Literatura científica selecionada sobre o tema "Curettes"

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Curettes".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Curettes"

1

Wink, Cherie, Kairong Lin, Benjamin E. Dolan, Kathryn Osann, Ali A. Habib e Petra Wilder-Smith. "Evaluating the Ergonomic Performance of a Novel Periodontal Curette with Adaptive Handle Design". Hygiene 4, n.º 2 (22 de abril de 2024): 164–77. http://dx.doi.org/10.3390/hygiene4020013.

Texto completo da fonte
Resumo:
(1) Background: Periodontal instrumentation with dental curettes is associated with discomfort, fatigue, and musculoskeletal diseases. The goal of this study was to compare comfort, fatigue, and muscle work using three different curettes. (2) Methods: Eight hygienists each scaled three typodonts using the three different curettes. Curette A was a prototype with a novel adaptive design, Curette B had a conventional stainless-steel design, and Curette C featured a conventional silicon-covered handle. Time-based work in four muscles, comfort, fatigue, tactile feedback, grip and blade position, and pinch and grasp strength were recorded. Statistical analysis was performed using a General Linear Model (GLIM) and Tukey’s post hoc test. The level of significance was set at p < 0.05. (3) Results: Comfort, correct grasp, fingertip placement, and blade-to-tooth adaptation were significantly better with Curette A (p < 0.05). While pinch and grasp strength were significantly reduced post-instrumentation for Curettes B and C (p < 0.05), they remained unchanged for Curette A. Curette A required significantly less total muscle work and work in individual muscles, resulting in significantly less post-instrumentation fatigue than for Curettes B and C, but similar levels of tactile feedback (p < 0.05). (4) Conclusions: The ergonomic performance of a prototype adaptive periodontal curette was significantly better than that of two conventional instruments with rigid handle designs.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Sampaio, José Eduardo Cezar, Roberto Antonio Andrade Acevedo e Jamil A. Shibli. "Scanning Electron Microscope Assessment of Several Resharpening Techniques on the Cutting Edges of Gracey Curettes". Journal of Contemporary Dental Practice 8, n.º 7 (2007): 70–77. http://dx.doi.org/10.5005/jcdp-8-7-70.

Texto completo da fonte
Resumo:
Abstract Aim Treatment of periodontal diseases is based on efficient scaling and root planing (SRP) and adequate maintenance of the patient. The effectiveness of SRP is influenced by operator skill, access to the subgingival area, root anatomy, and the quality and type of instrument used for SRP. The aim of this study was to evaluate the cutting edges of Gracey curettes after manufacturing and after resharpening using several techniques. Methods and Material The cutting edges of a total of 41 new #5-6 stainless steel Gracey curettes were evaluated blindly using scanning electron microscopy (SEM). The quality of the cutting edges was evaluated blindly by a calibrated examiner using micrographs. Data were analyzed using a Kruskal Wallis test and nonparametric two-way multiple comparisons. Results and Conclusions Different sharpening techniques had significantly different effects on the sharpeness of cutting edges (p<0.05). Sharpening by passing the lateral face of curettes over a sharpening stone and then a #299 Arkansas stone produced a high frequency of smooth, sharp edges or slightly irregular edges between the lateral and coronal faces of the curettes. Sharpening by passing a blunt stone over the curette's lateral face produced the poorest quality cutting edge (a bevel). Sharpening of the coronal curette face produced extremely irregular cutting edges and non-functional wire edges. Sharpening with rotary devices produced extremely irregular cutting edges. Citation Andrade Acevedo RA, Sampaio JEC, Shibli JA. Scanning Electron Microscope Assessment of Several Resharpening Techniques on the Cutting Edges of Gracey Curettes. J Contemp Dent Pract 2007 November; (8)7:070-077.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Lin, Kairong, Cherie Wink, Ben Dolan, Kathryn Osann, Ali A. Habib, Jill Gehrig e Petra Wilder-Smith. "A Novel Ergonomic Curette Design Reduces Dental Prophylaxis-Induced Muscle Work and Fatigue". Dentistry Journal 11, n.º 12 (28 de novembro de 2023): 272. http://dx.doi.org/10.3390/dj11120272.

