Artigos de revistas sobre o tema "Hard superalloys"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Hard superalloys".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Kursuncu, Bilal, Halil Caliskan, Sevki Yilmaz Guven e Peter Panjan. "Wear Behavior of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coated Carbide Cutting Tool during Face Milling of Inconel 718 Superalloy". Journal of Nano Research 47 (maio de 2017): 11–16. http://dx.doi.org/10.4028/www.scientific.net/jnanor.47.11.
Texto completo da fontePan, Lei, ZR Wu, Lei Fang e YD Song. "Investigation of surface damage and roughness for nickel-based superalloy GH4169 under hard turning processing". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, n.º 4 (16 de novembro de 2019): 679–91. http://dx.doi.org/10.1177/0954405419885789.
Texto completo da fontePrasad, Ganesha, Raghavendra Kamath C. e Vijay G.S. "A review on conventional and nonconventional machining of Nickel-based Nimonic superalloy". Manufacturing Review 10 (2023): 10. http://dx.doi.org/10.1051/mfreview/2023009.
Texto completo da fonteZahedi, Ali, e J. Akbari. "FEM Analysis of Single Grit Chip Formation in Creep-Feed Grinding of Inconel 718 Superalloy". Advanced Materials Research 325 (agosto de 2011): 128–33. http://dx.doi.org/10.4028/www.scientific.net/amr.325.128.
Texto completo da fonteDíaz-Álvarez, José, Antonio Díaz-Álvarez, Henar Miguélez e José Cantero. "Finishing Turning of Ni Superalloy Haynes 282". Metals 8, n.º 10 (18 de outubro de 2018): 843. http://dx.doi.org/10.3390/met8100843.
Texto completo da fonteMukhtarov, Shamil, Artem Ganeev, Marsel Nagimov, Ruslan Shakhov, Vener Valitov e Farid Utyashev. "Manufacturing of Axisymmetric Components out of Superalloys and Hard-to-Deform Steels by Roll Forming". Key Engineering Materials 746 (julho de 2017): 69–74. http://dx.doi.org/10.4028/www.scientific.net/kem.746.69.
Texto completo da fonteALTIN, Abdullah. "Determination of Cutting Tool Performance Characteristics in Machining Nickel Based Super Alloys". International Conference on Applied Engineering and Natural Sciences 1, n.º 1 (20 de julho de 2023): 416–20. http://dx.doi.org/10.59287/icaens.1031.
Texto completo da fonteJean, Ming-Der, Shu-Yi Tu e Jen-Ting Wang. "Analysis of Hard-Facing Appearance of Specific Powdered Superalloys for PTA-Coating Processes". Journal of Materials Engineering and Performance 14, n.º 3 (1 de junho de 2005): 307–14. http://dx.doi.org/10.1361/10599490523904.
Texto completo da fonteDíaz-Álvarez, Antonio, José Díaz-Álvarez, José Luis Cantero e Henar Miguélez. "Sustainable High-Speed Finishing Turning of Haynes 282 Using Carbide Tools in Dry Conditions". Metals 9, n.º 9 (6 de setembro de 2019): 989. http://dx.doi.org/10.3390/met9090989.
Texto completo da fonteLi, Yuebing, Yanming He, Chuanyang Lu, Wenjian Zheng, Jianguo Yang, Donghong Wang, Limei Wang, Yuan Sun e Zengliang Gao. "Microstructural Evolution and Mechanical Evaluation of a Laser-Induced Composite Coating on a Ni-Based Superalloy during Thermal Exposure". Materials 12, n.º 9 (3 de maio de 2019): 1439. http://dx.doi.org/10.3390/ma12091439.
Texto completo da fontePoloczek, Tomasz, Aleksandra Lont e Jacek Górka. "The Structure and Properties of Laser-Cladded Inconel 625/TiC Composite Coatings". Materials 16, n.º 3 (1 de fevereiro de 2023): 1265. http://dx.doi.org/10.3390/ma16031265.
Texto completo da fonteZheng, Jia, Chuan Tang, Yuanxi Sun, Mingchi Feng e Congzhe Wang. "An Enhanced U-Net Approach for Segmentation of Aeroengine Hollow Turbine Blade". Mathematics 10, n.º 22 (12 de novembro de 2022): 4230. http://dx.doi.org/10.3390/math10224230.
Texto completo da fonteDanzer, Robert, Markus Lengauer, Domagoj Rubeša e Walter Harrer. "Silicon Nitride Tools for Hot Rolling of High-Alloyed Steel and Superalloy Wires". Key Engineering Materials 409 (março de 2009): 43–54. http://dx.doi.org/10.4028/www.scientific.net/kem.409.43.
