Literatura científica selecionada sobre o tema "Forage percussif"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Forage percussif".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Forage percussif"
Pereira, Helen Batista Menezes, Joyce Ferreira do Nascimento, Carina Printes Lobato, Mariana Silveira Brasil, Silas Fernandes Goes, Gabriela de Figueiredo Meira, Luana Pontes Barros Lopes e André Luiz Cabral da Silva. "Tratamento endodôntico em dente com rizogênese incompleta com a utilização do hidróxido de cálcio: Relato de caso". Research, Society and Development 10, n.º 16 (19 de dezembro de 2021): e579101624416. http://dx.doi.org/10.33448/rsd-v10i16.24416.
Texto completo da fonte"Taux de forage des forets de percussion rotative et caractéristiques de la roche". Journal of Terramechanics 25, n.º 3 (janeiro de 1988): 239. http://dx.doi.org/10.1016/0022-4898(88)90007-9.
Texto completo da fonteTeses / dissertações sobre o assunto "Forage percussif"
Aldannawy, Houssam Aldine. "Le forage percussif en conditions extrêmes : expérimentations et modélisations numériques". Electronic Thesis or Diss., Université Paris sciences et lettres, 2022. http://www.theses.fr/2022UPSLM043.
Texto completo da fontePercussive drilling is a technology that consists in applying a series of dynamic impacts leading to the rock fragmentation by two main mechanisms: crushing and chipping. These mechanisms are highly influenced by many factors on which experimental and numerical investigations were carried out in this thesis. An experimental set up was developed to carry out dynamic impact tests. Several series of tests were realized and their results were measured using a precise measurement system which was also developed during the thesis. As for the numerical work, a virtual laboratory was built based on an elasto-viscoplastic constitutive model validated on laboratory tests to describe the granite behavior and a contact mechanism to simulate the insert-rock interaction during a dynamic impact. First, several parametric studies were carried out on a homogeneous material. Secondly, a new heterogeneity modeling approach was developed to describe the distribution of minerals in the granite. These studies have provided essential elements for understanding the physical mechanisms of hard rocks destruction in percussion, for evaluating the effects of the main drilling parameters and factors and for optimizing the drilling tool
Livros sobre o assunto "Forage percussif"
Instant Sound Forge. San Francisco, CA: CMP Books, 2004.
Encontre o texto completo da fontePark, Chan E., Adnan Hossain, William Grange, Judith Fletcher, Domenico Pietropaolo, Hanne M. de Bruin, Josh Stenberg et al. Korean Pansori as Voice Theatre. Bloomsbury Publishing Plc, 2023. http://dx.doi.org/10.5040/9781350174917.
Texto completo da fonteCapítulos de livros sobre o assunto "Forage percussif"
Glocker, Christoph. "Percussion Drilling Machine". In Set-Valued Force Laws, 183–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-540-44479-4_13.
Texto completo da fonteAllen, Ray. "J’Ouvert in Brooklyn". In Jump Up!, 207–34. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190656843.003.0009.
Texto completo da fonteLapidus, Benjamin. "Strings and Skins". In New York and the International Sound of Latin Music, 1940-1990, 54–81. University Press of Mississippi, 2020. http://dx.doi.org/10.14325/mississippi/9781496831286.003.0002.
Texto completo da fonteBraga, Sandro Moreira, Erbert Costa Lopes e Antônia Lidiane de Sousa Leitão. "CONTRIBUIÇÃO PARA INTERPRETAÇÃO DO PROCESSO DE SONDAGENS A PERCUSSÃO MECANIZADA PARA PROJETOS DE FUNDAÇÕES". In Geotecnologias: análises, técnicas e aplicações em pesquisa, 46–63. Editora Científica Digital, 2024. http://dx.doi.org/10.37885/240115595.
Texto completo da fonteAfzali, Behdad, e Rupert P. M. Negus. "Abdomen". In The Pocketbook for PACES. Oxford University Press, 2012. http://dx.doi.org/10.1093/oso/9780199574186.003.0011.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Forage percussif"
Peltokangas, Suvi, Sirpa Launis, Markus Saarela e Jouni Mattila. "Modeling and Simulation of a Hydraulic Drill for Control System Design Purposes". In ASME/BATH 2017 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/fpmc2017-4290.
Texto completo da fonteSun, Zhaowei, Xiaoguang Wu, Rui Yang, Zhongwei Huang, Huaizhong Shi, Zongjie Mu e Huiyong Yu. "Numerical Analysis on Characteristics of Cracks and ROP Enhancement Performance in Hard Rocks Subjected to Axial-Torsional Coupled Percussion". In 57th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/arma-2023-0347.
Texto completo da fonteQuan, Qiquan, S. Li, S. Jiang, X. Hou e Z. Deng. "Control of Drilling and Coring Device Based on Online Identification". In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62804.
Texto completo da fonteFang, Zhou, Gang Wu, Ce Song, Jun Yuan e Zhe Wang. "Study on the Mechanical Response of Gas Cylinders Under Shock Load". In ASME 2023 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/pvp2023-107108.
Texto completo da fonteJi, Ran, Huaizhong Shi, Zhaowei Sun, Han Chen, Chao Xiong e Hengyu Song. "Characteristics of Conicl Diamond Tooth for Breaking Hard Rock Under Vibratory Percussion". In 57th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/arma-2023-0637.
Texto completo da fonteHatman, Victor G., Imtiaz Haque e Amit Bagchi. "Dynamics of a Flexible Rotating Beam Under Percussive and Constrained Motion". In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0714.
Texto completo da fonteF. Paiva, Lucas, Hugo G. Lopes, Leonardo B. Felix e Rodolpho V. A. Neves. "Estimação do compasso musical do forró utilizando rede perceptron multicamadas". In Congresso Brasileiro de Automática - 2020. sbabra, 2020. http://dx.doi.org/10.48011/asba.v2i1.1331.
Texto completo da fonteMishima, Akira, Yusuke Fuke, Atsuyuki Miura, Toshiki Hirogaki e Eiichi Aoyama. "Playing a Musical Saw With a Humanoid Robot: Investigation for Industrial Automation". In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97731.
Texto completo da fonteCherng, John G., Tong Ge e Sheng-Lih Peng. "Vibration Isolation and Damping for Bucking Bars". In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-4119.
Texto completo da fonteFu, Xinkang, Zhongwei Huang, Jinming Sun, Huaizhong Shi, Jiawei Zhang, Guodong Ji e Hengyu Song. "Numerical Simulation on Damage Characteristics of Carbonate Rock Under Axial-Torsional Coupled Impact by PDC Cutters". In 57th U.S. Rock Mechanics/Geomechanics Symposium. ARMA, 2023. http://dx.doi.org/10.56952/arma-2023-0593.
Texto completo da fonte