Artigos de revistas sobre o tema "DED metal additive manufacturing"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "DED metal additive manufacturing".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Peyre, Patrice. "Additive Layer Manufacturing using Metal Deposition". Metals 10, n.º 4 (1 de abril de 2020): 459. http://dx.doi.org/10.3390/met10040459.
Texto completo da fonteZhang, Wenjun, Chunguang Xu, Cencheng Li e Sha Wu. "Advances in Ultrasonic-Assisted Directed Energy Deposition (DED) for Metal Additive Manufacturing". Crystals 14, n.º 2 (24 de janeiro de 2024): 114. http://dx.doi.org/10.3390/cryst14020114.
Texto completo da fonteZiesing, Ulf, Jonathan Lentz, Arne Röttger, Werner Theisen e Sebastian Weber. "Processing of a Martensitic Tool Steel by Wire-Arc Additive Manufacturing". Materials 15, n.º 21 (22 de outubro de 2022): 7408. http://dx.doi.org/10.3390/ma15217408.
Texto completo da fonteStrong, Danielle, Michael Kay, Thomas Wakefield, Issariya Sirichakwal, Brett Conner e Guha Manogharan. "Rethinking reverse logistics: role of additive manufacturing technology in metal remanufacturing". Journal of Manufacturing Technology Management 31, n.º 1 (7 de agosto de 2019): 124–44. http://dx.doi.org/10.1108/jmtm-04-2018-0119.
Texto completo da fonteDass, Adrita, e Atieh Moridi. "State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design". Coatings 9, n.º 7 (29 de junho de 2019): 418. http://dx.doi.org/10.3390/coatings9070418.
Texto completo da fonteRodríguez-González, Paula, Erich Neubauer, Enrique Ariza, Leandro Bolzoni, Elena Gordo e Elisa María Ruiz-Navas. "Assessment of Plasma Deposition Parameters for DED Additive Manufacturing of AA2319". Journal of Manufacturing and Materials Processing 7, n.º 3 (8 de junho de 2023): 113. http://dx.doi.org/10.3390/jmmp7030113.
Texto completo da fonteSaboori, Abdollah, Mostafa Toushekhah, Alberta Aversa, Manuel Lai, Mariangela Lombardi, Sara Biamino e Paolo Fino. "Critical Features in the Microstructural Analysis of AISI 316L Produced By Metal Additive Manufacturing". Metallography, Microstructure, and Analysis 9, n.º 1 (2 de janeiro de 2020): 92–96. http://dx.doi.org/10.1007/s13632-019-00604-6.
Texto completo da fonteKo, Ui Jun, Ju Hyeong Jung, Jung Hyun Kang, Kyunsuk Choi e Jeoung Han Kim. "Enhanced Microstructure and Wear Resistance of Ti–6Al–4V Alloy with Vanadium Carbide Coating via Directed Energy Deposition". Materials 17, n.º 3 (3 de fevereiro de 2024): 733. http://dx.doi.org/10.3390/ma17030733.
Texto completo da fonteSaboori, Abdollah, Alberta Aversa, Giulio Marchese, Sara Biamino, Mariangela Lombardi e Paolo Fino. "Microstructure and Mechanical Properties of AISI 316L Produced by Directed Energy Deposition-Based Additive Manufacturing: A Review". Applied Sciences 10, n.º 9 (9 de maio de 2020): 3310. http://dx.doi.org/10.3390/app10093310.
Texto completo da fonteSarzyński, Bartłomiej, Lucjan Śnieżek e Krzysztof Grzelak. "Metal Additive Manufacturing (MAM) Applications in Production of Vehicle Parts and Components—A Review". Metals 14, n.º 2 (5 de fevereiro de 2024): 195. http://dx.doi.org/10.3390/met14020195.
Texto completo da fonteJeon, Seoyeon, e Hyunjoo Choi. "Trends in Materials Modeling and Computation for Metal Additive Manufacturing". journal of Korean Powder Metallurgy Institute 31, n.º 3 (30 de junho de 2024): 213–19. http://dx.doi.org/10.4150/jpm.2024.00150.
Texto completo da fonteUralde, Virginia, Fernando Veiga, Alfredo Suarez, Eider Aldalur e Tomas Ballesteros. "Symmetry Analysis in Wire Arc Direct Energy Deposition for Overlapping and Oscillatory Strategies in Mild Steel". Symmetry 15, n.º 6 (9 de junho de 2023): 1231. http://dx.doi.org/10.3390/sym15061231.
Texto completo da fonteAyed, Achraf, Guénolé Bras, Henri Bernard, Pierre Michaud, Yannick Balcaen e Joel Alexis. "Additive Manufacturing of Ti6Al4V with Wire Laser Metal Deposition Process". Materials Science Forum 1016 (janeiro de 2021): 24–29. http://dx.doi.org/10.4028/www.scientific.net/msf.1016.24.
Texto completo da fonteGong, Xi, Willem Groeneveld-Meijer e Guha Manogharan. "Additive manufacturing: Application and validation of machine learning-based process-structure-property linkages in Ti-6Al-4V". Materials Science in Additive Manufacturing 2, n.º 3 (29 de setembro de 2023): 0999. http://dx.doi.org/10.36922/msam.0999.
Texto completo da fonteMutswatiwa, Lovejoy, Judith A. Todd, Edward Reutzel e Christopher M. Kube. "Influence of ultrasonic parameters on microstructural refinement and defect elimination in ultrasound-assisted laser-based metal additive manufacturing". Journal of the Acoustical Society of America 155, n.º 3_Supplement (1 de março de 2024): A266. http://dx.doi.org/10.1121/10.0027449.
Texto completo da fonteFurumoto, Tatsuaki. "Special Issue on Additive Manufacturing with Metals". International Journal of Automation Technology 13, n.º 3 (5 de maio de 2019): 329. http://dx.doi.org/10.20965/ijat.2019.p0329.
Texto completo da fontePark, Seong-Hyun, Kiyoon Yi, Peipei Liu, Gwanghwo Choi, Kyung-Young Jhang e Hoon Sohn. "In situ and layer-by-layer grain size estimation in additively manufactured metal components using femtosecond laser ultrasonics". Journal of Laser Applications 35, n.º 2 (maio de 2023): 022002. http://dx.doi.org/10.2351/7.0000938.
Texto completo da fonteKhanna, Navneet, Harsh Salvi, Büşra Karaş, Ishrat Fairoz e Alborz Shokrani. "Cost Modelling for Powder Bed Fusion and Directed Energy Deposition Additive Manufacturing". Journal of Manufacturing and Materials Processing 8, n.º 4 (4 de julho de 2024): 142. http://dx.doi.org/10.3390/jmmp8040142.
Texto completo da fonteKim, Kang-Hyung, Chan-Hyun Jung, Dae-Yong Jeong e Soong-Keun Hyun. "Preventing Evaporation Products for High-Quality Metal Film in Directed Energy Deposition: A Review". Metals 11, n.º 2 (19 de fevereiro de 2021): 353. http://dx.doi.org/10.3390/met11020353.
Texto completo da fonteSidun, Muhammad Irfan Syahmi, e Ismayuzri Ishak. "Bead Characterization for Wire Based Laser Directed Energy Deposition Fabrication Process". Jurnal Teknologi 13, n.º 2 (30 de dezembro de 2023): 58–64. http://dx.doi.org/10.35134/jitekin.v13i2.98.
Texto completo da fonteWang, Min, Qican Zhang, Qian Li, Zhoujie Wu, Chaowen Chen, Jin Xu e Junpeng Xue. "Research on Morphology Detection of Metal Additive Manufacturing Process Based on Fringe Projection and Binocular Vision". Applied Sciences 12, n.º 18 (14 de setembro de 2022): 9232. http://dx.doi.org/10.3390/app12189232.
Texto completo da fontevan Ree, Marelizé, Sonette du Preez e Johan L. du Plessis. "Emissions and Exposures Associated with the Use of an Inconel Powder during Directed Energy Deposition Additive Manufacturing". International Journal of Environmental Research and Public Health 20, n.º 13 (22 de junho de 2023): 6206. http://dx.doi.org/10.3390/ijerph20136206.
Texto completo da fonteAldalur, Eider, Fernando Veiga, Alfredo Suárez, Jon Bilbao e Aitzol Lamikiz. "Analysis of the Wall Geometry with Different Strategies for High Deposition Wire Arc Additive Manufacturing of Mild Steel". Metals 10, n.º 7 (4 de julho de 2020): 892. http://dx.doi.org/10.3390/met10070892.
Texto completo da fonteKovalchuk, Dmytro, Orest Ivasishin e Dmytro Savvakin. "Microstructure and Properties of 3D Ti-6Al-4V Articles Produced with Advanced Co-axial Electron Beam & Wire Additive Manufacturing Technology". MATEC Web of Conferences 321 (2020): 03014. http://dx.doi.org/10.1051/matecconf/202032103014.
Texto completo da fonteOstolaza, Marta, Jon Iñaki Arrizubieta, Aitzol Lamikiz, Soraya Plaza e Naiara Ortega. "Latest Developments to Manufacture Metal Matrix Composites and Functionally Graded Materials through AM: A State-of-the-Art Review". Materials 16, n.º 4 (20 de fevereiro de 2023): 1746. http://dx.doi.org/10.3390/ma16041746.
Texto completo da fonteSon, Jong-Youn, Ki-Yong Lee, Seung Hwan Lee e Chang-Hwan Choi. "Effects of Oxidized Metal Powders on Pore Defects in Powder-Fed Direct Energy Deposition". Micromachines 15, n.º 2 (6 de fevereiro de 2024): 243. http://dx.doi.org/10.3390/mi15020243.
Texto completo da fonteLhabitant, Solène, Alain Toufine e Anis Hor. "Heat Treatments of P295GH Steel Made by Directed Energy Deposition: Metallography and Hardness". Materials Science Forum 1046 (22 de setembro de 2021): 65–70. http://dx.doi.org/10.4028/www.scientific.net/msf.1046.65.
Texto completo da fonteRodríguez-González, Paula, Elisa María Ruiz-Navas e Elena Gordo. "Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review". Materials 16, n.º 4 (6 de fevereiro de 2023): 1375. http://dx.doi.org/10.3390/ma16041375.
Texto completo da fonteAng, Yao Ting, Swee Leong Sing e Joel Choon Wee Lim. "Process study for directed energy deposition of 316L stainless steel with TiB2 metal matrix composites". Materials Science in Additive Manufacturing 1, n.º 2 (29 de junho de 2022): 13. http://dx.doi.org/10.18063/msam.v1i2.13.
Texto completo da fonteKwon, Yongjae, SeongSeon Shin, SangEun Joo, JongHoon Lee, JunHo Hwang e HyunDeok Kim. "Optimization of Additive Manufacturing of Precipitation Hardening Type STS630 by DED (Direct Energy Deposition) Process". Journal of Welding and Joining 39, n.º 6 (30 de dezembro de 2021): 590–96. http://dx.doi.org/10.5781/jwj.2021.39.6.3.
Texto completo da fonteAydogan, Beytullah, e Himanshu Sahasrabudhe. "Enabling Multi-Material Structures of Co-Based Superalloy Using Laser Directed Energy Deposition Additive Manufacturing". Metals 11, n.º 11 (27 de outubro de 2021): 1717. http://dx.doi.org/10.3390/met11111717.
Texto completo da fonteIllarionov, Anatoliy G., Stepan I. Stepanov, Inna A. Naschetnikova, Artemiy A. Popov, Prasanth Soundappan, K. H. Thulasi Raman e Satyam Suwas. "A Review—Additive Manufacturing of Intermetallic Alloys Based on Orthorhombic Titanium Aluminide Ti2AlNb". Materials 16, n.º 3 (20 de janeiro de 2023): 991. http://dx.doi.org/10.3390/ma16030991.
Texto completo da fonteTariq, Usman, Sung-Heng Wu, Muhammad Arif Mahmood, Michael M. Woodworth e Frank Liou. "Effect of Pre-Heating on Residual Stresses and Deformation in Laser-Based Directed Energy Deposition Repair: A Comparative Analysis". Materials 17, n.º 10 (7 de maio de 2024): 2179. http://dx.doi.org/10.3390/ma17102179.
Texto completo da fonteGrüger, Lennart, Benjamin Sydow, Ralf Woll e Johannes Buhl. "Design of a Cost-Effective and Statistically Validated Test Specification with Selected Machine Elements to Evaluate the Influence of the Manufacturing Process with a Focus on Additive Manufacturing". Metals 13, n.º 11 (17 de novembro de 2023): 1900. http://dx.doi.org/10.3390/met13111900.
Texto completo da fonteBorovkov, Herman, Aitor Garcia de la Yedra, Xabier Zurutuza, Xabier Angulo, Pedro Alvarez, Juan Carlos Pereira e Fernando Cortes. "In-Line Height Measurement Technique for Directed Energy Deposition Processes". Journal of Manufacturing and Materials Processing 5, n.º 3 (5 de agosto de 2021): 85. http://dx.doi.org/10.3390/jmmp5030085.
Texto completo da fonteLee, Jinsun, Md Shahjahan Hossain, Mohammad Taheri, Awse Jameel, Manas Lakshmipathy e Hossein Taheri. "Characterization of Surface Topography Features for the Effect of Process Parameters and Their Correlation to Quality Monitoring in Metal Additive Manufacturing". Metrology 2, n.º 1 (7 de fevereiro de 2022): 73–83. http://dx.doi.org/10.3390/metrology2010005.
Texto completo da fonteJing, Hang, Peng Ge, Zhao Zhang, Jun-Qi Chen, Zhong-Ming Liu e Wei-Wei Liu. "Numerical Studies of the Effects of the Substrate Structure on the Residual Stress in Laser Directed Energy Additive Manufacturing of Thin-Walled Products". Metals 12, n.º 3 (9 de março de 2022): 462. http://dx.doi.org/10.3390/met12030462.
Texto completo da fonteRatnala, Dilipkumar Choudary, Joel Andersson e Shrikant Joshi. "Development of Functionally Graded Metal-Ceramic Systems by Directed Energy Deposition: A Review". Materials Science Forum 1107 (6 de dezembro de 2023): 105–10. http://dx.doi.org/10.4028/p-4ekatd.
Texto completo da fonteKlein Fiorentin, Felipe, Duarte Maciel, Jorge Gil, Miguel Figueiredo, Filippo Berto e Abílio de Jesus. "Fatigue Assessment of Inconel 625 Produced by Directed Energy Deposition from Miniaturized Specimens". Metals 12, n.º 1 (14 de janeiro de 2022): 156. http://dx.doi.org/10.3390/met12010156.
Texto completo da fontePrice, Stephen, Kiran Judd, Matthew Gleason, Kyle Tsaknopoulos, Danielle L. Cote e Rodica Neamtu. "Advancing Wire Arc Directed Energy Deposition: Analyzing Impact of Materials and Parameters on Bead Shape". Metals 14, n.º 3 (28 de fevereiro de 2024): 282. http://dx.doi.org/10.3390/met14030282.
Texto completo da fonteWeiss, Klaus-Peter, Nadezda Bagrets e Camelia Schulz. "Cryogenic thermo-physical properties of additive manufactured materials". IOP Conference Series: Materials Science and Engineering 1302, n.º 1 (1 de maio de 2024): 012005. http://dx.doi.org/10.1088/1757-899x/1302/1/012005.
Texto completo da fonteSotelo, Luz D., Cody Pratt, Rakeshkumar Karunakaran, Michael P. Sealy e Joseph A. Turner. "Microstructure quality assessment for hybrid additive manufactured Ti6Al4V components via ultrasonics". Journal of the Acoustical Society of America 154, n.º 4_supplement (1 de outubro de 2023): A294. http://dx.doi.org/10.1121/10.0023573.
Texto completo da fonteZhang, Xiaoyu, Dichen Li e Weijun Zhu. "Numerical Modeling Design for the Hybrid Additive Manufacturing of Laser Directed Energy Deposition and Shot Peening Forming Fe–Cr–Ni–B–Si Alloy". Materials 13, n.º 21 (30 de outubro de 2020): 4877. http://dx.doi.org/10.3390/ma13214877.
Texto completo da fonteLu, Xufei, Miguel Cervera, Michele Chiumenti, Junjie Li, Xianglin Ji, Guohao Zhang e Xin Lin. "Modeling of the Effect of the Building Strategy on the Thermomechanical Response of Ti-6Al-4V Rectangular Parts Manufactured by Laser Directed Energy Deposition". Metals 10, n.º 12 (6 de dezembro de 2020): 1643. http://dx.doi.org/10.3390/met10121643.
Texto completo da fonteBen Hammouda, Adem, Hatem Mrad, Haykel Marouani, Ahmed Frikha e Tikou Belem. "Process Optimization and Distortion Prediction in Directed Energy Deposition". Journal of Manufacturing and Materials Processing 8, n.º 3 (30 de maio de 2024): 116. http://dx.doi.org/10.3390/jmmp8030116.
Texto completo da fonteLangebeck, Anika, Annika Bohlen, Hannes Freisse e Frank Vollertsen. "Additive manufacturing with the lightweight material aluminium alloy EN AW-7075". Welding in the World 64, n.º 3 (4 de dezembro de 2019): 429–36. http://dx.doi.org/10.1007/s40194-019-00831-z.
Texto completo da fonteKoike, Ryo, Iori Unotoro, Yasuhiro Kakinuma e Yohei Oda. "Graded Inconel 625 – SUS316L Joint Fabricated Using Directed Energy Deposition". International Journal of Automation Technology 13, n.º 3 (5 de maio de 2019): 338–45. http://dx.doi.org/10.20965/ijat.2019.p0338.
Texto completo da fonteKim, Kang-Hyung, Chan-Hyun Jung, Dae-Yong Jeong e Soong-Keun Hyun. "Causes and Measures of Fume in Directed Energy Deposition: A Review". Korean Journal of Metals and Materials 58, n.º 6 (5 de junho de 2020): 383–96. http://dx.doi.org/10.3365/kjmm.2020.58.6.383.
Texto completo da fonteShin, Hyewon, Junsoo Ahn, Seung Woo Beak e Sang Won Lee. "Development of 1D-convolutional Neural Network-based Height Profile Prediction Model in Directed Energy Deposition Process Using Melt-pool Image Data". International Journal of Precision Engineering and Manufacturing-Smart Technology 2, n.º 1 (1 de janeiro de 2024): 57–65. http://dx.doi.org/10.57062/ijpem-st.2023.0129.
Texto completo da fonteBecker, Julia, Sven Schmigalla, Sabine Schultze, Silja-Katharina Rittinghaus, Andreas Weisheit, Janett Schmelzer e Manja Krüger. "High Temperature Oxidation Performance of an Additively Manufactured Mo–9Si–8B Alloy". Oxidation of Metals 97, n.º 1-2 (12 de outubro de 2021): 167–81. http://dx.doi.org/10.1007/s11085-021-10082-3.
Texto completo da fonte