Bibliografias temáticas / Flue gases Purification

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências

Literatura científica selecionada sobre o tema "Flue gases Purification"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 19 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Flue gases Purification".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Flue gases Purification"

Bushmanov, V. M., V. E. Kogut, Ie D. Butovskyi, M. G. Khmelnyuk e A. V. Zimin. "Process modeling of purification of flue gases". Petroleum Science and Technology 36, n.º 3 (29 de dezembro de 2017): 200–207. http://dx.doi.org/10.1080/10916466.2017.1409239.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Herden, H., G. Mayer-Schwinning e G. Boening. "Purification of incinerator flue gases by adsorption". Zeolites 17, n.º 5-6 (novembro de 1996): 525. http://dx.doi.org/10.1016/0144-2449(96)89009-9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Marczak-Grzesik, Marta, Stanisław Budzyń, Barbara Tora, Szymon Szufa, Krzysztof Kogut e Piotr Burmistrz. "Low-Cost Organic Adsorbents for Elemental Mercury Removal from Lignite Flue Gas". Energies 14, n.º 8 (13 de abril de 2021): 2174. http://dx.doi.org/10.3390/en14082174.

Texto completo da fonte

Resumo:

The research presented by the authors in this paper focused on understanding the behavior of mercury during coal combustion and flue gas purification operations. The goal was to determine the flue gas temperature on the mercury emissions limits for the combustion of lignites in the energy sector. The authors examined the process of sorption of mercury from flue gases using fine-grained organic materials. The main objectives of this study were to recommend a low-cost organic adsorbent such as coke dust (CD), corn straw char (CS-400), brominated corn straw char (CS-400-Br), rubber char (RC-600) or granulated rubber char (GRC-600) to efficiently substitute expensive dust-sized activated carbon. The study covered combustion of lignite from a Polish field. The experiment was conducted at temperatures reflecting conditions inside a flue gas purification installation. One of the tested sorbents—tire-derived rubber char that was obtained by pyrolysis—exhibited good potential for Hg0 into Hg2+ oxidation, resulting in enhanced mercury removal from the flue. The char characterization increased elevated bromine content (mercury oxidizing agent) in comparison to the other selected adsorbents. This paper presents the results of laboratory tests of mercury sorption from the flue gases at temperatures of 95, 125, 155 and 185 °C. The average mercury content in Polish lignite was 465 μg·kg−1. The concentration of mercury in flue gases emitted into the atmosphere was 17.8 µg·m−3. The study analyzed five low-cost sorbents with the average achieved efficiency of mercury removal from 18.3% to 96.1% for lignite combustion depending on the flue gas temperature.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Shepelev, I. I., O. V. Pilyaeva, E. N. Eskova, E. V. Kiryushin e I. S. Stiglits. "Increase in Efficiency of Processes of Purification of Gases of Aluminous Production". Ecology and Industry of Russia 23, n.º 11 (13 de novembro de 2019): 10–14. http://dx.doi.org/10.18412/1816-0395-2019-11-10-14.

Texto completo da fonte

Resumo:

Technical actions for decrease in harmful effects on the surrounding environment from the rotating furnaces of agglomeration of JSC RUSAL Achinskare offered. Additional technical solution on tertiary treatment of flue gases of the furnace of agglomeration in a scrubber electric precipitators and the direction of purified gases on repartition of carbonization of the aluminous shop is developed. the providing decrease in harmful emissions in the atmosphere to the level of maximum-permissible concentration. The carried-out trial tests of the offered technology confirmed that except effective purification of flue gases of furnaces of agglomeration of inorganic dust and carbon dioxide the high extent of decomposition of alyuminatny solution necessary for technology of receiving alumina is provided.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hu, Zhongjie, Heng Zhou, Weili Zhang e Shengli Wu. "The Influence of the Porous Structure of Activated Coke for the Treatment of Gases from Coal Combustion on Its Mechanical Strength". Processes 8, n.º 8 (28 de julho de 2020): 900. http://dx.doi.org/10.3390/pr8080900.

Texto completo da fonte

Resumo:

This study investigated influences of the open/close states of pores and porosity distribution of activated coke on the mechanical strength of common activated coke for the purification of coal-fired flue gas by analyzing pore structure, abrasive resistance, and compression strengths of 9 types of desulfurization and denitration activated cokes. Research conclusions are conducive to disclosing the influences of porosity characteristics of activated coke for the purification of coal-fired flue gas on mechanical strength, decreasing the physical consumption of activated coke in the recycling of flue gas purification systems, and lowering the purification cost of coal-fired flue gas. According to research results, pores in the ranges of 0–2 nm and 2–500 nm of activated coke are further developed after recycling using the coal-fired flue gas purification system, and the average compression strength of activated coke is about 70% of the added fresh activated coke. However, the abrasive resistance of the recycled activated coke which has a smooth surface is higher than that of the fresh activated coke. Open pores are the main cause of reduced compression strength of activated coke. Open pores in the range of 2–500 nm can destroy the compression strength of activated coke the most. The open/close states of pores cause no significant impacts on the abrasive resistance of activated coke, but pores with diameters ranging from 0–2 nm can destroy the abrasive resistance of activated coke most significantly.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ul'yanov, Boris, Tat'yana Raskulova e Mihail Fereferov. "THE OFF-GAS PURIFICATION AFTER THE CATALYTIC COMPLEX PREPARATION’S STAGE OF THE ETHYLBENZENE PRODUCTION". Scientific Papers Collection of the Angarsk State Technical University 2018, n.º 1 (4 de março de 2020): 51–54. http://dx.doi.org/10.36629/2686-7788-2018-1-51-54.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Nosyrev, M. A., R. B. Komlyashev, S. I. Ilyina e O. V. Kabanov. "Purification of Gas Emissions from Sulfur Dioxide in Industrial Plants". Ecology and Industry of Russia 22, n.º 8 (1 de agosto de 2018): 24–27. http://dx.doi.org/10.18412/1816-0395-2018-8-24-27.

Texto completo da fonte

Resumo:

The possibility of spreading technology for capturing carbon dioxide from the flue gases of industrial enterprises as well as the utilization of sulfur dioxide is considered. A comparison is made between the physicochemical properties of these gases. Based on the experimental data obtained from the capture of sulfur dioxide, it is concluded that this technology can be successfully applied for the utilization of sulfur dioxide from gas emissions from industrial enterprises.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ivanova, M. S., M. V. Vishnetskaya, I. Yu Skrepleva e K. O. Tomsky. "Catalytic Purification of Gas Emissions from Carbon Dioxide and Sulfur". Ecology and Industry of Russia 23, n.º 1 (15 de janeiro de 2019): 46–49. http://dx.doi.org/10.18412/1816-0395-2019-1-46-49.

Texto completo da fonte

Resumo:

The optimal parameters of catalytic purification of flue gases from SO2 and CO2 in trifluoroacetic acid solutions are determined. It is shown that flue gas cleaning from carbon dioxide and sulfur dioxide using trifluoroacetic acid solutions as a catalyst is carried out at room temperature and atmospheric pressure with an efficiency of 100%. The process of gas purification from sulfur dioxide and carbon dioxide is carried out in a non-aggressive medium of trifluoroacetic acid (TFA) solutions. The possibility of increasing the absorption capacity of the reaction medium by pumping the exhaust gases through trifluoroacetic acid solutions has been established. At the same time, polluting waste gases — toxic sulfur and carbon oxides — are converted into higher oligomers (oxides), and then, as a result of their interaction with water, present directly in the reaction medium — TFA aqueous solution, into the corresponding acids. The formation of trifluoroacetic acid esters to a lesser extent leads to an increase in the absorptivity of the reaction medium, a reduction in the number of regeneration stages, a simplified separation of by-products, and, consequently, a simplification of their utilization process due to the absence of the need to purify the latter from these esters.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Glazyrin, Sergey, Zhanar Aidymbayeva, Abay Dostiyarov, Mikhail Zhumagulov, Nikolay Zlatov e Velimir Strefanovic. "Study of the possibilities of integrated treatment of flue gases and waste water from coal-fired heat power plants". Thermal Science, n.º 00 (2021): 229. http://dx.doi.org/10.2298/tsci210402229g.

Texto completo da fonte

Resumo:

The results of laboratory studies carried out to identify the possibility and effectiveness of technologies for the complex recycling of components of flue gases and wastewater from thermal power plants and industrial boilers are presented. The following factors were investigated: the degree of saturation of water solutions with carbon dioxide, the efficiency of using these solutions for the regeneration of cation exchangers, the properties of regeneration solutions intended for the regeneration of cation exchange filters prepared using components of flue gases obtained from the combustion of organic fuel in the laboratory by saturating water of various compositions, the degree of saturation of condensate and waste water with components of flue gases, as well as the degree of regeneration of cation exchangers with such regeneration solutions. After research in the laboratory, a laboratory installation was created in an industrial environment to determine the properties of solutions obtained from wastewater and flue gases obtained after production processes at a power plant. The technologies were developed for the complex recycling of flue gases and waste water from thermal power plants with the production of carbon dioxide with a purity of 99.9%, technical nitrogen with a purity of 95%, special solutions for the regeneration of cation exchangers in water purification plants of industrial enterprises. The results obtained make it possible to minimize the volume of emissions into the atmosphere and the volume of waste water from thermal power plants

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gorbatyuk, S. M., P. S. Makarov e M. A. Sukhorukova. "Environmental efficiency of gas purification and ash collection in Russian mining and metallurgical industry". Izvestiya. Ferrous Metallurgy 63, n.º 6 (1 de julho de 2020): 451–57. http://dx.doi.org/10.17073/0368-0797-2020-6-451-457.

Texto completo da fonte

Resumo:

The problem of reducing emissions of sulfur dioxide from the flue gases of coal-fired TPPs is highly relevant for domestic energy in connection with the annual increase in coal production. This article analyzes statistical data in the field of coal mining, describes the current state in the field of gas purification and ash collection in the mining and metallurgical industry of the Russian Federation. To regulate pollutant emissions by stationary sources in Russia, a system of maximum permissible and temporarily agreed emissions (MPE and ENV) was introduced. The country takes part in international programs aimed at protecting the environment from the harmful effects of human activity. Despite the general dynamics of reducing air pollution in the Russian Federation, emissions from mining and metallurgical enterprises only increase. This is due to deficiencies in the technical condition and operation of dust and gas cleaning equipment at electric power enterprises. The main ones are the moral and physical deterioration of the equipment fleet, the need for reconstruction and modernization of devices. The average degree of flue gas cleaning from ash at Russian TPPs is 95.5 %, which is noticeably less than abroad. Efficiency of the gas treatment plants used does not meet modern environmental requirements. The flue gases at our TPPs are not cleaned from sulfur and nitrogen oxides; there are practically no devices for continuous monitoring of TPP emissions. The article provides the rationale for the transition of enterprises to the best available technologies (BAT) in the field of gas purification. The use of a gas conditioning system allows 30 – 40 % reduction in the amount of funds spent on the construction of electrostatic filters. In recent years, in connection with the advent of new technologies for burning coal, filters for the purification of hot gases made of ceramic materials have been created. We have analyzed the state of gas purification and ash collection in the mining and metallurgical industry of the Russian Federation and its impact on the atmosphere. An assessment of the current state of gas purification equipment at the enterprises was carried out.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Flue gases Purification"

Khunsupat, Ratayakorn. "Poly(allylamine) and derivatives for co2 capture from flue gas or ultra dilute gas streams such as ambient air". Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/44909.

Texto completo da fonte

Resumo:

Polymers rich in primary amine groups are proposed to be effective adsorbents for the reversible adsorption of CO2 from moderately dilute gas streams (10% CO2) and ultra-dilute gas streams (e.g. ambient air, 400 ppm CO2), with their performance under ultra-dilute conditions being competitive with or exceeding the state-of-the-art adsorbents based on supported poly(ethyleneimine) (PEI). The CO2 adsorption capacity (mmol CO2/g sorbent) and amine efficiency (mmol CO2/mmol amine) of linear poly(allylamine) (PAA), cross-linked poly(allylamine) prepared by post-polymerization crosslinking with epichlorohydrin (PAAEPI), and branched poly(allylamine) prepared by branching of poly(allylamine) with divinylbenzene (PAADVB) are presented here and compared with state-of-the-art adsorbents based on supported PEI, specifically branched and linear, low molecular weight PEI. Silica mesocellular foam, MCF, serves as the support material for impregnation of the amine polymers. In general, branched polymers are found to yield more effective adsorbents materials. Overall, the results of this work show that linear PAA, cross-linked PAAEPI, and branched PAADVB are promising candidates for solid adsorbents with high capacity for CO2.

Estilos ABNT, Harvard, Vancouver, APA, etc.

McHenry, Dennis John Jr. "Development of an electrochemical membrane process for removal of SOx/NOx from flue gas". Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/11698.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Crawford, Ian Stewart. "Catalytic reduction of nitric oxide by carbon monoxide or hydrogen over a Monel metal catalyst". Title page, contents and summary only, 1987. http://web4.library.adelaide.edu.au/theses/09EN/09enc899.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Livros sobre o assunto "Flue gases Purification"

Konzeption und Bewertung technischer Entsorgungswege: Dargestellt am Beispiel von Reststoffen aus der Rauchgasreinigung in Baden-Württemberg. Heidelberg: Physica-Verlag, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Tagung, VDI-Gesellschaft Technische Gebäudeausrüstung. Emissionsminderung bei Heizanlagen: Konzepte und Entwicklungen : Tagung, Köln, 11. November 1986. Düsseldorf: VDI Verlag, 1986.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

S, Noskov A., Chumachenko V. A e Parmon V. N, eds. Kataliticheskoe obezvrezhivanie otkhodi͡ashchikh gazov promyshlennykh proizvodstv. Novosibirsk: "Nauka," Sibirskoe otd-nie, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Campbell, L. M. Sourcebook, NOx control technology data: Project summary. Research Triangle Park, N.C: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hammerschmid, Rudolf. Entwicklung technisch-wirtschaftlich optimaler regionaler Entsorgungsalternativen: Dargestellt für Reststoffe aus der Rauchgasreinigung für Baden-Württemberg. Heidelberg: Physica-Verlag, 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dismukes, Edward B. Technology for the control of particulates and sulfur oxides by electrostatic techniques. Research Triangle Park, NC: U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Air Pollution Seminar (5th 1987 Buffalo, N.Y.). Solving corrosion problems in the air pollution control industry: Proceedings of the 1987 Air Pollution Seminar, October 14-16, 1987, Buffalo, New York. Houston: National Association of Corrosion Engineers, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Campbell, Lisa M. Sourcebook, NOx control technology data. Research Triangle Park, N.C: Air and Energy Engineering Research Laboratory, U.S. Environmental Protection Agency, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Glazyrin, A. I. Utilizat͡s︡ii͡a︡ komponentov dymovykh gazov teploėnergeticheskikh ustanovok. Alma-Ata: "Gylym", 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Combustion and incineration processes. 3^a ed. New York: Marcel Dekker, 2002.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Flue gases Purification"

"Pollution Control". In Environmental Toxicology, editado por Sigmund F. Zakrzewski. Oxford University Press, 2002. http://dx.doi.org/10.1093/oso/9780195148114.003.0017.

Texto completo da fonte

Resumo:

Coal is now used mainly as fuel for the production of electricity. Worldwide about 28% of commercial energy production depends on coal. In the United States it is about 31% and in some coal rich but oil poor countries such as China, Germany, Poland and the Czech Republic the figures are 73%, 56%, 95% and 86%, respectively (1). Because of the ample supply of available coal, dependence on coal as an energy source will probably remain high for some time to come. However, coal is the most polluting of all fuels; its main pollutants are sulfur dioxide and suspended particulate matter (SPM). Depending on its origin, coal contains between 1 and 2.5% or more sulfur. This sulfur comes in three forms: pyrite (FeS2), organic bound sulfur, and a very small amount of sulfates (2). Upon combustion, about 15% of the total sulfur is retained in the ashes. The rest is emitted with flue gases, mostly as SO2 but also, to a lesser extent, as SO3. This mixture is frequently referred to as SOx (2). The three basic approaches to the control of SOx emission are prepurification of coal before combustion, removal of sulfur during combustion, and purification of flue gases. The first approach, referred to as a benefication process, is based on a difference in specific gravity between coal (sp gr = 1.2–1.5) and pyrite (sp gr = 5). Although the technical arrangements may vary, in essence the procedure involves floating the crushed coal in a liquid of specific gravity between that of pure coal and that of pyrite. Coal is removed from the surface while pyrite and other minerals settle to the bottom. Coal benefication can reduce sulfur content by about 40% (2). Although gravity separation is presently the only procedure in use, research was initiated on microbial purification of coal. A research project conducted by the Institute of Gas Technology, with funding from the U.S. Department of Energy, was aimed at the development of genetically engineered bacteria capable of removing organic sulfur from coal. Inorganic sulfur can be removed by the naturally occurring bacteria Thiobacillus ferrooxidans, Thiobacillus thiooxidans, and Sulfolobus acidocaldarius (3).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Flue gases Purification"

Zhong, Zhaoping, Basheng Jin, Jixiang Lan, Changqing Dong e Hongchang Zhou. "Experimental Study of Municipal Solid Waste (MSW) Incineration and Its Flue Gas Purification". In 17th International Conference on Fluidized Bed Combustion. ASMEDC, 2003. http://dx.doi.org/10.1115/fbc2003-011.

Texto completo da fonte

Resumo:

This paper presents experimental study of fluidized absorption process for flue gas purification of co-combustion of municipal solid waste (MSW) and coal in a circulating fluidized bed Combustor (CFBC) test rig. The test rig is composed of a CFBC, coal/MSW feeding subsystem, ash cycle subsystem and flue gas purification subsystem. In the circulating fluidized bed, section area of fluidized bed is 230mm × 230mm and the freeboard is 460mm × 395mm. The total height of the test facility is 8m; height of bed and freeboard are 1.5m and 6m respectively. The preheated air enters the bed as primary air passing through distributor and provides oxygen for combustion. Six movable tubes immerged within the bed are used in adjusting the bed temperature. The cyclone separator is fixed up at the exit of chamber. The separated ashes return to chamber through the recycling feeder for decreasing the carbon content in fly ash and promoting the combustion efficiency. The flue gas from the exit of cyclone separator enters the air preheater to preheat the cold air at first, then enters the flue gas purification facility, finally be discharged into air by induced drafted fan passing through the stack. Coal is carried to a positive pressure feeding entrance by screw feeder and enters the bed. Secondary air is injected into a sealed end feeding pipe under MSW feeder, for enhancing the mixture in furnace, providing the oxygen for combustion and preventing from MSW remaining in the feeding pipe. The material of bed is silicon sand. Fluidized absorption facility for flue gas purification in MSW incineration is mainly composed of humidification system, absorption tower, flue gas reheater, fabric filter, slurry making pool, sediment pool and measurement subsystem. The temperature of flue gas from boiler by induced draft fan reduces to 120°C when flue gas enters the humidification region, which can increase the ability of acid gas absorption and prevent the slurry evaporation. When flue gas and limestone slurry enter the absorption tower, the three-phase material of gas, liquid and solid generates intense mixing and forms bubbling layer. The acid gases in flue gas are absorbed by limestone slurry, and a large amount of dusts are collected in reaction tank. Feeding oxidation air into slurry and agitating slurry simultaneously so as to promote the inner circulation of slurry and oxygenization of calcium sulphite. Flue gas passes through undulate demister which has high efficiency and low resistance, then enters fabric filter after reheating, finally be discharged into the stack by induced draft fan. The mixture of slurry and gypsum is emitted into the sediment pool through bottom and clear liquid in sediment pool returns to slurry making pool or absorption tower. The test results are as follows: the combustion efficiency is greater than 95%, the carbon content of fly ash is lower than 8%, and the loss of slag combustion is lower than 5%. When sorbent is limestone slurry, the concentration of slurry is 1%, the circulating ratio is 3, the jet rate is 5∼15m/s. The immerged depth of bubbling pipe under the slurry is 140mm. In the fluidized absorption facility for flue gas purification of MSW incineration, the desulfurization efficiency is >90%, the de-nitrification efficiency is 20∼30%, the de-chlorination efficiency is >80%, the removal efficiency of dust, heavy metal and dioxins are >99%, >98.6% and 99.35% respectively. After passing through fluidized absorption facility for flue gas purification of MSW incineration, when the concentration of O2 is 11%, the emission concentration of every components in flue gas are: SO2 is 20∼50mg/Nm3, NOx is 130∼270 mg/Nm3, HCl is 7∼12 mg/Nm3, HF is ∼8 mg/Nm3, CO2 is7∼8%, dust is 23∼67 mg/Nm3, Cr is 0.2172 mg/Nm3, Cu is 0.0454 mg/Nm3, Pb is 0.2963 mg/Nm3, Zn is 0.2074 mg/Nm3, Fe is 2.834 mg/Nm3, As is 1.112 × 10−3 mg/Nm3, Hg is 2.38 × 10−4 mg/Nm3 and dioxins is 0.1573 ng/Nm3. These emission concentrations are all lower than the Chinese emission standards. Some of them come close to the emission standards of developed country.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kogut, V. E., V. M. Bushmanov e N. V. Zhykharieva. "The filter on the basis of the ejector of the heat exchanger for purification of harmful substances from flue gases using heat exchanger as combustion gas filter". In INTERNATIONAL CONFERENCE ON SCIENCE AND APPLIED SCIENCE (ICSAS2020). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0026819.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gazzino, Marco, e Giancarlo Benelli. "Pressurised Oxy-Coal Combustion Rankine-Cycle for Future Zero Emission Power Plants: Process Design and Energy Analysis". In ASME 2008 2nd International Conference on Energy Sustainability collocated with the Heat Transfer, Fluids Engineering, and 3rd Energy Nanotechnology Conferences. ASMEDC, 2008. http://dx.doi.org/10.1115/es2008-54268.

Texto completo da fonte

Resumo:

This paper presents the process design and the energy analysis for a coal-fired power plant based on pressurised oxycoal combustion and including carbon capture technologies. A combustion technology performing a pressurised combustion of coal in an atmosphere of O2/CO2/H2O and including flue gases recycling has been selected. Combustion and steam production occur in separated equipments and the combustor’s design allows achieving high ash removal efficiency. The Rankine cycle has been chosen as the most viable thermodynamic cycle in a short-term scenario. Oxygen required by the combustion process is supplied by a cryogenic Air Separation Unit (ASU) and a double-reheat ultrasupercritical cycle is employed with main steam conditions of 250bar/605°C and reheat steam temperatures of 605°C/620°C. All choices related to thermal cycle selection and process design have been conducted upon the principle of feasibility and reliability. In order to increase net plant efficiency both sensible and latent heat is recovered from the flue gas stream before entering the purification and compression section. By operating in pressure it becomes possible to recover a larger amount of heat than in the atmospheric case. As a result, all low pressure steam bleedings and the corresponding regenerative heat exchangers can be eliminated. Process simulation is carried out in the paper and the expected efficiency is evaluated, as well as other cycle performance parameters. Since a relevant benefit may arise from the combustion of cheap coals, the impact of burning high-ash content and low ash-fusion-temperature coals is assessed. The impact of energy penalties associated to oxygen production and the benefit arising from high heat-transfer coefficients due to the increased pressure of the flue gas are deeply investigated.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!