Texto completo da fonte
Resumo:
Background: To compare fatigue, comfort, and muscle work associated with the use of two periodontal curettes during scaling: one with a novel adaptive design, the other with a conventional non-adaptive design. Methods: Twelve hygienists scaled a typodont using two Universal Barnhart 5/6 curettes: (1) a prototype featuring an adaptive silicone-covered handle (Curette A), and (2) a stainless-steel curette (Curette B). Surface Electromyography (sEMG) traced muscle work. Hand positions, fatigue, comfort, pinch, and grasp strength were recorded. Paired t-tests and a repeated measures ANOVA with covariates were tested for differences. The significance level was set at p < 0.05. Results: Curette A performed significantly better in all categories. Pinch and grasp strength and fatigue were significantly reduced post-instrumentation for Curette B. Curette A required significantly less (i) total muscle work and (ii) work in individual muscles. Comfort, correct grasp, and blade adaptation were significantly better using Curette A. Conclusions: A curette featuring a novel adaptive handle design demonstrated significantly improved ergonomic performance. Additional clinical studies are needed to solidify our understanding of the potential short- and long-term benefits of the novel curette handle design. Practical Implications: A novel adaptive curette handle design that enables the clinician to adapt the instrument across the index finger may reduce musculoskeletal burden and fatigue, as well as improve comfort during periodontal instrumentation.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Ota, Rizou, Eri Iwaki, Kentaro Sakai, Tomohiro Haraguchi, Yasuyuki Kaneko, Satoshi Sekiguchi, Ryoji Yamaguchi e Kiyokazu Naganobu. "Dural Changes Induced by an Ultrasonic Bone Curette in an Excised Porcine Spinal Cord". Veterinary Sciences 9, n.º 11 (28 de outubro de 2022): 601. http://dx.doi.org/10.3390/vetsci9110601.

Texto completo da fonte
Resumo:
In spinal surgery, ultrasonic bone curettes are considered unlikely to cause mechanical injury to the dura; however, there is little evidence to support this claim. We investigated the effect of direct contact with an ultrasonic bone curette on the dura and the protective effect of covering the dura with a cotton pattie using an excised porcine spinal cord. The ultrasonic bone curette was pressed against the porcine spinal cord with constant force and activated for 1 s, with or without covering the dura with a cotton pattie. The dural surface and cross-section were observed using electron and light microscopy. When the ultrasonic bone curette was applied directly against the dura, most specimens showed non-perforating dural injuries. However, none of the specimens showed dural perforation. Histological changes were also observed. The use of a cotton pattie reduced the occurrence of these changes, although it did not prevent them when ultrasonic vibration was applied with a large force. We considered ultrasonic bone curettes to have a low risk of dural perforation and, thus, to be a safe surgical device as long as they did not accidentally make strong contact with the dura.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Aslan İğrek, Canan, e Ali Çekici. "Evaluation of Alterations That May Occur on Root Surfaces after Root Planing Procedures with a Scanning Electron Microscope". Applied Sciences 14, n.º 10 (14 de maio de 2024): 4172. http://dx.doi.org/10.3390/app14104172.

Texto completo da fonte
Resumo:
Background: The aim of root debridement procedures in non-surgical periodontal treatment is the elimination of etiologic factors that cause periodontal disease, as well as the removal of cement affected by the disease. However, root debridement procedures for the treatment of periodontal diseases produce root surface irregularities that can adversely affect the healing of periodontal tissues. The objective of the present study is to evaluate the surface texture of a root after instrumentation, including an ultrasonic instrument, a Gracey curette, or a double Gracey curette. Methods: A total of 26 single-rooted teeth were used in this study; two specimens were used as controls, and the remaining 24 specimens were equally divided into three groups. Specimens from each group were then subjected to root planing using one of the following instruments: (1) an ultrasonic instrument; (2) a Gracey curette; or (3) a double Gracey curette. The control group was treated with no instrumentation. The extracted teeth were analyzed under a scanning electron microscope and graded in terms of the “roughness and loss of tooth substance index” and the “exposed dentin tubule index.” The SPSS (Statistical Package for Social Sciences) V.21 program was used to conduct a statistical analysis of the data obtained in this study. While evaluating the data, in addition to descriptive statistical methods (mean and standard deviation), a one-way analysis of variance (one-way ANOVA) was carried out to compare the quantitative data and evaluate normally distributed parameters between groups, while a post hoc multiple comparison test was carried out for subgroup comparisons. Results: There was no statistically significant difference between the roughness and material loss on the root surfaces in the samples treated with the ultrasonic instrument or the Gracey curette, and no exposed dentine tubules were observed. Meanwhile, it was observed that the double Gracey curette caused more roughness and material loss on the root surface, and exposed dentine tubules were observed in some samples. The time required for treatment using a double Gracey curette was significantly shorter than that required with the Gracey curette and ultrasonic instruments. Conclusions: The double Gracey curettes produced a relatively rougher root surface than the Gracey curettes or the ultrasonic instrument.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Bydon, Mohamad, Risheng Xu, Kyriakos Papademetriou, Daniel M. Sciubba, Jean-Paul Wolinsky, Timothy F. Witham, Ziya L. Gokaslan, George Jallo e Ali Bydon. "Safety of spinal decompression using an ultrasonic bone curette compared with a high-speed drill: outcomes in 337 patients". Journal of Neurosurgery: Spine 18, n.º 6 (junho de 2013): 627–33. http://dx.doi.org/10.3171/2013.2.spine12879.

Texto completo da fonte
Resumo:
Object Unintended durotomies are a common complication of spine surgery and are often correlated with increased postoperative morbidity. Recently, ultrasonic bone curettes have been introduced in spine surgery as a possible alternative to the conventional high-speed drill, offering the potential for greater bone-cutting precision and less damage to surrounding soft tissues. To date, however, few studies have investigated the safety and efficacy of the ultrasonic bone curette in reducing the rates of incidental durotomy compared with the high-speed drill. Methods The authors retrospectively reviewed the records of 337 consecutive patients who underwent posterior cervical or thoracic decompression at a single institution between January 2009 and September 2011. Preoperative pathologies, the location and extent of spinal decompression, and the use of an ultrasonic bone curette versus the high-speed drill were noted. The rates of incidental durotomy, as well as hospital length of stay (LOS) and perioperative outcomes, were compared between patients who were treated using the ultrasonic bone curette and those treated using a high-speed drill. Results Among 88 patients who were treated using an ultrasonic bone curette and 249 who were treated using a high-speed drill, 5 (5.7%) and 9 (3.6%) patients had an unintentional durotomy, respectively. This finding was not statistically significant (p = 0.40). No patients in either cohort experienced statistically higher rates of perioperative complications, although patients treated using an ultrasonic bone curette tended to have a longer hospital LOS. This difference may be attributed to the fact that this series contained a statistically higher number of metastatic tumor cases (p < 0.0001) in the ultrasonic bone curette cohort, likely increasing the LOS for that patient population. In 13 patients, the dural defect was repaired intraoperatively. No patients who experienced an incidental durotomy had new-onset or permanent neurological deficits postoperatively. Conclusions The safety and efficacy of ultrasonic bone curettes in spine surgery has not been well established. This study shows that the ultrasonic bone curette has a similar safety profile compared with the high-speed drill, although both are capable of causing iatrogenic dural tears during spine surgery.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Tsurumaki, Jackeline do Nascimento, Bráulio Henrique Marques Souto, Guilherme José Pimentel Lopes de Oliveira, José Eduardo Cézar Sampaio, Elcio Marcantonio Júnior e Rosemary Adriana Chiérici Marcantonio. "Effect of instrumentation using curettes, piezoelectric ultrasonic scaler and Er,Cr:YSGG laser on the morphology and adhesion of blood components on root surfaces: a SEM study". Brazilian Dental Journal 22, n.º 3 (2011): 185–92. http://dx.doi.org/10.1590/s0103-64402011000300002.

Texto completo da fonte
Resumo:
This study used scanning electron microscopy (SEM) to evaluate the morphology and adhesion of blood components on root surfaces instrumented by curettes, piezoelectric ultrasonic scaler and Er,Cr:YSGG laser. One hundred samples from 25 teeth were divided into 5 groups: 1) Curettes; 2) Piezoelectric ultrasonic scaler; 3) Curettes plus piezoelectric ultrasonic scaler; 4) Er,Cr:YSGG laser; 5) Curettes plus Er,Cr:YSGG laser. Ten samples from each group were used for analysis of root morphology and the other 10 were used for analysis of adhesion of blood components on root surface. The results were analyzed statistically by the Kruskall-Wallis and Mann-Whitney tests with a significance level of 5%. The group treated with curettes showed smoother surfaces when compared to the groups were instrumented with piezoelectric ultrasonic scaler and the Er,Cr:YSGG laser. The surfaces instrumented with piezoelectric ultrasonic scaler and Er,Cr:YSGG laser, alone or in combination with hand scaling and root planing, did not differ significantly (p>0.05) among themselves. No statistically significant differences (p>0.05) among groups were found as to the adhesion of blood components on root surface. Ultrasonic instrumentation and Er,Cr:YSGG irradiation produced rougher root surfaces than the use of curettes, but there were no differences among treatments with respect to the adhesion of blood components.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Matheus André Müller, Emanuelle Cunha, Rafaela Scariot, João Cesar Zielak, Felipe Rychuv Santos, Tatiana Miranda Deliberador e Carmen Lucia Mueller Storrer. "Effect of the use of different periodontal curettes on the topography and roughness of root surface". RSBO 13, n.º 1 (25 de março de 2016): 18–24. http://dx.doi.org/10.21726/rsbo.v13i1.677.

Texto completo da fonte
Resumo:
Periodontal scaling is the treatment approach most used to remove dental calculus, plaque, and altered cementum from root surface. During root decontamination, the instruments used leave the root rougher and more irregular. Objective: To verify the root surface after mechanical scaling with different Gracey curettes steel through SEM and superficial roughness analyses. Material and methods: Twelve teeth were embedded in acrylic resin. The teeth were instrumented with new Gracey curettes Gracey 5/6 from different brands. The groups (n=2) were divided into: control, no instrumentation (GC); carbon steel (CSN); stainless steel Neumar (SSN); stainless steel Millenium (SSM); premium steel Neumar (PSN); Hu-Friedy (HF). An area measuring 3 x 3 mm2 was marked on the distal surface of the root to guide the Reading of the root topography on SEM and rugosimeter. The data were analyzed by a single examiner previously calibrated. SEM analysis was based on scores of the root surface smoothness after scaling. We analyzed the parameters of mean roughness (Ra) and mean roughness deepness (Rz). SEM data were submitted to statistical analysis through Fisher’s exact test (p < 0.002) and roughness data by Anova followed by Student t test. Results: The quality of the active surface of the curette demonstrated by SEM and roughness analyses that it can exert difference in the result regarding to the homogeneity produced after the scaling of root surface. Group SSM demonstrated a homogenous root surface (score 0) in SEM and better smoothness in rugosimeter analysis. Conclusion: According to com the methodology used, the group of curettes that provided better smoothness of root surface after scaling was SSM.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

 . "Nieuw ontwikkelde curettes en scalers". TandartsPraktijk 26, n.º 12 (dezembro de 2005): 1029. http://dx.doi.org/10.1007/bf03072730.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Grande, Francesco, Edoardo Mochi Zamperoli, Mario Cesare Pozzan, Fabio Tesini e Santo Catapano. "Qualitative Evaluation of the Effects of Professional Oral Hygiene Instruments on Prosthetic Ceramic Surfaces". Materials 15, n.º 1 (21 de dezembro de 2021): 21. http://dx.doi.org/10.3390/ma15010021.

Texto completo da fonte
Resumo:
During professional hygiene procedures, different instruments used may cause various damage to dental prostheses. Deplaquing and scaling with curettes and ultrasonic instruments may inadvertently increase the surface roughness of the material and the risk of future bacterial adhesion and/or also compromise the marginal seal of the prosthesis. Hence, the aim of this study was to assess the qualitative effects of two types of curettes and one piezoelectric instrument with a stainless-steel tip on three types of metal-free samples. After treating the samples with different instrumentations, they were analyzed using the scanning electron microscope and then underwent a qualitative microanalysis by using a spectroscopy machine. All the materials tested in this study have undergone significant changes of their superficial structure after instrumentation both with mechanical and manual instruments. Plastic curettes appeared to be less aggressive than the other instruments. Disilicate samples show a significantly lower degree of surface glazing erosion compared to the zirconia sample with all the instruments used.
Estilos ABNT, Harvard, Vancouver, APA, etc.

Teses / dissertações sobre o assunto "Curettes"

1

Moysés, Mireille Ferreira Xaia. "Avaliação morfológica de bifurcações radiculares e curetas periodontais". Universidade de Taubaté, 2008. http://www.bdtd.unitau.br/tedesimplificado/tde_busca/arquivo.php?codArquivo=492.

Texto completo da fonte
Resumo:
O presente estudo teve por objetivo avaliar as características anatômicas das bifurcações radiculares, e compará-las às dimensões das pontas ativas das curetas de Gracey e Pádua-Lima. Foram utilizados 198 dentes, distribuídos entre primeiros e segundos molares superiores e inferiores, provenientes do Banco de Dentes da Universidade de Taubaté. Depois de codificados, os dentes foram fotografados por meio de uma câmera acoplada a um aparelho estereoscópio. As imagens foram digitalizadas por meio de um programa de captação de imagens (Pixel View) e avaliadas por meio de um programa de leitura (Image Tool). Nos dentes foram avaliados: a altura dos troncos radiculares, o ângulo de divergência e a distância interradiculares. Nos instrumentais foram avaliados o comprimento, a largura e a espessura das lâminas. Após análise estatística dos dados, os resultados obtidos mostraram que as bifurcações vestibulares de 2MS foram as que menos permitiram o acesso dos instrumentais avaliados, sendo as curetas Gracey acessíveis à maioria das bifurcações. As bifurcações mesiais e distais de molares superiores, por apresentarem maior distância interradicular e ângulos mais divergentes, são as que mais permitem acesso aos instrumentais avaliados. Baseados nestes resultados podemos concluir que as características anatômicas radiculares podem ser um fator de restrição à instrumentação periodontal.
The present study aimed to evaluate the anatomic characteristics of the root bifurcations and compare them with the active tips of the curettes of Gracey and Pádua-Lima. One hundred ninety eight teeth were used, distributed among first and second upper and lower molars, from the Teeth Bank of the University of Taubaté. After received a numerical code, the teeth were photographed by a camera attached to a stereomicroscope. The images were scanned through a capture image program (Pixel View) and evaluated through a software program (Image Tool for Windows 2.0). The length of the root trunk, the divergence angle between the roots and the inter-root dimensions in the bifurcation region were evaluated. In the instruments, characteristics as width, thickness and length of the curettes blade were analyzed. After the statistics analysis, the results obtained showed that the 2MS buccal bifurcations are those least allow access by the instruments evaluated, and the Gracey curettes had access of the majority of the bifurcations. The mesiais and distal bifurcations of upper molars, to have greater inter-root dimensions distance and divergent angles, are those that allow access to more instrumental evaluated. Based in those results, we can conclude that the roots anatomic characteristics can be a factor to restriction the periodontal instrumentation.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Solís, Moreno Carols Denisse. "Análisis de la Microtopografía de la Superficie Radicular después del uso de distintos Sistemas de Instrumentación, mediante Microscopio Confocal (MC) y Microscopio Electrónico de Barrido (SEM). Un estudio In Vitro". Doctoral thesis, Universitat Internacional de Catalunya, 2012. http://hdl.handle.net/10803/83933.

Texto completo da fonte
Resumo:
Estudi in vitro, cec, comparatiu entre curetes Gracey (Hu-Friedy ®), maduixes de terminació diamantades (Perioset Intensiv ®), curetes de terminació diamantades (Intensiv PerioDiaCurette ®), ultrasò piezocerámico (Suprasson P-5 Booster - Satelec ®) i ultrasò piezoelèctric (Piezosurgery Mectron ®), mitjançant microscopi confocal (MC) i microscopi electrònic d'escombrat (SEM). L'objectiu plantejat en aquest estudi in vitro va ser avaluar la microtopografia de la superfície radicular després del raspat i allisat radicular amb sis diferents tipus d'instruments. Així d'aquesta manera aportar noves i importants dades per a la seva subseqüent aplicació a nivell clínic
Estudio in vitro, ciego, comparativo entre curetas Gracey (Hu-Friedy®), fresas de terminación diamantadas (Perioset Intensiv®), curetas de terminación diamantadas (Intensiv PerioDiaCurette®), ultrasonido piezocerámico (Suprasson P-5 Booster - Satelec®) y ultrasonido piezoeléctrico (Piezosurgery Mectron®), mediante microscopio confocal (MC) y microscopio electrónico de barrido (SEM). El objetivo planteado en este estudio in vitro fue evaluar la microtopografía de la superficie radicular después del raspado y alisado radicular con seis distintos tipos de instrumentos. Así de esta manera aportar nuevos e importantes datos para su subsecuente aplicación a nivel clínico.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Nascimento, Luis Marcos de Castro. "Estudo comparativo do efeito da instrumentação com curetas sobre a superficie de abutments de titanio". [s.n.], 2001. http://repositorio.unicamp.br/jspui/handle/REPOSIP/290407.

Texto completo da fonte
Resumo:
Orientador : Antonio Wilson Sallum
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-07-28T05:02:44Z (GMT). No. of bitstreams: 1 Nascimento_LuisMarcosdeCastro_D.pdf: 2039892 bytes, checksum: 7550859f759a3acd4077086abb51b7dc (MD5) Previous issue date: 2001
Resumo: O objetivo deste estudo foi avaliar o efeito da raspagem manual na superfície de conexões de implantes de titânio após o uso das seguintes curetas comercialmente disponíveis: 3i, Hu-Friedy, Premier, Prophy-Implant. As amostras foram nominadas ao acaso de A a G, e cada uma foi subdividida em quatro áreas para tratamento usando um diferente tipo de cureta. As amostras foram analisadas através de Microscopia Eletrônica de Varredura (MEV) e de Rugosímetro. Esta análise foi realizada antes e após os tratamentos propostos que consistiram de instrumentação com curetas repetindo-a 40 vezes em cada área simulando a quantidade de raspagens realizadas sobre um implante após 5 anos de uso (fase1). Um procedimento similar foi usado, nas mesmas áreas, simulando a quantidade de raspagens realizadas sobre um implante após 10 anos de uso. As superfícies das conexões foram reavaliadas. Os dados obtidos pelo rugosímetro foram estatisticamente analisados usando testes de Tukey, Duncan e Scheffe em níveis de probabilidade de 5% e 10%. Os resultados relativos à análise rugosimétrica demonstraram que não houve diferenças significantes entre os grupos (p<0,05). A textura de cada superfície nas fases avaliadas, registrada pelo MEV, corresponderam aos aspectos morfológicos da superfície dos abutments obtidos pela leitura rugosimétrica
Abstract: The aim of this study was to evaluate the effect of hand scaling on the surface of titanium abutments after using the following commercially available instruments: 3i, Hu-Friedy, Premier, Prophy-Implant. The samples were randomly categorized from A to G and each one of them was subdivided in 4 areas for treatment using the different curettes types. The samples were analyzed through scanning electron microscopy (SEM) and the rugosimeter. This analysis was taken before and after the treatments proposed that consisted of repeated instrumentation (40 times each area) to simulate a 5 year old implant (phase 1). After phase 1, a similar procedure was used in the same areas in order to simulate a 1 O-year old implant. The abutment surfaces were reevaluated by SEM and rugosimeter. The data obtained by rugosimeter were statistically analyzed using Tukey, Duncan and Scheffe test at 5 and 10% levels of probability. The results indicated differences (p<0.05) between the control area corresponding to the Hu-Friedy instrumentation area and the Premier group areas after phase 1. After phase 2, the results regarding to the rugosimeter analysis demonstrated that there were no significant differences among the groups (p<0.05). The texture of each surface, registered by SEM, in the evaluated phases corresponded to the data obtained by the rugosimeter
Doutorado
Periodontia
Doutor em Clínica Odontológica
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Andrade, Acevedo Roberto Antonio [UNESP]. "Avaliação do efeito da afiação com diferentes técnicas sobre o ângulo de corte de curetas de Gracey". Universidade Estadual Paulista (UNESP), 2003. http://hdl.handle.net/11449/104764.

Texto completo da fonte
Resumo:
Made available in DSpace on 2014-06-11T19:33:29Z (GMT). No. of bitstreams: 0 Previous issue date: 2003-08-18Bitstream added on 2014-06-13T19:04:27Z : No. of bitstreams: 1 andradeacevedo_ra_dr_arafo.pdf: 2469845 bytes, checksum: 6aef2f449ff6364a09cca9dd4566f240 (MD5)
O presente trabalho teve por objetivo avaliar em fotomicrografias obtidas em microscópio eletrônico de varredura (MEV) o ângulo de corte de curetas de Gracey 5-6 em três níveis: afiação de fábrica, após ficarem sem corte e após serem reafiadas utilizando nove diferentes técnicas padronizadas de afiação: 1- face lateral da cureta contra a pedra Arkansas plana; 2- face coronal e posteriormente a lateral contra a pedra Arkansas plana; 3- pedra de Arkansas plana contra a face lateral da cureta; 4- cone de óxido de alumínio a baixa rotação contra a face coronal e em seguida a face lateral da cureta; 5- face lateral da cureta com pedra Arkansas 299; 6- face lateral da cureta com o aparelho padronizador Hu-Friedy; 7- face coronal da cureta com ponta de videa; 8- face coronal da cureta com ponta de videa e em seguida a face lateral com pedra de Arkansas plana; 9- afiação da face coronal com ponta de videa e em seguida pó abrasivo e roda de feltro rotatória na face lateral da cureta. Foram tomadas fotomicrografias (350X) do ângulo de corte e posteriormente avaliadas por um examinador calibrado através do índice do ângulo de corte. A analise estatística de Kruskal Wallis e comparações múltiplas mostraram que as técnicas 1 e 2 foram as melhores técnicas de afiação seguidas das técnicas 6, 5 e 8. As piores técnicas foram a 7, 9, 4, 0 e 3. A reafiação da face coronal das curetas produziu a formação de projeções metálicas não funcionais no ângulo de corte e finalmente não houve diferenças entre a afiação do extremo par e ímpar dos instrumentos em nenhuma das técnicas de afiação utilizadas.
A micrographs obtained by a scanning electron microscope (SEM) were used to evaluated the gracey 5-6 cutting edges as the come from manufacture, after they had been dull and after they were resharpened by several standard techniques: 1- lateral surface over a flat Arkansas sharp stone; 2- coronal surface and the a lateral surface over a flat Arkansas sharp stone; 3- lateral surface by passing a flat Arkansas sharp stone; 4- rotatory aluminum oxide stone over a coronal surface and then over a lateral face; 5- lateral surface by passing an Arkansas 299 stone; 6- lateral surface on Hu-Friedy sharp divice; 7- coronal surface by a Whittler Neivert Device; 8- coronal face by a Whittler Neivert Device and the a lateral surface over a flat Arkansas sharp stone; 9- coronal surface with a Whittler Neivert Device and a rotating, impregnated, felt wheel on the lateral surface. The cutting edges was blindly evaluated on micrographs (X350) by one calibrated examiner (cutting angle index). A statistical analysis showed that techniques 1 and 2 were the best ones followed by a 6, 5 and 8 techniques. The worst techniques were a 7, 9, 4, 0 and 3. Resharpened on the coronal face of curettes generated a non functional wire edges on the cutting edge angle and there were not differences between the paired and unpaired extreme of the instruments resharpened.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Andrade, Acevedo Roberto Antonio. "Avaliação do efeito da afiação com diferentes técnicas sobre o ângulo de corte de curetas de Gracey /". Araraquara : [s.n.], 2003. http://hdl.handle.net/11449/104764.

