Literatura científica selecionada sobre o tema "Films nanoporeux"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Films nanoporeux".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Films nanoporeux"
Abelow, Alexis E., Ryan J. White, Kevin W. Plaxco e Ilya Zharov. "Nanoporous silica colloidal films with molecular transport gated by aptamers responsive to small molecules". Collection of Czechoslovak Chemical Communications 76, n.º 6 (2011): 683–94. http://dx.doi.org/10.1135/cccc2011022.
Texto completo da fonteSrisuwan, Y., N. Kotsaeng, Y. Baimark, N. Narkkong e W. Simchuer. "Study on Morphology and Thermal Stability of Nanoporous Silk Fibroin Films". Advanced Materials Research 55-57 (agosto de 2008): 721–24. http://dx.doi.org/10.4028/www.scientific.net/amr.55-57.721.
Texto completo da fonteHer, Hyun Jung, Jung Min Kim, Yun Soo Lim, Jae Wan Kim, Y. J. Choi, C. J. Kang e Yong Sang Kim. "Nanoporous Titania by Embossing with PMMA Nanopoles Made from Nanoporous Alumina Template". Materials Science Forum 544-545 (maio de 2007): 1017–20. http://dx.doi.org/10.4028/www.scientific.net/msf.544-545.1017.
Texto completo da fonteLeenheer, Andrew J., Alexander Miedaner, Calvin J. Curtis, Maikel F. A. M. van Hest e David S. Ginley. "Fabrication of nanoporous titania on glass and transparent conducting oxide substrates by anodization of titanium films". Journal of Materials Research 22, n.º 3 (março de 2007): 681–87. http://dx.doi.org/10.1557/jmr.2007.0078.
Texto completo da fonteChojenka, Juliusz, Arkadiusz Zarzycki, Marcin Perzanowski, Michał Krupiński, Tamás Fodor, Kálmán Vad e Marta Marszałek. "Tuning of the Titanium Oxide Surface to Control Magnetic Properties of Thin Iron Films". Materials 16, n.º 1 (28 de dezembro de 2022): 289. http://dx.doi.org/10.3390/ma16010289.
Texto completo da fonteBenetti, Giulio, Francesco Banfi, Emanuele Cavaliere e Luca Gavioli. "Mechanical Properties of Nanoporous Metallic Ultrathin Films: A Paradigmatic Case". Nanomaterials 11, n.º 11 (18 de novembro de 2021): 3116. http://dx.doi.org/10.3390/nano11113116.
Texto completo da fonteYu, Yang-Yen, e Chang-Chung Yang. "Preparation of Nanoporous Poly(Methyl Silsesquioxanes) Films Using PS-b-P4VP as Template". Journal of Nanoscience and Nanotechnology 8, n.º 3 (1 de março de 2008): 1537–44. http://dx.doi.org/10.1166/jnn.2008.073.
Texto completo da fonteYu, Yang Yen, Wen Chen Chien e Shih Ting Chen. "Preparation of Nanoporous Mondispersed Silica Nanoparticles Films Using Poly(styrene)- Block-Poly( 2-Vinyl Pyridine) as Template". Advanced Materials Research 47-50 (junho de 2008): 646–49. http://dx.doi.org/10.4028/www.scientific.net/amr.47-50.646.
Texto completo da fonteHer, Hyun-Jung, Jung-Min Kim, C. J. Kang e Yong-Sang Kim. "Fabrication of Thin Film Titania with Nanopores, Nanopoles, and Nanopipes by Nanoporous Alumina Template". Journal of Nanoscience and Nanotechnology 8, n.º 9 (1 de setembro de 2008): 4808–12. http://dx.doi.org/10.1166/jnn.2008.ic84.
Texto completo da fonteChou, Chia-Man, Tong-You Wade Wei, Jou-May Maureen Chen, Wei-Ting Chang, Chang-Tze Ricky Yu e Vincent K. S. Hsiao. "Preparation of Nanoporous Polymer Films for Real-Time Viability Monitoring of Cells". Journal of Nanomaterials 2011 (2011): 1–6. http://dx.doi.org/10.1155/2011/436528.
Texto completo da fonteTeses / dissertações sobre o assunto "Films nanoporeux"
Cojocaru, Ludmila. "Films d’oxydes semi-conducteurs nanoporeux et nanocristallins pour dispositifs photovoltaïques hybrides". Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14630/document.
Texto completo da fonteIn the context of the development of efficient, low-cost and environmentally friendly photovoltaic devices, the synthesis of metal-oxide semiconductors such as SnO2, Zn2SnO4 and WO3 with various textures and morphologies have been developed in order to achieve nanoporous photoanodes for dye-sensitized solar cells. According to studies carried out by different characterization methods (SEM, TEM, XRD and BET), the resulting materials show interesting features for the expected application. Dye solar cells were then fabricated from photoanodes processed with these oxides and several parameters influencing their performance were optimized to improve the overall conversion efficiency. In particular, the beneficial effect of different treatments of the photoanodes (ie aqueous TiCl4 or water treatment) on the power conversion efficiency and the stability of the devices has been evidenced. Thus, state-of-the art or, even, record efficiencies were reached in the case of SnO2-based systems. These performances were then rationalized by determining the electronic and ionic processes occurring in these devices by various physical methods (threshold voltage and open-circuit photovoltage decay measurements, electrochemical impedance spectroscopy). Finally, electrodes based on WO3 and deposited on flexible substrates have shown very promising electrochromic properties, which opens up new prospects in the field of smart displays
Mauroy, Cyprien. "Films multicouches nanocristaux de cellulose/Ge-Imogolite pour l'élaboration de nouveaux matériaux nanoporeux". Thesis, Aix-Marseille, 2017. http://www.theses.fr/2017AIXM0265/document.
Texto completo da fonteIn the past decade, multilayer thin films drew the scientific community attention for their unique properties. Indeed, principally made of an association of polyelectrolytes and/or nanoparticles, of various morphologies and chemistries, they allow the design of a range of porous nanomaterials with unique optical properties, such as structural colors or anti-reflectivity. Less commonly described, thin films made of two nanoparticles of opposite charges are gaining interest since they combine the properties of the two nanoparticles used, and generate new ones through their association. In this study, multilayer coatings were formed through the association of two anisotropic oppositely charged nanorods of well-controlled aspect ratio, i.e. bio-based anionic cellulose nanocrystals (CNC) and geo-based cationic Imogolites. This study deals with the feasibility to create a bio-geo-inspired multilayer thin film based on these two nanoparticles by dipping and characterize their optical properties. Firstly, elaboration of multilayered thin films from CNC and Ge-Imogolites nanorods, were studied in comparison with reference films incorporating CNC or Imogolites with polyelectrolytes bearing opposite charges of the nanorods. Multilayered thin films were assembled by the dipping procedure and various parameters (adsorption time, ionic strength, etc.) were varied to investigate the optimal density for the film. To finish, film porosities were investigated using QCM-D, and optical properties were investigated by transmittance measurements
Pastre, Aymeric. "Élaboration d’électrodes à base de films d’or nanoporeux et conception de micro-supercondensateurs intégrés". Thesis, Lille 1, 2017. http://www.theses.fr/2017LIL10187/document.
Texto completo da fonteThe thesis work aims at the design of nanoporous gold-based all-solid state micro-supercapacitors, integrated on a silicon substrate. In a first step, we have developed a process for the formation of gold films by auto-catalytic chemical reduction. In order to enhance the adhesion of the gold film to the silicon substrate, an original seed layer was produced by a sol-gel process. It consists in a thin film of zirconium oxide (ZrO2) doped with gold nanoparticles. The porosity of these gold films was controlled by a templating method using polystyrene microspheres (Ø ≈ 20 nm). Nanoporous gold films can reach a 1.2 μm thickness in the absence of delamination. The porosity is completely interconnected and the pore size (20 nm) was chosen in order to be compatible with the used electrolyte. The method only involves wet chemistry processes and is fully compatible with conventional micro-manufacturing processes. The nanoporous gold films constituting the electrode material of the micro-supercapacitor have been structured by photolithography in the form of interdigitated combs. The impregnation of a gelled polymer electrolyte (PVA / KOH) made it possible to finalize the manufacture of the all-solid state micro-supercapacitor. Electrochemical characterizations show that the micro-device reaches a surface capacitance of 240 μF/cm² at 20 mV/s, and can endure more than 8000 cycles, while losing only 5% of its initial capacitance. These performances are comparable to those of the all-solid state integrated micro-supercapacitors reported in the literature
Wong, Ka Lun. "Incorporation des semi-conducteurs dans des matériaux nanoporeux et mise en forme de films minces". Caen, 2010. http://www.theses.fr/2010CAEN2056.
Texto completo da fonteNanosized semiconductors (NSCs) are potential materials for a variety of optoelectronic, solar photovoltaic and sensor devices. In this study, two main approaches for preparation of stable NSCs in zeolitic materials, namely the one-step synthesis (OSS) and the ion-exchange-irradiation (IEI) have been developed. The OSS approach involves direct synthesis of NSCs in hydrophobic pure silica MFI-type zeolite via co-condensation of silica source, 3-mercaptopropyl-trimethoxysilane (MPTS), metal precursor (Cd2+, Zn2+, Pb2+, Mo5+, Co2+) and tetrapropylammonium hydroxide (TPAOH). For IEI approach, metal precursors were first introduced into the as-prepared aluminosilicate zeolites (LTL, FAU and MFI- type zeolites) by ion-exchange process. The ion-exchanged zeolite suspensions in the presence of 2-mercaptoethanol are irradiated with different doses of gamma ray to facilitate the formation of nanosized metal sulfides. The NSCs trapped in the LTL channels maintain their maximum particle size in the sub-nm range, while two different populations of clusters in FAU and MFI zeolites are formed. The NSCs samples prepared by both OSS and IEI approaches are stable in air and assembled into thin films. Thus, alternative routes for preparation of stable NSCs for fabrication of new sensing, optoelectronic and photovoltaic devices are disclosed
Amyar, Hajar. "Probing the formation and the sorption response of nanoporous films by in situ optical spectroscopies". Electronic Thesis or Diss., Sorbonne université, 2023. https://accesdistant.sorbonne-universite.fr/login?url=https://theses-intra.sorbonne-universite.fr/2023SORUS204.pdf.
Texto completo da fonteNanoporous films are of great interest due to their unique properties and various applications in different fields. Characterization of these films is crucial to understanding and controlling their properties (such as pore size and distribution, surface area, porosity, and mechanical strength) and their evolution in operating conditions. In this regard, among the optical spectroscopic methods, ellipsometry, especially in situ ellipsometry is a powerful and non-destructive technique for characterizing nanoporous films. This technique is well suited to monitor the film's thickness and optical properties in different environments. This is an important tool for applications in which guest molecules are uptaken into the porosity (sensing, gas capture, water harvesting, chillers). Despite the many advantages, the in situ spectroscopic ellipsometry still fails in providing some key insights that remain elusive or have not been investigated, such as (i) the chemical evolution in the films, (i) the kinetics response of the films under out-of-equilibrium conditions and (iii) the local mapping of sorption events. In this thesis, we addressed some of the abovementioned questions by developing three optical methodologies to characterized nanoporous films more in depth. We first introduce in situ IR ellipsometry with an environmental/thermal chamber to monitor the evolution of structural, optical, and chemical properties during the formation of sol-gel derived mesoporous films. As a case of study, we investigated mesoporous TiO2 formation during the calcination and photo-annealing processe. Furthermore, we introduce a new approach called "cyclic ellipsometry" to study the sorption kinetics behavior of different known nanoporous films, including TiO2, SiO2, and MOFs films. Inspired by cyclic voltammetry (in electrochemistry), this method allows us to investigate sorption response into the pores of the films in out-of-equilibrium conditions. At last, we investigate the possibility of visualizing local sorption events by the combination of porous structure with plasmonic nanoantennas. First, we developed a simulation toolbox to describe the optical properties of the composite plasmonic films. Then, we introduce environmental hyperspectral microscopy to follow sorption behaviors at the single antenna level. At last, a composite plasmonic porous coating was fabricated in which local heating is induced by light irradiation, a first step toward future programmable devices. More broadly, our studies highlight the potential of optical spectroscopies with environmental chambers to probe the response and the evolution of nanoporous films in various conditions (equilibrium vs out-of-equilibrium) and at different scales (local vs ensemble) with important implications at the fundamental and applied levels
Topoglidis, Emmanuel. "Biosensors based on nanoporous TiO2 films". Thesis, Imperial College London, 2001. http://hdl.handle.net/10044/1/7573.
Texto completo da fonteGage, David Maxwell. "Fracture of nanoporous organosilicate thin films /". May be available electronically:, 2008. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.
Texto completo da fonteCeratti, Davide Raffaele. "Viability of nanoporous films for nanofluidic applications". Thesis, Paris 6, 2015. http://www.theses.fr/2015PA066482/document.
Texto completo da fonteThis thesis had a dual purpose: i) the development of nanofluidic devices through not lithographic, cheap and scalable bottom-up approach ii) the understanding of nanofluidic phenomena both through experiments and simulations. Mesoporous thin films, in particular Pillared Planar Nanochannels (PPNs), were prepared and utilized to study the capillary infiltration of liquids in nanostructures and have been tested for future nanofluidic applications like separations and nanoconfined reactions. Non organized mesoporous films have also been studied to determine the relationship between nanostructure characteristics and infiltration speed. It has been also demonstrated that in the case of porosities with reduced bottle-necks capillary penetration is performed through a vapor mediated mechanism The samples were prepared by dip-coating. A novel method of preparation based on the substitution of a large part of the deposing solution in dip-coating with an inert fluid has been developed in order to strongly reduce the fabrication costs and allow the preparation of larger samples. Moreover advancement in control of the dip-coating technique in “acceleration-mode” to produce thickness gradients has been developed and some potential application linked to fluidics shown. Finally a part of the effort of this thesis has been placed in the modeling of the electro-osmotic phenomenon in nanostructures through a rather novel simulation method, Stochastic Rotational Dynamics, which takes into account the hydrodynamics and the other interactions inside a nanofluidic system. Validations of the method and further investigations in particular nanofluidic conditions have been performed
Ceratti, Davide Raffaele. "Viability of nanoporous films for nanofluidic applications". Electronic Thesis or Diss., Paris 6, 2015. http://www.theses.fr/2015PA066482.
Texto completo da fonteThis thesis had a dual purpose: i) the development of nanofluidic devices through not lithographic, cheap and scalable bottom-up approach ii) the understanding of nanofluidic phenomena both through experiments and simulations. Mesoporous thin films, in particular Pillared Planar Nanochannels (PPNs), were prepared and utilized to study the capillary infiltration of liquids in nanostructures and have been tested for future nanofluidic applications like separations and nanoconfined reactions. Non organized mesoporous films have also been studied to determine the relationship between nanostructure characteristics and infiltration speed. It has been also demonstrated that in the case of porosities with reduced bottle-necks capillary penetration is performed through a vapor mediated mechanism The samples were prepared by dip-coating. A novel method of preparation based on the substitution of a large part of the deposing solution in dip-coating with an inert fluid has been developed in order to strongly reduce the fabrication costs and allow the preparation of larger samples. Moreover advancement in control of the dip-coating technique in “acceleration-mode” to produce thickness gradients has been developed and some potential application linked to fluidics shown. Finally a part of the effort of this thesis has been placed in the modeling of the electro-osmotic phenomenon in nanostructures through a rather novel simulation method, Stochastic Rotational Dynamics, which takes into account the hydrodynamics and the other interactions inside a nanofluidic system. Validations of the method and further investigations in particular nanofluidic conditions have been performed
Kipnusu, Wycliffe Kiprop. "Effects of Nanoscale Confinement on the Structure and Dynamics of Glass-forming Systems". Doctoral thesis, Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-183530.
Texto completo da fonteLivros sobre o assunto "Films nanoporeux"
Ree, Moonhor. Low-k nanoporous interdielectrics: Materials, thin film fabrications, structures and properties. Hauppauge, N.Y: Nova Science Publishers, 2010.
Encontre o texto completo da fonteKoblischka, M. R. Growth and Characterization of HTSc Nanowires and Nanoribbons. Editado por A. V. Narlikar. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780198738169.013.11.
Texto completo da fonteCapítulos de livros sobre o assunto "Films nanoporeux"
Dufort y Álvarez, Guillermo, Gadiel Seroussi, Pablo Smircich, José Sotelo, Idoia Ochoa e Álvaro Martín. "Compression of Nanopore FASTQ Files". In Bioinformatics and Biomedical Engineering, 36–47. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-17938-0_4.
Texto completo da fonteWu, Shuanghong, Han Zhou, Mengmeng Hao e Zhi Chen. "Nanoporous Palladium Films Based Resistive Hydrogen Sensors". In Outlook and Challenges of Nano Devices, Sensors, and MEMS, 365–93. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-50824-5_13.
Texto completo da fonteSmith, Joanna J., e Ilya Zharov. "Ion Transport in Sulfonated Nanoporous Opal Films". In ACS Symposium Series, 248–55. Washington, DC: American Chemical Society, 2008. http://dx.doi.org/10.1021/bk-2008-0996.ch018.
Texto completo da fonteKhabibullin, Amir, e Ilya Zharov. "Responsive Nanoporous Silica Colloidal Films and Membranes". In Intelligent Stimuli-Responsive Materials, 265–91. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118680469.ch8.
Texto completo da fonteJoshi, Ved Prakash, Nitish Kumar e Rahul R. Salunkhe. "Nanoporous Metal Oxides for Supercapacitor Applications". In Chemically Deposited Nanocrystalline Metal Oxide Thin Films, 601–21. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68462-4_23.
Texto completo da fonteDel Giudice, Alessandra, Giulio Benetti, Claudio Piazzoni e Francesca Borghi. "Porosity of Nanostructured Carbon Thin Films". In Nanoporous Carbons for Soft and Flexible Energy Devices, 159–79. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-81827-2_8.
Texto completo da fonteYadav, Arti, Prashant Pendyala e M. S. Bobji. "On Using Nanoporous Alumina Films as Tribological Coating". In Lecture Notes in Mechanical Engineering, 403–9. New Delhi: Springer India, 2013. http://dx.doi.org/10.1007/978-81-322-1656-8_36.
Texto completo da fonteOhgai, Takeshi, Masayuki Mizumoto, Shigeki Nomura e Akio Kagawa. "Electrodeposition of Metallic Nanowires in Nanoporous Polycarbonate Films". In THERMEC 2006, 1253–57. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.1253.
Texto completo da fonteHyeon Lee, Jingyu, Yi Yeol Lyu, Mong Sup Lee, Jin Heong Yim e Sang Youl Kim. "Characterization of Nanoporous Low Dielectric Polysilsesquioxane Thin Films". In Key Engineering Materials, 907–11. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-958-x.907.
Texto completo da fonteKashefi-Kheyrabadi, Leila, Abolhassan Noori e Masoud Ayatollahi Mehrgardi. "Application of Bioconjugated Nanoporous Gold Films in Electrochemical Biosensors". In Biosensors Nanotechnology, 345–74. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118773826.ch11.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Films nanoporeux"
Gan, Yong X., Surya V. Pothula e Matthew J. Franchetti. "Plasticity of Nanoporous Ni/YSZ Anode: A Numerical Analysis". In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33194.
Texto completo da fonteGarahan, Anna, Laurent Pilon, Juan Yin e Indu Saxena. "Optical Properties of Nanocomposite Thin-Films". In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13309.
Texto completo da fonteYahaya, Hafizal, Yoshifumi Ikoma, Keiji Kuriyama e Teruaki Motooka. "Fabrication of nanopores utilizing SiC/Si(001) heteroepitaxial growth on SOI substrates: nanopore density control". In Seventh International Conference on Thin Film Physics and Applications, editado por Junhao Chu e Zhanshan Wang. SPIE, 2010. http://dx.doi.org/10.1117/12.888388.
Texto completo da fonteGhazaryan, Lilit, e Adriana Viorica Szeghalmi. "Reproducibility and stability of nanoporous SiO2 thin film coatings". In Advances in Optical Thin Films VI, editado por Michel Lequime, H. Angus Macleod e Detlev Ristau. SPIE, 2018. http://dx.doi.org/10.1117/12.2313847.
Texto completo da fonteHu, Lili, Junlan Wang, Zijian Li, Shuang Li e Yushan Yan. "Interfacial Adhesion of Nanoporous Zeolite Thin Films". In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-62022.
Texto completo da fonteZolotoukhina, Tatiana, e Takeo Fukui. "Identification of Nucleobases of Single Stranded DNA by Nanopore Force Resolution at Different Film Thickness". In ASME/JSME 2011 8th Thermal Engineering Joint Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/ajtec2011-44260.
Texto completo da fonteShafer, Juliet, Jonghyun Lee e Debjyoti Banerjee. "Experimental Investigation of the Nano-Fin Effect (nFE) During Thin Film Evaporation From Nanopores Using Temperature Nano-Sensors". In ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-117183.
Texto completo da fonteShafer, Julie, Jonghyun Lee, Ashok Thyagarajan e Debjyoti Banerjee. "Experimental Study of the Nano-Fin Effect (nFE) During Thin Film Evaporation From Nanopores in Anodic Aluminum Oxide (AAO) Membrane Substrates Integrated With Nano-Thermocouple / Thin Film Thermocouple (TFT) Array". In ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-96168.
Texto completo da fonteZou, An, Sajag Poudel e Shalabh C. Maroo. "Confinement Effects on Molecular Mechanics and Structure of the Liquid Layers at Solid-Liquid Interface". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70811.
Texto completo da fonteNiauzorau, Stanislau, Placid Ferreira e Bruno Azeredo. "Synthesis of Porous Noble Metal Films With Tunable Porosity by Timed Dealloying". In ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6665.
Texto completo da fonteRelatórios de organizações sobre o assunto "Films nanoporeux"
Costanzo, Francesco. Model-Based Simulations to Engineer Nanoporous Thin Films. Fort Belvoir, VA: Defense Technical Information Center, dezembro de 2004. http://dx.doi.org/10.21236/ada438559.
Texto completo da fonteRowen, Adam M., Daniel David Koleske, Hongyou Fan, C. Jeffrey Brinker, David Bruce Burckel, John Dalton Williams, Christian L. Arrington e William Arthur Steen. Nanoporous films for epitaxial growth of single crystal semiconductor materials : final LDRD report. Office of Scientific and Technical Information (OSTI), outubro de 2007. http://dx.doi.org/10.2172/966925.
Texto completo da fonteHattar, Khalid Mikhiel, e David Robinson. In-situ 3D characterization of He bubble and displacement damage in dense and nanoporous thin films. Office of Scientific and Technical Information (OSTI), outubro de 2015. http://dx.doi.org/10.2172/1226424.
Texto completo da fonte