Conecte-se

Bibliografias temáticas / Coupled system

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Coupled system"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 31 de agosto de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Coupled system".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Coupled system"

1

Peng, Wei, Yunfei Zhang, Yi Wang, Li Chen e Kewei Liu. "A Global Coupled Atmosphere-Wave Model System Based on C-Coupler2. Part I: Model Description". Journal of Physics: Conference Series 2718, n.º 1 (1 de março de 2024): 012025. http://dx.doi.org/10.1088/1742-6596/2718/1/012025.

Texto completo da fonte

Resumo:

Abstract This study presents a global coupled atmosphere-wave model system (MPAS-NWW3) and its verification. The Community Coupler2 (C-Coupler2), a developed coupler, is used to couple the global wave configuration of the NWW3 (WAVEWATHCH III) with the global atmosphere configuration of the MPAS-Atmosphere model. Surface wind at 10 meters above sea level, temperature and specific humidity at 2 meters above sea level are the coupled variables for atmospheric component model, and significant wave height, average wave length and peak frequency are for wave component model. Some codes are added to the surface layer scheme and the effect of momentum flux induced by sea waves is taken into consideration in this paper. All the coupled variables, input or output the coupler are demonstrated their consistency in the MPAS-NWW3 coupled model.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Liu, L., G. Yang, B. Wang, C. Zhang, R. Li, Z. Zhang, Y. Ji e L. Wang. "C-Coupler1: a Chinese community coupler for Earth system modeling". Geoscientific Model Development 7, n.º 5 (9 de outubro de 2014): 2281–302. http://dx.doi.org/10.5194/gmd-7-2281-2014.

Texto completo da fonte

Resumo:

Abstract. A coupler is a fundamental software tool for Earth system modeling. Targeting the requirements of 3-D coupling, high-level sharing, common model software platform and better parallel performance, we started to design and develop a community coupler (C-Coupler) from 2010 in China, and finished the first version (C-Coupler1) recently. C-Coupler1 is a parallel 3-D coupler that achieves the same (bitwise-identical) results with any number of processes. Guided by the general design of C-Coupler, C-Coupler1 enables various component models and various coupled models to be integrated on the same common model software platform to achieve a higher-level sharing, where the component models and the coupler can keep the same code version in various model configurations for simulation. Moreover, it provides the C-Coupler platform, a uniform runtime environment for operating various kinds of model simulations in the same manner. C-Coupler1 is ready for Earth system modeling, and it is publicly available. In China, there are more and more modeling groups using C-Coupler1 for the development and application of models.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Liu, L., G. Yang, B. Wang, C. Zhang, R. Li, Z. Zhang, Y. Ji e L. Wang. "C-Coupler1: a Chinese community coupler for Earth System Modelling". Geoscientific Model Development Discussions 7, n.º 3 (11 de junho de 2014): 3889–936. http://dx.doi.org/10.5194/gmdd-7-3889-2014.

Texto completo da fonte

Resumo:

Abstract. Coupler is a fundamental software tool for Earth System Modelling. Targeting the requirements of 3-D coupling, high-level sharing, common model software platform and better parallel performance, we started to design and develop a community coupler (C-Coupler) from 2010 in China, and finished the first version (C-Coupler1) recently. The C-Coupler1 is a parallel 3-D coupler that achieves the same (bit-identical) result with any number of processes. Guided by the general design of the C-Coupler, the C-Coupler1 enables various component models and various coupled model versions to be integrated on the same common model software platform to achieve a~higher-level sharing, where the component models and the coupler can keep the same code version in various model versions for simulation. Moreover, it provides the C-Coupler platform, a uniform runtime environment for operating various kinds of model simulations in the same manner. Now the C-Coupler1 is ready for Earth System Modelling, and it is publicly available. In China, there are more and more model groups using the C-Coupler1 for the development and application of models.

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Adomian, G., e R. Rach. "A coupled nonlinear system". Journal of Mathematical Analysis and Applications 113, n.º 2 (fevereiro de 1986): 510–13. http://dx.doi.org/10.1016/0022-247x(86)90322-7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Hoffman, Ross N., e Robert Atlas. "Future Observing System Simulation Experiments". Bulletin of the American Meteorological Society 97, n.º 9 (1 de setembro de 2016): 1601–16. http://dx.doi.org/10.1175/bams-d-15-00200.1.

Texto completo da fonte

Resumo:

Abstract As operational forecast and data assimilation (DA) systems evolve, observing system simulation experiment (OSSE) systems must evolve in parallel. Expected development of operational systems—especially the use of data that are currently not used or are just beginning to be used, such as all-sky and surface-affected microwave radiances—will greatly challenge our ability to construct realistic OSSE systems. An additional set of challenges will arise when future DA systems strongly couple the different Earth system components. In response, future OSSE systems will require coupled models to simulate nature and coupled observation simulators. The requirements for future evolving OSSE systems and potential solutions to satisfy these requirements are discussed. It is anticipated that in the future the OSSE technique will be applied to diverse and coupled domains with the use of increasingly advanced and sophisticated simulations of nature and observations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Wysochin, Viktor, e Аnna Golovatyuk. "Structural factors of solar system cluster ground coupled storage rationalization". Odes’kyi Politechnichnyi Universytet. Pratsi, n.º 3 (23 de dezembro de 2015): 26–30. http://dx.doi.org/10.15276/opu.3.47.2015.08.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

He, Zelong, Jiyuan Bai e Cheng Ma. "Conductance through a parallel-coupled double quantum dot with a side-coupled quantum dot system". Modern Physics Letters B 31, n.º 09 (30 de março de 2017): 1750095. http://dx.doi.org/10.1142/s0217984917500956.

Texto completo da fonte

Resumo:

Using the non-equilibrium Green’s function technique, conductance through a parallel-coupled double quantum dot (PCDQD) with a side-coupled quantum dot system is investigated. The evolution of the conductance strongly depends on the coupling between the side-coupled quantum dot and PCDQD. Moreover, the conductance as a function of the level of side-couple quantum dot is investigated. Numerical results indicate the lineshape of Fano resonance can be modulated by adjusting the interdot coupling strength.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Vavilala, Sateesh Kumar, e Vinopraba T. "Fractional State Feedback Controller for a Non-Interacting Coupled Tank System". Journal of Advanced Research in Dynamical and Control Systems 11, n.º 0009-SPECIAL ISSUE (25 de setembro de 2019): 257–65. http://dx.doi.org/10.5373/jardcs/v11/20192565.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Peng, Wei, Xiang Li, Sai Hao e Xiaoyan Liu. "A Global Coupled Atmosphere-Wave Model System Based on C-Coupler2. Part II: Preliminary Results". Journal of Physics: Conference Series 2718, n.º 1 (1 de março de 2024): 012026. http://dx.doi.org/10.1088/1742-6596/2718/1/012026.

Texto completo da fonte

Resumo:

Abstract A global coupled atmosphere-wave model system (MPAS-NWW3) that consists of MPAS-A (Model for Prediction Across Scales-Atmosphere) and NWW3 (the Third Generation Wave Model, WAVEWATHCH III) with C-Coupler2 (the Community Coupler2) is demonstrated with a focus on the atmospheric results in global and the specific marine area in the year 2020. Results from the two-way coupled MPAS-NWW3 model and standalone MPAS-A are compared with reanalysis products. The coupled model performs better in terms of high wind speeds and long valid hours. This indicates that the coupled model has an obvious inhibitory effect on surface wind in areas with strong winds.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Amster, P., e M. C. Mariani. "A system of coupled pendulii". Nonlinear Analysis: Theory, Methods & Applications 64, n.º 8 (abril de 2006): 1647–53. http://dx.doi.org/10.1016/j.na.2005.07.009.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Coupled system"

1

Yu, Tzu-Yang (Tzu-Yang Young) 1973. "Behavior of a coupled arch system". Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84825.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Leung, Wing K. (Wing Keung). "Development of a computer-coupled fermentation system". Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=59598.

Texto completo da fonte

Resumo:

A computer-coupled fermentation system has been developed for advanced research in fermentation technology.
Application software programs were developed as concurrent task programs to perform data acquisition, process monitoring and feed stream manipulation.
Another software program was also developed to support the application programs in a concurrent programming environment. This program supports generalized menu-driven operator interface and is application independent. The menu is reconfigurable by utility programs. Its well-defined parameter passing and input/output protocols enable the application software modules to be reused in different applications in a convenient way.
A chemical solutions delivery system was also developed to some extent to allow fermentations to be studied in well controlled, unconventional modes of operation based on fed-batch or continuous-flow culture systems.
Performance of the system components and new software were tested in operation simulations and one batch and three fed batch fermentations employing the acetone-butanol-ethanol process with Clostridium acetobutylicum.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Heun, Oliver. "Spin-restricted Coupled-Cluster-Theorie für offenschalige Zustände". [S.l. : s.n.], 2002. http://ArchiMeD.uni-mainz.de/pub/2002/0166/diss.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

O'Brien, Kathleen. "Inductively coupled radio frequency power transmission system for wireless systems and devices /". Aachen : Shaker, 2007. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=015959229&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Bacardit, Peñarroya Jordi. "Coupled photochemical-biological system to treat biorecalcitrant wastewaters". Doctoral thesis, Universitat de Barcelona, 2007. http://hdl.handle.net/10803/1533.

Texto completo da fonte

Resumo:

Advanced Oxidation Processes (AOPs) are suitable for achieving the complete mineralization of organic pollutants in wastewaters, since they are based on the generation of a powerful non-selective chemical oxidant. A major drawback of AOPs is that they involve high operating costs if high levels of mineralization are endeavoured. Integration of an AOP with a biological treatment has demonstrated to be a suitable alternative, since it combines the capacity of the AOP, in this case Photo-Fenton, to enhance biodegradability, with a biological treatment such as a Sequencing Batch Biofilter Reactor (SBBR), which operating costs are lower.

Photo-Fenton (Ph-F) process is carried out by irradiating the system with ultraviolet (UV) and/or visible (Vis) light. In Fenton processes, by combination of hydrogen peroxide (H2O2) as a reagent and iron ions (Fe2+ for example) as catalyst in acid medium, highly oxidant species are generated.

According to the results, most of the studied parameters may be written as a function of [H2O2]0, which means that temperature and [Fe2+]0 do not affect significantly the results. Moreover, a subsequent scale-up of the process shows that degradation follow very similar tendencies and shows similar results.

It has been observed that the efficiency of oxidation follows a tendency directly related to the amount of H2O2 applied. An innovative description of the process is their modelling regarding the evolution of COD and BOD5 over the oxidation process or depending on the amount of H2O2 applied. The models show good fitting properties, and they appear to be a good basis for more precise modelling of the system.

Regarding the integration of both processes, the best operating conditions consists of first treating the solution by Ph-F with 500 mg.L-1 of [H2O2]0 and 10 mg.L-1 of [Fe2+]0 at 27 ºC. The resulting product is then treated in the SBBR for 8 hours of time. More than 90 % of mineralization is achieved. The bioreactor show high resistance when is exposed to toxic shock load. Concerning control possibilities, monitoring the Oxygen Uptake Rate (OUR) by in-situ respirometry is suggested to be a good parameter, since it is a direct measurement of bacterial activity.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Girija, Sasidharan Pillai Harish. "Analysis of coupled body mooring and fender system". Texas A&M University, 2005. http://hdl.handle.net/1969.1/2608.

Texto completo da fonte

Resumo:

The hydrodynamic excitation and response behavior of multi-body systems with varying degrees of coupling presents many challenges for designers of offshore structures. In this study, attention is focused upon the analysis and interpretation of experimental data obtained for an unmanned deepwater mini-Tension Leg Platform (mini-TLP) coupled to a tender barge. Each body has its own mooring system and the bodies are connected by two breast lines extending from central points on the mini-TLP to central points on the bow and stern of the tender barge. A fender system is located between the two platforms. Thus the two floating bodies are constrained to move together in surge and yaw while they are free to move independently in heave, roll and pitch with some limitations on sway. The data of the individual records are characterized using statistical moments, including skewness and kurtosis, to examine the degree of non-Gaussian behavior. Correlation analysis and cross spectral analysis are used to investigate the relationships between selected measurements such as the motion of each vessel, tensions in the mooring lines and tendons and the forces on the fenders. The analysis shows that the coupling effects reduce the mooring line and tendon tensions significantly and that the motions of the two vessels influence the line tensions and fender forces. The data distribution patterns followed by the parameters and the corresponding extreme values are also investigated.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Gentine, Pierre. "Spectral behavior of the coupled land-atmosphere system". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/61243.

Texto completo da fonte

Resumo:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Civil and Environmental Engineering, February 2010.
Cataloged from PDF version of thesis.
Includes bibliographical references.
The main objective of this thesis is to understand the daily cycle of the energy coupling between the land and the atmosphere in response to a forcing of incoming radiation at their common boundary, the land surface. This is of fundamental importance as that the initial/ boundary conditions of the land-surface state variables (e.g. soil moisture, soil temperature) exert strong control at various temporal scales on hydrologic, climatic and weather related processes. Hence diagnosing these state variables is crucial for extreme hydrological forecasting (flood/ drought), agronomic crop management as well as weather and climatic forecasts. Consequently in this thesis, the daily behavior of a simple land-atmosphere model is examined. A conceptual and linearized land-atmosphere model is first introduced and its response to a daily input of incoming radiation at the land surface is investigated. The solution of the different state and fluxes in the Atmospheric Boundary Layer (ABL) and in the soil are expressed as temporal Fourier series with vertically dependent coefficients. These coefficients highlight the impact of both the surface parameters and the frequency of the radiation on the heat propagation in the ABL and in the soil. The simplified model is shown to compare well with field measurements thus accounting for the main emergent behaviors of the system. The first chapter of the thesis describes the theoretical background of the equations governing the evolution of temperature and humidity in the ABL and in the soil. In the second chapter, the pioneering work of Lettau (1951), which inspired our approach is summarized. In his work Lettau studied the response of a simplified linearized land-atmosphere model to a sinusoidal net radiation forcing at the land surface. The third chapter of the thesis describes the SUDMED project, which took place in Morocco in 2003. During this project a wheat field was fully instrumented with continuous measurements of soil moisture, radiative fluxes, turbulent heat fluxes and soil heat flux. This site will be taken as a reference for model comparison. The fourth chapter of the thesis presents the three studies with distinctive goals. In these studies our linearized land-atmosphere model is first introduced. Then the propagation of the land-surface diurnal heating is presented and the model is compared to observations from the SUDMED project. Finally the repercussion of a land-surface energy budget error noise is investigated. Finally in the last chapter of the thesis we discuss possible evolution and improvements of the analytical coupled model presented in this thesis. In particular, it is emphasized that the non-linearity of the the boundary-layer height is of great importance for the predictability of the ABL state.
by Pierre Gentine.
Ph.D.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Alghamdi, Jamal Khaled. "CFD Simulation Methodology for Ground-Coupled Ventilation System". Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/35736.

Texto completo da fonte

Resumo:

In the past two decades, a growing interest in alternative energy resources as a replacement to the non-renewable resources used now days. These alternatives include geothermal energy which can be used to generate power and reduce the demands on energy used to heat and cool buildings. Ground-coupled ventilation system is one of the many applications of the geothermal energy that have a lot of attention in the early 80â s and 90â s but all designs of the system where based on single case situations. On the other hand, computational fluid dynamics tools are used to simulate heat and fluid flow in any real life situation. They start to develop rapidly with the fast development of computers and processors. These tools provide a great opportunity to simulate and predict the outcome of most problems with minimum loss and better way to develop new designs. By using these CFD tools in GCV systems designing procedure, energy can be conserved and designs going to be improved. The main objective of this study is to find and develop a CFD modeling strategy for GCV systems. To accomplish this objective, a case study must be selected, a proper CFD tool chosen, modeling and meshing method determined, and finally running simulations and analyzing results. All factors that affect the performance of GCV should be taken under consideration in that process such as soil, backfill, and pipes thermal properties. Multiple methods of simulation were proposed and compared to determine the best modeling approach.
Master of Science

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Alfadil, Mohammad Omar. "Design Tool for a Ground-Coupled Ventilation System". Diss., Virginia Tech, 2019. http://hdl.handle.net/10919/100604.

Texto completo da fonte

Resumo:

Ground-coupled ventilation (GCV) is a system that exchanges heat with the soil. Because ground temperatures are relatively higher during the cold season and lower during the hot season, the system takes advantage of this natural phenomenon. This research focused on designing a ground-coupled ventilation system evaluation tool of many factors that affect system performance. The tool predicts the performance of GCV system design based on the GCV system design parameters including the location of the system, pipe length, pipe depth, pipe diameter, soil type, number of pipes, volume flow rate, and bypass system. The tool uses regression equations created from many GCV system design simulation data using Autodesk Computational Fluid Dynamics software. As a result, this tool helps users choose the most suitable GCV system design by comparing multiple GCV systems' design performances and allows them to save time, money, and effort.
Doctor of Philosophy

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Toffin, Eric. "Active control of a coupled plate-cylinder system". Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-06162009-063337/.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Coupled system"

1

Kaliske, Michael, Markus Oeser, Lutz Eckstein, Sabine Leischner, Wolfram Ressel e Frohmut Wellner, eds. Coupled System Pavement - Tire - Vehicle. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75486-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Yang, Shaopu, Liqun Chen e Shaohua Li. Dynamics of Vehicle-Road Coupled System. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-45957-7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Karama, Moussa. Coupled problems and multi-physics. Durnten-Zurich: Trans Tech Publications, 2011.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

United States. National Aeronautics and Space Administration., ed. Coupled growth in hypermonotectics. [Washington, DC]: Advanced Gradient Heating Facility, 1998.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Andrews, J. Barry. Coupled growth in hypermonotectics. [Washington, DC]: Advanced Gradient Heating Facility, 1998.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

1952-, Kunisch K. (Karl), e SpringerLink (Online service), eds. Optimal control of coupled systems of partial differential equations. Basel, Switzerland: Birkhäuser Verlag, 2009.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Zoran, Gajić, ed. Optimal control: Weakly coupled systems and applications. Boca Raton: Taylor & Francis, 2008.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Park, Chang Joon. Feasibility study of an electrothermal vaporizer/inductively coupled plasma/mass spectrometry system. [Downsview, Ont.]: [Institute for Aerospace Studies], 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Yu, A. H. Study of coupled oscillator arrays for the radio-on-fibre communication system. Birmingham: University of Birmingham, 1999.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Chu, Felix T. The lateral relationship between librarians and faculty in a loosely coupled system. Ann Arbor, Mich: University Microfilms International, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Coupled system"

1

McCann, John M., e John P. Gallagher. "The Coupled System". In International Series in Quantitative Marketing, 115–31. Dordrecht: Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-3923-6_7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Bronstein, Manuel. "The Coupled Differential System". In Symbolic Integration I, 253–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-662-03386-9_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Zhai, Wanming. "Excitation Models of Vehicle–Track Coupled System". In Vehicle–Track Coupled Dynamics, 151–202. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9283-3_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Zhai, Wanming. "Vibration Characteristics of Vehicle–Track Coupled System". In Vehicle–Track Coupled Dynamics, 299–346. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9283-3_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Zhai, Wanming. "Field Test on Vehicle–Track Coupled System Dynamics". In Vehicle–Track Coupled Dynamics, 231–58. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9283-3_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Palm, Harry W., Ulrich Knaus, Samuel Appelbaum, Sebastian M. Strauch e Benz Kotzen. "Coupled Aquaponics Systems". In Aquaponics Food Production Systems, 163–99. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-15943-6_7.

Texto completo da fonte

Resumo:

AbstractCoupled aquaponics is the archetype form of aquaponics. The technical complexity increases with the scale of production and required water treatment, e.g. filtration, UV light for microbial control, automatic controlled feeding, computerization and biosecurity. Upscaling is realized through multiunit systems that allow staggered fish production, parallel cultivation of different plants and application of several hydroponic subsystems. The main task of coupled aquaponics is the purification of aquaculture process water through integration of plants which add economic benefits when selecting suitable species like herbs, medicinal plants or ornamentals. Thus, coupled aquaponics with closed water recirculation systems has a particular role to fulfil.Under fully closed recirculation of nutrient enriched water, the symbiotic community of fish, plants and bacteria can result in higher yields compared with stand-alone fish production and/or plant cultivation. Fish and plant choices are highly diverse and only limited by water quality parameters, strongly influenced by fish feed, the plant cultivation area and component ratios that are often not ideal. Carps, tilapia and catfish are most commonly used, though more sensitive fish species and crayfish have been applied. Polyponics and additional fertilizers are methods to improve plant quality in the case of growth deficiencies, boosting plant production and increasing total yield.The main advantages of coupled aquaponics are in the most efficient use of resources such as feed for nutrient input, phosphorous, water and energy as well as in an increase of fish welfare. The multivariate system design approach allows coupled aquaponics to be installed in all geographic regions, from the high latitudes to arid and desert regions, with specific adaptation to the local environmental conditions. This chapter provides an overview of the historical development, general system design, upscaling, saline and brackish water systems, fish and plant choices as well as management issues of coupled aquaponics especially in Europe.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Mohanty, Udayan. "Polarization of Counterions in a Strongly Coupled Coulombic System: DNA". In Strongly Coupled Coulomb Systems, 405–8. Boston, MA: Springer US, 2002. http://dx.doi.org/10.1007/0-306-47086-1_72.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Wollny, Ines, Felix Hartung, Michael Kaliske, Pengfei Liu, Markus Oeser, Dawei Wang, Gustavo Canon Falla, Sabine Leischner e Frohmut Wellner. "Multi-scale Computational Approaches for Asphalt Pavements Under Rolling Tire Load". In Coupled System Pavement - Tire - Vehicle, 247–66. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75486-0_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Liu, Pengfei, Tim Teutsch, Jing Hu, Stefan Alber, Dawei Wang, Gustavo Canon Falla, Markus Oeser e Wolfram Ressel. "Characterization and Evaluation of Different Asphalt Properties Using Microstructural Analysis". In Coupled System Pavement - Tire - Vehicle, 207–25. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75486-0_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Behnke, Ronny, Michael Kaliske, Barbara Schuck, Stefan Alber, Wolfram Ressel, Frohmut Wellner, Sabine Leischner, Gustavo Canon Falla e Lutz Eckstein. "Simulation Chain: From the Material Behavior to the Thermo-Mechanical Long-Term Response of Asphalt Pavements and the Alteration of Functional Properties (Surface Drainage)". In Coupled System Pavement - Tire - Vehicle, 267–89. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75486-0_9.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Coupled system"

1

Shilin, Victor A., e A. A. Pugachev. "CCD simulation system". In Fifth Conference on Charge-Coupled Devices and CCD Systems, editado por Vladimir A. Karasev, Yuri A. Kuznetsov e Victor A. Shilin. SPIE, 1996. http://dx.doi.org/10.1117/12.238201.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Thomas, Robert M. "Visually Coupled System Integration". In SPIE 1989 Technical Symposium on Aerospace Sensing, editado por Jerry Carollo. SPIE, 1989. http://dx.doi.org/10.1117/12.960895.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Ryvkind, V. L., E. I. Bochkaryova, Leonid Y. Lazovsky e A. A. Korolyov. "Single-DSP-architecture low-cost digital CCD system". In Fifth Conference on Charge-Coupled Devices and CCD Systems, editado por Vladimir A. Karasev, Yuri A. Kuznetsov e Victor A. Shilin. SPIE, 1996. http://dx.doi.org/10.1117/12.238209.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Siniakova, Olga G., e Airat I. Ishmuhametov. "Medical diagnostic system based on image receivers of various spectral ranges". In Fifth Conference on Charge-Coupled Devices and CCD Systems, editado por Vladimir A. Karasev, Yuri A. Kuznetsov e Victor A. Shilin. SPIE, 1996. http://dx.doi.org/10.1117/12.238210.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Ohno, Y., R. Inoue e M. Tonouchi. "Fiber-coupled Compact Terahertz System". In 2005 International Topical Meeting on Microwave Photonics. IEEE, 2005. http://dx.doi.org/10.1109/mwp.2005.203597.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Guo HongZhan e Jin Long. "Performances analysis of a compact slot-coupled UWB directional coupler". In 2013 International Workshop on Microwave and Millimeter Wave Circuits and System Technology (MMWCST). IEEE, 2013. http://dx.doi.org/10.1109/mmwcst.2013.6814630.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Jiang, Yirong, e Srinivas Garimella. "Compact Air-Coupled and Hydronically Coupled Microchannel Heat Pumps". In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/aes-23628.

Texto completo da fonte

Resumo:

Abstract Novel air-coupled and hydronically coupled heat pumps using microchannel components were investigated in this study. The air-coupled system uses microchannel tube, multilouver fin heat exchangers as the evaporator and condenser. In the hydronically coupled heat pump, refrigerant in the evaporator as well as the condenser transfers heat to an intermediate fluid such as an ethyleneglycol solution. The glycol loops are connected to the indoor/outdoor air through liquid-air heat exchangers. Models to simulate cycle thermodynamics, and single- and two-phase heat transfer in the components were developed to design these systems for cooling and heating mode operation. The components were optimized to develop the most compact systems that would satisfy system performance requirements. These systems were also compared with a conventional round-tube, plate-fin heat pump, which was designed using a commercially available simulation tool. Results from this study show that indoor and outdoor units of air-coupled microchannel systems can be packaged in only one-half and one-third the space required for a conventional system. Even more compact refrigerant heat exchangers are required in the hydronically coupled system, because of the high heat transfer coefficients for these liquid-coupled heat exchangers, and the counterflow orientation. The hydronic coupling offers flexibility in system location, and is well suited for integrated space-conditioning and water heating systems. Both air-coupled and hydronically coupled systems result in significant reductions in refrigerant inventories compared to round-tube systems. The refrigerant charge of the microchannel air-coupled system is 20% less than that of the round-tube heat pump. For the hydronically coupled system, the refrigerant charge is only 10% of the charge in the round-tube heat pump.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Boulanger, Albert, e Julio Escobar. "Loosely coupled environmental models". In The earth and space science information system (ESSIS). AIP, 1993. http://dx.doi.org/10.1063/1.44399.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Koyanagi, Mitsumasa. "Optically coupled three-dimensional memory system". In Boston - DL tentative, editado por Stuart K. Tewksbury e John R. Carruthers. SPIE, 1991. http://dx.doi.org/10.1117/12.25601.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Sulakshin, Alexander S., Nikolai M. Filipenko, Gennadii P. Fomenko, Gennadii G. Kanaev, Sergei S. Novikov e Stepan A. Sulakshin. "System of strongly coupled relativistic magnetrons". In Optical Science, Engineering and Instrumentation '97, editado por Howard E. Brandt. SPIE, 1997. http://dx.doi.org/10.1117/12.279436.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Coupled system"

1

Wofford, John Quince III. Coupled Application+System Performance Profiling. Office of Scientific and Technical Information (OSTI), agosto de 2019. http://dx.doi.org/10.2172/1558026.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Mishra, Umesh K. Inductively Coupled Plasma System (ICP). Fort Belvoir, VA: Defense Technical Information Center, janeiro de 2001. http://dx.doi.org/10.21236/ada420671.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Richman, James G., e Timothy R. Whitcomb. ESPC Coupled Global Prediction System. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2014. http://dx.doi.org/10.21236/ada616448.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Hodur, Richard M. Global Coupled Data Assimilation System Development. Fort Belvoir, VA: Defense Technical Information Center, setembro de 1999. http://dx.doi.org/10.21236/ada630735.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Kocian, Dean F. Visually Coupled Systems (VCS): The Virtual Panoramic Display (VPD) System. Fort Belvoir, VA: Defense Technical Information Center, janeiro de 1991. http://dx.doi.org/10.21236/ada434161.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Posey, Pamela, e Shouping Wang. ESPC Coupled Global Prediction System - Develop and Test Coupled Physical Parameterizations: NAVGEM/CICE/HYCOM. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2013. http://dx.doi.org/10.21236/ada601272.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Luces, Saba A., e Ronald M. Cionco. Prototype of a Coupled Mesoscale-Microscale Modeling System. Fort Belvoir, VA: Defense Technical Information Center, janeiro de 2006. http://dx.doi.org/10.21236/ada443534.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Torres, Al. Fiber Optically Coupled Eyesafe Laser Threat Warning System. Fort Belvoir, VA: Defense Technical Information Center, maio de 2000. http://dx.doi.org/10.21236/ada395281.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

Garner, James M., Bernard J. Guidos, Robert A. Phillabaum, Peter C. Muller e Eric Scheper. A Soft Recovery System Coupled With Advanced Diagnostics. Fort Belvoir, VA: Defense Technical Information Center, outubro de 2006. http://dx.doi.org/10.21236/ada456551.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Lewis, James K., e Peter J. Stein. The Coupled Oceanographic-Tomographic Analysis and Prediction System. Fort Belvoir, VA: Defense Technical Information Center, setembro de 2008. http://dx.doi.org/10.21236/ada533104.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!