Conecte-se

Bibliografias temáticas / Hybrid optics

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Hybrid optics"

Autor: Grafiati

Publicado: 28 de setembro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Hybrid optics".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Hybrid optics"

1

Astrauskytė, Darija, Karolis Galvanauskas, Darius Gailevičius, Mantas Drazdys, Mangirdas Malinauskas e Lina Grineviciute. "Anti-Reflective Coatings Produced via Atomic Layer Deposition for Hybrid Polymer 3D Micro-Optics". Nanomaterials 13, n.º 16 (8 de agosto de 2023): 2281. http://dx.doi.org/10.3390/nano13162281.

Texto completo da fonte

Resumo:

The increasing demand for optics quality requires the lowest optical power loss, which can occur from unwanted reflections. Laser direct writing (LDW) allows for the fabrication of complex structures, which is particularly advantageous in micro-optic applications. This research demonstrates the possibility of forming an anti-reflective coating on hybrid polymer micro-lenses fabricated by employing LDW without changing their geometry. Such coating deposited via atomic layer deposition (ALD) decreased the reflection from 3.3% to 0.1% at a wavelength of 633 nm for one surface of hybrid organic–inorganic SZ2080™ material. This research validates the compatibility of ALD with LDW 3D multiphoton lithography synergistically, expanding its applications on optical grade sub-100 μm scale micro-optics.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Pryakhin, Yu A., e S. O. Mirumyants. "A hybrid integrated-optics interferometer". Journal of Optical Technology 74, n.º 3 (1 de março de 2007): 166. http://dx.doi.org/10.1364/jot.74.000166.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Cánovas, Carmen, Pedro M. Prieto, Silvestre Manzanera, Alejandro Mira e Pablo Artal. "Hybrid adaptive-optics visual simulator". Optics Letters 35, n.º 2 (14 de janeiro de 2010): 196. http://dx.doi.org/10.1364/ol.35.000196.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Smitha, S., P. Shajesh, P. Mukundan e K. G. K. Warrier. "Sol-gel synthesis of biocompatible silica-chitosan hybrids and hydrophobic coatings". Journal of Materials Research 23, n.º 8 (agosto de 2008): 2053–60. http://dx.doi.org/10.1557/jmr.2008.0271.

Texto completo da fonte

Resumo:

A new organic–inorganic hybrid synthesized through a sol-gel process starting from alkoxysilane and chitosan is reported. Functionalization of the hybrid was effected through in situ hydrolysis–condensation reaction of methyltrimethoxysilane (MTMS) and vinyltrimethoxysilane (VTMS) in the reaction medium. The process yields highly transparent and hydrophobic silica–chitosan hybrids. The hybrid gel was investigated with respect to chemical modification, thermal degradation, hydrophobicity, and transparency under the ultraviolet-visible region. The extent of hydrophobicity had been tailored by varying the precursor ratio. SiO2–chitosan–MTMS hybrids showed a higher thermal stability than SiO2–chitosan–VTMS (SCV) hybrids with respect to hydrophobicity. Condensation of silsesquioxanes generated from the hydrolysis of MTMS and VTMS over the silica-chitosan particles impart hydrophobicity to the hybrid. The coatings of functionalized SiO2–chitosan precursor sol on glass substrates showed nearly 100% optical transmittance in the visible region. The present hybrid material may find application in optics and other industries.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Palstra, Isabelle M., Hugo M. Doeleman e A. Femius Koenderink. "Hybrid cavity-antenna systems for quantum optics outside the cryostat?" Nanophotonics 8, n.º 9 (16 de maio de 2019): 1513–31. http://dx.doi.org/10.1515/nanoph-2019-0062.

Texto completo da fonte

Resumo:

AbstractHybrid cavity-antenna systems have been proposed to combine the sub-wavelength light confinement of plasmonic antennas with microcavity quality factors Q. Here, we examine what confinement and Q can be reached in these hybrid systems, and we address their merits for various applications in classical and quantum optics. Specifically, we investigate their applicability for quantum-optical applications at noncryogenic temperatures. To this end we first derive design rules for hybrid resonances from a simple analytical model. These rules are benchmarked against full-wave simulations of hybrids composed of state-of-the-art nanobeam cavities and plasmonic-dimer gap antennas. We find that hybrids can outperform the plasmonic and cavity constituents in terms of Purcell factor, and additionally offer freedom to reach any Q at a similar Purcell factor. We discuss how these metrics are highly advantageous for a high Purcell factor, yet weak-coupling applications, such as bright sources of indistinguishable single photons. The challenges for room-temperature strong coupling, however, are far more daunting: the extremely high dephasing of emitters implies that little benefit can be achieved from trading confinement against a higher Q, as done in hybrids. An attractive alternative could be strong coupling at liquid nitrogen temperature, where emitter dephasing is lower and this trade-off can alleviate the stringent fabrication demands required for antenna strong coupling. For few-emitter strong-coupling, high-speed and low-power coherent or incoherent light sources, particle sensing and vibrational spectroscopy, hybrids provide the unique benefit of very high local optical density of states, tight plasmonic confinement, yet microcavity Q.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Kang, Wenjun, Zhihan Hong e Rongguang Liang. "3D printing optics with hybrid material". Applied Optics 60, n.º 7 (22 de fevereiro de 2021): 1809. http://dx.doi.org/10.1364/ao.414406.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

ZHAI Shu-qin, 翟淑琴, 张姚 ZHANG Yao, 杨荣国 YANG Rong-guo e 刘奎 LIU Kui. "Multiplex Hybrid Entanglement with Linear Optics". Acta Sinica Quantum Optica 23, n.º 2 (2017): 129–35. http://dx.doi.org/10.3788/jqo20172302.0005.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Riedel, K. S. "Geometric optics at lower hybrid frequencies". Physics of Fluids 29, n.º 11 (1986): 3643. http://dx.doi.org/10.1063/1.865795.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Lebeau, Benedicte, e Plinio Innocenzi. "Hybrid materials for optics and photonics". Chemical Society Reviews 40, n.º 2 (2011): 886. http://dx.doi.org/10.1039/c0cs00106f.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Li, Yongjun, Derong Xu, Victor Smaluk e Robert Rainer. "Nonlinear optics from hybrid dispersive orbits". Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 1060 (março de 2024): 169032. http://dx.doi.org/10.1016/j.nima.2023.169032.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Hybrid optics"

1

Chen, Li. "Hybrid Silicon and Lithium Niobate Integrated Photonics". The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429660021.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Elancheliyan, Rajam. "Directed Assembly of Hybrid Colloids for Optics". Thesis, Bordeaux, 2020. http://www.theses.fr/2020BORD0139.

Texto completo da fonte

Resumo:

Cette thèse est dédiée à la recherche d'une nouvelle voie de fabrication de métasurfaces optiques en utilisant des approches «bottom-up» basées sur la chimie en milieu liquide et l'auto-assemblage.Dans ce projet, nous utilisons une voie de formulation à base d'émulsion pour synthétiser des agrégats de nanoparticules d'or. La voie de formulation consiste à émulsionner une suspension de nanoparticules d'or dans l'eau en phase huileuse à l'aide de tensioactifs adaptés. Cette étape est suivie par l'évaporation contrôlée de l'eau des gouttelettes sous basse pression pour confiner les nanoparticules dans les amas finaux. La surface des nanoparticules d'or a été préalablement fonctionnalisée afin de conserver leurs propriétés de résonance plasmonique de surface dans l'assemblage final. La structure des agrégats, et plus précisément leur fraction volumique interne en or f, est contrôlée en faisant varier la masse molaire et la densité de surface du polymère de greffage. La structure finale des agrégats est étudiée en utilisant la diffusion des rayons X aux petits angles (SAXS), la microscopie électronique en transmission (MET) et la cryo-microscopie électronique en transmission (cryo-TEM).Les propriétés de diffusion optique des clusters synthétisés sont étudiées en utilisant une configuration de diffusion statique de la lumière (SLS) résolue en polarisation et à angle variable. Les données mesurées sont analysées et comparées à des calculs théoriques et des simulations. L'influence de la taille R et de la fraction volumique f des clusters sur leurs propriétés de diffusion est mise en évidence expérimentalement. La présence de multipôles électriques et magnétiques et leurs contributions aux propriétés de diffusion des agrégats sont démontrées expérimentalement. Les résultats expérimentaux sont en bon accord avec les simulations qui indiquent que les amas de rayon R = 120 nm et de fraction volumique f supérieure à 0,3 présentent des propriétés de diffusion directionnelle exceptionnelles telles que celles attendues pour des diffuseurs de Huygens utilisés pour la fabrication de métasurfaces
This thesis is dedicated to finding a new route towards the realization of optical metasurfaces using “bottom-up” approaches based on wet chemistry and self-assembly.In this project, we use an emulsion-based formulation route to synthesize clusters of gold nanoparticles. The formulation route involves emulsifying a suspension of gold nanoparticles in water into an oil phase using adapted surfactants. This step is followed by the controlled evaporation of the water from the droplets under low pressure to confine the nanoparticles in the final clusters. The surface of the gold nanoparticles were previously functionalized in order to retain their surface plasmon resonance properties in the final assembly. The structure of the clusters, precisely their internal gold volume fraction f, is controlled by varying the molar mass and surface density of the grafting polymer. The final structure of the clusters isstudied using small angle x-ray scattering (SAXS), transmission electron microscopy (TEM) and cryogenic transmission electron microscopy (cryo-TEM).The optical scattering properties of the synthesized clusters are studied using a variable angle polarization resolved static light scattering (SLS) setup. The data measured using this setup are analyzed and also compared to theoretical calculations and simulations. The influence of the size R and the volume fraction f of the clusters on their scattering properties is experimentally evidenced using the SLS setup. The presence of electric and magnetic multipoles and their contributions to the scattering properties are experimentally demonstrated. The experimental results are in good agreement with the simulations which indicate that clusters with radius R = 120 nm and volume fraction f higher than 0.3 exhibit exceptional directional scattering properties as expected for Huygens scatterers used for the fabrication of metasurfaces

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Li, Duanhui. "Micro optics for micro hybrid concentrator photovoltaics". Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/123563.

Texto completo da fonte

Resumo:

This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.
Thesis: Ph. D., Massachusetts Institute of Technology, Department of Materials Science and Engineering, 2019
Cataloged from student-submitted PDF version of thesis.
Includes bibliographical references (pages 113-124).
Concentrating photovoltaics (CPV) systems use concentrating optical elements to significantly reduce the material and processing costs of multi-junction high efficiency solar cells and improve the conversion efficiency. However, several issues hindered the development of CPV technologies due to the fundamental limit of thermodynamics and practical difficulties of manufacturing and deployment, such as system bulkiness, tight tracking error, thermal management and inability to collect diffuse irradiance. By dramatically scaling down the dimensions of the cells to the level of hundreds of microns and accordingly the concentrating optics, micro hybrid CPV overcomes the listed issues and also delivers a small form factor module prole similar to conventional at panel PV. In this thesis, we are focusing on the critical optical components in the micro hybrid CPV: the micro optics. First, we demonstrated a wafel-level micro hybrid CPV module based on Si fabrication.
By introducing the micro cavities in Si wafer with wet etching, this novel micro optical element illustrates its potential for cost-eective collection of both direct and diffuse sunlight, thereby extending the geographic and market domains for cost-eective PV system deployment. By improving the CPV figure of merit by 46%, our micro hybrid CPV module demonstrated state-of-the-art small-form-factor CPV module optical performance. Next, we focused on developing a micro-prism-array based low-prole spectrum splitting optics assembly. By novelly combining conjugate optics design with materials optical properties, the high-efficiency, low-cost, and low-prole optics potentially enables significant improvement on solar module performance and reduction of energy production costs. Lastly, we developed a simulation frame work to generate annualized diffuse radiance energy distribution map that covers the whole United States region.
This simulation approach accounts for different geographic locations and weather conditions and aims to provide high accuracy reference for diffuse concentrator design.
by Duanhui Li.
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Materials Science and Engineering

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Dibos, Alan. "Nanofabrication of Hybrid Optoelectronic Devices". Thesis, Harvard University, 2015. http://nrs.harvard.edu/urn-3:HUL.InstRepos:17463975.

