Artigos de revistas: "Eco-Manufacturing"

1

Dimitrov, Roumen. "Promoting eco manufacturing: an Australian case". Journal of Public Affairs 8, n.º 4 (novembro de 2008): 233–47. http://dx.doi.org/10.1002/pa.298.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Meutia, Inten, Marini Ramadhani e Mohamad Adam. "Does Eco-Efficiency Improve Financial Performance of Manufacturing Companies in Indonesia?" Jurnal Dinamika Akuntansi dan Bisnis 6, n.º 2 (2 de outubro de 2019): 137–50. http://dx.doi.org/10.24815/jdab.v6i2.13785.

Texto completo da fonte

Resumo:

This study aims to determine the impact of environmental performance proxied by eco-efficiency on the financial performance of manufacturing companies in Indonesia. İn this study, the multiple linear regression test was used to analyse the data. The sample of this study is manufacturing companies that listed at the Indonesia Stock Exchange from 2012 until 2016 with the total observation is 80 firm-years.The results of this study indicated that the average level of eco-efficiency of the manufacturing companies is still relatively low (0.38). The environmental performance as measured by the eco-efficiency has a positive significant effect on the financial performance of the companies. Therefore, this study suggests that companies can improve their financial performance by enhancing their eco-efficiency level.This study aims to determine the impact of environmental performance proxied by eco-efficiency on the financial performance of manufacturing companies in Indonesia. İn this study, the multiple linear regression test was used to analyse the data. The sample of this study is manufacturing companies that listed at the Indonesia Stock Exchange from 2012 until 2016 with the total observation is 80 firm-years.The results of this study indicated that the average level of eco-efficiency of the manufacturing companies is still relatively low (0.38). The environmental performance as measured by the eco-efficiency has a positive significant effect on the financial performance of the companies. Therefore, this study suggests that companies can improve their financial performance by enhancing their eco-efficiency level.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Singhal, Tejendra Singh, Jinesh Kumar Jain, D. Atchuta Ramacharyulu, Alok Jain, Dalael Saad Abdul-Zahra, Manjunatha e Arun Pratap Srivastava. "Eco-Design of Products and Processes: A Review on Principles and Tools for Sustainable Manufacturing". E3S Web of Conferences 505 (2024): 01033. http://dx.doi.org/10.1051/e3sconf/202450501033.

Texto completo da fonte

Resumo:

Eco-design is a crucial approach in achieving sustainable manufacturing, which seeks to reduce the environmental impact of products and processes throughout their lifecycle. This paper explores the principles and tools that are used in eco-design, providing an overview of the key concepts and methods for sustainable manufacturing. The principles of eco-design are centered on minimizing the environmental impact of products and processes through the use of renewable resources, reducing waste and emissions, and improving energy and material efficiency. The paper discusses these principles in detail and highlights the benefits that can be achieved by implementing eco-design in manufacturing. The tools and methods of eco-design include life cycle assessment (LCA), design for environment (DfE), and environmental management systems (EMS) whereas DfE involves designing products and processes to minimize their environmental impact. EMS provides a framework for managing environmental performance across an organization. The paper also discusses the challenges of implementing eco-design in manufacturing, including the need for collaboration across different functions within an organization, the availability of data and resources, and the complexity of the supply chain. Organizations can implement eco design by utilizing Life Cycle Assessment, eco-labeling, and Design for the Environment. This approach can help organizations initiate or improve sustainable production practices.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Zulkiffli, Siti Nur ‘Atikah, Nur Farah Zafira Zaidi, Siti Falindah Padlee e Najahul Kamilah Aminy Sukri. "Eco-Innovation Capabilities and Sustainable Business Performance during the COVID-19 Pandemic". Sustainability 14, n.º 13 (21 de junho de 2022): 7525. http://dx.doi.org/10.3390/su14137525.

Texto completo da fonte

Resumo:

The COVID-19 pandemic has had a direct impact on the manufacturing industry in Malaysia because all economic activities had to be suspended for some time. This study explores the role that eco-innovation capabilities might play in improving sustainable business performance during the ongoing pandemic. This study employs a quantitative method by distributing online questionnaires to 80 small and medium enterprises (SMEs) in Klang Valley, Malaysia. In the study, the relationship between sustainable business performance and the three variables of eco-innovation capabilities, i.e., eco-product innovation, eco-management innovation and eco-logistic innovation, were determined using multiple regression analysis. The results indicate that two hypotheses are accepted and the other one is rejected. The findings indicate that most manufacturing SMEs in Klang Valley have adopted eco-management innovation and eco-logistic innovation as crucial capabilities for their businesses during the pandemic. However, due to the challenges faced by these SMEs during the pandemic, eco-product innovation was found to have an insignificant relationship with sustainable business performance. It is insignificant because of the low productivity rate observed during the pandemic. Hence, the COVID-19 pandemic has caused manufacturing SMEs in the Klang Valley to not be able to maintain their operations and stay on track. Therefore, this research may contribute to the efforts of policymakers, government agencies and managers of manufacturing SMEs in developing a strong innovation platform on which manufacturing SMEs may rely for support in enhancing their business capacity and performance.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Abdullah, Ziyad Tariq, Guo Shunsheng e Sheng Buyun. "Eco-Design Application to Drive Sustainable Manufacturing". Advanced Science Letters 21, n.º 12 (1 de dezembro de 2015): 3610–14. http://dx.doi.org/10.1166/asl.2015.6561.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Sun, Mei, Ying Ru, Chun Xiao Li e Yong Chao Sun. "Proposal of Eco Design for Chinese Manufacturing". Applied Mechanics and Materials 496-500 (janeiro de 2014): 2707–10. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.2707.

Texto completo da fonte

Resumo:

Export value took more than half of GDP in average from 2007 to 2011. In recent years, Nations issued a large amount of environment standards; as a result, Chinese exported products suffered recall in main target nation of export because product did not meet requirement of eco-design. In China, small and medium-sized enterprises took more than half of total enterprise in manufacturing. For small and medium-sized enterprises, it is difficult to know well about all environment standards in world. This paper draw proposal for the development of Chinese manufacturing.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Gutowski, Timothy G. "The efficiency and eco-efficiency of manufacturing". International Journal of Nanomanufacturing 6, n.º 1/2/3/4 (2010): 38. http://dx.doi.org/10.1504/ijnm.2010.034770.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Horta, J. F., F. J. P. Simões e A. Mateus. "Large scale additive manufacturing of eco-composites". International Journal of Material Forming 11, n.º 3 (22 de junho de 2017): 375–80. http://dx.doi.org/10.1007/s12289-017-1364-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Yang, Qin, e Lin Sun. "Eco-Design in Manufacturing or Remanufacturing? The Sustainable Options in a Closed-Loop Supply Chain with Outsourcing". Sustainability 16, n.º 4 (16 de fevereiro de 2024): 1633. http://dx.doi.org/10.3390/su16041633.

Texto completo da fonte

Resumo:

Here, the authors focused on determining the increase in consumers’ preferences for sustainable products, including that of OEMs, who are responsible for the drop in new product sales. We also assessed the effects of remanufacturing by outsourcing to third-party remanufacturers. However, the outsourcing of remanufacturing not only enables the producer to offer a remanufactured product at the same time as manufacturing new units; it also provides OEMs with the flexibility required to peruse eco-design in manufacturing and/or remanufacturing. For instance, Gree and Midea have heavily invested in eco-design to reduce energy costs in manufacturing, while Xerox has adopted a modular design approach to divert materials away from landfills and towards remanufacturing. Following observations of real-world applications, the authors developed two theoretical models in which remanufacturing can be outsourced to an independent remanufacturer, endowing the OEM with the flexibility required to enact eco-design in manufacturing or remanufacturing. This analysis reveals that OEMs tend to put more effort into eco-design in manufacturing than in remanufacturing. Furthermore, such efforts in the name of eco-design may be beneficial for both the OEM and the third-party remanufacturer. As such, this paper encourages governments to provide more incentives that will encourage OEMs to invest in eco-design in manufacturing and establish a possible “win–win” scenario in terms of both environmental and economic performances.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Shivramwar, Manish V., Nitin k. Kamble Nitin k. Kamble e S. S. Sarnobat S.S.Sarnobat. "Role of Air As An Eco-Friendly Coolants in Green Manufacturing". Indian Journal of Applied Research 3, n.º 10 (1 de outubro de 2011): 1–4. http://dx.doi.org/10.15373/2249555x/oct2013/45.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Khan, Noor Ullah, Ateeq-ur-Rehman Irshad, Adeel Ahmed e Amira Khattak. "Do organizational citizenship behavior for the environment predict triple bottom line performance in manufacturing firms?" Business Process Management Journal 27, n.º 4 (8 de junho de 2021): 1033–53. http://dx.doi.org/10.1108/bpmj-01-2021-0007.

Texto completo da fonte

Resumo:

PurposeOrganizational citizenship behavior for the environment (OCBE) is vital for manufacturing firms' ability to improve their triple bottom line (TBL) performance. This study's objective was to examine the direct relationship between three OCBE key dimensions, i.e. eco-initiatives (EIs), eco-civic-initiatives and eco-helping (EH) and TBL performance, i.e. economic (ECOP), social (SOP) and environmental (ENP).Design/methodology/approachThe quantitative design was used based on the positivist approach. A sample of 350 manufacturing firms was targeted using random probability sampling via a survey questionnaire. The data were analyzed through the structural equation modeling (SEM) technique employing AMOS 24 software.FindingsResearch findings confirmed a significant direct positive relationship between components of OCBE, i.e. EIs, eco-civic- initiatives and EH and TBL performance within ISO14001-certified Malaysian manufacturing firms.Research limitations/implicationsThis research presents vital implications for both managers and organizations. The findings revealed that the three OCBE key dimensions, i.e. (EIs, eco-civic-initiatives and EH) are essential for enhancing TBL performance (ECOP, SOP and ENP), respectively. Manufacturing firms should modify the traditional OCB toward pro-environmental OCBE to improve TBL performance.Originality/valueThis research focuses on the impact of OCBE key types, i.e. EIs, eco-civic-initiatives and EH on TBL performance (ECOP, ENP and SOP) dimensions among ISO14001-certified Malaysian manufacturing firms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Wang, Chuanhui, Asong Han, Weifeng Gong, Mengzhen Zhao e Wenwen Li. "Threshold Effect of Manufacturing Agglomeration on Eco-Efficiency in the Yellow River Basin of China". Sustainability 15, n.º 19 (25 de setembro de 2023): 14151. http://dx.doi.org/10.3390/su151914151.

Texto completo da fonte

Resumo:

Research on the impact of industrial development on the ecological environment of the Yellow River Basin plays a significant role in accelerating the high-quality development of that key region of China. Since the impact of industrial agglomeration on eco-efficiency is very complex, this study constructs a panel threshold model of the impact of manufacturing agglomeration on eco-efficiency and analyzes the heterogeneity of different industries. The results led to the following conclusions: The optimal range for the industrial agglomeration level is 0.37 to 0.40. When the industrial agglomeration level is in that optimal range, the manufacturing agglomeration has a significant positive effect on eco-efficiency, and the eco-efficiency level increases by 2.87% for every 1% increase in the agglomeration level. The agglomeration of high-energy-consuming manufacturing has obvious negative externalities for eco-efficiency; however, this negative effect weakens after the threshold value is reached. However, the impact of the agglomeration of low- and medium-energy-consuming manufacturing industries on eco-efficiency is manifested as a significant positive effect, though when the agglomeration degree is low, the effect is not significant.

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Gonzales, Julirose, Novita Sakundarini, Raja Ariffin e Zahari bin Taha. "Integrated Eco-Design Tool for Malaysian Automobile Industry". Journal of Advanced Computational Intelligence and Intelligent Informatics 14, n.º 1 (20 de janeiro de 2010): 46–54. http://dx.doi.org/10.20965/jaciii.2010.p0046.

Texto completo da fonte

Resumo:

Today’s manufacturing companies are burdened with the pressures of managing their products throughout its life cycles and ensure that their products have minimum impact in the environment through Eco-design methods. This paper looks into the different Product Eco-evaluation methods in terms of Material Recyclability, Manufacturing Process and Disassemblability used for Eco-design, especially in the automobile industry. From these methods, the authors propose an Eco-Design framework suited for Malaysian local automobile SMEs given their limited role in Automobile design.

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Rybaczewska-Błażejowska, Magdalena, e Aneta Masternak-Janus. "Assessing and Improving the Eco-Efficiency of Manufacturing: Learning and Challenges from a Polish Case Study". Energies 14, n.º 23 (3 de dezembro de 2021): 8125. http://dx.doi.org/10.3390/en14238125.

Texto completo da fonte

Resumo:

Manufacturing offers substantial opportunities for economic growth after COVID-19, as long as it delivers competitively priced goods while simultaneously reducing pressure on the environment. In this study, we present the methodological feasibility of the joint application of life cycle assessment (LCA) and data envelopment analysis (DEA) for assessing eco-efficiency at the sector level. We employ this methodology to assess the environmental profiles of manufacturing in Poland in relation to their gross value added, and subsequently calculate the improvement targets for the eco-inefficient manufacturing industries. The study reveals that only the chemical industry is relatively eco-efficient, whereas the remaining industries have considerable room for improvement due to their very low eco-efficiency, and thus should follow the best practices established by the chemical industry. Although there are always individual paths for manufacturing industries to achieve the decoupling of economic growth from environmental pressure, activities such as the transformation of manufacturing methods to be less energy and material intensive and/or to be low-emission, the reincorporation of waste into the manufacturing processes, and the implementation of environmental management systems should become common targets of manufacturing in Poland.

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Lubis, Nurliza, e Najihatul Faridy. "Implementasi Eco-Innovation dan Sustainable Manufacturing terhadap Pertumbuhan Ekonomi Sirkular UMKM Di Kota Langsa". JURNAL BISNIS DAN KEWIRAUSAHAAN 20, n.º 2 (31 de julho de 2024): 92–100. http://dx.doi.org/10.31940/jbk.v20i2.92-100.

Texto completo da fonte

Resumo:

This study aims to determine the implementation of Eco-Innovation and Sustainable Manufacturing on the Circular Economic Growth of MSMEs in Langsa City. This study uses quantitative research. Data collection by conducting surveys and questionnaires. The number of respondents is 100 people consisting of MSMEs in the food and beverage sector in Langsa City. Questionnaire data was tested using SPSS Version 23. The data analysis technique used linear regression analysis. The implementation of Eco-innovation is relatively small in influencing the circular economy. However, if the individual influence on the circular economy is tested, partially Eco-Innovation has not had an influence on the circular economy. However, if tested by multiple linear regression, Eco-Innovation still has hope in increasing the circular economy of MSMEs by 25%. If tested individually, Sustainable Manufacturing has a significance value of 0.00 <0.05. The conclusion of the hypothesis research is accepted because Sustainable Manufacturing has an effect on the circular economy. Likewise, the results of the multiple linear regression of Sustainable Manufacturing have a regression coefficient of 0.620. A positive coefficient means that every 1% increase in Sustainable Manufacturing will increase the Circular Economy by 62%. The recommendation of the research results requires a deeper study of eco-innovation in the production sector.

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Gao, Yu, Zhuoqi Teng, Yan Cai e Xiaotian Dong. "The government-business relationship and eco-innovation: evidence from chinese automobile industry". Ecological Chemistry and Engineering S 28, n.º 4 (1 de dezembro de 2021): 541–61. http://dx.doi.org/10.2478/eces-2021-0036.

Texto completo da fonte

Resumo:

Abstract This study used 2017-2019 Chinese A-share-listed automobile manufacturing companies as research samples to analyse the impact of the government-business relationship on eco-innovation. We found that a healthy government-business relationship had a positive impact on enterprise eco-innovation. The mediating effects test verified that a healthy government-business relationship affected enterprise eco-innovation through financing constraints. In addition, managerial ownership significantly increased the positive impact of a healthy government-business relationship on enterprise eco-innovation. We also found that a healthy government-business relationship had a more substantial impact on enterprise eco-innovation in non-state-owned enterprises when considering corporate property rights. The study results provide empirical evidence for the influence of the government-business relationship on enterprise eco-innovation and deepen our understanding of eco-innovation in China’s automobile manufacturing industry.

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Jura, Przemysław. "Improving the eco-efficiency of manufacturing processes with the use of Industry 4.0 technologies in the circular economy". Scientific Papers of Silesian University of Technology. Organization and Management Series 2022, n.º 158 (2022): 257–66. http://dx.doi.org/10.29119/1641-3466.2022.158.17.

Texto completo da fonte

Resumo:

Purpose: The aim of the article is to analyze the implementation of the Industry 4.0 technologies to improve eco-efficiency of manufacturing processes from the perspective of the development of innovative IT technologies in the circular economy. Design/methodology/approach: The research methods used in the article were desk research analysis of available source data on the functioning of Industry 4.0 technologies. Additionally, the author bases on the institutional and legal method. Analysis of selected documents and existing studies have allowed to obtain answers to the research questions and to describe the eco-efficiency of manufacturing processes. Findings: The Industry 4.0 technologies in the circular economy can contribute to improve the eco-efficiency of manufacturing processes. However, there are still some difficulties in creating the fully efficient processes in the circular economy. Research limitations/implications: The main limitation in carrying out the research is the difficult access to data about the quantity and quality of the eco-efficiency of manufacturing processes improving by the Industry 4.0 technologies. Practical implications: The results of analysis and the conclusions in this article can be used by managers of the different types of companies involved in the circular economy. The research impact upon the enterprise concentrating on the raising awareness of the benefits of using wide range of the Industry 4.0 technologies for improving the eco-efficiency of manufacturing processes. Originality/value: This article describes the benefits that can be obtained from the implementation of the Industry 4.0 technologies in the circular economy. The research issues related to development of the circular economy constitute a new area of research. The newly developed focus on improving eco-efficiency of the manufacturing processes by using the innovative IT technologies in the circular economy. The eco-efficiency of the manufacturing processes in the circular economy, examined from the point of view of the use of Industry 4.0 technologies, is an innovative research approach.

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Sri Hartanti, Dyah Ayu, Ulfa Wulan Agustina, Laili Nur Afifah, Dwi Santika e Alfiyan Taufiqur Rohman. "Pelatihan Eco-Enzyme Sebagai Upaya Pengelolaan Sampah Rumah Tangga". Media Abdimas 2, n.º 1 (7 de fevereiro de 2023): 20–27. http://dx.doi.org/10.37817/mediaabdimas.v2i1.2662.

Texto completo da fonte

Resumo:

This training introduced the manufacture of Eco-Enzyme innovations inhousehold organic waste processing in reducing environmental pollution. Thetarget for the Eco-Enzyme manufacturing training activity was a general publicgroup, namely PKK mothers in Sudimoro Village, Megaluh District, JombangRegency, who were attended by as many as PKK mothers. The 20 participants inthis activity were held at the Sudimoro Village Hall. The steps taken in this activityinclude socialization, training, monitoring, and evaluation. In carrying out theactivities of KKN Sudimoro Megaluh members, activities are carried out in theform of socialization, training, and face-to-face mentoring. The economic impactof the Eco-Enzyme manufacturing training is that it can produce Eco-Enzymeproducts which have the potential to become marketable products and canincrease the income of the people of Sudimoro Village. The social impact of theEco-Enzyme manufacturing training is that it can create an Eco-Enzymeproduction business so that later it can create jobs for the surroundingcommunity, especially the residents of Sudimoro Village. reduce the amount ofhousehold organic waste that can interfere with the comfort and beauty of theSudimoro Village environment. The health impact of Eco-Enzyme manufacturingtraining is that it can create clean and healthy environmental conditions.

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Mtar, Kais, e Souad Bannour Ep Sfar. "Eco-label effects on French manufacturing firms’ performance". Human Systems Management 36, n.º 2 (3 de junho de 2017): 103–14. http://dx.doi.org/10.3233/hsm-171641.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Janahi, Noora A., Christopher M. Durugbo e Odeh R. Al-Jayyousi. "Eco-innovation strategy in manufacturing: A systematic review". Cleaner Engineering and Technology 5 (dezembro de 2021): 100343. http://dx.doi.org/10.1016/j.clet.2021.100343.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Patrascu, Corina, Teofil Campean, Florin Grad, Ciprian Gradinariu, Maria Gavrilescu e Dan-Alexandru Gavrilescu. "ECO-FRIENDLY CORRUGATED BOARD AND SUSTAINABLE PACKAGING MANUFACTURING". Environmental Engineering and Management Journal 16, n.º 3 (2017): 705–14. http://dx.doi.org/10.30638/eemj.2017.072.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Ishak, Siti Aktar, Haslenda Hashim e Tan Sie Ting. "Eco innovation strategies for promoting cleaner cement manufacturing". Journal of Cleaner Production 136 (novembro de 2016): 133–49. http://dx.doi.org/10.1016/j.jclepro.2016.06.022.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Metechko, L. B., e A. E. Sorokin. "Cluster Strategy for Eco-Innovation at Manufacturing Enterprises". Russian Engineering Research 38, n.º 4 (abril de 2018): 316–19. http://dx.doi.org/10.3103/s1068798x18040172.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Li, Wen, Marius Winter, Sami Kara e Christoph Herrmann. "Eco-efficiency of manufacturing processes: A grinding case". CIRP Annals 61, n.º 1 (2012): 59–62. http://dx.doi.org/10.1016/j.cirp.2012.03.029.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Janmesh Hemant Bhoir, Jessly Rajan, Saloni Ramkrishna Patil, Atharva Rajeev Joshi e Akshata Atul Shinde. "Design and manufacturing of eco-friendly acoustic panels". Global Journal of Engineering and Technology Advances 19, n.º 2 (30 de maio de 2024): 001–9. http://dx.doi.org/10.30574/gjeta.2024.19.2.0075.

Texto completo da fonte

Resumo:

Noise pollution poses a significant global challenge, prompting a surge in research aimed at addressing this issue. While traditional acoustic panels using synthetic materials are commonly advocated, concerns over their health and environmental impacts have sparked interest in sustainable alternatives. This paper explores the blossoming trend of utilizing waste materials, particularly natural cellulose fibers derived from agricultural byproducts like coir fiber and rice husk, for sound absorption. Embracing the axioms of sustainability, the study investigates the feasibility of replacing synthetic materials with natural fibers to reduce noise reverberations. Natural fibers such as coir, and rice husk or jute offer promising recyclable and biodegradable choices. The present research has achieved the outcomes of "Sustainable Serenity," a project focused on redefining acoustics with aesthetically pleasing, eco-friendly panels. Comprehensive testing demonstrates a reduction in echo by 39% which tends to diminish the corresponding value of 3.2% of conventional gypsum boards. The thermal resistance yielded 82oC again surpassing the value of 68.7oC for the conventional panels. Also, the impact strength, water absorption, and carbon footprint of the casted panels compared to traditional panels were evaluated to be applauding. The research highlights the potential of sustainable acoustic panels as a cost-effective, environmentally responsible solution for noise control. The aesthetically appealing design and superior performance of the casted panels with felt coverings underscore their suitability for promoting sustainability while enhancing acoustic environments.

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Buitrago-Leiva, Jeimmy Nataly, Adriano Camps e Alvaro Moncada Niño. "Considerations for Eco-LeanSat Satellite Manufacturing and Recycling". Sustainability 16, n.º 12 (8 de junho de 2024): 4933. http://dx.doi.org/10.3390/su16124933.

Texto completo da fonte

Resumo:

This research aims to contribute to the development of the Eco-LeanSat concept by focusing on a sustainable approach to satellite manufacturing and the repurposing of remaining satellite capabilities after failure. Despite satellites no longer being suitable for their original purposes, these remaining capabilities can find new applications. The study begins by identifying relevant innovative eco-design applications. Subsequently, it examines sustainability within the satellite lifecycle supply chain, categorizing it into four methods: (1) active debris removal, (2) transport logistics, (3) mission extension, and (4) repair and construction. Aligned with emerging trends in space activities, the study also considers future developments to maximize satellites’ potential to provide new services. Additionally, the research includes a description of a potential lean manufacturing process that encompasses logistic chains to support the development of a more sustainable space economy. Finally, the study concludes with a technological survey tracing the evolution of the development of the SmallSat and CubeSat platforms that identifies relevant innovative designs for a sustainable space environment.

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Mohamed Naina, Latifah, Yudi Fernando e Muhammad Shabir Shaharudin. "EXTENDED ECO-EFFICIENT SUPPLY CHAIN INTEGRATION MANAGEMENT MODEL: A RESEARCH NOTE". Journal of Governance and Integrity 3, n.º 1 (11 de novembro de 2019): 69–76. http://dx.doi.org/10.15282/jgi.3.1.2019.5423.

Texto completo da fonte

Resumo:

Manufacturing organizations must improve their environmental protection as this is the requirement of every stakeholder nowadays. At the same time, manufacturing organizations that pursue environmental protection goal should adopt eco-efficient supply chain integration as it has been known to improve environmental protection without sacrificing economic and operational performances. Nevertheless, there is a decline in integration among manufacturing organizations and their supply chain partners. Furthermore, investigations in the literature have been one-dimensional toward the relationship between practice and performance. It is obvious that current studies pointing toward energy-efficient practice to achieve eco-efficient supply chain integration but it is insufficient. Thus, this study objective is to investigate the impact of eco-efficient supply chain integration on environmental protection and proposing improvement for future research. This study has proposed an extended eco-efficient supply chain integration management model based on the gap in the literature and industry. This study elaborates on the importance of manufacturing organizations achieving environmental protection while understanding that organizations especially from developing countries cannot afford to move from economic and operational performances. The extended model proposed also underlines the improvement for eco-efficient supply chain integration management model and providing a breakthrough for future research to contribute to the organizational theory development and practical improvements.

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Herrmann, Christoph, Stefan Blume, Denis Kurle, Christopher Schmidt e Sebastian Thiede. "The Positive Impact Factory–Transition from Eco-efficiency to Eco–effectiveness Strategies in Manufacturing". Procedia CIRP 29 (2015): 19–27. http://dx.doi.org/10.1016/j.procir.2015.02.066.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Maldonado-Guzmán, Gonzalo, e Sandra Yesenia Pinzón-Castro. "Financial resources, eco-innovation and sustainability performance in automotive industry". Tec Empresarial 16, n.º 2 (23 de março de 2022): 34–54. http://dx.doi.org/10.18845/te.v16i2.6169.

Texto completo da fonte

Resumo:

Eco-innovation is considered in the literature as one of the most important constructs that substantially improve the environmental sustainability of manufacturing companies. However, it has been shown that companies alone cannot adequately develop eco-innovation activities, to achieve not only a higher level of eco-innovation activities, but also a significant improvement in the level of sustainable performance of manufacturing firms. In addition, little is known about the relationship between financial resources, eco-innovation and sustainable performance fill this gap in the literature and explore the relationship between these three main constructs through an extensive review of the literature. Likewise, a self-administered questionnaire was distributed to a sample of 460 through confirmatory factor analysis and structural equation models. The results obtained suggest that financial resources have significant positive effects on eco-innovation, and eco-innovation has significant positive effects on the sustainable performance of firms in the automotive industry

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Peralta, M. E., Francisco Aguayo González e Juan Ramón Lama Ruiz. "Clean Manufacturing from Cradle to Cradle". Key Engineering Materials 502 (fevereiro de 2012): 43–48. http://dx.doi.org/10.4028/www.scientific.net/kem.502.43.

Texto completo da fonte

Resumo:

The sustainability of manufacturing processes lies in industrial planning and productive activity. Industrial plants are characterized by the management of resource (inputs and outputs), processing and conversion processes, which usually are organized in a linear system. Good planning will optimize the manufacturing and promoting the quality of the industrial system. Cradle to Cradle is a new paradigm for engineering and sustainable manufacturing that integrates projects (industrial parks, manufacturing plants, systems and products) in a framework consistent with the environment, adapted to the society and technology and economically viable. To carry it out, we implement this paradigm in the MGE2 (Genomic Model of Eco-innovation and Eco-design), as a methodology for designing and developing products and manufacturing systems with an approach from the cradle to cradle.

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Kumar, Sanjeev, Somnath Chattopadhyaya e Vinay Sharma. "Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry". Advanced Materials Research 472-475 (fevereiro de 2012): 3359–70. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.3359.

Texto completo da fonte

Resumo:

This study aims to investigate the sustainable supply chain management practices likely to be adopted by the manufacturing industry of automotive products in India. The approach of the present research includes a literature review, in depth interviews and questionnaire surveys. The relationship between sustainable supply chain management practices and environmental performance is studied. The industries in the automotive products industry in India were sampled for empirical study. The data were then analyzed using statistical package for the social sciences is used as a path analysis model to verify the hypothetical construction of the study. The results indicate that performance of automotive products industry regarding eco procurement, eco accounting, eco logistic design, eco product design, eco manufacturing practices, operational performance, vendor management etc in response to the current wave of national & international green issues and also environmental performance of the respective industries.

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Ceptureanu, Sebastian Ion, Eduard Gabriel Ceptureanu, Doina Popescu e Olguta Anca Orzan. "Eco-innovation Capability and Sustainability Driven Innovation Practices in Romanian SMEs". Sustainability 12, n.º 17 (31 de agosto de 2020): 7106. http://dx.doi.org/10.3390/su12177106.

Texto completo da fonte

Resumo:

This study examines the influence of eco-innovation capability on sustainability driven innovation practices in SMEs. In this study, eco-innovation capability is represented by four factors—internal setting, strategies, operations and structure—while sustainability driven innovation practices are represented by three types of practices—process, organizational and product. The direct relationship between eco-innovation capability and sustainability driven innovation practices is statistically tested by using a sample of 397 Romanian manufacturing small and medium-sized enterprises using PLS–SEM and SmartPLS software. The results show that the development of eco-innovation capability has a direct and positive effect on sustainability driven innovation practices employed in manufacturing SMEs by encouraging them to get involved in cleaner production practices, waste handling and recycling on a regular basis or integrate eco-efficiency into their operations, develop new channels for sustainable products or integrate customers’ suggestions or complaints, implement environment management systems, use eco-friendly raw materials or focus on new product development, for instance. Therefore, the paper extends the literature dedicated to eco-innovation by shedding some light on what to focus on when building eco-innovation capability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Sukri, Najahul Kamilah Aminy, Siti Nur ‘Atikah Zulkiffli, Nik Hazimah Nik Mat, Khatijah Omar, Mukhammad Kholid Mawardi e Nur Farah Zafira Zaidi. "An Analysis of Eco-Innovation Capabilities among Small and Medium Enterprises in Malaysia". Administrative Sciences 13, n.º 4 (17 de abril de 2023): 113. http://dx.doi.org/10.3390/admsci13040113.

Texto completo da fonte

Resumo:

The objective of this study is to look at how Malaysian small and medium enterprises (SMEs) are applying eco-innovation capabilities in order to sustain their business performance. Eco-innovation capabilities are represented in this study by five different types of practices, with the indication of unexpected circumstances: eco-product innovation, eco-process innovation, eco-organisational innovation, eco-marketing innovation, and eco-technology innovation. The qualitative research approach was used in the study, and the content analysis was based on in-depth interviews with six top-level managers/owners of Malaysian manufacturing SMEs. According to the data, more than half of SMEs acquired eco-innovation capabilities in order to continue their business performance and thrive in the business sector, while having to confront certain hurdles due to unforeseen situations. According to the findings, eco-innovation capabilities encourage SMEs to engage in waste management, recycling or reusing resources, research and development, sustainable goods that utilize customer requests, and the use of environment management machines. Thus, the findings of this study may aid the efforts of government agencies, policymakers, and top-tier manufacturing SMEs in building an exceptional innovation platform on which SMEs may rely for assistance and support in preserving their business performance in the future and beyond.

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Hong, Myoung-Pyo, Woo-Sung Kim, Ji-Hyun Sung, Dong-Hyuk Kim, Ki-Man Bae e Young-Suk Kim. "High-performance eco-friendly trimming die manufacturing using heterogeneous material additive manufacturing technologies". International Journal of Precision Engineering and Manufacturing-Green Technology 5, n.º 1 (janeiro de 2018): 133–42. http://dx.doi.org/10.1007/s40684-018-0014-9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Garcia-Muiña, González-Sánchez, Ferrari, Volpi, Pini e Settembre-Blundo. "Identifying the Equilibrium Point between Sustainability Goals and Circular Economy Practices in an Industry 4.0 Manufacturing Context Using Eco-Design". Social Sciences 8, n.º 8 (14 de agosto de 2019): 241. http://dx.doi.org/10.3390/socsci8080241.

Texto completo da fonte

Resumo:

For manufacturing companies, the transition to circular business models (CBMs) can be hampered both by the lack of relevant data and by operational tools. Eco-design, associated with Industry 4.0 IoT (Internet of Things) technologies, can be an effective methodological approach in developing products that are consistent with the principles of the circular economy. The reason is that, in the design phase, decisions are made that can significantly influence the degree of sustainability of products during their lifecycle. Therefore, in the manufacturing environment, eco-design represents an innovative approach to include sustainability among the traditional industrial variables such as functionality, aesthetics, quality, and profit. This study aimed to test eco-design as a tool to define the equilibrium point between sustainability and circular economy in the manufacturing environment of ceramic tile production, and to demonstrate how new business opportunities can be created through evolution from a linear to a circular business model, thanks to IoT and Industry 4.0 technologies used as enabling factors. The main result of this paper was the empirical validation in a manufacturing environment of sustainability paradigms through eco-design tools and digital technologies, proposing the circular business model as an operational tool to promote the competitiveness of enterprises.

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Suhery, Suhery, Muthia Roza Linda, Thesa Alif Ravelby, Riza Yonita, Deni Suwandhani, Rina Susanti e Fatih Murtadha Pulungan. "Analisis Penerapan Green Supply Chain Management Terhadap Kinerja Perusahaan Pada UMKM Kuliner Roti di Kota Padang". Jurnal Ekonomi dan Bisnis Dharma Andalas 26, n.º 2 (29 de julho de 2024): 389–405. http://dx.doi.org/10.47233/jebd.v26i2.1568.

Texto completo da fonte

Resumo:

This study aims to analyze how the influence of eco design, green manufacturing and green purchasing on the performance of UMKM Culinary Bread companies in Padang City. The population that will be used as material in the research is all Bread Culinary MSMEs in Padang City, totaling 150 MSMEs. Data was collected through distributing questionnaires and data processing was carried out through SmartPLS version 4 software. The results of this study indicate that (1) eco design has a significant positive effect on company performance (2) Green manufacturing has a significant negative effect on company performance (3) Green purchasing has a positive effect significantly to the company's performance in UMKM Culinary Bread in Padang City. Abstrak Penelitian ini bertujuan untuk menganalisa bagaimana pengaruh eco design, Green manufacturing dan Green purchasing terhadap kinerja perusahaan UMKM Kuliner Roti di Kota Padang. Populasi yang akan dijadikan bahan dalam penelitian adalah seluruh UMKM Kuliner Roti di Kota Padang yang berjumlah 150 UMKM. Data dikumpulkan melalui penyebaran kuesioner dan pengolahan data dilakukan melalui perangkat lunak SmartPLS versi 4. Hasil penelitian ini menunjukan bahwa (1) eco design berpengaruh positif signifikan terhadap kinerja perusahaan (2) Green manufacturing berpengaruh negative signifikan terhadap kinerja perusahaan (3) Green purchasing berpengaruh positif signifikan terhadap kinerja perusahaan pada UMKM Kuliner Roti di Kota Padang.

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Pinzón-Castro, Sandra Yesenia, Gonzalo Maldonado-Guzmán e Raymundo Juárez-Del Toro. "Eco-innovation Types Adoption in Mexican Small and Medium Firms". Journal of Management and Sustainability 13, n.º 2 (16 de outubro de 2023): 127. http://dx.doi.org/10.5539/jms.v13n2p127.

Texto completo da fonte

Resumo:

The debate on eco-innovation is a relatively recent and emerging topic in the literature, and although it is gaining interest among cientific, academic, and enterprise community, and the analysis and discussion in the context of small and medium-sized enterprises is in an embryonic stage, especially in emerging economy countries, such as Mexico. In this sense, the objective of this research is to analyze the most important eco-innovation types that affect eco-innovation adoption in manufacturing SMEs. The results obtained follow that product eco-innovation, process eco-innovation and management eco-innovation are good eco-innovation types adoption of small and medium-sized companies in the automotive industry.

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Kulej-Dudek, Edyta. "Ecolabnet service packages as a response to the needs of manufacturing enterprises in the SME sector of the Baltic Sea Region". Production Engineering Archives 27, n.º 4 (20 de novembro de 2021): 265–71. http://dx.doi.org/10.30657/pea.2021.27.35.

Texto completo da fonte

Resumo:

Abstract Nowadays, the competitiveness of the economy, which is determined to a large extent by the innovative activities of enterprises and institutions, is of great importance for economic development. An important type of innovation is eco-innovations. Eco-innovations are currently a very timely topic undertaken by researchers, but also an important element of the activities of many companies. As a network of service providers for eco-innovations in small and medium-sized manufacturing enterprises, ECOLABNET fits perfectly in this trend. It aims to support, enable and empower companies to undertake sustainable eco-innovation activities in the Baltic Sea Region and beyond. The aim of this publication is to present the results of research on the eco-innovation needs of SME enterprises of the Baltic Sea countries and potential collaboration in this field with external entities. The services developed as packages of eco-innovation services in Ecolabnet that can meet the identified needs were indicated. The survey was conducted between March and May 2019 and covered SMEs in six countries: Poland, Lithuania, Estonia, Sweden, Finland, and Denmark. The subjects of the study were manufacturing companies that improve their products or services. The aim of the research was to gain an understanding of the needs and challenges related to eco-innovation in the context of sustainable development, to identify the future eco-innovation needs of manufacturing SMEs and collaborations with external actors, and to determine how and through which services the Ecolabnet can meet these needs and contribute to the growth of the enterprise. The manufacturing enterprises in this survey were motivated to eco-innovate. However, they lack knowledge on eco-innovation in its broadest sense, and therefore, urgently need the help of external experts, business partners, and networks in this area. The survey covered three areas: Business, Development, and Technology/Production. Business topic areas that entrepreneurs placed a high emphasis on were: branding and communication, supplier relations, customer insights and financial aspects. Within the needs in terms of development put most emphasis on product design, process development, bio-based materials and biodegradable materials. In the last category of identified needs Technology/Production respondents indicated increasing process efficiency, energy optimization and material efficiency. The research results also indicate that product design as well as branding and communication are urgent needs in the field of external expertise. Of the potential needs, the respondents also indicated customer insights, other alternative materials, business models, value chain assessment, and service design.

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Try Dharsana, Muhammad, Andi Iqra Pradipta Natsir, Fakhrul Indra Hermansyah e Khaerunnisa Nur Fatimah Syahnur. "Implementation of eco-control system by Indonesian manufacturing firms: Understanding the mediating role of organizational culture". Environmental Economics 15, n.º 2 (2 de julho de 2024): 12–21. http://dx.doi.org/10.21511/ee.15(2).2024.02.

Texto completo da fonte

Resumo:

Implementing eco-control is a strategic way for companies to prevent environmental damage. This paper aims to analyze the effect of perceived environmental uncertainty and stakeholder pressure on system implementation through environmentally oriented organizational culture as a mediating variable. This study utilizes the PLS-SEM model using a sample of 104 manufacturing companies in Indonesia; 197 respondents from those companies completed the survey. All variables used in the research model are significant for a formative measurement model, and an internal model applied met all criteria. This study confirms a negative relationship between perceptions of environmental uncertainty and environmentally oriented organizational culture (β = 0.174, p &lt; 0.01). The opposite effect is shown by the relationship between stakeholder pressure and organizational culture (β = 0.379, p &lt; 0.01), and the positive effect of organizational culture on the implementation of eco-control in companies is significant (β = 0.650, p &lt; 0.01). In addition, organizational culture partially mediates the relationship between perceptions of environmental uncertainty and the implementation of the eco-control system (β = 0.317, p &lt; 0.05) and between stakeholder pressure and the implementation of this system (β = 0.401, p &lt; 0.05). When companies through managers face uncertainty from the ecological environment and stakeholder pressure, they should utilize an eco-control system, which can succeed in profit goals and environmental responsibility.

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Ma, Jian, Fengfu Yin, Zhenyu Liu e Xiaodong Zhou. "The Eco-design and Green Manufacturing of a Refrigerator". Procedia Environmental Sciences 16 (2012): 522–29. http://dx.doi.org/10.1016/j.proenv.2012.10.072.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Tanabe, Ikuo. "Double-ECO Model Technologies for an Environmentally-friendly Manufacturing". Procedia CIRP 48 (2016): 495–501. http://dx.doi.org/10.1016/j.procir.2016.03.243.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

Walsh, Justin M., e Gangaram Singh. "An eco-efficiency analysis of the snowboard manufacturing industry". International Journal of Sustainable Society 1, n.º 4 (2009): 364. http://dx.doi.org/10.1504/ijssoc.2009.028907.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Matsuda, Michiko, e Fumihiko Kimura. "Usage of a digital eco-factory for sustainable manufacturing". CIRP Journal of Manufacturing Science and Technology 9 (maio de 2015): 97–106. http://dx.doi.org/10.1016/j.cirpj.2014.12.003.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Emmelmann, C. "Eco-efficiency Boosts Growth of Laser Applications in Manufacturing". Laser Technik Journal 10, n.º 3 (maio de 2013): 1. http://dx.doi.org/10.1002/latj.201390046.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Savin, L. S., Yu L. Savyn e O. P. Prykhodko. "ELEMENTS OF THE TECHNOLOGY ECO CONCRETE MANUFACTURING CONCRETE PRODUCTS". Science and Transport Progress, n.º 11 (25 de junho de 2006): 201–3. http://dx.doi.org/10.15802/stp2006/18833.

Texto completo da fonte

Resumo:

The components of ecological concrete manufacture technologies in the production of steel-concrete products have been enlisted. Classification of ecological additives has been provided and the technology of ecological concrete has been described.

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Yurdakul, Melek, e Halim Kazan. "Effects of Eco-Innovation on Economic and Environmental Performance: Evidence from Turkey’s Manufacturing Companies". Sustainability 12, n.º 8 (14 de abril de 2020): 3167. http://dx.doi.org/10.3390/su12083167.

Texto completo da fonte

Resumo:

The concept of eco-innovation has begun to be considered as a solution to preventing environmental damage, especially since the 1990s. Eco-innovation is expected to reduce amounts of waste, air pollution, and material resource usage. However, the effect of eco-innovation on environmental and financial performance has received limited attention. This paper seeks to fill this gap by studying the effect of eco-innovation on environmental and financial performance. In order to do so, data were obtained by collecting surveys completed by 219 manufacturing companies in Turkey. By using structural equation modeling, we found that eco-innovation has a direct effect on pollution prevention, resource saving and recycling; furthermore, it has an indirect positive effect on cost reduction and thus on economic performance. The findings suggest that decision-makers should adopt eco-innovation due to its cost advantage and pollution prevention potential.

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

Заславська, Світлана. "ECO-ORIENTED MANUFACTURING TECHNOLOGIES IN THE PROFESSIONAL TRAINING OF TILERS". Professional Pedagogics 2, n.º 27 (5 de setembro de 2023): 87–96. http://dx.doi.org/10.32835/2707-3092.2023.27.87-96.

Texto completo da fonte

Resumo:

The relevance of this article is dictated by the acuteness of the environmental pollution issue, especially from the construction sector, which presents a challenge both for Ukraine and globally. One of the solutions to this problem is the implementation of green building, which involves the use of environmentally friendly materials, innovative waste-free and low-waste technologies, alternative energy sources, waste recycling, etc. This necessitates new, ecologically oriented approaches in the training of qualified construction workers, particularly tile setters. Objective: Based on global and national experience in green building, this study aims to investigate the issue of training tile setters in Ukraine using eco-oriented technologies and to develop recommendations for improving the process of integrating these technologies into educational curricula and programs. Methods: Analysis of domestic and foreign sources on ecological education and green building, empirical research on the practice of applying ecotechnologies by tile setters in Ukraine. Results: The essence of eco-oriented professional training is revealed, the foreign and national experiences in green building are analyzed; eco-oriented technologies for tile setters are examined; the main ecological requirements for building materials and technologies for tiling works are disclosed; corresponding recommendations for the use of eco-oriented technologies in the professional training of future tile setters are prepared. Conclusions: Eco-oriented professional training must become an integral part of the professional competence of tile setters, bringing changes both to the content and methods of education. For instance, during tiling works, environmentally friendly hydro insulation membrane materials are used; powerful construction companies that conduct eco-certification of their products have emerged; the use of mastics and adhesives based on dry building mixtures reduces construction waste and, consequently, soil pollution at the construction site; more precise laser measuring devices are increasingly used in tiling works. Therefore, in training tile setters, attention should be paid to studying modern green technologies. The importance of developing normative legal acts on eco-certification of building materials and technologies, and subsequently buildings, is substantiated. It is recommended to revise the National Standard of Professional Education for the profession of tile setter, considering ecological requirements, and for teachers of vocational education institutions to pay special attention to forming ecological competence in future tile setters.

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Onu, Christopher, B. Akinlabi e Ngozi Nneji. "ECOPRENEURSHIP AND ORGANISATIONAL PERFORMANCE: A STUDY OF QUOTED PAINT MANUFACTURING FIRMS IN NIGERIA". International Journal of Advanced Studies in Economics and Public Sector Management 11, n.º 2 (5 de maio de 2023): 104–26. http://dx.doi.org/10.48028/iiprds/ijasepsm.v11.i2.10.

Texto completo da fonte

Resumo:

This study investigates the impact of ecopreneurship on the organisational performance of quoted paint manufacturing companies in Nigeria. The objective of the study is to examine the dimensions of ecopreneurship, including eco-innovation, eco-production, green supply chain management, waste management, and eco-marketing, and their influence on organizational performance. The study also explores the moderating effects of environmental commitment and government regulations on this relationship. The study adopts a positivist research philosophy and employs a quantitative research approach. The study population consists of 438 employees from four paint manufacturing companies listed on the Nigerian Exchange, namely CAP Plc, Berger Paints Plc, Meyer Paint Plc, and Premier Paints Plc. Questionnaires were used as the primary data collection method, and a pilot study was conducted to validate the questionnaire. The data were analyzed using descriptive and inferential statistical methods, including multiple regression analysis and hierarchical regression analysis. The findings of the study indicate that eco-marketing has a positive and significant effect on the organizational performance of quoted paint manufacturing companies in Nigeria (β = 0.466, t = 5.195, p < 0.05). Eco-innovation (β = 0.082, t = 0.748, p>0.05) and waste management (β = 0.057, t = 0.511, p>0.05) show positive but insignificant effects, while eco-production (β = -0.136, t = -1.093, p>0.05) and green supply chain management (β = -0.051, t = -0.447, p>0.05) exhibit negative but insignificant effects on organizational performance. The overall relationship between ecopreneurship dimensions and organizational performance is positive but relatively low, with the dimensions accounting for only 9.5% of the variations in organizational performance. An environmental commitment was found to moderate the relationship between ecopreneurship and organizational performance. In conclusion, the study highlights the importance of adopting ecopreneurial practices, particularly eco-marketing, to enhance the organizational performance of quoted paint manufacturing companies in Nigeria. It emphasizes the need for a strong commitment to environmental sustainability within organizations and suggests the integration of environmentally friendly production processes. Regulators and policymakers are encouraged to formulate and enforce policies that promote ecopreneurship practices in order to ensure environmental protection and enhance organisational performance.

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Cuervo Monguí, Oscar Andrés, e Giovanny Andrés Monguí Cortés. "Environmental Management from Ecodesign". Revista de Investigaciones de UNIAGRARIA 2, n.º 1 (1 de janeiro de 2014): 45–54. http://dx.doi.org/10.33133/riu-2-2014-72.

Texto completo da fonte

Resumo:

The patterns of production and consumption that has our society require measures to make good use of natural resources and reduce emissions from the activities related to extraction, manufacturing, marketing and use of products. Organizations may prevent potential negative environmental impacts of its manufacturing and marketing activities through the implementation of eco-design. This is part of the design and development key stages determining the key guidelines for the prevention or reduction of negative environmental impacts that would occur during the life cycle stages. The application of ecodesign covers both operational and managerial levels within an organization. The application of eco-design is consolidated through ISO 14006:2011 “Guidelines for incorporating eco-design in environmental management systems.”

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Atiningsih, Suci, e Taufiq Andre Setiyono. "ECO-EFFICIENCY TERHADAP NILAI PERUSAHAAN DENGAN DIMEDIASI PROFITABILITAS DAN DIMODERASI FIRM SIZE". Balance : Jurnal Akuntansi dan Bisnis 8, n.º 1 (14 de junho de 2023): 40. http://dx.doi.org/10.32502/jab.v8i1.5991.

Texto completo da fonte

Resumo:

The aim of this research is to empirically examine the effect of eco-efficiency on firm value mediated by profitability and moderated by firm size. The population in this study are manufacturing companies listed on the Indonesia Stock Exchange for the 2018-2020 period. The sampling technique used purposive sampling and obtained a company with a total sample of 249 samples. Hypothesis testing using multiple regression analysis. The results of this study are eco-efficiency and profitability have an effect on firm value, profitability cannot mediate the effect of eco-efficiency on firm value, and firm size can moderate the effect of eco-efficiency on firm value. The contribution of this research is to provide input for companies and also for external parties in making decisions related to eco-efficiency management and its impact on company value. The limitations of this study are that the research object used is limited to manufacturing companies listed on the Indonesia Stock Exchange, so that the sample used is less broad and cannot accurately describe the extent of company value in Indonesia.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Artigos de revistas sobre o tema "Eco-Manufacturing"

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos