Literatura científica selecionada sobre o tema "Hydrates transfer Cell"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Hydrates transfer Cell".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Hydrates transfer Cell"
Herbst-Gervasoni, Corey J., Michael R. Gau, Michael J. Zdilla e Ann M. Valentine. "Crystal structures of sodium-, lithium-, and ammonium 4,5-dihydroxybenzene-1,3-disulfonate (tiron) hydrates". Acta Crystallographica Section E Crystallographic Communications 74, n.º 7 (8 de junho de 2018): 918–25. http://dx.doi.org/10.1107/s2056989018008009.
Texto completo da fonteSmith, Graham, e Urs D. Wermuth. "Proton-transfer compounds featuring the unusual 4-arsonoanilinium cation from the reaction of (4-aminophenyl)arsonic acid with strong organic acids". Zeitschrift für Kristallographie - Crystalline Materials 233, n.º 2 (23 de fevereiro de 2018): 145–51. http://dx.doi.org/10.1515/zkri-2017-2087.
Texto completo da fonteSun, Hong, Mingfu Yu, Zhijie Li e Saif Almheiri. "A Molecular Dynamic Simulation of Hydrated Proton Transfer in Perfluorosulfonate Ionomer Membranes (Nafion 117)". Journal of Chemistry 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/169680.
Texto completo da fonteFukumoto, Ayako, Toru Sato, Fumio Kiyono e Shinichiro Hirabayashi. "Estimation of the Formation Rate Constant of Methane Hydrate in Porous Media". SPE Journal 19, n.º 02 (17 de abril de 2013): 184–90. http://dx.doi.org/10.2118/163097-pa.
Texto completo da fonteStoporev, Andrey, Rail Kadyrov, Tatyana Adamova, Evgeny Statsenko, Thanh Hung Nguyen, Murtazali Yarakhmedov, Anton Semenov e Andrey Manakov. "Three-Dimensional-Printed Polymeric Cores for Methane Hydrate Enhanced Growth". Polymers 15, n.º 10 (15 de maio de 2023): 2312. http://dx.doi.org/10.3390/polym15102312.
Texto completo da fonteHirota, Yuki, Taiki Tominaga, Takashi Kawabata, Yukinobu Kawakita e Yasumitsu Matsuo. "Differences in Water Dynamics between the Hydrated Chitin and Hydrated Chitosan Determined by Quasi-Elastic Neutron Scattering". Bioengineering 10, n.º 5 (22 de maio de 2023): 622. http://dx.doi.org/10.3390/bioengineering10050622.
Texto completo da fonteGLASHEEN, J. S., e STEVEN C. HAND. "Anhydrobiosis in Embryos of the Brine Shrimp Artemia: Characterization of Metabolic Arrest During Reductions in Cell-Associated Water". Journal of Experimental Biology 135, n.º 1 (1 de março de 1988): 363–80. http://dx.doi.org/10.1242/jeb.135.1.363.
Texto completo da fonteApkarian, Robert P., Stephen Lee e Jason Keiper. "Refining Equipment for High Resolution in-Lens Cryo-Sem". Microscopy and Microanalysis 4, S2 (julho de 1998): 258–59. http://dx.doi.org/10.1017/s1431927600021413.
Texto completo da fonteMcCully, Margaret E., Martin J. Canny, Cheng X. Huang, Celia Miller e Frank Brink. "Cryo-scanning electron microscopy (CSEM) in the advancement of functional plant biology: energy dispersive X-ray microanalysis (CEDX) applications". Functional Plant Biology 37, n.º 11 (2010): 1011. http://dx.doi.org/10.1071/fp10095.
Texto completo da fonteMa, Jianchun, Lifang Wang, Yezhen Zhang e Jianfeng Jia. "Fabrication of a Molybdenum Dioxide/Multi-Walled Carbon Nanotubes Nanocomposite as an Anodic Modification Material for High-Performance Microbial Fuel Cells". Molecules 29, n.º 11 (28 de maio de 2024): 2541. http://dx.doi.org/10.3390/molecules29112541.
Texto completo da fonteTeses / dissertações sobre o assunto "Hydrates transfer Cell"
Abdallah, Mohamad. "Caractérisation multi-échelles des hydrates de gaz formés en présence d'additifs anti-agglomérants". Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0048.
Texto completo da fonteIn the context of oil production, the formation of gas hydrates can lead to the formation of deposits, the clogging of lines and the interruption of oil and/or gas production. Hydrate formation can therefore have a strong economic impact. To ensure production without the risk of production shutdown, different strategies are adopted. A common strategy involves the production outside the hydrate zone by injection of thermodynamic additives (THIs), for example. However, the displacement of hydrate stability conditions by THIs requires the injection of massive doses of additive with high environmental and economic costs. Another production strategy, in the hydrate zone, consists of injecting so-called low dose inhibitors (LDHI): kinetic inhibitors (KHIs) or anti-agglomerant additives (AAs). For deep offshore oil fields, only the injection of AAs is relevant. These additives do not block the formation of hydrates but prevent their agglomeration and disperse the crystals formed in the production fluids. The development of AAs and the validation of their applications on production fields require an in-depth investigation of their impacts on real production systems (dispersion of crystals in pipes, the size of crystals in the continuous phase, the transportability of slurries, etc…).êTo provide a better understanding of the impact of commercial AAs on the formation of hydrates, a multidisciplinary and multi-scale approach was adopted. The formation of natural gas hydrates was first carried out in the laboratory by reproducing oil production conditions with industrial systems under operational conditions with three different AAs. On the macroscopic scale, the slurries of crystals produced under stirring in the reactors highlight effects dependent on the AA used. They impact differently the kinetics of hydrate formation, the rate and speed of crystal growth as well as their state of dispersion. Without stirring, these AAs additives affect the morphology and control the growth of crystals and the phase in which they will grow. A hydrate transfer cell was then designed to sample of hydrate slurries formed in the reactors under conditions close to industrial reality (with stirring, high pressure, low temperature). The transferred hydrate slurries were then analyzed by X-ray microtomography using a method developed during this work. On the microscopic scale, the state of dispersion of the hydrate grains was assessed for all transferred samples and information was obtained on the size of the dispersed hydrate grains, their shape and their sedimentation in the organic phase. At the molecular scale, in-situ analyzes were carried out by Raman spectroscopy on methane hydrates formed in the presence of the three AA additives. These tests highlighted the distribution of hydrates in the organic phases (gas and condensate). Observations by optical microscopy reveal hydrate morphologies comparable to those obtained in the presence of AAs additives in the reactors
Capítulos de livros sobre o assunto "Hydrates transfer Cell"
Fagan, Melinda Bonnie. "Stem cells". In Routledge Encyclopedia of Philosophy. London: Routledge, 2023. http://dx.doi.org/10.4324/9780415249126-q152-1.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Hydrates transfer Cell"
Acharya, Palash V., Arjang Shahriari, Katherine Carpenter e Vaibhav Bahadur. "Aluminum Foam-Based Ultrafast Electronucleation of Hydrates". In ASME 2017 Heat Transfer Summer Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ht2017-4812.
Texto completo da fonteMeindinyo, Remi-Erempagamo T., Runar Bøe, Thor Martin Svartås e Silje Bru. "Experimental Study on the Effect of Gas Hydrate Content on Heat Transfer". In ASME 2015 34th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/omae2015-41280.
Texto completo da fonteWang, Xin, Weizhong Li e Minghao Yu. "Numerical Simulation of Methane Hydrate Dissociation in Glass Micro Channels by Depressurization". In ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/power-icope2017-3447.
Texto completo da fonteFopah Lele, Armand, Fréderic Kuznik, Holger Urs Rammelberg, Thomas Schmidt e Wolfgang K. L. Ruck. "Modeling Approach of Thermal Decomposition of Salt-Hydrates for Heat Storage Systems". In ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17022.
Texto completo da fonteDeepan Kumar, Sadhasivam, Vishnu Ramesh Kumar R, Devadoss Dinesh Kumar, R. Manojkumar, Tamilselvan A, Boopathi M e Lokesh C. "Design and Thermal Analysis of Battery Thermal Management System for EV". In International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0087.
Texto completo da fonteZhao, C. Y., D. Zhou e Z. G. Wu. "Heat Transfer Enhancement of Phase Change Materials (PCMs) in Low and High Temperature Thermal Storage by Using Porous Materials". In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22463.
Texto completo da fonteMukherjee, Partha P., Devesh Ranjan, Rangachary Mukundan e Rodney L. Borup. "Heat and Water Transport in a Polymer Electrolyte Fuel Cell Electrode". In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22703.
Texto completo da fonteBerning, Torsten, e Shiro Tanaka. "A Study of Multiphase Flow and Heat Transfer in Proton Exchange Membrane Fuel Cells With Perforated Metal Gas Diffusion Layers". In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-4654.
Texto completo da fonteFriess, Brooks R., Samuel C. Yew e Mina Hoorfar. "The Effect of Flow Channel Surface Properties and Structures on Water Removal and Fuel Cell Performance". In ASME 2011 9th International Conference on Fuel Cell Science, Engineering and Technology collocated with ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/fuelcell2011-54489.
Texto completo da fonteFriess, Brooks R., Samuel C. Yew e Mina Hoorfar. "Effect of the Hydrophilic Compact Aluminum-Foam Filled Flow Channel on Water Removal From the Cathode Catalyst Layer". In ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2011. http://dx.doi.org/10.1115/icnmm2011-58172.
Texto completo da fonte