Artigos de revistas sobre o tema "High fatigue cycles"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "High fatigue cycles".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Oshida, Yoshiki, e P. C. Chen. "High and Low-Cycle Fatigue Damage Evaluation of Multilayer Thin Film Structure". Journal of Electronic Packaging 113, n.º 1 (1 de março de 1991): 58–62. http://dx.doi.org/10.1115/1.2905367.
Texto completo da fonteHeinz, Stefan, e Dietmar Eifler. "Very High Cycle Fatigue and Damage Behavior of Ti6Al4V". Key Engineering Materials 664 (setembro de 2015): 71–80. http://dx.doi.org/10.4028/www.scientific.net/kem.664.71.
Texto completo da fonteZhang, Wei Chang, Ming Liang Zhu e Fu Zhen Xuan. "Experimental Characterization of Competition of Surface and Internal Damage in Very High Cycle Fatigue Regime". Key Engineering Materials 754 (setembro de 2017): 79–82. http://dx.doi.org/10.4028/www.scientific.net/kem.754.79.
Texto completo da fonteWeibel, Dominic, Frank Balle e Daniel Backe. "Ultrasonic Fatigue of CFRP - Experimental Principle, Damage Analysis and Very High Cycle Fatigue Properties". Key Engineering Materials 742 (julho de 2017): 621–28. http://dx.doi.org/10.4028/www.scientific.net/kem.742.621.
Texto completo da fonteHe, Chao, Yong Jie Liu e Qing Yuan Wang. "Very High Cycle Fatigue Properties of Welded Joints under High Frequency Loading". Advanced Materials Research 647 (janeiro de 2013): 817–21. http://dx.doi.org/10.4028/www.scientific.net/amr.647.817.
Texto completo da fonteShao, Chuang, Claude Bathias, Danièle Wagner e Hua Tao. "Very High Cycle Fatigue Behavior and Thermographic Analysis of High Strength Steel". Advanced Materials Research 118-120 (junho de 2010): 948–51. http://dx.doi.org/10.4028/www.scientific.net/amr.118-120.948.
Texto completo da fonteZhou, Cheng En, Gui An Qian e You Shi Hong. "Fractography and Crack Initiation of Very-High-Cycle Fatigue for a High Carbon Low Alloy Steel". Key Engineering Materials 324-325 (novembro de 2006): 1113–16. http://dx.doi.org/10.4028/www.scientific.net/kem.324-325.1113.
Texto completo da fonteWei, Kang, e Bo Lin He. "Failure Mechanism of Very High Cycle Fatigue for High Strength Steels". Key Engineering Materials 664 (setembro de 2015): 275–81. http://dx.doi.org/10.4028/www.scientific.net/kem.664.275.
Texto completo da fonteDaniel Varecha, Slavomir Hrcek, Otakar Bokuvka, Frantisek Novy, Libor Trsko, Ruzica Nikolic e Michal Jambor. "Fatigue Safety Coefficients for Ultra – High Region of Load Cycles". Communications - Scientific letters of the University of Zilina 22, n.º 4 (1 de outubro de 2020): 97–102. http://dx.doi.org/10.26552/com.c.2020.4.97-102.
Texto completo da fonteWu, Liang Chen, e Dong Po Wang. "Investigation of High Cycle and Low Cycle Fatigue Interaction on Fatigue Behavior of Welded Joints". Applied Mechanics and Materials 217-219 (novembro de 2012): 2101–6. http://dx.doi.org/10.4028/www.scientific.net/amm.217-219.2101.
Texto completo da fonteJin, Ling Ling, Cai Yan Deng, Dong Po Wang e Rui Ying Tian. "Research on Ultra-High Cycle Fatigue Property of 45 Steel". Advanced Materials Research 295-297 (julho de 2011): 1911–14. http://dx.doi.org/10.4028/www.scientific.net/amr.295-297.1911.
Texto completo da fonteBasaldella, Marco, Marvin Jentsch, Nadja Oneschkow, Martin Markert e Ludger Lohaus. "Compressive Fatigue Investigation on High-Strength and Ultra-High-Strength Concrete within the SPP 2020". Materials 15, n.º 11 (26 de maio de 2022): 3793. http://dx.doi.org/10.3390/ma15113793.
Texto completo da fonteIssler, Stephan, Manfred Bacher-Hoechst e Steffen Schmid. "Fatigue Designing of High Strength Steels Components Considering Aggressive Fuel Environment and Very High Cycle Fatigue Effects". Materials Science Forum 783-786 (maio de 2014): 1845–50. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.1845.
Texto completo da fonteZhao, Xiao, Jian Jun Zhao e Yong Jie Liu. "Fatigue Behavior of GH4169 Alloy up to Very High Cycles". Advanced Materials Research 535-537 (junho de 2012): 928–31. http://dx.doi.org/10.4028/www.scientific.net/amr.535-537.928.
Texto completo da fonteBokůvka, Otakar, Michal Jambor, Slavomír Hrček, Ján Šteininger e Libor Trško. "Design of Shaft Respecting the Fatigue Limit for Ultra-High Number of Cycles". Periodica Polytechnica Transportation Engineering 47, n.º 1 (12 de março de 2018): 6–12. http://dx.doi.org/10.3311/pptr.11562.
Texto completo da fonteZhao, Xiao, e Jian Jun Zhao. "Experimental Study on Ultra-High Cycle Fatigue Property of Q345 Welded Joint". Advanced Materials Research 538-541 (junho de 2012): 1488–91. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.1488.
Texto completo da fonteBratasena, M. E., T. Kato, O. Umezawa, Y. Ono e M. Komatsu. "High-cycle fatigue strength of 22Cr-12Ni austenitic stainless steel at 77 K". IOP Conference Series: Materials Science and Engineering 1302, n.º 1 (1 de maio de 2024): 012001. http://dx.doi.org/10.1088/1757-899x/1302/1/012001.
Texto completo da fonteLi, Tang, Qing Yuan Wang, Q. F. Dou, Chong Wang e M. R. Sriraman. "Investigations on Fatigue Properties of Die Cast Magnesium Alloy AZ91HP at Very High Cycles". Key Engineering Materials 353-358 (setembro de 2007): 235–38. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.235.
Texto completo da fonteWang, Pengfei, Weiqiang Wang, Ming Zhang, Qiwen Zhou e Zengliang Gao. "Effects of Specimen Size and Welded Joints on the Very High Cycle Fatigue Properties of Compressor Blade Steel KMN-I". Coatings 11, n.º 10 (13 de outubro de 2021): 1244. http://dx.doi.org/10.3390/coatings11101244.
Texto completo da fonteCao, X. J., M. R. Sriraman e Qing Yuan Wang. "Fatigue in Ti-6Al-4V at Very High Cycles". Materials Science Forum 561-565 (outubro de 2007): 259–62. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.259.
Texto completo da fonteHuang, Zhi Yong, Wei Wei Du, Danièle Wagner e Claude Bathias. "Relation between the Mechanical Behaviour of a High Strength Steel and the Microstructure in Gigacycle Fatigue". Materials Science Forum 636-637 (janeiro de 2010): 1459–66. http://dx.doi.org/10.4028/www.scientific.net/msf.636-637.1459.
Texto completo da fonteEbara, Ryuichiro. "Grain Size Effect on Low Cycle Fatigue Behavior of High Strength Structural Materials". Solid State Phenomena 258 (dezembro de 2016): 269–72. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.269.
Texto completo da fonteNový, František, Libor Trško, Robert Ulewicz e Sylvia Dundeková. "Influence of Electrodeposited Coatings on Ultra-High-Cycle Fatigue Life of S235 Structural Steel". Materials Science Forum 818 (maio de 2015): 37–40. http://dx.doi.org/10.4028/www.scientific.net/msf.818.37.
Texto completo da fonteChapetti, Mirco D. "Prediction of threshold for very high cycle fatigue (N>107 cycles)". Procedia Engineering 2, n.º 1 (abril de 2010): 257–64. http://dx.doi.org/10.1016/j.proeng.2010.03.028.
Texto completo da fonteSong, Zongxian, Wenbin Gao, Dongpo Wang, Zhisheng Wu, Meifang Yan, Liye Huang e Xueli Zhang. "Very-High-Cycle Fatigue Behavior of Inconel 718 Alloy Fabricated by Selective Laser Melting at Elevated Temperature". Materials 14, n.º 4 (20 de fevereiro de 2021): 1001. http://dx.doi.org/10.3390/ma14041001.
Texto completo da fonteAbdel Wahab, Magd, Irfan Hilmy e Reza Hojjati-Talemi. "On the Use of Low and High Cycle Fatigue Damage Models". Key Engineering Materials 569-570 (julho de 2013): 1029–35. http://dx.doi.org/10.4028/www.scientific.net/kem.569-570.1029.
Texto completo da fonteGeilen, Max Benedikt, Marcus Klein e Matthias Oechsner. "On the Influence of Ultimate Number of Cycles on Lifetime Prediction for Compression Springs Manufactured from VDSiCr Class Spring Wire". Materials 13, n.º 14 (20 de julho de 2020): 3222. http://dx.doi.org/10.3390/ma13143222.
Texto completo da fonteFintová, Stanislava, Libor Trško, Zdeněk Chlup, Filip Pastorek, Daniel Kajánek e Ludvík Kunz. "Fatigue Crack Initiation Change of Cast AZ91 Magnesium Alloy from Low to Very High Cycle Fatigue Region". Materials 14, n.º 21 (20 de outubro de 2021): 6245. http://dx.doi.org/10.3390/ma14216245.
Texto completo da fonteCalabrese, Angelo Savio, Tommaso D’Antino, Pierluigi Colombi e Carlo Poggi. "Low- and High-Cycle Fatigue Behavior of FRCM Composites". Materials 14, n.º 18 (18 de setembro de 2021): 5412. http://dx.doi.org/10.3390/ma14185412.
Texto completo da fonteŠulák, Ivo, Karel Obrtlík e Ladislav Čelko. "High Temperature Low Cycle Fatigue Characteristics of Grit Blasted Polycrystalline Ni-Base Superalloy". Key Engineering Materials 665 (setembro de 2015): 73–76. http://dx.doi.org/10.4028/www.scientific.net/kem.665.73.
Texto completo da fonteYang, Shaopeng, Peifeng Cheng, Fangzhong Hu, Wenchao Yu, Chi Zhang, Kaizhong Wang e Maoqiu Wang. "Very High Cycle Fatigue Properties of 18CrNiMo7-6 Carburized Steel with Gradient Hardness Distribution". Coatings 11, n.º 12 (2 de dezembro de 2021): 1482. http://dx.doi.org/10.3390/coatings11121482.
Texto completo da fonteLabergere, Carl, Khemais Saanouni, Zhi Dan Sun, Mohamed Ali Dhifallah, Yisa Li e Jean Louis Duval. "Prediction of Low Cycle Fatigue Life Using Cycles Jumping Integration Scheme". Applied Mechanics and Materials 784 (agosto de 2015): 308–16. http://dx.doi.org/10.4028/www.scientific.net/amm.784.308.
Texto completo da fonteEbara, Ryuichiro, R. Nohara, Rintaro Ueji, A. Ogura, Y. Ishihara e S. Hamaya. "High Cycle Fatigue Behavior of Cold Forging Die Steel". Key Engineering Materials 417-418 (outubro de 2009): 225–28. http://dx.doi.org/10.4028/www.scientific.net/kem.417-418.225.
Texto completo da fonteChen, Zhi Wu, Zhen Ya Lu, Xu Ming Chen, Ying Zhang e Xuan Cheng. "Effects of Electrical Characters on Electrical Fatigue Behavior in PLZT Ferroelectric Ceramics". Key Engineering Materials 280-283 (fevereiro de 2007): 159–62. http://dx.doi.org/10.4028/www.scientific.net/kem.280-283.159.
Texto completo da fonteLee, Yoonseok, Seungchan Cho, Changwook Ji, Ilguk Jo e Moonhee Choi. "Impact of Morphology on the High Cycle Fatigue Behavior of Ti-6Al-4V for Aerospace". Metals 12, n.º 10 (14 de outubro de 2022): 1722. http://dx.doi.org/10.3390/met12101722.
Texto completo da fonteTang, Wei Wei, Hong Wang e Jin Gan Dai. "Fatigue Behavior of Medium Carbon Steel by Symmetric Bending Ultrasonic Frequency Method". Advanced Materials Research 393-395 (novembro de 2011): 102–5. http://dx.doi.org/10.4028/www.scientific.net/amr.393-395.102.
Texto completo da fontePerez Mora, Ruben, Gonzalo Domínguez Almaraz, Thierry Palin-Luc, Claude Bathias e José Luis Arana. "Very High Cycle Fatigue Analysis of High Strength Steel with Corrosion Pitting". Key Engineering Materials 449 (setembro de 2010): 104–13. http://dx.doi.org/10.4028/www.scientific.net/kem.449.104.
Texto completo da fonteTian, Qing Chao, Xian Ping Dong, Hai Chao Cui e Ke Xu. "Characterization of the Welded-Joint of High-Strength High-Toughness Seamless Steel Pipe under High-Cycle Fatigue Condition". Materials Science Forum 896 (março de 2017): 202–8. http://dx.doi.org/10.4028/www.scientific.net/msf.896.202.
Texto completo da fonteSong, Qingpeng, Jiwang Zhang, Ning Zhang, Wei Li e Liantao Lu. "High cycle fatigue property and fracture behavior of high-strength austempered ductile iron". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231, n.º 4 (11 de agosto de 2015): 423–29. http://dx.doi.org/10.1177/1464420715599800.
Texto completo da fonteZhang, A. L., D. Liu e H. M. Wang. "Thermal Fatigue Crack Initiation of Laser Deposited High-temperature Titanium Alloy Ti60A in 20–700 °C". High Temperature Materials and Processes 32, n.º 4 (16 de agosto de 2013): 331–37. http://dx.doi.org/10.1515/htmp-2012-0141.
Texto completo da fonteZhou, Yan Fen, Stephen Jerrams, Lin Chen e Mark Johnson. "The Determination of Multi-Axial Fatigue in Magnetorheological Elastomers Using Bubble Inflation". Advanced Materials Research 875-877 (fevereiro de 2014): 507–11. http://dx.doi.org/10.4028/www.scientific.net/amr.875-877.507.
Texto completo da fonteScott-Emuakpor, Onome, M. H. Herman Shen, Tommy George, Charles J. Cross e Jeffrey Calcaterra. "Development of an Improved High Cycle Fatigue Criterion". Journal of Engineering for Gas Turbines and Power 129, n.º 1 (1 de março de 2004): 162–69. http://dx.doi.org/10.1115/1.2360599.
Texto completo da fonteXu, D. K., e E. H. Han. "Effect of Yttrium Content on the Ultra-High Cycle Fatigue Behavior of Mg-Zn-Y-Zr Alloys". Materials Science Forum 816 (abril de 2015): 333–36. http://dx.doi.org/10.4028/www.scientific.net/msf.816.333.
Texto completo da fonteKuchariková, Lenka, Eva Tillová, Milan Uhríčik, Juraj Belan e Ivana Švecová. "High-cycles Fatigue of Different Casted Secondary Aluminium Alloy". Manufacturing Technology 17, n.º 5 (1 de outubro de 2017): 756–61. http://dx.doi.org/10.21062/ujep/x.2017/a/1213-2489/mt/17/5/756.
Texto completo da fonteSavin, O., J. Baroth, C. Badina, S. Charbonnier e C. Bérenguer. "Damage due to start-stop cycles of turbine runners under high-cycle fatigue". International Journal of Fatigue 153 (dezembro de 2021): 106458. http://dx.doi.org/10.1016/j.ijfatigue.2021.106458.
Texto completo da fonteShimamura, Yoshinobu, Reo Kasahara, Hitoshi Ishii, Keiichiro Tohgo, Tomoyuki Fujii, Toru Yagasaki e Soichiro Sumida. "Fretting Fatigue Behaviour of Alloy Steel in the Very High Cycle Region". MATEC Web of Conferences 300 (2019): 18002. http://dx.doi.org/10.1051/matecconf/201930018002.
Texto completo da fonteNečemer, Branko, Franc Zupanič, Tomaž Vuherer e Srečko Glodež. "High-Cycle Fatigue Behaviour of the Aluminium Alloy 5083-H111". Materials 16, n.º 7 (28 de março de 2023): 2674. http://dx.doi.org/10.3390/ma16072674.
Texto completo da fonteJambor, Michal, František Nový, Otakar Bokůvka, Libor Trško e Monika Oravcová. "Influence of structure sensitising of the AlSi 316Ti austenitic stainless steel on the ultra-high cycle fatigue properties". MATEC Web of Conferences 157 (2018): 05011. http://dx.doi.org/10.1051/matecconf/201815705011.
Texto completo da fonteAltenberger, I., Ivan Nikitin, P. Juijerm e Berthold Scholtes. "Residual Stress Stability in High Temperature Fatigued Mechanically Surface Treated Metallic Materials". Materials Science Forum 524-525 (setembro de 2006): 57–62. http://dx.doi.org/10.4028/www.scientific.net/msf.524-525.57.
Texto completo da fonteWang, Q. Y., Hong Yan Zhang, S. R. Sriraman e S. L. Liu. "Super Long Life Fatigue of AE42 and AM60 Magnesium Alloys". Key Engineering Materials 306-308 (março de 2006): 181–86. http://dx.doi.org/10.4028/www.scientific.net/kem.306-308.181.
Texto completo da fonte