Conecte-se

Bibliografias temáticas / Coaxial Injectors / Artigos de revistas

Artigos de revistas sobre o tema "Coaxial Injectors"

Siga este link para ver outros tipos de publicações sobre o tema: Coaxial Injectors.

Autor: Grafiati

Publicado: 20 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Coaxial Injectors".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Xu, Jiabao, Ping Jin, Ruizhi Li, Jue Wang e Guobiao Cai. "Numerical Study on Combustion and Atomization Characteristics of Coaxial Injectors for LOX/Methane Engine". International Journal of Aerospace Engineering 2021 (22 de maio de 2021): 1–16. http://dx.doi.org/10.1155/2021/6670813.

Texto completo da fonte

Resumo:

The LOX/methane engine has an admirable performance under a supercritical state. However, the properties of methane change drastically with varying injection temperature. Because the injector can greatly affect the atomization and combustion, this study performed a three-dimensional numerical simulation of atomization, combustion, and heat transfer in a subscale LOX/methane engine to evaluate the effect of the main fluid parameters with different methane injection temperatures and different injectors on atomization performance and combustion performance. The results show that the larger propellant momentum ratio and Weber number can improve the heat flux and combustion stability in shear coaxial injector, while the influence in swirl coaxial injector is relatively small. Moreover, in shear coaxial injector and in swirl coaxial injector, the larger propellant momentum ratio and Weber number can reduce the droplet size, enhance atomization performance, and improve the combustion efficiency. The numerical model provides an economical method to evaluate the main fluid parameters and proposes new design principles of injectors in LOX/methane engine.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Woo, Seongphil, Jungho Lee, Yeoungmin Han e Youngbin Yoon. "Experimental Study of the Combustion Efficiency in Multi-Element Gas-Centered Swirl Coaxial Injectors". Energies 13, n.º 22 (19 de novembro de 2020): 6055. http://dx.doi.org/10.3390/en13226055.

Texto completo da fonte

Resumo:

The effects of the momentum-flux ratio of propellant upon the combustion efficiency of a gas-centered-swirl-coaxial (GCSC) injector used in the combustion chamber of a full-scale 9-tonf staged-combustion-cycle engine were studied experimentally. In the combustion experiment, liquid oxygen was used as an oxidizer, and kerosene was used as fuel. The liquid oxygen and kerosene burned in the preburner drive the turbine of the turbopump under the oxidizer-rich hot-gas condition before flowing into the GCSC injector of the combustion chamber. The oxidizer-rich hot gas is mixed with liquid kerosene passed through combustion chamber’s cooling channel at the injector outlet. This mixture has a dimensionless momentum-flux ratio that depends upon the dispensing speed of the two fluids. Combustion tests were performed under varying mixture ratios and combustion pressures for different injector shapes and numbers of injectors, and the characteristic velocities and performance efficiencies of the combustion were compared. It was found that, for 61 gas-centered swirl-coaxial injectors, as the moment flux ratio increased from 9 to 23, the combustion-characteristic velocity increased linearly and the performance efficiency increased from 0.904 to 0.938. In addition, excellent combustion efficiency was observed when the combustion chamber had a large number of injectors at the same momentum-flux ratio.

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Kim, Do-Hun, Jeung-Hwan Shin, In-Chul Lee e Ja-Ye Koo. "Atomizing Characteristics of Coaxial Porous Injectors". Journal of ILASS-Korea 17, n.º 1 (30 de março de 2012): 35–44. http://dx.doi.org/10.15435/jilasskr.2012.17.1.035.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Anand, Rahul, PR Ajayalal, Vikash Kumar, A. Salih e K. Nandakumar. "Spray and atomization characteristics of gas-centered swirl coaxial injectors". International Journal of Spray and Combustion Dynamics 9, n.º 2 (5 de agosto de 2016): 127–40. http://dx.doi.org/10.1177/1756827716660225.

Texto completo da fonte

Resumo:

To achieve uniform and efficient combustion in a rocket engine, a fine uniform spray is needed. The same is achieved by designing an injector with good atomization characteristics. Gas-centered swirl coaxial (GCSC) injector elements have been preferred recently in liquid rocket engines because of an inherent capability to dampen the pressure oscillations in the thrust chamber. The gas-centered swirl coaxial injector chosen for this study is proposed to be used in a semi-cryogenic rocket engine operating with oxidizer rich hot exhaust gases from the pre-burner and liquid kerosene as fuel. In this paper, nine different configurations of gas-centered swirl coaxial injector, sorted out by studying the spray angle and coefficient of discharge with swirl number varying from 9 to 20 and recess ratio of 0.5, 1, and 1.5 are investigated for their atomization characteristics. Spray uniformity, spray cone angle, and droplet size in terms of Sauter mean diameter and mass median diameter are studied at various momentum flux ratios for all configurations. Sauter mean diameter is almost independent of recess ratio, whereas cone angle was inversely proportional to the recess ratio. A finer atomization was observed for injectors of high swirl number but the pressure drop also increased to achieve the same flow rate. An injector of medium swirl number and recess ratio of 1.5 is deemed most fit for above-mentioned application.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Lee, Jungho, Ingyu Lee, Seongphil Woo, Yeoungmin Han e Youngbin Yoon. "Experimental Study of Spray and Combustion Characteristics in Gas-Centered Swirl Coaxial Injectors: Influence of Recess Ratio and Gas Swirl". Aerospace 11, n.º 3 (8 de março de 2024): 209. http://dx.doi.org/10.3390/aerospace11030209.

Texto completo da fonte

Resumo:

The spray and combustion characteristics of a gas-centered swirl coaxial (GCSC) injector used in oxidizer-rich staged combustion cycle engines were analyzed. The study focused on varying the recess ratio, presence of gas swirl, and swirl direction to improve injector performance. The impact of the recess ratio was assessed by increasing it for gas jet-type injectors with varying momentum ratios. Gas-swirl effects were studied by comparing injectors with and without swirl against a baseline of a low recess ratio gas injection. In atmospheric pressure-spray experiments, injector performance was assessed using backlight photography, cross-sectional imaging with a structured laser illumination planar imaging technique (SLIPI), and droplet analysis using ParticleMaster. Increasing the recess ratio led to reduced spray angle and droplet size, and trends of gas swirl-type injectors were similar to those of high recess ratio gas jet-type injectors. Combustion tests involved fabricating combustion chamber heads equipped with identical injectors, varying only the injector type. Oxidizer-rich combustion gas, produced by a pre-burner, and kerosene served as propellants. Combustion characteristics, including characteristic velocity, combustion efficiency, and heat flux, were evaluated. Elevated recess ratios correlated with increased characteristic velocity and reduced differences in the momentum–flux ratios of injectors. However, increasing the recess ratio yielded diminishing returns on combustion efficiency enhancement beyond a certain threshold. Gas swirling did not augment characteristic velocity but notably influenced heat flux distribution. The trends observed in spray tests were related to combustion characteristics regarding heat flux and combustion efficiency. Additionally, it was possible to estimate changes in the location and shape of the flame according to the characteristics of the injector.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Sivakumar, D., e B. N. Raghunandan. "Jet Interaction in Liquid-Liquid Coaxial Injectors". Journal of Fluids Engineering 118, n.º 2 (1 de junho de 1996): 329–34. http://dx.doi.org/10.1115/1.2817381.

Texto completo da fonte

Resumo:

Interaction between two conical sheets of liquid formed by a coaxial swirl injector has been studied using water in the annular orifice and potassium permanganate solution in the inner orifice. Experiments using photographic techniques have been conducted to study the influence of the inner jet on outer conical sheet spray characteristics such as spray cone angle and break-up length. The core spray has a strong influence on the outer sheet when the pressure drop in the latter is low. This is attributed to the pressure variations caused by ejector effects. This paper also discusses the merging and separation behavior of the liquid sheets which exhibits hysteresis effect while injector pressure drop is varied.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

Woo, Seongphil, Jungho Lee, Ingyu Lee, Seunghan Kim, Yeoungmin Han e Youngbin Yoon. "Analyzing Combustion Efficiency According to Spray Characteristics of Gas-Centered Swirl-Coaxial Injector". Aerospace 10, n.º 3 (10 de março de 2023): 274. http://dx.doi.org/10.3390/aerospace10030274.

Texto completo da fonte

Resumo:

The momentum flux ratio (MFR) significantly affects the mixing characteristics and combustion efficiency of propellants in rocket engine injectors. The spray characteristics of three gas-centered swirl-coaxial injectors used in a full-scale combustion test were investigated according to the change in the momentum flux ratio. The difference in combustion efficiency was analyzed through the comparison with combustion test results using spray visualization and quantification. The spray cross-sectional shape and droplet distribution were measured using a structured laser illumination planar imaging technique. As the swirl effect was more apparent at a low MFR, the flow rate of the liquid that was sprayed outside was high. The flow rate of the liquid sprayed around the gas injection increased with the MFR. The Sauter mean diameter (SMD) of each injector liquid spray was obtained using the laser shadow imaging method. The SMD decreased as the MFR of all injector types increased, and the injector with a high liquid flow rate and small SMD injected towards the gas center exhibited higher combustion efficiency than the injector with a dominant liquid spray and the large SMD at a large injection angle. The outcomes of the study could help contribute to the increase in the combustion efficiency of the full-scale staged combustion cycle engine combustor.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Ahn, Kyubok, Seonghyeon Seo e Hwan-Seok Choi. "Fuel-Rich Combustion Characteristics of Biswirl Coaxial Injectors". Journal of Propulsion and Power 27, n.º 4 (julho de 2011): 864–72. http://dx.doi.org/10.2514/1.b34121.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

So, Younseok, Yeoungmin Han e Sejin Kwon. "Combustion Characteristics of Multi-Element Swirl Coaxial Jet Injectors under Varying Momentum Ratios". Energies 14, n.º 13 (5 de julho de 2021): 4064. http://dx.doi.org/10.3390/en14134064.

Texto completo da fonte

Resumo:

The combustion characteristics of a staged combustion cycle engine with an oxidizer-rich preburner were experimentally studied at different momentum ratios of multi-element injectors. Propellants were simultaneously supplied as a liquid–liquid–liquid system, and an injector was designed in which a swirl coaxial jet is sprayed. The injector burned the propellants in the inner chamber which had a temperature greater than 2000 K. To cool the combustion gas, a liquid oxidizer was supplied to the cooling channel outside the injector. To prevent the turbine blades from melting, the temperature of the combustion gas was maintained below 700 K. To confirm the combustion characteristics at different momentum ratios of the high-temperature combustion gas inside the injector and the low-temperature liquid oxidizer outside the injector, three types of injectors were designed and manufactured with different momentum ratios: MR 3.0, MR 3.3, and MR 3.7. In this study, the results of the combustion test for each type were compared for 30 s. For ORPB-A, a combustion pressure of 18.5 MPaA, fuel mass flow rate of 0.26 kg/s, oxidizer mass flow rate of 15.3 kg/s, and turbine inlet temperature of 686 K were obtained in the combustion stability period of 29.0–29.5 s. The combustion efficiency was 98% for MR 3.0 (ORPB-A), which was superior to that for other momentum ratios. In addition, during the combustion test for MR 3.0, the fluctuations in the characteristic velocity, combustion pressure, and propellant mass flow rate were low, indicating that combustion was stable. The three types of combustion instability were all less than 0.8%, thus confirming that the combustion stability was excellent.

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

Wataru, Miyagi, Miki Takahiro, Matsuoka Tsuneyoshi e Noda Susumu. "1112 CHARACTERISTICS OF H2/AIR ANNULAR JET FLAMES USING MULTIPLE SHEAR COAXIAL INJECTORS". Proceedings of the International Conference on Jets, Wakes and Separated Flows (ICJWSF) 2013.4 (2013): _1112–1_—_1112–5_. http://dx.doi.org/10.1299/jsmeicjwsf.2013.4._1112-1_.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Gao, Dekun, Jianxiu Qin e Huiqiang Zhang. "Investigation on Acoustic Properties of Thruster Chamber with Coaxial Injectors and Plenum Chamber". International Journal of Aerospace Engineering 2020 (25 de setembro de 2020): 1–12. http://dx.doi.org/10.1155/2020/9672358.

Texto completo da fonte

Resumo:

Based on the URANS equation, a numerical simulation is carried out for acoustic properties of the thruster chamber with coaxial injectors and plenum chamber in a liquid rocket engine. Pressure oscillations with multiacoustic modes are successfully excited in the chamber by using the constant volume bomb method. FFT analysis is applied to obtain the acoustic properties of eigenfrequencies, power amplitudes, and damping rates for each excited acoustic mode. Compared with the acoustic properties in the model chamber with and without an injector as well as with and without the plenum chamber, it can be found that the injector with one open end and one half-open end still can work as a quarter-wave resonator. The power amplitudes of the acoustic mode can be suppressed significantly when its eigenfrequency is close to the tuning frequency of the injector, which is achieved by Cutting down the pressure Peak and Raising up the pressure Trough (CPRT). Compared with the acoustic properties in the model chamber with and without the plenum chamber, it can be found that 1L acoustic pressure oscillation is inhibited completely by the plenum chamber and other acoustic pressure oscillations are also suppressed in a different extent. The injector and plenum chamber have a little effect on the eigenfrequencies and damping rate of each acoustic mode. For multimode pressure oscillation, it is better for tuning frequency of the injector closing to the lower eigenfrequency acoustic mode, which will be effective for suppression of these multiacoustic modes simultaneously.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Kim, Byoung-Do, e Stephen D. Heister. "Two-Phase Modeling of Hydrodynamic Instabilities in Coaxial Injectors". Journal of Propulsion and Power 20, n.º 3 (maio de 2004): 468–79. http://dx.doi.org/10.2514/1.10378.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Seol, J. H., P. G. Han, W. H. Jeong e Y. Yoon. "Recess Effects on Spray Characteristics of Swirl Coaxial Injectors". International Journal of Aeronautical and Space Sciences 4, n.º 1 (30 de maio de 2003): 26–33. http://dx.doi.org/10.5139/ijass.2003.4.1.026.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Bak, Sujin, Donghyun Hwang, Kyubok Ahn e Youngbin Yoon. "Effects of Injector Recess and Combustion Chamber Length on Combustion Stability of Swirl Coaxial Injectors". Journal of the Korean Society of Propulsion Engineers 24, n.º 1 (1 de fevereiro de 2020): 24–33. http://dx.doi.org/10.6108/kspe.2020.24.1.024.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

Ahn, Kyubok, e Hwan-Seok Choi. "Combustion Dynamics of Swirl Coaxial Injectors in Fuel-Rich Combustion". Journal of Propulsion and Power 28, n.º 6 (novembro de 2012): 1359–67. http://dx.doi.org/10.2514/1.b34448.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Park, Tae-Seon. "RANS-LES Simulations of Scalar Mixing in Recessed Coaxial Injectors". Journal of the Korean Society of Propulsion Engineers 16, n.º 1 (1 de fevereiro de 2012): 55–63. http://dx.doi.org/10.6108/kspe.2012.16.1.055.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Ramamurthi, K., e T. John Tharakan. "Experimental study of liquid sheets formed in coaxial swirl injectors". Journal of Propulsion and Power 11, n.º 6 (novembro de 1995): 1103–9. http://dx.doi.org/10.2514/3.23947.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Puissant, C., e M. J. Glogowski. "EXPERIMENTAL CHARACTERIZATION OF SHEAR COAXIAL INJECTORS USING LIQUID/GASEOUS NITROGEN". Atomization and Sprays 7, n.º 5 (1997): 467–78. http://dx.doi.org/10.1615/atomizspr.v7.i5.20.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Hashimoto, T. "Combustion stability of a vitiated-air heater using coaxial injectors". Energy Conversion and Management 38, n.º 10-13 (julho de 1997): 1083–92. http://dx.doi.org/10.1016/s0196-8904(96)00138-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Lim, Byung-Jik, Seonghyeon Seo, Munki Kim, Kyubok Ahn, Jong-Gyu Kim e Hwan-Seok Choi. "Combustion characteristics of swirl coaxial injectors at kerosene-rich conditions". Fuel 106 (abril de 2013): 639–45. http://dx.doi.org/10.1016/j.fuel.2012.10.078.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Ahn, Kyubok, Yeoung-Min Han, Seonghyeon Seo e Hwan-Seok Choi. "Effects of Injector Recess and Chamber Pressure on Combustion Characteristics of Liquid–Liquid Swirl Coaxial Injectors". Combustion Science and Technology 183, n.º 3 (22 de dezembro de 2010): 252–70. http://dx.doi.org/10.1080/00102202.2010.516289.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Ahn, K., e B. J. Lee. "Experimental Study on the Discharge Coefficient of Bi-Swirl Coaxial Injectors". Journal of Applied Fluid Mechanics 12, n.º 5 (1 de setembro de 2019): 1439–47. http://dx.doi.org/10.29252/jafm.12.05.29533.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Liu, Luhao, Qingfei Fu e Lijun Yang. "Theoretical Atomization Model of Liquid Sheet Generated by Coaxial Swirl Injectors". International Journal of Multiphase Flow 142 (setembro de 2021): 103725. http://dx.doi.org/10.1016/j.ijmultiphaseflow.2021.103725.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Strakey, P. A., D. G. Talley e J. J. Hutt. "Mixing Characteristics of Coaxial Injectors at High Gas/Liquid Momentum Ratios". Journal of Propulsion and Power 17, n.º 2 (março de 2001): 402–10. http://dx.doi.org/10.2514/2.5756.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

AHN, Kyubok, Byoungjik LIM e Hwan-Seok CHOI. "Stability Characteristics of Bi-swirl Coaxial Injectors in Fuel-rich Combustion". TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES 57, n.º 6 (2014): 317–24. http://dx.doi.org/10.2322/tjsass.57.317.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Son, Jinwoo, Chae Hoon Sohn, Gujeong Park e Youngbin Yoon. "Spray Patterns and Injection Characteristics of Gas-Centered Swirl Coaxial Injectors". Journal of Aerospace Engineering 30, n.º 5 (setembro de 2017): 04017035. http://dx.doi.org/10.1061/(asce)as.1943-5525.0000745.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Ahn, Kyubok, Yeoung-Min Han e Hwan-Seok Choi. "Effects of Recess Length on Discharge Coefficients of Swirl Coaxial Injectors". Combustion Science and Technology 184, n.º 3 (março de 2012): 323–36. http://dx.doi.org/10.1080/00102202.2011.635615.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Dai, Jian, GuoBiao Cai, Yang Zhang e NanJia Yu. "Experimental investigations of coaxial injectors in a laboratory-scale rocket combustor". Aerospace Science and Technology 59 (dezembro de 2016): 41–51. http://dx.doi.org/10.1016/j.ast.2016.10.013.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Martin, Jan, Michael Börner, Justin Hardi, Dmitry Suslov e Michael Oschwald. "Experimental Investigation of Flame Anchoring Behavior in a LOX/LNG Rocket Combustor". Aerospace 10, n.º 6 (6 de junho de 2023): 542. http://dx.doi.org/10.3390/aerospace10060542.

Texto completo da fonte

Resumo:

Hot fire tests of a multi-injector research combustor were performed with liquid-oxygen and liquefied-natural-gas (LOX/LNG) propellants at chamber pressures from 30 up to 67 bar, hence at conditions similar to an upper stage rocket engine. Within these tests shear coaxial injectors were tested with and without a recessed LOX post. In both configurations, operating conditions with flames anchored at the LOX post tip and thus, if available, pre-combustion in the recess volume as well as lifted flames were observed. Flame anchoring was indirectly detected via acoustic measurements, using mean speed of sound to indicate the presence of flame in the head end of the combustion chamber. While the injector without recess showed only stable combustion irrespective of the flame anchoring behavior, the recessed injector featured short-lived bursts of oscillatory combustion and sustained combustion instabilities. Analysis of the test data showed that stable flame anchoring could not be ensured at momentum flux ratios below 20 for a non-recessed and below 45 for a recessed injector.

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Wang, Xiaowei, Gouzhou Zhang, Guobiao Cai e Hongfa Huo. "Pressure and Geometry Scaling of Gaseous Hydrogen/Gaseous Oxygen Shear-Coaxial Injectors". Journal of Propulsion and Power 28, n.º 6 (novembro de 2012): 1368–78. http://dx.doi.org/10.2514/1.b34508.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Yang, Li-Jun, e Qing-Fei Fu. "Stability of Confined Gas-Liquid Shear Flows in Recessed Shear Coaxial Injectors". Journal of Propulsion and Power 28, n.º 6 (novembro de 2012): 1413–24. http://dx.doi.org/10.2514/1.b34560.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Yoon, W., e K. Ahn. "Experimental and Theoretical Study on Spray Angles of Bi-Swirl Coaxial Injectors". Journal of Applied Fluid Mechanics 11, n.º 5 (1 de setembro de 2018): 1377–86. http://dx.doi.org/10.29252/jafm.11.05.28814.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Bai, Xiao, Pengjin Cao, Qinglian Li e Peng Cheng. "The break phenomenon of self-pulsation for liquid-centered swirl coaxial injectors". International Journal of Multiphase Flow 142 (setembro de 2021): 103708. http://dx.doi.org/10.1016/j.ijmultiphaseflow.2021.103708.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Ahn, Jonghyeon, Ha Young Lim e Kyubok Ahn. "Spray Characteristics of Additive Manufactured Swirl Coaxial Injectors with Different Recess Lengths". Journal of the Korean Society of Propulsion Engineers 26, n.º 1 (28 de fevereiro de 2022): 47–59. http://dx.doi.org/10.6108/kspe.2022.26.1.047.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Park, Gujeong, Jungho Lee, Ingyu Lee e Youngbin Yoon. "Spray Characteristics of Gas-Centered Swirl Coaxial Injectors according to Injection Conditions". Journal of ILASS-Korea 19, n.º 4 (31 de dezembro de 2014): 167–73. http://dx.doi.org/10.15435/jilasskr.2014.19.4.167.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Hautman, Donald J. "SPRAY CHARACTERIZATION OF LIQUID/GAS COAXIAL INJECTORS WITH THE CENTER LIQUID SWIRLED". Atomization and Sprays 3, n.º 4 (1993): 373–87. http://dx.doi.org/10.1615/atomizspr.v3.i4.20.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Song, Jiawen, e Bing Sun. "Coupled heat transfer analysis of thrust chambers with recessed shear coaxial injectors". Acta Astronautica 132 (março de 2017): 150–60. http://dx.doi.org/10.1016/j.actaastro.2016.12.026.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

MIYAGI, Wataru, Takahiro MIKI, Tsuneyoshi MATSUOKA e Susumu NODA. "Characteristics of H2/air annular jet flames using multiple shear coaxial injectors". Journal of Fluid Science and Technology 9, n.º 3 (2014): JFST0039. http://dx.doi.org/10.1299/jfst.2014jfst0039.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Marragou, S., H. Magnes, A. Aniello, T. F. Guiberti, L. Selle, T. Poinsot e T. Schuller. "Modeling of h2/air flame stabilization regime above coaxial dual swirl injectors". Combustion and Flame 255 (setembro de 2023): 112908. http://dx.doi.org/10.1016/j.combustflame.2023.112908.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Mosolov, S. V., e D. A. Sidlerov. "Investigating the Specifics of Work Cycle Evolution in the Combustion Chamber of an Oxygen/Kerosene Liquid Rocket Engine". Herald of the Bauman Moscow State Technical University. Series Mechanical Engineering, n.º 2 (125) (abril de 2019): 34–46. http://dx.doi.org/10.18698/0236-3941-2019-2-34-46.

Texto completo da fonte

Resumo:

The paper considers the specifics of gasification, mixing and burnout processes for propellant components in a combustion chamber featuring coaxial bicentrifugal injectors and operating in the liquid/liquid mode employing oxygen and the T-1 and T-6 kerosene types. Numerical simulation revealed that when using the T6 fuel, the structure of recirculation zones appearing in the leading region of the combustion chamber may provide more efficient oxygen and kerosene mixing and burnout as compared to a chamber running on the T-1 fuel

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Jeong, Gijeong, Yeseung Lee, Juntae Yoon, Hyeontaek Jo e Youngbin Yoon. "ATOMIZATION AND DISTRIBUTION OF DROPLETS IN GAS-LIQUID SPRAYS BY COAXIAL SWIRL INJECTORS". Atomization and Sprays 30, n.º 8 (2020): 607–26. http://dx.doi.org/10.1615/atomizspr.2020033825.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

Kim, Dongjun, Poonggyoo Han, Ji-Hyuk Im, Youngbin Yoon e Vladimir G. Bazarov. "Effect of Recess on the Spray Characteristics of Liquid-Liquid Swirl Coaxial Injectors". Journal of Propulsion and Power 23, n.º 6 (novembro de 2007): 1194–203. http://dx.doi.org/10.2514/1.30450.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

SEO, Seonghyeon, Yeoung-Min HAN e Hwan-Seok CHOI. "Combustion Characteristics of Bi-Liquid Swirl Coaxial Injectors with Respect to a Recess". TRANSACTIONS OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES 53, n.º 179 (2010): 24–31. http://dx.doi.org/10.2322/tjsass.53.24.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Bai, Xiao, Peng Cheng, Liyong Sheng, Qinglian Li, Xinqiao Zhang e Zhongtao Kang. "Effects of backpressure on self-pulsation characteristics of liquid-centered swirl coaxial injectors". International Journal of Multiphase Flow 116 (julho de 2019): 239–49. http://dx.doi.org/10.1016/j.ijmultiphaseflow.2019.04.017.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Wang, Xingjian, Liwei Zhang, Yixing Li, Shiang-Ting Yeh e Vigor Yang. "Supercritical combustion of gas-centered liquid-swirl coaxial injectors for staged-combustion engines". Combustion and Flame 197 (novembro de 2018): 204–14. http://dx.doi.org/10.1016/j.combustflame.2018.07.018.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Zhang, Liwei, Xingjian Wang, Yixing Li, Shiang-Ting Yeh e Vigor Yang. "Supercritical fluid flow dynamics and mixing in gas-centered liquid-swirl coaxial injectors". Physics of Fluids 30, n.º 7 (julho de 2018): 075106. http://dx.doi.org/10.1063/1.5026786.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

Cao, Pengjin, Peng Cheng, Xiao Bai, Qinglian Li e Chengchao Cui. "Effects of recess ratio on combustion characteristics of LOX/methane swirl coaxial injectors". Fuel 337 (abril de 2023): 127205. http://dx.doi.org/10.1016/j.fuel.2022.127205.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Kumar, Abhijeet, e Srikrishna Sahu. "Influence of nozzle geometry on primary and large-scale instabilities in coaxial injectors". Chemical Engineering Science 221 (agosto de 2020): 115694. http://dx.doi.org/10.1016/j.ces.2020.115694.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Parra, Teresa, David Pastor, Ruben Pérez e José Molina. "Numerical Modelling of Swirl-Stabilized Turbulent Lean Non-Premixed Flames". Advanced Engineering Forum 29 (agosto de 2018): 62–66. http://dx.doi.org/10.4028/www.scientific.net/aef.29.62.

Texto completo da fonte

Resumo:

Numerical simulations have been performed to analyze the interaction of confined coaxial high-swirl jets in both cases: isothermal and reactive flows. Besides different setups of swirl injectors have been tested to study the influence of swirl in the flames for both stoichiometric and lean mixtures. The aim was to quantify the nitrogen oxide emissions as well as the flow pattern for different swirling annular air jet and non-swirling inner fuel jet. This simple setup is widely used in burners to promote stabilized flames of lean mixtures producing ultra low NOx emissions.

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Ficuciello, A., F. Baillot, JB Blaisot, C. Richard e M. Théron. "Acoustic response of an injection system to high-frequency transverse acoustic fields". International Journal of Spray and Combustion Dynamics 9, n.º 4 (11 de outubro de 2017): 217–29. http://dx.doi.org/10.1177/1756827717735300.

Texto completo da fonte

Resumo:

The acoustic coupling between the injection system and the acoustic fluctuations in liquid rocket engine combustion chambers is an important issue in the understanding of the thermo-acoustic instability phenomenon. This paper presents the results of a wide-ranging parametric investigation of the acoustic response of a two-phase injection system submitted to a forced high-amplitude transverse acoustic field. Two domes, one for the gas and one for the liquid, were expressly designed to feed three identical coaxial injectors. The internal mode shapes of the domes were characterized by measuring pressure signals at different locations in the domes. Experimental mode shapes showed good agreement with those predicted by numerical simulations. Acoustic pressure amplitudes up to 23% of those induced in the main cavity can be found in both the gas and liquid domes. The response efficiency in a dome depends on the position of the injectors’ exit in the acoustic field.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!