Teses / dissertações sobre o tema "Injected Volume"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 20 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "Injected Volume".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.
Jiang, Jinlin. "Mechanical control on fluid-induced aseismic slip : insights from injection experiment modeling". Electronic Thesis or Diss., Université Paris sciences et lettres, 2023. http://www.theses.fr/2023UPSLM056.
Texto completo da fonteFluid injections performed in the framework of geothermal exploitation can reactivate slip on preexisting crustal faults, leading to aseismic slip transients in turn triggering so-called triggered earthquakes. This PhD thesis is a numerical study dedicated to the physical control on the fluid-induced aseismic slip. A hydromechanical FEM is developed to simulate injection experiments performed in a tri-axial cell in the laboratory. The simulations presented allow to quantify the effect of the injection scenario, the hydraulic diffusivity, the fault friction and pre-stress on the dynamics of induced aseismic slip, providing new insights into the scaling laws commonly used to characterize this phenomenon, in particular the rupture speed and the maximum moment released. The approach presented here is thus of importance in the perspective of improving hazard mitigation in the context of geothermal exploitation. The model predictions are also validated on a real experimental dataset, which opens a new avenue to improve the mechanical interpretation of injection experiments in the laboratory
BOTMANS, CLAIRE. "Etude prospective, randomisee sur 100 cas de l'influence du volume injecte pour rachianesthesie a la bupivacaine". Reims, 1989. http://www.theses.fr/1989REIMM030.
Texto completo da fontePatouna, Stavroula. "A CFD STUDY OF CAVITATION IN REAL SIZE DIESEL INJECTORS". Doctoral thesis, Universitat Politècnica de València, 2012. http://hdl.handle.net/10251/14723.
Texto completo da fontePatouna, S. (2012). A CFD STUDY OF CAVITATION IN REAL SIZE DIESEL INJECTORS [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/14723
Palancia
Khaddour, Bassem. "Modélisation du champ électrique modifié par la charge d'espace injectée". Phd thesis, Grenoble INPG, 2006. http://tel.archives-ouvertes.fr/tel-00130130.
Texto completo da fonteNous utilisons la méthode des éléments finis MEF pour résoudre l'équation de Poisson et la méthode des caractéristiques MC pour résoudre l'équation de conservation de la charge. Les deux équations couplées sont résolues par approximations successives en redéfinissant le maillage structuré à chaque itération pour éliminer la diffusion numérique. La redéfinition du maillage structuré est la partie la plus importante du travail. L'algorithme converge bien pour différentes distributions de la charge définies sur la lame injectrice. Les solutions numériques obtenues pour une loi d'injection imposée sur la lame plate donnent des résultats en très bon accord avec les mesures de densité de courant sur l'électrode plane d'un dispositif lame-plan.
Brettar, Jonathan. "Développement de techniques optiques pour la caractérisation de brouillards de gouttes dans les foyers aéronautiques". Thesis, Toulouse, ISAE, 2015. http://www.theses.fr/2015ESAE0035/document.
Texto completo da fonteThe optimization of combustion chambers is generally carried out using numerical simulation tools.When fuel is injected in liquid form, the simulation quality depends on the boundary conditionsimposed to this phase close to the injector (diameter, velocity and volume flux of the droplets, slipvelocity between phases). These boundary conditions are usually set from an experimental analysisunder realistic conditions of injection, which in the best case uses Phase Doppler Anemo-granulometry(PDA). However, this point measurement technique is time consuming for an overall injectorcharacterization and provides a measurement of the volume flux with some limitations. It is alsodifficult to access variables such as the velocity of the gas phase in the presence of droplets. Toaddress this problem, it seems appropriate to implement spatially resolved optical diagnostictechniques. This study consists in the development of optical field techniques which combine approaches based onMie scattering, fluorescent emission from droplets or tracers and use PIV algorithms to characterizesimultaneously and quantitatively size, velocity and volume flux of the dispersed phase, and velocityof the continuous phase in droplet sprays in a realistic configuration of aeronautical injector. Aparticular attention is given to the study of the measurement accuracy. Thus, comparisons are carriedout with complete databases obtained with the PDA. The analysis of these results is faced withphysical optics models governing phenomena of fluorescence and light scattering by particles usingsimulations. This approach allows us to effectively interpret the results obtained by direct imaging anddefine acquisition and processing parameters ensuring optimum accuracy
Dhaliwal, Harpreet S. "Comparison of linear and injected impression material techniques to determine furcation volume of maxillary molars". 1997. http://catalog.hathitrust.org/api/volumes/oclc/48225663.html.
Texto completo da fonteKeesee, Patrick. "Comparison of linear and injected impression material techniques to determine furcation volume of mandibular molars". 1997. http://catalog.hathitrust.org/api/volumes/oclc/48225723.html.
Texto completo da fonteEspinel, Diaz Arnaldo Leopoldo. "Generalized Correlations to Estimate Oil Recovery and Pore Volumes Injected in Waterflooding Projects". Thesis, 2010. http://hdl.handle.net/1969.1/ETD-TAMU-2010-12-8886.
Texto completo da fonteLeonard, Anthony William. "The trapping of a gun-injected plasma by a tokamak". 1986. http://catalog.hathitrust.org/api/volumes/oclc/15288339.html.
Texto completo da fonteSteffen, Sara L. "Microtubule organization in mouse oocytes utilizing micro-injected sea urchin centrosomes". 1992. http://catalog.hathitrust.org/api/volumes/oclc/25985886.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 82-86).
Nytes, Andrew J. "Efficacy of recombinant bovine somatotropin injected daily in lactating dairy cows at three dosage levels". 1988. http://catalog.hathitrust.org/api/volumes/oclc/19104411.html.
Texto completo da fonteMather, Daniel K. "Modeling the use of air-injection for emissions reduction in a direct-injected diesel engine". 1995. http://catalog.hathitrust.org/api/volumes/oclc/32936694.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 65-70).
Snow, Rachel A. "The effects of cooled exhaust gas recirculation on a high-speed direct injected diesel engine". 2001. http://catalog.hathitrust.org/api/volumes/oclc/48248061.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 77-78).
Holguin, Ana Cristina. "Investigation of microflow machining effects on diesel injector spray characteristics". 2003. http://catalog.hathitrust.org/api/volumes/oclc/53143002.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 120-124).
Blobaum, Erica Lynn. "Quantification of spray characteristics associated with unique diesel injector nozzles". 2001. http://catalog.hathitrust.org/api/volumes/oclc/48160157.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 79-81).
Knox-Kelecy, Andrea Lyn. "Turbulent flow in a scale model of a diesel fuel injector nozzle hole". 1992. http://catalog.hathitrust.org/api/volumes/oclc/28738408.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 179-181).
Thiel, Matthew Paul. "Application of automated experiments to the optimization of a heavy-duty direct-injected diesel engine for the simultaneous reduction of NOx and particulate emissions". 2001. http://catalog.hathitrust.org/api/volumes/oclc/48273784.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 132-136).
Marshaus, Julie Gail. "Investigation of the injection characteristics of a new-generation digital hydraulic operating system fuel injector". 2002. http://catalog.hathitrust.org/api/volumes/oclc/51561351.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 152-156).
Muljadi, Anton. "Air-injectd clean-in-place (CIP) for milking systems Development for a study method and characterization of chemical, mechanical and thermal factors /". 1996. http://catalog.hathitrust.org/api/volumes/oclc/37328984.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 76-82).
Gracyalny, Eric J. ""Inject" and the modelling of energy and transport processes in a molten pool". 1994. http://catalog.hathitrust.org/api/volumes/oclc/32938217.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 83-87).