Literatura científica selecionada sobre o tema "Composites à fibres de carbone – Environnement"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Composites à fibres de carbone – Environnement".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Composites à fibres de carbone – Environnement"
Cazeneuve, C., e J. C. Maile. "ÉTUDE DU COMPORTEMENT DE COMPOSITES À FIBRES DE CARBONE SOUS DIFFÉRENTES VITESSES DE DÉFORMATION". Le Journal de Physique Colloques 46, n.º C5 (agosto de 1985): C5–551—C5–556. http://dx.doi.org/10.1051/jphyscol:1985571.
Texto completo da fonteGornet, Laurent, Romain Hamonou, Frédéric Jacquemin, Stéphane Auger e Pierre Chalandon. "Détermination de la souplesse hors plan d’un assemblage de composites boulonnés à l’aide d’une démarche d’homogénéisation". Matériaux & Techniques 106, n.º 3 (2018): 302. http://dx.doi.org/10.1051/mattech/2018052.
Texto completo da fonteLUYCKX, Jean. "Composites à fibres de carbone dans le génie civil". Plastiques et composites, janeiro de 1999. http://dx.doi.org/10.51257/a-v1-am5620.
Texto completo da fonteLUYCKX, Jean. "Composites à fibres de carbone dans le génie civil". Les superstructures du bâtiment, fevereiro de 1999. http://dx.doi.org/10.51257/a-v1-c5440.
Texto completo da fonteIthurralde, Guillaume, e Franck Maurel. "Inspection Ultrasonore Robotisée de Pièces Composites". e-journal of nondestructive testing 28, n.º 9 (setembro de 2023). http://dx.doi.org/10.58286/28516.
Texto completo da fonteTeses / dissertações sobre o assunto "Composites à fibres de carbone – Environnement"
Shi, Yang. "Economie circulaire pour les composites à fibres de carbone : du déchet aéronautique vers les composites carbone+ thermoplastiques recyclés". Electronic Thesis or Diss., Bordeaux, 2022. http://www.theses.fr/2022BORD0153.
Texto completo da fonteSince their industrialization, the production of carbon fiber composites is continuously increasing. When recycling carbon fiber composites, only the fibers are recycled. The matrix is "removed" by pyrolysis, solvolysis or vapour-thermolysis, processes that cause little degradation of the fibres. In order to create a demand for recycled carbon fibers, it is necessary to add value to recycled fibers by demonstrating the feasibility of manufacturing high quality composite parts (recycled fiber + matrix).Semi-long recycled fiber architectures with very good alignment were produced by the laboratory's patented realignment technology that ensures optimal exploitation of recycled carbon fiber properties. In order to control and optimize the properties of the new composite (staple fiber), the mechanisms of load transfer between fibers were studied, and the useful properties of the matrix were identified. Particular attention has been paid to the calculation of the load transfer length between two staple fibers as a function of the properties of the recycled fiber/thermoplastic matrix interface. Indeed, our objective is not only to find optimal solutions in terms of strength but also solutions that allow to limit the environmental impact, hence our choice of thermoplastic matrices (including recycled) for this study.All the results of the numerical simulations were validated by comparison with experimental results. In addition, recycled carbon fiber/thermoplastic matrix composites (PA6 and PC) were implemented and tested. These materials have fiber contents higher than 50% and offer better mechanical properties than the same materials with epoxy matrix.An environmental analysis was performed on the example of a portable wind turbine blade by comparing the impacts of the raw material, manufacturing and end of life of a part made with different materials (light alloy, glass fiber composite, recycled fiber composites). This demonstrates the interest of recycled carbon fibers associated with a recycled thermoplastic matrix, to minimize the environmental impact while maximizing mechanical performance
Pailler, Christophe. "Étude de la dissymétrie apportée par l'environnement spatial sur un composite multicouche à matrice organique". Toulouse, ENSAE, 1993. http://www.theses.fr/1993ESAE0011.
Texto completo da fonteFradet, Guillaume. "Physico-chimie de l’interface fibres/matrice : applications aux composites Carbone/Carbone". Thesis, Bordeaux 1, 2013. http://www.theses.fr/2013BOR14948/document.
Texto completo da fonteThis work focuses on the physical chemistry of the fiber/matrix interface applied to composites carbon/carbon. The surface of carbon fibers was modified by various surface treatments. The carbon fibers surface variation was evaluated by inverse gas chromatography at infinite dilution, SEM, AFM, TEM, Raman... After these characterizations, surface treatments were selected for the realization of C/C composites. The mechanical properties of composites at modulated interfaces (fibers/matrix bonding) were evaluated. Finally, a correlation between surface modification of carbon fibers and macroscopic behavior of composite C/C was established
Breban, Philippe. "Composites aluminium fibres de carbone obtenus par filage". Châtenay-Malabry, Ecole centrale de Paris, 1990. http://www.theses.fr/1990ECAP0130.
Texto completo da fonteMercier, Sylvie. "Réactivité interfaciale de systèmes aluminium-fibres de carbone et aluminium-fibres céramique". Mulhouse, 1994. http://www.theses.fr/1994MULH0303.
Texto completo da fonteDesprés, Jean-François. "Les interphases de carbone pyrolytique dans les composites carbone-carbure de silicium". Pau, 1993. http://www.theses.fr/1993PAUU3021.
Texto completo da fonteLalet, Grégory. "Composites aluminium/fibres de carbone pour l'électronique de puissance". Phd thesis, Université Sciences et Technologies - Bordeaux I, 2010. http://tel.archives-ouvertes.fr/tel-00538480.
Texto completo da fonteLouys, François. "Rôle des interfaces dans le mécanisme d'oxydation des composites carbone-carbone". Mulhouse, 1985. http://www.theses.fr/1985MULH0000.
Texto completo da fonteMolleyre, Jean-François. "Modifications texturales de fibres de carbone par oxydation en phase gazeuse, en vue de l'élaboration de composites : modélisation structurale de fibres haut module : propriétés mécaniques des fibres et composites". Vandoeuvre-les-Nancy, INPL, 1992. http://www.theses.fr/1992INPL001N.
Texto completo da fonteLaurent, Fabrice. "Croissance de nanotubes de carbone sur des fibres de carbone : application aux matériaux composites". Thesis, Mulhouse, 2016. http://www.theses.fr/2016MULH7632/document.
Texto completo da fonteThe research presented in this work aims to develop the oxyacetylene flame method for the Carbon Nanotubes (CNT) synthesis at the Laboratory of Physics and Mechanics of Textiles. The simplicity and the degree of innovation of this process make of it a serious candidate for manufacturing a pilot in order to produce new kind of tridimensional material made of CNT having grew on carbon fibres. This work consisted of:- Make a bibliographic study,- Establish a proof of concept of the growth of CNT,- Design and manufacture a device allowing process control,- Setup the process of growth on the fibres,- Identify the main parameters influencing CNT quality and quantity,- Characterize CNT,- Assume the CNT growth on carbon fibers,- Integrate these multidimensional materials into an organic matrix to realize structural composite materials,- Characterize these materials,- Describe and explain the growth mechanism in the flame.First, we focused our work on the fibres chemical treatment before flame exposition to evaluate the NTC growth conditions by varying notably, the fibres exposition temperature and the quality of the catalysts. After, the NTC syntheses on carbon fibres (CF) was done. The multidimensional product was characterized par various examinations and analyses. Composite materials were molded with epoxy resin to evaluate mechanical properties of NTC-FC. Young’s modulus was increased and tensile strength at break decreased. Transverse and longitudinal electrical properties were increased by 500 to 800 % respectively. Finally, we proposed NTC growth mechanisms. They are directly linked to the chemical and physical catalyst particles properties
Livros sobre o assunto "Composites à fibres de carbone – Environnement"
Delmonte, John. Technology of carbon and graphite fiber composites. Malabar, Fla: R.E. Krieger Pub. Co., 1987.
Encontre o texto completo da fontePierre, Delhaes, ed. Fibers and composites. London: Taylor & Francis, 2003.
Encontre o texto completo da fonteMorgan, Peter. Carbon Fibers and Their Composites. CRC, 2005.
Encontre o texto completo da fonteMorgan, Peter. Carbon Fibers and Their Composites. Taylor & Francis Group, 2005.
Encontre o texto completo da fonteMorgan, Peter. Carbon Fibers and Their Composites. Taylor & Francis Group, 2005.
Encontre o texto completo da fonteDelhaes, Pierre. Fibers and Composites. Taylor & Francis Group, 2003.
Encontre o texto completo da fonteDelhaes, Pierre. Fibers and Composites. Taylor & Francis Group, 2003.
Encontre o texto completo da fonteDelhaes, Pierre. Fibers and Composites. Taylor & Francis Group, 2003.
Encontre o texto completo da fontePolymercarbon Nanotube Composites Preparation Properties And Applications. Woodhead Publishing, 2011.
Encontre o texto completo da fonteKodolov, Vladimir I., A. K. Haghi, P. M. Sivakumar e Gennady Efremovich Zaikov. Nanostructure, Nanosystems, and Nanostructured Materials: Theory, Production and Development. Apple Academic Press, Incorporated, 2013.
Encontre o texto completo da fonte