Bibliografias temáticas / Composite materials Al

Índice

  1. Artigos de revistas
  2. Teses / dissertações
  3. Livros
  4. Capítulos de livros
  5. Trabalhos de conferências
  6. Relatórios de organizações

Literatura científica selecionada sobre o tema "Composite materials Al"

Autor: Grafiati
Publicado: 7 de setembro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Composite materials Al".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Composite materials Al"

1

Khomenko, E. V., N. I. Grechanyuk e V. Z. Zatovsky. "Modern composite materials for switching and welding equipment. information 1. powdered composite materials". Paton Welding Journal 2015, n.º 10 (28 de outubro de 2015): 36–42. http://dx.doi.org/10.15407/tpwj2015.10.06.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Öztaş, Saniye Karaman. "Fiber Reinforced Composite Materials in Architecture". Applied Mechanics and Materials 789-790 (setembro de 2015): 1171–75. http://dx.doi.org/10.4028/www.scientific.net/amm.789-790.1171.

Texto completo da fonte
Resumo:
Composite materials are made from two or more constituent materials with significantly different physical or chemical properties. The materials work together to give the composite more excellent properties than its components.Fiber reinforced composite materials constitute a widely used group of the composites. There are many researches about fiber reinforced composites. This study focused on fiber reinforced composite materials used in architecture unlike other researches. It was aimed to specify the benefits of the fiber composite materials for architecture and discussed several recent developments related to these materials. A literature review was made by grouping composites materials. The study reported that more research is needed for fiber reinforced composites to improve their technical performance, environmental and economic properties.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Lagerlof, K. P. D. "Transmission electron microscopy of composite materials". Proceedings, annual meeting, Electron Microscopy Society of America 46 (1988): 1012–15. http://dx.doi.org/10.1017/s0424820100107125.

Texto completo da fonte
Resumo:
Although most materials contain more than one phase, and thus are multiphase materials, the definition of composite materials is commonly used to describe those materials containing more than one phase deliberately added to obtain certain desired physical properties. Composite materials are often classified according to their application, i.e. structural composites and electronic composites, but may also be classified according to the type of compounds making up the composite, i.e. metal/ceramic, ceramic/ceramie and metal/semiconductor composites. For structural composites it is also common to refer to the type of structural reinforcement; whisker-reinforced, fiber-reinforced, or particulate reinforced composites [1-4].For all types of composite materials, it is of fundamental importance to understand the relationship between the microstructure and the observed physical properties, and it is therefore vital to properly characterize the microstructure. The interfaces separating the different phases comprising the composite are of particular interest to understand. In structural composites the interface is often the weakest part, where fracture will nucleate, and in electronic composites structural defects at or near the interface will affect the critical electronic properties.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Kala, Shiva Kumar, e Chennakesava Reddy Alavala. "Enhancement of Mechanical and Wear Behavior of ABS/Teflon Composites". Trends in Sciences 19, n.º 9 (8 de abril de 2022): 3670. http://dx.doi.org/10.48048/tis.2022.3670.

Texto completo da fonte
Resumo:
In the present investigations, Most of the engineering applications of metallic materials are replaced by polymeric based composite materials. Because of the low cost and accessible handling of polymer composite materials such as Acrylonitrile butadiene styrene (ABS) matrix materials are used to make the composites with additions of filler enhance the properties of the matrix materials. In the present study, ABS matrix material is used to make the composite materials by adding the Teflon materials. Investigations are carried out to find the enhancement of the composites' mechanical properties. Optimizing the process parameters is done to identify the composite's most optimum used to get composite with better mechanical properties. SEM analysis and wear Debris are investigated to study the microscopic surface nature and behavior of the composites.
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Khosravani, Mohammad Reza. "Composite Materials Manufacturing Processes". Applied Mechanics and Materials 110-116 (outubro de 2011): 1361–67. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.1361.

Texto completo da fonte
Resumo:
— Using Composite materials are growing more and more today and we have to use them in possible situation. One of the Composite materials applications is on the Airplane and aero space. Reduction of Airplane weight and more adaptability with nature are examples of benefit of using composite materials in aerospace industries. In this article process of manufacturing of composite materials and specially carbon fiber composite are explained. Advance composite materials are common today and are characterized by the use of expensive, high-performance resin systems and high-strength, high-stiffness fiber reinforcement. The aerospace industry, including military and commercial aircraft of all types, is the major customer for advanced composites. Product range now includes materials for low pressure and low temperature. Some using composite materials in aero space are as follow: Satellite Components, Thin Walled Tubing for Aircraft and Satellites, launch vehicle components and honeycomb structures.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Ibraimov, T., e Y. Tashpolotov. "Technology for Producing Composite Materials Based on Multi-component Man-generic Raw Materials". Bulletin of Science and Practice 6, n.º 12 (15 de dezembro de 2020): 274–80. http://dx.doi.org/10.33619/2414-2948/61/29.

Texto completo da fonte
Resumo:
The state and prospects of development of production of composites based on various types of multicomponent raw materials (silicon oxide, slag, etc.) and their components are considered. Modern achievements in the field of condensed matter physics of composite materials with mineral matrices and various dimensional levels of fillers are considered. The approaches of leading scientific schools to the creation of composites are analyzed; it is revealed that many issues of obtaining multicomponent composite materials remain open. It is concluded that the optimization of the process of obtaining composites based on multicomponent raw materials should be carried out by changing the target functions and parameters that take into account all types of interaction of components. A method for selecting mineral matrices for the production of composite materials has been developed, the essence of which is to compare the component compositions of raw materials and composite materials, and the search for matrices is performed by the maximum optimal value of intermolecular distances in multicomponent raw materials and composite materials.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Chen, Jieng-Chiang, e Bo-Yan Huang. "Flame-retardant corrugated paper/epoxy composite materials". Modern Physics Letters B 33, n.º 14n15 (28 de maio de 2019): 1940004. http://dx.doi.org/10.1142/s0217984919400049.

Texto completo da fonte
Resumo:
The waterproof and flame-retardant properties of corrugated paper (CP) reinforced epoxy resin sandwich composites are discussed. Two composites, a CP-reinforced epoxy composite (CP/E composite) and a CP-reinforced flame-retardant epoxy composite (CP/FRE composite), were developed in this study. A dipping bath was developed for impregnating the paper with epoxy and a flame-retardant epoxy solution to make the CP/P and CP/FRE composite panels. A room-temperature-cured epoxy resin was blended with various contents (10%, 20%, and 30%) of phosphorus-based flame-retardant compounds and then was used as a matrix to make CP/FRE-10, CP/FRE-20, and CP/FRE-30 composite materials. Water absorption tests of these composites were used to estimate the waterproof properties. In addition, vertical and horizontal burning tests were used to evaluate the flame-retardant properties of the composites.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Yamamoto, Tetsuya, Yuya Takahashi e Naoya Toyoda. "Dispersion of Nano-materials in Polymer Composite Materials". MATEC Web of Conferences 333 (2021): 11003. http://dx.doi.org/10.1051/matecconf/202133311003.

Texto completo da fonte
Resumo:
Polymer composites materials are the subject of extensive studies because of their novel properties compared with their constituent materials. Dispersion stability of sub-micron sized particles in the medium is important from the point of colloidal views. In the present study, dispersion of nano-materials in the matrix polymer is one of the most important problems to enhance their mechanical properties. We tackled this problem to carry out surface modification of the nano-materials, such as carbon nano tubes (CNTs), using amphiphilic polymers, polyNvinylacetamide (PNVA), synthesized thorough radical polymerization. Hydrogen bond worked between PNVA onto the modified nano-materials and hydrophilic matrix, such as polyvinyl alcohol (PVA), to enhance surface adhesions and dispersions of the nano-materials in the matrix. As a result, the mechanical properties of their composites materials were strengthened. When CNTs were used in PVA, the transparency of the composite was also increased due to improvement of their dispersions. In addition, if the CNTs formed the networks in the composites, the highly conductive and transparent polymer composite films were fabricated.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Yamamoto, Tetsuya, Yuya Takahashi e Naoya Toyoda. "Dispersion of Nano-materials in Polymer Composite Materials". MATEC Web of Conferences 333 (2021): 11003. http://dx.doi.org/10.1051/matecconf/202133311003.

Texto completo da fonte
Resumo:
Polymer composites materials are the subject of extensive studies because of their novel properties compared with their constituent materials. Dispersion stability of sub-micron sized particles in the medium is important from the point of colloidal views. In the present study, dispersion of nano-materials in the matrix polymer is one of the most important problems to enhance their mechanical properties. We tackled this problem to carry out surface modification of the nano-materials, such as carbon nano tubes (CNTs), using amphiphilic polymers, polyNvinylacetamide (PNVA), synthesized thorough radical polymerization. Hydrogen bond worked between PNVA onto the modified nano-materials and hydrophilic matrix, such as polyvinyl alcohol (PVA), to enhance surface adhesions and dispersions of the nano-materials in the matrix. As a result, the mechanical properties of their composites materials were strengthened. When CNTs were used in PVA, the transparency of the composite was also increased due to improvement of their dispersions. In addition, if the CNTs formed the networks in the composites, the highly conductive and transparent polymer composite films were fabricated.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Kalizhanova, Aliya, Ainur Kozbakova, Bakhyt Eralieva, Murat Kunelbayev e Zhalau Aitkulov. "RESEARCH AND ANALYSIS OF THE PROPERTIES OF COMPOSITE MATERIALS. DEFINITION AND CLASSIFICATION OF COMPOSITE MATERIALS". Вестник КазАТК 128, n.º 5 (19 de outubro de 2023): 131–40. http://dx.doi.org/10.52167/1609-1817-2023-128-5-131-140.

Texto completo da fonte
Resumo:
Unlike conventional materials, composites have become a suitable form for a range of current applications in industry, hospital and sports. This is combined with their remarkable physical, thermal, galvanic and mechanical properties, as well as, in addition, their low weight and investment cost in the given cases. This review article attempts to provide a general concept of composite materials, definition and classification of composite materials, most commonly polymer matrix composites and metal matrix composites. Polypropylene polyurethane and aluminum alloy were selected as matrices for this extract given their attractive properties and their use in various applications. All kinds of research are devoted to a variety of building materials, material processing and various properties. The determination of mechanical data appears to be a significant iterative process in the development and design of composite materials and their components. With regard to the mechanical properties of composite materials, this article highlights some of the uncertainties and limitations that affect the evaluation of mechanical properties, ranging from material constituents, industrial process, test characteristics and environmental conditions.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Teses / dissertações sobre o assunto "Composite materials Al"

1

Freitas, Ricardo Luiz Barros de [UNESP]. "Fabricação, caracterização e aplicações do compósito PZT/PVDF". Universidade Estadual Paulista (UNESP), 2012. http://hdl.handle.net/11449/100281.