Texto completo da fonte
Resumo:
Orientador: José Eduardo Cezar Sampaio
Banca: Silvana Regina Perez Orrico
Banca: Joni Augusto Cirelli
Banca: Enilson Antonio Sallum
Banca: Gibson Luiz Pilatti
Resumo: O presente trabalho teve por objetivo avaliar em fotomicrografias obtidas em microscópio eletrônico de varredura (MEV) o ângulo de corte de curetas de Gracey 5-6 em três níveis: afiação de fábrica, após ficarem sem corte e após serem reafiadas utilizando nove diferentes técnicas padronizadas de afiação: 1- face lateral da cureta contra a pedra Arkansas plana; 2- face coronal e posteriormente a lateral contra a pedra Arkansas plana; 3- pedra de Arkansas plana contra a face lateral da cureta; 4- cone de óxido de alumínio a baixa rotação contra a face coronal e em seguida a face lateral da cureta; 5- face lateral da cureta com pedra Arkansas 299; 6- face lateral da cureta com o aparelho padronizador Hu-Friedy; 7- face coronal da cureta com ponta de videa; 8- face coronal da cureta com ponta de videa e em seguida a face lateral com pedra de Arkansas plana; 9- afiação da face coronal com ponta de videa e em seguida pó abrasivo e roda de feltro rotatória na face lateral da cureta. Foram tomadas fotomicrografias (350X) do ângulo de corte e posteriormente avaliadas por um examinador calibrado através do índice do ângulo de corte. A analise estatística de Kruskal Wallis e comparações múltiplas mostraram que as técnicas 1 e 2 foram as melhores técnicas de afiação seguidas das técnicas 6, 5 e 8. As piores técnicas foram a 7, 9, 4, 0 e 3. A reafiação da face coronal das curetas produziu a formação de projeções metálicas não funcionais no ângulo de corte e finalmente não houve diferenças entre a afiação do extremo par e ímpar dos instrumentos em nenhuma das técnicas de afiação utilizadas.
Abstract: A micrographs obtained by a scanning electron microscope (SEM) were used to evaluated the gracey 5-6 cutting edges as the come from manufacture, after they had been dull and after they were resharpened by several standard techniques: 1- lateral surface over a flat Arkansas sharp stone; 2- coronal surface and the a lateral surface over a flat Arkansas sharp stone; 3- lateral surface by passing a flat Arkansas sharp stone; 4- rotatory aluminum oxide stone over a coronal surface and then over a lateral face; 5- lateral surface by passing an Arkansas 299 stone; 6- lateral surface on Hu-Friedy sharp divice; 7- coronal surface by a Whittler Neivert Device; 8- coronal face by a Whittler Neivert Device and the a lateral surface over a flat Arkansas sharp stone; 9- coronal surface with a Whittler Neivert Device and a rotating, impregnated, felt wheel on the lateral surface. The cutting edges was blindly evaluated on micrographs (X350) by one calibrated examiner (cutting angle index). A statistical analysis showed that techniques 1 and 2 were the best ones followed by a 6, 5 and 8 techniques. The worst techniques were a 7, 9, 4, 0 and 3. Resharpened on the coronal face of curettes generated a non functional wire edges on the cutting edge angle and there were not differences between the paired and unpaired extreme of the instruments resharpened.
Doutor
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

GUIMARAES, FILHO ARLINDO L. "Estudo in vitro da alteracao morfologica em superficie radicular tratada com curetas, aparelho ultrasonico ou laser de Er:YAG". reponame:Repositório Institucional do IPEN, 2004. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11219.

Texto completo da fonte
Resumo:
Made available in DSpace on 2014-10-09T12:49:38Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:02:36Z (GMT). No. of bitstreams: 1 10000.pdf: 3176708 bytes, checksum: 4df01f9ae75cc5b485f84af90fd7fc76 (MD5)
Dissertacao (Mestrado Profissionalizante em Lasers em Odontologia)
IPEN/D-MPLO
Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN-SP; Faculdade de Odontologia, Universidade de Sao Paulo
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Soares, Iara Maria Lohmann. "Efeito imediato de diferentes instrumentos rotatórios e de curetas utilizados na pulpotomia: avaliação histológica em dentes de cães". reponame:Repositório Institucional da UFSC, 2012. http://repositorio.ufsc.br/xmlui/handle/123456789/75207.

Texto completo da fonte
Resumo:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Florianópolis, 1984
Made available in DSpace on 2012-10-15T23:09:22Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-08T15:02:24Z : No. of bitstreams: 1 278005.pdf: 3131515 bytes, checksum: 7bb626ff3fa485d7bf29b548d4b0c139 (MD5)
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Lenzi, Richard. "Laboratory and clinical evaluation of curette wear after root planing procedures a thesis submitted in partial fulfillment ... periodontics ... /". 1988. http://books.google.com/books?id=2XU9AAAAMAAJ.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

"Estudo comparativo do efeito da instrumentação com curetas sobre a superficie de abutments de titanio". Tese, Biblioteca Digital da Unicamp, 2001. http://libdigi.unicamp.br/document/?code=vtls000220521.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ahdab, Hazem Mohammed Nasser al [Verfasser]. "Comparison of curette and paper point sampling of subgingival plaque bacteria as analyzed by reat-time PCR / Hazem Mohammed Nasser Al Ahdab". 2006. http://d-nb.info/980940508/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Livros sobre o assunto "Curettes"

1

Ferrer, Jacinto Peraire. El Cinca baja teñido de sangre: Los curetas de Monzón y los Gasco de Sena, camino de la glorificación martirial cristiana. Madrid: Biblioteca de Autores Cristianos, 2003.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Curetting the uterus, and the method of treating the cavity afterwards. [S.l: s.n., 1985.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Andrew, Clayton. High Triglyceride Diet Cookbook: The Complete Guide to Lowering Your Triglycerides with Curetted Recipes and Meal Plan and How to Get Started. Independently Published, 2022.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Capítulos de livros sobre o assunto "Curettes"

1

Keintzel, Maike, e Thomas Kohnen. "Aspiration Curette". In Encyclopedia of Ophthalmology, 1–2. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-35951-4_455-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Keintzel, Maike, e Thomas Kohnen. "Aspiration Curette". In Encyclopedia of Ophthalmology, 193–94. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-540-69000-9_455.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Matsumoto, Yu. "Bone Curette Handle for Improved Bone Removal in Endoscopic Ear Surgery". In Innovations in Endoscopic Ear Surgery, 85–87. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7932-1_10.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Dhaduk, Rushik. "Scalers and Curettes". In Essentials of Dentistry: Quick Review and Examination Preparation, 134. Jaypee Brothers Medical Publishers (P) Ltd., 2012. http://dx.doi.org/10.5005/jp/books/11480_20.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

"Dissectors, Elevators, Curettes". In The Neurosurgical Instrument Guide, editado por Christopher S. Eddleman. Stuttgart: Georg Thieme Verlag, 2012. http://dx.doi.org/10.1055/b-0034-74374.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

"Drills, Bits, Rongeurs, Curettes". In The Neurosurgical Instrument Guide, editado por Christopher S. Eddleman. Stuttgart: Georg Thieme Verlag, 2012. http://dx.doi.org/10.1055/b-0034-74362.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

"curette, n." In Oxford English Dictionary. 3a ed. Oxford University Press, 2023. http://dx.doi.org/10.1093/oed/7062544185.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Aloff, Mindy. "Coaches and Teachers". In Dance Anecdotes, 76–92. Oxford University PressNew York, NY, 2006. http://dx.doi.org/10.1093/oso/9780195054118.003.0005.

Texto completo da fonte
Resumo:
Abstract What Goes Around, Comes Around The story most frequently told by the Greeks about the beginning of dancing upon the earth—a story which became a part of Greek mythology—went as follows: In the early days of the world, before the race of man peopled the land, the Titan Rhea, wife of Cronus, taught the art of the dance to the Curetes, sons of Earth, who dwelt in the island of Crete, and to the Corybantes, who lived in Phrygia, in Asia Minor. This act stood Rhea in good stead later. Cronus, so the legend goes, habitually devoured his children at birth. Rhea fled to Crete and there her youngest son, the god Zeus, was born. Rhea hid Zeus in a cave and gave Cronus, instead of the child, a stone wrapped in swaddling clothes. Cronus swallowed the stone, and Rhea placed the baby in the care of the Curetes. They, to prevent Cronus from hearing the cries of Zeus, danced over him a wild, noisy, leaping dance, in which they shouted lustily and beat their swords against their shields. Legend says that they later became priests of Zeus and that they and their descendants continued their dances for centuries, as cult rituals.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Younger, Joshua D., e Monica Prasad. "Spontaneous Abortion". In Advanced Anesthesia Review, editado por Alaa Abd-Elsayed, 760—C299.S4. Oxford University PressNew York, 2023. http://dx.doi.org/10.1093/med/9780197584521.003.0298.

Texto completo da fonte
Resumo:
Abstract Abortion can occur both spontaneously and electively. An abortion can be performed either medically or surgically. Medical abortions are usually managed with medications such as methotrexate, mifepristone, and misoprostol. Surgical abortions are performed with a manual vacuum aspirator (MVA), metal curette, a suction device, or any combination of these. Of note, 5% of all pregnancy-related maternal deaths are associated with either an elective or a spontaneous abortion. These maternal deaths are usually linked to sepsis and/or hemorrhage. The anesthetic considerations are dependent on the active issues that present when the patient enters the operating suite. The most concerning of them is the rapid management of hemorrhage and infection.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

"2.9.13 The transformation of the Curetes into lions, Cyn. 3.8-19". In Stories from the Mountains, Stories from the Sea, 125–29. Göttingen: Vandenhoeck & Ruprecht, 2003. http://dx.doi.org/10.13109/9783666252495.125.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Curettes"

1

Mello, Fabiano A. S., Andrea M. D. Mello, Edmir Matson, Adriana B. Mattos e Guilherme P. S. Mello. "Root planing with Er:YAG laser X Gracey curette: a study in vitro using scanning electron microscopy". In BiOS 2001 The International Symposium on Biomedical Optics, editado por Peter Rechmann, Daniel Fried e Thomas Hennig. SPIE, 2001. http://dx.doi.org/10.1117/12.424513.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Mizumori, Yasuyuki, Yasuharu Nakahara, Katsuya Hirano, Ryota Kominami, Yasushi Fukuda, Yasutaka Onishi, Tomohiro Kato et al. "Towards quick and easy bronchial occlusion with silicon spigots: A new technique using guide sheath and curette". In ERS International Congress 2016 abstracts. European Respiratory Society, 2016. http://dx.doi.org/10.1183/13993003.congress-2016.pa757.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Gao, Anzhu, John P. Carey, Ryan J. Murphy, Iulian Iordachita, Russell H. Taylor e Mehran Armand. "Progress toward robotic surgery of the lateral skull base: Integration of a dexterous continuum manipulator and flexible ring curette". In 2016 IEEE International Conference on Robotics and Automation (ICRA). IEEE, 2016. http://dx.doi.org/10.1109/icra.2016.7487642.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia