Literatura científica selecionada sobre o tema "Effects of process parameters on microstructure and texture"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Effects of process parameters on microstructure and texture".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Effects of process parameters on microstructure and texture"
Fischer, Tim, Leonhard Hitzler e Ewald Werner. "Morphological and Crystallographic Effects in the Laser Powder-Bed Fused Stainless Steel Microstructure". Crystals 11, n.º 6 (10 de junho de 2021): 672. http://dx.doi.org/10.3390/cryst11060672.
Texto completo da fonteKosović, Indira, Indira Kosović, Mirta Benšić, Mirta Benšić, Đurđica Ačkar, Đurđica Ačkar, Antun Jozinović et al. "Microstructure and cooking quality of barley-enriched pasta produced at different process parameters". Foods and Raw Materials 6, n.º 2 (20 de dezembro de 2018): 281–90. http://dx.doi.org/10.21603/2308-4057-2018-2-281-290.
Texto completo da fonteChen, Zhen, Pei Wei, Hanfeng Chen, Xinggang Chen, Yi Ruan, Wenzheng Zhou e Sujun Lu. "Laser Powder Bed Fusion of K418 Superalloy: Process, Microstructure, Texture Feature, and Mechanical Property". Metals 12, n.º 4 (1 de abril de 2022): 611. http://dx.doi.org/10.3390/met12040611.
Texto completo da fonteBai, Lin Rui, Guo Min Le, Jin Feng Li, Xue Liu e Xiu Yan Li. "Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys". Materials Science Forum 913 (fevereiro de 2018): 227–34. http://dx.doi.org/10.4028/www.scientific.net/msf.913.227.
Texto completo da fonteBhale, Pranav, Pnina Ari-Gur, Ronald D. Noebe, Yang Ren, Amila Madiligama, Ranjith Devaraj e Matthew S. Cook. "Effect of Melt-Spinning Parameters on the Structure and Properties of Ni55.5Mn18.8Ga24Si1.7 Heusler Alloy Ribbons". Materials 16, n.º 19 (7 de outubro de 2023): 6590. http://dx.doi.org/10.3390/ma16196590.
Texto completo da fonteMerchant, N., J. S. Luo, V. A. Maroni, D. M. Gruen, B. S. Tani, S. Sinha, K. H. Sandhage e C. A. Craven. "Epitaxial growth of YbBa2Cu3O7−δ films on (100)-oriented MgO and SrTiO3 substrates by oxidation of a liquid alloy precursor". Journal of Materials Research 7, n.º 10 (outubro de 1992): 2680–88. http://dx.doi.org/10.1557/jmr.1992.2680.
Texto completo da fonteTing, Valentina J. L., Pat Silcock, Franco Biasioli e Phil Bremer. "The Physical and Structural Effects of 1-MCP on Four Different Apple Cultivars during Storage". Foods 12, n.º 22 (7 de novembro de 2023): 4050. http://dx.doi.org/10.3390/foods12224050.
Texto completo da fonteCho, Hae Seok, Min Hong Kim e Hyeong Joon Kim. "Preferred orientation and microstructure of Ni-Zn-Cu ferrite thin films deposited by rf magnetron sputtering". Journal of Materials Research 9, n.º 9 (setembro de 1994): 2425–33. http://dx.doi.org/10.1557/jmr.1994.2425.
Texto completo da fonteMandal, G., S. K. Ghosh, D. Chakrabarti e S. Chatterjee. "Effects of Thermo-mechanical Process Parameters on Microstructure and Crystallographic Texture of High Ni–Mo Ultrahigh Strength Steel". Metallography, Microstructure, and Analysis 7, n.º 2 (26 de fevereiro de 2018): 222–38. http://dx.doi.org/10.1007/s13632-018-0432-7.
Texto completo da fonteGu, Yao Xin, e Hong Chao Qiao. "Study of Laser Peening on TiAl Alloy Properties with Different Parameters". Advanced Materials Research 1089 (janeiro de 2015): 359–64. http://dx.doi.org/10.4028/www.scientific.net/amr.1089.359.
Texto completo da fonteTeses / dissertações sobre o assunto "Effects of process parameters on microstructure and texture"
Sojiphan, Kittichai. "Effects of Very High Power Ultrasonic Additive Manufacturing Process Parameters on Hardness, Microstructure, and Texture of Aluminum 3003-H18 Alloy". The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1418667794.
Texto completo da fonteThomas, Matthew James. "The effect of thermomechanical process parameters on the microstructure and crystallographic texture evolution of near-α aerospace alloy Timetal®834". Thesis, University of Sheffield, 2007. http://etheses.whiterose.ac.uk/15126/.
Texto completo da fonteKhabouchi, Amal. "Microstructure, texture et propagation des ondes ultrasonores dans un superalliage à base de nickel fait par fabrication additive". Electronic Thesis or Diss., Université de Lorraine, 2021. https://docnum.univ-lorraine.fr/public/DDOC_T_2021_0349_KHABOUCHI.pdf.
Texto completo da fonteAdditive Manufacturing is a revolutionary industrial technique that has attracted increasing interest since the late 1980s and is gradually beginning to replace conventional manufacturing processes, and even to open horizons for the creation of new types of materials. This importance is attributed to it thanks to several specificities, namely the almost infinite possibility of building parts with complex geometries and the possibility of mixing several types of powders with different chemical compositions to obtain materials with well-defined properties depending on the final applications. These materials are often referred to as functionally graded materials. Additive manufacturing is even used to build composite materials. It is now used in almost all industrial fields: aerospace, medical, automotive and electronic components. The extension of additive manufacturing to metal alloys is even more recent. Over the past 20 years, many metal additive manufacturing processes have been developed. Examples include laser powder bed fusion (called SLM or L-PBF), direct additive laser construction (CLAD), selective laser sintering (SLS), etc... Although that it is a very promising technique, additive manufacturing, especially the metallic one, is still poorly controlled. Considerable technological work has been done to optimise the manufacturing parameters and improve the properties, particularly mechanical ones, of the parts produced. However, to fully use the advantages of the technique, a major research effort remains to be made to fully understand and control the fine mechanisms involved in the processes. As a result, the scientific community is currently very active in this field and the publications are very numerous. From a metallurgical point of view, two points seem to be important for the mechanical strength of the parts. On one hand, the presence of porosities, in a greater or lesser proportion, in the deposited material, which can le ad to a decrease in its resistance. On the other hand, the crystalline texturing inherent in the process used, which results in an anisotropic mechanical behaviour. The work of this thesis is in this context. It was conducted as part of a collaboration between the LEM3 in Metz and CEA-LIST in Saclay, integrated within a wider program of research and innovation joining CEA-Tech Lorraine and the Region of Lorraine. The CEA-LIST is specialized -among other things- in the development of non-destructive control methods (NDT) to detect the presence of defects in metal parts. LEM3 has particular competence in quantifying and understanding the crystalline textures of metal alloys related to their elaboration conditions. From a scientific point of view, the objectives of the thesis were twofold: on the one hand, our objective was to improve our understanding of the genesis of crystalline textures during the deposit of a metal alloy by SLM; On the other hand, we aim to evaluate the consequenc es of these textures on the propagation of the ultrasound waves which are traditionally used in CND. From a more practical point of view, the question that arose at the beginning of the thesis was: does the elastic anisotropy of propagation of ultrasound linked to the crystalline texturing produced by the SLM process require a review of the protocol of non-destructive control by ultrasound?
Simonelli, Marco. "Microstructure evolution and mechanical properties of selective laser melted Ti-6Al-4V". Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/15070.
Texto completo da fonteAntonysamy, Alphons Anandaraj. "Microstructure, texture and mechanical property evolution during additive manufacturing of Ti6Al4V alloy for aerospace applications". Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/microstructure-texture-and-mechanical-property-evolution-during-additive-manufacturing-of-ti6al4v-alloy-for-aerospace-applications(03c4d403-822a-4bfd-a0f8-ef49eb65e7a0).html.
Texto completo da fonteCapítulos de livros sobre o assunto "Effects of process parameters on microstructure and texture"
Huang, Shiyao, Mei Li, John E. Allison, Shaorui Zhang, Dayong Li e Yinghong Peng. "Effects of Direct Extrusion Process on Microstructure, Texture Evolution and Yield Strength of Magnesium Alloy AZ31". In Magnesium Technology 2012, 349–54. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48203-3_64.
Texto completo da fonteHuang, Shiyao, Mei Li, John E. Allison, Shaorui Zhang, Dayong Li e Yinghong Peng. "Effects of Direct Extrusion Process on Microstructure, Texture Evolution and Yield Strength of Magnesium Alloy AZ31". In Magnesium Technology 2012, 349–54. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118359228.ch64.
Texto completo da fonteNienaber, Maria, Nabil Safieh, Jan Bohlen e Noomane Ben Khalifa. "Influence of Process Parameters and Die Design on the Microstructure and Texture Development of Direct Extruded Magnesium Flat Products". In Lecture Notes in Mechanical Engineering, 511–21. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-41023-9_52.
Texto completo da fonteWang, Huihui, Wanlin Wang, Hualong Li, Peisheng Lyu, Shengjie Wu, Xueying Lyu, Lulu Song e Yunli Zhang. "Effects of Normalization Process on Microstructure and Texture of Non-oriented Electrical Steel Produced by Ultra-Thin Strip Casting". In The Minerals, Metals & Materials Series, 875–83. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-22524-6_81.
Texto completo da fonteMarchese, Giulio, Massimo Lorusso, Flaviana Calignano, Elisa Paola Ambrosio, Diego Manfredi, Matteo Pavese, Sara Biamino, Daniele Ugues, Paolo Fino e Paolo Fino. "Inconel 625 by Direct Metal Laser Sintering: Effects of the Process Parameters and Heat Treatments on Microstructure and Hardness". In Superalloys 2016, 1011–20. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119075646.ch107.
Texto completo da fonteKumar, Manoj. "Modeling and Simulation of Surface Texture for End-Milling Process". In Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, 19–39. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2440-3.ch002.
Texto completo da fonteDeğirmenci, Ünal. "Investigation of the Effects of Different Cooling/Lubrication Conditions and Cutting Parameters on Energy Consumption During Milling of Hybrid Aluminum Composites". In Interdisciplinary Studies on Contemporary Research Practices in Engineering in the 21st Century II. Özgür Yayınları, 2023. http://dx.doi.org/10.58830/ozgur.pub95.c438.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Effects of process parameters on microstructure and texture"
Zhao, Man, e Steven Y. Liang. "Modeling of Residual Stress in Micro-Grinding Considering Texture Effect". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69724.
Texto completo da fonteBorisov, Y., S. Voynarovych, A. Kislitsa, A. Borisova, M. Karpetz e A. Tunik. "Effect of Microplasma Spray Conditions on Structure, Phase Composition and Texture of Hydroxyapatite Coatings". In ITSC2006, editado por B. R. Marple, M. M. Hyland, Y. C. Lau, R. S. Lima e J. Voyer. ASM International, 2006. http://dx.doi.org/10.31399/asm.cp.itsc2006p0029.
Texto completo da fonteRodriguez, Manuel Aurelio, e Paris von Lockette. "PDF Evolution of Texture in the Fabrication of Magneto-Active Elastomers". In ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3868.
Texto completo da fonteYi, Youping, Yan Shi, Jihui Yang e Yongcheng Lin. "Effects of Forging Process Parameters on Microstructure Evolution of Aluminum Alloy 7050". In 10TH ESAFORM CONFERENCE ON MATERIAL FORMING. AIP, 2007. http://dx.doi.org/10.1063/1.2729559.
Texto completo da fonteWYNN, MATHEW, e NAVID ZOBEIRY. "A FAST METHOD FOR EVALUATING EFFECTS OF PROCESS PARAMETERS ON MORPHOLOGY OF SEMI-CRYSTALLINE THERMOPLASTIC COMPOSITES". In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35919.
Texto completo da fonteToma, Filofteia-Laura, Stefan Scheitz, Richard Trache, Stefan Langner, Christoph Leyens, Annegret Potthoff e Kathrin Oelschlägel. "Effect of Feedstock Characteristics and Operating Parameters on the Properties of Cr2O3 Coatings Prepared by Suspension-HVOF Spraying". In ITSC2015, editado por A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen e C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0329.
Texto completo da fonteWang, Zhiyu, Christopher Saldana e Saurabh Basu. "Subsurface Microstructure and Crystallographic Texture in Surface Severe Plastic Deformation Processes". In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2915.
Texto completo da fonteAlimardani, Masoud, Mehrdad Iravani Tabrizipour e Amir Khajepour. "Effects of Process Parameters on Surface Finish in Laser Solid Freeform Fabrication". In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11612.
Texto completo da fonteShu, Xuedao, Jitai Wang, Sutao Han e Yilun Wei. "Effect of Process Parameters on the Microstructure of Closed-Open Cross Wedge Rolling". In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-69787.
Texto completo da fonteAmbrosio, E., S. Biamino, F. Calignano, P. Fino, M. Lorusso, D. Manfredi, G. Marchese, M. Pavese e D. Ugues. "Inconel 625 by Direct Metal Laser Sintering: Effects of the Process Parameters and Heat Treatments on Microstructure and Hardness". In Superalloys 2016. The Minerals, Metals & Materials Society, 2016. http://dx.doi.org/10.7449/superalloys/2016/superalloys_2016_1013_1020.
Texto completo da fonte