated electronics, to conceive, design, manufacture, and test suitable prototypes, and to evaluate the application of multidisciplinary design and optimization techniques to this field. The work has been conducted in close collaboration with Thales Alenia Space Italia S.p.A. (TAS-I), and with the Jet Propulsion Laboratory (JPL)/California Institute of Technology (Caltech). Over a three year timespan, four different demonstrators have been considered: three of them have been developed with TAS-I, and one with JPL. In chronological order, the first prototype is the Advanced Bread Board (ABB), which is a thermostructural panel built in Carbon/Carbon and equipped with distributed electronics and sensors. The second prototype was implemented into three different demonstrators, SDA, SDB, and SDC (respectively, STEPS Demonstrator A, B, and C). They consist of an intelligent, modular, flat, and flexible motherboard which has been mounted on an aluminium sandwich panel, a curved aluminium plate, and a layer of Kevlar fabric. The third prototype is the ROV-E smart skin demonstrator, which is a development of the STEPS motherboard concept, and the fourth prototype is the JPL μRover, which consists of a small 4-wheeled robot made of thermostructural Printed Circuit Boards (PCBs). The four prototypes represent subsequent steps toward the realization of a multifunctional system where electronics in flex and rigid-flex form is bounded with structure. The goal is to achieve a more distributed architecture equipped with enough intelligence to handle communication, thermal/environmental control, and actuation. ABB is the first example, where small flat and flex boards with limited intelligence are mounted on a structural substrate with high thermomechanical performances. After the results obtained from ABB, the design flow is ideally split in two branches. The first research branch keeps on the development of flex electronics as a mean to integrate communication capabilities, health monitoring, signal and power harness on many different support materials: the STEPS demonstrators and the ROV-E smart skin concept are products coming from this approach. The STEPS demonstrators show increased dimensions, expanded capabilities, and higher level of on-board intelligence. The ROV-E smart skin brings these characteristics to their maximum extent: the design is focused on an extremely flexible board, able to monitor the surrounding structure and environment, able to actuate loads and to take care of signal and power distribution. On the other hand, the second research branch explores the possibility of using the electronic boards themselves (in rigid-flex configuration) as structural elements: the JPL μRover is the product of this approach. The micro rover is supposed to show the viability of eliminating electronic boxes by transferring all the components on the primary structure, which is therefore made of Printed Circuit Boards based on particular thermostructural materials. This thesis describes the work conducted for the development of integrated multifunctional systems from 2010 to 2012, and is divided in five main chapters, introduced by a preface. The preface itself presents the topic and scope of the work, and describes the research methodology used during activities. It also describes the structure of the thesis and acknowledges relevant contributions. The first chapter is dedicated to the literature review. Its goal is to explore the state of the art, to gather and summarize information on activities that have been performed up to now in the field of Multifunctional Systems. These activities are the foundations on which the work described in this thesis has been conceived, and represent the benchmark for the evaluation of achieved results. Therefore, a section is also included which contains a critical analysis of the activities most strictly related to this thesis. The second chapter presents how the research has been actually conducted, the activities regarding technology study and design, the factual implementation of concepts, the technical description of all different prototypes, and a first glance on results obtained. The third chapter describes in more detail all the findings, including test results and interpretation of data. The fourth chapter focuses on analysis and discussion of results and findings, with particular attention to their position in the context of the initial literature review and possible comparison with closest rivals. The fifth chapter draws conclusions and explains where further work is needed and which activities are going on to bring the multifunctional systems approach from the laboratory to the space vehicle. To broaden the discussion on given topics, or to give additional information on specific technologies, an appendix has been added.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Silvestre, Oscar R. F. "Biocompatible tumour implant systems : towards an integrated biophotonic system". Thesis, Cardiff University, 2011. http://orca.cf.ac.uk/55026/.