Texto completo da fonte
Resumo:
Made available in DSpace on 2014-06-11T19:30:32Z (GMT). No. of bitstreams: 0 Previous issue date: 2012-08-31Bitstream added on 2014-06-13T20:21:16Z : No. of bitstreams: 1 freitas_rlb_dr_ilha.pdf: 3147438 bytes, checksum: 01acb2a6a67b2e11009fd170fd595861 (MD5)
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Um material compósito é constituído pela combinação de dois ou mais materiais, onde se procura sintetizar um novo material multifásico, e que abrigue as melhores características individuais de cada um de seus constituintes. Compósitos de polímeros (matriz) e ferroelétricos (inclusões) podem manifestar piezoeletricidade, ou seja, a produção de uma resposta elétrica devido a uma excitação mecânica, e vice-versa. Nesta tese o material polimérico usado para preparar os filmes ou lâminas de nanocompósitos é o PVDF, e, o material cerâmico é formado por nanopartículas de PZT. Ambos os materiais são dielétricos, porém, com características muito distintas (por exemplo, o PVDF tem aproximadamente 1/4 da densidade e 1/250 da constante dielétrica do PZT). O PZT é muito utilizado em transdutores, principalmente devido aos seus elevados coeficientes piezoelétricos, contudo, é quebradiço e sofre desgaste quando empregado na forma de filmes ou lâminas. Por outro lado, o PVDF é um polímero piezoelétrico que apresenta grande flexibilidade e excelentes resistências mecânica e química, porém, seus coeficientes piezoelétricos são apenas moderados. A fim de se aumentar a flexibilidade do PZT, mistura-se o pó cerâmico, na forma de nanopartículas, com o PVDF, também pulverizado. Na tese, evidencia-se que o compósito constituído por esta combinação cerâmica-polímero proporciona uma nova classe de materiais funcionais com grande potencial de aplicação, por terem combinadas a resistência e rigidez das cerâmicas, e, a elasticidade, flexibilidade, baixa densidade e elevada resistência a ruptura mecânica dos polímeros. O novo material tem grande resistência a choques mecânicos, flexibilidade, maleabilidade, e, principalmente, coeficientes piezoelétricos relativamente elevados. Amostras do compósito...
A composite material is constituted by the combination of two or more materials, which synthesizes a new multiphase material, and has the best individual characteristics of each of its constituents. Polymer composites (matrix) and ferroelectric (inclusions) can express piezoelectricity, i.e. the production of an electrical response due to a mechanical excitation, and vice versa. In this thesis the polymeric material used to prepare the films or slides of nanocomposites is the PVDF, and, ceramic material is formed by PZT nanoparticles. Both materials are dielectrics, however, with very different characteristics (for example, the PVDF is approximately 1/4 density and 1/250 relative permittivity from PZT). The PZT is widely used in transducers, mainly due to their high piezoelectric coefficients, however, is brittle and suffers wear and tear when employed in the form of films or slides. On the other hand, the PVDF is a piezoelectric polymer that offers great flexibility and excellent mechanical and chemical resistances, however, its piezoelectric coefficients are only moderate. In order to increase the flexibility of PZT, ceramic powder is mix, in the form of nanoparticles, with PVDF, also sprayed. In theory, it becomes evident that composite consisting of this ceramic- polymer combination delivers a new class of functional materials with great potential for application, because they combine the strength and rigidity of ceramics, and elasticity, flexibility, low density and high resistance to mechanical disruption of polymers. The new material has great resistance to mechanical shock, flexibility, suppleness, and, primarily, relatively high piezoelectric coefficients. PZT/PVDF composite samples were fabricated and characterized aiming to applications such as: piezoelectric actuators, acoustic emission detectors, and energy... (Complete abstract click electronic access below)
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Palmer, Nathan Reed. "Smart Composites evaluation of embedded sensors in composite materials /". Thesis, Montana State University, 2009. http://etd.lib.montana.edu/etd/2009/palmer/PalmerN0809.pdf.

Texto completo da fonte
Resumo:
As an emerging form of renewable energy, horizontal wind turbines have experienced advancements in improving efficiency and reliability. These advances have pushed the limits of current technology used in wind turbines. Smart blades have been proposed as a method of addressing these limitations. Sensor integration within blade construction is the first step in development of smart blades. Thus, several low cost sensors were chosen, 1 axis strain gages, polyvinylidene fluoride films (PVDF), and single mode fiber optics either coated in acrylate or polyimide. To ensure successful bonding between sensor and composite two surface treatment techniques were developed. The first, dipping of the sensor into a bath of 20% by weight solution of nitric acid and the second was submersion of the sensor in the nitric acid for ten seconds prior to removal. These treatments were compared against sensors not surface treated prior to embedding. These sensors were embedded within samples created of fiberglass and epoxy or vinyl ester resin. Two different material tests were conducted. Tensile testing allowed for evaluation of sensor sensitivity, sensor failure point, material tensile modulus, and material tensile strength. Mode I fracture toughness evaluation, indicated the level of successful bonding which occurred during resin curing. Field Emission Scanning Electron Microscopy (FESEM) was conducted to further confirm the level of bonding between resin and sensor, post fracture. Results for embedded strain gages showed an adverse effect for vinyl ester samples. Epoxy samples fared better, thus concluding manufacturing success for epoxy samples, submersion being preferred, and alternative methods needed for vinyl ester samples. PVDF films had good qualitative FESEM images combined with increasing trends. It was concluded that integration for both resin groups with sensors submerged in nitric acid was successful. Fiber optics coated in acrylate also showed good bonding under FESEM imaging as well as testing. It was thus concluded that submersion was the preferred treatment. Lastly, fiber optics coated in polyimide embedded in vinyl ester composites showed significant drawbacks and it was concluded that alternative methods need exploration. Those embedded in epoxy were successfully integrated and submersion in nitric acid showed the most potential.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Karlsson, Johan. "Composite material in car hood : Investigation of possible sandwich materials". Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-45633.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Podnos, Eugene Grigorievich. "Application of fictitious domain method to analysis of composite materials /". Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Yan, Chang (Karen). "On homogenization and de-homogenization of composite materials /". Philadelphia, Pa. : Drexel University, 2003. http://dspace.library.drexel.edu/handle/1860/246.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Symington, Mark C. "Cellulose based composite materials". Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501684.

