Literatura científica selecionada sobre o tema "Circuit Intégrés"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Circuit Intégrés".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Circuit Intégrés"
Tap, H., R. P. Tan, O. Bernal, P.-F. Calmon, C. Rouabhi, C. Capello, P. Bourdeu d'Aguerre, F. Gessinn e M. Respaud. "De la conception à la fabrication de circuits intégrés en technologie CMOS". J3eA 18 (2019): 1019. http://dx.doi.org/10.1051/j3ea/20191019.
Texto completo da fonteLincelles, JB, V. Goiffon e M. Respauda. "Apprentissage de la conception de circuits intégrés : une introduction par la technologie à l’aide d’un logiciel de TCAD". J3eA 21 (2022): 1010. http://dx.doi.org/10.1051/j3ea/20221010.
Texto completo da fonteMarris-Morini, Delphine, Carlos Alonso-Ramos, Xavier Le Roux e Laurent Vivien. "La photonique silicium / germanium pour la spectroscopie moyen infrarouge". Photoniques, n.º 98 (setembro de 2019): 20–23. http://dx.doi.org/10.1051/photon/20199820.
Texto completo da fonteVivien, Laurent, Delphine Marris-Morini, Eric Cassan, Carlos Alonso-Ramos, Charles Baudot, Frédéric Bœuf e Bertrand Szelag. "Circuits intégrés photoniques silicium". Photoniques, n.º 93 (setembro de 2018): 18–22. http://dx.doi.org/10.1051/photon/20189318.
Texto completo da fonte-CATANI, Jean-Pierre. "La CEM dans les circuits intégrés". Revue de l'Electricité et de l'Electronique -, n.º 07 (2000): 30. http://dx.doi.org/10.3845/ree.2000.065.
Texto completo da fonteChapron, Claude, e Simon Elrharbi. "Circuit multiprojet pour la conception de circuit intégré bipolaire". Annales Des Télécommunications 46, n.º 9-10 (setembro de 1991): 550–52. http://dx.doi.org/10.1007/bf02998698.
Texto completo da fonte-LUBINEAU, M. "Vers un modèle CEM des circuits intégrés". Revue de l'Electricité et de l'Electronique -, n.º 07 (2000): 44. http://dx.doi.org/10.3845/ree.2000.068.
Texto completo da fonteTrojman, L., F. Viteri e E. Sicard. "Pédagogie hybride pour l’apprentissage de la conception d’un microprocesseur simplifié niveau master avec μWind". J3eA 21 (2022): 1005. http://dx.doi.org/10.1051/j3ea/20221005.
Texto completo da fonteTourneur, Gilles, Pierre Leray, Michel Mathieu, Bernard Loriferne e Claude Chapron. "Initiation pratique à la fabrication de circuits intégrés". Annales Des Télécommunications 46, n.º 9-10 (setembro de 1991): 542–46. http://dx.doi.org/10.1007/bf02998696.
Texto completo da fonteFournier, Jean-Michel, e Yves-Jacques Vernay. "Le diagnostic des circuits intégrés par faisceau d’électrons". Annales des Télécommunications 43, n.º 7-8 (julho de 1988): 443–59. http://dx.doi.org/10.1007/bf02999714.
Texto completo da fonteTeses / dissertações sobre o assunto "Circuit Intégrés"
Archambeau, Éric. "Test fonctionnel des circuits intégrés digitaux". Grenoble INPG, 1985. http://tel.archives-ouvertes.fr/tel-00316164.
Texto completo da fontePalmier, Luc. "Conception fonctionnelle de circuits intégrés de traitement d'image". Paris 11, 1985. http://www.theses.fr/1985PA112246.
Texto completo da fonteThis work is concerned with a functional approach to image processing integrated circuit design. Aiming to adjust dynamically some processing features to enable various enough types of operators and to adapt them to the given data, the chips are supposed to be easily associated using predetermined criteria for slicing and cascading. This, different possibilities of integration and several examples of specialized circuits are analysed. The definition, the effective integration and the test of three elementary image processing functions are described. An attempt of generalization towards the “functional” conception of chips and its future prospects are presented as a conclusion
Chotin, Eric. "Placement automatique de circuits intégrés". Phd thesis, Grenoble INPG, 1992. http://tel.archives-ouvertes.fr/tel-00341773.
Texto completo da fonteDeyine, Amjad. "Contribution au développement de techniques de stimulation laser dynamique pour la localisation de défauts dans les circuits VLSI". Thesis, Bordeaux 1, 2011. http://www.theses.fr/2011BOR14252/document.
Texto completo da fonteThe principal objective of the project is to investigate laser based techniques for failure analysis of VLSI integrated circuits. The investigations will be performed on the DCGSystems’ Meridian laser scanning microscope coupled with the Credence’s Diamond D10 tester available at CNES. This study was interested more specifically in the improvement of dynamic laser stimulation techniques said DLS like Dynamic Laser Stimulation. DLS techniques consists in modifying the operation of a dynamically failing integrated circuit by photoelectric effect or photothermal effect using a continuous laser beam sweeping the surface of the circuit. A laser beam modulated in the nanosecond range synchronously with the electrical test through a TTL signal can also be advantageously used. Analysis of the electrical parameters response to the laser disturbance leads to an identification of the dynamic failure origin. The optimization of current DLS techniques will increase the failure analyses success rate and bring information hardly accessible by other means, which allows determining the failure root cause. The work performed was the improvement of the DLS process flow by closely integrating the test to monitor any relevant electrical parameters upon DLS. The « Pass-Fail Mapping » technique and the parametric techniques were implemented on the test tools combining the D10 and the Meridian. The synchronization of the test with the laser scan allows establishing methodologies and techniques in order to add timing information to the defect localisation. Indeed, by modulating the laser beam depending on the test pattern sequences, we show our capability to identify precisely which are the vectors responsible for the IC defective behaviour. We are able now to correlate the defective IC functions with the IC structures involved. This technique is known as F-DLS for Full Dynamic Laser Stimulation.In some cases, we know when the failure occurs in the test pattern but we ignore which IC structures are involved. So, we also developed a dynamic current measurement under laser stimulation technique. This technique proved to be efficient to obtain information about the internal IC behaviour. As an example, for the latched component which signals are synchronised just before the outputs, it is hard to measure shift in the signal propagation. Nevertheless, the IC internal activities can be characterized by monitoring on a scope the current variations under laser stimulation when the IC is activated. The information about the shift in the signal propagation could be extracted then by observing of the IC internal activities.Finally, these DLS techniques proved their efficiency for device qualification for reliability issues. Their accuracy allows early detection of operational parameter tiny variations. This is used to highlight electrical parameter margin evolutions during accelerated aging process. DLS techniques demonstrate their potential to deal with the IC robustness evolution facing external perturbation for reliability purposes.The techniques and methodologies developed during this work have been successfully integrated in the IC analysis and characterisation process in the laboratory. We exposed these techniques but the main case studies remain confidential
Morin, Vincent. "Sybilin : un logiciel de conception symbolique pour circuits intégrés micro-ondes". Brest, 1988. http://www.theses.fr/1988BRES2025.
Texto completo da fonteAboudou, Abderraouf. "Application de la photodétection dans les circuits intégrés III-V pour le contrôle optique d'un circuit logique". Lille 1, 1991. http://www.theses.fr/1991LIL10053.
Texto completo da fonteCette étude préliminaire nous a permis de réaliser un deuxième diviseur où cette fois-ci l'emplacement et la structure géométrique du photoconducteur ont été optimisés, de sorte que la division par deux a pu être effectuée jusqu'à 1. 2GHz avec une puissance optique modulée minimale de l'ordre de 500 nW seulement. Dans le quatrième chapitre, nous remplaçons dans le circuit intégré, le photoconducteur par un MSM GaAlAs/GaAs/GaAs de structure géométrique semblable. Ici aussi la division par deux est effectuée jusqu'à 1. 2 GHz avec le même seuil de puissance optique. L'un des enseignements que l'on peut tirer de cette étude est le comportement quasi-identique des deux photodétecteurs en hautes fréquences. Dans le cinquième chapitre, nous démontrons expérimentalement, après l'avoir valider théoriquement, la faisabilité d'un MSM GaAs intégré monolithiquement à un guide optique diélectrique Si3N4/SiO2. Les résultats obtenus sont très encourageants et laissent envisager la possibilité de réaliser un circuit numérique commandé optiquement et dont la distribution du signal optique s'effectue à l'aide de guides diélectriques
Angui, Ettiboua. "Conception d'un circuit intégré VLSI turbo-décodeur". Brest, 1994. http://www.theses.fr/1994BRES2005.
Texto completo da fonteTran, Duc Anh. "Architecture hybride tolérante aux fautes pour l'amélioration de la robustesse des circuits et systèmes intégrés numériques". Thesis, Montpellier 2, 2012. http://www.theses.fr/2012MON20132/document.
Texto completo da fonteEvolution of CMOS technology consists in continuous downscaling of transistor features sizes, which allows the production of smaller and cheaper integrated circuits with higher performance and lower power consumption. However, each new CMOS technology node is facing reliability problems due to increasing rate of faults and errors. Consequently, fault-tolerance techniques, which employ redundant resources to guarantee correct operations of digital circuits and systems despite the presence of faults, have become essential in digital design. This thesis studies a novel hybrid fault-tolerant architecture for robustness improvement of digital circuits and systems. It targets all kinds of error in combinational part of logic circuits, i.e. hard, SETs and timing errors. Combining information redundancy for error detection, timing redundancy for transient error correction and hardware redundancy for permanent error corrections, the proposed architecture allows significant power consumption saving, while having similar silicon area compared to existing solutions. Furthermore, it can also be used in other applications, such as dealing with aging phenomenon, tolerating faults in pipeline architecture, and being combined with advanced SEUs protection scheme for sequential parts of logic circuits
Delorme, Nicolas. "Influence des interconnexions sur les performances des circuits intégrés silicium en technologie largement submicronique". Grenoble INPG, 1997. http://www.theses.fr/1997INPG0173.
Texto completo da fonteFontaine, Jonathan. "Optimisation de l’insertion de contre-mesures pour la sécurité des circuits intégrés". Electronic Thesis or Diss., Sorbonne université, 2024. http://www.theses.fr/2024SORUS058.
Texto completo da fonteOver the last 75 years, the electronics industry has experienced a spectacular evolution, moving from manual design to an automated industry. This industrialization has led to increased complexity in circuits, requiring specialization in tasks during the design of electronic circuits. Various companies around the world have emerged to perform these tasks, with varying levels of trust assigned. From a designer's perspective, these actors pose several threats, such as the insertion of malicious functionalities, intellectual property theft, or circuit counterfeiting. These threats impact the economy of the semiconductor industry, amounting to billions of dollars in losses annually.One way to combat these threats is to lock the circuit with a key, preventing it from functioning correctly if the right key is not present. Logic locking is a method that involves logically locking a circuit using key gates and the corresponding digital key. Several implementations of logic locking have been developed. In these works, we focus on Strong Logic Locking. It locks the circuit by connecting XOR/XNOR gates to the digital key, inserted in circuit signals. Each insertion position has a different impact on security, which is the possibility of recovering the digital key. However, adding logic gates in a circuit increases power consumption, the circuit's area, and decreases performance. Strong logic locking aims to maximize the security of the lock by identifying positions that enhance security, regardless of the resulting impact.In this thesis, we seek to optimize security while considering the impact on circuit performance. We propose a new approach to solving strong logic locking. We start by formulating our security problem based on mathematical models that include security for optimally inserting key gates in the circuit. This formulation calculates the cliques of a subgraph representing the insertion positions. We establish a branch and bound solving algorithm for our problem and evaluate it. We then present a second mathematical models representing the impact on the delay from inserting key gates in the circuit. Finaly, we propose strategies to optimize security while limiting the impact on circuit performance. Our tools are integrated into the design flow, allowing us to validate them with numerical results obtained on circuits used by the electronic community
Livros sobre o assunto "Circuit Intégrés"
Office, Canadian Intellectual Property, e Office de la propriété intellectuelle du Canada., eds. A guide to integrated circuit topographies =: Le guide des topographies de circuits intégrés. Ottawa, Ont: Industry Canada = Industrie Canada, 2005.
Encontre o texto completo da fonteIntegrated circuit quality and reliability. New York: Marcel Dekker, 1987.
Encontre o texto completo da fonteR, Hnatek Eugene. Integrated circuit quality and reliability. 2a ed. New York: M. Dekker, 1995.
Encontre o texto completo da fonteJohns, David. Analog integrated circuit design. New York: John Wiley & Sons, 1997.
Encontre o texto completo da fonteDigital CMOS circuit design. Boston: Kluwer Academic Publishers, 1986.
Encontre o texto completo da fonteAllen, P. E. CMOS analog circuit design. Oxford: Oxford University Press Inc., 1987.
Encontre o texto completo da fonteAllen, P. E. CMOS analog circuit design. 2a ed. New York: Oxford University Press, 2002.
Encontre o texto completo da fonteArts of VLSI circuit design: Symmetry approaches toward zero PVT sensitivity. [U.S.]: Xlibris Corporation, 2011.
Encontre o texto completo da fonteR, Holberg Douglas, ed. CMOS analog circuit design. 3a ed. New York: Oxford University Press, USA, 2011.
Encontre o texto completo da fontePower hybrid circuit design and manufacture. New York: M. Dekker, 1996.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Circuit Intégrés"
Chaponniere, Jean-Raphaël. "Le circuit intégré du sud-est asiatique". In La nouvelle Asie industrielle, 179–85. Graduate Institute Publications, 1989. http://dx.doi.org/10.4000/books.iheid.4092.
Texto completo da fonte