Bibliografias temáticas / Fluid-structure interaction – Mathematical models

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências

Literatura científica selecionada sobre o tema "Fluid-structure interaction – Mathematical models"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 1 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Fluid-structure interaction – Mathematical models".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Fluid-structure interaction – Mathematical models"

Griffith, Boyce E., e Neelesh A. Patankar. "Immersed Methods for Fluid–Structure Interaction". Annual Review of Fluid Mechanics 52, n.º 1 (5 de janeiro de 2020): 421–48. http://dx.doi.org/10.1146/annurev-fluid-010719-060228.

Texto completo da fonte

Resumo:

Fluid–structure interaction is ubiquitous in nature and occurs at all biological scales. Immersed methods provide mathematical and computational frameworks for modeling fluid–structure systems. These methods, which typically use an Eulerian description of the fluid and a Lagrangian description of the structure, can treat thin immersed boundaries and volumetric bodies, and they can model structures that are flexible or rigid or that move with prescribed deformational kinematics. Immersed formulations do not require body-fitted discretizations and thereby avoid the frequent grid regeneration that can otherwise be required for models involving large deformations and displacements. This article reviews immersed methods for both elastic structures and structures with prescribed kinematics. It considers formulations using integral operators to connect the Eulerian and Lagrangian frames and methods that directly apply jump conditions along fluid–structure interfaces. Benchmark problems demonstrate the effectiveness of these methods, and selected applications at Reynolds numbers up to approximately 20,000 highlight their impact in biological and biomedical modeling and simulation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Benaroya, Haym, e Rene D. Gabbai. "Modelling vortex-induced fluid–structure interaction". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 366, n.º 1868 (5 de novembro de 2007): 1231–74. http://dx.doi.org/10.1098/rsta.2007.2130.

Texto completo da fonte

Resumo:

The principal goal of this research is developing physics-based, reduced-order, analytical models of nonlinear fluid–structure interactions associated with offshore structures. Our primary focus is to generalize the Hamilton's variational framework so that systems of flow-oscillator equations can be derived from first principles. This is an extension of earlier work that led to a single energy equation describing the fluid–structure interaction. It is demonstrated here that flow-oscillator models are a subclass of the general, physical-based framework. A flow-oscillator model is a reduced-order mechanical model, generally comprising two mechanical oscillators, one modelling the structural oscillation and the other a nonlinear oscillator representing the fluid behaviour coupled to the structural motion. Reduced-order analytical model development continues to be carried out using a Hamilton's principle-based variational approach. This provides flexibility in the long run for generalizing the modelling paradigm to complex, three-dimensional problems with multiple degrees of freedom, although such extension is very difficult. As both experimental and analytical capabilities advance, the critical research path to developing and implementing fluid–structure interaction models entails formulating generalized equations of motion, as a superset of the flow-oscillator models; and developing experimentally derived, semi-analytical functions to describe key terms in the governing equations of motion. The developed variational approach yields a system of governing equations. This will allow modelling of multiple d.f. systems. The extensions derived generalize the Hamilton's variational formulation for such problems. The Navier–Stokes equations are derived and coupled to the structural oscillator. This general model has been shown to be a superset of the flow-oscillator model. Based on different assumptions, one can derive a variety of flow-oscillator models.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Surana, K. S., B. Blackwell, M. Powell e J. N. Reddy. "Mathematical models for fluid–solid interaction and their numerical solutions". Journal of Fluids and Structures 50 (outubro de 2014): 184–216. http://dx.doi.org/10.1016/j.jfluidstructs.2014.06.023.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lopes, D., H. Puga, J. C. Teixeira e S. F. Teixeira. "Fluid–Structure Interaction study of carotid blood flow: Comparison between viscosity models". European Journal of Mechanics - B/Fluids 83 (setembro de 2020): 226–34. http://dx.doi.org/10.1016/j.euromechflu.2020.05.010.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Marom, Gil. "Numerical Methods for Fluid–Structure Interaction Models of Aortic Valves". Archives of Computational Methods in Engineering 22, n.º 4 (2 de outubro de 2014): 595–620. http://dx.doi.org/10.1007/s11831-014-9133-9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Tello, Alexis, Ramon Codina e Joan Baiges. "Fluid structure interaction by means of variational multiscale reduced order models". International Journal for Numerical Methods in Engineering 121, n.º 12 (27 de fevereiro de 2020): 2601–25. http://dx.doi.org/10.1002/nme.6321.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Larsson, Jonas. "A new Hamiltonian formulation for fluids and plasmas. Part 2. MHD models". Journal of Plasma Physics 55, n.º 2 (abril de 1996): 261–78. http://dx.doi.org/10.1017/s0022377800018821.

Texto completo da fonte

Resumo:

The new Hamiltonian formulation of the perfect fluid equations presented in part 1 of this series of papers is generalized to a class of IVIHD models, including for example ideal MHD and the Chew–Goldberger–Low equations. The mathematical structure is to a great extent unchanged by this generalization, and most results about the small-amplitude expansion of the perfect fluid equations remain obviously valid. For example, we now have a rigorous proof of the Manley-Rowe relations in resonant three-wave interaction, valid for this class of MHD models and for quite general inhomogeneous but stationary background states, including equilibrium flows.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cottet, Georges-Henri, Emmanuel Maitre e Thomas Milcent. "Eulerian formulation and level set models for incompressible fluid-structure interaction". ESAIM: Mathematical Modelling and Numerical Analysis 42, n.º 3 (3 de abril de 2008): 471–92. http://dx.doi.org/10.1051/m2an:2008013.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Desjardins, B., e M. J. Esteban. "On Weak Solutions for Fluid‐Rigid Structure Interaction: Compressible and Incompressible Models". Communications in Partial Differential Equations 25, n.º 7-8 (janeiro de 1999): 263–85. http://dx.doi.org/10.1080/03605300008821553.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Colciago, C. M., S. Deparis e A. Quarteroni. "Comparisons between reduced order models and full 3D models for fluid–structure interaction problems in haemodynamics". Journal of Computational and Applied Mathematics 265 (agosto de 2014): 120–38. http://dx.doi.org/10.1016/j.cam.2013.09.049.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Fluid-structure interaction – Mathematical models"

Taylor, Richard. "Finite element modelling of three dimensional fluid-structure interaction". Thesis, Swansea University, 2013. https://cronfa.swan.ac.uk/Record/cronfa42308.

Texto completo da fonte

Resumo:

This work is focused on the numerical modelling of fluid-structure interaction in three dimensions. Both internal and external laminar flow around flexible bodies are considered. The fluid flow simulated is based on the incompressible Navier-Stokes equations and the general focus is on laminar Newtonian flow. The streamline upwind/ pressure stabilising Petrov-Galerkin (SUPG/PSPG) method is employed to achieve a stable low order finite element discretisation of the fluid, while the solid is discretised spatially by a standard Galerkin finite element approach. The behavior of the solid is governed by Neo-Hooke elasticity. For temporal discretisation the discrete implicit generalised-alpha method is employed for both the fluid and the solid domains. The motion of the fluid mesh is solved using an arbitrary Lagrangian-Eulerian (ALE) scheme employing a nonlinear pseudo-elastic mesh update method. The fluid-solid interface is modelled using a finite element interpolation method that allows for non-matching meshes and satisfies the required conservation laws. The resulting sets of fully implicit strongly coupled nonlinear equations are then decomposed into a general framework consisting of fluid, interface and solid domains. These equations are then solved using different solution techniques consisting of strongly coupled monolithic Newton and block Gauss-Seidel methods as well as a weakly coupled novel staggered scheme. These solvers are employed to solve a number of three dimensional numerical examples consisting of: External flow: o a soft elastic beam fixed at both ends o a thin cantilever plate.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lemmon, Jack David Jr. "Three-dimensional computational modeling of fluid-structure interaction : study of diastolic function in a thin-walled left heart model". Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/15912.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hong, Say Yenh. "Fluid structure interaction modeling of pulsatile blood flow in serial pulmonary artery stenoses". Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=112571.

Texto completo da fonte

Resumo:

Motivated by the physiological phenomena of collapse and flow limitation for a serial pulmonary artery stenosis, we investigated the three-dimensional influence of spatial configuration on the wall motion and hemodynamic. Our numerical study focused on the effect of two geometrical parameters: the relative distance and the angular orientation between the two stenoses. The collapse of a compliant arterial stenosis may cause flow choking, which would limit the flow reserve to major vital vascular beds such as the lungs, potentially leading to a lethal ventilation-perfusion mismatch. Flow through a stenotic vessel is known to produce flow separation downstream of the throat. The eccentricity of a stenosis leads to asymmetric flow where the high velocity jets impinge on the sidewall, thereby inducing significant dissipation. The additional viscous dissipation causes a higher pressure drop for a flow through a stenotic vessel, than in a straight compliant vessel. It is likely that some particular morphology would have a higher vulnerability to the fluid induced instability of buckling (divergence), under physiological pulsatile flow. It was found that fluid pressure distribution have substantial implication for the downstream wall motion, under conditions of strong coupling between nonlinear vessel geometries, and their corresponding asymmetric flow. The three-dimensional fluid structure interaction problem is solved numerically by a finite element method based on the Arbitrary Lagrangian Eulerian formulation, a natural approach to deal with the moving interface between the flow and vessel. The findings of this investigation reveal that the closeness between stenoses is a substantial indication of wall collapse at the downstream end. Moreover, the results suggest a close link between the initial angular orientation of the distal stenosis (i.e. the constriction direction) and the subsequent wall motion at the downstream end. For cases showing evidence of preferential direction of wall motion, it was found that the constricted side underwent greater cumulative displacement than the straight side, suggestive of significant wall collapse.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Obando, Vallejos Benjamin. "Mathematical models for the study of granular fluids". Thesis, Université de Lorraine, 2018. http://www.theses.fr/2018LORR0274/document.

Texto completo da fonte

Resumo:

Cette thèse vise à obtenir et à développer des modèles mathématiques pour comprendre certains aspects de la dynamique des fluides granulaires hétérogènes. Plus précisément, le résultat attendu consiste à développer trois modèles. Nous supposons dans un premier temps que la dynamique du matériau granulaire est modélisée à l’aide d’une approche fondée sur la théorie du mélange. D’autre part, pour les deux modèles restant, nous considérons que le fluide granulaire est modélisé à l’aide d’une approche multiphase associant des structures et des fluides rigides. Plus exactement : • Dans le premier modèle, nous avons obtenu un ensemble d’équations basées sur la théorie du mélange en utilisant des outils d’homogénéisation et une procédure thermodynamique. Ces équations reflètent deux propriétés essentielles des fluides granulaires : la nature visqueuse du fluide interstitiel et un comportement de type Coulomb de la composante granulaire. Avec nos équations, nous étudions le problème de Couette entre deux cylindres infinis d’un écoulement hétérogène granulaire dense, composé d’un fluide newtonien et d’une composante solide. • Dans le deuxième modèle, nous considérons le mouvement d’un corps rigide dans un matériau viscoplastique. Les équations 3D de Bingham modélisent ce matériau et les lois de Newton régissent le déplacement du corps rigide. Notre résultat principal est d’établir l’existence d’une solution faible pour le système correspondant. • Dans le troisième modèle, nous considérons le mouvement d’un corps rigide conducteur thermique parfait dans un fluide newtonien conducteur de la chaleur. Les équations 3D de Fourier-Navier-Stokes modélisent le fluide, tandis que les lois de Newton et l’équilibre de l’énergie interne modélisent le déplacement du corps rigide. Notre principal objectif dans cette partie est de prouver l’existence d’une solution faible pour le système correspondant. La formulation faible est composée de l’équilibre entre la quantité du mouvement et l’équation de l’énergie totale, qui inclut la pression du fluide, et implique une limite libre due au mouvement du corps rigide. Pour obtenir une pression intégrable, nous considérons une condition au limite de glissement de Navier pour la limite extérieure et l’interface mutuelle
This Ph.D. thesis aims to obtain and to develop some mathematical models to understand some aspects of the dynamics of heterogeneous granular fluids. More precisely, the expected result is to develop three models, one where the dynamics of the granular material is modeled using a mixture theory approach, and the other two, where we consider the granular fluid is modeled using a multiphase approach involving rigid structures and fluids. More precisely : • In the first model, we obtained a set of equations based on the mixture theory using homogenization tools and a thermodynamic procedure. These equations reflect two essential properties of granular fluids : the viscous nature of the interstitial fluid and a Coulomb-type of behavior of the granular component. With our equations, we study the problem of a dense granular heterogeneous flow, composed by a Newtonian fluid and a solid component in the setting of the Couette flow between two infinite cylinders. • In the second model, we consider the motion of a rigid body in a viscoplastic material. The 3D Bingham equations model this material, and the Newton laws govern the displacement of the rigid body. Our main result is the existence of a weak solution for the corresponding system. • In the third model, we consider the motion of a perfect heat conductor rigid body in a heat conducting Newtonian fluid. The 3D Fourier-Navier-Stokes equations model the fluid, and the Newton laws and the balance of internal energy model the rigid body. Our main result is the existence of a weak solution for the corresponding system. The weak formulation is composed by the balance of momentum and the balance of total energy equation which includes the pressure of the fluid, and it involves a free boundary (due to the motion of the rigid body). To obtain an integrable pressure, we consider a Navier slip boundary condition for the outer boundary and the mutual interface

Estilos ABNT, Harvard, Vancouver, APA, etc.

Romanel, Celso 1952. "DYNAMIC SOIL-STRUCTURE INTERACTION IN A LAYERED MEDIUM". Thesis, The University of Arizona, 1987. http://hdl.handle.net/10150/276511.

Texto completo da fonte

Resumo:

The most popular method in dynamic soil-structure interaction analysis is the finite element method. The versatility in problems involving different materials and complex geometries is its main advantage, yet FEM can not simulate unbounded domains completely. A hybrid method is proposed in this research, which models the near field (structure and surrounding soil) by finite elements and the far field by a continuum approach. The system is excited by monochromatic body waves (P and SV) propagating with oblique incidence and harmonic time dependence. The far field problem is solved using Thomson-Haskell formulation associated with the delta matrix technique. The soil profile does not contain any soft layer and the layers are assumed to be linearly elastic, isotropic, homogeneous and perfectly bonded at the interfaces. Two-dimensional (in-plane) formulation is considered and the analysis is performed on both k- and o-planes through time and spatial Fourier transforms of the field equations and boundary conditions. (Abstract shortened with permission of author.)

Estilos ABNT, Harvard, Vancouver, APA, etc.

Jones, Piet. "Structure learning of gene interaction networks". Thesis, Stellenbosch : Stellenbosch University, 2014. http://hdl.handle.net/10019.1/86650.

Texto completo da fonte

Resumo:

Thesis (MSc)--Stellenbosch University, 2014.
ENGLISH ABSTRACT: There is an ever increasing wealth of information that is being generated regarding biological systems, in particular information on the interactions and dependencies of genes and their regulatory process. It is thus important to be able to attach functional understanding to this wealth of information. Mathematics can potentially provide the tools needed to generate the necessary abstractions to model the complex system of gene interaction. Here the problem of uncovering gene interactions is cast in several contexts, namely uncovering gene interaction patterns using statistical dependence, cooccurrence as well as feature enrichment. Several techniques have been proposed in the past to solve these, with various levels of success. Techniques have ranged from supervised learning, clustering analysis, boolean networks to dynamical Bayesian models and complex system of di erential equations. These models attempt to navigate a high dimensional space with challenging degrees of freedom. In this work a number of approaches are applied to hypothesize a gene interaction network structure. Three di erent models are applied to real biological data to generate hypotheses on putative biological interactions. A cluster-based analysis combined with a feature enrichment detection is initially applied to a Vitis vinifera dataset, in a targetted analysis. This model bridges a disjointed set of putatively co-expressed genes based on signi cantly associated features, or experimental conditions. We then apply a cross-cluster Markov Blanket based model, on a Saccharomyces cerevisiae dataset. Here the disjointed clusters are bridged by estimating statistical dependence relationship across clusters, in an un-targetted approach. The nal model applied to the same Saccharomyces cerevisiae dataset is a non-parametric Bayesian method that detects probeset co-occurrence given a local background and inferring gene interaction based on the topological network structure resulting from gene co-occurance. In each case we gather evidence to support the biological relevance of these hypothesized interactions by investigating their relation to currently established biological knowledge. The various methods applied here appear to capture di erent aspects of gene interaction, in the datasets we applied them to. The targetted approach appears to putatively infer gene interactions based on functional similarities. The cross-cluster-analysis-based methods, appear to capture interactions within pathways. The probabilistic-co-occurrence-based method appears to generate modules of functionally related genes that are connected to potentially explain the underlying experimental dynamics.
AFRIKAANSE OPSOMMING: Daar is 'n toenemende rykdom van inligting wat gegenereer word met betrekking tot biologiese stelsels, veral inligting oor die interaksies en afhanklikheidsverhoudinge van gene asook hul regulatoriese prosesse. Dit is dus belangrik om in staat te wees om funksionele begrip te kan heg aan hierdie rykdom van inligting. Wiskunde kan moontlik die gereedskap verskaf en die nodige abstraksies bied om die komplekse sisteem van gene interaksies te modelleer. Hier is die probleem met die beraming van die interaksies tussen gene benader uit verskeie kontekste uit, soos die ontdekking van patrone in gene interaksie met behulp van statistiese afhanklikheid , mede-voorkoms asook funksie verryking. Verskeie tegnieke is in die verlede voorgestel om hierdie probleem te benader, met verskillende vlakke van sukses. Tegnieke het gewissel van toesig leer , die groepering analise, boolean netwerke, dinamiese Bayesian modelle en 'n komplekse stelsel van di erensiaalvergelykings. Hierdie modelle poog om 'n hoë dimensionele ruimte te navigeer met uitdagende grade van vryheid. In hierdie werk word 'n aantal benaderings toegepas om 'n genetiese interaksie netwerk struktuur voor te stel. Drie verskillende modelle word toegepas op werklike biologiese data met die doel om hipoteses oor vermeende biologiese interaksies te genereer. 'n Geteikende groeperings gebaseerde analise gekombineer met die opsporing van verrykte kenmerke is aanvanklik toegepas op 'n Vitis vinifera datastel. Hierdie model verbind disjunkte groepe van vermeende mede-uitgedrukte gene wat gebaseer is op beduidende verrykte kenmerke, hier eksperimentele toestande . Ons pas dan 'n tussen groepering Markov Kombers model toe, op 'n Saccharomyces cerevisiae datastel. Hier is die disjunkte groeperings ge-oorbrug deur die beraming van statistiese afhanklikheid verhoudings tussen die elemente in die afsondelike groeperings. Die nale model was ons toepas op dieselfde Saccharomyces cerevisiae datastel is 'n nie- parametriese Bayes metode wat probe stelle van mede-voorkommende gene ontdek, gegee 'n plaaslike agtergrond. Die gene interaksie is beraam op grond van die topologie van die netwerk struktuur veroorsaak deur die gesamentlike voorkoms gene. In elk van die voorgenome gevalle word ons hipotese vermoedelik ondersteun deur die beraamde gene interaksies in terme van huidige biologiese kennis na te vors. Die verskillende metodes wat hier toegepas is, modelleer verskillende aspekte van die interaksies tussen gene met betrekking tot die datastelle wat ons ondersoek het. In die geteikende benadering blyk dit asof ons vermeemde interaksies beraam gebaseer op die ooreenkoms van biologiese funksies. Waar die a eide gene interaksies moontlik gebaseer kan wees op funksionele ooreenkomste tussen die verskeie gene. In die analise gebaseer op die tussen modelering van gene groepe, blyk dit asof die verhouding van gene in bekende biologiese substelsels gemodelleer word. Dit blyk of die model gebaseer op die gesamentlike voorkoms van gene die verband tussen groepe van funksionele verbonde gene modelleer om die onderliggende dinamiese eienskappe van die experiment te verduidelik.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chin, David 1982. "Wall shear patterns of a 50% asymmetric stenosis model using photochromic molecular flow visualization". Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=111613.

Texto completo da fonte

Resumo:

Photochromic Molecular Flow Visualization is an in vitro, experimental technique that uses high speed image acquisition combined with an ultraviolet laser to capture instantaneous flow profiles. It is particularly adept at measuring near wall velocities which are necessary for accurate wall shear rate measurements. This thesis describes the implementation and validation of the technique at McGill. The system was used to investigate the wall shear rate patterns in an idealized 50% asymmetric stenosis model under steady flow for Reynolds numbers 206, 99 and 50. A large recirculation zone with flow reattachment was seen downstream of the stenosis with maximum shear values occurring slightly upstream of peak stenosis for Reynolds number 206. This information is vital to ongoing dynamic cell culture experiments aimed at understanding the progression of atherosclerosis.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Magal, Rithvik. "Development and validation of a mathematical model for a monotube automotive damper". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021. http://amslaurea.unibo.it/22951/.

Texto completo da fonte

Resumo:

Automotive dampers involve complex flow physics that cannot be fully described by analytical models derived from first principles. Therefore, the development of a mathematical model based on semi-empirical laws that accurately describe the influence of each of the many design features would greatly help the design and optimization of automotive dampers. This thesis aims to develop a computationally efficient mathematical model capable to predicting damper performance with reasonable accuracy. Lumped parameter mathematical models were developed and implemented using the MATLAB and Simulink environments. In order to solve for the structural dynamics of the shim stack, a force method based analytical model was developed. In order to solve for the internal flow field, fluid structure interaction simulations were necessitated due to the inherent coupling of fluid and structural dynamics. Fluid-Structure Interaction (FSI) simulations were attempted using an open source setup consisting of OpenFOAM and CalculiX coupled by the preCICE coupling library. Coupled simulations on a trial simplified geometry produced physically consistent results. FSI simulations could not be performed on the real geometry due to lack of time and computational resources. The discharge coefficients were modelled as a linear function on the basis of CFD simulations perfomed on outputs from the force method model. In order to validate the MATLAB mathematical model, experiments were carried out on a test automotive damper on a suspension dynamometer. The model showed good agreement in with experimental data at low bleed valve openings. The model accuracy was observed decrease for larger bleed valve openings due to unavailability of accurate model coefficients.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Romanel, Celso. "A global-local approach for dynamic soil-structure interaction analysis of deeply embedded structures in a layered medium". Diss., The University of Arizona, 1989. http://hdl.handle.net/10150/184762.

Texto completo da fonte

Resumo:

The most popular method for dynamic soil-structure interaction analysis is the finite element method. The versatility in problems involving different materials and complex geometries is its main advantage, yet the FEM can not simulate unbounded domains completely. Several schemes have been proposed to overcome this shortcoming, such as the use of either imperfect or perfect transmitting boundaries, infinite elements and hybrid techniques. However, most of them were derived on the assumption that the soil mass can be represented as a homogeneous material despite the fact that stratified soil deposits are a common occurrence in nature. A hybrid method is proposed in this research for soil-structure interaction analysis in the frequency domain involving a multilayered linear elastic half-space. The near field region (structure and a portion of soil surrounding it) is modeled by finite elements while the far field formulation is obtained through the classical wave propagation theory based on the assumption that the actual scattered wave fields can be represented by a set of line sources. Traction reciprocity between the two regions is satisfied exactly, while the displacement continuity across the common interface is enforced in a least-squares sense. The two-dimensional system is excited by harmonic body waves (P and SV) propagating with oblique incidence. The structure can be considered either on the surface or deeply embedded in the multilayered half-space. Analytic solutions for the far field domain is obtained through the combined response of four simple problems that take into account the overall effects of the incident, reflected and scattered wave fields. The delta matrix technique is employed in order to eliminate the loss of precision problem associated with the Thomson-Haskell matrix method in its original form. Special numerical schemes are used to transform the solution from the κ- into the ω-plane due to the presence of poles on the path of integration. The few numerical examples studied in this research validate the proposed hybrid technique, but the relatively high computational cost required for evaluation of the Green's functions is still a serious drawback. Some suggestions are made to minimize the problem as well as to extend this technique to cases involving material attenuation and forced vibrations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ruckman, Christopher E. "A regression-based approach for simulating feedfoward active noise control, with application to fluid-structure interaction problems". Diss., This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06062008-170941/.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Fluid-structure interaction – Mathematical models"

Fluid structure interaction: Applied numerical methods. Chichester: Wiley, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wang, Xiaodong Sheldon. Fundamentals of fluid-solid interactions: Analytical and computational approaches. Amsterdam: Elsevier, 2008.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Journées numériques de Besançon (1992 Les Moussières, France). Computational methods for fluid-structure interaction: Proceedings of the Journées numériques de Besançon, 1992. Editado por Crolet J. M e Ohayon R. Harlow: Longman Scientific & Technical, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kolář, Vladimír. Modelling of soil-structure interaction. Amsterdam: Elsevier, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kolář, Vladimír. Modelling of soil-structure interaction. Amsterdam: Elsevier, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kolář, Vladimír. Studie nového modelu podloží staveb. Praha: Academia, nakl. Československé akademie věd, 1986.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dłużewski, Janusz Maciej. Numerical modelling of soil-structure interactions in consolidation problems. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

International, Workshop on Physical Modelling of Flow and Dispersion Phenomena (2003 Prato Italy). Proceedings of PHYSMOD2003: International Workshop on Physical Modelling of Flow and Dispersion phenomena, 3-5 September 2003, Prato, Italy. Firenze: Firenze University Press, 2003.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Leenders, Roger Th A. J. Structure and influence: Statistical models for the dynamics of actor attributes, network structure, and their interdependence. Amsterdam: Thesis Publishers, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kuramoto, Y. Dynamics of one-dimensional quantum systems: Inverse-square interaction models. Cambridge, UK: Cambridge University Press, 2009.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Fluid-structure interaction – Mathematical models"

Bodnár, Tomáš, Antonio Fasano e Adélia Sequeira. "Mathematical Models for Blood Coagulation". In Fluid-Structure Interaction and Biomedical Applications, 483–569. Basel: Springer Basel, 2014. http://dx.doi.org/10.1007/978-3-0348-0822-4_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kaltenbacher, Manfred, e Stefan Schoder. "Physical Models for Flow: Acoustic Interaction". In Advances in Mathematical Fluid Mechanics, 265–353. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67845-6_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Triggiani, Roberto. "Linear parabolic-hyperbolic fluid-structure interaction models. The case of static interface". In Mathematical Theory of Evolutionary Fluid-Flow Structure Interactions, 53–171. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92783-1_2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bukal, Mario, e Boris Muha. "A Review on Rigorous Derivation of Reduced Models for Fluid–Structure Interaction Systems". In Advances in Mathematical Fluid Mechanics, 203–37. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-68144-9_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Maday, Yvon. "Analysis of coupled models for fluid-structure interaction of internal flows". In Cardiovascular Mathematics, 279–306. Milano: Springer Milan, 2009. http://dx.doi.org/10.1007/978-88-470-1152-6_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Avalos, George, e Francesca Bucci. "Exponential Decay Properties of a Mathematical Model for a Certain Fluid-Structure Interaction". In Springer INdAM Series, 49–78. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-11406-4_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bhattacharya, Paritosh, Susmita Paul e K. S. Choudhury. "Analysis on Food Web Structure, Interaction, Strength and Stability of Different Mathematical Models of Prey and Predator". In Lecture Notes in Electrical Engineering, 207–17. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-1817-3_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kukavica, Igor, e Amjad Tuffaha. "An introduction to a fluid-structure model". In Mathematical Theory of Evolutionary Fluid-Flow Structure Interactions, 1–52. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92783-1_1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Čanić, Sunčica. "Fluid-Structure Interaction with Incompressible Fluids". In Progress in Mathematical Fluid Dynamics, 15–87. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-54899-5_2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hasnedlová-Prokopová, J., M. Feistauer, A. Kosík e V. Kučera. "Two Dimensional Compressible Fluid-Structure Interaction Model Using DGFEM". In Numerical Mathematics and Advanced Applications 2011, 361–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33134-3_39.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Fluid-structure interaction – Mathematical models"

Elliott, Novak S. J. "Cerebrospinal Fluid-Structure Interactions: The Development of Mathematical Models Accessible to Clinicians". In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-29096.

Texto completo da fonte

Resumo:

Physical scientists work with clinicians on biomechanical problems, yet the predictive capabilities of mathematical models often remain elusive to clinical collaborators. This is due to both conceptual differences in the research methodologies of each discipline, and the perceived complexity of even simple models. This limits expert medical input, affecting the applicability of the results. Moreover, a lack of understanding undermines the medical practitioner’s confidence in modeling predictions, hampering its clinical application. In this paper we consider the disease syringomyelia, which involves the fluid-structure interaction of pressure vessels and pipes, as a paradigm of the nexus between the modeling approaches of physical scientists and clinicians. The observations made are broadly applicable to cross-disciplinary research between engineers and non-technical specialists, such as may occur in academic-industrial collaborations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hamadiche, Mahmoud. "Fluid and Structure Interaction in Cochlea’s Similar Geometry". In ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-30019.

Texto completo da fonte

Resumo:

A non linear mathematical model addressing the passive mechanism of the cochlea is proposed in this work. In this respect, the interaction between the basilar membrane seen as an elastic solid and fluids in both scala vestibuli and tympani is developed. Via the fluid/solid interface, a full fluid/solid interaction is taking into account. Furthermore a significant improvement of the existing models has been made in both fluid flow modelling and solid modelling. In the present paper, the flow is three dimensional and the solid is non homogeneous two dimensional membrane where the material parameters depend only on the axial distance. The problem formulation leads to a system of non linear partial differential equations. Solution of the linearized system of partial differential equations of the proposed approach is presented. The numerical results obvious a lower and upper limits of the cochlea resonance frequency versus the material parameters of the basilar membrane. It is shown that a monochromatic acoustic wave energises only a portion of the basilar membrane and the location of the excited portion depends on the frequency of the incident acoustic wave. Those results explain the ability of the cochlea in deciphering the frequency of sound with high resolution in striking similarity with the known experimental results. The mathematical model shows that the excited strip of the basilar membrane by a monochromatic acoustic wave is very small when a transverse wave exists in the basilar membrane. Thus, a transverse wave improves highly the resolution of the cochlea in deciphering the high frequency of the incident acoustic wave.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Liang, Yue, Jiansheng Chen e Liang Chen. "Mathematical Model for Piping Erosion Based on Fluid-Solid Interaction and Soils Structure". In GeoHunan International Conference 2011. Reston, VA: American Society of Civil Engineers, 2011. http://dx.doi.org/10.1061/47628(407)14.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ebna Hai, Bhuiyan Shameem Mahmood, e Markus Bause. "Adaptive Multigrid Methods for Extended Fluid-Structure Interaction (eXFSI) Problem: Part I — Mathematical Modelling". In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53265.

Texto completo da fonte

Resumo:

This contribution is the first part of three papers on Adaptive Multigrid Methods for eXtended Fluid-Structure Interaction (eXFSI) Problem, where we introduce a monolithic variational formulation and solution techniques. In a monolithic nonlinear fluid-structure interaction (FSI), the fluid and structure models are formulated in different coordinate systems. This makes the FSI setup of a common variational description difficult and challenging. This article presents the state-of-the-art of recent developments in the finite element approximation of FSI problem based on monolithic variational formulation in the well-established arbitrary Lagrangian Eulerian (ALE) framework. This research will focus on the newly developed mathematical model of a new FSI problem which is called eXtended Fluid-Structure Interaction (eXFSI) problem in ALE framework. This model is used to design an on-live Structural Health Monitoring (SHM) system in order to determine the wave propagation in moving domains and optimum locations for SHM sensors. eXFSI is strongly coupled problem of typical FSI with a wave propagation problem on the fluid-structure interface, where wave propagation problems automatically adopted the boundary conditions from of the typical FSI problem at each time step. The ALE approach provides a simple, but powerful procedure to couple fluid flows with solid deformations by a monolithic solution algorithm. In such a setting, the fluid equations are transformed to a fixed reference configuration via the ALE mapping. The goal of this work is the development of concepts for the efficient numerical solution of eXFSI problem, the analysis of various fluid-mesh motion techniques and comparison of different second-order time-stepping schemes. This work consists of the investigation of different time stepping scheme formulations for a nonlinear FSI problem coupling the acoustic/elastic wave propagation on the fluid-structure interface. Temporal discretization is based on finite differences and is formulated as an one step-θ scheme; from which we can consider the following particular cases: the implicit Euler, Crank-Nicolson, shifted Crank-Nicolson and the Fractional-Step-θ schemes. The nonlinear problem is solved with Newton’s method whereas the spatial discretization is done with a Galerkin finite element scheme. To control computational costs we apply a simplified version of a posteriori error estimation using the dual weighted residual (DWR) method. This method is used for the mesh adaptation during the computation. The implementation is accomplished via the software library package DOpElib and deal.II for the computation of different eXFSI configurations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Neiland, V. "Mathematical models of steady and unsteady flows with a strong interaction of non-vortex and vortex flows". In Fluid Dynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-1979.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ebna Hai, Bhuiyan Shameem Mahmood, Markus Bause e Paul Kuberry. "Finite Element Approximation of the Extended Fluid-Structure Interaction (eXFSI) Problem". In ASME 2016 Fluids Engineering Division Summer Meeting collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/fedsm2016-7506.

Texto completo da fonte

Resumo:

This contribution is the second part of three papers on Adaptive Multigrid Methods for the eXtended Fluid-Structure Interaction (eXFSI) Problem, where we introduce a monolithic variational formulation and solution techniques. To the best of our knowledge, such a model is new in the literature. This model is used to design an on-line structural health monitoring (SHM) system in order to determine the coupled acoustic and elastic wave propagation in moving domains and optimum locations for SHM sensors. In a monolithic nonlinear fluid-structure interaction (FSI), the fluid and structure models are formulated in different coordinate systems. This makes the FSI setup of a common variational description difficult and challenging. This article presents the state-of-the-art in the finite element approximation of FSI problem based on monolithic variational formulation in the well-established arbitrary Lagrangian Eulerian (ALE) framework. This research focuses on the newly developed mathematical model of a new FSI problem, which is referred to as extended Fluid-Structure Interaction (eXFSI) problem in the ALE framework. The eXFSI is a strongly coupled problem of typical FSI with a coupled wave propagation problem on the fluid-solid interface (WpFSI). The WpFSI is a strongly coupled problem of acoustic and elastic wave equations, where wave propagation problems automatically adopts the boundary conditions from the FSI problem at each time step. The ALE approach provides a simple but powerful procedure to couple solid deformations with fluid flows by a monolithic solution algorithm. In such a setting, the fluid problems are transformed to a fixed reference configuration by the ALE mapping. The goal of this work is the development of concepts for the efficient numerical solution of eXFSI problem, the analysis of various fluid-solid mesh motion techniques and comparison of different second-order time-stepping schemes. This work consists of the investigation of different time stepping scheme formulations for a nonlinear FSI problem coupling the acoustic/elastic wave propagation on the fluid-structure interface. Temporal discretization is based on finite differences and is formulated as a one step-θ scheme, from which we can consider the following particular cases: the implicit Euler, Crank-Nicolson, shifted Crank-Nicolson and the Fractional-Step-θ schemes. The nonlinear problem is solved with a Newton-like method where the discretization is done with a Galerkin finite element scheme. The implementation is accomplished via the software library package DOpElib based on the deal.II finite element library for the computation of different eXFSI configurations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Temis, Joury M., Alexey V. Selivanov e Ivan J. Dzeva. "Finger Seal Design Based on Fluid-Solid Interaction Model". In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-95701.

Texto completo da fonte

Resumo:

Multidisciplinary mathematical simulation technique is developed for static and dynamic analyses of a high-efficient finger seal. It comprises gas flow simulation and stress-deformed analysis of compliant fingers based on simplified models and seal performance evaluation by two-way fluid-solid interaction coupling. Computation time for developed fast models is significantly less than for time-consuming traditional numerical 3D approaches meanwhile the accuracy of the simplified models is sufficient for preliminary investigation of finger seal design features. The developed models allow to introduce the simple iterative algorithm to solve the inverse problem of mathematical simulation and to design the finger seal, satisfying the specified requirements for the radial displacements of the fingers. Initial dynamic analysis is performed on the basis of equivalent one-mass model allowing to estimate finger response to the rotor deflections.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ebna Hai, Bhuiyan Shameem Mahmood, e Markus Bause. "Numerical Modeling and Approximation of the Coupling Lamb Wave Propagation With Fluid-Structure Interaction Problem". In ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87448.

Texto completo da fonte

Resumo:

So far, mathematical modelling of Lamb wave propagation under fluid-structure interaction (FSI) was limited to the case of rigid structure. We extend this concept to account for structural dynamics. Thereby, we provide a model that is suitable for the structural health monitoring (SHM) during the operation of the structure. The model we develop is referred to as the “eXtended Fluid-Structure Interaction” (eXFSI) problem, which is a one-directional coupling of typical FSI problem with an ultrasonic wave propagation in fluid-solid and their interface (WpFSI). Here, the strongly coupled problem of acoustic & elastic wave equations is denoted by WpFSI. Next, we explore the approach to the efficient numerical solution of the problem. We use a combination of Finite Element and Finite Difference methods and employ a dual-loop algorithm to balance the computational cost and quality of the numerical solution. To facilitate our solution algorithm, we rely upon the software library package DOpElib.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Rosetti, Guilherme Feitosa, Guilherme Vaz e André Luís Condino Fujarra. "On the Effects of Turbulence Modeling on the Fluid-Structure Interaction of a Rigid Cylinder". In ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/omae2016-54989.

Texto completo da fonte

Resumo:

The cylinder flow is a canonical problem for Computational Fluid Dynamics (CFD), as it can display several of the most relevant issues for a wide class of flows, such as boundary layer separation, vortex shedding, flow instabilities, laminar-turbulent transition and others. Several applications also display these features justifying the amount of energy invested in studying this problem in a wide range of Reynolds numbers. The Unsteady Reynolds Averaged Navier Stokes (URANS) equations combined with simplifying assumptions for turbulence have been shown inappropriate for the captive cylinder flow in an important range of Reynolds numbers. For that reason, recent improvements in turbulence modeling has been one of the most important lines of research within that issue, aiming at better prediction of flow and loads, mainly targeting the three-dimensional effects and laminar-turbulent transition, which are so important for blunt bodies. In contrast, a much smaller amount of work is observed concerning the investigation of turbulent effects when the cylinder moves with driven or free motions. Evidently, larger understanding of the contribution of turbulence in those situations can lead to more precise mathematical and numerical modeling of the flow around a moving cylinder. In this paper, we present CFD calculations in a range of moderate Reynolds numbers with different turbulence models and considering a cylinder in captive condition, in driven and in free motions. The results corroborate an intuitive notion that the inertial effects indeed play very important role in determining loads and motions. The flow also seems to adapt to the motions in such a way that vortices are more correlated and less influenced by turbulence effects. Due to good comparison of the numerical and experimental results for the moving-cylinder cases, it is observed that the choice of turbulence model for driven and free motions calculations is markedly less decisive than for the captive cylinder case.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Routhu, Manoha, e A. G. Agwu Nnanna. "Mathematical Formulation of Transport Phenomena in Buoyancy-Driven Nanofluids". In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13268.

Texto completo da fonte

Resumo:

This paper is concerned with the interaction between nanoparticles in buoyancy-driven flow. The nanoparticles suspended in a base liquid are driven to stochastic motion by rapidly fluctuating forces, this phenomenon is termed as 'thermal dispersion' resulting from the dissociation of the ambient solvent molecules taking place within the mixture. Such thermal dispersion is esteemed to play an aggressive role in the increase of energy exchange rates in the fluid. Under the influence of these forces, the suspended nanoparticles may experience interparticle collision and attachment of the colliding particles and form aggregates. The theme of the present work is to understand the thermal transport phenomena of buoyancy-driven nanoparticles as well as to analyze the enhancement mechanism of energy transport from the nanoparticles. By considering physical properties of both the base fluid and the nanoparticles, as well as the structure of the nanoparticles and aggregates, a mathematical model has been developed to predict the axial velocity and temperature of both the fluid and the nanoparticle arbitrarily moving inside the system. The model proposed is a two-equation model, one for the fluid and the other for the nanoparticles, which are later combined together to form a non-homogeneous equation in x- and y-direction respectively. The solutions to these equations are presented in this work.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!