Livros sobre o tema "Damping (Mechanics)"

G, Jones David I., e Henderson John P. 1934-, eds. Vibration damping. New York: Wiley, 1985.

T, Sun C. Vibration damping of structural elements. Englewood Cliffs, N.J: Prentice Hall PTR, 1995.

D, Johnson Conor, American Society of Mechanical Engineers., Society of Photo-optical Instrumentation Engineers. e U.S. Air Force Wright Laboratory., eds. Smart structures and materials, 1996.: 26-27 February 1996, San Diego, California. Bellingham, Wash., USA: SPIE, 1996.

Córdova, Carlos Juán Cornejo. Elastodynamics with hysteretic damping. Delft, Netherlands: DUP Science, 2002.

T, Sun C. Vibration damping of structural elements. Englewood Cliffs, N.J: PTR Prentice Hall, 1995.

Banks, H. Thomas. On damping mechanisms in beams. [Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1989.

Chen, Goong. Vibration and damping in distributed systems. Boca Raton, FL: CRC Press, 1993.

1946-, Kinra Vikram K., e Wolfenden Alan 1940-, eds. M³D: Mechanics and mechanisms of material damping. Philadelphia: ASTM, 1992.

Rivin, Eugene I. Stiffness and damping in mechanical design. New York: Marcel Dekker, 1999.

Dew, Dwight D. Strain dependent damping characteristics of a high damping manganese-copper alloy. Monterey, Calif: Naval Postgraduate School, 1986.

Structural vibration: Analysis and damping. London: Arnold, 1996.

Henrichfreise, Hermann. Aktive Schwingungsdämpfung an einem elastischen Knickarmroboter. Braunschweig: F. Vieweg, 1989.

W, De Silva Clarence, ed. Vibration damping, control, and design. Boca Raton: Taylor & Francis, 2007.

M, Eke Estelle, e United States. National Aeronautics and Space Administration., eds. Damping characterization in large structures: Final technical report ... January 1, 1989 - December 31, 1990. Tuskegee, Ala: School of Engineering and Architecture, Tuskegee University, 1991.

United States. National Aeronautics and Space Administration., ed. Measurement of damping of graphite epoxy materials: Progress report no. 9. [Washington, DC: National Aeronautics and Space Administration, 1985.

George C. Marshall Space Flight Center., ed. Measurement of damping of graphite epoxy materials: [progress report no. 6]. [Huntsville, AL?: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1985.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

Black, Cameron J. Viscous heating of fluid dampers under wind and seismic loading: Experimental studies, mathematical modeling and design formulae. Berkeley: Dept. of Civil and Environmental Engineering, University of California, 2005.

T, Soong T., e Constantinou M. C, eds. Passive and active structural vibration control in civil engineering. Wien: Springer-Verlag, 1994.

Inman, Daniel J. Vibration with Control. New York: John Wiley & Sons, Ltd., 2006.

Abernathy, J. Michael. Computational fluid mechanics utilizing the variational principle of modeling damping seals: Final report. Huntsville, AL: Continuum, Inc., 1986.

Abernathy, J. Michael. Computational fluid mechanics utilizing the variational principle of modeling damping seals. Marshall Space Flight Center, AL: The Center, 1985.

D, Buehrle Ralph, e Langley Research Center, eds. Structural damping studies at cryogenic temperatures. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Wolfenden, A., e VK Kinra, eds. M3D III: Mechanics and Mechanisms of Material Damping. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1997. http://dx.doi.org/10.1520/stp1304-eb.

K, Karim-Panahi, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., American Society of Mechanical Engineers. Materials Division., American Society of Mechanical Engineers. Nondestructive Evaluation Engineering Division. e Pressure Vessels and Piping Conference (1995 : Honolulu, Hawaii), eds. Advances in vibration issues, active and passive vibration mitigation, damping and seismic isolation: Presented at the 1995 Joint ASME/JSME Pressure Vessels and Piping Conference, Honolulu, Hawaii, July 23-27, 1995. New York: American Society of Mechanical Engineers, 1995.

G, Gordon Colin, e Society of Photo-optical Instrumentation Engineers., eds. Vibration monitoring and control: 28-29 July 1994, San Diego, California. Bellingham, Wash: SPIE--the International Society for Optical Engineering, 1994.

M, Alabuzhev P., e Rivin Eugene I, eds. Vibration protecting and measuring systems with quasi-zero stiffness. New York: Hemisphere Pub. Corp., 1989.

Tondl, Aleš. Quenching of self-excited vibrations. Amsterdam: Elsevier, 1991.

Osiński, Jerzy. Drgania parametryczne tłumionych układów dyskretno-ciągłych. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1989.

F, Hara, American Society of Mechanical Engineers. Prssure Vessels and Piping Division. e Pressure Vessels and Piping Conference (1991 : San Diego, Calif.), eds. Active and passive damping, 1991: Presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991. New York, N.Y: American Society of Mechanical Engineers, 1991.

Vertrieb, VDI-Gesellschaft Entwicklung Konstruktion, ed. Dämpfung von Schwingungen bei Maschinen und Bauwerken: Tagung Nürnberg, 9. und 10. April 1987. Düsseldorf: VDI Verlag, 1987.

M, Reznikov L., ed. Dinamicheskie gasiteli kolebaniĭ: Teorii͡a︡ i tekhnicheskie prilozhenii͡a︡. Moskva: "Nauka," Glav. red. fiziko-matematicheskoĭ lit-ry, 1988.

Matveev, Valentin Vladimirovich. Dempfirovanie kolebaniĭ deformiruemykh tel. Kiev: Nauk. dumka, 1985.

Duan, Yuanfeng. Vibration control of stay cables using semi-active magneto-rheological (MR) dampers. Hong Kong: Dept. of Civil & Structural Engineering, the Hong Kong Polytechnic University, 2004.

Mechanical vibrations. Hoboken, NJ: John Wiley, 2006.

B, Bhagat Ram, ASM International. Materials Science Division., ASM International. Structural Materials Division. e ASM Materials Week (1992 : Chicago, Ill.), eds. Damping of multiphase inorganic materials: Proceedings of the Damping of Multiphase Inorganic Materials Symposium, ASM Materials Week, 2-5 November 1992, Chicago, Illinois, USA. Materials Park, Ohio: ASM International, 1993.

United States. National Aeronautics and Space Administration., ed. Nonlinear damping model for flexible structures: Technical report. Los, Angeles, Calif: Flight Sysltems Research Laboratory, University of California, Los Angeles, School of Engineering and Applied Science, 1990.

A, Derby Eddy, e Society of Photo-optical Instrumentation Engineers., eds. Optomechanical engineering and vibration control: 20-23 July 1999, Denver, Colorado. Bellingham, Wash., USA: SPIE, 1999.

C, Goldsby Jon, e United States. National Aeronautics and Space Administration., eds. Damping mechanisms in chemically vapor deposited SiC fibers. [Washington, D.C.?]: NASA, 1993.

Osinski. Damping Vibrations. Taylor & Francis, 1998.

Damping Vibrations. Taylor & Francis, 1998.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Osinski, Z. Damping of Vibrations. Taylor & Francis Group, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Incorporated, John, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Limited, John, 2018.

Baz, Amr M. Active and Passive Vibration Damping. Wiley & Sons, Incorporated, John, 2018.

Silva, Clarence W. de. Vibration Damping, Control, and Design. Taylor & Francis Group, 2007.