Siga este link para ver outros tipos de publicações sobre o tema: Composite materials Al/D.

Teses / dissertações sobre o tema "Composite materials Al/D"

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores trabalhos (teses / dissertações) para estudos sobre o assunto "Composite materials Al/D".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja as teses / dissertações das mais diversas áreas científicas e compile uma bibliografia correta.

1

Wenger, Wolfgang. "Investigations into 3-D reinforcements for composite materials". Thesis, University of Ulster, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358671.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Morgan, Margaret. "Geometric modelling of 3-D woven reinforcements in composite materials". Thesis, University of Ulster, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.423442.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Meier, Dominik [Verfasser], e Leonhard M. [Akademischer Betreuer] Reindl. "Millimeter-wave tomographic imaging of composite materials". Freiburg : Universität, 2021. http://d-nb.info/1233197053/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Avery, William Byron. "A study of the mechanical behavior of a 2-D carbon-carbon composite". Diss., Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/76091.

Texto completo da fonte
Resumo:
The objective of this study was to observe and characterize the out-of-plane fracture of a 2-D carbon-carbon composite and to gain an understanding of the factors influencing the stress distribution in such a laminate. The experimental portion of this study consisted of performing an out-of-plane tensile test in a scanning electron microscope and determining the modes of failure. Failure was found to be interlaminar, with cracks propagating along the fiber-matrix interface. Finite element analyses of a two-ply carbon-carbon composite under in-plane, out-of-plane, and thermal loading were performed. Stress distributions were studied as a function of stacking sequence, undulation aspect ratio, and undulation offset ratio. The results indicated that under out-of-plane loading σx and τxz were strongly dependent on the geometric parameters studied, but σz and σy were relatively independent of geometry. Under in-plane loading all components of stress were strong functions of the geometry, and large interlaminar stresses were predicted in regions of undulation. The thermal analysis predicted the presence of large in-plane normal stresses throughout the laminate and large interlaminar stresses in regions of undulation. An elasticity solution was utilized to analyze an orthotropic fiber in an isotropic matrix under uniform thermal load. The analysis reveals that the stress distributions in the fiber are singular when the radial stiffness Crr is greater than the hoop stiffness C₀₀. Conversely, if Crr < C₀₀ the maximum stress in the composite is finite and occurs at the fiber-matrix interface. In both cases the stress distributions are radically different than those predicted assuming the fiber to be transversely isotropic (Crr = C₀₀).
Ph. D.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Kuttner, Christian [Verfasser]. "Macromolecular Interphases and Interfaces in Composite Materials / Christian Kuttner". München : Verlag Dr. Hut, 2014. http://d-nb.info/1063222036/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Kraiem, Nada. "Impression 3D de matériaux composites à base de diamant pour des applications de gestion thermique". Electronic Thesis or Diss., Bordeaux, 2024. http://www.theses.fr/2024BORD0129.

Texto completo da fonte
Resumo:
Avec la tendance à la miniaturisation croissante des équipements électriques et à l'augmentation constante de la densité de puissance dans les dispositifs à base de semiconducteurs, la gestion efficace de la chaleur est devenue un enjeu majeur pour les chercheurs. En effet, cette évolution technologique impose des contraintes de plus en plus strictes en termes de dissipation thermique, nécessitant des solutions innovantes pour garantir une meilleure durabilité et fiabilité des composants. Dans ce contexte, l'utilisation de matériaux composites offrant une conductivité thermique élevée et un coefficient de dilatation thermique faible par rapport aux métaux purs est devenue essentielle pour résoudre les problèmes de surchauffe des composants électroniques. L'intégration de matériaux avancés tels que le diamant (D), avec ses propriétés exceptionnelles de conductivité thermique et de dureté, constitue une option privilégiée pour renforcer les matrices métalliques. Toutefois, son incorporation dans les matériaux composites nécessite la création d'une interface D-métal bien définie, à la fois pour éviter la formation de porosité et assurer un transfert efficace des propriétés thermiques. La fabrication additive de matériaux 3D par fusion laser émerge comme une solution prometteuse, non seulement pour la facilité de mise en œuvre de ces composites, mais aussi pour la création de structures complexes dédiées à la dissipation de chaleur. Ces structures jouent un rôle crucial dans l'optimisation de la surface d'échange thermique par convection avec l'air environnant, permettant ainsi une dissipation efficace de la chaleur générée par les dispositifs électroniques modernes.Dans cette étude, l`impression 3D du cuivre (Cu) a été réalisée grâce à l`ajout d`une quantité optimale d’aluminium. Cette approche a permis d'améliorer considérablement la densification de matériaux à base de cuivre, malgré les défis posés par sa forte réflectivité. Par la suite, l'investigation approfondie et l'optimisation de l`impression 3D laser de l'alliage AlSi10Mg, avant et après l'incorporation de D, ont été réalisées. Enfin, une étape cruciale de post-traitement a été optimisée consistant à polir des matériaux composites Al/D par ablation laser.Ce travail a été réalisé dans le cadre d'une collaboration internationale entre l'Université du Nebraska, Lincoln aux États-Unis d'Amérique, et l'Université de Bordeaux en France
With the trend towards miniaturization of electrical equipment and the constant increase in power density in semiconductor devices, efficient heat management has become a major concern for researchers. Indeed, this technological evolution imposes increasingly strict constraints in terms of thermal dissipation, necessitating innovative solutions to ensure better durability and reliability of components. In this context, the use of composite materials offering high thermal conductivity and low coefficient of thermal expansion compared to pure metals has become essential to address overheating issues in electronic components. The utilization of advanced materials such as diamond (D), with exceptional thermal conductivity and hardness properties, stands out as a preferred choice for reinforcing metal matrices. However, its incorporation into composite materials requires the creation of a well-defined D-metal interface, both to avoid porosity formation and to ensure efficient transfer of thermal properties. Additive manufacturing of 3D materials by laser fusion is emerging as a promising solution, not only for the ease of implementation of these composites, but also for the creation of complex structures dedicated to heat dissipation. These structures play a crucial role in optimizing the heat exchange surface by convection with the surrounding air, thus allowing efficient dissipation of heat generated by modern electronic devices.In this study, 3D printing of copper (Cu) was achieved through the addition of an optimal amount of aluminum. This approach significantly improved the densification of copper-based materials, despite the challenges posed by its high reflectivity. Subsequently, in-depth investigation and optimization of laser 3D printing of the AlSi10Mg alloy, before and after the incorporation of D, were carried out. Finally, a crucial post-processing step was optimized, consisting of polishing Al/D composite materials using laser ablation.This work was carried out as part of an international collaboration between the University of Nebraska, Lincoln in the United States of America, and the University of Bordeaux in France
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Jordan, Thomas [Verfasser], e Markus [Akademischer Betreuer] Antonietti. "CxNy-materials from supramolecular precursors for “All-Carbon” composite materials / Thomas Jordan ; Betreuer: Markus Antonietti". Potsdam : Universität Potsdam, 2017. http://d-nb.info/1219077615/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

André, Rute da Conceição Tavares [Verfasser]. "Bioinspired composite materials and biomimetic catalysis / Rute da Conceição Tavares André". Mainz : Universitätsbibliothek Mainz, 2014. http://d-nb.info/1052002560/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Tritschler, Ulrich [Verfasser]. "Hierarchically Structured Composite Materials by Gluing of Anisotropic Nanoparticles / Ulrich Tritschler". Konstanz : Bibliothek der Universität Konstanz, 2015. http://d-nb.info/1113109793/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Ji, Yuanchun [Verfasser]. "Polyoxometalate-based nanocarbon composite materials as lithium ion battery electrodes / Yuanchun Ji". Ulm : Universität Ulm, 2019. http://d-nb.info/1178527913/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
11

Richter, Marina Juliane Verfasser], Alexander [Akademischer Betreuer] Böker e Andrij Z. [Akademischer Betreuer] [Pich. "Synthesis of protein/mineral composite materials / Marina Juliane Richter ; Alexander Böker, Andrij Pich". Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1130590445/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
12

Lammel, Patricia [Verfasser]. "Development and characterization of erosion-resistant metallic layers on composite materials / Patricia Lammel". München : Verlag Dr. Hut, 2013. http://d-nb.info/1033041688/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
13

Waraich, Sajjad Mahmood [Verfasser], e Henning [Akademischer Betreuer] Menzel. "Biomimetic Fabrication of Organic-Inorganic Composite Materials / Sajjad Mahmood Waraich ; Betreuer: Henning Menzel". Braunschweig : Technische Universität Braunschweig, 2012. http://d-nb.info/1175824097/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
14

Lammel, Anja-Maria Patricia [Verfasser]. "Development and characterization of erosion-resistant metallic layers on composite materials / Patricia Lammel". München : Verlag Dr. Hut, 2013. http://d-nb.info/1033041688/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
15

Richter, Marina Juliane [Verfasser], Alexander Akademischer Betreuer] Böker e Andrij Z. [Akademischer Betreuer] [Pich. "Synthesis of protein/mineral composite materials / Marina Juliane Richter ; Alexander Böker, Andrij Pich". Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/1130590445/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
16

Pompe, Cornelius. "Development of new in-situ hardening and bioactivated composite materials for orthopedic indications". Göttingen Cuvillier, 2008. http://d-nb.info/990811468/04.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
17

Tay, Pei Kun Richie. "Synthesis of composite hydrogels incorporating D,L-cyclic peptide nanotubes as a platform for materials engineering". Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/78244.

Texto completo da fonte
Resumo:
Thesis (S.M.)--Harvard-MIT Program in Health Sciences and Technology, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 27-30).
Composite hydrogels find increasing use as biomaterials because the addition of a filler often improves on the material properties of the original matrix, or provides new optical, magnetic, conductive or bioactive functionalities not inherent to the hydrogel. In this work we synthesized nanocomposite gelatin methacrylate (GelMA) hydrogels that incorporate D,L-cyclic peptide nanotubes. These nanotubes are biocompatible, stiff and their physical and chemical properties can be tailored simply by changing the amino acid sequence of the peptide. We show that the nanotubes successfully integrated into the hydrogel matrix and provided some mechanical reinforcement, without affecting hydrogel porosity or hydration characteristics. We will be using this composite system as a platform for engineering hydrogels with unique physical and biological properties to the hydrogel, for application as biological scaffolds.
by Pei Kun Richie Tay.
S.M.
Estilos ABNT, Harvard, Vancouver, APA, etc.
18

Sann, Kerstin [Verfasser]. "Investigation of composite electrolytes with structured silica materials for lithium ion batteries / Kerstin Sann". Gießen : Universitätsbibliothek, 2017. http://d-nb.info/1122972369/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
19

Elkhooly, Tarek Abbas Ali [Verfasser]. "Coating of surfaces of composite materials with enzymatically formed biosilica / Tarek Abbas Ali Elkhooly". Mainz : Universitätsbibliothek Mainz, 2014. http://d-nb.info/1048502090/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
20

Khosravani, Mohammad Reza [Verfasser]. "Experimental investigations on the dynamic behavior and fracture of composite materials / Mohammad Reza Khosravani". Siegen : Universitätsbibliothek der Universität Siegen, 2018. http://d-nb.info/1160443505/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
21

Duan, Yaqing [Verfasser], Cordt [Akademischer Betreuer] Zollfrank, Cordt [Gutachter] Zollfrank e Werner [Gutachter] Kunz. "Chitin based composite materials / Yaqing Duan ; Gutachter: Cordt Zollfrank, Werner Kunz ; Betreuer: Cordt Zollfrank". München : Universitätsbibliothek der TU München, 2020. http://d-nb.info/1226934358/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
22

Izadifar, Mohammadreza [Verfasser], e P. [Akademischer Betreuer] Thissen. "Interaction in Calcium Silicate Hydrates and new Composite Materials / Mohammadreza Izadifar ; Betreuer: P. Thissen". Karlsruhe : KIT-Bibliothek, 2021. http://d-nb.info/1234063727/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
23

Boden, André [Verfasser]. "Copper Graphite Composite Materials : A Novel Way to Engineer Thermal Conductivity and Expansion / André Boden". Berlin : Freie Universität Berlin, 2015. http://d-nb.info/1078017557/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
24

Wickenheisser, Martin [Verfasser]. "Synthesis of metal-organic frameworks and monolithic composite materials for water sorption applications / Martin Wickenheisser". Düsseldorf : Universitäts- und Landesbibliothek der Heinrich-Heine-Universität Düsseldorf, 2015. http://d-nb.info/107275584X/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
25

Aliyev, Elvin [Verfasser]. "Preparation of two-dimensional materials and their application in thin film composite membranes / Elvin Aliyev". Hamburg : Staats- und Universitätsbibliothek Hamburg Carl von Ossietzky, 2020. http://d-nb.info/1224612108/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
26