Texto completo da fonte

Resumo:

There is a need to perform comprehensive cell biology studies transferable across culture platforms using innovative cellular models. The higher purpose is to bridge the gap between in vitro cell culture and in vivo models. In this thesis a significant advance is presented in the embedding of an innovative optical biophotonic capability for the dynamic interrogation and single cell tracking of human osteosarcoma cells encapsulated in the hollow fiber (HF) platform. Two approaches have been implemented: quantum dot (QD) nanoparticles providing proliferative and cell cycle readouts and an in-fiber light illumination providing global features of particle and cell density. An in vitro HF encapsulation model was developed and characterised against standard two-dimensional tissue culture (TC) using the human osteosarcoma U-2 OS cell line expressing a cell cycle fluorescent reporter (cyclin Bl-GFP). Analysis of the packing and orientation of cells in the HF revealed that they grow like an anchorage dependent adherent layer. Overall cells in the fiber displayed a slower cell cycle traverse and a differential sensitivity to clinically relevant doses of the anticancer mitosis-inhibiting agent Taxol compared to cells under normal TC conditions. Comprehensive gene profiling, with bioinformatics and ontology network analysis, showed that the HF cells presented high steroid related but low differentiation gene expression. Specific biomarkers were indentified, and it is suggested that the HF model displays features that are closer to an in vivo tumour. A flow cytometry cell-tracking approach using QD labelling was validated and applied to the HF model for the first time. This represents an "embedded" biophotonic system where the QD sensors are integrated directly into the seeded cell population and then redistributed through the daughter cells, thus reflecting patterns of lineage expansion. This provides sub-population parameterized information on cell-cell heterogeneity and cell division. A biophotonic HF prototype comprising the integration of direct coupled-light excitation in the HF was conceived, this revealed the potential and limitations to detect die presence of cells inside the HF lumen by analysing light attenuation changes. Finally a "systems cytometry" acquisition concept has been proposed, comprising the use of embedded engineered nanoparticles as single cell "nano-memory" biophotonic intracellular probes.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Huang, Shi-Ming. "An integrated expert database system". Thesis, University of Sunderland, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.385011.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Çalkan, Ömer Faruk. "Intensified, integrated gasification system development". Thesis, University of Newcastle Upon Tyne, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.556131.

Texto completo da fonte

Resumo:

An intensified gasification system consisting of the gasifier reactor and the clean up system was developed for new feed stocks in pilot plant (ea. 50 kWe output). An industrial system (ea. 1 MWe capacity) scaled up from the pilot plant was also constructed and commissioned. PolyHIPE Polymers (PHP) both in laboratory and industrial scale were produced and functionalized/characterized for gas conditioning and water treatment processes associated with the gasifier operation. The gasification process converts any carbon-containing material into a combustible gas composed primarily of carbon monoxide, hydrogen and methane, which can be used as a fuel to generate electricity and heat. Gasification adds value to low or negative feed stocks by converting them to marketable fuels and products Two new feed stocks; bone meal and oil sludge, were gasified in small scale pilot plant gasifier system. The system performance was reliable and there were no major problems in operating the gasifier and performance of the instrumentation during the tests. The most important experimental objective which was to determine the producer gas quality during stabilized continuous runs was successfully achieved. The commissioning of the industrial scale gasifier system was completed during the course of this research. The initial results of commissioning tests which were performed by using wood chips, bone meal and municipal solid waste (MSW) are accounted in this study. The pre-treatment of these feed stock materials were studied as well as gasification characteristics. The main focus of commissioning runs was to evaluate the performance and efficiency of process instrumentation and determine the problems associated with the gasification and pre-treatment systems. The commissioning runs were successful in terms of achieving these main goals. The experiences transferred from the small scale gasification experiments were crucial in understanding and solving the problems associated with the system. The gas qualities from both scale of operation were very similar. 11 Production, modification and demonstration of the potential of polyHIPE polymers as an effective medium for water and gas treatment were also aimed in this study. It was shown that the functionalization of PolyHIPE Polymers could be intensified and the technique resulted in the formation of a new class of nano-structured micro-porous polymers with enhanced surface area and micro and nano-connectivity of the pores. Modification of the chemical and structural characteristics of the PHP was achieved by two novel methods of sulphonation which were developed by intensifying the principles of conventional techniques. Prior to sulphonation PHP demonstrates hydrophobic characteristics, where after sulphonation a hydrophilic form is produced. Sulphonated PHP can act as an ion exchange module and is capable of adsorbing species from a solution or a waste stream. The capability of the PHP as an efficient ion exchange module has been demonstrated by using a nickel solution as the model. The potential of the PHP as a filtering media was also realised by the results obtained in tests conducted with the waste scrubber water from the gasification system. Hydrophilicity is required if dehumidification of the gas streams are desired. The polymers containing 2-vinyl pyridine which were developed by the Process Intensification and Miniaturisation (PIM) Group in the University of Newcastle, already exhibits hydrophilic characteristics and do not require and modification. These polymers were tested for gas purification in a packed column. Production of these polymers in industrial scale was also accomplished. The ultimate aim of the research was to develop an intensified gasification system which employs PHP for both gas purification and water treatment. Gasification operation was successfully demonstrated in both small and industrial scale, as well as the demonstration of the potential of PHP in gas and water treatment processes in bench scale.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Wiest, James A., e Michael P. Hadley. "Integrated theater assessment profiling system". Thesis, Monterey, California. Naval Postgraduate School, 2002. http://hdl.handle.net/10945/5154.

Texto completo da fonte

Resumo:

Approved for public release, distribution is unlimited
The Integrated Theater Assessment Profiling System (iTAPS) takes the original stove-piped Theater Assessment Profiling System (TAPS) software solution and turns it into a robust, data-centric, web-based decision support system for Commander, Second Fleet. ITAPS uses the .Net Framework and ASP.NET/ADO.NET, along with SQL Server to provide a web-enabled application that gives an overarching, abstracted view of the battle space for the Operational Commander while still providing drill-down capability and trend analysis tools if more detail is desired. The software was developed using the extreme programming technique and black box testing methods. A demonstration was performed at Second Fleet to test its acceptability and usability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Amadi, A. O. "An integrated office information system". Thesis, Swansea University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383267.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Integrated system"

1

Scherzinger, Bruno M. Integrated navigation system design. [Markham, Ont.]: Honeywell, Advanced Technology Centre, Aerospace & Defence Group, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

United States. Dept. of Energy. RCRA/CERCLA Division, ed. Integrated risk information system. Washington, D.C: The Division, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

The integrated planning system. S.l: s.n., 2009.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Corporation, Psychological, ed. Integrated assessment system.: Swinging. San Antonio, Tex: Psychological Corporation, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Library, Cornwall County. Totally integrated library management system: System specification. Truro: Cornwall County Library, 1986.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Nolte, John. Elsevier's integrated neuroscience. Philadelphia: Mosby / Elsevier, 2007.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Valle, Maurizio, Dirk Lehmhus, Christian Gianoglio, Edoardo Ragusa, Lucia Seminara, Stefan Bosse, Ali Ibrahim e Klaus-Dieter Thoben, eds. Advances in System-Integrated Intelligence. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-16281-7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Rao, Ming, ed. Integrated System for Intelligent Control. Berlin/Heidelberg: Springer-Verlag, 1992. http://dx.doi.org/10.1007/bfb0006837.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Zardoshti, Pedram. A Computer integrated forging system. Birmingham: University of Birmingham, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Integrated network and system management. Wokingham, England: Addison-Wesley, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Integrated system"

1

Weik, Martin H. "integrated system". In Computer Science and Communications Dictionary, 803. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_9241.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Marcus, Elliott M., e Stanley Jacobson. "Limbic System". In Integrated Neuroscience, 489–515. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-1077-2_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Marcus, Elliott M., e Stanley Jacobson. "Visual System". In Integrated Neuroscience, 517–36. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-1077-2_23.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Marcus, Elliott M., e Stanley Jacobson. "Hypothalamus, Neuroendocrine System, and Autonomic Nervous System". In Integrated Neuroscience, 361–77. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4615-1077-2_16.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Levin, Mark Sh. "Integrated Security System". In Modular System Design and Evaluation, 331–38. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09876-0_15.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Riedl, Christoph. "Integrated System Design". In Tool-Supported Innovation Management in Service Ecosystems, 89–114. Wiesbaden: Gabler, 2011. http://dx.doi.org/10.1007/978-3-8349-6802-9_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Camargo, Anyela, e Jan T. Kim. "Integrated Biomarker System". In Encyclopedia of Systems Biology, 1036–37. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4419-9863-7_229.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Weik, Martin H. "integrated communications system". In Computer Science and Communications Dictionary, 799. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_9212.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Weik, Martin H. "integrated management system". In Computer Science and Communications Dictionary, 800. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_9225.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Zhang, Ting. "Integrated Data System". In Encyclopedia of Big Data, 574–76. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-319-32010-6_494.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Integrated system"

1

Sobieszczanski-Sobieski, Jaroslaw. "Integrated System-of-Systems Synthesis (ISSS)". In 11th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2006. http://dx.doi.org/10.2514/6.2006-7064.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Yeh, Shih-Ching, Albert Rizzo, Weirong Zhu, Jill Stewart, Margaret McLaughlin, Isaac Cohen, Younbo Jung e Wei Peng. "An integrated system". In the ACM symposium. New York, New York, USA: ACM Press, 2005. http://dx.doi.org/10.1145/1101616.1101628.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Steel, Paul J. "Integrated Quality System". In SAE Future Transportation Technology Conference and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1987. http://dx.doi.org/10.4271/871549.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Deak, Gabor J., Carlos S. Budahazi e Sérgio O. H. Marcon. "Maintenance Integrated System." In SAE Brasil. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1993. http://dx.doi.org/10.4271/931651.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Saucedo, V. E. "Integrated Wiring System". In International Pacific Air & Space Technolgy Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/912058.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Tonnesen, Harald A., Brit Berg, Oystein Stromsnes, Tore Kvalvaag e Sigbjorn Pedersen. "Integrated Drilling System". In Petroleum Computer Conference. Society of Petroleum Engineers, 1995. http://dx.doi.org/10.2118/30184-ms.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Zierolf, Michael L., Thomas Brinson e Andrew Fleming. "Integrated System Modeling". In SAE 2014 Aerospace Systems and Technology Conference. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2014. http://dx.doi.org/10.4271/2014-01-2117.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Patrick, G. "Integrated production system". In IEE Colloquium on Video File Servers: Masters or Slaves? IEE, 1996. http://dx.doi.org/10.1049/ic:19960689.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Liu, HanYu, e LongHua Mu. "Integrated protection on shipboard integrated power system". In 2011 IEEE International Conference on Advanced Power System Automation and Protection (APAP). IEEE, 2011. http://dx.doi.org/10.1109/apap.2011.6180524.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Yuan, Qing-Ke, Chen Xin, David Y. Yao e Wen G. Wang. "Integrated Quality System in Computer Integrated Manufacturing". In Future Transportation Technology Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-3101.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Integrated system"

1

Prater, Mary A. Integrated Cost Accounting System. Fort Belvoir, VA: Defense Technical Information Center, julho de 1992. http://dx.doi.org/10.21236/ada258587.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Smith, Greg, e Charles Gough. Advanced Integrated Traction System. Office of Scientific and Technical Information (OSTI), agosto de 2011. http://dx.doi.org/10.2172/1053785.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Schneider, S. Modular Integrated Video System. Office of Scientific and Technical Information (OSTI), outubro de 1989. http://dx.doi.org/10.2172/7248514.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Biagi, C., D. Bahar, B. Teheranian, J. Vetromile, W. J. Quapp, T. Bechtold, B. Brown, W. Schwinkendorf e G. Swartz. Integrated nonthermal treatment system study. Office of Scientific and Technical Information (OSTI), janeiro de 1997. http://dx.doi.org/10.2172/486061.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Author, Not Given. Integrated wind energy / Desalination system. Office of Scientific and Technical Information (OSTI), outubro de 2006. http://dx.doi.org/10.2172/1216726.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Hardy, B. INTEGRATED HYDROGEN STORAGE SYSTEM MODEL. Office of Scientific and Technical Information (OSTI), novembro de 2007. http://dx.doi.org/10.2172/921542.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Abeele, W., J. Nyhan, T. Hakonson, B. J. Drennon, E. A. Lopez, W. J. Herrera, G. Langhorst, J. L. Martinez e G. Trujillo. Low-level integrated system test. Office of Scientific and Technical Information (OSTI), fevereiro de 1986. http://dx.doi.org/10.2172/5995488.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Walker, Edward F., Christopher Barber, Buz Owen, John Zinky e Carl Howe. Integrated High Performance Distributed System. Fort Belvoir, VA: Defense Technical Information Center, dezembro de 1994. http://dx.doi.org/10.21236/ada292821.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Fujita, Mel. Smart Integrated Microsensor System (SIMS). Fort Belvoir, VA: Defense Technical Information Center, novembro de 1992. http://dx.doi.org/10.21236/ada259430.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Harstad, Ethan. An Integrated Online HAB System. Ames (Iowa): Iowa State University. Library. Digital Press, janeiro de 2015. http://dx.doi.org/10.31274/ahac.9758.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!