Literatura científica selecionada sobre o tema "Gas microsensors"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Gas microsensors".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Gas microsensors"
Sandfeld, Tobias, Louise Vinther Grøn, Laura Munoz, Rikke Louise Meyer, Klaus Koren e Jo Philips. "Considerations on the use of microsensors to profile dissolved H2 concentrations in microbial electrochemical reactors". PLOS ONE 19, n.º 1 (19 de janeiro de 2024): e0293734. http://dx.doi.org/10.1371/journal.pone.0293734.
Texto completo da fonteJung, Dong Geon, Junyeop Lee, Jin Beom Kwon, Bohee Maeng, Hee Kyung An e Daewoong Jung. "Low-Voltage-Driven SnO2-Based H2S Microsensor with Optimized Micro-Heater for Portable Gas Sensor Applications". Micromachines 13, n.º 10 (27 de setembro de 2022): 1609. http://dx.doi.org/10.3390/mi13101609.
Texto completo da fonteSiegal, M. P., W. G. Yelton, D. L. Overmyer e P. P. Provencio. "Nanoporous Carbon Films for Gas Microsensors". Langmuir 20, n.º 4 (fevereiro de 2004): 1194–98. http://dx.doi.org/10.1021/la034460s.
Texto completo da fonteVallejos, Stella, Zdenka Fohlerová, Milena Tomić, Isabel Gràcia, Eduard Figueras e Carles Cané. "Room Temperature Ethanol Microsensors Based on Silanized Tungsten Oxide Nanowires". Proceedings 2, n.º 13 (22 de novembro de 2018): 790. http://dx.doi.org/10.3390/proceedings2130790.
Texto completo da fonteSiegal, M. P., e W. G. Yelton. "Nanoporous-Carbon Coatings for Gas-Phase Chemical Microsensors". Advances in Science and Technology 48 (outubro de 2006): 161–68. http://dx.doi.org/10.4028/www.scientific.net/ast.48.161.
Texto completo da fontePenza, M., R. Rossi, M. Alvisi, D. Valerini, E. Serra, R. Paolesse, E. Martinelli, A. D'Amico e C. Di Natale. "Metalloporphyrin-Modified Carbon Nanotube Layers for Gas Microsensors". Sensor Letters 9, n.º 2 (1 de abril de 2011): 913–19. http://dx.doi.org/10.1166/sl.2011.1643.
Texto completo da fonteBolotov, V. V., P. M. Korusenko, S. N. Nesov, S. N. Povoroznyuk, V. E. Roslikov, E. A. Kurdyukova, Yu A. Sten’kin et al. "Nanocomposite por-Si/SnOx layers formation for gas microsensors". Materials Science and Engineering: B 177, n.º 1 (janeiro de 2012): 1–7. http://dx.doi.org/10.1016/j.mseb.2011.09.006.
Texto completo da fonteSwart, N., e A. Nathan. "Numerical study of heat transport in thermally isolated flow-rate microsensors". Canadian Journal of Physics 70, n.º 10-11 (1 de outubro de 1992): 904–7. http://dx.doi.org/10.1139/p92-143.
Texto completo da fonteVittoriosi, Alice, Juergen J. Brandner e Roland Dittmeyer. "Integrated temperature microsensors for the characterization of gas heat transfer". Journal of Physics: Conference Series 362 (23 de maio de 2012): 012021. http://dx.doi.org/10.1088/1742-6596/362/1/012021.
Texto completo da fontePenza, M., R. Rossi, M. Alvisi, D. Suriano e E. Serra. "Pt-modified carbon nanotube networked layers for enhanced gas microsensors". Thin Solid Films 520, n.º 3 (novembro de 2011): 959–65. http://dx.doi.org/10.1016/j.tsf.2011.04.178.
Texto completo da fonteTeses / dissertações sobre o assunto "Gas microsensors"
Kumar, Abhishek. "Development, characterization and experimental validation of metallophthalocyanines based microsensors devoted to monocyclic aromatic hydrocarbon monitoring in air". Thesis, Clermont-Ferrand 2, 2015. http://www.theses.fr/2015CLF22635/document.
