Conecte-se

Bibliografias temáticas / Engineering

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Engineering"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 14 de novembro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Engineering".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Engineering"

1

del Águila, Isabel M., José Palma e Samuel Túnez. "Milestones in Software Engineering and Knowledge Engineering History: A Comparative Review". Scientific World Journal 2014 (2014): 1–10. http://dx.doi.org/10.1155/2014/692510.

Texto completo da fonte

Resumo:

We present a review of the historical evolution of software engineering, intertwining it with the history of knowledge engineering because “those who cannot remember the past are condemned to repeat it.” This retrospective represents a further step forward to understanding the current state of both types of engineerings; history has also positive experiences; some of them we would like to remember and to repeat. Two types of engineerings had parallel and divergent evolutions but following a similar pattern. We also define a set of milestones that represent a convergence or divergence of the software development methodologies. These milestones do not appear at the same time in software engineering and knowledge engineering, so lessons learned in one discipline can help in the evolution of the other one.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Brook, Peter, Azad M. Madni, Michael Pennotti, David Rousseau e Hillary Sillito. "Five Perspectives on Transdisciplinary Systems Engineering". INSIGHT 27, n.º 2 (abril de 2024): 21–26. http://dx.doi.org/10.1002/inst.12483.

Texto completo da fonte

Resumo:

ABSTRACTThis article offers insights from five INCOSE Fellows on the evolution and significance of transdisciplinarity in systems engineering. Michael Pennotti reviews the origins of systems engineering, emphasizing its inherent transdisciplinary nature and the need for continuous evolution. Azad Madni considers transdisciplinarity as systems engineering's true calling, crucial for the 21st century, and highlights his TRASEE™ education paradigm that underpins the Systems Architecting and Engineering program that he directs at the University of Southern California as pivotal for systems engineering's advancement. Hillary Sillitto sees the climate crisis as systems engineering's most critical and complex challenge, asserting transdisciplinarity's crucial role in addressing it. David Rousseau examines the cultural and scientific underpinnings of transdisciplinarity, presenting systems engineering as a prime example. Peter Brook envisions the joint evolution of systems sciences and systems engineering to confront future challenges, advocating for transdisciplinarity as an essential role in systems engineering leadership for addressing global challenges.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Redman, Quentin, George Stratton, Ed Casey e Diana Patane. "Engineering and Implementing RMS Engineering's DTC Metric". Journal of Cost Analysis and Parametrics 1, n.º 2 (novembro de 2008): 45–58. http://dx.doi.org/10.1080/1941658x.2008.10462216.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Maier, Mark W. "Systems Engineering as Engineering's Shared Intellectual Content". INSIGHT 8, n.º 2 (março de 2006): 46–47. http://dx.doi.org/10.1002/inst.20068246.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Guo, Li Qun, e Yu Guo Cheng. "Consideration on Group Excavation Engineering". Applied Mechanics and Materials 256-259 (dezembro de 2012): 315–19. http://dx.doi.org/10.4028/www.scientific.net/amm.256-259.315.

Texto completo da fonte

Resumo:

Group excavation engineering is a typical engineering roadblock in the process of urban underground space development . The concept of group excavation engineering was put forward and its features was described combined with practical engineerings. On the base of analysising the sections relevant group excavation engineering in Chinese codes, suggestions were given in the aspects of engineering investigation,design,construction and monitoring. At last,we point out that the theory is far behind the practice application in group excavation engineering.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Redman, F. Quentin, George Stratton e Ed Casey. "4.3.2 Engineering and Implementing RMS Engineering's DTC Metric". INCOSE International Symposium 15, n.º 1 (julho de 2005): 623–37. http://dx.doi.org/10.1002/j.2334-5837.2005.tb00695.x.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

hashemi, Seyed mehdi golestan, bijan khaiambashi, alireza mansoorian e Maryam heidari. "Presenting a Consolidated Model of Bionic Product Design Engineering and Systems Engineering, New Approach in Product Design Engineering". International Academic Journal of Science and Engineering 05, n.º 02 (19 de dezembro de 2018): 111–24. http://dx.doi.org/10.9756/iajse/v5i1/1810030.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Hall, Jon G. "Engineering knowledge engineering". Expert Systems 29, n.º 5 (novembro de 2012): 427–28. http://dx.doi.org/10.1111/exsy.12007.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Fox, Timothy A., e Lee Chapman. "Engineering geo-engineering". Meteorological Applications 18, n.º 1 (17 de fevereiro de 2011): 1–8. http://dx.doi.org/10.1002/met.245.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

NAGATOMO, Makoto. "Macro Engineering and Mechanical Engineering(Macro Engineering and Mechanical Engineering)". Journal of the Society of Mechanical Engineers 91, n.º 834 (1988): 427–32. http://dx.doi.org/10.1299/jsmemag.91.834_427.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Engineering"

1

VanderSteen, Jonathan Daniel James. "Humanitarian engineering in the engineering curriculum". Thesis, Kingston, Ont. : [s.n.], 2008. http://hdl.handle.net/1974/1373.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Riehle, Richard D. "An engineering context for software engineering". Monterey, Calif. : Naval Postgraduate School, 2008. http://edocs.nps.edu/npspubs/scholarly/theses/2008/Sept/08Sep%5FRiehle%5FPhD.pdf.

Texto completo da fonte

Resumo:

Dissertation (Ph.D. in Software Engineering)--Naval Postgraduate School, September 2008.
Dissertation Supervisor(s): Michael, J. Bret. "September 2008." Description based on title screen as viewed on November 4, 2008. Includes bibliographical references (p. 111-120). Also available in print.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

BERNOCCO, MARCO. "Bioreactor engineering for tissue engineering application". Doctoral thesis, Politecnico di Torino, 2013. http://hdl.handle.net/11583/2513796.

Texto completo da fonte

Resumo:

Lo scopo di questo lavoro di tesi è la caratterizzazione metrologica di un bioreattore con l’intento di aumentare la riproducibilità e l’affidabilità dei processi di Ingegneria tessutale (Tissue Engineering, TE). La Tissue engineering (TE) o ingegneria dei tessuti è la disciplina che studia la comprensione dei principi della crescita dei tessuti, e la loro applicazione per produrre tessuto funzionale per uso clinico o diagnostico. Uno dei principali scopi della TE è l’impiego di tessuti in crescita naturale extracorporea per la medicina rigenerativa, in altre parole lo sviluppo di strategie terapeutiche mirate alla sostituzione, riparazione, manutenzione e/o il miglioramento della funzione dei tessuti. L’ingegneria dei tessuti è caratterizzata da una grande interdisciplinarità che prevede la collaborazione di figure professionali con competenze molto differenti tra loro, quali biologi, chimici, fisici, matematici, ingegneri. L’obiettivo è il progetto di un bioreattore che sia affidabile e controllabile per seguire l’evoluzione del processo. Questo deve essere eseguito applicando metodi metrologici allo studio del processo. La metrologia permette di poter quantificare l’incertezza di un fenomeno quindi di determinare la proprietà di un fenomeno, corpo o sostanza, che può essere distinta qualitativamente e determinata quantitativamente. Le fonti d’incertezza che caratterizzano l’incertezza finale o composta è legata: alla mancanza di conoscenza e alla variabilità del sistema e prevede strategie differenti per la loro gestione. La mancanza di conoscenza e può essere ridotta migliorando le informazioni sul sistema in esame, mentre la variabilità del sistema sotto studio, può essere gestita riducendo degli scenari presi in considerazione o definendo più precisamente il sistema studiato.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Wahlström, Niklas. "Reverse engineering : En processkartläggning på reverse engineering". Thesis, Uppsala universitet, Industriell teknik, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-202883.

Texto completo da fonte

Resumo:

Alstom Power Sweden AB in Norrköping isexpanding their business in the presentsituation and has implemented aprocedure for reverse engineering as apart of this work. Reverse engineeringat Alstom is an extensive procedurethat is calculated to be performedunder very time demanding conditions. This thesis is a continued exertion ofthe implementation process in order toidentify and describe the mostimportant process steps in purpose to beable to manage and improve theprocess.This thesis was written with twoprimary objectives. The first was todescribe and map out the procedure torecreate technical data of a turbineblade, based on a validation of thereverse engineering process that hasbeen performed at Alstom in Norrköping.The second purpose was to describe thekey factors to achieve successful usageof reverse engineering that have beennoticed in the literature study. The work is based on a literature studyon the subject reverse engineeringwhich produced the theoreticalknowledge of the method to reproducetechnical data to a product. Theliterature study has also led to adescription of reverse engineering froma legal perspective to clarify how farit is allowed to apply the methodaccording to the patent laws. With theliterature study as support and furtherhelp and guidance from individualswithin the reverse engineering unit atAlstom, a complete picture andunderstanding of the process has beenproduced and documented.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Odendaal, Marius. "Re-engineering an engineering career / Marius Odendaal". Thesis, North-West University, 2009. http://hdl.handle.net/10394/4755.

Texto completo da fonte

Resumo:

Re-engineering is an ongoing process of change that continues throughout a person's life. It includes all aspects of life, even your career and lifestyle as you continue to grow as an individual. There is no satisfaction or of self-fulfilment in clinging to a career and its accompanying lifestyle which you have outgrown. To change this, people should approach career planning and management from a different point of view. The making of a career and lifestyle change is something most people find horrendously difficult. Making effective career and lifestyle changes incorporating your dream and passion should be seen as a challenge. There is a common denominator in this whole discussion which influences the decisions that people make when it comes to choosing their careers. It boils down to wanting to make a success of their lives and the fear of being a failure. But how does one define success? Success can mean different things to different people. For some, monetary reward is a measure of success. Yet others have multiple definitions of success. People should first determine their own definition of success before deciding what career they would like to pursue. Many of us make this decision based on what other people, such as our parents or friends, perceive as success. Exploring career choices should be a positive undertaking for high school students. A thoughtfully constructed career choice process will provide a meaningful, productive and satisfying framework for making quality career choices. Some students do not begin to explore real career possibilities until after graduation. Tertiary education institutions should provide students with relevant information earlier in their studies. Institutions could be more proactive, giving students information that they could test and use in their daily studies and ultimately apply to their choice of career. Young adults turn to their career guidance counsellors in their schools for advice on determining what career paths they should follow. The problem within the South African public educational system currently is that there is inadequate provision for career guidance or assessment of individual learners. The majority of young people leave school with only a vague knowledge of employment opportunities and with little insight concerning the career direction most appropriate to their abilities, interests and personality. Believing that their only chance of future employment is the attainment of some sort of qualification, they are pitch-forked into tertiary education without any consideration given to the appropriateness of their chosen qualification to their abilities, interests and personality. This results in a large percentage of employees who feel trapped in an inappropriate career. This leads to low morale, disinterest and de-motivation, translating into poor performance and bad service levels. In the end unhappy employees either leave of their own free will or need to be dismissed. In either case, the cost to the business is substantial. When it comes to making a career change in order to follow your dream and passion, people are normally shackled by the comfort and security they experience in their current jobs and the fear of failing should they risk following their dream. The decision to make a career change should follow a formal process in order to enable a person to make an informed and responsible career change. The value to the researcher personally is that he will have a better understanding of why he decided to change his career. Is it a real choice or is it only a pipe dream that will eventually fade away because of the challenges facing him in the future?
Thesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2010.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Aor, Bruno. "Engineering microchannels for vascularization in bone tissue engineering". Thesis, Bordeaux, 2018. http://www.theses.fr/2018BORD0430/document.

Texto completo da fonte

Resumo:

In vitro, la formation de structures de type tubulaire avec des cellules endothéliales de veine ombilicale humaine (HUVEC) a été étudiée en combinant la fonctionnalisation de la chimie des matériaux et le développement de la géométrie tridimensionnelle. Le polycarbonate (PC) a été utilisé comme modèle pour le développement de l'échafaud. Le film de polysaccharide naturel, basé sur un dépôt alternatif couche par couche (LbL) d’acide hyaluronique (HA) et de chitosane (CHI), a d’abord été appliqué sur une surface PC et caractérisé en termes de croissance d’épaisseur microscopie à balayage lascar (CLSM). Cette première fonctionnalisation se traduit par un revêtement complet de la couche PC. Une biofonctionnalisation supplémentaire avec un peptide adhésif (RGD) et deux peptides angiogénétiques (SVV et QK) a été étudiée, immobilisant ces peptides sur le groupe carboxylique de HA précédemment déposé, en utilisant la chimie bien connue du carbodiimide. La version marquée de chaque peptide a été utilisée pour caractériser l’immobilisation et la pénétration des peptides dans les couches de polyélectrolytes, aboutissant à une greffe réussie avec une pénétration complète dans toute l’épaisseur du LbL. Des tests in vitro ont été effectués à l'aide de cellules HUVEC pour évaluer leur efficacité d'adhésion et leur activité métabolique sur la LbL avec et sans immobilisation de peptides, ce qui a permis d'améliorer l'activité préliminaire lorsque des combinaisons de peptides sont utilisées. Enfin, les micro-canaux PC (μCh) ont été développés et caractérisés pour la première fois, et les autres expériences ont été réalisées sur un micromètre de 25 μm de largeur, fonctionnalisé avec une architecture (HA / CHI) 12,5 (PC-LbL) avec des peptides RGD et QK -RGD + QK) ou avec des peptides RGD et SVV (PC-RGD + SVV). Notre première expérience de tubulogénèse a montré de manière surprenante la formation de structures de type tubulaire déjà après 2h d'incubation en utilisant la combinaison double-peptides, mais uniquement avec PC-RGD + QK. Les tubes étaient également présents après 3 et 4 heures de culture. L'expérience de co-culture avec des péricytes humains dérivés du placenta (hPC-PL) montre comment la stabilisation des tubes a été améliorée après 3 et 4 heures également pour l'échantillon de PC-RGD + SVV. Globalement, notre matériel bio-fonctionnel avec les peptides PC-RGD + QK et PC-RGD + SVV permet la formation d'une structure de type tubulaire à la fois dans une expérience de monoculture et de co-culture
In vitro, tubular-like structures formation with human umbilical vein endothelial cells (HUVECs) was investigated by combining material chemistry functionalization and three-dimensional geometry development. Polycarbonate (PC) was used as a template for the development of the scaffold. Natural polysaccharide’s film based on alternate layer-by-layer (LbL) deposition of hyaluronic acid (HA) and chitosan (CHI), was first applied to PC surface and characterized in terms of thickness growth both, in dry conditions using ellipsometry, and confocal lascar scanning microscopy (CLSM). This first functionalization results in a complete coating of the PC layer. Further biofunctionalization with one adhesive peptide (RGD) and two angiogenetic peptides (SVV and QK) was investigated, immobilizing those peptides on the carboxylic group of HA previously deposited, using the well-known carbodiimide chemistry. The labeled version of each peptide was used to characterize the peptides’ immobilization and penetration into the polyelectrolytes layers, resulting in a successful grafting with complete penetration through the entire thickness of the LbL. In vitro tests were performed using HUVECs to assess their adhesion efficiency and their metabolic activity on the LbL with and without peptide immobilization, resulting in a preliminary improved activity when peptide-combinations is used. Finally, PC micro-channels (μCh) were first developed and characterized, and the rest of the experiments were performed on μCh of 25μm width, functionalized with (HA/CHI)12.5 architecture (PC-LbL) with RGD and QK peptides (PC-RGD+QK) or with RGD and SVV peptides (PC-RGD+SVV). Our first tubulogenesis experiment surprisingly showed the formation of tubular-like structures already after 2h of incubation using the double-peptides combination but only using PC-RGD+QK the tubes were present also after 3 and 4 hours of culture. The co-culture experiment with human pericytes derived from placenta (hPC-PL) demonstrates how the stabilization of the tubes was improved after 3 and 4 hours also for the PC-RGD+SVV sample. Globally our bio-functional material with PC-RGD+QK and PC-RGD+SVV peptides allow the formation of tubular-like structure in both mono and co-culture experiment

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Steinegger, Thomas. "Defect Engineering". Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola&quot, 2009. http://nbn-resolving.de/urn:nbn:de:swb:105-8973489.

Texto completo da fonte

Resumo:

Die Kenntnisse über die zur Passivierung führenden Wechselwirkungen des Verunreinigungselements Cu mit EL2 und EL6 wurden dahingehend erweitert, dass ein Gültigkeitsbereich für die Messungen zur Bestimmung der konzentrationsproportionalen Messgröße der Defekte festgelegt wurde. Der Defekt EL6 ist das die 0.8 eV-PL-Emission bedingende und die Ladungsträgerlebensdauer determinierende Rekombinationszentrum. Die Lebensdauer wird durch mindestens ein weiteres Zentrum beeinflusst. Die atomare Struktur des EL6 wurde mit AsGa VAs und die des weiteren Zentrums mit Asi bestimmt. Mittels Wärmebehandlung kann die Ladungsträgerlebensdauer gezielt beeinflusst werden. Bei der Bildung und Annihilation sowie der Verteilung der Defekte EL2, EL6, VGa und der As-Ausscheidungen besteht eine wechselseitige Korrelation. Sowohl strukturelle Defekte als auch die Inkorporation von Dotierelementen, deren Atomradien deutlich kleiner sind als Ga und As, stellen beeinflussende Faktoren dar. Das Defekt-Transformations-Modell erklärt die Bildung wachstumsfähiger Keime einer As-Ausscheidung durch EL2 bzw. EL6 mit den sich in der ersten Koordingationssphäre befindenden As-Atomen. Das Gitterrelaxations-Modell ermöglicht die Interpretation der katalytischen Wirkung des Dotierelements C. Die Umsetzung dieser Ergebnisse bedeutet die Anwendung des Defect Engineerings im SI-LEC-GaAs.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Conocimiento, Dirección de Gestión del. "Access Engineering". McGraw-Hill, 2004. http://hdl.handle.net/10757/655256.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Шарапа, Р. В. "Genetic engineering". Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/10803.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Romaniuk, Oleg. "Social engineering". Thesis, Київський національний університет технологій та дизайну, 2019. https://er.knutd.edu.ua/handle/123456789/13157.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Engineering"

1

Zoli, Corri, Shobha Bhatia, Valerie Davidson e Kelly Rusch. Engineering. Cham: Springer International Publishing, 2008. http://dx.doi.org/10.1007/978-3-031-79946-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Service, Industrial Training, e Enterprising Northern Ireland, eds. Engineering. Belfast: Enterprising Northern Ireland in association with BIS BEECOM (International) Limited and MIVAN Limited., 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

America, Boy Scouts of, ed. Engineering. 2^a ed. Irving, Tex: Boy Scouts of America, 2000.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Brooks, Allan. Engineering. [Plymouth?]: [s.n.], 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

ill, Basher Simon creator, ed. Engineering. New York: Roaring Brook Press, 2017.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Chengdu, China) International Conference on Control Engineering and Electronics Engineering (2014. Control Engineering and Electronics Engineering. Southampton: WIT PRESS, 2015.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Symposium on Engineering Geology and Geotechnical Engineering (25th 1989 Reno, Nev.). Engineering geology and geotechnical engineering. Rotterdam, Netherlands: A.A. Balkema, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Gönen, Turan. Engineering economy for engineering managers. New York: Wiley, 1990.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Pahari, A., e B. Chauhan. Engineering Chemistry (Engineering) (Engineering). Infinity Science Press, 2007.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Banks, James H., e Robert W. Stokes. Civil Engineering: Transportation Engineering (Civil Engineering (Engineering Press)). Kaplan AEC Education, 2003.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Engineering"

1

Dods, Richard. "Bioscience Engineering (Biological Engineering)". In Concepts in Bioscience Engineering, 1–36. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-28303-2_1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Jackson, Michael. "Engineering and Software Engineering". In The Future of Software Engineering, 100–114. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-15187-3_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Barr, Avron, Brandt Dargue, Jim Goodell e Brandt Redd. "Learning Engineering is Engineering". In Learning Engineering Toolkit, 125–52. New York: Routledge, 2022. http://dx.doi.org/10.4324/9781003276579-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Syam, Dhruba J. "Engineering Materials, Engineering Drawings". In Mechanical Engineering Practices in Industry, 183–97. London: CRC Press, 2023. http://dx.doi.org/10.1201/9781003403104-11.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Pook, L. P. "Engineering". In History of Mechanism and Machine Science, 99–106. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-1415-1_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Zarach, Stephanie. "Engineering". In Debrett’s Bibliography of Business History, 93–105. London: Palgrave Macmillan UK, 1987. http://dx.doi.org/10.1007/978-1-349-08984-0_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Martinez, Jaime E. "Engineering". In The Search for Method in STEAM Education, 71–91. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-55822-6_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Williams, P. John, e P. John Williams. "Engineering". In Positioning Technology Education in the Curriculum, 87–99. Rotterdam: SensePublishers, 2011. http://dx.doi.org/10.1007/978-94-6091-675-5_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Heller, Rachelle S. "Engineering". In Handbook on Information Technologies for Education and Training, 475–84. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-662-07682-8_30.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Whittaker, Alun. "Engineering". In Theory and Evaluation of Formation Pressures, 43–72. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5355-0_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Engineering"

1

Kucheryava, Olga, Nataiia Holeho e Larysa Bachynska. "THE FEATURES OF FUNCTIONING OF THE COMMUNICATION CHANNEL WHILE MANAGING AN UNMANNED AERIAL VEHICLE". In СУЧАСНІ НАПРЯМКИ РОЗВИТКУ АВТОМАТИЗАЦІЇ, ТРАНСПОРТНИХ СИСТЕМ, ТЕХНІЧНИХ ТА КОМП’ЮТЕРНИХ НАУК. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-30.04.2021.engineering.01.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Торбієвський, Олександр. "ДОСЛІДЖЕННЯ ПРОБЛЕМ ОЦІНКИ ЯКОСТІ ДАНИХ У МІГРАЦІЯХ ДАНИХ". In СУЧАСНІ НАПРЯМКИ РОЗВИТКУ АВТОМАТИЗАЦІЇ, ТРАНСПОРТНИХ СИСТЕМ, ТЕХНІЧНИХ ТА КОМП’ЮТЕРНИХ НАУК, chair Оксана Мазурова. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-30.04.2021.engineering.02.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Бобовський, Євген. "МЕТОД ЦИФРОВОГО ГОЛОСУВАННЯ З ЧАСТКОВОЮ ПЕРЕВІРКОЮ". In СУЧАСНІ НАПРЯМКИ РОЗВИТКУ АВТОМАТИЗАЦІЇ, ТРАНСПОРТНИХ СИСТЕМ, ТЕХНІЧНИХ ТА КОМП’ЮТЕРНИХ НАУК. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-30.04.2021.engineering.03.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Глушенок, Валерій. "СПОСІБ ПОБУДОВИ ІНТЕЛЕКТУАЛЬНИХ МОБІЛЬНИХ СИСТЕМ". In СУЧАСНІ НАПРЯМКИ РОЗВИТКУ АВТОМАТИЗАЦІЇ, ТРАНСПОРТНИХ СИСТЕМ, ТЕХНІЧНИХ ТА КОМП’ЮТЕРНИХ НАУК. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-30.04.2021.engineering.04.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Кучанський, В. "АВТОПАРАМЕТРИЧНЕ САМОЗБУДЖЕННЯ ПАРНИХ ГАРМОНІЧНИХ В ЛІНІЯХ ЕЛЕКТРОПЕРЕДАВАННЯ НАДВИСОКОЇ НАПРУГИ". In АКТУАЛЬНІ ПИТАННЯ МЕХАНІЧНОЇ ТА ЕЛЕКТРИЧНОЇ ІНЖЕНЕРІЇ, ТРАНСПОРТНИХ ТЕХНОЛОГІЙ, ЕЛЕКТРОНІКИ, АВТОМАТИЗАЦІЇ ТА IT. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-05.03.2021.engineering.02.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Клементьєв, Ігор, e Євген Самохін. "РОЗРОБКА АНТИФРИКЦІЙНОГО ЕПОКСИ-ПОЛІЕФІРНОГО КОМПОЗИТНОГО МАТЕРІАЛУ ДЛЯ ВУЗЛІВ ТЕРТЯ ТРАНСПОРТНИХ ЗАСОБІВ". In АКТУАЛЬНІ ПИТАННЯ МЕХАНІЧНОЇ ТА ЕЛЕКТРИЧНОЇ ІНЖЕНЕРІЇ, ТРАНСПОРТНИХ ТЕХНОЛОГІЙ, ЕЛЕКТРОНІКИ, АВТОМАТИЗАЦІЇ ТА IT, chair Сергій Якущенко e Микола Браїло. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-05.03.2021.engineering.01.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Маріяш, Юрій. "ЗАСТОСУВАННЯ МОДЕЛЬНО-ПРОГНОЗУЮЧОГО КЕРУВАННЯ В КИСНЕВО-КОНВЕРТЕРНІЙ ПЛАВЦІ". In АКТУАЛЬНІ ПИТАННЯ МЕХАНІЧНОЇ ТА ЕЛЕКТРИЧНОЇ ІНЖЕНЕРІЇ, ТРАНСПОРТНИХ ТЕХНОЛОГІЙ, ЕЛЕКТРОНІКИ, АВТОМАТИЗАЦІЇ ТА IT, chair Олександр Степанець. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-05.03.2021.engineering.03.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Делембовський, Максим. "АНАЛІЗ ІСНУЮЧИХ ДОСЛІДЖЕНЬ МОДЕЛЮВАННЯ ЗАГРОЗ ДЛЯ ІТ-ЦІЛЕЙ". In АКТУАЛЬНІ ПИТАННЯ МЕХАНІЧНОЇ ТА ЕЛЕКТРИЧНОЇ ІНЖЕНЕРІЇ, ТРАНСПОРТНИХ ТЕХНОЛОГІЙ, ЕЛЕКТРОНІКИ, АВТОМАТИЗАЦІЇ ТА IT. Міжнародний центр наукових досліджень, 2021. http://dx.doi.org/10.36074/mcnd-05.03.2021.engineering.05.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Boetticher, Gary D. "Engineering Financial Engineering". In 2014 IEEE Conference on Computational Intelligence for Financial Engineering & Economics (CIFEr). IEEE, 2014. http://dx.doi.org/10.1109/cifer.2014.6924078.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Gruszczynski, Robert. "Software Engineering as Engineering". In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0713.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Engineering"

1

Zhou, Fan. Major: Civil Engineering (Structural Engineering). Ames (Iowa): Iowa State University, janeiro de 2021. http://dx.doi.org/10.31274/cc-20240624-977.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Friedrich, Julia, Kristin Gilbert, Andreas Matzke, Christine Mühle, Ulrike Pietrzyk, Vanita Römer, Anne Steputat-Rätze, Christian Zinke-Wehlmann, Romy Wöhlert e Robert Wolf. Menschengerechte und effiziente Gestaltung von Interaktionsarbeit : Entwicklung des Social-Service Engineering-Ansatzes. Technische Universität Dresden, 2023. http://dx.doi.org/10.25368/2023.90.

Texto completo da fonte

Resumo:

Der Forschungsbericht spiegelt die Ergebnisse der interdisziplinären Zusammenarbeit am Projekt SO-SERVE (“Social Service Engineering – Synergien von Arbeits- und Dienstleistungswissenschaft für die Verbesserung von Arbeit an und mit Menschen nutzen”) wider. Die Publikation spricht nicht nur Wissenschaftler:innen an, sondern gibt auch detaillierte Einblicke in die Arbeit der Praxispartner. Social Service Engineering geht davon aus, dass nachhaltiger Unternehmenserfolg nur durch eine beschäftigtenorientierte, menschenwürdige Arbeitsgestaltung in Verbindung mit einer Dienstleistungsgestaltung möglich ist, die wirtschaftliche Aspekte und die Wünsche der Kund:innen berücksichtigt. Deshalb kombiniert das entwickelte Social Service Engineering theoretische Ansätze, Konzepte und Methoden aus dem Service Engineering und der Arbeitspsychologie, um Synergien aus beiden Disziplinen zu generieren. Der Forschungsbericht beschreibt das Vorgehen bei der Entwicklung und Erprobung des Social Service Engineerings. Ein besonderer Fokus liegt auf der Darstellung der praktischen Anwendung in der Praxis, wobei der Fokus auf der Arbeit der Partner aus den Bereichen der ambulanten Pflege sowie der Kindertagesbetreuung liegt. Ziel des Berichtes ist, die Mehrwerte des Social Service Engineerings weiteren Unternehmen darzustellen und ihnen Möglichkeiten vorzustellen, von diesem Ansatz zu profitieren. In diesem Zusammenhang werden auch der mögliche Umgang mit Herausforderungen des Ergebnistransfers diskutiert.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Grygiel, M. L. Site systems engineering: Systems engineering management plan. Office of Scientific and Technical Information (OSTI), maio de 1996. http://dx.doi.org/10.2172/353256.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

CORPS OF ENGINEERS WASHINGTON DC. Engineering and Design: Civil Works Cost Engineering. Fort Belvoir, VA: Defense Technical Information Center, março de 1994. http://dx.doi.org/10.21236/ada404118.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

CORPS OF ENGINEERS WASHINGTON DC. Engineering and Design: Fire Protection Engineering Policy. Fort Belvoir, VA: Defense Technical Information Center, abril de 1995. http://dx.doi.org/10.21236/ada404421.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Blackburn, Mark, Mary Bone e Gary Witus. Transforming System Engineering through Model-Centric Engineering. Fort Belvoir, VA: Defense Technical Information Center, novembro de 2015. http://dx.doi.org/10.21236/ada631778.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Blackburn, Mark. Introducing Model Based Systems Engineering Transforming System Engineering through Model-Based Systems Engineering. Fort Belvoir, VA: Defense Technical Information Center, março de 2014. http://dx.doi.org/10.21236/ada605264.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Blackburn, Mark, Rob Cloutier, Gary Witus e Eirik Hole. Introducing Model-Based System Engineering Transforming System Engineering through Model-Based Systems Engineering. Fort Belvoir, VA: Defense Technical Information Center, março de 2014. http://dx.doi.org/10.21236/ada603095.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Saito, T. T. Optical engineering. Office of Scientific and Technical Information (OSTI), janeiro de 1998. http://dx.doi.org/10.2172/15009529.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Hunt, D. N. Information engineering. Office of Scientific and Technical Information (OSTI), fevereiro de 1997. http://dx.doi.org/10.2172/611749.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!