Literatura científica selecionada sobre o tema "Custom-Made architecture"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Custom-Made architecture".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Custom-Made architecture"
Mvelase, Promise, Nomusa Dlodlo, Quentin Williams e Matthew O. Adigun. "Custom-Made Cloud Enterprise Architecture for Small Medium and Micro Enterprises". International Journal of Cloud Applications and Computing 1, n.º 3 (julho de 2011): 52–63. http://dx.doi.org/10.4018/ijcac.2011070105.
Texto completo da fonteOliveira, Douglas Voss de, José Thiers Carneiro Junior, Eber Coelho Paraguassu e Luis Raimundo Serra Rabelo. "Ankylosed joint replacement with custom total joint prosthesis and custom miniplates." Research, Society and Development 9, n.º 6 (9 de abril de 2020): e15963095. http://dx.doi.org/10.33448/rsd-v9i6.3095.
Texto completo da fonteSonar, Prasanna Ravindra, e Aarati S. Panchbhai. "Rehabilitation of Partially Edentulous Esthetic Zone with Custom-made Abutment in Young Patient". Journal of Datta Meghe Institute of Medical Sciences University 18, n.º 4 (2023): 783–86. http://dx.doi.org/10.4103/jdmimsu.jdmimsu_423_23.
Texto completo da fonteManataki, Merope, Nikos Papadopoulos, Nikolaos Schetakis e Alessio Di Iorio. "Exploring Deep Learning Models on GPR Data: A Comparative Study of AlexNet and VGG on a Dataset from Archaeological Sites". Remote Sensing 15, n.º 12 (20 de junho de 2023): 3193. http://dx.doi.org/10.3390/rs15123193.
Texto completo da fonteSASTRY, RAGHU, e N. RANGANATHAN. "PMAC: A POLYGON MATCHING CHIP". International Journal of Pattern Recognition and Artificial Intelligence 09, n.º 02 (abril de 1995): 367–85. http://dx.doi.org/10.1142/s0218001495000171.
Texto completo da fonteGopal, Venu, Praveen Ganesh, Muralidhara Nagarjuna, Kiran Kumar, Samarth Shetty e Paul C. Salins. "Custom made orthotic device for maintaining skull architecture during the postoperative period in infants undergoing craniosynostosis surgery". Journal of Oral Biology and Craniofacial Research 5, n.º 2 (maio de 2015): 75–80. http://dx.doi.org/10.1016/j.jobcr.2015.04.004.
Texto completo da fonteLehrer, Ute Angelika. "Images of the Periphery: The Architecture of Flex Space in Switzerland". Environment and Planning D: Society and Space 12, n.º 2 (abril de 1994): 187–205. http://dx.doi.org/10.1068/d120187.
Texto completo da fonteJakeš, Erik. "Glass Fibre Reinforced Concrete Products for Construction Industry and Architecture". Applied Mechanics and Materials 820 (janeiro de 2016): 75–80. http://dx.doi.org/10.4028/www.scientific.net/amm.820.75.
Texto completo da fonteJo, Yong Hwan, Se Yeon Cho e Byoung Wook Choi. "Towards a ROS2-based software architecture for service robots". Bulletin of Electrical Engineering and Informatics 12, n.º 5 (1 de outubro de 2023): 3027–38. http://dx.doi.org/10.11591/eei.v12i5.5590.
Texto completo da fonteHummel, Karin, Manuela Pollak e Johannes Krahofer. "A Distributed Architecture for Human-Drone Teaming: Timing Challenges and Interaction Opportunities". Sensors 19, n.º 6 (20 de março de 2019): 1379. http://dx.doi.org/10.3390/s19061379.
Texto completo da fonteTeses / dissertações sobre o assunto "Custom-Made architecture"
Cheikho, Karim. "Conception de structures souples élastiques et applications en biomécanique". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0147.
Texto completo da fonteThe selection of the most-suitable porous bone scaffold for regenerative medicine applied to a given clinical application is challenging, which has motivated numerous studies especially for the repair of bone defects. Several designs have been proposed over the last decade, including structures with pore size gradients that have been proved to facilitate nutrient transport from the periphery to the core of the scaffold, and therefore to enhance tissue regeneration. The framework used to design such porous scaffolds with pore size gradients is limited by the range of the reachable pore distribution and mechanical properties.In this work, we presented a design framework to generate various three-dimensional porous scaffolds structures including cylindrical graded scaffolds from the transformations of unit cells. We proposed a methodology to generate porous scaffolds by multilayer repetition of circular cross sections, resulting in tunable anisotropy depending on the intended clinical application. We identified the apparent mechanical properties of different porous scaffold configurations using an original numerical method, highlighting the versatility of the design procedure that allows for separate tuning of longitudinal and transverse mechanical properties of porous scaffold.In order to investigate the ability of common additive manufacturing techniques to fabricate the proposed structures, we have elaborated scaffolds using FDM (fused deposition modeling) and SLA (stereolithography) techniques, we have performed experimental mechanical tests to be confronted to the predictions issued from simulations. In spite of the geometrical differences observed between the initial design and the obtained structures, the apparent properties of the structures obtained by the SLA technique agree with those predicted by the proposed computational method.Promising perspectives have been proposed concerning the design of self-fitting scaffolds that can be used for clinical applications, particularly to repair bone defects using mini-invasive surgery
Livros sobre o assunto "Custom-Made architecture"
1955-, Pierre Catherine, Agence Nicolas Michelin et Associés e Arc en rêve centre d'architecture, eds. Cinq sur cinq : dix projets sur mesure, architecture et urbanisme =: Five by five : ten custom-made projects architecture and urban planning. Paris: Archibooks, 2008.
Encontre o texto completo da fonteNicolas, Michelin, Pierre Catherine, Agence Nicolas Michelin et Associés. e Arc en rêve centre d'architecture., eds. Cinq sur cinq : dix projets sur mesure, architecture et urbanisme =: Five by five : ten custom-made projects architecture and urban planning. Paris: Archibooks, 2008.
Encontre o texto completo da fonteCinq sur cinq : dix projets sur mesure, architecture et urbanisme =: Five by five : ten custom-made projects architecture and urban planning. Paris: Archibooks, 2008.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Custom-Made architecture"
Ruitinga, Volker, e Emma Chris Avramiea. "Custom-Made Printheads Empowering 3d Printed Concrete: Innovations in Digital Design and Fabrication of Complex Prefabricated Elements". In Coding Architecture, 239–61. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-47913-7_13.
Texto completo da fonteArvind, Aniketh. "A Deep Neural Architecture Search Net-Based Wearable Object Classification System for the Visually Impaired". In Communications in Computer and Information Science, 198–213. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-46338-9_15.
Texto completo da fonteZanetto, Francesco. "Low-Noise Mixed-Signal Electronics for Closed-Loop Control of Complex Photonic Circuits". In Special Topics in Information Technology, 55–64. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85918-3_5.
Texto completo da fonteMvelase, Promise, Nomusa Dlodlo, Quentin Williams e Matthew O. Adigun. "Custom-Made Cloud Enterprise Architecture for Small Medium and Micro Enterprises". In Cloud Computing Advancements in Design, Implementation, and Technologies, 205–17. IGI Global, 2013. http://dx.doi.org/10.4018/978-1-4666-1879-4.ch015.
Texto completo da fonteMvelase, Promise, Nomusa Dlodlo, Quentin Williams e Matthew O. Adigun. "Custom-Made Cloud Enterprise Architecture for Small Medium and Micro Enterprises". In Grid and Cloud Computing, 589–601. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0879-5.ch303.
Texto completo da fontePetersen, Wesley, e Peter Arbenz. "Shared Memory Parallelism". In Introduction to Parallel Computing. Oxford University Press, 2004. http://dx.doi.org/10.1093/oso/9780198515760.003.0009.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Custom-Made architecture"
Gulling, Dana K. "CRM in Architecture: Data Collection of Customized Repetitive Manufacturing Case Studies Analyzed". In 109th ACSA Annual Meeting Proceedings. ACSA Press, 2021. http://dx.doi.org/10.35483/acsa.am.109.22.
Texto completo da fonteBeck, Joseph R., Daniel F. Walczyk, Casey J. Hoffman e Steve J. Buelte. "Ultrasonic Bonding of Membrane Electrode Assemblies for Low Temperature PEM Fuel Cells". In ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/fuelcell2012-91308.
Texto completo da fonteGupta, Aditya, Ananthavijayan Sridhar e Dereje Agonafer. "CFD Optimization of the Cooling of Yosemite Open Compute Server". In ASME 2017 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2017 Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/ipack2017-74254.
Texto completo da fonteGreen, J. T., I. A. Rybak e C. Glaesman. "Backup-Ring Optimization for High-Temperature and High-Pressure Applications Through Dynamic Composition Modification in Composite 3d Printing". In International Petroleum Technology Conference. IPTC, 2024. http://dx.doi.org/10.2523/iptc-23353-ms.
Texto completo da fonteButean, Alex, Adrian Florea, Marco leon Olescu e Nicolae adrian Tocu. "IMPROVING TRAINING METHODS FOR INDUSTRY WORKERS THOUGH AI ASSISTED MULTI-STAGE VIRTUAL REALITY SIMULATIONS". In eLSE 2019. Carol I National Defence University Publishing House, 2019. http://dx.doi.org/10.12753/2066-026x-19-007.
Texto completo da fonteSato, S., S. Jovanovic, J. Lang e Z. Spakovszky. "Demonstration of a Palm-Sized 30 Watt Air-to-Power Turbine Generator". In ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-22925.
Texto completo da fonteRay, Unmesa, e Abdulaziz Banawi. "Development of A Smart Database for Construction Inventory Management Using Deep Learning to Eliminate Supply Chain Bottlenecks Post COVID-19". In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1002520.
Texto completo da fonteHaure, J. M. "RCCE-E 2005 Creator of Confidence Between Nuclear Safety Authority, Owner, and Suppliers". In 18th International Conference on Nuclear Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/icone18-30369.
Texto completo da fonteSchuberth, Maximilian Georg, Håkon Sunde Bakka, Claire Emma Birnie, Stefan Dümmong, Kjetil Eik Haavik, Qin Li, Johan-Fredrik Synnevåg, Yanis Saadallah, Lars Vinje e Kevin Constable. "A Real-Time Fiber Optical System for Wellbore Monitoring: A Johan Sverdrup Case Study". In SPE Offshore Europe Conference & Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205405-ms.
Texto completo da fonteWills, Jackson, Nathan Tom e Senu Sirnivas. "Power Take-Off Design Study for a Small-Scale Oscillating Surge Wave Energy Converter for Powering the Blue Economy Applications". In ASME 2023 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/imece2023-112259.
Texto completo da fonte