Texto completo da fonteThis PhD work is dedicated to investigate potentialities of phthalocyanines materials to realize a Quartz Crystal Microbalance (QCM) sensor for Benzene, Toluene and Xylenes (BTX) detection in air. The goal is to develop a sensor-microsystem capable of measuring BTX concentrations quantitatively below the environmental guidelines with sufficient accuracy. To achieve these objectives, our strategies mainly focused on experimental works encompassing sensors realization, sensing material characterizations, development of gas-testing facility and sensor testing for different target gases. One of the main aims is to identify most appropriate phthalocyanine material for sensor development. After comparative sensing studies, tert-butyl-copper phthalocyanine based QCM device is found as most sensitive and detail metrological characteristics are further investigated. Results show repeatable, reversible and high magnitude of response, low response and recovery times, sub-ppm range detection limit, high resolutions and combined selectivity of BTX gases among common atmospheric pollutants. Special focus is given to understand the gas/material interactions which are achieved by (a) XRD and SEM characterizations of sensing layers, (b) formalization of a two-step adsorption model and (c) assessing extent of diffusion of target gas in sensing layer. At last, possible ageing of sensor and suitable storage conditions to prevent such effect are investigated
Abercrombie, Matthew G. "Acoustic microsensor with optical detection for high-temperature, high-pressure environments". Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/19467.
Texto completo da fonteAl-Khalifa, Sherzad. "Identification of a binary gas mixture from a single resistive microsensor". Thesis, University of Warwick, 2000. http://wrap.warwick.ac.uk/52652/.
Texto completo da fonteLawson, Bruno. "Nouvelle approche de suivi non invasif de l'alcoolémie par perspiration à l'aide de multicapteurs MOX". Electronic Thesis or Diss., Aix-Marseille, 2018. http://www.theses.fr/2018AIXM0698.
Texto completo da fonteA new approach of a noninvasive detection of blood alcohol concentration using ethanol microsensors based on SnO2 Is developed in this work. The methodology is based on an indirect detection of blood alcohol concentration by measuring the ethanol vapor emitted through the skin perspiration after alcohol consumption. In order to validate this approach, first we demonstrated the relevance and the feasibility of this detection method by carrying out pilot clinical trials in collaboration with a medical team of pharmacological study of CPCET Marseille. The different measurements of the ethanol concentration carried out in biological fluids such as blood and exhaled air could be precisely correlated with the measurements of ethanol vapors performed through the perspiration using three commercial gas microsensors based on metal oxides integrated into a bracelet. . These devices have the advantage of being sensitive but not selective to the nature of the gas detected. During this thesis work, sensitive layers of SnO2 were deposited by reactive magnetron RF sputtering on a transducer patented by our team, integrating three sensors on the same chip. The optimization of the deposition parameters and the structural analyzes of the SnO2 layers, allowed us to develop an ethanol multi-sensor demonstrating performances under ethanol; in terms of sensitivity on humidity, repeatability and response and recovery times as well as from the point of selectivity
Le, Pennec Fabien. "Développement de microcapteurs pour la mesure de dioxyde de carbone (CO2) : application au suivi de la qualité de l’air". Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0148.
Texto completo da fonteUnlike outdoor air pollution, indoor air pollution remained relatively understudied until the early 2000s. However, we spend on average 85% of our time in closed environments (home, offices, transport, etc. in which we are exposed to many pollutants. Numerous studies have shown that measuring the concentration of carbon dioxide makes it possible to assess the confinement of indoor air. To measure pollutants, we can distinguish between analyzers and microsensors, each with its advantages and disadvantages. In the case of indoor air quality, resistive type microsensors appear to be the most appropriate solution, due to their low cost, high sensitivity, possible miniaturization and low power consumption. The detection phenomenon is based on the variation of the electrical resistance of the sensitive element in response to a gas adsorption rate. My research work has focused on the study of the sensitive layer. We used the screen-printing deposit method, a simple, fast and inexpensive technique. The crystalline structure and the morphology could be determined as well as the identification of the chemical substances present in our materials according to physico-chemical characterization techniques. Our results showed that the sensors made from La2O2CO3 and BaTiO3, respectively, present good performances, with a high sensitivity to CO2, and a good repeatability rate
Chawich, Juliana. "ZnO/GaAs-based acoustic waves microsensor for the detection of bacteria in complex liquid media". Thesis, Bourgogne Franche-Comté, 2019. http://www.theses.fr/2019UBFCD012/document.
Texto completo da fonteThis thesis was conducted in the frame of an international collaboration between Université de Bourgogne Franche-Comté in France and Université de Sherbrooke in Canada. It addresses the development of a miniaturized biosensor for the detection and quantification of bacteria in complex liquid media. The targeted bacteria is Escherichia coli (E. coli), regularly implicated in outbreaks of foodborne infections, and sometimes fatal.The adopted geometry of the biosensor consists of a gallium arsenide (GaAs) membrane with a thin layer of piezoelectric zinc oxide (ZnO) on its front side. The contribution of ZnO structured in a thin film is a real asset to achieve better performances of the piezoelectric transducer and consecutively a better sensitivity of detection. A pair of electrodes deposited on the ZnO film allows the generation of an acoustic wave propagating in GaAs under a sinusoidal voltage, at a given frequency. The backside of the membrane is functionalized with a self-assembled monolayer (SAM) of alkanethiols and antibodies anti-E. coli, providing the specificity of detection. Thus, the biosensor benefits from the microfabrication and bio-functionalization technologies of GaAs, validated within the research team, and the promising piezoelectric properties of ZnO, to potentially achieve a highly sensitive and specific detection of the bacteria of interest. The challenge is to be able to detect and quantify these bacteria at very low concentrations in a complex liquid and/or biological sample.The research work partly focused on the deposition and characterization of piezoelectric ZnO thin films on GaAs substrates. The effect of the crystalline orientation of GaAs and the use of a titanium / platinum buffer layer between ZnO and GaAs were studied using different structural (X-ray diffraction, Raman spectroscopy, secondary ionization mass spectrometry), topographic (atomic force microscopy), optical (ellipsometry) and electrical characterizations. After the realization of the electrical contacts on top of the ZnO film, the GaAs membrane was micromachined using chemical wet etching. Once fabricated, the transducer was tested in air and liquid medium by electrical measurements, in order to determine the resonance frequencies for thickness shear mode. A protocol for surface bio-functionalization, validated in the laboratory, was applied to the back of the biosensor for anchoring SAMs and antibodies, while protecting the top side. Furthermore, different conditions of antibody grafting such as the concentration, pH and incubation time, were tested to optimize the immunocapture of bacteria. In addition, the impact of the pH and the conductivity of the solution to be tested on the response of the biosensor has been determined. The performances of the biosensor were evaluated by detection tests of the targeted bacteria, E. coli, while correlating electrical measurements with fluorescence microscopy. Detection tests were completed by varying the concentration of E. coli in environments of increasing complexity. Various types of controls were performed to validate the specificity criteria. Thanks to its small size, low cost of fabrication and rapid response, the proposed biosensor has the potential of being applied in clinical diagnostic laboratories for the detection of E. coli
Tsai, Ming-Chang, e 蔡明璋. "Gas Microsensors Based on the Nanoporous Structures". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/72631288731412096447.
Texto completo da fonte逢甲大學
自動控制工程學系
102
The research develops self-assembled anodic titanium oxide arrays fabricated by anodization and combines the microheater and temperature sensor manufactured by the photolithography and life-off process of the micro-electro-mechanical system technology to selectively detect the CO and CHCl3 gas in room temperature. The advantages of the gas sensors combine anodic titanium oxide thin film, noble metal electrodes, microheater and temperature sensor in the chip have small volume, high stability, high sensitivity and accuracy. The TiO2 arrays fabricated by anodization can built different aspect ratio nanotubes, the inner diameter range is 22-110 nm and the length range is 1.21-1.91μm, by controlling the voltage and anodic time and have high porosity to promote the sensitivity of the gas sensing ability of the sensing film. The gas microsensor can keep the sensor in the best temperature by control the voltage of the microheater and detect the environment temperature by temperature sensor. Experimental results are analyzed to find the relationship between the CO and CHCl3 gas concentrations, the characterization of sensitivity and operational temperatures. Compared to traditional gas sensors, the designed gas microsensors show higher sensitivity to detect CO gas by increasing variation of sensing resistance up to 146.1 % by sensing CO gas concentrations from 40 to 1000 ppm in 200 ℃ and to detect CHCl3 gas by increasing variation of sensing resistance up to 2.99 % by sensing CHCl3 gas concentrations from 10000 to 21000 ppm in room temperature.
Liu, Tze-chun, e 劉澤鈞. "Gas Microsensors Based on Nanoporous Anodic Aluminum Oxide". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/29622697040391545281.
Texto completo da fonte逢甲大學
自動控制工程所
99
A novel CO gas microsensor with tungsten oxide (WO3) sensing film on nanoporous anodic aluminum oxide (AAO) layer has been performed on anodic aluminum oxide template at operation temperature of 25 ℃. Based on microelectromechanical system (MEMS) technology, the microstructures are realized with porous AAO template, WO3 thin films, heaters, and interdigital temperature sensors. The platinum films were deposited to form the heaters, temperature sensors, and interdigital electrodes. To enhance sensitivity, the sputtered WO3 was grown on various nanoporous AAO structures. The study develops a novel porous anodic alumina processing system with a functional current feedback control module that provides control different conditions of voltage, temperature, and etching time to obtain uniform size of AAO film in the range from 20 nm to 104 nm. The self-ordered alumina membranes with a wide range of pore sizes are also achieved to increase sensing area of the microsensor. Experimental results are analyzed to find the relationship between the CO gas concentrations, the characterization of sensitivity and operational temperatures. Compared to traditional gas sensors, the designed CO gas microsensors show higher sensitivity by increasing variation of sensing resistance up to 87.4 % by sensing CO gas concentrations from 100 to 1000 ppm.
Yang, Ming-Zhi, e 楊閔智. "Integrated Gas Microsensors Array with Circuits on a Chip". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/65522409721908871607.
Texto completo da fonte國立中興大學
機械工程學系所
103
This study illustrates an integrated gas microsensors array chip fabricated using the standard 0.18 μm CMOS (complementary metal oxide semiconductor) process. The chip includes four gas sensors, four readout circuits and thermometers. The objectives of this study are to utilize the integrated gas microsensors array chip to detect four kinds of volatile organic compound (VOC) gases, the relative humidity of the surroundings and the ambient temperature. After completion of the CMOS process, the chip requires a post-process to etch the sacrificial layer between the interdigitated electrodes and to coat the sensitive film on the electrodes. The sensitive films of integrated gas microsensors array chips are α-Fe2O3, CuO, SnO2, ZrO2 and ZnO, which have good responses for detecting acetone, methanol, ethanol, ammonia and humidity gases, respectively. The characterizations of the sensitive films are observed using a field-emission scanning electron microscope (FE-SEM) to investigate the surface morphology and grain size. Energy dispersive spectrometry (EDS) and x-ray diffraction (XRD) are employed to estimate the chemical component analysis. The experimental results show that the sensitive films synthesized by the hydrothermal method can help the gas microsensors enhance the response due to a high surface-to-volume ratio and high pore density. The gas microsensors array chip has a high response and good selectively for detection of VOC gases. The response of VOC microsensors decreased as the relative humidity of the ambient increased. In the measurement of the gas microsensors integrated with the circuit, the ring oscillator circuit successfully converts the capacitance variation of the microsensors into the oscillation frequency output. The response of the gas microsensors integrated with the circuit is about 0.4-1.1 MHz/ppm. This study further measures the characteristics of the integrated gas microsensors array chip in an environment with multiple VOC gases (acetone, methanol, ethanol and ammonia). Measurement results demonstrate that these VOC microsensors can identify the target gases in multiple gas environments and realizes the objectives of real-time detection.
Zhuang, Yu-Xiang, e 莊寓翔. "Development of Nanofiber-based Gas Microsensors by Using Electrospun Technology". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/49677804564614472572.
Texto completo da fonte逢甲大學
自動控制工程學系
103
The research presents the design of metal-oxide semiconductor gas microsensors based on MEMS technology and nano-properties for sensing CO gas. Sensitivity is defined by measuring the variation of resistance for sensing layers caused by Schottky contanct when gas specimens adsorb on the surface of sensing films. In2O3 nanofibers sensing film with heaters is fabricated by electrospinning, lithography and deep etching processes. The devices can increase effective sensing area for chemical reactions on which CO gas molecules can be adsorbed to improve operation process and response time. Fabrication parameters of indium oxide sensing films are discussed at different voltage, flow rate, collection distance, to perform optimal nanofibers. The sensitivity for sensing the concentration of CO gas is concluded. This sensor integrated the heater temperature sensor and carbon monoxide gas sensor, with characteristic measurements as a result, validation and production of micro gas sensor characteristics are discussed. The heater of the sensor when additional 60 V, the highest temperature can reach 162 ℃, temperature sensor response to linear its sensitivity is 2.09 Ω/℃, gas sensor optimal operating temperature is 160 ℃. Electrostatic spinning wire sensor, measurement of carbon monoxide concentration of 50 to 500 ppm, resistance rate of 1.082 to 1.804.
Livros sobre o assunto "Gas microsensors"
Al-Khalifa, Sherzad. Identification of a binary gas mixture from a single resistive microsensor. [s.l.]: typescript, 2000.
Encontre o texto completo da fonteAdvanced Nanomaterials for Inexpensive Gas Microsensors. Elsevier, 2020. http://dx.doi.org/10.1016/c2017-0-02009-8.
Texto completo da fonteValero, Eduard Llobet. Advanced Nanomaterials for Inexpensive Gas Microsensors: Synthesis, Integration and Applications. Elsevier, 2019.
Encontre o texto completo da fonteValero, Eduard Llobet. Advanced Nanomaterials for Inexpensive Gas Microsensors: Synthesis, Integration and Applications. Elsevier, 2019.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Gas microsensors"
Panda, Dhananjaya, e Koteswara Rao Peta. "FEM Analysis of Split Electrode IDTs Designed Lithium Tantalate-Polyaniline SAW Gas Sensor". In Microactuators, Microsensors and Micromechanisms, 250–65. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-20353-4_20.
Texto completo da fonteAguir, Khalifa. "Responses and Electrical Properties of Gas Microsensors". In Chemical Sensors and Biosensors, 143–74. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118561799.ch7.
Texto completo da fonteSiegal, M. P., e W. G. Yelton. "Nanoporous-Carbon Coatings for Gas-Phase Chemical Microsensors". In Advances in Science and Technology, 161–68. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-04-4.161.
Texto completo da fontePenza, M., R. Rossi, M. Alvisi, D. Valerini, G. Cassano, E. Serra, R. Paolesse, E. Martinelli, C. Di Natale e A. D’Amico. "Gas Microsensors with Metalloporphyrin-Functionalized Carbon Nanotube Networked Layers". In Lecture Notes in Electrical Engineering, 105–11. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1324-6_15.
Texto completo da fonteMicheli, Adolph L., Shih-Chia Chang e David B. Hicks. "Tin Oxide Gas Sensing Microsensors from Metallo-Organic Deposited (MOD) Thin Films". In Ceramic Engineering and Science Proceedings, 1095–105. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2008. http://dx.doi.org/10.1002/9780470320419.ch9.
Texto completo da fonteRossi, R., M. Alvisi, G. Cassano, R. Pentassuglia, D. Dimaio, D. Suriano, E. Serra, E. Piscopiello, V. Pfister e M. Penza. "Tuned Sensing Properties of Metal-Modified Carbon-Based Nanostructures Layers for Gas Microsensors". In Lecture Notes in Electrical Engineering, 115–19. Boston, MA: Springer US, 2011. http://dx.doi.org/10.1007/978-1-4614-0935-9_20.
Texto completo da fonteMenini, Philippe. "Gas Microsensor Technology". In Chemical Sensors and Biosensors, 175–209. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118561799.ch8.
Texto completo da fonteDebéda, Hélène, e Isabelle Dufour. "Resonant microcantilever devices for gas sensing". In Advanced Nanomaterials for Inexpensive Gas Microsensors, 161–88. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-814827-3.00009-8.
Texto completo da fonteLlobet, Eduard. "Introduction". In Advanced Nanomaterials for Inexpensive Gas Microsensors, 1–15. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-814827-3.00001-3.
Texto completo da fonteHernandez-Ramirez, Francisco, Albert Romano-Rodriguez e Joan Daniel Prades. "Inorganic nanomaterials". In Advanced Nanomaterials for Inexpensive Gas Microsensors, 17–35. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-814827-3.00002-5.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Gas microsensors"
Contaret, T., S. Gomri, J. L. Seguin e K. Aguir. "Noise spectroscopy measurements in metallic oxide gas microsensors". In 2008 IEEE Sensors. IEEE, 2008. http://dx.doi.org/10.1109/icsens.2008.4716417.
Texto completo da fonteBolotov, Valeriy V., Vladislav E. Roslikov, Egor V. Knyazev, Roman V. Shelyagin, Ekaterina A. Kurdyukova e Dmitriy V. Cheredov. "Synthesis of nanocomposite CNT/SnOx for Gas microsensors". In 2010 11th International Conference and Seminar of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM 2010). IEEE, 2010. http://dx.doi.org/10.1109/edm.2010.5568669.
Texto completo da fonteKozlov, A. G. "Thermal analysis of micro-hotplates for catalytic gas microsensors". In 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2015. http://dx.doi.org/10.1109/eurosime.2015.7103094.
Texto completo da fonteCastro-Hurtado, Irene, Isabel Ayerdi, Enrique Castano, Angel Ma Gutierrez e Juan Ramon Arraibi. "Microsensors for the multiparametric analysis of natural gas quality". In 2015 10th Spanish Conference on Electron Devices (CDE). IEEE, 2015. http://dx.doi.org/10.1109/cde.2015.7087482.
Texto completo da fonteWalton, Robin M., Richard E. Cavicchi, Stephen Semancik, Balaji Panchapakesan, Don L. DeVoe, Maria I. Aquino-Class, James D. Allen e John S. Suehle. "Solid state gas microsensors for environmental and industrial monitoring". In Photonics East '99, editado por Tuan Vo-Dinh e Robert L. Spellicy. SPIE, 1999. http://dx.doi.org/10.1117/12.372861.
Texto completo da fonteTomic, Milena, Isabel Gracia, Marc Salleras, Eduard Figueras, Carles Cane e Stella Vallejos. "Gas Microsensors Based on Cerium Oxide Modified Tungsten Oxide Nanowires". In 2018 12th Spanish Conference on Electron Devices (CDE). IEEE, 2018. http://dx.doi.org/10.1109/cde.2018.8597067.
Texto completo da fonteBenkstein, K. D., A. Vergara, C. B. Montgomery, S. Semancik e B. Raman. "Methods for optimizing and extending the performance of chemiresistive gas microsensors". In 2013 IEEE Sensors. IEEE, 2013. http://dx.doi.org/10.1109/icsens.2013.6688194.
Texto completo da fonteBen Youssef, I., F. Sarry, O. Elmazria, I. Ben Youssef, H. Alem, A. Jonquieres e R. Jimenez-Rioboo. "Development of new polyurethanimide tailored copolymers for SO2 SAW gas microsensors". In 2010 IEEE Ultrasonics Symposium (IUS). IEEE, 2010. http://dx.doi.org/10.1109/ultsym.2010.5935523.
Texto completo da fonteKozlov, A. G. "Modelling of thermal processes in catalytic gas microsensors implementing a measurement of combustible gas concentration". In 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2016. http://dx.doi.org/10.1109/eurosime.2016.7463374.
Texto completo da fonteXie, Haifen, Jiangsheng Wu, Peng Huang, Xinming Ji e Yiping Hunag. "The study of the gas microsensors based on polymer-carbon black composites". In 2006 8th International Conference on Solid-State and Integrated Circuit Technology. IEEE, 2006. http://dx.doi.org/10.1109/icsict.2006.306399.
Texto completo da fonteRelatórios de organizações sobre o assunto "Gas microsensors"
Grate, Jay W., e D. A. Nelson. Sorptive Polymers and Photopatterned Films for Gas Phase Chemical Microsensors and Arrays. Office of Scientific and Technical Information (OSTI), dezembro de 2002. http://dx.doi.org/10.2172/15010066.
Texto completo da fonteDr. Steve Semancik. Correlation of Chemisorption and Electronic Effects for Metal Oxide Interfaces: Transducing Principles for Temperature Programmed Gas Microsensors. Office of Scientific and Technical Information (OSTI), janeiro de 2002. http://dx.doi.org/10.2172/791537.
Texto completo da fonteSemancik, Steve, Michael Tarlov, Richard Cavicchi, John S. Suehle e Thomas J. McAvoy. Correlation of Chemisorption and Electronic Effects for Metal/Oxide Interfaces: Transducing Principles for Temperature-Programmed Gas Microsensors. Office of Scientific and Technical Information (OSTI), junho de 1999. http://dx.doi.org/10.2172/833292.
Texto completo da fonteSemancik, Steve, Richard E. Cavicchi e Thomas J. McAvoy. Correlation of Chemisorption and Electronic Effects for Metal/Oxide Interfaces: Transducing Principles for Temperature-Programmed Gas Microsensors. Office of Scientific and Technical Information (OSTI), junho de 2000. http://dx.doi.org/10.2172/833296.
Texto completo da fonteS. Semancik, R. E. Cavicchi, D. L. DeVoe e T. J. McAvoy. Correlation of Chemisorption and Electronic Effects for Metal Oxide Interfaces: Transducing Principles for Temperature Programmed Gas Microsensors (Final Report). Office of Scientific and Technical Information (OSTI), dezembro de 2001. http://dx.doi.org/10.2172/793127.
Texto completo da fonteCASALNUOVO, STEPHEN A., GREGORY CHARLES ASON, EDWIN J. HELLER, VINCENT M. HIETALA, ALBERT G. BACA e S. L. HIETALA. The development of integrated chemical microsensors in GaAs. Office of Scientific and Technical Information (OSTI), novembro de 1999. http://dx.doi.org/10.2172/750935.
Texto completo da fonteDavis, Chad Edward, Michael Loren Thomas, Jerome L. Wright, Phillip Isabio Pohl, Robert Clark Hughes, Yifeng Wang, Lucas K. McGrath, Clifford Kuofei Ho e Huizhen Gao. Potential application of microsensor technology in radioactive waste management with emphasis on headspace gas detection. Office of Scientific and Technical Information (OSTI), setembro de 2004. http://dx.doi.org/10.2172/919659.
Texto completo da fonteHughes, R. C., e G. C. Osbourn. The final LDRD report for the project entitled: {open_quotes}Enhanced analysis of complex gas mixtures by pattern recognition of microsensor array signals{close_quotes}. Office of Scientific and Technical Information (OSTI), setembro de 1996. http://dx.doi.org/10.2172/393333.
Texto completo da fonte