Texto completo da fonte

Resumo:

The material requirements for optoelectronic devices can vary dramatically depending on the application. Often disparate material systems need to be combined to allow for full device functionality. At the nanometer scale, this can often be challenging because of the inherent chemical and structural incompatibilities of nanofabrication. This dissertation concerns the integration of seemingly dissimilar materials into hybrid optoelectronic devices for photovoltaic, plasmonic, and photonic applications. First, we show that combining a single strip of conjugated polymer and inorganic nanowire can yield a nanoscale solar cell, and modeling of optical absorption and exciton diffusion in this device can provide insight into the efficiency of charge separation. Second, we use an on-chip nanowire light emitting diode to pump a colloidal quantum dot coupled to a silver waveguide. The resulting device is an electro-optic single plasmon source. Finally, we transfer diamond waveguides onto near-field avalanche photodiodes fabricated from GaAs. Embedded in the diamond waveguides are nitrogen vacancy color centers, and the mapping of emission from these single-photon sources is demonstrated using our on-chip detectors, eliminating the need for external photodetectors on an optical table. These studies show the promise of hybrid optoelectronic devices at the nanoscale with applications in alternative energy, optical communication, and quantum optics.
Engineering and Applied Sciences - Applied Physics

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Diaz, Fernando Javier. "On Hybrid Plasmonic Waveguides for Integrated Nonlinear Optics". Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/20282.

Texto completo da fonte

Resumo:

The promise of plasmonics to compress light into sub-wavelength regions holds a potential pathway for nanoscale nonlinear optical devices. However an inherent trade-o? between light con?nement and propagation loss presently limits its use. A new type of plasmonic structure, which combines the best attributes of dielectric and plasmonic waveguides, has been proposed. Recent theoretical studies of these hybrid plasmonic waveguides, along with some experimental results, indicate that these structures can maintain a high ?eld con?nement while reducing propagation loss to moderate levels. Hence, this new structure obtains the best of both platforms and may be key to producing e?cient all optical nonlinear devices. If compact optical data processing is to be achieved via hybrid plasmonic structures, it is necessary to investigate their nonlinear properties and compare them to alternative platforms. Although simulations and theoretical work on hybrid modes for a large range of geometries and structures have been publish, there has been little experimental work investigating its nonlinear properties.In this thesis the candidate experimentally investigates the nonlinear properties of a hybrid plasmonic structure. The proposed structure is based on a silicon nanowire, which allows the use of a bare silicon waveguide as a control sample. The structure geometry is varied slightly in order to measure its e?ect on the nonlinearity, positive results in this regards would indicate that there is room for structure optimization. In order to achieve the experimental results a sensitive method for measuring small nonlinear phase shifts was developed and employed. This method enables the candidate to measure the nonlinear phase shift produced by waveguides of tens of micrometer in length. Further theoretical investigation is carried out regarding the platforms nonlinear properties, such as the physical origin of their strong nonlinear parameter and the limits to their optimization. The work in this thesis adds to the body of knowledge regarding the nonlinear properties for hybrid plasmonic structures from both an experimental and theoretical stand point.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Buller, Steven Harris. "PHOTOREFRACTIVE THIN FILMS AND POLYMERS FOR USE IN ORGANIC-INORGANIC HYBRID CELLS". Wright State University / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=wright1333207525.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Lu, Dong. "Hybrid organic-inorganic sol-gel materials and components for integrated optoelectronics". Diss., The University of Arizona, 2004. http://hdl.handle.net/10150/280624.

Texto completo da fonte

Resumo:

On the technical platform of hybrid organic-inorganic sol-gel, the integrated optoelectronics in the forms of heterogeneous integration between the hybrid sol-gel waveguide and the high refractive index semiconductors and the nonlinear functional doping of disperse red chromophore into hybrid sol-gel is developed. The structure of hybrid sol-gel waveguide on high index semiconductor substrate is designed with BPM-CAD software. A hybrid sol-gel based on MAPTMS and TEOS suitable for lower cladding for the waveguide is developed. The multi-layer hybrid sol-gel waveguide with good mode confinement and low polarization dependence is fabricated on Si and InP. As proof of concept, a 1 x 12 beam splitter based on multimode interference is fabricated on silicon substrate. The device shows excess loss below 0.65 dB and imbalance below 0.28 dB for both TE and TM polarization. A nonlinear active hybrid sol-gel doped with disperse red 13 has been developed by simple co-solvent method. It permits high loading concentration and has low optical loss at 1550 nm. The second-order nonlinear property of the active sol-gel is induced with corona poling and studied with second harmonic generation. A 3-fold of enhancement in the poling efficiency is achieved by blue light assisted corona poling. The chromophore alignment stability is improved by reducing the free volume of the formed inorganic network from the sol-gel condensation reaction. An active sol-gel channel waveguide has been fabricated using active and passive hybrid sol-gel materials by only photopatterning and spin-coating. An amplitude modulator based on the active sol-gel containing 30 wt.% of DR13 shows an electro-optic coefficient of 14 pm/V at 1550 nm and stable operation within the observation time of 24 days.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Schalch, Jacob. "Hybrid Terahertz Metamaterials| From Perfect Absorption to Superconducting Plasmonics". Thesis, University of California, San Diego, 2019. http://pqdtopen.proquest.com/#viewpdf?dispub=10980156.

Texto completo da fonte

Resumo:

Metamaterials operating at terahertz (THz) region of the electromagnetic spectrum have remained have remained a promising area of study not only for realizing technologies in a historically underdeveloped spectral regime, but also as a scientific tool for exploring and controlling fundamental physical phenomena at meV energy scales in a variety of condensed matter systems. In this thesis, I will present several projects in which metamaterials and more traditional condensed matter systems are integrated into hybrid metamaterial systems. We leverage these systems to realize new practical THz devices, as well as to couple to and control quantum phenomena in condensed matter systems. I will begin with an introduction to the conceptual, numerical, and experimental techniques in the THz metamaterial toolbox. The first research endeavor I will discuss is a metamaterial system that incorporates perhaps the simplest material; air. This metamaterial perfect absorber with a continuously tunable air dielectric layer allows for comprehensive exploration of metamaterial absorber systems, and demonstrates some unique phenomena owing to its lossless dielectric layer. Next I will introduce an applications oriented device; an electrically actuated broadband terahertz switch which transitions from a non-reflective, transmissive state to a fully absorptive state. It employs an all dielectric metamaterial layer to suppress reflections and trap light, and an electrically actuated phase change material, VO₂ to transition between states. The final section of this dissertation will explore strong coupling effects between a metamaterial and the superconducting c-axis Josephson plasmon in the layered cuprate, La_2–xSr_xCuO₄. Preliminary measurements are first presented then followed by high field THz measurements in which complex nonlinear behavior is observed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

West, Lamar. "Analysis and simulation of reverse path laser clipping in subcarrier multiplexed hybrid fiber coax networks". Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/13301.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Mishechkin, Oleg. "Integrated optical components using hybrid organic-inorganic materials prepared by sol-gel technology". Diss., The University of Arizona, 2003. http://hdl.handle.net/10150/280437.

Texto completo da fonte

Resumo:

A technological platform based on low-temperature hybrid sol-gel method for fabrication of optical waveguides and integrated optical components has been developed. The developed chemistry for doping incorporation in the host network provides a range of refractive indexes (1.444-1.51) critical for device optimization. A passivation method for improving long-term stability of organic-inorganic sol-gel material is reported. The degradation of waveguide loss over time due to moisture adsorption from the atmosphere is drastically suppressed by coating the material with a protective thin SiO2 film. The results indicate a long-term optical loss below 0.3 dB/cm for protected waveguides. The theory of multimode interference couplers employing self-imaging effect is described. A novel approach for design of high-performance MMI devices in low-contrast material is proposed. The design method is based on optimization of refractive index contrast and width of a multimode waveguide (the body of MMI couplers) to achieve a maximum number of constructively interfering modes resulting to the best self-imaging. This optimization is carried out using 3D BPM simulations. This method was applied to design 1 x 4, 1 x 12, and 4 x 4 MMI couplers and led to a superior performance in excess loss, power imbalance in output ports, and polarization sensitivity. Taking advantage of the inherent input-output phase relations in a 4 x 4 MMI coupler, an optical 90° hybrid is realized by incorporation a Y-junction to coherently excite two ports of the coupler. A series of MMI couplers were fabricated and characterized. The experimental results are in good agreement with the design. Measured performance of the sol-gel derived MMI components was compared to analogues fabricated by other technologies. The comparison demonstrates the superior performance of the sol-gel devices. The polarization sensitivity of all fabricated couplers is below 0.05 dB.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Hybrid optics"

1

Czichy, Reinhard H. Hybrid optics for space applications. Noordwijk, The Netherlands: ESA Publications Division, ESTEC, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

United States. National Aeronautics and Space Administration., ed. Optimizing a continuously variable filter in a hybrid optical correlator. [Washington, DC: National Aeronautics and Space Administration, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Sum, Lai Wai, Jewell Sam T e Society of Photo-optical Instrumentation Engineers., eds. Hybrid fiber-coax systems: 23-24 October, 1995, Philadelphia, Pennsylvania. Bellingham, Wash: SPIE, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Conference on Optical/Hybrid Access Networks (5th 1993 Montréal, Québéc). Conference proceedings: 5th Conference on Optical/Hybrid Access Networks : September 7-9, 1993, Montréal, Canada. Piscataway, N.J: IEEE Service Center, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Borisovich, Gurevich Simon, Batchevsky Roman S, Muravsky Leonid I, Society of Photo-optical Instrumentation Engineers. Ukraine Chapter., Fizyko-mekhanichnyĭ instytut im H.V. Karpenka. e International Center for Scientific Culture. World Laboratory. Western Center of the Ukrainian Branch., eds. Current Ukrainian research in optics and photonics: Optoelectronic and hybrid optical/digital systems for image processing. Bellingham, Wash: SPIE--the International Society for Optical Engineering, 1997.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Gary, Rosen I., Langley Research Center e Institute for Computer Applications in Science and Engineering, eds. A Galerkin method for the estimation of parameters in hybrid systems governing the vibration of flexible beams with TIP bodies. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Center, Ames Research, ed. Design of a flexure mount for optics in dynamic and cryogenic environments. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Center, Ames Research, ed. Design of a flexure mount for optics in dynamic and cryogenic environments. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

LEOS Summer Topical Meetings (1993 Santa Barbara, Calif.). LEOS 1993, Summer Topical Meeting Digest on Optical Microwave Interactions, July 19-21, 1993: Visible Semiconductor Lasers, July 21-22, 1993 ; Impact of Fiber Nonlinearities on Lightwave Systems, July 26-27, 1993 ; Hybrid Optoelectronic Integration and Packaging, July 26-28, 1993 ; Gigabit Networks, July 28-30, 1993, Red Lion Inn, Santa Barbara, California. New York: Institute of Electronics and Electrical Engineers, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Chilton, J. E. Hybrid fiber-optic-electrochemical carbon monoxide monitor. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Hybrid optics"

1

Lau, John H. "Co-packaged Optics". In Flip Chip, Hybrid Bonding, Fan-In, and Fan-Out Technology, 471–93. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-2140-5_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Andrews, L. C., R. L. Phillips, Z. C. Bagley, N. D. Plasson e L. B. Stotts. "Hybrid Optical/Radio Frequency (RF) Communications". In Advanced Free Space Optics (FSO), 295–342. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0918-6_9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Communal, J. E. P. C., G. Largounez, A. B. Grudinin, M. In Het Panhuis e W. J. Blau. "Hybrid Soliton Fibre Laser Characterisation". In Nonlinear Optics for the Information Society, 99–103. Dordrecht: Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-015-1267-1_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Carlos, L. D., e R. A. Sá Ferreira. "Organic–Inorganic Hybrids for Light-Emitting Devices and Integrated Optics". In Hybrid Nanocomposites for Nanotechnology, 509–86. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-30428-1_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Diaz, F., F. Goudail, B. Loiseaux e J. P. Huignard. "Hybrid Imaging Systems for Depth of Focus Extension With or Without Postprocessing". In Information Optics and Photonics, 235–46. New York, NY: Springer New York, 2010. http://dx.doi.org/10.1007/978-1-4419-7380-1_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Liu, Jinyuan, Zhenming Ding e Ziyang Zhang. "Polymer-Ge Hybrid Waveguide for Flexible Photonic Integration". In The 25th European Conference on Integrated Optics, 500–505. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63378-2_81.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Vogelgesang, Ralf, Wei Wang, Parinda Vasa, Robert Pomraenke, Ephraim Sommer, Antonietta De Sio e Christoph Lienau. "Interplay Between Strong Coupling and Radiative Damping in Hybrid Excitonic-Plasmonic Nanostructures". In Progress in Nonlinear Nano-Optics, 119–36. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-12217-5_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Marchant, Daniel, Imad Faruque e Jorge Barreto. "Generating Photon Pairs in a Hybrid Si-BTO Platform". In The 25th European Conference on Integrated Optics, 349–52. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63378-2_57.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Kresse, Martin, Moritz Kleinert, David de Felipe, Tianwen Qian, Philipp Winklhofer, Madeleine Weigel, Klara Mihov et al. "Wavelength Tunable, Polymer-Based Arrayed Waveguide Gratings for Hybrid Integration". In The 25th European Conference on Integrated Optics, 111–17. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63378-2_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Yamaguchi, Masahiro. "Optics and Computational Methods for Hybrid Resolution Spectral Imaging". In Lecture Notes in Computer Science, 23–32. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15979-9_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Hybrid optics"

1

Neff, John A. "Optics And Symbolic Computing". In Optical and Hybrid Computing, editado por Harold H. Szu. SPIE, 1986. http://dx.doi.org/10.1117/12.963999.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Szu, Harold. "Nonlinear Signal Processing Using Fiber-Optics Neurograms". In Optical and Hybrid Computing, editado por Harold H. Szu. SPIE, 1986. http://dx.doi.org/10.1117/12.964008.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Sveda, Libor, Veronika Semencova, Adolf Inneman, Ladislav Pina e Rene Hudec. "Hybrid lobster optic". In Optics & Photonics 2005, editado por George A. Kyrala, Jean-Claude J. Gauthier, Carolyn A. MacDonald e Ali M. Khounsary. SPIE, 2005. http://dx.doi.org/10.1117/12.620247.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Dallesasse, J. M., B. Kesler, T. O’Brien, G. L. Su e J. Carlson. "Hybrid Photonic Integration". In Frontiers in Optics. Washington, D.C.: OSA, 2015. http://dx.doi.org/10.1364/fio.2015.fth4b.2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Herzig, H. P., Ph Nussbaum, A. Schilling, S. Traut, I. Philipoussis, C. Ossmann, R. Völkel, M. Rossi e H. Schift. "Different concepts for the fabrication of hybrid (refractive/diffractive) elements". In Diffractive Optics and Micro-Optics. Washington, D.C.: Optica Publishing Group, 1998. http://dx.doi.org/10.1364/domo.1998.dthc.2.

Texto completo da fonte

Resumo:

Various fabrication methods have been investigated to manufacture refractive and diffractive micro-optical elements [1]. The structure of the elements is generated by holographic recording, optical lithography and direct writing (e-beam, laser beam). The pattern is then transferred into quartz by reactive ion etching (RIE), or replicated into plastic for low-cost mass production. Of special interest is the fabrication of hybrid elements, which combine the unique properties of diffractive optics (fan-out, high dispersion) with those of refractive optics (high numerical aperture, low dispersion). Therefore, we have studied different concepts for the manufacturing of hybrid (refractive/diffractive) elements and we present here some first results.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Kostuk, Raymond K., James M. Battiato, Charles W. Haggans e Gene Campbell. "Hybrid Diffractive Elements for Planar Optics". In Optical Design for Photonics. Washington, D.C.: Optica Publishing Group, 1993. http://dx.doi.org/10.1364/odp.1993.tua.1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Wood, A. P., P. J. Rogers, P. B. Conway e P. A. Manning. "Hybrid optics in dual waveband infrared systems". In Diffractive Optics and Micro-Optics. Washington, D.C.: Optica Publishing Group, 1998. http://dx.doi.org/10.1364/domo.1998.jthb.4.

Texto completo da fonte

Resumo:

Diffractive optics in the form of hybrid elements manufactured by single point diamond turning are now well-established and widely used in both mid-wave and long-wave infrared optical systems. The fundamental advantages, based on the reduced element-count, can have a significant impact on cost, mass and overall complexity

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Nikolov, Ivan D., e Christo D. Ivanov. "Hybrid plastic-glass optical systems". In OPTIKA '98: Fifth Congress on Modern Optics, editado por Gyorgy Akos, Gabor Lupkovics e Andras Podmaniczky. SPIE, 1998. http://dx.doi.org/10.1117/12.324553.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Furusawa, Akira. "Hybrid Quantum Information Processing". In Frontiers in Optics. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/fio.2016.ftu3g.2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Bussières, Felix, Allison Rubenok, Nicolas Godbout e Wolfgang Tittel. "Towards Photonic Hybrid Entanglement". In Frontiers in Optics. Washington, D.C.: OSA, 2007. http://dx.doi.org/10.1364/fio.2007.ftui5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Hybrid optics"

1

Li, Yongjun. Nonlinear optics from hybrid dispersive orbits. Office of Scientific and Technical Information (OSTI), dezembro de 2023. http://dx.doi.org/10.2172/2281962.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Ratowsky, R. P., J. S. Kallman, B. B. Afeyan e M. D. Feit. Hybrid Ray/Wave Optics for Laser-Plasma Interaction. Office of Scientific and Technical Information (OSTI), fevereiro de 1999. http://dx.doi.org/10.2172/792778.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Green, D. Electron optics in hybrid photodetectors in magnetic fields. Office of Scientific and Technical Information (OSTI), dezembro de 1996. http://dx.doi.org/10.2172/434315.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Dowski, Edward R., e Jr. Hybrid Optical/Digital Imaging for Automatic Inspection. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2000. http://dx.doi.org/10.21236/ada384516.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

A. Ronzhin, D. Green, J. Freeman e P. de Barbaro. Measurement of the hybrid photodiode response - Fiber optic window. Office of Scientific and Technical Information (OSTI), janeiro de 1999. http://dx.doi.org/10.2172/2878.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Muelaner, Jody. Unsettled Issues Regarding Power Options for Decarbonized Commercial Vehicles. SAE International, setembro de 2021. http://dx.doi.org/10.4271/epr2021021.

Texto completo da fonte

Resumo:

While direct electrification appears to provide the most cost-effective route to decarbonization of commercial vehicles, uptake may be constrained by critical metal supply. Additionally, it will be many years before hydrogen power becomes decarbonized or if it can ever compete economically with direct electrification. An electric road system (ERS) could offer a highly efficient and cost-effective route to direct electrification that would greatly reduce the volume of batteries required, but pilot schemes are urgently needed to provide concrete data on operating costs for different ERS technologies. Furthermore, if plug-in hybrid electric vehicles could obtain most of their power from an ERS, liquid biofuels and “electrofuels” may prove useful for occasional off-grid range extension. To achieve extremely long-range for operation in remote locations, liquid fuels remain the only viable option. Unsettled Issues Regarding Power Options for Decarbonized Commercial Vehicles discusses the analysis required to understand the lifecycle energy use for different power options for decarbonized commercial vehicles.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Chiarulli, D. M., R. G. Melhem e S. P. Levitan. Coincident Pulse Techniques for Hybrid Electronic Optical Computer Systems. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1991. http://dx.doi.org/10.21236/ada246774.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Chiarulli, Donald M., Rami G. Melhem e Steven P. Levitan. Coincident Pulse Techniques for Hybrid Electronic Optical Computer Systems. Fort Belvoir, VA: Defense Technical Information Center, agosto de 1992. http://dx.doi.org/10.21236/ada258692.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Goward, W., M. E. Lowry, M. D. Pocha e A. J. Ruggiero. Miniaturization of optical components through hybrid integration and packaging. Office of Scientific and Technical Information (OSTI), fevereiro de 1999. http://dx.doi.org/10.2172/8516.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Lambrecht, Walter R. Magneto-Optical Properties of Hybrid Magnetic Material Semiconductor Nanostructures. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2007. http://dx.doi.org/10.21236/ada472402.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!