Artigos de revistas sobre o tema "Freeformer"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Freeformer".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Fateri, Miranda, João Falcão Carneiro, Constantin Schuler, João Bravo Pinto, Fernando Gomes de Almeida, Udo Grabmeier, Tobias Walcher e Michael Salinas. "Impact of 3D Printing Technique and TPE Material on the Endurance of Pneumatic Linear Peristaltic Actuators". Micromachines 13, n.º 3 (28 de fevereiro de 2022): 392. http://dx.doi.org/10.3390/mi13030392.
Ceskova, Martina, e Petr Lenfeld. "POLYMER CAVITY MADE BY FREEFORMER® 3D PRINTER: AN INFLUENCE ON INJECTION MOULDED PARTS". MM Science Journal 12, n.º 2018 (12 de dezembro de 2018): 2710–14. http://dx.doi.org/10.17973/mmsj.2018_12_2018125.
Giacoppo, Giuliano A., Julia Hötzel e Peter P. Pott. "Additively Manufactured Porous Filling Pneumatic Network Actuator". Actuators 12, n.º 11 (7 de novembro de 2023): 414. http://dx.doi.org/10.3390/act12110414.
Liu, Junfeng, Yuqian Zhao, Kexian Liu, Linfeng Wang e Fei Li. "Compensation machining of freeform based on fast tool servo system". PLOS ONE 18, n.º 3 (16 de março de 2023): e0282752. http://dx.doi.org/10.1371/journal.pone.0282752.
Horii, T., M. Ishikawa, Soshu Kirihara, Yoshinari Miyamoto e Nobu Yamanaka. "Development of Freeform Fabrication of Metals by Three Diminsional Micro-Welding". Solid State Phenomena 127 (setembro de 2007): 189–94. http://dx.doi.org/10.4028/www.scientific.net/ssp.127.189.
Frank, Samson, Maria Reichenbächer, Michael Seiler, Thomas Arnold e Jens Bliedtner. "Investigation on Subsurface Damage Patterns in Ultrashort Pulse Laser Machining of Glass using Optical Coherence Tomography". EPJ Web of Conferences 287 (2023): 05024. http://dx.doi.org/10.1051/epjconf/202328705024.
Zhu, Z., B. Peng, J. Yuan e X. Xu. "Design method of double freeform surface lens with diffuse reflection". Lighting Research & Technology 52, n.º 2 (4 de fevereiro de 2019): 247–56. http://dx.doi.org/10.1177/1477153519825875.
Wang, Xuchu, Qingshun Bai, Siyu Gao, Liang Zhao e Kai Cheng. "A Toolpath Planning Method for Optical Freeform Surface Ultra-Precision Turning Based on NURBS Surface Curvature". Machines 11, n.º 11 (9 de novembro de 2023): 1017. http://dx.doi.org/10.3390/machines11111017.
Kong, Lingbao, Yingao Ma, Mingjun Ren, Min Xu e Chifai Cheung. "Generation and characterization of ultra-precision compound freeform surfaces". Science Progress 103, n.º 1 (10 de outubro de 2019): 003685041988011. http://dx.doi.org/10.1177/0036850419880112.
Li, Hua, Suet To, Ling Bao Kong, Chi Fai Cheung e Wing Bun Lee. "Inspection Technology for F-Theta Lens: Practices and Discussions". Key Engineering Materials 364-366 (dezembro de 2007): 1191–96. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.1191.
Zhang, Yilan, Haodong Shi e Huilin Jiang. "Analysis of polarization characteristics of freeform surface optical system". ITM Web of Conferences 45 (2022): 01053. http://dx.doi.org/10.1051/itmconf/20224501053.
Hu, Zhang Fang, Jian Wei Mao e Yuan Luo. "Research on LED Lighting Secondary Light Distribution by Using a Freeform Lens". Applied Mechanics and Materials 103 (setembro de 2011): 138–41. http://dx.doi.org/10.4028/www.scientific.net/amm.103.138.
Liu, Xinyu, e Jun Zhu. "Design Method of Freeform Off-Axis Multi-Mirror Optical Systems". Photonics 9, n.º 8 (30 de julho de 2022): 534. http://dx.doi.org/10.3390/photonics9080534.
Luo, D., P. Ge, D. Liu e H. Wang. "A combined lens design for an LED low-beam motorcycle headlight". Lighting Research & Technology 50, n.º 3 (6 de março de 2017): 456–66. http://dx.doi.org/10.1177/1477153517697370.
Burada, Dali Ramu, Kamal K. Pant, Vinod Mishra, Mohamed Bichra, Gufran Sayeed Khan, Stefan Sinzinger e Chandra Shakher. "Development of a metrology technique suitable for in situ measurement and corrective manufacturing of freeform optics". Advanced Optical Technologies 8, n.º 3-4 (26 de junho de 2019): 203–15. http://dx.doi.org/10.1515/aot-2018-0072.
Sieber, Ingo, Allen Yi e Ulrich Gengenbach. "Metrology Data-Based Simulation of Freeform Optics". Applied Sciences 8, n.º 12 (22 de novembro de 2018): 2338. http://dx.doi.org/10.3390/app8122338.
Wang, Su Juan, Su Et To, Xin Chen e Jian Qun Liu. "Development of Cutting Strategy in Ultra-Precision Raster Milling of Freeform Surface". Applied Mechanics and Materials 633-634 (setembro de 2014): 615–19. http://dx.doi.org/10.4028/www.scientific.net/amm.633-634.615.
Lee, Dongyoun, e Junho Hong. "Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork". Buildings 12, n.º 9 (30 de agosto de 2022): 1335. http://dx.doi.org/10.3390/buildings12091335.
Chen, Xun. "Corrective Abrasive Polishing Processes for Freeform Surface". Key Engineering Materials 404 (janeiro de 2009): 103–12. http://dx.doi.org/10.4028/www.scientific.net/kem.404.103.
Lee, Hyun, Tae-Sik Jang, Ginam Han, Hae-Won Kim e Hyun-Do Jung. "Freeform 3D printing of vascularized tissues: Challenges and strategies". Journal of Tissue Engineering 12 (janeiro de 2021): 204173142110572. http://dx.doi.org/10.1177/20417314211057236.
Nagdeve, Leeladhar, V. K. Jain e J. Ramkumar. "Nanofinishing of freeform/sculptured surfaces: state-of-the-art". Manufacturing Review 5 (2018): 6. http://dx.doi.org/10.1051/mfreview/2018005.
Mishra, Vinod, Dali R. Burada, Vinod Karar, Alakesh Manna, Sunil Jha e Gufran Sayeed Khan. "Investigations on flexible pad polishing for nano-finishing of freeform optics mold". Journal of Micromanufacturing 3, n.º 2 (30 de setembro de 2020): 99–112. http://dx.doi.org/10.1177/2516598420939740.
Wang, Su Juan, Chi Fai Cheung, Sandy To e Wing Bun Lee. "Fabrication of Freeform Optics in Ultra-Precision Raster Milling". Key Engineering Materials 339 (maio de 2007): 412–16. http://dx.doi.org/10.4028/www.scientific.net/kem.339.412.
Henkel, Sebastian, Christian Schulze, Samson Frank, Christoph Letsch, Jens Bliedtner, Thomas Arnold, Heike Müller e Edda Rädlein. "Investigations on a novel process chain for manufacturing of freeform surfaces". EPJ Web of Conferences 266 (2022): 03010. http://dx.doi.org/10.1051/epjconf/202226603010.
Jiang, W., Bill Tse, Roy Louie e Frankie Chan. "Diamond Turning Freeform Optics". Key Engineering Materials 364-366 (dezembro de 2007): 1–6. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.1.
Li, H. F., Chi Fai Cheung, Ling Bao Kong, Wing Bun Lee e Sandy To. "A Study of Measurement Technology for Ultra-Precision Freeform Surfaces". Key Engineering Materials 339 (maio de 2007): 417–21. http://dx.doi.org/10.4028/www.scientific.net/kem.339.417.
Liu, Qi Tong, Jian Ming Zhan e Jian Hua Mao. "Study on Profile-Adaptive Tool System for Small Robots in Large Freeform Surface Polishing". Applied Mechanics and Materials 37-38 (novembro de 2010): 1327–31. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.1327.
Zhang, Shen, Jian Jun Wu e Liang Cai Deng. "Springback Prediction and Compensation for Thick Freeform Surface Parts Forming". Applied Mechanics and Materials 271-272 (dezembro de 2012): 498–503. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.498.
Song, Y., J. S. M. Vergeest e W. F. Bronsvoort. "Fitting and Manipulating Freeform Shapes Using Templates". Journal of Computing and Information Science in Engineering 5, n.º 2 (27 de dezembro de 2004): 86–94. http://dx.doi.org/10.1115/1.1875592.
Zhu, Jiang, Keisuke Nomura, Tomohisa Tanaka e Yoshio Saito. "Tool Path Planning Assist System for Freeform Surface Machining". Key Engineering Materials 447-448 (setembro de 2010): 321–25. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.321.
Meinzer, Nina. "Freeform fabrication". Nature Physics 18, n.º 1 (janeiro de 2022): 9. http://dx.doi.org/10.1038/s41567-021-01497-5.
Prautzsch, Hartmut. "Freeform splines". Computer Aided Geometric Design 14, n.º 3 (abril de 1997): 201–6. http://dx.doi.org/10.1016/s0167-8396(96)00029-5.
Huang, Ya, Ri Hong Zhu, Jun Ma e Hua Shen. "Asphericity and Discrete Phase Calculation for Optical Freeform Surface Test with Computer Generated Holograms". Advanced Materials Research 718-720 (julho de 2013): 1797–803. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.1797.
Kong, Ling Bao, Chi Fai Cheung, Wing Bun Lee e Sandy To. "A Framework of an Integrated Platform for Modelling and Measurement of Freeform Surface Generation in Ultra-Precision Raster Milling". Key Engineering Materials 339 (maio de 2007): 422–26. http://dx.doi.org/10.4028/www.scientific.net/kem.339.422.
Xiong, Juan, e Li Na Han. "Application of CAD/CAM Technology on the Modeling of Freeform Surface Parts". Applied Mechanics and Materials 121-126 (outubro de 2011): 3160–64. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.3160.
Geyl, Roland, François Houbre, Yan Cornil, Thierry Lepine e Yvan Sortais. "Optiques freeforms : défis et perspectives". Photoniques, n.º 106 (janeiro de 2021): 17–21. http://dx.doi.org/10.1051/photon/202110617.
Dai, Yi Dan, En Shi Qu, Li Yong Ren, Xin Chao Du e Hai Juan Ju. "The Design of Freeform Surface Fresnel Lens Used for LED Uniform Illumination". Applied Mechanics and Materials 571-572 (junho de 2014): 976–79. http://dx.doi.org/10.4028/www.scientific.net/amm.571-572.976.
Wang, Tsung-Hsien, Olivia Espinosa Trujillo, Wen-Shao Chang e Bailin Deng. "Encoding bamboo’s nature for freeform structure design". International Journal of Architectural Computing 15, n.º 2 (junho de 2017): 169–82. http://dx.doi.org/10.1177/1478077117714943.
Ji, Shijun, Huijuan Yu e Ji Zhao. "An Improved Method for Generating Cutter Points Based on Required Form Accuracy of the Machining Surface". Mathematical Problems in Engineering 2015 (2015): 1–8. http://dx.doi.org/10.1155/2015/940643.
Li, Jing Yuan, Ren Ping Xu, Kun Qian Wang e Rui Bo Hu. "The Development and Innovation of Yunnan Clay Handicraft Base on the FreeForm System". Advanced Materials Research 230-232 (maio de 2011): 206–11. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.206.
Lai, J., X. Li e P. Ge. "Designing double freeform surfaces for point source and extended sources using a construction, iteration and optimization process". Lighting Research & Technology 51, n.º 7 (22 de outubro de 2018): 1118–27. http://dx.doi.org/10.1177/1477153518807507.
Wei, Yi, Peng Zhai, Xiaoyi Chen e Lei He. "Study on Design and Diamond Turning of Optical Freeform Surface for Progressive Addition Lenses". Mathematical Problems in Engineering 2020 (22 de fevereiro de 2020): 1–9. http://dx.doi.org/10.1155/2020/2850606.
Langerak, Thomas R. "Local parameterization of freeform shapes using freeform feature recognition". Computer-Aided Design 42, n.º 8 (agosto de 2010): 682–92. http://dx.doi.org/10.1016/j.cad.2010.02.004.
Du, Xu, Jie Huang, Li-Min Zhu e Han Ding. "Third-order chord error estimation for freeform contour in computer-aided manufacturing and computer numerical control systems". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, n.º 3 (21 de fevereiro de 2018): 863–74. http://dx.doi.org/10.1177/0954405418757266.
Elber, Gershon. "Multiresolution Curve Editing With Linear Constraints*". Journal of Computing and Information Science in Engineering 1, n.º 4 (1 de outubro de 2001): 347–55. http://dx.doi.org/10.1115/1.1430679.
Xiong, Juan, e Lan Feng Sun. "Three-Dimensional Modeling and Analysis for Runner Blades of Turbine". Applied Mechanics and Materials 121-126 (outubro de 2011): 1521–25. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.1521.
Van, Quy Hoang, e Tuyen Bui Ngoc. "Effect of Feed Rate, Tool-Path and Step over on Geometric Accuracy of Freeform Surfaces when 3 Axis CNC Milling". Applied Mechanics and Materials 889 (março de 2019): 107–14. http://dx.doi.org/10.4028/www.scientific.net/amm.889.107.
KIM, JUNG SU, DONG SOO KIM, MIN CHEOL LEE e WON HEE LEE. "A METHOD OF 3D FREEFORM FABRICATION USING A CURING OF PHOTOPOLYMER RESIN". International Journal of Modern Physics B 22, n.º 09n11 (30 de abril de 2008): 1839–45. http://dx.doi.org/10.1142/s021797920804750x.
Ren, Ming Jun, Chi Fai Cheung e Ling Bao Kong. "A Study of Fiducial Aided Precision Positioning of Ultra-Precision Freeform Surfaces". Key Engineering Materials 679 (fevereiro de 2016): 167–71. http://dx.doi.org/10.4028/www.scientific.net/kem.679.167.
Ge, Q. J., e M. Sirchia. "Computer Aided Geometric Design of Two-Parameter Freeform Motions". Journal of Mechanical Design 121, n.º 4 (1 de dezembro de 1999): 502–6. http://dx.doi.org/10.1115/1.2829489.