Bibliografias temáticas / Electronic data processing departments

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Electronic data processing departments"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 29 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Electronic data processing departments".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Electronic data processing departments"

Zhu, Yongjie, e Youcheng Li. "A Data Sharing and Integration Technology for Heterogeneous Databases". International Journal of Circuits, Systems and Signal Processing 16 (10 de janeiro de 2022): 232–38. http://dx.doi.org/10.46300/9106.2022.16.28.

Texto completo da fonte

Resumo:

For a long time, there are a large number of heterogeneous databases on the network, and their heterogeneity is manifested in many aspects. With the development of enterprise informatization and e-government, the system database of each department constitutes a real heterogeneous database framework with its independence and autonomy in the network system of many different functional departments. This paper will design information sharing between heterogeneous databases of network database system of many similar functional departments by using XML data model. The solution of data sharing between heterogeneous databases can accelerate the integration of information systems with departments and businesses as the core among enterprises, form a broader and more efficient organic whole, improve the speed of business processing, broaden business coverage, and strengthen cooperation and exchange among enterprises. In addition, heterogeneous database sharing can avoid the waste of data resources caused by the heterogeneity of database, and promote the availability rate of data resources. Due to the advantages of XML data model, the system has good scalability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Altamimi, Mohammed H., Maalim A. Aljabery e Imad S. Alshawi. "Big Data Framework Classification for Public E-Governance Using Machine Learning Techniques". Basrah Researches Sciences 48, n.º 2 (30 de dezembro de 2022): 112–22. http://dx.doi.org/10.56714/bjrs.48.2.11.

Texto completo da fonte

Resumo:

Using Machine Learning (ML) in many fields has shown remarkable results, especially in government data analysis, classification, and prediction. This technology has been applied to the National ID data (Electronic Civil Registry) (ECR). It is used in analyzing this data and creating an e-government project to join the National ID with three government departments (Military, Social Welfare, and Statistics_ Planning). The proposed system works in two parts: Online and Offline at the same time; based on five (ML) algorithms: Support Vector Machine (SVM), Decision Tree (DT), K-Nearest Neighbor (KNN), Random Forest (RF), and Naive Bayes (NB). The system offline part applies the stages of pre-processing and classification to the ECR and then predicts what government departments need in the online part. The system chooses the best classification algorithm, which shows perfect results for each government department when online communication is made between the department and the national ID. According to the simulation results of the proposed system, the accuracy of the classifications is around 100%, 99%, and 100% for the military department by the SVM classifier, the social welfare department by the RF classifier, and the statistics-planning department by the SVM classifier, respectively.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dudeck, J., G. Junghans, K. Marquardt, P. Sebald, A. Michel e H. U. Prokosch. "WING – Entering a New Phase of Electronic Data Processing at the Gießen University Hospital". Methods of Information in Medicine 30, n.º 04 (1991): 289–98. http://dx.doi.org/10.1055/s-0038-1634851.

Texto completo da fonte

Resumo:

AbstractAt the Gielßen University Hospital electronic data processing systems have been in routine use since 1975. In the early years developments were focused on ADT functions (admission/discharge/transfer) and laboratory systems. In the next decade additional systems were introduced supporting various functional departments. In the mid-eighties the need to stop the ongoing trend towards more and more separated standalone systems was realized and it was decided to launch a strategic evaluation and planning process which sets the foundation for an integrated hospital information system (HIS). The evaluation of the HELP system for its portability into the German hospital environment was the first step in this process. Despite its recognized capabilities in integrating decision support and communication technologies, and its powerful HIS development tools, the large differences between American and German hospital organization, influencing all existing HELP applications, and the incompatibility of the HELP tools with modern software standards were two important factors forcing the investigation of alternative solutions. With the HELP experience in mind, a HIS concept for the Gießen University Hospital was developed. This new concept centers on the idea of a centralized relational patient database on a highly reliable database server, and clinical front-end applications which might be running on various other computer systems (mainframes, departmental UNIX satellites or PCs in a LAN) integrated into a comprehensive open HIS network. The first step towards this integrated approach was performed with the implementation of ADT and results reporting functions on care units.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Samoylov, P. A. "ELECTRONIC CRIME INCIDENT REPORT AS A REASON TO INITIATE A CRIMINAL CASE (THE COMPARATIVE ANALYSIS OF LEGAL REGULATION IN THE NORMATIVE ACTS OF THE RUSSIAN MINISTRY OF INTERNAL AFFAIRS AND THE RF CRIMINAL PROCEDURE CODE)". Vektor nauki Tol’attinskogo gosudarstvennogo universiteta. Seria Uridicheskie nauki, n.º 2 (2021): 44–50. http://dx.doi.org/10.18323/2220-7457-2021-2-44-50.

Texto completo da fonte

Resumo:

The integration and active application of electronic document flow to the daily activities of the police have consistently and logically led to the fact that the electronic crime incident report is increasingly used as a reason to initiate criminal cases. The departmental normative legal acts of the Ministry of Internal Affairs of Russia regulate in detail the processing of such reports. However, under the RF Criminal Procedure Code, not all electronic crime reports registered by the Departments of Internal Affairs meet the established requirements, and, accordingly, they can not perform the function of a criminal procedural cause. In this situation, with the obvious relevance of electronic documents, an example of a contradiction and gap in the law is evident, which somewhat hinders the development of electronic interaction between the participants of criminal procedural activity and can cause negative consequences. The paper analyzes and compares the provisions of some normative sources regulating the reception and consideration of electronic crime reports by the Departments of Internal Affairs of the Russian Federation and the norms of criminal procedural legislation. The author critically evaluates the legal definitions of the concept of a crime incident report and some organizational and legal mechanisms for accepting and considering electronic crime reports established by the departmental legal acts of the Ministry of Internal Affairs of the Russian Federation. The study highlights and clarifies the rules of filing, mandatory requisites, and some other requirements for electronic crime reports, which must be complied with according to the provisions of the criminal procedure code. Based on the data obtained, the author offers recommendations to improve criminal procedural law and the algorithm of accepting electronic crime reports using the official websites of the Departments of the Ministry of Internal Affairs of the Russian Federation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zavyalov, Aleksandr A., e Dmitry A. Andreev. "Management of the radiotherapy quality control using automated Big Data processing". Health Care of the Russian Federation 64, n.º 6 (30 de dezembro de 2020): 368–72. http://dx.doi.org/10.46563/0044-197x-2020-64-6-368-372.

Texto completo da fonte

Resumo:

Introduction. In Moscow, the state-of-the-art information technologies for cancer care data processing are widely used in routine practice. Data Science approaches are increasingly applied in the field of radiation oncology. Novel arrays of radiotherapy performance indices can be introduced into real-time cancer care quality and safety monitoring. The purpose of the study. The short review of the critical structural elements of automated Big Data processing and its perspectives in the light of the internal quality and safety control organization in radiation oncology departments. Material and methods. The PubMed (Medline) and E-Library databases were used to search the articles published mainly in the last 2-3 years. In total, about 20 reports were selected. Results. This paper highlights the applicability of the next-generation Data Science approaches to quality and safety assurance in radiation oncological units. The structural pillars for automated Big Data processing are considered. Big Data processing technologies can facilitate improvements in quality management at any radiotherapy stage. Simultaneously, the high requirements for quality and integrity across indices in the databases are crucial. Detailed dose data may also be linked to outcomes and survival indices integrated into larger registries. Discussion. Radiotherapy quality control could be automated to some extent through further introduction of information technologies making comparisons of the real-time quality measures with digital targets in terms of minimum norms / standards. The implementation of automated systems generating early electronic notifications and rapid alerts in case of serious quality violation could drastically improve the internal medical processes in local clinics. Conclusion. The role of Big Data tools in internal quality and safety control will dramatically increase over time.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Unwin, Elizabeth, James Codde, Louise Gill, Suzanne Stevens e Timothy Nelson. "The WA Hospital Morbidity Data System: An Evaluation of its Performance and the Impact of Electronic Data Transfer". Health Information Management 26, n.º 4 (dezembro de 1996): 189–92. http://dx.doi.org/10.1177/183335839702600407.

Texto completo da fonte

Resumo:

This paper evaluates the performance of the Hospital Morbidity Data System, maintained by the Health Statistics Branch (HSB) of the Health Department of Western Australia (WA). The time taken to process discharge summaries was compared in the first and second halves of 1995, using the number of weeks taken to process 90% of all discharges and the percentage of records processed within four weeks as indicators of throughput. Both the hospitals and the HSB showed improvements in timeliness during the second half of the year. The paper also examines the impact of a recently introduced electronic data transfer system for WA country public hospitals on the timeliness of morbidity data. The processing time of country hospital records by the HSB was reduced to a similar time as for metropolitan hospitals, but the processing time in the hospitals increased, resulting in little improvement in total processing time.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pan, Chen. "Quality Management System for Clinical Nutrition: On the processing of the Artificial Intelligence into Quality Assessment". Nutrition and Food Processing 04, n.º 03 (26 de maio de 2021): 01–06. http://dx.doi.org/10.31579/2637-8914/038.

Texto completo da fonte

Resumo:

Objective: To critically evaluate the Quality Management System (QMS) for Clinical Nutrition (CN) in Jiangsu. Monitor its performance in quality assessment as well as human resource management from nutrition aspect. Investigate the appliance and development of Artificial Intelligence (AI) in medical quality control. Subjects: The study source of this research was all the staffs of 70 Clinical Nutrition Department (CND) of the tertiary hospitals in Jiangsu Province, China. These departments are all members of the Quality Management System of Clinical Nutrition in Jiangsu (QMSNJ). Methods: An online survey was conducted on all 341 employees within all these CNDs based on the staff information from the surveyed medical institutions. The questionnaire contains 5 aspects, while data analysis and AI evaluation were focused on human resource information. Results: 330 questionnaires were collected with the respondent rate of 96.77%. The QMS for CN has been build up for CNDs in Jiangsu, which achieved its target in human resource improvements, especially among dietitians. The increasing number of participated departments (42.8%) and the significant growth of dietitians (p=0.02, t=-0.42) are all expressions of the advancements of QMSNJ. Conclusion: As the first innovation of an online platform for QM in Jiangsu, JPCNMP has been successfully implemented among QMS from this research. This multidimensional electronic system can help QMSNJ and CND achieve quality assessment from various aspects, so as to realize the continuous improvement of clinical nutrition. The instrument of online platform, as well as AI technology for quality assessment is worth to be recommended and promoted in the future. Strengths This is the first evaluation of the online QM platform after its implementation in daily disciplinary management among the QMS in china. This research has been designed to investigate the status of CND multidimensionally. This analysis is emphasizing on the human resource approvement after the designation and application of QMS. A clearer forecast of AI in medical quality assessment and disciplinary construction was achieved, while some modifications are recommended in human resource management to improve its efficiency and accuracy.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gerner-Smidt, Peter, Lise Hansen, Anna Knudsen, K. Siboni e I. Søgaard. "Epidemic spread of Acinetobacter calcoaceticus in a neurosurgical department analyzed by electronic data processing". Journal of Hospital Infection 6, n.º 2 (junho de 1985): 166–74. http://dx.doi.org/10.1016/s0195-6701(85)80094-3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

GERNERSMIDT, P. "Epidemic spread of Acinetobacter calcoaceticus in a neurosurgical department analyzed by electronic data processing". Journal of Hospital Infection 6, n.º 2 (junho de 1985): 166–74. http://dx.doi.org/10.1016/0195-6701(85)90008-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

MacPhaul, Erin, Li Zhou, Stephen J. Mooney, Deborah Azrael, Andrew Bowen, Ali Rowhani-Rahbar, Ravali Yenduri, Catherine Barber, Eric Goralnick e Matthew Miller. "Classifying Firearm Injury Intent in Electronic Hospital Records Using Natural Language Processing". JAMA Network Open 6, n.º 4 (6 de abril de 2023): e235870. http://dx.doi.org/10.1001/jamanetworkopen.2023.5870.

Texto completo da fonte

Resumo:

ImportanceInternational Classification of Diseases–coded hospital discharge data do not accurately reflect whether firearm injuries were caused by assault, unintentional injury, self-harm, legal intervention, or were of undetermined intent. Applying natural language processing (NLP) and machine learning (ML) techniques to electronic health record (EHR) narrative text could be associated with improved accuracy of firearm injury intent data.ObjectiveTo assess the accuracy with which an ML model identified firearm injury intent.Design, Setting, and ParticipantsA cross-sectional retrospective EHR review was conducted at 3 level I trauma centers, 2 from health care institutions in Boston, Massachusetts, and 1 from Seattle, Washington, between January 1, 2000, and December 31, 2019; data analysis was performed from January 18, 2021, to August 22, 2022. A total of 1915 incident cases of firearm injury in patients presenting to emergency departments at the model development institution and 769 from the external validation institution with a firearm injury code assigned according to International Classification of Diseases, Ninth Revision, Clinical Modification (ICD-9-CM) or International Statistical Classification of Diseases and Related Health Problems, 10th Revision, Clinical Modification (ICD-10-CM), in discharge data were included.ExposuresClassification of firearm injury intent.Main Outcomes and MeasuresIntent classification accuracy by the NLP model was compared with ICD codes assigned by medical record coders in discharge data. The NLP model extracted intent-relevant features from narrative text that were then used by a gradient-boosting classifier to determine the intent of each firearm injury. Classification accuracy was evaluated against intent assigned by the research team. The model was further validated using an external data set.ResultsThe NLP model was evaluated in 381 patients presenting with firearm injury at the model development site (mean [SD] age, 39.2 [13.0] years; 348 [91.3%] men) and 304 patients at the external development site (mean [SD] age, 31.8 [14.8] years; 263 [86.5%] men). The model proved more accurate than medical record coders in assigning intent to firearm injuries at the model development site (accident F-score, 0.78 vs 0.40; assault F-score, 0.90 vs 0.78). The model maintained this improvement on an external validation set from a second institution (accident F-score, 0.64 vs 0.58; assault F-score, 0.88 vs 0.81). While the model showed some degradation between institutions, retraining the model using data from the second institution further improved performance on that site’s records (accident F-score, 0.75; assault F-score, 0.92).Conclusions and RelevanceThe findings of this study suggest that NLP ML can be used to improve the accuracy of firearm injury intent classification compared with ICD-coded discharge data, particularly for cases of accident and assault intents (the most prevalent and commonly misclassified intent types). Future research could refine this model using larger and more diverse data sets.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Electronic data processing departments"

Baxter, David. "Perception of organisational politics and workplace innovation : an investigation of the perceptions and behaviour of staff in an Australian IT services organisation /". Swinburne Research Bank, 2004. http://hdl.handle.net/1959.3/46062.

Texto completo da fonte

Resumo:

Thesis (D.B.A.)--Swinburne University of Technology, Australian Graduate School of Entrepreneurship, 2004.
A thesis submitted to the fulfilment of the requirements for the degree of Doctor of Philosophy, Australian Graduate School of Entrepreneurship, Swinburne University of Technology, 2004. Typescript. Includes bibliographical references (p. 229-230).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Javanshir, Marjan. "DC distribution system for data center". Thesis, Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/hkuto/record/B39344952.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Miles, Shaun Graeme. "An investigation of issues of privacy, anonymity and multi-factor authentication in an open environment". Thesis, Rhodes University, 2012. http://hdl.handle.net/10962/d1006653.

Texto completo da fonte

Resumo:

This thesis performs an investigation into issues concerning the broad area ofIdentity and Access Management, with a focus on open environments. Through literature research the issues of privacy, anonymity and access control are identified. The issue of privacy is an inherent problem due to the nature of the digital network environment. Information can be duplicated and modified regardless of the wishes and intentions ofthe owner of that information unless proper measures are taken to secure the environment. Once information is published or divulged on the network, there is very little way of controlling the subsequent usage of that information. To address this issue a model for privacy is presented that follows the user centric paradigm of meta-identity. The lack of anonymity, where security measures can be thwarted through the observation of the environment, is a concern for users and systems. By an attacker observing the communication channel and monitoring the interactions between users and systems over a long enough period of time, it is possible to infer knowledge about the users and systems. This knowledge is used to build an identity profile of potential victims to be used in subsequent attacks. To address the problem, mechanisms for providing an acceptable level of anonymity while maintaining adequate accountability (from a legal standpoint) are explored. In terms of access control, the inherent weakness of single factor authentication mechanisms is discussed. The typical mechanism is the user-name and password pair, which provides a single point of failure. By increasing the factors used in authentication, the amount of work required to compromise the system increases non-linearly. Within an open network, several aspects hinder wide scale adoption and use of multi-factor authentication schemes, such as token management and the impact on usability. The framework is developed from a Utopian point of view, with the aim of being applicable to many situations as opposed to a single specific domain. The framework incorporates multi-factor authentication over multiple paths using mobile phones and GSM networks, and explores the usefulness of such an approach. The models are in tum analysed, providing a discussion into the assumptions made and the problems faced by each model.
Adobe Acrobat Pro 9.5.1
Adobe Acrobat 9.51 Paper Capture Plug-in

Estilos ABNT, Harvard, Vancouver, APA, etc.

Giesing, Ilse. "User perception related to identification through biometrics within electronic business". Pretoria : [s.n.], 2003. http://upetd.up.ac.za/thesis/available/etd-01092004-141637.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Goss, Ryan Gavin. "Enabling e-learning 2.0 in information security education: a semantic web approach". Thesis, Nelson Mandela Metropolitan University, 2009. http://hdl.handle.net/10948/909.

Texto completo da fonte

Resumo:

The motivation for this study argued that current information security ed- ucation systems are inadequate for educating all users of computer systems world wide in acting securely during their operations with information sys- tems. There is, therefore, a pervasive need for information security knowledge in all aspects of modern life. E-Learning 2.0 could possi- bly contribute to solving this problem, however, little or no knowledge currently exists regarding the suitability and practicality of using such systems to infer information security knowledge to learners.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Perelson, Stephen. "SoDA : a model for the administration of separation of duty requirements in workflow systems". Thesis, Port Elizabeth Technikon, 2001. http://hdl.handle.net/10948/68.

Texto completo da fonte

Resumo:

The increasing reliance on information technology to support business processes has emphasised the need for information security mechanisms. This, however, has resulted in an ever-increasing workload in terms of security administration. Security administration encompasses the activity of ensuring the correct enforcement of access control within an organisation. Access rights and their allocation are dictated by the security policies within an organisation. As such, security administration can be seen as a policybased approach. Policy-based approaches promise to lighten the workload of security administrators. Separation of duties is one of the principles cited as a criterion when setting up these policy-based mechanisms. Different types of separation of duty policies exist. They can be categorised into policies that can be enforced at administration time, viz. static separation of duty requirements and policies that can be enforced only at execution time, viz. dynamic separation of duty requirements. This dissertation deals with the specification of both static separation of duty requirements and dynamic separation of duty requirements in role-based workflow environments. It proposes a model for the specification of separation of duty requirements, the expressions of which are based on set theory. The model focuses, furthermore, on the enforcement of static separation of duty. The enforcement of static separation of duty requirements is modelled in terms of invariant conditions. The invariant conditions specify restrictions upon the elements allowed in the sets representing access control requirements. The sets are themselves expressed as database tables within a relational database management system. Algorithms that stipulate how to verify the additions or deletions of elements within these sets can then be performed within the database management system. A prototype was developed in order to demonstrate the concepts of this model. This prototype helps demonstrate how the proposed model could function and flaunts its effectiveness.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Smith, Michael Alan. "An empirical investigation of the determinants of information systems outsourcing". Diss., Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/29455.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lam, Cheuk-yung. "A case study of IT outsourcing in Hong Kong government /". Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14039023.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bullock, Kenneth F. "Navy Marine Corps Intranet : an analysis of its approach to the challenges associated with seat management contracting". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Jun%5FBullock.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Viljoen, Melanie. "A framework towards effective control in information security governance". Thesis, Nelson Mandela Metropolitan University, 2009. http://hdl.handle.net/10948/887.

Texto completo da fonte

Resumo:

The importance of information in business today has made the need to properly secure this asset evident. Information security has become a responsibility for all managers of an organization. To better support more efficient management of information security, timely information security management information should be made available to all managers. Smaller organizations face special challenges with regard to information security management and reporting due to limited resources (Ross, 2008). This dissertation discusses a Framework for Information Security Management Information (FISMI) that aims to improve the visibility and contribute to better management of information security throughout an organization by enabling the provision of summarized, comprehensive information security management information to all managers in an affordable manner.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Electronic data processing departments"

Gildersleeve, Thomas Robert. Data processing project management. 2^a ed. New York: Van Nostrand Reinhold, 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

McGee, Robert W. Accounting for data processing costs. New York: Quorum Books, 1988.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kenkyūjo, Denki Tsūshin Seisaku Sōgō. Jōhōka ni kansuru keizaigakuteki kenkyū: Soshikinai jōhō katsudō no bunseki. [Tokyo?]: Denki Tsūshin Seisaku Sōgō Kenkyūjo, 1991.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Leeson, Marjorie. Computer operations: Procedures and management. 3^a ed. Chicago: Science Research Associates, 1987.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Denki Tsūshin Seisaku Sōgō Kenkyūjo. Jōhōka ni kansuru keizaigakuteki kenkyū: Sangyō renkanhyō ni yoru bunseki. [Tokyo]: Denki Tsūshin Seisaku Sōgō Kenkyūjo, 1992.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Haufs, Paulo. DV-Controlling: Konzeption eines operativen Instrumentariums aus Budgets, Verrechnungspreisen, Kennzahlen. Heidelberg: Physica, 1989.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

C, Bradley Layne, ed. Handbook of data center management. 2^a ed. Boston: Auerbach Publications, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

W, Clegg Chris, ed. People and computers: How to evaluate your company's new technology. Chichester, West Sussex, England: Ellis Horwood, 1988.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Swift, T. Kevin. Third-party processing: North American market. Norwalk, CT: Business Communications Co., 1997.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Swift, T. Kevin. Third-party processing: North American market. Norwalk, CT: Business Communications Co., 2001.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Electronic data processing departments"

Walsh, Vincent. "Electronic Data Processing". In Computer Literacy, 75–78. London: Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-07674-1_13.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Malley, Brian, Daniele Ramazzotti e Joy Tzung-yu Wu. "Data Pre-processing". In Secondary Analysis of Electronic Health Records, 115–41. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-43742-2_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Younes, Hamoud, Mohamad Alameh, Ali Ibrahim, Mostafa Rizk e Maurizio Valle. "Efficient Algorithms for Embedded Tactile Data Processing". In Electronic Skin, 113–38. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003338062-6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Schuster, Alfons, Simon McCaughey e Roy Sterritt. "From Data to Intelligent Agents, Directions in a Data Intensive Data Processing Project". In Electronic Business and Education, 147–63. Boston, MA: Springer US, 2002. http://dx.doi.org/10.1007/978-1-4615-1497-8_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

de Smit, Jacob. "Electronic Data Processing in Strategic Planning". In Operations Research Proceedings, 256. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-642-73778-7_61.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Osta, Mario, Ali Ibrahim e Maurizio Valle. "Approximate Arithmetic Circuits for Energy Efficient Data Processing in Electronic Skin". In Electronic Skin, 139–61. New York: River Publishers, 2022. http://dx.doi.org/10.1201/9781003338062-7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Engel, Robert, Worarat Krathu, Marco Zapletal, Christian Pichler, Wil M. P. van der Aalst e Hannes Werthner. "Process Mining for Electronic Data Interchange". In Lecture Notes in Business Information Processing, 77–88. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-23014-1_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ibrahim, Ali, Luca Noli, Hussein Chible e Maurizio Valle. "Embedded Electronic Systems for Tactile Data Processing". In Lecture Notes in Electrical Engineering, 17–23. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-47913-2_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Härder, Theo, e Norbert Ritter. "Transaction-Based Design Data Processing in the PRIMA Framework". In Electronic Design Automation Frameworks, 3–12. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-0-387-34880-3_1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Srivastava, Samarth, Oshi Varma e M. Gayathri. "Electronic Invoicing Using Image Processing and NLP". In Innovative Data Communication Technologies and Application, 843–56. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7167-8_62.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Electronic data processing departments"

Lee, JeongHun, e OkSam Chae. "Multimedia data processing algorithm development environment (MADE)". In Electronic Imaging '99, editado por Robert F. Erbacher, Philip C. Chen e Craig M. Wittenbrink. SPIE, 1999. http://dx.doi.org/10.1117/12.342835.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Tian, Bing, e Kun Liu. "Electronic Map Data Processing and Optimization". In 2010 International Conference on E-Product E-Service and E-Entertainment (ICEEE 2010). IEEE, 2010. http://dx.doi.org/10.1109/iceee.2010.5661625.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Spalević, Žaklina, Miloš Ilić e Petar Spalević. "Electronic monitoring devices and data processing". In Synthesis 2015. Belgrade, Serbia: Singidunum University, 2015. http://dx.doi.org/10.15308/synthesis-2015-242-247.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sitnik, Robert, Artur Filipczak, Marcin Witkowski, Walter Rapp e Bart Haex. "4D data processing for dynamic human body analysis". In Electronic Imaging 2006, editado por Brian D. Corner, Peng Li e Matthew Tocheri. SPIE, 2006. http://dx.doi.org/10.1117/12.643213.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kim, Hyeokman, Sung-Joon Park, Jinho Lee, Woonkyung M. Kim e Samuel M. Song. "Processing of partial video data for detection of wipes". In Electronic Imaging '99, editado por Minerva M. Yeung, Boon-Lock Yeo e Charles A. Bouman. SPIE, 1998. http://dx.doi.org/10.1117/12.333847.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Raman, Rajeev. "Image processing data flow in digital cameras". In Photonics West '98 Electronic Imaging, editado por George M. Williams, Jr. SPIE, 1998. http://dx.doi.org/10.1117/12.304589.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Goczkowski, J., T. Kocman, P. Kolenderski e R. Siemiński. "Self-Calibrating Electronic Controller for Satellite Quantum Entanglement Source". In 2023 European Data Handling & Data Processing Conference (EDHPC). IEEE, 2023. http://dx.doi.org/10.23919/edhpc59100.2023.10396310.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Turaga, Deepak S., e Krishna Ratakonda. "Parallel processing of multi-dimensional data with causal neighborhood dependencies". In Electronic Imaging 2008, editado por William A. Pearlman, John W. Woods e Ligang Lu. SPIE, 2008. http://dx.doi.org/10.1117/12.766977.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sitnik, Robert, Maciej Karaszewski, Wojciech Załuski e Jan Rutkiewicz. "Automation of 3D scan data capturing and processing". In IS&T/SPIE Electronic Imaging, editado por Atilla M. Baskurt. SPIE, 2010. http://dx.doi.org/10.1117/12.839189.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chamchong, Rapeeporn, Yuttapong Rangsanseri e Punya Thitimajshima. "Data extraction in form documents with gray-level background using morphological processing". In Electronic Imaging, editado por Daniel P. Lopresti e Jiangying Zhou. SPIE, 1999. http://dx.doi.org/10.1117/12.373484.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Electronic data processing departments"

Overberg, Mark E., Kent Martin Geib, Darwin Keith Serkland, Alan Yuan-Chun Hsu, Gordon Arthur Keeler e Patrick Sean Finnegan. Electronic/photonic interfaces for ultrafast data processing. Office of Scientific and Technical Information (OSTI), setembro de 2008. http://dx.doi.org/10.2172/940521.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Borgwardt, Stefan, Walter Forkel e Alisa Kovtunova. Finding New Diamonds: Temporal Minimal-World Query Answering over Sparse ABoxes. Technische Universität Dresden, 2019. http://dx.doi.org/10.25368/2023.223.

Texto completo da fonte

Resumo:

Lightweight temporal ontology languages have become a very active field of research in recent years. Many real-world applications, like processing electronic health records (EHRs), inherently contain a temporal dimension, and require efficient reasoning algorithms. Moreover, since medical data is not recorded on a regular basis, reasoners must deal with sparse data with potentially large temporal gaps. In this paper, we introduce a temporal extension of the tractable language ELH⊥, which features a new class of convex diamond operators that can be used to bridge temporal gaps. We develop a completion algorithm for our logic, which shows that entailment remains tractable. Based on this, we develop a minimal-world semantics for answering metric temporal conjunctive queries with negation. We show that query answering is combined first-order rewritable, and hence in polynomial time in data complexity.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Engel, Bernard, Yael Edan, James Simon, Hanoch Pasternak e Shimon Edelman. Neural Networks for Quality Sorting of Agricultural Produce. United States Department of Agriculture, julho de 1996. http://dx.doi.org/10.32747/1996.7613033.bard.

Texto completo da fonte

Resumo:

The objectives of this project were to develop procedures and models, based on neural networks, for quality sorting of agricultural produce. Two research teams, one in Purdue University and the other in Israel, coordinated their research efforts on different aspects of each objective utilizing both melons and tomatoes as case studies. At Purdue: An expert system was developed to measure variances in human grading. Data were acquired from eight sensors: vision, two firmness sensors (destructive and nondestructive), chlorophyll from fluorescence, color sensor, electronic sniffer for odor detection, refractometer and a scale (mass). Data were analyzed and provided input for five classification models. Chlorophyll from fluorescence was found to give the best estimation for ripeness stage while the combination of machine vision and firmness from impact performed best for quality sorting. A new algorithm was developed to estimate and minimize training size for supervised classification. A new criteria was established to choose a training set such that a recurrent auto-associative memory neural network is stabilized. Moreover, this method provides for rapid and accurate updating of the classifier over growing seasons, production environments and cultivars. Different classification approaches (parametric and non-parametric) for grading were examined. Statistical methods were found to be as accurate as neural networks in grading. Classification models by voting did not enhance the classification significantly. A hybrid model that incorporated heuristic rules and either a numerical classifier or neural network was found to be superior in classification accuracy with half the required processing of solely the numerical classifier or neural network. In Israel: A multi-sensing approach utilizing non-destructive sensors was developed. Shape, color, stem identification, surface defects and bruises were measured using a color image processing system. Flavor parameters (sugar, acidity, volatiles) and ripeness were measured using a near-infrared system and an electronic sniffer. Mechanical properties were measured using three sensors: drop impact, resonance frequency and cyclic deformation. Classification algorithms for quality sorting of fruit based on multi-sensory data were developed and implemented. The algorithms included a dynamic artificial neural network, a back propagation neural network and multiple linear regression. Results indicated that classification based on multiple sensors may be applied in real-time sorting and can improve overall classification. Advanced image processing algorithms were developed for shape determination, bruise and stem identification and general color and color homogeneity. An unsupervised method was developed to extract necessary vision features. The primary advantage of the algorithms developed is their ability to learn to determine the visual quality of almost any fruit or vegetable with no need for specific modification and no a-priori knowledge. Moreover, since there is no assumption as to the type of blemish to be characterized, the algorithm is capable of distinguishing between stems and bruises. This enables sorting of fruit without knowing the fruits' orientation. A new algorithm for on-line clustering of data was developed. The algorithm's adaptability is designed to overcome some of the difficulties encountered when incrementally clustering sparse data and preserves information even with memory constraints. Large quantities of data (many images) of high dimensionality (due to multiple sensors) and new information arriving incrementally (a function of the temporal dynamics of any natural process) can now be processed. Furhermore, since the learning is done on-line, it can be implemented in real-time. The methodology developed was tested to determine external quality of tomatoes based on visual information. An improved model for color sorting which is stable and does not require recalibration for each season was developed for color determination. Excellent classification results were obtained for both color and firmness classification. Results indicted that maturity classification can be obtained using a drop-impact and a vision sensor in order to predict the storability and marketing of harvested fruits. In conclusion: We have been able to define quantitatively the critical parameters in the quality sorting and grading of both fresh market cantaloupes and tomatoes. We have been able to accomplish this using nondestructive measurements and in a manner consistent with expert human grading and in accordance with market acceptance. This research constructed and used large databases of both commodities, for comparative evaluation and optimization of expert system, statistical and/or neural network models. The models developed in this research were successfully tested, and should be applicable to a wide range of other fruits and vegetables. These findings are valuable for the development of on-line grading and sorting of agricultural produce through the incorporation of multiple measurement inputs that rapidly define quality in an automated manner, and in a manner consistent with the human graders and inspectors.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Avis, William. Drivers, Barriers and Opportunities of E-waste Management in Africa. Institute of Development Studies (IDS), dezembro de 2021. http://dx.doi.org/10.19088/k4d.2022.016.

Texto completo da fonte

Resumo:

Population growth, increasing prosperity and changing consumer habits globally are increasing demand for consumer electronics. Further to this, rapid changes in technology, falling prices and consumer appetite for better products have exacerbated e-waste management challenges and seen millions of tons of electronic devices become obsolete. This rapid literature review collates evidence from academic, policy focussed and grey literature on e-waste management in Africa. This report provides an overview of constitutes e-waste, the environmental and health impacts of e-waste, of the barriers to effective e-waste management, the opportunities associated with effective e-waste management and of the limited literature available that estimate future volumes of e-waste. Africa generated a total of 2.9 million Mt of e-waste, or 2.5 kg per capita, the lowest regional rate in the world. Africa’s e-waste is the product of Local and imported Sources of Used Electronic and Electrical Equipment (UEEE). Challenges in e-waste management in Africa are exacerbated by a lack of awareness, environmental legislation and limited financial resources. Proper disposal of e-waste requires training and investment in recycling and management technology as improper processing can have severe environmental and health effects. In Africa, thirteen countries have been identified as having a national e-waste legislation/policy.. The main barriers to effective e-waste management include: Insufficient legislative frameworks and government agencies’ lack of capacity to enforce regulations, Infrastructure, Operating standards and transparency, illegal imports, Security, Data gaps, Trust, Informality and Costs. Aspirations associated with energy transition and net zero are laudable, products associated with these goals can become major contributors to the e-waste challenge. The necessary wind turbines, solar panels, electric car batteries, and other "green" technologies require vast amounts of resources. Further to this, at the end of their lifetime, they can pose environmental hazards. An example of e-waste associated with energy transitions can be gleaned from the solar power sector. Different types of solar power cells need to undergo different treatments (mechanical, thermal, chemical) depending on type to recover the valuable metals contained. Similar issues apply to waste associated with other energy transition technologies. Although e-waste contains toxic and hazardous metals such as barium and mercury among others, it also contains non-ferrous metals such as copper, aluminium and precious metals such as gold and copper, which if recycled could have a value exceeding 55 billion euros. There thus exists an opportunity to convert existing e-waste challenges into an economic opportunity.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Modlo, Yevhenii O., Serhiy O. Semerikov, Stanislav L. Bondarevskyi, Stanislav T. Tolmachev, Oksana M. Markova e Pavlo P. Nechypurenko. Methods of using mobile Internet devices in the formation of the general scientific component of bachelor in electromechanics competency in modeling of technical objects. [б. в.], fevereiro de 2020. http://dx.doi.org/10.31812/123456789/3677.

Texto completo da fonte

Resumo:

An analysis of the experience of professional training bachelors of electromechanics in Ukraine and abroad made it possible to determine that one of the leading trends in its modernization is the synergistic integration of various engineering branches (mechanical, electrical, electronic engineering and automation) in mechatronics for the purpose of design, manufacture, operation and maintenance electromechanical equipment. Teaching mechatronics provides for the meaningful integration of various disciplines of professional and practical training bachelors of electromechanics based on the concept of modeling and technological integration of various organizational forms and teaching methods based on the concept of mobility. Within this approach, the leading learning tools of bachelors of electromechanics are mobile Internet devices (MID) – a multimedia mobile devices that provide wireless access to information and communication Internet services for collecting, organizing, storing, processing, transmitting, presenting all kinds of messages and data. The authors reveals the main possibilities of using MID in learning to ensure equal access to education, personalized learning, instant feedback and evaluating learning outcomes, mobile learning, productive use of time spent in classrooms, creating mobile learning communities, support situated learning, development of continuous seamless learning, ensuring the gap between formal and informal learning, minimize educational disruption in conflict and disaster areas, assist learners with disabilities, improve the quality of the communication and the management of institution, and maximize the cost-efficiency. Bachelor of electromechanics competency in modeling of technical objects is a personal and vocational ability, which includes a system of knowledge, skills, experience in learning and research activities on modeling mechatronic systems and a positive value attitude towards it; bachelor of electromechanics should be ready and able to use methods and software/hardware modeling tools for processes analyzes, systems synthesis, evaluating their reliability and effectiveness for solving practical problems in professional field. The competency structure of the bachelor of electromechanics in the modeling of technical objects is reflected in three groups of competencies: general scientific, general professional and specialized professional. The implementation of the technique of using MID in learning bachelors of electromechanics in modeling of technical objects is the appropriate methodic of using, the component of which is partial methods for using MID in the formation of the general scientific component of the bachelor of electromechanics competency in modeling of technical objects, are disclosed by example academic disciplines “Higher mathematics”, “Computers and programming”, “Engineering mechanics”, “Electrical machines”. The leading tools of formation of the general scientific component of bachelor in electromechanics competency in modeling of technical objects are augmented reality mobile tools (to visualize the objects’ structure and modeling results), mobile computer mathematical systems (universal tools used at all stages of modeling learning), cloud based spreadsheets (as modeling tools) and text editors (to make the program description of model), mobile computer-aided design systems (to create and view the physical properties of models of technical objects) and mobile communication tools (to organize a joint activity in modeling).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Electronic Data Processing, Accounting Department Head Office - Staff at work - 1965. Reserve Bank of Australia, setembro de 2022. http://dx.doi.org/10.47688/rba_archives_pn-002490.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

The Bank at Work - Head Office - Accounting Department - Electronic Data Processing (EDP) Section - January 1972. Reserve Bank of Australia, setembro de 2022. http://dx.doi.org/10.47688/rba_archives_pn-007426.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Research Department - Miscellaneous Correspondence - Memoranda (books, stores) - (EDP) Electronic Data Processing - File 1 - 1956 - 1962. Reserve Bank of Australia, setembro de 2023. http://dx.doi.org/10.47688/rba_archives_2006/18628.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Research Department - Miscellaneous Correspondence - Memoranda (books, stores) - (EDP) Electronic Data Processing - File 2 - 1956 - 1962. Reserve Bank of Australia, setembro de 2023. http://dx.doi.org/10.47688/rba_archives_2006/18630.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!