Texto completo da fonte
Resumo:
Natural fibre composites are a fast growing research area, with many observable research branches. In this thesis, studies into natural fibre composites are undertaken. This includes work into the base fibre mechanical properties, pre-processing techniques and the influence of alkalisation and silanation, both common fibre processing methods used to improve interfacial properties. The effects of these pre-processing techniques were also evaluated using Fourier transform infrared spectroscopy (FT-IR). It was observed that the processing had shown definite signs of altering the surface functional groups. For the studies into the base fibre strengths, it was found that natural fibres are highly variable. with the testing complicated by difficulties in measuring cross sectional areas. It was also found that natural fibres are sensitive to moisture, which affects their mechanical properties somewhat, although no conclusive trends were derived.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Dyer, K. P. "Fatigue of composite materials". Thesis, Swansea University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636755.

Texto completo da fonte
Resumo:
A study has been undertaken of fatigue in glass fibre reinforced composites. Two matrix resins were tested; an isophthalic polyester and a polyurethane-vinyl-ester, which was designed to have superior properties, including toughness and resistance to hydrolytic attack. Three different types of glass fibre fabrics were used for reinforcement, a conventional woven roving and two novel stitch-bonded cloths. The resins and cloths were combined into eight lay-ups in order to consider the effects of matrix, cloth and lay-up on fatigue strength and lifetime. The fatigue study was extended to evaluate the micromechanisms that occur in these composites during fatigue and how damage accumulated throughout the sample lifetime. This involved measuring stiffness changes during fatigue cycling combined with microscopic study of the samples. The damage mechanisms that occurred were similar to those seen by previous authors on different materials and from this, it was concluded that the same mechanisms occur independent of material and lay-up but these parameters affect the point in the specimen lifetime at which the damage occurs. After the data had been obtained, two experimental models were compared against data obtained in the S-N and damage accumulation studies to evaluate whether existing models would predict the behaviour of these composites. It was found that modelling of the linear portion of the S-N curve was fairly accurate but the damage accumulation model was not suitable. The composites were also fatigue tested in various environments and compared against the results obtained in air. Distilled water, sea water and dilute HCl were chosen as being the most likely encountered in the service of these materials. It was found that distilled water and sea water have minimal effect on fatigue in these composites during the short lifetimes used in this study, but it is suggested that the effect would increase with lifetime. The dilute HCl acid also had a smaller than expected effect. This study was backed with various tests which studied methods of water transport into these materials and the effects of the environments on matrix and fibre properties. Finally, initial studies have been made into methods of fabricating these materials into composite tubes with the aim of studying their properties in torsion and possibly tension-torsion.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Yang, Heechun. "Modeling the processing science of thermoplastic composite tow prepreg materials". Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17217.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Gambone, Livio R. "The effect of R-ratio on the mode II fatigue delamination growth of unidirectional carbon/epoxy composites". Thesis, University of British Columbia, 1991. http://hdl.handle.net/2429/29968.

Texto completo da fonte
Resumo:
An investigation of the effect of R-ratio on the mode II fatigue delamination of AS4/3501-6 carbon/epoxy composites has been undertaken. Experiments have been performed on end notched cantilever beam specimens over a wide range of R-ratios (-l ≤R ≤0.50). The measured delamination growth rate data have been correlated with the mode II values of strain energy release rate range ∆G[formula omitted]), maximum strain energy release rate (G[formula omitted]) and stress intensity factor range (∆K[formula omitted]). The growth rate is dependent on the R-ratio over the range tested. For a constant level of ∆G[formula omitted], the crack growth rate decreases with increasing R-ratio. A similar trend is observed when the data is plotted as a function of G[formula omitted]. The effect of plotting the growth rate as a function of ∆K[formula omitted] is to produce an R-ratio dependence opposite to that obtained by either the ∆G[formula omitted] or G[formula omitted] approach. For a constant level of ∆K[formula omitted], the crack growth rate increases with increasing R-ratio. Master equations which completely characterize the fatigue behaviour as a function of ∆G[formula omitted] and ∆K[formula omitted] have been derived, based on the observation that the growth rate law exponent, n and constant, A are unique functions of R-ratio. Values for n are surprisingly large and increase with increasing R-ratio whereas values for A decrease with increasing R-ratio. The effect of time-at-load has been considered in an attempt to explain the existence of the R-ratio dependence of the growth rate. The correct trend can be established for the exponent, n but not for the constant, A. Friction between the crack faces, particularly at higher R-ratios, is proposed as a possible explanation for the observed anomaly. Further evidence of a frictional mechanism operating at higher R-ratios has been discovered through a postmortem fracture surface examination. Additional fractographic observations are presented over the entire range of R-ratios tested. In regions subjected to negative R-ratio cycling, there is no evidence of the characteristic mode II hackle features. Instead, loose rounded particles of matrix material are found. An extensive amount of hackling is observed in regions subjected to low positive R-ratio cycles. The extent of hackle damage visibly decreases in areas where higher levels of R-ratio are imposed. A correlation between the general fracture surface morphology and the fatigue data provides support for the hypothesis that energy for delamination is always available in sufficient quantity, and that growth is dependent on the stresses ahead of the crack tip being sufficiently high.
Applied Science, Faculty of
Materials Engineering, Department of
Graduate
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Counts, William Arthur. "Mechanical behavior of bolted composite joints at elevated temperature". Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/17315.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Composite materials Al"

1

Koohgilani, Mehran. Advanced composite materials: Composite material's history. Poole: Bournemouth University, 2001.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

National Institute for Aviation Research (U.S.), ed. Composite materials handbook. [Warrendale, Pa.]: SAE International on behalf of CMH-17, a division of Wichita State University, 2012.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Institute of Materials (London, England), ed. Engineering composite materials. 2a ed. London: IOM, 1999.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

National Institute for Aviation Research (U.S.), ed. Composite materials handbook: Polymer matrix composites, materials properties. Warrendale, Pa.]: SAE International on behalf of CMH-17, a division of Wichita State University, 2018.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Nielsen, Lauge Fuglsang. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/978-3-540-27680-7.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Chawla, Krishan K. Composite Materials. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2966-5.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Berthelot, Jean-Marie. Composite Materials. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-0527-2.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Kar, Kamal K., ed. Composite Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-49514-8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Chawla, Krishan K. Composite Materials. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-28983-6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Chawla, Krishan Kumar. Composite Materials. New York, NY: Springer New York, 1987. http://dx.doi.org/10.1007/978-1-4757-3912-1.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Capítulos de livros sobre o assunto "Composite materials Al"

1

Ambrosio, L., G. Carotenuto e L. Nicolais. "Composite materials". In Handbook of Biomaterial Properties, 214–69. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5801-9_18.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Askeland, Donald R. "Composite Materials". In The Science and Engineering of Materials, 170–83. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0443-2_16.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Gatewood, B. E. "Composite materials". In Virtual Principles in Aircraft Structures, 582–610. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1165-9_16.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

John, Vernon. "Composite Materials". In Introduction to Engineering Materials, 295–302. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-21976-6_21.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Ramírez, Alejandro Manzano, e Enrique V. Barrera. "Composite Materials". In Synthesis and Properties of Advanced Materials, 149–94. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6339-6_6.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Askeland, Donald R. "Composite Materials". In The Science and Engineering of Materials, 549–94. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-2895-5_16.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Biermann, Dirk. "Composite Materials". In CIRP Encyclopedia of Production Engineering, 1–5. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-642-35950-7_6396-4.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Jones, F. R. "Composite materials". In Chemistry and Technology of Epoxy Resins, 256–302. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-2932-9_8.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Biermann, Dirk. "Composite Materials". In CIRP Encyclopedia of Production Engineering, 311–15. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6396.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Gdoutos, Emmanuel E. "Composite Materials". In Fracture Mechanics, 333–52. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-35098-7_11.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Composite materials Al"

1

Dinesh, A. "Development of Self-Sensing Cement Composite Using Nanomaterials for Structural Health Monitoring of Concrete Columns – A Comprehensive Review". In Sustainable Materials and Smart Practices. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901953-23.

Texto completo da fonte
Resumo:
Abstract. Due to age, structural deterioration, and other factors, concrete constructions such as beams and columns will inevitably deteriorate. The growth of nanomaterials and recent advances in multidisciplinary research has broadened cement composites' applicability in various fields. A self-sensing cement composite can detect its own deformation, strain, and stress by changing its electrical characteristics, which may be measured with electrical resistivity. Carbon-based nanomaterials, such as carbon fiber, carbon black, and carbon nanotube, have a strong potential to increase cement composite's mechanical (strength) and electrical (resistivity, sensitivity) potentials due to their remarkable strength and conductivity. Due to the artificial integration of conductive carbon-based components will generate piezoresistive properties in typical cement composites, transforming them into self-sensing cement composites. As a result, the review focuses primarily on the development of nanoparticle-based self-sensing cement composites and their use in the health monitoring of structural columns. This research critically examines the materials used, fabrication techniques, strength, and sensing methodologies used to develop the self-sensing cement composite. The difficulties of commercializing self-sensing cement composites, as well as potential solutions, are also highlighted. According to the review, the difference in Poisson ratio and youngs modulus between the self-sensing cement composite and columns leads the self-sensing cement composite to have different strength and conductivity before and after embedding in columns. According to the study, the addition of conductive material diminishes the composite's workability due to its large specific surface area. Because of the well-distributed conductive network, the composite's resistivity is significantly lowered. The study also shows that the inclusion of a self-sensing cement composite has no bearing capacity influence on the column. Finally, according to the review, the self-sensing cement composite has the ability to monitor the health of structural columns.
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Kirk, G. E. "Composite Materials for Future Aeroengines". In ASME 1989 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/89-gt-313.

Texto completo da fonte
Resumo:
Aeroengines will only satisfy the future market requirement if advances are made in material and manufacturing technology. Current aeroengine materials are reaching the limits of their development but composite materials have the potential to meet the increased requirements. The use of resin composites has increased and with further improvements could be used more extensively. Metal and ceramics composites are being considered where higher temperature capability is required. However there are a number of problems which are being addressed so that these newer composites can be so used to their full potential with confidence.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Prabhuram, T., V. Somurajan e S. Prabhakaran. "Hybrid composite materials". In International Conference on Frontiers in Automobile and Mechanical Engineering (FAME 2010). IEEE, 2010. http://dx.doi.org/10.1109/fame.2010.5714794.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Sobey, Daniel L., Marcus K. Chao e David L. Garrett. "Interior Composite Materials". In Passenger Car Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1985. http://dx.doi.org/10.4271/851632.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Dayananthan, C., e R. Manikandan. "Nano composite materials". In International Conference on Nanoscience, Engineering and Technology (ICONSET 2011). IEEE, 2011. http://dx.doi.org/10.1109/iconset.2011.6167927.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Razavi Setvati, Mahdi, Zahiraniza Mustaffa, Nasir Shafiq e Zubair Imam Syed. "A Review on Composite Materials for Offshore Structures". In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23542.

Texto completo da fonte
Resumo:
Research into advanced composite materials for offshore structures is growing due to factors such as new challenges in extreme environments, contaminated contexts (chemical, biological) and increasing awareness of earthquake risks. Advances in theory and practice of composites technology have modified the general perception of offshore structures. This paper provided an introduction to composite material and reviewed the application of composites in offshore structures. This survey focused on (1) composites, especially FRP, for repairing offshore structures and also (2) fire protection of composites in offshore structures. Various national and international research projects on uses of composites for marine structures either ongoing or completed during last decades summarized. Future environmental issues considered and eco-friendly sustainable composite suggested and forecasted for new generation of offshore structures.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Rusnakova, S., D. Kucerka, S. Husar, R. Hrmo, M. Kucerkova e V. Rusnak. "Education in Composite Materials". In 2013 International Conference on Interactive Collaborative Learning (ICL). IEEE, 2013. http://dx.doi.org/10.1109/icl.2013.6644572.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Hartman, Paul, e David Erb. "Pultruded Composite Ballistic Materials". In 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2003. http://dx.doi.org/10.2514/6.2003-1556.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Tillmann, W., E. Vogli, K. Weidenmann e K. Fleck. "Reinforced Lightweight Composite Materials". In ITSC2005, editado por E. Lugscheider. Verlag für Schweißen und verwandte Verfahren DVS-Verlag GmbH, 2005. http://dx.doi.org/10.31399/asm.cp.itsc2005p1064.

Texto completo da fonte
Resumo:
Abstract Nowadays the use of light weight materials increases rapidly. Owing to growing requirements regarding material properties and corresponding production costs new material designs and novel production concepts are needed. The low density of aluminium and its alloys is accompanied by lower Young’s modules and lower strengths compared to steel. These disadvantages regarding to stiffness and strength can be overcome by using a composite material consisting of aluminium and embedded endless reinforcing elements. In this work a novel technology based on the thermal spraying process to manufacture endless reinforcing elements for extrusion molding of Al-profiles will be discussed. A specific handling system for arc-spraying Al-alloys onto steel wires has been developed. The influence of the coatings materials and coating parameters on the subsequent extrusion moulding process has been studied.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Khoramishad, Hadi, e Mohammad Vahab Mousavi. "Hybrid polymer composite materials". In THE 7TH INTERNATIONAL CONFERENCE ON APPLIED SCIENCE AND TECHNOLOGY (ICAST 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5123100.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Composite materials Al"

1

Lee, Max. Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, setembro de 1996. http://dx.doi.org/10.21236/ada316048.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

McCullough, Roy L., e Diane S. Kukich. Composites 2000: An International Symposium on Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, junho de 2000. http://dx.doi.org/10.21236/ada384778.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Wadley, H. N. G., J. A. Simmons, R. B. Clough, F. Biancaniello, E. Drescher-Krasicka, M. Rosen, T. Hsieh e K. Hirschman. Composite materials interface characterization. Gaithersburg, MD: National Bureau of Standards, 1988. http://dx.doi.org/10.6028/nbs.ir.87-3630.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Spangler, Lee. Composite Materials for Optical Limiting. Fort Belvoir, VA: Defense Technical Information Center, abril de 2001. http://dx.doi.org/10.21236/ada396124.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Magness, F. H. Joining of polymer composite materials. Office of Scientific and Technical Information (OSTI), novembro de 1990. http://dx.doi.org/10.2172/6334940.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Anderson, D. P., e B. P. Rice. Intrinsically Survivable Structural Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, abril de 2000. http://dx.doi.org/10.21236/ada387309.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Anderson, David P., Chenggang Chen, Larry Cloos e Thao Gibson. Intrinsically Survivable Structural Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, fevereiro de 2001. http://dx.doi.org/10.21236/ada388001.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Papanicolaou, G. C. Effective Behavior of Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, abril de 1985. http://dx.doi.org/10.21236/ada158941.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Wang, S. S., S. S. Wang e Dale W. Fitting. Composite materials for offshore operations. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.sp.887.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Unroe, Marilyn R. Adaptive, Active and Multifunctional Composite and Hybrid Materials Program: Composite and Hybrid Materials ERA. Fort Belvoir, VA: Defense Technical Information Center, abril de 2014. http://dx.doi.org/10.21236/ada600876.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Composite materials Al":
Artigos de revistas Teses / dissertações Livros
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia