Bibliografias temáticas / In solidum

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "In solidum"

Autor: Grafiati
Publicado: 14 de dezembro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "In solidum".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "In solidum"

1

Skowerski, Szymon. "Czy zobowiązany in solidum może wystąpić z powództwem o ustalenie, że przez swoje działanie lub zaniechanie współdłużnik przyczynił się do powstania szkody w większym rozmiarze?" Biuletyn Stowarzyszenia Absolwentów i Przyjaciół Wydziału Prawa Katolickiego Uniwersytetu Lubelskiego 17, n.º 1 (14 de junho de 2022): 255–70. http://dx.doi.org/10.32084/bsawp.4409.

Texto completo da fonte
Resumo:
Pozycja prawna dłużników in solidum przy roszczeniach zwrotnych między nimi samymi nie jest zagadnieniem łatwym. Nie regulują jej w pełni przepisy obowiązującego prawa. Sama możliwość wystąpienia z powództwem o ustalenie przez jednego z dłużników solidarnych niewłaściwie stopnia przyczynienia się do powstania szkody w większym rozmiarze przeciwko współdłużnikom in solidum na gruncie art. 189 k.p.c. oraz swoboda sądu w określaniu roszczeń między dłużnikami in solidum jest uzależniona od wielu czynników. Celem niniejszego artykułu jest odpowiedź na przedstawiony powyżej problem, jak również wskazanie, jakie warunki muszą być spełnione przez powoda (tu dłużnika in solidum), by mógł skutecznie wystąpić z przedmiotowym powództwem.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Stunžėnas, Virmantas, Romualda Petkevičiūtė e Gražina Stanevičiūtė. "Phylogeny of Sphaerium solidum (Bivalvia) based on karyotype and sequences of 16S and ITS1 rDNA". Open Life Sciences 6, n.º 1 (1 de fevereiro de 2011): 105–17. http://dx.doi.org/10.2478/s11535-010-0101-6.

Texto completo da fonte
Resumo:
AbstractThe present work represents the first karyological and molecular characterisation of Sphaerium solidum, a rare European clam. Specimens of S. solidum were collected in Lithuania and Hungary. The modal diploid chromosome number found in both populations was 2n=30. Small, biarmed B chromosomes were found in 42.3% of cells studied in clams from Lithuania and in 11.8% of cells in clams from Hungary. Comparative analysis revealed no significant (P<0.05) interspecific differences in chromosome morphology of S. solidum and that of previously studied S. corneum. DNA sequence analyses of S. solidum showed no interpopulation differences in ITS1; moreover, only one site was different from ITS1 of S. corneum. However, differences in mitochondrial 16S sequence of S. solidum were revealed: two haplotypes in Lithuania and three in Hungary were identified. The genetic characteristics revealed in this study do not support ascription of S. solidum and S. corneum to different subgenus, Cyrenastrum and Sphaerium s. str., respectively. Comparative cytogenetic analysis disclosed that the chromosome morphology could be conserved in some sphaeriid species during speciation despite the fact that most other species in this family undergo radical karyotypic differentiation.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Kantor, Yuri I., e Boris I. Sirenko. "New species of Buccinum (Neogastropoda: Buccinidae) from the Kurile Islands". Ruthenica, Russian Malacological Journal 34, n.º 1 (2 de janeiro de 2024): 1–5. http://dx.doi.org/10.35885/ruthenica.2024.34(1).1.

Texto completo da fonte
Resumo:
The new species, Buccinum kosyanae sp. nov. is described from the Middle Kurile Islands. Previously the species was included in multigene molecular phylogeny of the genus [Kantor et al., 2022b] as B. cf. kobyakovae. The new name, B. fedosovi nom. nov. is proposed for Buccinum solidum Golikov et Sirenko, 1988, non Buccinum solidum Philippi, 1887.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Jansen, Martin, e Wolfgang Bensch. "Fachgruppenjubiläum: Perenne nil nisi solidum". Nachrichten aus der Chemie 71, n.º 9 (31 de agosto de 2023): 94–96. http://dx.doi.org/10.1002/nadc.20234137428.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Martínez-Aquino, Andrés, Jhonny Geovanny García-Teh, Fadia Sara Ceccarelli, Rogelio Aguilar-Aguilar, Victor Manuel Vidal-Martinez e M. Leopoldina Aguirre-Macedo. "New morphological and molecular data for Xystretrum solidum (Gorgoderidae, Gorgoderinae) from Sphoeroides testudineus (Tetraodontiformes, Tetraodontidae) in Mexican waters". ZooKeys 925 (8 de abril de 2020): 141–61. http://dx.doi.org/10.3897/zookeys.925.49503.

Texto completo da fonte
Resumo:
Adults of trematodes in the genus Xystretrum Linton, 1910 (Gorgoderidae, Gorgoderinae) are parasites found exclusively in the urinary bladders of tetraodontiform fishes. However, limited and unclear morphological data were used to describe the type species, X. solidum Linton, 1910. Here, we present the first detailed morphological information for a member of Xystretrum. Morphological characters were described using light and scanning electron microscopy (SEM) of Xystretrum specimens from Sphoeroides testudineus (Linnaeus) (Tetraodontiformes, Tetraodontidae), collected at six localities off the northern Yucatan Peninsula coast of the Gulf of Mexico. We also compared sequence fragments of the 28S (region D1–D3) ribosomal DNA and mitochondrial Cytochrome c oxidase subunit 1 (COI) gene with those available for other gorgoderine taxa. We assigned these Xystretrum specimens to X. solidum, despite the incompleteness of published descriptions. The data provide a foundation for future work to validate the identities of X. solidum, X. papillosum Linton, 1910 and X. pulchrum (Travassos, 1920) with new collections from the type localities and hosts. Comparisons of 28S and COI regions described here also provide an opportunity to evaluate the monophyletic status of Xystretrum.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Morada, Noel M. "Professor Estrella D. Solidum, 1927–2014". Philippine Political Science Journal 35, n.º 2 (3 de julho de 2014): 131–33. http://dx.doi.org/10.1080/01154451.2014.971940.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Miras, Jorge. "El ejercicio «in solidum» del ministerio parroquial". Ius Canonicum 29, n.º 58 (7 de fevereiro de 2018): 483–502. http://dx.doi.org/10.15581/016.29.18312.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Mendoza Alonzo, Pamela. "Obligaciones concurrentes o in solidum (Corte Suprema)". Revista de derecho (Valdivia) 31, n.º 1 (junho de 2018): 387–92. http://dx.doi.org/10.4067/s0718-09502018000100387.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Ankisetty, Sridevi, Shabana Khan, Bharathi Avula, Deborah Gochfeld, Ikhlas Khan e Marc Slattery. "Chlorinated Didemnins from the Tunicate Trididemnum solidum". Marine Drugs 11, n.º 11 (11 de novembro de 2013): 4478–86. http://dx.doi.org/10.3390/md11114478.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Naval, Jaime B. "Solidum: a seer of Southeast Asia and beyond". Philippine Political Science Journal 39, n.º 2 (4 de maio de 2018): 136–38. http://dx.doi.org/10.1080/01154451.2018.1529070.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "In solidum"

1

Lévesque, Frédéric. "L'obligation in solidum en droit privé québécois". Thesis, Université Laval, 2009. http://www.theses.ulaval.ca/2009/26341/26341.pdf.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Levesque, Frédéric. "L'obligation in solidum en droit privé québécois". Doctoral thesis, Université Laval, 2009. http://hdl.handle.net/20.500.11794/20977.

Texto completo da fonte
Resumo:
Tableau d’honneur de la Faculté des études supérieures et postdoctorales, 2009-2010
La présente thèse propose une étude complète de l'obligation in solidum en droit privé québécois. Elle en embrasse donc tous les aspects : origines, nature, justification, portée et effets. Elle cherche principalement à comprendre et à cerner cette notion (Partie 1) et à en préciser le régime ainsi que le champ d'application (Partie II). Pour éclairer notre analyse, nous retraçons les origines historiques de l'obligation in solidum en droit romain, en Ancien droit français et en droit français moderne. L'obligation in solidum telle qu'elle existe aujourd 'hui est formellement née en doctrine et en jurisprudence françaises au tournant du 20e siècle. Au Québec, avant le début du 21 e siècle, sa présence s'est avérée discrète et incertaine. Nous examinons également, quoique de manière moins systématique, la présence de l'obligation in solidum dans d'autres juridictions de tradition civiliste et en droit de tradition anglaise. Cet exercice nous a permis de construire notre vision de l'obligation in solidum, tout en exposant et critiquant celles des principaux auteurs français et québécois qui se sont intéressés au sujet, et ce de la fin des années 1800 jusqu'à aujourd'hui. À partir de la vision de l'obligation in solidum qui fut ainsi construite, nous avons dégagé le régime juridique de l'institution ainsi que son champ d'application en droit québécois. Par une étude et une comparaison systématique avec le régime de la solidarité, régime qui est prévu de façon détaillée par les législateurs québécois et français, nous proposons un régime juridique pour l'obligation in solidum. Après avoir ainsi posé ces assises générales, notre thèse est complétée avec des assises vraiment particulières au droit québécois. Le champ d'application de l'obligation in solidum est intimement lié dans tout système juridique à l'espace octroyé par le législateur et la jurisprudence à l'obligation solidaire. Le droit québécois diffère à cet égard de façon notable du droit français. Pourtant, le droit québécois a formellement reconnu l'obligation in solidum et la jurisprudence en fait maintenant un usage constant. En s'appuyant sur leur structure, leurs fondements théoriques et leurs effets pratiques, nous dégageons le champ d'application souhaitable de l'obligation solidaire et de l'obligation in solidum en droit privé québécois.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Combette, Céline. ""In solidum teneri" la solidarité en droit privé romain". Clermont-Ferrand 1, 2007. http://www.theses.fr/2007CLF10006.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Pulby, Baptiste. "Le régime de l’obligation in solidum à la dette douanière". Electronic Thesis or Diss., Normandie, 2024. http://www.theses.fr/2024NORMR054.

Texto completo da fonte
Resumo:
Cette thèse propose une étude du régime de l’obligation à la dette douanière lorsqu’elle implique plusieurs débiteurs, en se basant sur la notion d’obligation in solidum. Cette obligation a été retracée depuis ses origines pénales jusqu’à sa dégradation en un simple dérivé de l’obligation solidaire au XXe siècle. L’analyse des sources romaines met en lumière ses caractéristiques fondamentales de l’obligation in solidum, qui la singularisent de l’obligation solidaire. Sur le plan structurel, l’obligation in solidum se distingue par une structure reposant sur la pluralité d’objets individuels pour chaque codébiteur et une cause indivisible. L’étude avance une qualification contractuelle des actes douaniers particuliers, incluant des autorisations et des déclarations de placement, les définissant respectivement comme contrat-cadre et contrats d’application. Ces analyses révèlent une logique de bonne foi et introduisent le concept de « dol douanier communautaire » pour expliquer l’annulation des contrats entachés de mauvaise foi. Sur le plan de la dette douanière elle-même, les faits générateurs de l’obligation révèlent sa nature indivisible et les caractéristiques propres à une obligation in solidum. Chaque débiteur est personnellement responsable de l'intégralité de la dette, en raison de cette cause indivisible, tout en conservant des objets indépendants de la dette, structure qui rend le régime solidaire inapplicable. La distinction entre obligation solidaire et obligation in solidum se manifeste dans l’absence de bénéfices de discussion et de division, confirmant la nature in solidum de l’obligation douanière. La seconde partie explore les effets secondaires du régime in solidum de la dette douanière, comme la prescription, la remise de dette et la transaction. En matière de prescription, la pluralité des faits générateurs affecte les délais de prescription ainsi que la portée des effets relatifs des actes interruptifs ou suspensifs, illustrant le caractère indépendant des objets de l’obligation douanière. Quant à la remise de dette, l’analyse conclut que le créancier peut accorder une remise partielle sans affecter les autres débiteurs, en cohérence avec les principes de l’obligation in solidum. L’étude des causes d’extinction montre que la dette douanière, dotée de finalités indemnitaire et répressive, peut subsister malgré la disparition de sa cause indemnitaire si le débiteur a encouru des poursuites. Derrière ce régime européen d’apparence confuse et semblant dépourvu de logique se trouvait en réalité un régime d’obligation à pluralité de sujets, dont les propriétés fondamentales et structurelles constituaient des clés de compréhension, rendant perceptible l’essence logique qui en animait le fonctionnement. C’est à l’aune de cette découverte que nous sommes parvenus à valider l’hypothèse selon laquelle l’obligation à la dette douanière obéissait au régime de l’obligation in solidum, en ce qu’elle était pourvue des mêmes caractéristiques fondamentales et structurelles, que son fonctionnement obéissait à une logique semblable et enfin qu’elle produisait des effets principaux et secondaires identiques à cette institution romaine préjustinienne
This thesis focuses on the study of the regime governing customs debt obligations involving multiple debtors, based on the notion of in solidum obligation. This concept has been traced from its penal origins to its degradation as a mere derivative of solidary obligation in the 20th century. An analysis of Roman sources highlights the fundamental characteristics of in solidum obligation, which distinguish it from solidary obligation. Structurally, the in solidum obligation is characterized by a framework based on multiple individual objects for each co-debtor and an indivisible cause. The study advances a contractual qualification of specific customs acts, including authorizations and placement declarations, defining them respectively as a framework contract and application contracts. These analyses reveal a logic of good faith and introduce the concept of “community customs fraud,” explaining the annulment of contracts tainted by bad faith. Regarding customs debt itself, the obligation’s triggering events reveal its indivisible nature and the characteristics inherent to an in solidum obligation. Each debtor is personally responsible for the entire debt due to this indivisible cause, while maintaining independent objects within the debt, making the solidarity regime inapplicable. The distinction between solidary obligation and in solidum obligation is apparent in the absence of the benefits of discussion and division, confirming the in solidum nature of the customs debt obligation. The second part explores secondary effects of the in solidum customs debt regime, such as prescription, debt remission, and transaction. In terms of prescription, the plurality of triggering events affects both the prescription periods and the relative effects of interruptive or suspensive acts, illustrating the independent character of customs debt objects. Regarding debt remission, the analysis concludes that the creditor may grant partial remission without impacting other debtors, aligning with the principles of in solidum obligation. The study of extinction causes shows that customs debt, endowed with indemnifying and punitive purposes, may persist despite the disappearance of its indemnifying cause if the debtor is subject to prosecution. Behind this seemingly complex and illogical European regime lies a multi-subject obligation system, whose fundamental and structural properties offer key insights, revealing the underlying logic driving its function. This discovery allowed us to validate the hypothesis that customs debt obligation adheres to the in solidum obligation regime, as it shares the same fundamental and structural characteristics, operates under a similar logic, and ultimately produces both primary and secondary effects identical to this pre-Justinian Roman institution
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Mignot, Marc. "Les obligations solidaires et les obligations in solidum en droit privé français /". Paris : Dalloz, 2002. http://catalogue.bnf.fr/ark:/12148/cb38800872x.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Mignot, Marc. "Les obligations solidaires et les obligations "in solidum" en droit privé français". Dijon, 2000. https://buadistant.univ-angers.fr/login?url=https://bibliotheque.lefebvre-dalloz.fr/secure/isbn/9782247092789.

Texto completo da fonte
Resumo:
Selon l'analyse classique, l'obligation solidaire et l'obligation in solidum sont conçues comme des obligations au total stricto sensu. Chaque codébiteur est censé être débiteur principal de l'intégralité de la dette. Autrement dit, ces deux types d'obligation donneraient naissance à un faisceau d'obligations au total principales groupées autour d'un même objet. Une analyse plus poussée de la matière révèle que cette vision travestit leur vraie nature juridique. Depuis longtemps déjà, l'obligation solidaire et l'obligation in solidum n'appartiennent plus à la catégorie des obligations au total stricto sensu mais à celle des obligations au total lato sensu. Elles doivent être qualifiées de la sorte parce qu'elles permettent effectivement au créancier d'exiger de chaque codébiteur le paiement de toute la dette. Cependant, cet effet n'est pas dû au fait que chacun est tenu en qualité de débiteur principal par une obligation principale au total, mais parce que le faisceau d'obligations qui en découle combine des obligations principales et des obligations de garantie accessoires aux premières. Souvent, les coobligés se garantissent réciproquement et sont tenus a la fois par une obligation principale pour une fraction de la dette globale et par une obligation de garantie pour le surplus. Chacun agit pour partie à titre de débiteur principal et pour partie à titre de garant des autres codébiteurs. Par ailleurs, l'obligation solidaire et l'obligation in solidum connaissent d'autres schémas explicatifs : la garantie simple, la garantie mutuelle au second degré ou la garantie simple appliquée à une garantie mutuelle.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Mbanyana, Nokuthula. "Taxonomy, phylogeny and biogeography of seed-harvesting ants in the Tetramorium solidum-group (Hymenoptera: Formicidae)". Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80163.

Texto completo da fonte
Resumo:
Thesis (MSc)--Stellenbosch University, 2013.
Ants emerged during the Cretaceous Period more than 100 million years ago (Grimaldi & Engel 2005; Perrichot et al. 2008) and diversified independently on different landmasses following the Early Cretaceous fragmentation of Pangaea (Grimaldi & Agosti 2000). Today, ants represent one of the most ecologically successful groups globally (Wilson 1987), and their diversity far exceeds that of other social insects (Hölldobler & Wilson 1990). Currently 21 subfamilies, 305 genera and 12465 recorded ant species exist (Bolton 2012). Ants occur in almost all terrestrial habitats (Brown 2000) and are not uniformly distributed across regions, biomes and continents. As with all other taxa, historical abiotic factors have played a major role in their diversification and biogeographic structure (Tolley et al. 2006), including climatic changes (Holldobler & Wilson 1990) and the necessity to adapt to new environmental conditions (Tolley et al. 2006). Many global areas still lack data on regional biodiversity and the historical processes that may have shaped it. This is particularly so for southern Africa where the ant fauna is still relatively poorly known (Robertson 2000) and where there have been no published biogeographic analyses for any ant taxon. There is a highly endemic ant fauna that has evolved in the dry regions of southern Africa, which shows unique adaptations to the extreme thermal niches of these regions. For example, ants in the genus Ocymyrmex have adapted to forage on barren ground at temperatures as high as 67 ºC, when most insects and other arthropods are unable to survive (Marsh 1985). Ocymyrmex have long legs and usually hold the head, thorax and gaster high above the substrate, which helps with body temperature regulation. These ants are most active at the hottest time of the day and they move very rapidly. For example, O. barbiger has been observed running at speeds of 23 m/min (Marsh, 1985). In some ant species such extreme temperatures may limit foraging activity (Ward, 2007) but, in the case of Ocymyrmex, adaptations to this extreme thermal niche allowed exploitation of resources (dead and heat stressed arthropods). Moreover, these ants have subterranean nests that are ideal to escape environmental extremes and to move their brood deeply under the ground (Marsh, 1985). The distribution of some ant taxa in these dry regions closely reflects borders between particular biomes. For instance, in South Africa the ponerine ant, Pachycondyla hottentota, and the sugar ant, Camponotus storeatus, follow the borders of the Nama and Succulent Karoo biomes respectively (Robertson 2000). In the light of this background the overall objective of this study is to revise the taxonomy and determine the historical drivers of diversification in an important group of arid-adapted ants, the Tetramorium solidum-group, which is mainly restricted to dry semi-desert areas in southern Africa. Members of the Tetramorium solidum-group are commonly encountered seed harvesters yet despite their apparent ecological importance, their taxonomy and biogeography remains largely unresolved. Thirty years elapsed since the last revision of the group by Bolton (1980) and since, ant surveys have considerably expanded the material available for study and provide an opportunity for a fresh perspective on this group. The specific aims of this project were twofold: 1) to revise the species of the Tetramorium solidum-group; and 2) to explore the phylogenetic relationships among members of the group and the bioclimatic factors restricting their current distributional ranges in southern Africa. My study is timely, as to date no attempt has been made to unravel the history of arid-adapted ant diversification in southern Africa. Such information is much needed for identifying areas of high species diversity and endemism (Azuma et al. 2006) and prioritizing areas for conservation (Faith 1992). The thesis consists of three chapters. In chapter one I use morphological characters to review the current taxonomy of the Tetramorium solidum-group. From these data I have compiled an updated identification key for the group and described five new species. In chapter two I have constructed a fossil-calibrated dated phylogeny for Tetramorium solidum-group species in order to explore the historical processes that may have contributed in structuring the current distribution patterns and endemism within and among the species of the group. In this chapter I also explore bioclimatic factors that may restrict the current distribution of members on the Tetramorium solidum-group, using correlative bioclimatic modeling approaches. Chapter three provides a brief and overall conclusion to the study.
Financial support from NRF
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hoang, Thi Hai Yen. "L'obligation solidaire en droit vietnamien : Réflexions comparatives franco-vietnamiennes sur le droit des obligations". Thesis, Montpellier 1, 2014. http://www.theses.fr/2014MON10008/document.

Texto completo da fonte
Resumo:
Bien que la solidarité en droit civil français, qui puise ses origines en droit romain, ait été importée dans les Codes civils coloniaux du Vietnam, elle n'est pas adoptée par le droit civil moderne du Vietnam. L'obligation solidaire présentée par le droit civil vietnamien est particulièrement originale. Elle s'écarte du droit civil français ainsi que du droit romano-germanique. Il existe une équivalence fonctionnelle entre l'obligation solidaire en droit vietnamien et la solidarité en droit français. La principale différence est l'absence des effets secondaires de l'obligation solidaire en droit civil vietnamien. Quant à l'obligation in solidum en droit civil français, celle-ci a un équivalent fonctionnel dans la responsabilité solidaire en droit civil vietnamien. Cependant, si l'obligation in solidum en droit civil français présente à la fois une pluralité de sources et une unité de source, la responsabilité solidaire en droit civil vietnamien ne connait qu'une unité de source. La mondialisation du droit et le vent de réformes du droit des obligations en Europe au sein de laquelle la France se trouve, apportent une chance pour que l'obligation solidaire en droit civil du Vietnam puisse s'approcher de la solidarité du droit civil occidental en général et du droit civil français en particulier
The obligation solidaire in French civil law took its origins from Roman law. This law was imported to Colonial Civil Codes of Vietnam, however it was not adopted by the modern civil law of Vietnam. The joint and several obligation presented by the Vietnamese civil law is original. It diverges from the French civil and Romano-Germanic law. The joint and several obligation in Vietnamese private law is functional equivalence to the obligation solidaire in French private law. The main difference is the absence of the secondary effects on the joint and several obligation in Vietnamese civil law. Due to the obligation jointly and severally in French civil law, it has a functional joint and several liability in Vietnamese civil law equivalent. However, if the obligation in solidum in French civil law has both a plurality of sources and a source unit; joint and several liability in Vietnamese civil law recognizes a source unit. The trend of globalization of law and selling reform of contract law in Europe in which France finds itself, provide an opportunity for the joint and several liability in civil law of Vietnam can approach the solidarity of civil law West in general and the French civil law in particular
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Hiriart, Hélène. "La répartition des responsabilités dans les chaînes translatives de propriété". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0305.

Texto completo da fonte
Resumo:
L’objectif de la thèse est de réévaluer de façon globale la pertinence et la cohérence de la construction légale et jurisprudentielle actuelle organisant les recours dans les chaînes translatives de propriété. En dépit de contributions doctrinales nombreuses, les solutions se sont accumulées sans que leur articulation soit précisément examinée. L’enjeu de cet examen est d’autant plus important que le contexte général a changé (responsabilité du fait des produits, remise en cause des actions contractuelles, projets de réforme du droit de la responsabilité). L’étude est organisée autour de deux types de dommages : le dommage strictement contractuel et le dommage non strictement contractuel. La première partie évalue le droit positif et ses incertitudes (fondement de l’action directe, opposabilité des clauses de responsabilité au sous-acquéreur, recours en contribution etc.), au regard du manquement strictement contractuel (atteinte à l’utilité du contrat). La seconde partie permet de mettre en lumière les difficultés d’articulation des diverses actions désignées pour réparer le dommage non strictement contractuel, ces difficultés nous conduisant à nous interroger sur la nature de la responsabilité qui doit présider, dans les chaînes translatives de propriété, à la réparation des atteintes au contractant. L’ensemble de ces questions permet enfin d’identifier les grands critères et les logiques communes de répartition des responsabilités dans les chaînes translatives de propriété
The purpose of this thesis is to reexamine on a global scale the adequacy and consistency of the current jurisprudential and legal framework related to the contract chains’ liability cases. Despite a large number of doctrinal contributions, the solutions have indeed been aggregated without any underlying logical implication being further investigated. This type of considerations is becoming all the more impactful that the legal environment has evolved. The goal of the first part is to assess the current state of the law and its uncertainties (the direct action ground, enforceability of limitation clause to consumer, contribution to the debt among co-debtors) when it comes to the pure contractual injury, that is when the usefulness of the contract is to be jeopardized. The second part is focuses on how it is hard to articulate the different actions in order to repair non-pure contractual injury. The assessment of those difficulties will bring us to wonder which nature of liability should prevail to repair injuries within property chains. Finally, answering those questions will lead us to identify the major criteria and the common rationales used to spread liability within property chains
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Castillo, Adriana. "Structure et mobilité ionique dans les matériaux d’électrolytes solides pour batteries tout-solide : cas du grenat Li7-3xAlxLa3Zr2O12 et des Nasicon Li1.15-2xMgxZr1.85Y0.15(PO4)3". Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLX107/document.

Texto completo da fonte
Resumo:
L’un des enjeux pour le développement des batteries tout-solide est d’augmenter la conductivité ionique des électrolytes solides. Le sujet de la thèse porte sur l’étude de deux types de matériaux d’électrolytes solides inorganiques cristallins: les Grenat Li7- 3xAlxLa3Zr2O12 (LLAZO) et les Nasicon Li1.15- 2xMgxZr1.85Y0.15(PO4)3 (LMZYPO). L’objectif de cette étude est de comprendre dans quelle mesure les propriétés conductrices des matériaux étudiés sont impactées par des modifications structurales générées soit par un procédé de traitement particulier, soit par une modification de la composition chimique, et ce grâce au croisement des données structurales acquises par diffraction des rayons X (DRX) et Résonance Magnétique Nucléaire (RMN) MAS avec des données de dynamique des ions déduites de mesures de RMN en température et de spectroscopie d’impédance électrochimique (SIE).Les poudres ont été synthétisées après optimisation des traitements thermiques par méthode solide-solide ou solgel. La densification des pastilles utilisées pour les mesures de conductivité ionique par SIE a été réalisée par la technique de frittage Spark Plasma Sintering (SPS).Dans le cas des grenats LLAZO, l’originalité de notre travail est d’avoir montré qu’un traitement de frittage par SPS, au-delà de la densification attendue des pastilles, engendre également des modifications structurales qui ont des conséquences directes sur la mobilité des ions lithium dans le matériau et par conséquent sur la conductivité ionique. Une augmentation franche de la dynamique microscopique des ions lithium après frittage par SPS a en effet été observée par des mesures en température de RMN de 7Li et le suivi des constantes de relaxation.La deuxième partie de l’étude constitue un travail exploratoire sur la substitution de Li+ par Mg2+ dans LMZYPO. Nous avons ainsi étudié les propriétés de conduction ionique de ces composés mixtes Li/Mg, en parallèle d’un examen minutieux des phases cristallines formées. Nous avons notamment montré que la présence de Mg2+ favorise la formation des phases β’ (P21/n) et β (Pbna) moins conductrices ce qui explique la diminution de la conductivité ionique avec le taux de substitution de Li+ par Mg2+ observée dans ces matériaux de type Nasicon.Nos travaux soulignent donc l’importance primordiale des effets de structure sur les propriétés de matériaux d’électrolytes solides de type céramique
One of the issues for the development of all-solid-state batteries is to increase the ionic conductivity of solid electrolytes. The thesis work focuses on two types of materials as crystalline inorganic solid electrolytes: a Garnet Li7-3xAlxLa3Zr2O12 (LLAZO) and a Nasicon Li1.15-2xMgxZr1.85Y0.15(PO4)3 (LMZYPO). The objective of this study is to understand to what extent the conduction properties of the studied materials are impacted by structural modifications generated either by a particular treatment process, or by a modification of the chemical composition. Structural data acquired by X-ray diffraction (XRD) and Magic Angle Spinning (MAS) Nuclear Magnetic Resonance (NMR) were then crossed with ions dynamics data deduced from NMR measurements at variable temperature and electrochemical impedance spectroscopy (EIS).The powders were synthesized after optimizing thermal treatments using solid-solid or sol-gel methods. Spark Plasma Sintering (SPS) technique was used for the densification of the pellets used for ionic conductivity measurements by EIS.In the case of garnets LLAZO, the originality of our work is to have shown that a SPS sintering treatment, beyond the expected pellets densification, also generates structural modifications having direct consequences on the lithium ions mobility in the material and therefore on the ionic conductivity. A clear increase of the lithium ions microscopic dynamics after SPS sintering was indeed observed by variable temperature 7Li NMR measurements and the monitoring of the relaxation times.The second part of the study provides an exploratory work on the substitution of Li+ by Mg2+ in LMZYPO. We studied the ionic conduction properties of these mixed Li/Mg compounds, in parallel with a fine examination of the crystalline phases formed. We have showed in particular that the presence of Mg2+ favors the formation of the less conductive β’ (P21/n) and β (Pbna) phases, which explains the decrease of the ionic conductivity with the substitution level of Li+ by Mg2+ observed in these Nasicon type materials.Our work therefore highlights the crucial importance of structural effects on the conduction properties of ceramic solid electrolyte materials
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "In solidum"

1

Seitz, Frederick. The modern theory of solids. New York: Dover Publications, 1987.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Descartes, René. Exercises pour les éléments des solides: Essai en complément d'Euclide = Progymnasmata de solidorum elementis. Paris: Presses universitaires de France, 1987.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Català, Víctor. Solitud. 2a ed. Barcelona: Edicions 62, 2005.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Català, Víctor. Solitud. Barcelona: Edicions 62, 1998.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Català, Víctor. Solitud. Barcelona: Edicions 62, 1990.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Català, Víctor. Solitud. Barcelona: Edicions de la Magrana, 1996.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Català, Víctor. Solitud. Lleida: Pagès, 2007.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Harrison, Walter A. Electronic structure and the properties of solids: The physicsof the chemical bond. New York: Dover Publications, 1989.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Garcia, Hector H., e S. Manuel Marti£nez M. Taenia solium: Taeniasis/cysticercosis. 2a ed. Lima, Peru£: Editorial Universo, 1999.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ak'abal, Humberto. Tukelal: Solitud. Momostenango, Totonicapán, Guatemala: Solomanoyo, 2010.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "In solidum"

1

Cleaves, Henderson James. "Solidus". In Encyclopedia of Astrobiology, 1537. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-11274-4_1467.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Cleaves, Henderson James. "Solidus". In Encyclopedia of Astrobiology, 2292. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44185-5_1467.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Cleaves, Henderson James. "Solidus". In Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-642-27833-4_1467-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Cleaves, Henderson James. "Solidus". In Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-27833-4_1467-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Cleaves, Henderson James. "Solidus". In Encyclopedia of Astrobiology, 2793. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65093-6_1467.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Graham, R. A., e N. N. Thadhani. "Solid State Reactivity of Shock-Processed Solids". In Shock Waves in Materials Science, 35–65. Tokyo: Springer Japan, 1993. http://dx.doi.org/10.1007/978-4-431-68240-0_3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Zhang, Guo-Xin, Yu-Kun Lai e Shi-Min Hu. "Efficient Solid Texture Synthesis Using Gradient Solids". In Computational Visual Media, 67–74. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34263-9_9.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Neubronner, Matthias, Thomas Bodmer, Christof Hübner, Paul Bernd Kempa, Evangelos Tsotsas, Axel Eschner, Günther Kasparek et al. "D6 Properties of Solids and Solid Materials". In VDI Heat Atlas, 551–614. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-77877-6_26.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Garrett, Steven L. "Elasticity of Solids". In Understanding Acoustics, 179–233. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44787-8_4.

Texto completo da fonte
Resumo:
Abstract If a solid is initially at rest and equal and opposing forces are applied to that object, Newton’s Second Law guarantees that the object will remain at rest because the net force on the sample is zero. If that object is an elastic solid, then those forces will cause the solid to deform by an amount that is directly proportional to those applied forces. When the forces are removed, the sample will return to its original shape and size. That reversibility is the characteristic that is required if we say the behavior of the solid is “elastic.” This chapter will quantify the elastic behavior of solids by introducing the concepts of stress and strain and expressing their linear relationship through the definition of elastic moduli that depend only upon the material and the nature of the deformation and not upon the shape of the object. Those concepts allow us to generalize Hooke’s law. As before, the combination of a linear equation of state with Newton’s Second Law will now describe wave motion in solids. The introduction of a relaxation time, through the Maxwell model, will let these results be generalized to viscoelastic materials and then be applied to rubber vibration isolators.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ringelmann, R., e Beate Heym. "Taenia solium". In Parasiten des Menschen, 237–38. Heidelberg: Steinkopff, 1991. http://dx.doi.org/10.1007/978-3-642-85397-5_87.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "In solidum"

1

Bashmakova, Olena. "Ave corpus solidum: the presence and evasiveness of the body in psychoanalysis". In Psychoanalysis and the Virtual: ethics, metapsychology and clinical experience of the remote practice. N-DSA-N, 2021. http://dx.doi.org/10.32437/pvemcerpdppp0005.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Pétiová, Veronika. "Riešeniu problému nedostatku farárov v platnom kánonickom práve správou farností in solidum". In Naděje právní vědy 2022. University of West Bohemia, Czech Republic, 2023. http://dx.doi.org/10.24132/zcu.nadeje.2022.480-486.

Texto completo da fonte
Resumo:
The Church is increasingly facing the problem of a shortage of priests, and there is the expectation that this problem will grow in the future. In some countries many parishes are already without a priest and this situation needs to be addressed. The current Code of Canon Law offers the possibility of parish administration in a so-called solidarity way. In this paper we would like to analyse the institute of parish administration in solidum, which is found only in the current Code of Canon Law, whereas the previous legislation did not recognise this institute. At the same time, we want to gain insight from the experience of some countries that use this model of parish pastoral care, in contrast to the Slovak dioceses, which only take an exceptional approach to it. It is anticipated that in a couple of decades, due to the need for a shortage of priests, there will be a growing need to address the staffing of parishes in this way as well.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Phillips, Victor. "Smart Centrifuge for Solid Answers to Solids Control". In IADC/SPE Drilling Conference. Society of Petroleum Engineers, 1998. http://dx.doi.org/10.2118/39378-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Ramaswami, Krishnan, Yasushi Yamaguchi e Fritz B. Prinz. "Spatial partitioning of solids for solid freeform fabrication". In the fourth ACM symposium. New York, New York, USA: ACM Press, 1997. http://dx.doi.org/10.1145/267734.267814.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

O’Hern, T. J., S. M. Trujillo, J. B. Oelfke, P. R. Tortora e S. L. Ceccio. "Solids-Loading Measurements in a Gas-Solid Riser". In ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56602.

Texto completo da fonte
Resumo:
Gas-solid multiphase flows are commonly used in chemical processing, petroleum fluid catalytic cracking, and other industrial applications. The distribution of the solid phase in gas-solid flows (generally in the form of small particles) is seldom uniform, but more commonly involves clusters, streamers, and core-annular distributions, depending on the flow orientation and the overall gas and solid flowrates and their ratio. For this reason, tomographic techniques are of great interest for measurement of cross-sectional solids distributions in such flows. The cross-sectional profiles of solids loading can be integrated to yield a cross-sectionally averaged solids loading. Determination of this averaged solids loading is needed to understand the axial variations of solids loading and its sensitivity to flow parameters and to optimize performance. A common technique for determining volume-averaged solids loading in vertical flows like the riser section of a circulating fluidized bed (CFB) is by measurement of the time-averaged axial pressure gradients along the riser axis (differential pressure or ΔP method). Neglecting acceleration and wall friction, the axial momentum balance simplifies to equate the multiphase hydrostatic pressure term with the pressure gradient along the axis. Many authors (e.g., Louge and Chang, 1990) have pointed out the neglected terms in this approach and generally show that ΔP is applicable in the special cases of no solids-loading gradient (fully developed flow) or small solids flux. A more generally applicable technique for measuring solids loading in gas-solid flows is gamma tomography. A gamma tomography system using a 100-mCi Cs-137 source collimated into a fan beam and an array of scintillation detectors, has been developed and implemented for application to a cold-flow (non-reacting) CFB. The CFB has a 14-cm-ID 6-m tall riser, and is currently operated with a multiphase mixture of air and fluid catalytic cracking (FCC) catalyst particles. Typical operating conditions include mean superficial gas velocities up to 7.4 m/s and solids fluxes up to approximately 100 kg/m2·s. Quantitative comparison of gamma- and ΔP-determined solids loadings was made over a range of operating conditions (combination of superficial gas velocity and solids flux). Results indicate that the differences between gamma and ΔP-determined cross-sectionally averaged solids loading are most pronounced near the base of the riser, where solids concentration is highest and the mixture is accelerating. Higher in the riser, the agreement is better. Additionally, the difference is larger in cases of higher superficial gas velocity. In addition, several studies were performed to design an electrical-impedance tomography (EIT) system for a gas-solid flow to collect data suitable for validating computational models. A two-electrode bulk impedance system was studied experimentally. The required accuracy, spatial resolution and temporal resolution of an EIT system are addressed, and modeling and reconstruction are discussed. Bulk solid volume fractions measured by the two-electrode system and by gamma-densitometry tomography are in general agreement. Experiments with the two-electrode system also show that the Maxwell-Hewitt relation, used to convert the mixture impedance to solid volume fraction, must be applied carefully, paying attention to the identity of the dispersed and continuous phases. The design of a 16-electrode system is also described.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Severino, Jose G., Luis Eduardo Gomez, Shoubo Wang, Ram S. Mohan e Ovadia Shoham. "Mechanistic Modeling of Solids Separation in Solid/Liquid Hydrocyclones". In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2009. http://dx.doi.org/10.2118/124499-ms.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Cecchetti, Ethan, Fan Zhang, Yan Ji, Ahmed Kosba, Ari Juels e Elaine Shi. "Solidus". In CCS '17: 2017 ACM SIGSAC Conference on Computer and Communications Security. New York, NY, USA: ACM, 2017. http://dx.doi.org/10.1145/3133956.3134010.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Ribelles, José, Paul S. Heckbert, Michael Garland, Tom Stahovich e Vinit Srivastava. "Finding and Removing Features From Polyhedra". In ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/dac-21068.

Texto completo da fonte
Resumo:
Abstract Geometric models of solids often contain small features that we would like to isolate and remove. Examples include bumps, holes, tabs, notches, and decorations. Feature removal can be desirable for numerous reasons, including economical meshing and finite element simulation, analysis of feature purpose, and compact shape representation. In this work, an algorithm is presented that inputs a polyhedral solid, identifies and ranks its candidate features, and outputs solid models of the feature and the original object with the feature removed. Ranking permits a user or higher level software to quickly find the most desirable features for the task at hand. Features are defined in terms of portions of the surface that are classified differently from the rest of the solid’s surface with respect to one or more split planes. This approach to feature definition is more general than many previous methods, and generalizes naturally to quadric surfaces and other implicit surfaces.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Couvrat, N., Y. Cartigny e G. Coquerel. "Influence of solid/vapour equilibria on the stability of organic solids". In XXXV JEEP – 35th Conference on Phase Equilibria. Les Ulis, France: EDP Sciences, 2009. http://dx.doi.org/10.1051/jeep/200900012.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Antunes, André M., Mukhtar Hussain, Joana Alves, Gonçalo Vaz, Hugo Pires, Marco Peres, Katharina Lorenz et al. "Shining light on solids: a TDDFT study of solid-state HHG". In Compact Radiation Sources from EUV to Gamma-rays: Development and Applications, editado por Carmen S. Menoni e Jaroslav Nejdl. SPIE, 2023. http://dx.doi.org/10.1117/12.2665519.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "In solidum"

1

Murray, R. W. Solid state voltammetry and sensors in solids and gases. Office of Scientific and Technical Information (OSTI), abril de 1992. http://dx.doi.org/10.2172/5830050.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Murray, R. (Solid state voltammetry and sensors in solids and gases). Office of Scientific and Technical Information (OSTI), janeiro de 1989. http://dx.doi.org/10.2172/5315509.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Cooke, Gary A. Solid Phase Characterization of Solids Recovered from Failed Sluicer Arm. Office of Scientific and Technical Information (OSTI), março de 2015. http://dx.doi.org/10.2172/1172386.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Cooke, Gary A., John A. Pestovich e Heinz J. Huber. Solid Phase Characterization of Tank 241-C-108 Residual Waste Solids Samples. Office of Scientific and Technical Information (OSTI), maio de 2013. http://dx.doi.org/10.2172/1081306.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Crouch, Rebecca, Jared Smith, Bobbi Stromer, Christian Hubley, Samuel Beal, Guilherme Lotufo, Afrachanna Butler et al. Methods for simultaneous determination of legacy and insensitive munition (IM) constituents in aqueous, soil/sediment, and tissue matrices. Engineer Research and Development Center (U.S.), agosto de 2021. http://dx.doi.org/10.21079/11681/41720.

Texto completo da fonte
Resumo:
Currently, no standard method exists for analyzing insensitive munition (IM) compounds in environmental matrices, with or without concurrent legacy munition compounds, resulting in potentially inaccurate determinations. The primary objective of this work was to develop new methods of extraction, pre-concentration, and analytical separation/quantitation of 17 legacy munition compounds along with several additional IM compounds, IM breakdown products, and other munition compounds that are not currently included in U.S. Environmental Protection Agency (EPA) Method 8330B. Analytical methods were developed to enable sensitive, simultaneous detection and quantitation of the 24 IM and legacy compounds, including two orthogonal high-performance liquid chromatography (HPLC) column separations with either ultraviolet (UV) or mass spectrometric (MS) detection. Procedures were developed for simultaneous extraction of all 24 analytes and two surrogates (1,2-dinitrobenzene, 1,2-DNB; o-NBA) from high- and low-level aqueous matrices and solid matrices, using acidification, solid phase extraction (SPE), or solvent extraction (SE), respectively. The majority of compounds were recovered from four tissue types within current limits for solids, with generally low recovery only for Tetryl (from 4 to 62%). A preparatory chromatographic interference removal procedure was adapted for tissue extracts, as various analytical interferences were observed for all studied tissue types.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Murray, R. W. Solid state voltammetry and sensors in solids and gases. Performance report, April 1991--March 1992. Office of Scientific and Technical Information (OSTI), abril de 1992. http://dx.doi.org/10.2172/10121500.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Cho, Herman M. Preliminary Feasibility Study of Using Solid-State Nuclear Magnetic Resonance Spectroscopy to Characterize Hanford Tank Waste Solids. Office of Scientific and Technical Information (OSTI), outubro de 2001. http://dx.doi.org/10.2172/789275.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Cho, Herman M., e Gregg J. Lumetta. Preliminary Feasibility Study of Using Solid-State Nuclear Magnetic Resonance Spectroscopy to Characterize Hanford Tank Waste Solids. Office of Scientific and Technical Information (OSTI), outubro de 2001. http://dx.doi.org/10.2172/15001299.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

DR. PAUL WYNBLATT. ENERGETICS OF SOLID/SOLID AND LIQUID/SOLID INTERFACES. Office of Scientific and Technical Information (OSTI), outubro de 2004. http://dx.doi.org/10.2172/833421.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Troch, Serge-Henri, Amarilis Netwall, Alfredo Rihm e Peter Cohen. Emerging Issues in Solid Waste Management in Argentina. Inter-American Development Bank, junho de 2014. http://dx.doi.org/10.18235/0006995.

Texto completo da fonte
Resumo:
This discussion paper has the following objectives: 1) Review and discuss the Bank's programmatic approach to operations in solid waste management (and in other similar operations) and the impacts that approach has on environmental, social and health, and safety (ESHS) aspects. 2) Highlight and discuss the need to strengthen capacity in ESHS aspects of solid waste management among local agencies in light of the Bank's programmatic approach. 3) Summarize the current situation in the solid waste sector, as well as the ESHS aspects of solid waste management, and provide insights in the context of Argentina. 4) Provide recommendations to improve ESHS aspects in solid waste management.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "In solidum":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia