Artigos de revistas sobre o tema "Fabrication additive (FDM)"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Fabrication additive (FDM)".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Stöckli, Fritz, Fabio Modica e Kristina Shea. "Designing passive dynamic walking robots for additive manufacture". Rapid Prototyping Journal 22, n.º 5 (15 de agosto de 2016): 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Texto completo da fonteGutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin et al. "CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2011, n.º 1 (1 de janeiro de 2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Texto completo da fonteGeorgopoulou, Antonia, Lukas Egloff, Bram Vanderborght e Frank Clemens. "A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing". Actuators 10, n.º 5 (10 de maio de 2021): 102. http://dx.doi.org/10.3390/act10050102.
Texto completo da fonteCuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva e Armando Roman-Flores. "Additive manufacturing and mechanical properties of lattice-curved structures". Rapid Prototyping Journal 25, n.º 5 (10 de junho de 2019): 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Texto completo da fonteWang, Shushu, Rakshith Badarinath, El-Amine Lehtihet e Vittaldas Prabhu. "Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot". International Journal of Automation Technology 11, n.º 1 (5 de janeiro de 2017): 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
Texto completo da fonteT., Sathies, Senthil P. e Anoop M.S. "A review on advancements in applications of fused deposition modelling process". Rapid Prototyping Journal 26, n.º 4 (30 de janeiro de 2020): 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Texto completo da fonteHu, Xueling, Alix Marcelle Sansi Seukep, Velmurugan Senthooran, Lixin Wu, Lei Wang, Chen Zhang e Jianlei Wang. "Progress of Polymer-Based Dielectric Composites Prepared Using Fused Deposition Modeling 3D Printing". Nanomaterials 13, n.º 19 (6 de outubro de 2023): 2711. http://dx.doi.org/10.3390/nano13192711.
Texto completo da fonteRaju, Suresh. "Evaluating Impact of Different Parameters in Additive Manufacturing for Complex Situations". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, n.º 05 (2 de junho de 2024): 1–5. http://dx.doi.org/10.55041/ijsrem35274.
Texto completo da fonteLaban, Othman, Elsadig Mahdi, Samahat Samim e John-John Cabibihan. "A Comparative Study between Polymer and Metal Additive Manufacturing Approaches in Investigating Stiffened Hexagonal Cells". Materials 14, n.º 4 (12 de fevereiro de 2021): 883. http://dx.doi.org/10.3390/ma14040883.
Texto completo da fontePaterson, Abby Megan, Richard Bibb, R. Ian Campbell e Guy Bingham. "Comparing additive manufacturing technologies for customised wrist splints". Rapid Prototyping Journal 21, n.º 3 (20 de abril de 2015): 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Texto completo da fontePrakash, Kode Jaya, e Shivraj Narayan Yeole. "Design and Additive Manufacturing of a Prototype Using Fused Deposition Modeling Technique". Journal of Mechatronics Machine Design and Manufacturing 6, n.º 2 (2024): 1–6. http://dx.doi.org/10.46610/jmmdm.2024.v06i02.001.
Texto completo da fonteKarimi, Armin, Davood Rahmatabadi e Mostafa Baghani. "Various FDM Mechanisms Used in the Fabrication of Continuous-Fiber Reinforced Composites: A Review". Polymers 16, n.º 6 (18 de março de 2024): 831. http://dx.doi.org/10.3390/polym16060831.
Texto completo da fonteBesnea, Daniel, Georgeta Ionascu, Mihai Avram, Lucian Bogatu e Alina Spanu. "3D CAD, CAM and Rapid Prototyping Applied for Cam Fabrication". Applied Mechanics and Materials 658 (outubro de 2014): 553–56. http://dx.doi.org/10.4028/www.scientific.net/amm.658.553.
Texto completo da fontePatterson, Albert E., Charul Chadha e Iwona M. Jasiuk. "Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing". Journal of Manufacturing and Materials Processing 5, n.º 2 (10 de abril de 2021): 33. http://dx.doi.org/10.3390/jmmp5020033.
Texto completo da fonteQuiñonez, Paulina A., Leticia Ugarte-Sanchez, Diego Bermudez, Paulina Chinolla, Rhyan Dueck, Truman J. Cavender-Word e David A. Roberson. "Design of Shape Memory Thermoplastic Material Systems for FDM-Type Additive Manufacturing". Materials 14, n.º 15 (30 de julho de 2021): 4254. http://dx.doi.org/10.3390/ma14154254.
Texto completo da fonteUlkir, Osman, Mehmet Said Bayraklılar e Melih Kuncan. "Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm". Applied Sciences 14, n.º 5 (29 de fevereiro de 2024): 2046. http://dx.doi.org/10.3390/app14052046.
Texto completo da fonteJamal, Muhammad Azfar, Owaisur Rahman Shah, Usman Ghafoor, Yumna Qureshi e M. Raheel Bhutta. "Additive Manufacturing of Continuous Fiber-Reinforced Polymer Composites via Fused Deposition Modelling: A Comprehensive Review". Polymers 16, n.º 12 (7 de junho de 2024): 1622. http://dx.doi.org/10.3390/polym16121622.
Texto completo da fonteAbas, Muhammad, Mohammed Al Awadh, Tufail Habib e Sahar Noor. "Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites". Polymers 15, n.º 17 (1 de setembro de 2023): 3633. http://dx.doi.org/10.3390/polym15173633.
Texto completo da fonteOlivas, Richard, Rudy Salas, Dan Muse, Eric MacDonald, Ryan Wicker, Mike Newton e Ken Church. "Structural Electronics through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2010, n.º 1 (1 de janeiro de 2010): 000940–46. http://dx.doi.org/10.4071/isom-2010-tha5-paper6.
Texto completo da fonteThorsnes, Quinn S., Paul R. Turner, Mohammed Azam Ali e Jaydee D. Cabral. "Integrating Fused Deposition Modeling and Melt Electrowriting for Engineering Branched Vasculature". Biomedicines 11, n.º 12 (24 de novembro de 2023): 3139. http://dx.doi.org/10.3390/biomedicines11123139.
Texto completo da fonteNaidu, A. Lakshumu, K. Himanth Kumar, G. Ramesh Kumar, L. Vedavathi, J. Naveen Kumar, G. Shanmukha Rao e N. Pavan Kalyan. "A Review on Fabrication and Printing of Carbon Fiber-Reinforced Composite Filaments using FDM Process". International Journal of Membrane Science and Technology 10, n.º 2 (30 de julho de 2023): 2873–81. http://dx.doi.org/10.15379/ijmst.v10i2.2979.
Texto completo da fonteGalatas, Athanasios, Hany Hassanin, Yahya Zweiri e Lakmal Seneviratne. "Additive Manufactured Sandwich Composite/ABS Parts for Unmanned Aerial Vehicle Applications". Polymers 10, n.º 11 (13 de novembro de 2018): 1262. http://dx.doi.org/10.3390/polym10111262.
Texto completo da fonteKazberov, Roman Ya. "Application of Polymer Materials and Additive Technologies in Electrical Equipment of the Agro-Industrial Complex". Elektrotekhnologii i elektrooborudovanie v APK 48, n.º 4 (dezembro de 2021): 51–55. http://dx.doi.org/10.22314/2658-4859-2021-68-4-51-55.
Texto completo da fonteBarreto, Gabriela, Santiago Restrepo, Carlos Mauricio Vieira, Sergio Neves Monteiro e Henry A. Colorado. "Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications". Polymers 16, n.º 2 (15 de janeiro de 2024): 245. http://dx.doi.org/10.3390/polym16020245.
Texto completo da fonteMogan, J., W. S. W. Harun, K. Kadirgama, D. Ramasamy, F. M. Foudzi, A. B. Sulong, F. Tarlochan e F. Ahmad. "Fused Deposition Modelling of Polymer Composite: A Progress". Polymers 15, n.º 1 (21 de dezembro de 2022): 28. http://dx.doi.org/10.3390/polym15010028.
Texto completo da fonteKhan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad e Maqsood Ahmed Khan. "Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen". Materials Science Forum 887 (março de 2017): 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Texto completo da fonteWang, Hao, Hamzeh A. Al Shraida e Jin Yu. "Predictive Modeling of Out-of-Plane Deviation for the Quality Improvement of Additive Manufacturing". Materials Science Forum 1086 (27 de abril de 2023): 79–83. http://dx.doi.org/10.4028/p-12034b.
Texto completo da fonteWang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. "Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach". Rapid Prototyping Journal 28, n.º 4 (25 de outubro de 2021): 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Texto completo da fonteSingh, Sunpreet, e Rupinder Singh. "Mechanical characterization and comparison of additive manufactured ABS, Polyflex™ and ABS/Polyflex™ blended functional prototypes". Rapid Prototyping Journal 26, n.º 2 (13 de janeiro de 2020): 225–37. http://dx.doi.org/10.1108/rpj-11-2017-0234.
Texto completo da fontePatterson, Albert E., Charul Chadha e Iwona M. Jasiuk. "Manufacturing process-driven structured materials (MPDSMs): design and fabrication for extrusion-based additive manufacturing". Rapid Prototyping Journal 28, n.º 4 (25 de outubro de 2021): 716–31. http://dx.doi.org/10.1108/rpj-04-2021-0072.
Texto completo da fonteTateno, Toshitake, Yuta Yaguchi e Osamu Hasegawa. "Geometric Accuracy Evaluation of Fabricated Parts by Additive Manufacturing toward Parallel Fabrication". Applied Mechanics and Materials 761 (maio de 2015): 98–103. http://dx.doi.org/10.4028/www.scientific.net/amm.761.98.
Texto completo da fonteTsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. "Freeform additive manufacturing by vari-directional vari-dimensional material deposition". Rapid Prototyping Journal 24, n.º 2 (12 de março de 2018): 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Texto completo da fonteAsadollahi-Yazdi, Elnaz, Julien Gardan e Pascal Lafon. "Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling". Rapid Prototyping Journal 25, n.º 5 (10 de junho de 2019): 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
Texto completo da fonteR., Prithvirajan, Sugavaneswaran M., Sathishkumar N. e Arumaikkannu G. "Metal bellow hydroforming using additive manufactured die: a case study". Rapid Prototyping Journal 25, n.º 4 (13 de maio de 2019): 765–74. http://dx.doi.org/10.1108/rpj-07-2018-0182.
Texto completo da fonteRafael Santana Queiroz, Lucas Marins Batista, Miguel Felipe Nery Vieira, Lucas Cruz da Silva, Bruno Caetano dos Santos Silva e Rodrigo Santiago Coelho. "A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines". JOURNAL OF BIOENGINEERING, TECHNOLOGIES AND HEALTH 6, n.º 1 (8 de abril de 2023): 91–97. http://dx.doi.org/10.34178/jbth.v6i1.286.
Texto completo da fonteDrossel, Welf-Guntram, Jörn Ihlemann, Ralf Landgraf, Erik Oelsch e Marek Schmidt. "Basic Research for Additive Manufacturing of Rubber". Polymers 12, n.º 10 (1 de outubro de 2020): 2266. http://dx.doi.org/10.3390/polym12102266.
Texto completo da fonteVyavahare, Swapnil, Shailendra Kumar e Deepak Panghal. "Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling". Rapid Prototyping Journal 26, n.º 9 (13 de julho de 2020): 1535–54. http://dx.doi.org/10.1108/rpj-12-2019-0315.
Texto completo da fonteDontsov, Yury V., Sergey V. Panin, Dmitry G. Buslovich e Filippo Berto. "Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites". Materials 13, n.º 12 (15 de junho de 2020): 2718. http://dx.doi.org/10.3390/ma13122718.
Texto completo da fonteLanzotti, Antonio, Massimo Martorelli, Teresa Russo e Antonio Gloria. "Design of Additively Manufactured Lattice Structures for Tissue Regeneration". Materials Science Forum 941 (dezembro de 2018): 2154–59. http://dx.doi.org/10.4028/www.scientific.net/msf.941.2154.
Texto completo da fonteBagatella, Simone, Annacarla Cereti, Francesco Manarini, Marco Cavallaro, Raffaella Suriano e Marinella Levi. "Thermally Conductive and Electrically Insulating Polymer-Based Composites Heat Sinks Fabricated by Fusion Deposition Modeling". Polymers 16, n.º 3 (4 de fevereiro de 2024): 432. http://dx.doi.org/10.3390/polym16030432.
Texto completo da fonteAli, Hind B., Jawad K. Oleiwi e Farhad M. Othman. "Compressive and Tensile Properties of ABS Material as a Function of 3D Printing Process Parameters". Revue des composites et des matériaux avancés 32, n.º 3 (30 de junho de 2022): 117–23. http://dx.doi.org/10.18280/rcma.320302.
Texto completo da fonteFountas, Nikolaos A., Ioannis Papantoniou, John D. Kechagias, Dimitrios E. Manolakos e Nikolaos M. Vaxevanidis. "Experimental and statistical investigation on flexural properties of FDM fabricated PLA specimens applying response surface methodology". Journal of Physics: Conference Series 2692, n.º 1 (1 de fevereiro de 2024): 012047. http://dx.doi.org/10.1088/1742-6596/2692/1/012047.
Texto completo da fonteBamiduro, Oluwakayode, Gbadebo Owolabi, Mulugeta A. Haile e Jaret C. Riddick. "The influence of load direction, microstructure, raster orientation on the quasi-static response of fused deposition modeling ABS". Rapid Prototyping Journal 25, n.º 3 (8 de abril de 2019): 462–72. http://dx.doi.org/10.1108/rpj-04-2018-0087.
Texto completo da fontePranzo, Daniela, Piero Larizza, Daniel Filippini e Gianluca Percoco. "Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review". Micromachines 9, n.º 8 (27 de julho de 2018): 374. http://dx.doi.org/10.3390/mi9080374.
Texto completo da fonteSyrlybayev, Daniyar, Beibit Zharylkassyn, Aidana Seisekulova, Mustakhim Akhmetov, Asma Perveen e Didier Talamona. "Optimisation of Strength Properties of FDM Printed Parts—A Critical Review". Polymers 13, n.º 10 (14 de maio de 2021): 1587. http://dx.doi.org/10.3390/polym13101587.
Texto completo da fonteM. Johnson, Wayne, Matthew Rowell, Bill Deason e Malik Eubanks. "Comparative evaluation of an open-source FDM system". Rapid Prototyping Journal 20, n.º 3 (14 de abril de 2014): 205–14. http://dx.doi.org/10.1108/rpj-06-2012-0058.
Texto completo da fontePodsiadły, Bartłomiej, Piotr Matuszewski, Andrzej Skalski e Marcin Słoma. "Carbon Nanotube-Based Composite Filaments for 3D Printing of Structural and Conductive Elements". Applied Sciences 11, n.º 3 (30 de janeiro de 2021): 1272. http://dx.doi.org/10.3390/app11031272.
Texto completo da fonteSingh, Rupinder, Ranvijay Kumar, Ilenia Farina, Francesco Colangelo, Luciano Feo e Fernando Fraternali. "Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures". Polymers 11, n.º 1 (4 de janeiro de 2019): 62. http://dx.doi.org/10.3390/polym11010062.
Texto completo da fonteGarcía-Martínez, Héctor, Ernesto Ávila-Navarro, Germán Torregrosa-Penalva, Alberto Rodríguez-Martínez, Carolina Blanco-Angulo e Miguel A. de la de la Casa-Lillo. "Low-Cost Additive Manufacturing Techniques Applied to the Design of Planar Microwave Circuits by Fused Deposition Modeling". Polymers 12, n.º 9 (28 de agosto de 2020): 1946. http://dx.doi.org/10.3390/polym12091946.
Texto completo da fonteUlkir, Osman. "Energy-Consumption-Based Life Cycle Assessment of Additive-Manufactured Product with Different Types of Materials". Polymers 15, n.º 6 (15 de março de 2023): 1466. http://dx.doi.org/10.3390/polym15061466.
Texto completo da fonte