Texto completo da fonteBeranoagirre, A., e Luis Norberto López de Lacalle. "Optimizing the Turning of Titanium Aluminide Alloys". Advanced Materials Research 498 (abril de 2012): 189–94. http://dx.doi.org/10.4028/www.scientific.net/amr.498.189.
Texto completo da fonteGadalińska, Elżbieta, Andrzej Michałowski e Sławomir Czarnewicz. "Determination of Stress Values in the Surface Layer of Inconel 718 Samples Dedicated to Fatigue Tests". Fatigue of Aircraft Structures 2019, n.º 11 (1 de dezembro de 2019): 78–86. http://dx.doi.org/10.2478/fas-2019-0008.
Texto completo da fonteMemarianpour, Morvarid, Seyed Ali Niknam, Sylvain Turenne e Marek Balazinski. "Initial tool wear behavior in high-speed turning of Inconel 718". Transactions of the Canadian Society for Mechanical Engineering 44, n.º 3 (1 de setembro de 2020): 395–404. http://dx.doi.org/10.1139/tcsme-2019-0110.
Texto completo da fonteChang, Julius C., e Samuel M. Allen. "Elstic energy changes accompanying gamma-prime rafting in nickel-base superalloys". Journal of Materials Research 6, n.º 9 (setembro de 1991): 1843–55. http://dx.doi.org/10.1557/jmr.1991.1843.
Texto completo da fonteYu, Yingyan, Zhiyuan Qu, Jiansheng Zhang e Jie Zhou. "Influence of Surfacing Fe-Based Alloy Layers on Wire Arc Additive Manufactured Ni-Based Superalloys Material on Its Microstructure and Wear Properties". Materials 15, n.º 17 (31 de agosto de 2022): 6020. http://dx.doi.org/10.3390/ma15176020.
Texto completo da fonteAnil, Semih Ekrem, Hasan Demirtas, Adnan Kalayci e Abdulkadir Cebi. "Investigation of the Layer Effects Formed by W-EDM on Electrochemical Grooving of Stellite 21". Machines 11, n.º 8 (10 de agosto de 2023): 823. http://dx.doi.org/10.3390/machines11080823.
Texto completo da fonteTuominen, J., M. Hallaji, J. Kiviö e J. Vihinen. "High-speed laser cladding: new developments for wear and corrosion protection". IOP Conference Series: Materials Science and Engineering 1296, n.º 1 (1 de dezembro de 2023): 012037. http://dx.doi.org/10.1088/1757-899x/1296/1/012037.
Texto completo da fontePickard, Andrew C., e David E. Mills. "Modeling of subsurface ceramic inclusions in metallic matrices". Journal of Strain Analysis for Engineering Design 55, n.º 5-6 (19 de março de 2020): 134–44. http://dx.doi.org/10.1177/0309324720910935.
Texto completo da fonteFedelich, B. "Modelling at the dislocation level the reinforcement of alloys by hard precipitates: The example of Ni-base superalloys". Journal de Physique IV (Proceedings) 105 (março de 2003): 131–38. http://dx.doi.org/10.1051/jp4:20030180.
Texto completo da fonteKwiatkowski, Michał, Krzysztof Zaba, Maciej Nowosielski, Danel Pociecha, Tomasz Tokarski e Paweł Kita. "Temperature Measurement in the Rotary Forming Process of a Nickel Superalloys (INCONEL) Sheet during Induction Heating". Key Engineering Materials 622-623 (setembro de 2014): 823–30. http://dx.doi.org/10.4028/www.scientific.net/kem.622-623.823.
Texto completo da fontePauzi, Ahmad Afiq, Mariyam Jameelah Ghazali, Wan Fathul Hakim W. Zamri e Armin Rajabi. "Wear Characteristics of Superalloy and Hardface Coatings in Gas Turbine Applications–A Review". Metals 10, n.º 9 (1 de setembro de 2020): 1171. http://dx.doi.org/10.3390/met10091171.
Texto completo da fonteCadoni, Ezio, Daniele Forni, Federico Mazzucato e Anna Valente. "Tensile behaviour of Inconel 718 alloys under extreme conditions of temperature and strain-rate". EPJ Web of Conferences 250 (2021): 05010. http://dx.doi.org/10.1051/epjconf/202125005010.
Texto completo da fonteGama, Renann Pereira, e Marcos Valério Ribeiro. "Effects of Cutting Fluid Application in the Performance of the Nimomic 80A Turning". Key Engineering Materials 656-657 (julho de 2015): 243–50. http://dx.doi.org/10.4028/www.scientific.net/kem.656-657.243.
Texto completo da fonteSafie, Syahilia Syahira, Muhamad Nasir Murad e Tan Chye Lih. "Performance of Castor Oil and Neem Oil as Metal Cutting Fluids in Drilling Inconel 718 Using MQL Technique on Tool Wear and Surface Roughness". Journal of Physics: Conference Series 2129, n.º 1 (1 de dezembro de 2021): 012070. http://dx.doi.org/10.1088/1742-6596/2129/1/012070.
Texto completo da fonteBlum, Wolfgang. "Role of Boundaries in Control of Deformation Rate and Strength of Crystalline Materials". Materials Science Forum 604-605 (outubro de 2008): 391–401. http://dx.doi.org/10.4028/www.scientific.net/msf.604-605.391.
Texto completo da fonteWallace Head, W. "A review of: “SUPERALLOYS, SUPERCOMPOSITES AND SUPERCERAMICS”edited by J.K. Tien and T. Caulfield Academic Press Inc. 755 pages, hard cover, 1989." Materials and Manufacturing Processes 5, n.º 4 (janeiro de 1990): 663–65. http://dx.doi.org/10.1080/10426919008953284.
Texto completo da fonteGadenin, M. M. "Computation and experimental analysis of the resistance of superalloys to low cycle deformations". Industrial laboratory. Diagnostics of materials 88, n.º 9 (21 de setembro de 2022): 61–68. http://dx.doi.org/10.26896/1028-6861-2022-88-9-61-68.
Texto completo da fonteNakamura, Morihiko. "Fundamental Properties of Intermetallic Compounds". MRS Bulletin 20, n.º 8 (agosto de 1995): 33–39. http://dx.doi.org/10.1557/s0883769400045085.
Texto completo da fonteSingh, Gurpreet, Vivek Aggarwal, Sehijpal Singh, Rajiv Kumar Garg e Balkar Singh. "Experimental and Analytical Investigation into Cutting Forces during Turning of EN-31 Steel in Different Machining Conditions". Key Engineering Materials 933 (17 de outubro de 2022): 42–61. http://dx.doi.org/10.4028/p-d72alb.
Texto completo da fonteRinck, Philipp M., Alpcan Gueray e Michael F. Zaeh. "Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V". International Journal of Advanced Manufacturing Technology 119, n.º 3-4 (30 de novembro de 2021): 1807–19. http://dx.doi.org/10.1007/s00170-021-08355-x.
Texto completo da fontePalanisamy, Duraiswamy, P. Thejasree, Umapathi Durai e Natarajan Manikandan. "A Study on the Machinability of Wire Electrical Discharge Machining of Nickel Alloy Using Taguchi Grey Approach". Key Engineering Materials 971 (20 de dezembro de 2023): 33–43. http://dx.doi.org/10.4028/p-2zae5p.
Texto completo da fonteKihara, Eliane Alves, Henara Lillian Costa e Demostenes Ferreira Filho. "Effect of the Shielding Gas and Heat Treatment in Inconel 625 Coatings Deposited by GMAW Process". Coatings 14, n.º 4 (28 de março de 2024): 396. http://dx.doi.org/10.3390/coatings14040396.
Texto completo da fonteNadolny, Krzysztof, Walery Sienicki e Michał Wojtewicz. "The effect of sulfurization on the grinding wheel cutting ability in the internal cylindrical grinding of nickel superalloys". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, n.º 1 (8 de agosto de 2016): 140–54. http://dx.doi.org/10.1177/0954405415572643.
Texto completo da fonteBerthod, Patrice, Merzouk Bouaraba e Junfu Cai. "Influence of the Chromium Content on the Characteristics of the Matrix, the Tantalum Carbides Population, and the Hardness of Cast Co(Cr)-0.4C-6Ta Alloys". Micro 3, n.º 1 (16 de fevereiro de 2023): 239–55. http://dx.doi.org/10.3390/micro3010017.
Texto completo da fonteChen, Kuan-Jen, e Hung-Mao Lin. "Effects of Niobium Carbide Additions on Ni-Based Superalloys: A Study on Microstructures and Cutting-Wear Characteristics through Plasma-Transferred-Arc-Assisted Deposition". Coatings 14, n.º 2 (28 de janeiro de 2024): 167. http://dx.doi.org/10.3390/coatings14020167.
Texto completo da fonteSequeiros, Elsa W., Anibal Guedes, Ana Maria Pires Pinto, Manuel F. Vieira e Filomena Viana. "Microstructure and Strength of γ-TiAl Alloy/Inconel 718 Brazed Joints". Materials Science Forum 730-732 (novembro de 2012): 835–40. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.835.
Texto completo da fonteMa, Ke, e Jinhai Wang. "Microstructural Characteristics and Mechanical Properties of an Additively Manufactured Nickel-Based Superalloy". Crystals 12, n.º 10 (26 de setembro de 2022): 1358. http://dx.doi.org/10.3390/cryst12101358.
Texto completo da fonteKapłonek, Wojciech, Krzysztof Nadolny, Krzysztof Rokosz, Jocelyne Marciano, Mozammel Mia, Danil Yurievich Pimenov, Olga Kulik e Munish Kumar Gupta. "Internal Cylindrical Grinding Process of INCONEL® Alloy 600 Using Grinding Wheels with Sol–Gel Alumina and a Synthetic Organosilicon Polymer-Based Impregnate". Micromachines 11, n.º 2 (21 de janeiro de 2020): 115. http://dx.doi.org/10.3390/mi11020115.
Texto completo da fonteSyed, Hasan Sohail, Abba Abdulhamid Abubakar e Abbas Saeed Hakeem. "A Material-by-Design Approach to Develop Ceramic- and Metallic-Particle-Reinforced Ca-α-SiAlON Composites for Improved Thermal and Structural Properties". Nanomaterials 12, n.º 13 (24 de junho de 2022): 2176. http://dx.doi.org/10.3390/nano12132176.
Texto completo da fonteCep, Robert, Adam Janasek, Jana Petru, Lenka Cepova, Andrej Czan e Jan Valicek. "Hard Machinable Machining of Cobalt-based Superalloy". Manufacturing Technology 13, n.º 2 (1 de junho de 2013): 142–47. http://dx.doi.org/10.21062/ujep/x.2013/a/1213-2489/mt/13/2/142.
Texto completo da fonteZhang, Chengcong, e Amir Shirzadi. "Fail-Safe Joints between Copper Alloy (C18150) and Nickel-Based Superalloy (GH4169) Made by Transient Liquid Phase (TLP) Bonding and Using Boron-Nickel (BNi-2) Interlayer". Metals 11, n.º 10 (23 de setembro de 2021): 1504. http://dx.doi.org/10.3390/met11101504.
Texto completo da fonteRazumovskiy, Vsevolod I., A. Y. Lozovoi, Igor M. Razumovskii e Andrei V. Ruban. "Analysis of the Alloying System in Ni-Base Superalloys Based on Ab Initio Study of Impurity Segregation to Ni Grain Boundary". Advanced Materials Research 278 (julho de 2011): 192–97. http://dx.doi.org/10.4028/www.scientific.net/amr.278.192.
Texto completo da fonteLi, Ye, e Chun Bin Cai. "Finite Element Analysis of High Temperature Alloy Cutting Process Based on Abaqus". Key Engineering Materials 667 (outubro de 2015): 237–43. http://dx.doi.org/10.4028/www.scientific.net/kem.667.237.
Texto completo da fonteSong, Jeonyoung, Jiho Gu, Jiho Gu, Won Hui Jo, Cho Hyeon Lee, Jae Bok Seol e Youngwha Ma. "Effect of Heat Treatment Temperature on Microstructure, Tensile Properties and δ-Precipitate Phase in Ni-based Superalloy". Korean Journal of Metals and Materials 62, n.º 1 (5 de janeiro de 2024): 32–38. http://dx.doi.org/10.3365/kjmm.2024.62.1.32.
Texto completo da fonteRomán-Sedano, Alfonso Monzamodeth, Bernardo Campillo, Julio C. Villalobos, Fermín Castillo e Osvaldo Flores. "Hydrogen Diffusion in Nickel Superalloys: Electrochemical Permeation Study and Computational AI Predictive Modeling". Materials 16, n.º 20 (10 de outubro de 2023): 6622. http://dx.doi.org/10.3390/ma16206622.
Texto completo da fonteJiang, Wenxiang, Xiaoyi Ren, Jinghao Zhao, Jianli Zhou, Jinyao Ma, Wenjing Zhang, Yuefei Zhang e Ze Zhang. "Crack Propagation Behavior of a Ni-Based Single-Crystal Superalloy during In Situ SEM Tensile Test at 1000 °C". Crystals 10, n.º 11 (17 de novembro de 2020): 1047. http://dx.doi.org/10.3390/cryst10111047.
Texto completo da fonteBirosca, S. "The deformation behaviour of hard and soft grains in RR1000 nickel-based superalloy". IOP Conference Series: Materials Science and Engineering 82 (24 de abril de 2015): 012033. http://dx.doi.org/10.1088/1757-899x/82/1/012033.
Texto completo da fonte