Spahn, Johannes [Verfasser], e Ralf [Akademischer Betreuer] Müller. "An Efficient Multiscale Method for Modeling Progressive Damage in Composite Materials / Johannes Spahn. Betreuer: Ralf Müller". Kaiserslautern : Technische Universität Kaiserslautern, 2015. http://d-nb.info/106623812X/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
27

Zhu, Jian [Verfasser], e Seema [Akademischer Betreuer] Agarwal. "High-performance Electrospun Polymer Nanofibres and Their Composite Materials with Hectorite / Jian Zhu ; Betreuer: Seema Agarwal". Bayreuth : Universität Bayreuth, 2019. http://d-nb.info/1196201730/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
28

Otto, Christian [Verfasser], e Volker [Akademischer Betreuer] Abetz. "Electrically Conductive Composite Materials from Carbon Nanotube Decorated Polymer Powder Particles / Christian Otto ; Betreuer: Volker Abetz". Hamburg : Staats- und Universitätsbibliothek Hamburg, 2017. http://d-nb.info/1150183748/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
29

Carter, Robert Hansbrough. "Transmitted light intensity as a nondestructive evaluation technique for glass/epoxy composite laminates". Thesis, This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-11242009-020334/.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
30

Cheng, Chun-Chung. "3-D finite element method for micromechanical analysis in fibrous composite material". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1995. http://handle.dtic.mil/100.2/ADA302950.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
31

Weber, Tobias [Verfasser]. "Numerical Field Simulations of Composite Material / Tobias Weber". Saarbrücken : Saarländische Universitäts- und Landesbibliothek, 2020. http://d-nb.info/1216877734/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
32

Prechtel, Marina [Verfasser], e Günter [Akademischer Betreuer] Leugering. "Optimization of the crack resistance in composite materials = Optimierung der Risswiderstandsfähigkeit von Verbundwerkstoffen / Marina Prechtel. Betreuer: Günter Leugering". Erlangen : Universitätsbibliothek der Universität Erlangen-Nürnberg, 2012. http://d-nb.info/1021570869/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
33

Sen, Kshama Shree [Verfasser]. "Mechanobiological effects of 3D-printed hydrogel-calcium phosphate composite materials on multipotent human mesenchymal stromal cells / Kshama Shree Sen". Aachen : Shaker, 2019. http://d-nb.info/118855266X/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
34

Felger, Julian [Verfasser], Wilfried [Akademischer Betreuer] Becker, Michael [Akademischer Betreuer] Vormwald e Dominique [Akademischer Betreuer] Leguillon. "Modelling crack nucleation in composite materials: a semi-analytical two-scale approach / Julian Felger ; Wilfried Becker, Michael Vormwald, Dominique Leguillon". Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2020. http://d-nb.info/1213907934/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
35

Lauerbach, Laura [Verfasser], Anja [Gutachter] Schlömerkemper e Martin [Gutachter] Kruzik. "Stochastic Homogenization in the Passage from Discrete to Continuous Systems - Fracture in Composite Materials / Laura Lauerbach ; Gutachter: Anja Schlömerkemper, Martin Kruzik". Würzburg : Universität Würzburg, 2020. http://d-nb.info/1220634239/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
36

Kehrle, Julian [Verfasser], Bernhard [Akademischer Betreuer] Rieger, Johann Peter [Gutachter] Plank e Bernhard [Gutachter] Rieger. "Surface Hydrosilylation: The Key to Silicon Nanocrystal Hybrid and Composite Materials / Julian Kehrle ; Gutachter: Johann Peter Plank, Bernhard Rieger ; Betreuer: Bernhard Rieger". München : Universitätsbibliothek der TU München, 2018. http://d-nb.info/1170321615/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
37

Xiaozhuang, Zhou [Verfasser]. "Dynamic polydimethylsiloxane based polymer composites for functional materials / Zhou Xiaozhuang". Saarbrücken : Saarländische Universitäts- und Landesbibliothek, 2020. http://d-nb.info/1224474864/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
38

Salas, Ramirez Mariugenia [Verfasser], Walter [Akademischer Betreuer] [Gutachter] Lang e Axel [Gutachter] Herrmann. "Wireless Sensors and Actuators for Structural Health Monitoring of Fiber Composite Materials / Mariugenia Salas Ramirez ; Gutachter: Walter Lang, Axel Herrmann ; Betreuer: Walter Lang". Bremen : Staats- und Universitätsbibliothek Bremen, 2017. http://d-nb.info/1133240682/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
39

Hum, Jasmin [Verfasser], e Aldo R. [Gutachter] Boccaccini. "Bioactive glass combined with natural derived proteins as composite materials for the application in bone tissue engineering / Jasmin Hum. Gutachter: Aldo R. Boccaccini". Erlangen : Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 2016. http://d-nb.info/1103801953/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
40

Nazarinezhad, Giashi Abolhasan [Verfasser], Chokri [Gutachter] Cherif e Jens-Peter [Gutachter] Majschak. "Modeling and Simulation of High Dynamic Processes for Laminated Composite Materials with Nonlinear Characteristics / Abolhasan Nazarinezhad Giashi ; Gutachter: Chokri Cherif, Jens-Peter Majschak". Dresden : Technische Universität Dresden, 2019. http://d-nb.info/1226944892/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
41

Margossian, Alexane [Verfasser]. "Forming of tailored thermoplastic composite blanks: material characterisation, simulation and validation / Alexane Margossian". München : Verlag Dr. Hut, 2017. http://d-nb.info/1137024399/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
42

Lozano, Osorno Fernando [Verfasser]. "Simultaneous Drying and Separation of Composite Agricultural Material for Hay Processing / Fernando Lozano Osorno". Kassel : Universitätsbibliothek Kassel, 2015. http://d-nb.info/107776118X/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
43

von, Müller Alexander [Verfasser], Rudolf [Akademischer Betreuer] Neu, Rudolf [Gutachter] Neu e Christoph [Gutachter] Broeckmann. "Towards a plasma-facing component design with melt infiltrated tungsten-copper composite heat sink materials / Alexander von Müller ; Gutachter: Rudolf Neu, Christoph Broeckmann ; Betreuer: Rudolf Neu". München : Universitätsbibliothek der TU München, 2019. http://d-nb.info/1204562318/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
44

Zöcke, Christine Marguerite [Verfasser]. "Quantitative analysis of defects in composite material by means of optical lockin thermography / Christine Marguerite Zöcke". Aachen : Shaker, 2010. http://d-nb.info/1080766839/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
45

Gizer, Gökhan [Verfasser]. "Role of Additives on the Kinetic and Thermodynamic Properties of Mg(NH2)2+LiH Reactive Hydride Composite / Gökhan Gizer ; Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Department of Nanotechnolgy". Hamburg : Helmut-Schmidt-Universität, Bibliothek, 2020. http://d-nb.info/1213040604/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
46

Ravi, Prame Manush. "Fracture Properties of Thermoplastic Composites Manufactured Using Additive Manufacturing". Youngstown State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1516191324564382.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
47

Saenko, Ivan [Verfasser], Olga [Gutachter] Fabrichnaya, Olga [Akademischer Betreuer] Fabrichnaya e Florian [Gutachter] Mertens. "Thermodynamic modelling as applied to the development of TRIP-Matrix-Composite materials: The Fe–Mg–Mn–Ti–Zr–O system / Ivan Saenko ; Gutachter: Olga Fabrichnaya, Florian Mertens ; Betreuer: Olga Fabrichnaya". Freiberg : Technische Universität Bergakademie Freiberg, 2021. http://d-nb.info/1226158889/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
48

Siong, Victor [Verfasser]. "Research and optimizations of iron composites as negative electrode materials for aqueous alkaline batteries / Victor Siong". Ulm : Universität Ulm, 2019. http://d-nb.info/1183099711/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
49

Shalbafan, Ali Verfasser], e Arno [Akademischer Betreuer] [Frühwald. "Investigation of Foam Materials to be Used in Lightweight Wood Based Composites / Ali Shalbafan. Betreuer: Arno Frühwald". Hamburg : Staats- und Universitätsbibliothek Hamburg, 2013. http://d-nb.info/1036729729/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
50

Shalbafan, Ali [Verfasser], e Arno [Akademischer Betreuer] Frühwald. "Investigation of Foam Materials to be Used in Lightweight Wood Based Composites / Ali Shalbafan. Betreuer: Arno Frühwald". Hamburg : Staats- und Universitätsbibliothek Hamburg, 2013. http://d-nb.info/1036729729/34.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia