Bibliografias temáticas / Design and construction

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Design and construction"

Autor: Grafiati
Publicado: 4 de junho de 2021
Última modificação: 30 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Design and construction".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Design and construction"

1

Herr, Christiane M. "Design Is Construction, Construction Is Design". She Ji: The Journal of Design, Economics, and Innovation 5, n.º 4 (2019): 367–69. http://dx.doi.org/10.1016/j.sheji.2019.11.007.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

原, 乙铭. "Tentative Analysis of Interaction Design and Sustainable Landscape Construction". Design 09, n.º 01 (2024): 600–605. http://dx.doi.org/10.12677/design.2024.91072.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

袁, 文静. "Integrated Construction of Sustainable Energy Landscape and Regional Culture". Design 09, n.º 02 (2024): 498–502. http://dx.doi.org/10.12677/design.2024.92237.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

龚, 康妍. "Construction Strategy of Gamification Service Design in Community Shared Kitchen". Design 09, n.º 02 (2024): 382–90. http://dx.doi.org/10.12677/design.2024.92225.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Chen, Lan Fang, Gang Wu e Yi Bin Zhang. "Construction Enterprise Supply Chain Design Research". Advanced Materials Research 328-330 (setembro de 2011): 172–75. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.172.

Texto completo da fonte
Resumo:
The introduction of the thought of supply chain management into the construction industry can improve the competitiveness of enterprises. Based on the integration of both the effect of the supply chain as well as supply chain management and the actual situation, this paper analyzed the necessity of the construction and implementation of supply chain management of the construction enterprise. Compared with the supply chain of manufacturing industry, we found it feasible to implement supply chain management in the construction industry and analyzed the obstacles in it. Finally, it pointed out that the clustering of construction materials, information technology, business process reengineering, outsourcing of projects logistics and so on were the basis of constructing supply chain management of the construction enterprise, and accordingly the joint-design supply chain model of the project cost-oriented and the responsiveness-oriented was established.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Huo, Ruiping. "On Matters Needing Attention in Building Structure Design". World Construction 4, n.º 3 (19 de setembro de 2015): 30. http://dx.doi.org/10.18686/wcj.v4i3.9.

Texto completo da fonte
Resumo:
<p>Although there have been good developments in China’s construction industry with increasing building technology and design levels, there are still some issues that require attention and to be solved by designers in constructing structure designs. The stability of building structure and the quality of construction can only be ensured with continual rectifying and solving problems in structural design. In this study, the discussion examines some design problems encountered in actual construction work.</p>
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Huo, Ruiping. "On Matters Needing Attention in Building Structure Design". World Construction 4, n.º 3 (19 de setembro de 2015): 30. http://dx.doi.org/10.18686/wc.v4i3.9.

Texto completo da fonte
Resumo:
<p>Although there have been good developments in China’s construction industry with increasing building technology and design levels, there are still some issues that require attention and to be solved by designers in constructing structure designs. The stability of building structure and the quality of construction can only be ensured with continual rectifying and solving problems in structural design. In this study, the discussion examines some design problems encountered in actual construction work.</p>
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

薛, 蓉蓉. "Gene Identification and Map Construction of Huizhou Ancient Stage Architecture". Design 09, n.º 02 (2024): 283–95. http://dx.doi.org/10.12677/design.2024.92213.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Khan, Khalid Mohiuddin, e Mr Masoom Reza. "Earned Value Management for Design and Construction Project". International Journal of Trend in Scientific Research and Development Volume-2, Issue-5 (31 de agosto de 2018): 1482–502. http://dx.doi.org/10.31142/ijtsrd17029.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

胡, 晓琪. "Research on the Construction Path of Rural Design Element Resource Library". Design 08, n.º 03 (2023): 1950–59. http://dx.doi.org/10.12677/design.2023.83235.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Design and construction"

1

Palaoro, Stefania. "Arch bridges: Design - Construction - Perception". Doctoral thesis, University of Trento, 2011. http://eprints-phd.biblio.unitn.it/504/1/Stefania_Palaoro_Arch_bridges%2Cdesign-construction-perception.pdf.

Texto completo da fonte
Resumo:
The arch bridges have an historical development, that is rooted in their ancient tradition, yet are also very successful to this day, a rediscovery of the earliest arched forms can be seen in the most recent innovations. After millennia of masonry arch bridges and almost two centuries of relentless development of iron, steel and concrete arch bridges, with different structural schemes and constructive shapes, there was a moment that this type of structure was bound to disappear. The scope of traditional arch bridges, which refers mainly to the ones of small and medium span, was to become the uncontested role of the girder bridges. The reuse and the assertion of the arch bridge has been accompanied by a strong architectural emphasis on their structural design and constructive details. This relation, increasingly important during the design phase between the concept of FORM and of STRUCTURE, has ensured that many new projects link the strong relationship between TRADITION and technological and constructive INNOVATION. I ponti ad arco sono quelli che presentano un’evoluzione storica che fonda le sue radici nella tradizione più antica, ma anche quelli che ricevono all’oggi il maggior successo, una riscoperta delle prime forme arcuate che ritornano quasi come una moda ma con l’impiego delle recenti innovazioni: dopo millenni di ponti ad arco in muratura e quasi due secoli di inarrestabile sviluppo di ponti ad arco in ghisa, di ferro, acciaio e di cemento armato, accompagnato da diversi schemi strutturali e di forme costruttive, sembrava che questa tipologia fosse destinata a scomparire. Infatti il campo tradizionale dei ponti ad arco che si riferiva soprattutto ai ponti di media luce era divenuto oramai dominio incontrastato dei soli ponti a travata. Il riuso e il riaffermarsi del ponte ad arco è stato accompagnato da una forte accentuazione architettonica della loro concezione strutturale e dei loro dettagli costruttivi. Il rapporto sempre più importante in fase progettuale di correlare il concetto di FORMA con quello di STRUTTURA ha fatto in modo che molte nuove opere d’arte di nuova realizzazione unissero in sé il forte rapporto tra TRADIZIONE e INNOVAZIONE tecnologica e costruttiva.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Westerhoff, Kevin M. (Kevin Matthew) 1978. "Construction based design". Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84827.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Dowling, Susan J. "Constructing Identity Identity Construction". Digital Archive @ GSU, 2011. http://digitalarchive.gsu.edu/art_design_theses/88.

Texto completo da fonte
Resumo:
In this art-based study I will examine the construction of identity creating three life size figures utilizing metaphor and symbolism. I recorded and analyzed the process through reflections. The artist/teacher/researcher will provide conclusions based on art production and self-reflection.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Xie, Xiaoling. "Communications in construction design". Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/7571.

Texto completo da fonte
Resumo:
Construction design has become an increasingly complex synthesis activity for which effective solutions depend upon co-operative participation by a number of people. Thus communication, including the integration of specialised knowledge and negotiation of differences between team members, is a vital process for collaborative design. A questionnaire survey was initially conducted to investigate communication issues and problems, which had been highlighted from a review of the literature, in current construction design. The results confirmed that communication among the different construction team members is often difficult although of paramount important to design outcomes. Based on these results, case studies have been carried out to gain further insights into communication issues and problems, and explore why and how they are caused. Through the application of multiple approaches, a model has been developed, which suggests strategies that may help participants communicate more effectively and ultimately improve the quality of construction design outcomes.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Soto, Leticia S. M. Massachusetts Institute of Technology. "Construction design as a process for flow : applying lean principles to construction design". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/42995.

Texto completo da fonte
Resumo:
Thesis (S.M.)--Massachusetts Institute of Technology, System Design and Management Program, 2007.
Includes bibliographical references (p. 108-111).
Delays and cost overruns are the rule rather than the exception in the construction industry. Design changes due to lack of constructability late in the construction phase generating costly ripple effect which create delay and disruption throughout the entire organization, are the largest contributors to the stated rule. In the building construction industry, of increased competitiveness, demand from many companies continued effort to develop new methods and tools, in which the design for quality, cost, construability and reliability play an important role. The planning and management of building design has historically focused upon traditional methods of planning such as Critical Path Method (CPM). Little effort is made to understand the complexities of the design process; instead design managers focus on allocating work packages where the planned output is a set of deliverables. This current design method forces design teams to manage their work on a discipline basis, each working on achieving their deliverable as dictated by the design program with little regard of the relationship with other disciplines and organizations. In addition, because Architect and Engineering firms view design and construction as two separate independent phases of work in project it makes it difficult to verify constructability in a design and create flow in the overall process. The goal of this study is to look at how aligning interests, objectives and practices based on lean fundamentals, during the earliest stages of a project, as a method of improving construction performance.
by Leticia Soto.
S.M.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Leung, Chi-ming. "Design consultancy vs design and build consultancy : present trends in the construction industry /". Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038869.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Sebille, Michel. "Design :construction, automorphisms and colourings". Doctoral thesis, Universite Libre de Bruxelles, 2002. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/211428.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Chew, En Phin. "Superconducting Transformer Design and Construction". Thesis, University of Canterbury. Electrical and Computer Engineering, 2010. http://hdl.handle.net/10092/4977.

Texto completo da fonte
Resumo:
This thesis first outlines the testing undertaken on a partial core superconducting transformer under open circuit, short circuit, full load and endurance test conditions. During the endurance test, a failure occurred after 1 minute and 35 seconds. During the failure, voltage dipping and rapid liquid nitrogen boil off was observed. This prompted a failure investigation which concluded that the lack of cooling in the windings was the most probable cause to the failure. Full core transformer and superconductor theories are then introduced. A copper winding transformer model, based on a Steinmetz equivalent circuit and a reverse design method, is described. A superconductor loss model which outlines the different types of losses experienced under AC conditions is used to determine the resistance of the windings in the Steinmetz equivalent circuit. This resistance changes with the magnitude of current and the strength of the magnetic field that is present in the gaps between each layer of the windings. An alternative leakage flux model is then presented, where the flux is modelled based on the combination of the reluctance of the core and the air surrounding the windings. Based on these theories, an iterative algorithm to calculate the resistance of the superconductor is developed. A new design of a 15kVA single phase full core superconducting transformer, operating in liquid nitrogen, is presented. The issues with building the superconducting transformer are outlined. First, a copper mockup of the superconducting transformer was designed where the mockup would have the same tape and winding dimensions as the superconducting transformer, which means the same core can be used for two different sets of windings. This led to designing a core that could be easily taken apart as well as reassembled. Construction of the core, the copper windings and the superconductor windings ensued. The process of cutting the core laminations, insulating the copper and superconductor tapes, and making the steel fasteners and terminations are described. The copper mockup and superconducting transformers was then tested under open circuit, short circuit, different load and endurance conditions at both liquid nitrogen and room temperatures. These test results were then compared with the those from two models. The comparison showed a significant inaccuracy in the reactances in the models. This introduced a correction factor into the superconductor model which ii made it more accurate. However, further work is required to explain and quantify the correction factors for the copper transformer model under different load conditions.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Palaoro, Stefania. "Arch bridges: Design - Construction - Perception". Doctoral thesis, Università degli studi di Trento, 2011. https://hdl.handle.net/11572/367845.

Texto completo da fonte
Resumo:
The arch bridges have an historical development, that is rooted in their ancient tradition, yet are also very successful to this day, a rediscovery of the earliest arched forms can be seen in the most recent innovations. After millennia of masonry arch bridges and almost two centuries of relentless development of iron, steel and concrete arch bridges, with different structural schemes and constructive shapes, there was a moment that this type of structure was bound to disappear. The scope of traditional arch bridges, which refers mainly to the ones of small and medium span, was to become the uncontested role of the girder bridges. The reuse and the assertion of the arch bridge has been accompanied by a strong architectural emphasis on their structural design and constructive details. This relation, increasingly important during the design phase between the concept of FORM and of STRUCTURE, has ensured that many new projects link the strong relationship between TRADITION and technological and constructive INNOVATION. I ponti ad arco sono quelli che presentano un’evoluzione storica che fonda le sue radici nella tradizione più antica, ma anche quelli che ricevono all’oggi il maggior successo, una riscoperta delle prime forme arcuate che ritornano quasi come una moda ma con l’impiego delle recenti innovazioni: dopo millenni di ponti ad arco in muratura e quasi due secoli di inarrestabile sviluppo di ponti ad arco in ghisa, di ferro, acciaio e di cemento armato, accompagnato da diversi schemi strutturali e di forme costruttive, sembrava che questa tipologia fosse destinata a scomparire. Infatti il campo tradizionale dei ponti ad arco che si riferiva soprattutto ai ponti di media luce era divenuto oramai dominio incontrastato dei soli ponti a travata. Il riuso e il riaffermarsi del ponte ad arco è stato accompagnato da una forte accentuazione architettonica della loro concezione strutturale e dei loro dettagli costruttivi. Il rapporto sempre più importante in fase progettuale di correlare il concetto di FORMA con quello di STRUTTURA ha fatto in modo che molte nuove opere d’arte di nuova realizzazione unissero in sé il forte rapporto tra TRADIZIONE e INNOVAZIONE tecnologica e costruttiva.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ferguson, A. J. L. "Dilution refrigerator : Design, construction and performance". Thesis, University of Ulster, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378638.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Design and construction"

1

Transport Research Laboratory. Library Services., ed. Bridge design & construction. Crowthorne: Transport Research Laboratory, Library Services, 1993.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Incorporated, Cy DeCosse, ed. Landscape design & construction. Minnetonka, Minn: Cy DeCosse Inc., 1993.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Remiasz, Mile Victoria, ed. Hats, design & construction. 2a ed. Evergreen Park, Ill: Hat Tree Studio, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

R, Boorman, ed. Foundation design and construction. 5a ed. Burnt Mill, Harlow, Essex, England: Longman Scientific & Technical, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Tomlinson, M. J. Foundation design and construction. London: Longman, 1986.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Penman, Laurie. Clock design and construction. 2a ed. London: Alphabooks, 1989.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Spence, William Perkins. Furnituremaking: Design and construction. Englewood Cliffs, N.J: Prentice Hall, 1991.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Ambrose, James. Building Construction and Design. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-6583-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Salter, R. J. Highway Design and Construction. London: Macmillan Education UK, 1988. http://dx.doi.org/10.1007/978-1-349-10067-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ambrose, James E. Building construction and design. New York: Van Nostrand Reinhold, 1992.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Design and construction"

1

Maisel, Jordana L., Edward Steinfeld, Megan Basnak, Korydon Smith e M. Beth Tauke. "Construction". In Inclusive Design, 97–124. New York : Routledge, 2017. | Series: PocketArchitecture : technical design series: Routledge, 2017. http://dx.doi.org/10.4324/9781315712437-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Chappell, David. "Design". In Construction Contracts, 90–102. Fourth edition. | Abingdon, Oxon; New York: Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.1201/9781003080930-10.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Chappell, David. "Design". In Construction Contracts, 90–102. Fourth edition. | Abingdon, Oxon; New York: Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.4324/9781003080930-10.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Beadnall, Stuart, e Simon Moore. "Design risk". In Offshore Construction, 47–72. 2a ed. London: Informa Law from Routledge, 2021. http://dx.doi.org/10.4324/9780367855574-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Soutsos, Marios, e Peter Domone. "Concrete mix design". In Construction Materials, 249–58. Fifth edition. | Boca Raton : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315164595-25.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Dodd, Graham. "Design and applications". In Construction Materials, 453–58. Fifth edition. | Boca Raton : CRC Press, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315164595-45.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Houben, Hugo, e Hubert Guillard. "10. Design Guidelines". In Earth Construction, 244–303. Rugby, Warwickshire, United Kingdom: Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780444826.010.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Mosley, W. H., J. H. Bungey e R. Hulse. "Composite construction". In Reinforced Concrete Design, 350–73. London: Macmillan Education UK, 1999. http://dx.doi.org/10.1007/978-1-349-14911-7_13.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

McLean, Will, e Pete Silver. "Construction Technology". In Environmental Design Sourcebook, 66–97. London: RIBA Publishing, 2021. http://dx.doi.org/10.4324/9781003189046-3.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Delligatti, T. M. "Preparing for Construction". In Costume Design, 88–120. New York, NY : Routledge, 2021. | Series: The basics: Routledge, 2020. http://dx.doi.org/10.4324/9780429354304-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Design and construction"

1

Meng Zhang. "Digital construction—construction research in virtual space". In Conceptual Design (CAID/CD). IEEE, 2008. http://dx.doi.org/10.1109/caidcd.2008.4730652.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Endresen, A. A., V. A. Zhukova, D. D. Mordashova, E. V. Rakhilina e O. N. Lyashevskaya. "THE RUSSIAN CONSTRUCTICON: A NEW LINGUISTIC RESOURCE, ITS DESIGN AND KEY CHARACTERISTICS". In International Conference on Computational Linguistics and Intellectual Technologies "Dialogue". Russian State University for the Humanities, 2020. http://dx.doi.org/10.28995/2075-7182-2020-19-241-255.

Texto completo da fonte
Resumo:
We present a new open-access electronic resource named the Russian Constructicon that offers a searchable database of Russian constructions accompanied by descriptions of their properties and illustrated with corpus examples. The project was carried out over the period 2016–2020 and at present contains an inventory of over 2200 multi-word constructions of Contemporary Standard Russian. We prioritize “partially schematic” constructions that lie between the two extremes of fully compositional syntactic sequences on the one hand and fully idiomatic (phraseological) expressions on the other hand. Constructions of this type are difficult to account for in terms of either lexicon or grammar alone, and are often underrepresented in reference works of Russian. A typical construction in our database contains a fixed part (anchor words) and an open slot that can be filled with a restricted set of lexemes. In this paper we first focus on key characteristics of this resource that make it different from existing constructicons of other languages. Second, we describe how the new interface will be designed and how it will serve the needs of both linguists and L2 learners of Russian. In particular, we discuss various search possibilities relevant for different users and those parameters that are available for specifying the retrieval output. An example of an entry is given to show how the information about each construction is structured and presented. Third, we provide an overview of our multi-level semantic classification of constructions. We argue that our system of semantic and syntactic tags subdivides our items into meaningful classes and smaller groups and eventually facilitates the identification of constructional families and clusters. This methodology works well in turning the initial list of constructions as unrelated units into a structured network and makes it possible to refine and expand the collected inventory of constructions in a systematic way.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Ge, Q. J., e B. Ravani. "Geometric Construction of Bézier Type Motion Interpolants". In ASME 1992 Design Technical Conferences. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/detc1992-0335.

Texto completo da fonte
Resumo:
Abstract This paper deals with discrete computational geometry of motions and develops geometric construction algorithms for interpolating in-between rigid displacements. It combines concepts from the fields of kinematics and computational geometry and develops a computational framework for constructing motion interpolants useful in mechanical systems animation, robot trajectory planning and key framing in computer graphics. A de Casteljau type algorithm is presented for constructing Bézier and rational Bézier motion interpolants. In addition, the problem of achieving higher order of continuity in piecing together motion interpolants is studied. A geometric construction algorithm is presented for designing C2 continuous motion interpolants.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

VUKIC, Fedja. "Art criticism and the semantic construction of the concept of Design". In Design frontiers: territories, concepts, technologies [=ICDHS 2012 - 8th Conference of the International Committee for Design History & Design Studies]. Editora Edgard Blücher, 2014. http://dx.doi.org/10.5151/design-icdhs-109.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Gransberg, Douglas D., e Keith R. Molenaar. "Life Cycle Design Criteria for Design-Build Transportation Projects". In Construction Research Congress 2003. Reston, VA: American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40671(2003)86.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

FRANKLIN, H. "Construction issues on the moon". In Aerospace Design Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-1033.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Shrestha, Pramen P., e Nirajan Mani. "Impact of Design Cost on Design Bid Build Project Performance". In Construction Research Congress 2012. Reston, VA: American Society of Civil Engineers, 2012. http://dx.doi.org/10.1061/9780784412329.158.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Kalach, Mayssa, Issam Srour e Mohamed-Asem Abdul-Malak. "Envisioned Roles of BIM for Design Delivery under Design-Build Projects". In Construction Research Congress 2018. Reston, VA: American Society of Civil Engineers, 2018. http://dx.doi.org/10.1061/9780784481264.054.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Floreaburduja, Elena, Aliona Raru, Daniela Farima, Marcela Irovan e Iuliana gabriela Lupu. "SOFTWARE APPLICATION FOR CONSTRUCTION-FUNCTIONAL DESIGN OF PANTS FOR PEOPLE WITH LOWER LIMB AMPUTATIONS". In eLSE 2021. ADL Romania, 2021. http://dx.doi.org/10.12753/2066-026x-21-157.

Texto completo da fonte
Resumo:
The paper proposes a software application designed to design the product pants for people with lower limb amputations, for women and men, worn during rehabilitation or social integration. The application can be used both by small and medium-sized enterprises and as a teaching tool for the master's course "Functional and ergonomic design in textiles". The application has a structure with open architecture that allows completing, modifying it according to needs but also automating engineering activity. For the realization of the basic pattern, the data related to the carrier and the product are considered as initial data. The model construction is elaborated by taking into account the product sketch created by the designer which provides information about the types of changes, the location of the product, the contour of the constructive-decorative elements, etc. For the construction of the model, a library was created with functional-constructive elements, depending on the level of amputation of people and their needs. By selecting the necessary constructive-functional elements and combining with the basic construction, we obtain the model constructions of the trousers products for women and men, which have lower limb amputations. The application is designed to allow the subsequent completion of the database with various products for people with locomotor disabilities and the completion of the graphic library with functional-constructive and decorative elements, depending on the type of disability, doctors' recommendations and wishes. The examples presented can be used both to facilitate the work of builders in enterprises and workshops, and in educational institutions. All patterns can be easily changed as needed.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Uddin, Nasim. "Concrete Plug Design for a Mine Closure". In Construction Congress VI. Reston, VA: American Society of Civil Engineers, 2000. http://dx.doi.org/10.1061/40475(278)131.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Design and construction"

1

CORPS OF ENGINEERS WASHINGTON DC. Construction: Design and Construction Evaluation (DCE). Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 1996. http://dx.doi.org/10.21236/ada404141.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Slocum, Alexander H., Laura A. Demsetz, David H. Levy e Bruce Schena. Design Methodology for Automated Construction Machines. Fort Belvoir, VA: Defense Technical Information Center, dezembro de 1987. http://dx.doi.org/10.21236/ada207386.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Fanella, David A., Amaldo T. Derecho e S. K. Ghosh. Design and construction of structural systems. Gaithersburg, MD: National Institute of Standards and Technology, 2005. http://dx.doi.org/10.6028/nist.ncstar.1-1av1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Collins, James J. Design and Construction of Genetic Applets. Fort Belvoir, VA: Defense Technical Information Center, maio de 2003. http://dx.doi.org/10.21236/ada417910.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Jackson, J. G. Y-12 Sustainable Design Principles for Building Design and Construction. Office of Scientific and Technical Information (OSTI), novembro de 2008. http://dx.doi.org/10.2172/969028.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

CORPS OF ENGINEERS WASHINGTON DC. Engineering and Design. Construction with Large Stone. Fort Belvoir, VA: Defense Technical Information Center, outubro de 1990. http://dx.doi.org/10.21236/ada402849.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

McNeese, L. E. ORNL engineering design and construction reengineering report. Office of Scientific and Technical Information (OSTI), janeiro de 1998. http://dx.doi.org/10.2172/631227.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Janet E.R. Mcllvaine, David Beal e Philip Fairey. INTERIOR DUCT SYSTEM DESIGN, CONSTRUCTION, AND PERFORMANCE. Office of Scientific and Technical Information (OSTI), outubro de 2001. http://dx.doi.org/10.2172/823970.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Schwartztrauber, K. Modular Design/Phased Construction Alternative Evaluation Report. Office of Scientific and Technical Information (OSTI), maio de 1999. http://dx.doi.org/10.2172/763136.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Deschamps, Richard, Christopher Hynes e Philippe Bourdeau. Embankment Widening Design Guidelines and Construction Procedures. West Lafayette, IN: Purdue University, 1999. http://dx.doi.org/10.5703/1288284313202.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Design and construction":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia