Literatura científica selecionada sobre o tema "Discrete ply model"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Discrete ply model".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Discrete ply model"
Serra, Joël, Christophe Bouvet, Bruno Castanié e Caroline Petiot. "Scaling effect in notched composites: The Discrete Ply Model approach". Composite Structures 148 (julho de 2016): 127–43. http://dx.doi.org/10.1016/j.compstruct.2016.03.062.
Texto completo da fonteAdam, Louis, Christophe Bouvet, Bruno Castanié, Alain Daidié e Elodie Bonhomme. "Discrete ply model of circular pull-through test of fasteners in laminates". Composite Structures 94, n.º 10 (outubro de 2012): 3082–91. http://dx.doi.org/10.1016/j.compstruct.2012.05.008.
Texto completo da fonteChen, Hailong, e Yongming Liu. "Deformation and failure analyses of cross-ply laminates using a nonlocal discrete model". Composite Structures 152 (setembro de 2016): 1007–13. http://dx.doi.org/10.1016/j.compstruct.2016.06.054.
Texto completo da fonteCui, Xiaodong, Eugene Fang e Jim Lua. "A discrete crack network toolkit for Abaqus for damage and residual strength prediction of laminated composites". Journal of Composite Materials 51, n.º 10 (18 de julho de 2016): 1355–78. http://dx.doi.org/10.1177/0021998316659914.
Texto completo da fonteMahmud, Jamaluddin, Wahyu Kuntjoro e Aidah Jumahat. "Failure Analysis of Fiber Reinforced Composite Materials Used in Malaysian Industries". Scientific Research Journal 4, n.º 2 (31 de dezembro de 2007): 41. http://dx.doi.org/10.24191/srj.v4i2.5658.
Texto completo da fonteMahmud, Jamaluddin, Wahyu Kuntjoro e Aidah Jumahat. "Failure Analysis of Fiber Reinforced Composite Materials Used in Malaysian Industries". Scientific Research Journal 4, n.º 2 (31 de dezembro de 2007): 41. http://dx.doi.org/10.24191/srj.v4i2.9343.
Texto completo da fonteSerra, J., A. Trellu, C. Bouvet, S. Rivallant, B. Castanié e L. Ratsifandrihana. "Combined loadings after medium velocity impact on large CFRP laminated plates: Discrete ply model simulations". Composites Part C: Open Access 6 (outubro de 2021): 100203. http://dx.doi.org/10.1016/j.jcomc.2021.100203.
Texto completo da fonteMcCartney, L. N. "Physically based damage models for laminated composites". Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 217, n.º 3 (1 de julho de 2003): 163–99. http://dx.doi.org/10.1177/146442070321700301.
Texto completo da fonteWang, Yanfeng, e Qi Wu. "A Microscale Analysis of Thermal Residual Stresses in Composites with Different Ply Orientations". Materials 16, n.º 19 (6 de outubro de 2023): 6567. http://dx.doi.org/10.3390/ma16196567.
Texto completo da fonteJäger, Sebastian, Anthony Pickett e Peter Middendorf. "A Discrete Model for Simulation of Composites Plate Impact Including Coupled Intra- and Inter-ply Failure". Applied Composite Materials 23, n.º 2 (21 de julho de 2015): 179–95. http://dx.doi.org/10.1007/s10443-015-9455-2.
Texto completo da fonteTeses / dissertações sobre o assunto "Discrete ply model"
Soufri, Ayoub. "Multi-impact behavior of composite structures : experimental and numerical approach". Electronic Thesis or Diss., Bourgogne Franche-Comté, 2023. http://www.theses.fr/2023UBFCK038.
Texto completo da fonteComposite materials are widely used in the transportation field due to their high specific mechanical properties. However, during their life cycle, they can undergo significant degradation of their mechanical properties when subjected to impact loading. Impact-induced damage occurs in various forms, such as fiber breakage, matrix cracking, fiber/matrix decohesion and delamination. The study of the impact behavior of composite structures has attracted considerable attention in the literature. However, these studies generally relate to the case of a single impact or repeated impacts. Few studies have focused on the case of multiple impacts, even though these are closer to actual service conditions, as in the case of falling hailstones or the projection of external objects such as road gravels, bird strikes, etc. In this thesis, we present robust experimental and numerical methods for in-situ and post-mortem monitoring of damage following the various possible impact cases: single-impact, repeated, sequential, simultaneous impacts, etc. The first phase of the project involved the development of a unique "compressed air cannon" test bench. Then, a dialogue (experimental tests-numerical computations) was ensured to better understand the phenomena involved in multi-impact cases, to finally reach the maximum performance of composite materials
Darby, Kimberly Jeanne. "Consumer Preferences for Locally-Grown Berries: A Discrete Choice Model Estimating Willingness-To-Pay". The Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=osu1392043198.
Texto completo da fonteBalogh, Péter, Daniel Bekesi, Matthew Gorton, József Popp e Péter Lengyel. "Consumer willingness to pay for traditional food products". Elsevier, 2016. http://dx.doi.org/10.1016/j.foodpol.2016.03.005.
Texto completo da fonteGuimarães, Camila. "Avaliação das preferencias dos pacientes por atributos de risco/benefício do tratamento insulínico no diabetes: um modelo de escolha discreta". Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/60/60134/tde-01062009-142902/.
Texto completo da fonteWe used a discrete choice experiment (DCE) to evaluate patients preferences for various attributes of insulin treatment, including route of insulin delivery. Through a review of the literature, expert consultation, and a qualitative descriptive study using individual interviews and focus group techniques, the attributes (and levels) of diabetes treatment most important to patients were identified. The attributes included in the DCE were: glucose control, frequency of hypoglycaemic events, weight gain, route of administration for the long-acting and the short-acting insulin, and out-of-pocket cost. Patients with type 1 or type 2 diabetes were presented with pairs of hypothetical insulin therapy profiles (i.e. choice sets) with different levels of the attributes and were asked to choose the treatment option they preferred. Sociodemographic data and diabetes medication were also collected. Data were analysed using conditional logit regression and segmented models were also developed for the analysis of subgroups. A Two hundred and seventy four questionnaires were completed. The mean age (±SD) of participants was 56.7 ± 12.98 years, and 53% were men. Forty-nine percent of participants were insulin users, and 47 had type 1 diabetes. Overall, patients ideal insulin treatment would provide better glucose control, result in fewer adverse reactions, have the lowest cost, and be administered orally. There was a strong preference and highest mean WTP for glucose control followed by the risk attributes weight gain and hypoglycaemic events. Surprisingly, route of insulin administration was the least valued attribute. Stratification of the sample revealed that patients with higher incomes had a significant higher WTP for better glucose control and less adverse reactions compared to lower income groups. Moreover, the highest the income, the stronger the preference for an oral insulin, while inhaled insulin becomes less important for patients. Segmented models by insulin use and type of diabetes indicated that insulin naïve and type 2 diabetics had a greater aversion to the subcutaneous route. These findings suggest that there may be an important mental barrier to initiating insulin therapy; however, patients tend to accommodate to subcutaneous administration once they initiate therapy. This study illustrates the importance that patients with diabetes place on glucose control and how preferences for insulin therapy vary between subgroups. Specifically, efforts need to be made to overcome the mental barrier to initiating insulin therapy, which may lead to improved control, through improved compliance and ultimately reduce the financial burden of the disease and improve patients quality of life.
Mamun, M. A. A. "An application of stated choice to the valuation of bus attributes : a case study of Dhaka, Bangladesh". Thesis, Loughborough University, 2014. https://dspace.lboro.ac.uk/2134/16198.
Texto completo da fonteSagebiel, Julian. "Valuing improvements in electricity supply using discrete choice experiments". Doctoral thesis, Humboldt-Universität zu Berlin, Lebenswissenschaftliche Fakultät, 2017. http://dx.doi.org/10.18452/17754.
Texto completo da fonteIn order to design electricity markets to simultaneously reduce the share of fossil fuels in energy production and meet the increasing demand for electricity, knowledge on consumer preferences is necessary. The goal of this cumulative dissertation is to contribute to the understanding of preferences of private households for electricity supply attributes in different contexts. In Paper 1 I review statistical methods to compare two frequently applied models, the random parameters logit and the latent class logit. The methods presented here can be readily used by other researchers and practitioners to better understand model performance which ultimately contributes to improving model choice in applied energy research. Based on the empirical findings of Paper 1, Paper 2 identifies preferences of private households in Hyderabad in India for electricity supply quality. The results indicate that willingness to pay for improvements are, on average, rather low. However, the preferences strongly vary between subjects. Papers 3 and 4 investigate preferences of German private households. In \textbf{Paper 3}, the respondents stated their preferences for the organization of the electricity distribution company under different renewable energy scenarios. It turned out that most people are willing to pay more for electricity supplied by municipally-owned companies and cooperatives. This additional willingness to pay increases disproportionally when the share of renewable energy is high. The paper identifies non-profit orientated distribution companies as potential drivers of the energy transition. Paper 4 investigates the determinants for the success of energy cooperatives in Germany. The results indicate that the governance of distribution companies impacts the choices of private households for electricity supply contracts. Especially, people preferred cooperative-like governance attributes.
Helveston, John Paul. "Development and Adoption of Plug-in Electric Vehicles in China: Markets, Policy, and Innovation". Research Showcase @ CMU, 2016. http://repository.cmu.edu/dissertations/855.
Texto completo da fonte(7659032), Zachary Brooks Smith. "DIGITAL TWIN: FACTORY DISCRETE EVENT SIMULATION". 2019.
Encontre o texto completo da fonteNepomuceno, Ana Rita Polainas. "Valorização dos atributos de um hotel citadino pelas gerações Millennial e Z: Uma abordagem através do modelo de escolha discreta". Master's thesis, 2021. http://hdl.handle.net/10071/24278.
Texto completo da fonteThe tourism sector is increasingly important for national economies and in a context of growing competition, it is important for hospitality managers to understand which aspects make hotels more attractive to consumers. However, few studies have investigated the monetary value of hotel attributes. In order to fill this research gap, the present study used the Discrete Choice Experiment (DCE) methodology to: (i) identify and quantify monetarily the attributes of an urban hotel that are most valued by Millennials and Gen Zers; (ii) explore differences in the valuation of attributes by each generation; (iii) investigate the importance of sustainable actions in the hotel sector for these generations. The results suggest that all the attributes investigated significantly affect the choice of urban hotels by the Millennial and Z generations. In particular, sustainable actions are positively valued by both generations, but mainly by Gen Zers. Both generations can also be distinguished by the value that they attribute to the proximity of a hotel to public transportation, with this attribute being only valued by Millennials. Knowing the preferences of these generations and their willingness to pay for hotel attributes is essential for the design of marketing strategies targeting them, allowing hotels to gain a competitive advantage.Besides adding to the lack of scientific literature that applies the DCE in hospitality, this study also adds value due to its focus on Millennial and Z generations and for the introduction of an attribute related to sustainability.
Livros sobre o assunto "Discrete ply model"
McAdams, Stephen, e Bruno L. Giordano. The perception of musical timbre. Editado por Susan Hallam, Ian Cross e Michael Thaut. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780199298457.013.0007.
Texto completo da fonteMenon, Vinod. Arithmetic in the Child and Adult Brain. Editado por Roi Cohen Kadosh e Ann Dowker. Oxford University Press, 2014. http://dx.doi.org/10.1093/oxfordhb/9780199642342.013.041.
Texto completo da fonteCapítulos de livros sobre o assunto "Discrete ply model"
Mader, Angelika. "A Classification of PLC Models and Applications". In Discrete Event Systems, 239–46. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-4493-7_24.
Texto completo da fonteTreseler, Heinz, Nanette Bauer e Stefan Kowalewski. "Verification of IL Programs with an Explicit Model of their PLC Execution". In Discrete Event Systems, 283–90. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-4493-7_29.
Texto completo da fonteMariel, Petr, David Hoyos, Jürgen Meyerhoff, Mikolaj Czajkowski, Thijs Dekker, Klaus Glenk, Jette Bredahl Jacobsen et al. "Econometric Modelling: Extensions". In Environmental Valuation with Discrete Choice Experiments, 83–101. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-62669-3_6.
Texto completo da fonteMariel, Petr, David Hoyos, Jürgen Meyerhoff, Mikolaj Czajkowski, Thijs Dekker, Klaus Glenk, Jette Bredahl Jacobsen et al. "Theoretical Background". In Environmental Valuation with Discrete Choice Experiments, 1–6. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-62669-3_1.
Texto completo da fonteSalinas Ruíz, Josafhat, Osval Antonio Montesinos López, Gabriela Hernández Ramírez e Jose Crossa Hiriart. "Generalized Linear Mixed Models for Proportions and Percentages". In Generalized Linear Mixed Models with Applications in Agriculture and Biology, 209–78. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-32800-8_6.
Texto completo da fonteGössinger, Ralf, e Jacqueline Wand. "Capacitated Price Bundling for Markets with Discrete Customer Segments and Stochastic Willingness to Pay: ABasic Decision Model". In Operations Research Proceedings, 617–23. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48439-2_75.
Texto completo da fonteHarris, Randy Allen. "Generative Semantics 4: The Collapse". In The Linguistics Wars, 223–60. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780199740338.003.0007.
Texto completo da fonteGarrido, Rodrigo A. "Bayesian Reliability of Discrete Choice Models". In Travel Behaviour Research: Updating the State of Play, 425–33. Elsevier, 1998. http://dx.doi.org/10.1016/b978-008043360-8/50023-6.
Texto completo da fonteMilligan, Brook G. "Estimating evolutionary rates for discrete characters". In Models in Phylogeny Reconstruction, 299–312. Oxford University PressOxford, 1994. http://dx.doi.org/10.1093/oso/9780198548249.003.0016.
Texto completo da fonteMorikawa, Takayuki, e Kuniaki Sasaki. "Discrete Choice Models with Latent Variables Using Subjective Data". In Travel Behaviour Research: Updating the State of Play, 435–55. Elsevier, 1998. http://dx.doi.org/10.1016/b978-008043360-8/50024-8.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Discrete ply model"
Hamila, Nahiene, Philippe Boisse e Sylvain Chatel. "Meso-Macro Simulations of Textile Composite Forming". In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72382.
Texto completo da fonteNerurkar, Nandan L., Robert L. Mauck e Dawn M. Elliott. "Modeling Inter-Lamellar Interactions in Angle-Ply Nanofibrous Biologic Laminates for Annulus Fibrosus Tissue Engineering". In ASME 2010 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2010. http://dx.doi.org/10.1115/sbc2010-19479.
Texto completo da fonte. GOLDBERG, ROBERT K., e TRENTON M. RICKS. "DEVELOPMENT OF SIMPLIFIED METHODS TO CHARACTERIZE PLASTICITY PARAMETERS FOR LS-DYNA MAT213". In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36550.
Texto completo da fonteArpacioglu, Bertan, e Altan Kayran. "Comparative Structural Optimization Study of Composite and Aluminum Horizontal Tail Plane of a Helicopter". In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11153.
Texto completo da fonteAtanasov, Atanas A., Thomas J. Wright e John P. Parmigiani. "Improvement on the Analysis of a Finite Element Composites Model". In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63282.
Texto completo da fonteESKANDARIYUN, AMIRALI, HUILONG FU, JOHANNES REINER, REZA VAZIRI e NAVID ZOBEIRY. "EXPLORING UNDERLYING CORRELATIONS IN MULTI-FIDELITY FINITE ELEMENT SIMULATIONS OF OPEN-HOLE TENSION TESTS: A COMPARATIVE STUDY USING MACHINE LEARNING". In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36670.
Texto completo da fonteFerrero, Laura, e Ugo Icardi. "Optimization of Multi-Core Sandwich Composites Undergoing Impact Loads". In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42851.
Texto completo da fonteEl-Khazali, Reyad, Shaher Momani e Iqbal Batiha. "A New Discrete-Time Model of Fractional-Order PLL". In 2020 3rd International Conference on Signal Processing and Information Security (ICSPIS). IEEE, 2020. http://dx.doi.org/10.1109/icspis51252.2020.9340137.
Texto completo da fonteDogaru, Elvis, Flaviu Mihai Frigura-Iliasa, Mirela Iorga, Lia Dolga, Hannelore Filipescu e Mihaela Frigura-Iliasa. "PLC Commanded Intelligent Logistics Model Based on Discrete Event Systems". In 2019 4th International Conference on Intelligent Transportation Engineering (ICITE). IEEE, 2019. http://dx.doi.org/10.1109/icite.2019.8880159.
Texto completo da fonteVieira, Agnelo Denis, Jose Eduardo Ribeiro Cury e Max Hering de Queiroz. "A Model for PLC Implementation of Supervisory Control of Discrete Event Systems". In 2006 IEEE Conference on Emerging Technologies and Factory Automation. IEEE, 2006. http://dx.doi.org/10.1109/etfa.2006.355436.
Texto completo da fonteRelatórios de organizações sobre o assunto "Discrete ply model"
Rigby, Dan, Michael Burton, Katherine Payne, Zachary Payne-Thompson, Stuart Wright e Sarah O’Brien. Impacts of Food Hypersensitivities on Quality of Life in the UK and Willingness to Pay (WTP) to remove those impacts. Food Standards Agency, dezembro de 2022. http://dx.doi.org/10.46756/sci.fsa.kij502.
Texto completo da fonteWozniakowska, P., D. W. Eaton, C. Deblonde, A. Mort e O. H. Ardakani. Identification of regional structural corridors in the Montney play using trend surface analysis combined with geophysical imaging, British Columbia and Alberta. Natural Resources Canada/CMSS/Information Management, 2021. http://dx.doi.org/10.4095/328850.
Texto completo da fonte