Bibliografias temáticas / CHR 1555

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências

Literatura científica selecionada sobre o tema "CHR 1555"

Autor: Grafiati

Publicado: 29 de julho de 2024

Última modificação: 31 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "CHR 1555".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "CHR 1555"

Szoc, Sara. "Le prime grammatiche d’italiano nei Paesi Bassi (1555-1710) e la descrizione della congiunzione". Recherches, n.º 5 (1 de dezembro de 2010): 77–95. http://dx.doi.org/10.4000/cher.8935.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Li, Jing Fang. "[Rook Review] Lin Yu-feng, The Beginning of the Modern Chinese Press History: Macao Press History 1557-1840". CHUNGGUKSA YONGU (The Journal of Chinese Historical Researches) 111 (31 de dezembro de 2017): 267–71. http://dx.doi.org/10.24161/chr.111.267.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Qiu, Hai Peng, Ming Wei Chen, Jian Jiao, Xu Qian Li, Yu Wang e Shu Ya Gao. "Studies on the Pyrolysis Kinetic Behaviours of Polycarbosilan". Key Engineering Materials 602-603 (março de 2014): 388–92. http://dx.doi.org/10.4028/www.scientific.net/kem.602-603.388.

Texto completo da fonte

Resumo:

The pyrolysis kinetic behaviors and reaction mechanism of polycarbosilane (PCS) were characterized by means of XRD, SEM and on-line TG-DSC-FTIR-MS coupling technique, which showed that the pyrolysis process accorded with the F2 integral model (300-600°C), and the values of apparent activation energy (Ea) and pre-exponential factor (A) were 56.10KJ/mol and 10.84, respectively. During the pyrolysis process, PCS was converted into amorphous inorganic solid from organic polymer with breakage and rearrangement of chemical bonds, then to well-defined crystal structure of good thermal stability. Furthermore, the weight loss occurred mainly among 300°C and 800°C with CH4, (CH3)4Si,(CH3)3SiH,(CH3)2SiH2and other silane gases releasing from pyrolysis product leading to the conversion from organic polymers to inorganic ceramic. The pyrolysis product was converted into β-SiC crystal completely at 1400°C, and the crystallization of α-SiC phase occurred after 1550°C which might influence the stability of SiC matrix. Key words:polycarbosilane, organic precursor, pyrolysis kinetic behavior

Estilos ABNT, Harvard, Vancouver, APA, etc.

Skrzypkowski, Krzysztof. "Programowanie muzyki w radiowych stacjach mainstreamowych (z uwzględnieniem formatu CHR)". Acta Universitatis Lodziensis. Folia Litteraria Polonica 17, n.º 3 (30 de setembro de 2012): 200–202. http://dx.doi.org/10.18778/1505-9057.17.22.

Texto completo da fonte

Resumo:

Autor opisał zagadnienie programowania muzycznego stacji mainstreamowych (w oparciu o format CHR). Zdefiniował najpopularniejsze formaty radiowe, przybliżył ich historię, wspomniał o podstawowych mechanizmach, o których muszą pamiętać wszyscy programiści muzyczni.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sheen, Joo Hyun. "Yang Tingyun's Acceptance of Catholicism and his Initiation of Buru yifo in Late Ming China". CHUNGGUKSA YONGU (The Journal of Chinese Historical Researches) 125 (30 de abril de 2020): 233–63. http://dx.doi.org/10.24161/chr.125.233.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bevington, David. "The Medieval European Stage: 500-1550 (review)". Comparative Drama 36, n.º 3-4 (2002): 445–49. http://dx.doi.org/10.1353/cdr.2002.0024.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Husak, Y. V., O. A. Holichenko, V. V. Zakatov e A. V. Shtemenko. "Interaction of trans-tetrachlorodi-m-carboxylates of dirhenium(III) with dipeptides of the glycyl series". Voprosy Khimii i Khimicheskoi Tekhnologii, n.º 3 (junho de 2022): 21–25. http://dx.doi.org/10.32434/0321-4095-2022-142-3-21-25.

Texto completo da fonte

Resumo:

The paper reports the methods for the synthesis of new cluster compounds of trans-tetrachlorodi--carboxylates of dirhenium(III) with dipeptides of the glycyl series. The compositions and the structures were determined by electron absorption and IR spectroscopies as well as by elemental analysis for the following newly synthesized compounds: trans-[Re2(H3N+–CH2–СO–NH–CH(COO)–CH2–CH(CH3)–CH3)2Cl42СН3CN]Cl2 (І) and trans-[Re2(H3N+–CH2–СO–NH–CH(COO)–CH2–C6H5)2Cl42СН3CN]Cl2 (ІІ). Analysis of the electronic absorption spectra of the solutions of the synthesized substances showed the presence of a doublet pattern (12500 and 16129 сm–1), which corresponds to the *-electronic transition of the Re–Re quadruple bond characteristic of solutions of trans-tetrachlorodi--carboxylates of dirhenium(III). The appearance of oscillations at 1485 сm–1 for І and 1486 сm–1 for ІІ, characteristic of the s(CO) of the coordinated carboxylate group, was detected on the IR spectra, which indicates the bridging coordination of this group to the Re26+ binuclear fragment. The protonation of the amino group is indicated by the appearance of a wide band of valence oscillations (NH3+) in the range of 3400–3350 сm–1 and deformation oscillations (NH3+) at 1557 сm–1 and 1614 сm–1 for I and II, respectively. The stability of the obtained complex compounds in aqueous solutions was determined. It was shown that the hydrolysis of the synthesized substances takes place in 4–5 days, which is accompanied by a decrease in the pH of the reaction solution.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Salazar de Pablo, Gonzalo, Scott W. Woods, Georgia Drymonitou, Héctor de Diego e Paolo Fusar-Poli. "Prevalence of Individuals at Clinical High-Risk of Psychosis in the General Population and Clinical Samples: Systematic Review and Meta-Analysis". Brain Sciences 11, n.º 11 (20 de novembro de 2021): 1544. http://dx.doi.org/10.3390/brainsci11111544.

Texto completo da fonte

Resumo:

(1) The consistency and magnitude of the prevalence of Clinical High-Risk for Psychosis (CHR-P) individuals are undetermined, limiting efficient detection of cases. We aimed to evaluate the prevalence of CHR-P individuals systematically assessed in the general population or clinical samples. (2) PRISMA/MOOSE-compliant (PROSPERO: CRD42020168672) meta-analysis of multiple databases until 21/01/21: a random-effects model meta-analysis, heterogeneity analysis, publication bias and quality assessment, sensitivity analysis—according to the gold-standard CHR-P and pre-screening instruments—leave-one-study-out analyses, and meta-regressions were conducted. (3) 35 studies were included, with 37,135 individuals tested and 1554 CHR-P individuals identified (median age = 19.3 years, Interquartile range (IQR) = 15.8–22.1; 52.2% females, IQR = 38.7–64.4). In the general population (k = 13, n = 26,835 individuals evaluated), the prevalence of the CHR-P state was 1.7% (95% Confidence Interval (CI) = 1.0–2.9%). In clinical samples (k = 22, n = 10,300 individuals evaluated), the prevalence of the CHR-P state was 19.2% (95% CI = 12.9–27.7%). Using a pre-screening instrument was associated with false negatives (5.6%, 95% CI = 2.2–13.3%) and a lower CHR-P prevalence (11.5%, 95% CI = 6.2–20.5%) compared to using CHR-P instruments only (28.5%, 95% CI = 23.0–34.7%, p = 0.003). (4) The prevalence of the CHR-P state is low in the general population and ten times higher in clinical samples. The prevalence of CHR-P may increase with a higher proportion of females in the general population and with a younger population in clinical samples. The CHR-P state may be unrecognized in routine clinical practice. These findings can refine detection and preventive strategies.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Uytven, R. van. "C.R. Steen, A chronicle of conflict: Tournai, 1559-1567". BMGN - Low Countries Historical Review 102, n.º 4 (1 de janeiro de 1987): 648. http://dx.doi.org/10.18352/bmgn-lchr.2869.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ribeiro, Beatriz F., Eliana C M Miranda, Marcia T. Delamain, Gislaine Borba Oliveira, Maria Helena Almeida, Vagner O. Duarte, Irene L. Metze, Carmino A. De Souza, Rosana A. Silveira e Katia B. Pagnano. "Treatment Results With Dasatinib Or Nilotinib In Third Line Therapy Of Chronic Myeloid Leukemia After Failure Of Two Tyrosine Kinase Inhibitors". Blood 122, n.º 21 (15 de novembro de 2013): 5189. http://dx.doi.org/10.1182/blood.v122.21.5189.5189.

Texto completo da fonte

Resumo:

Abstract Chronic myeloid leukemia (CML) patients with imatinib failure are usually treated with second generation tyrosine kinase inhibitors (TKI). In case of dasatinib or nilotinib intolerance or resistance patients with HLA matched donor are submitted to allogeneic hematopoietic stem cell transplantation (HSCT) or switch treatment to a different TKI. Aims to evaluate complete hematological response (CHR), cytogenetic and molecular responses, overall, progression free and event free survival (OS, FPS and EFS) in CML patients in third line therapy that previously used 2 TKI. BCR-ABL mutations was also evaluated in this population Patients and methods between July 2008 and August 2012 26 CML patients were evaluated: 10 patients (pts) treated with dasatinib (38,5%) and 16 with nilotinib (61,5%) in third line therapy. OS, PFS and EFS were calculated with Kaplan-Meier method and Log-Rank was used for comparison, from the date of the third TKI start. The events for PFS were progression to accelerated phase (AP) or blast crisis (BC) and death. For EFS, were considered loss of CHR, loss of complete cytogenetic response (CCR), TKI discontinuation for failure or intolerance, progression or death. Patients were censored in HSCT date or TKI discontinuation for cytogenetic and molecular responses evaluation, but not for OS. Mutational analysis was done with Sanger sequencing. Results 13 male (50%) and 13 female patients with median age 54 years (22-75) and median follow-up of 32 months were analyzed (1-59). Previous response to imatinib: only one patient has achieved CCR. Status before third TKI start: 19 (73%) less than partial cytogenetic response (PCyR); 2 (7,7%) PCyR; 4 (15,5%) CCR;and 1 (3,8%) clonal evolution. 8/18 (42%) patients presented the following mutations: F317L (2), E255V (1), Y253H (1), M351T (1), M244V (1) e F359V (2). The median time of the third TKI treatment was 171 days (15-1140). Responses to third line TKI: CHR 17/19 (89%) in CP; 3/3 AF; 0/4 BC; CCR: 3/19 in CP (2 pts at 3 months and one in the 12º month); 1/3 AP; 0/4 BC; MMR: 4/19 in CP; 1/3 AP; 0/4 in BC. Nine lost CHR (45%) (8 in CP and one in AP). At 3 months, 1/21 pts (4.5%) achieved MMR; 2/13 (15%) at 6 months, while at 12 months 1/11 (9%) had MMR. At 3 months 11/21 had a BCR-ABL/ABL(IS) >10% and at 6 months 10/13 >1%. Three patients progressed to advanced phases (11,5%) ; 6 (23%) died (4 due to LMC, 1 acute myocardial infarction and 1 from graft vs host disease after HSCT; one lost follow-up. Third line treatment was discontinued in 12 (46%) pts: 6 for resistance, 2 death; 2 intolerance and resistance; 1 intolerance and one loss of follow-up. OS, PFS and EFS were 69%, 68% e 30% respectively(figure 1). OS was inferior in AP and BC in comparison with CP (0% vs 50% vs 90% - p< 0,0001)(figure 2). In summary responses may be obtained with dasatinib or nilotinib after 2 TKI failure, but they are not durable in advanced phases. Besides the results, that is an alternative for disease stabilization until the identification of a suitable donor or for patients with no performance status for HSCT. Disclosures: No relevant conflicts of interest to declare.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "CHR 1555"

Li, Tingting. "Changes in Char Structure and Reactivity during the Gasification of Low Rank Fuels". Thesis, Curtin University, 2016. http://hdl.handle.net/20.500.11937/1535.

Texto completo da fonte

Resumo:

Gasification-based technologies are at the core of many low emission technologies for the utilisation of low-rank fuels, such as brown coal and sub-bituminous coal. This study focuses on the evolution of char structure and its reactivity during the gasification of low-rank fuels. The kinetic parameters and the volatilisation of inherent metallic species are examined as well to provide further insights into the gasification mechanisms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sartor, Marco <1997&gt. "«Or che la terra di bei fiori è piena». Saggio sui capitoli ternari di Ludovico Ariosto". Master's Degree Thesis, Università Ca' Foscari Venezia, 2019. http://hdl.handle.net/10579/15555.

Texto completo da fonte

Resumo:

Oggetto precipuo di questo studio è l’analisi dei ventisette capitoli ternari che figurano nelle moderne edizioni delle Rime di Ludovico Ariosto. Dopo un breve inquadramento storico-culturale, si traccia lo stato dell’arte dei principali studi critici e filologici sulla produzione lirica dell’umanista. Una nuova scoperta testimoniale è alla base in questo senso di alcune osservazioni di Cesare Bozzetti, dalle quali ha preso avvio – secondo le puntualizzazioni di Zanato e Comboni – un più ampio discorso vòlto a dimostrare l’esistenza di una silloge di componimenti ariosteschi caratterizzata da un impianto macro-testuale. A ciò si accludono alcune considerazioni metriche sulla diffusione della terza rima nel secondo Quattrocento, in ambito emiliano-ferrarese, congiunte a riflessioni sul classicismo dell’Ariosto lirico. Seguono tre capitoli ove si passano in rassegna i componimenti in terza rima d’indole encomiastica, quelli di carattere amoroso selezionati dall’autore per l’allestimento di un suo libro di rime, e quelli giovanili, stilisticamente protesi verso il gusto “tardo-gotico” della lirica cortigiana. Accanto al petrarchismo e alle influenze delle coeve espressioni liriche latine e volgari dei verseggiatori di corte, una direttrice fondamentale dell’indagine è la ricerca di elementi riconducibili a una poetica classicista e umanistica, come gli echi virgiliani, ovidiani e degli erotici ed elegiaci latini, che tanto spazio occuparono nella formazione dell’autore.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lucena, Maur?lio de Medeiros. "Efeito da introdu??o de res?duo de cinza de forno cer?mico em massa para cer?mica estrutural". Universidade Federal do Rio Grande do Norte, 2008. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15556.

Texto completo da fonte

Resumo:

Made available in DSpace on 2014-12-17T14:57:48Z (GMT). No. of bitstreams: 1 MaurilioML.pdf: 1402196 bytes, checksum: 5d957dc60dc4fcde085c9265b4ecfe9b (MD5) Previous issue date: 2008-10-15
The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 ?C, 950 ?C, 1050 ?C and 1150 ?C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 ?C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes
A cer?mica vermelha ou estrutural, como ? conhecida, compreende os materiais cer?micos formados por blocos de veda??es e estruturais, tijolos, telhas, lajotas, manilhas, pisos r?sticos e materiais ornamentais. Sua fabrica??o utiliza mat?rias-primas como argilas e siltes argilosos, com certo teor de impurezas. Possui boa durabilidade e resist?ncia mec?nica ? compress?o, baixo custo, o que a torna um dos principais materiais utilizados na constru??o civil. A incorpora??o de res?duos de diversas atividades industriais em produtos de cer?mica estrutural ? uma alternativa tecnol?gica para reduzir o impacto ambiental causado por sua disposi??o indiscriminada. Esta incorpora??o pode promover a troca qu?mica e a inertiza??o de metais, provenientes do res?duo, por fixa??o na fase v?trea da cer?mica durante o est?gio de queima. O trabalho em quest?o tem como objetivo principal estudar a viabilidade t?cnica de adi??o de cinza de alto forno cer?mico em formula??es de massa para cer?mica estrutural. Neste trabalho foram utilizadas duas argilas (pl?stica e n?o-pl?stica), assim como a cinza provinda da lenha utilizada no processo de queima de cer?mica estrutural. Delineou-se um conjunto de experimentos que permitiram avaliar a influ?ncia do ciclo de temperatura de queima em temperaturas diferentes do teor de cinzas em formula??es para blocos cer?micos atrav?s das propriedades tecnol?gicas, comportamento mec?nico e microestrutura. Foram processadas cinco amostras de cada uma das massas de argila pl?stica e n?o pl?stica sem adi??o de cinza e com adi??o de cinza nos percentuais de 10 % e 20 %, para temperaturas de 850 0C, 950 0C, 1050 0C e 1150 0C, tendo sido obtidas atrav?s do processo de sinteriza??o. Das composi??es estudadas com cinza, a que apresentou melhor desempenho foi a massa de argilas com 10 % de cinza, na temperatura de 1150 ?C, com a menor absor??o de ?gua, menor porosidade aparente, massa espec?fica aparente pouco acima das outras e maior resist?ncia mec?nica ? flex?o. A composi??o efetuada comprovou a viabilidade t?cnica da utiliza??o de cinza na massa para cer?mica estrutural, com manuten??o das suas caracter?sticas necess?rias para os fins a que se destinam

Estilos ABNT, Harvard, Vancouver, APA, etc.

Walters, Kevin Allen. "Feng Shui and Neighborhood Development". VCU Scholars Compass, 2006. http://hdl.handle.net/10156/1559.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sales, J?nior Jos? Carlos Calado. "Avalia??o da potencialidade de argilas de queima clara como mat?rias-primas para o desenvolvimento de novos produtos cer?micos". Universidade Federal do Rio Grande do Norte, 2008. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15550.

Texto completo da fonte

Resumo:

Made available in DSpace on 2014-12-17T14:57:46Z (GMT). No. of bitstreams: 1 JoseCCSJ.pdf: 1343903 bytes, checksum: aa2a5fbffd13b95d16ec1f429e355eb5 (MD5) Previous issue date: 2008-08-20
Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior
The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can economically cripple the use of gas for burning the majority of products manufactured by that action. However some proposals of innovations in terms of process and product are being studied in an attempt to justify the use of natural gas in industry, structural ceramics. One of the aspects investigated is the development of ceramic products differentiated, with new designs and greater value added. Inserted in that context, this paper aims to investigate the potential use of clay-firing clear fabrication of the "bricks of apparent joins drought", a new ceramic product with an innovative way. The development of the work was done in three stages. In the initial stage was held the characterization of raw materials, sought information on physical, chemical, mineralogical and mechanical samples. In the second stage five bodies were made using two of the nine ceramic clay characterized the first step. The masses were analyzed and compared with respect to the size distribution, plasticity and technological properties. In the last part of this work was carried out tests on massive bricks manufactured on an industrial scale. The results show that the nine clays can be used in the manufacture of new ceramic products, is the only constituent of mass ceramic or by mixing with other(s) clay(s
As ind?strias de cer?mica estrutural figuram entre as cadeias produtivas mais importantes do estado do Rio Grande do Norte. O setor e outros grupos de interesse almejam a substitui??o da lenha pelo g?s natural. Estudos realizados nesse sentido conclu?ram que a simples mudan?a n?o garante produtos de qualidade superior, e que o aumento no gasto com combust?vel pode inviabilizar economicamente o uso do g?s para queima da maioria dos produtos fabricados por esse seguimento. Entretanto algumas propostas de inova??es em termos de processo e produto v?m sendo estudadas na tentativa de justificar o uso do g?s natural na ind?stria de cer?mica estrutural. Uma das vertentes pesquisadas ? o desenvolvimento de produtos cer?micos diferenciados, com novos designs e maior valor agregado. Inserido nesse contexto, o presente trabalho tem como objetivo investigar a potencialidade do uso de argilas de queima clara para fabrica??o dos tijolos de junta seca , um novo produto cer?mico com forma inovadora. O desenvolvimento do trabalho foi efetuado em tr?s etapas. Na etapa inicial foi realizada a caracteriza??o das mat?rias-primas, buscando obter informa??es em rela??o ?s propriedades f?sicas, qu?micas, mineral?gicas e mec?nicas das amostras. Na segunda etapa foram formuladas cinco massas cer?micas utilizando duas das nove argilas caracterizadas na primeira etapa. As massas foram analisadas e comparadas em rela??o ? distribui??o granulometria, plasticidade e propriedades tecnol?gicas. Na ?ltima parte desse trabalho foi realizado testes em tijolos maci?os fabricados em escala industrial. Os resultados mostram que as nove argilas podem ser utilizadas na fabrica??o dos novos produtos cer?micos, seja como ?nica constituinte da massa cer?mica ou pela mistura com outra(s) argila(s)

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ryndzionek, Roland. "New concept, implementation and analysis of the multicell piezoelectric motor for the control of the car seat position". Phd thesis, Toulouse, INPT, 2015. http://oatao.univ-toulouse.fr/15755/1/Ryndzionek.pdf.

Texto completo da fonte

Resumo:

The research works in the frame of the dissertation have been carried out with the cooperation between the University INP - ENSEEIHT - LAPLACE (Laboratory on Plasma and Conversion of Energy), Toulouse, France, and the Gdańsk University of Technology, Faculty of Electrical and Control Engineering, Research Unit Power Electronics and Electrical Machines, Gdańsk, Poland. The main scope of the dissertation was following: development a novel concept, implementation and analysis of the multicell piezoelectric motor (MPM) for the control of the car seat position. The new concept of the MPM is based on a combined topology using the working principles of the traveling wave motor/actuator (known as the Shinsei motor), and the electromechanical structure of the rotating-mode motor/actuator. The electromechanical structure of each rotating-mode motor has been considered as an independent one – referred to as a "single cell". The application of the novel MPM for the control of the car seat position will reduce the number of gears due to its direct coupling with the driving/movement shaft of the seat positioning system. The achieved effects of a such integrated structure will be following: a higher efficiency, a lower noise of performance, a low cost of manufacturing, and in general a lower pollution of the environment. The preliminary dimensions and parameters of the prototype MPM have been verified using its developed analytical (geometrical) model and numerical methods (FEM). The prototype MPM has been manufactured. Finally, the laboratory measurements of the MPM prototype has been carried out.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dantas, Ant?nio de P?dua Arlindo. "Utiliza??o de res?duos de rochas ornamentais na produ??o de cer?mica branca". Universidade Federal do Rio Grande do Norte, 2009. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15554.

Texto completo da fonte

Resumo:

Made available in DSpace on 2014-12-17T14:57:47Z (GMT). No. of bitstreams: 1 AntonioPAD.pdf: 942580 bytes, checksum: 17f7e873cef66889a6f05568f5f345cb (MD5) Previous issue date: 2009-10-06
The marble and granite waste come from the process of mining of those ornamental rocks for use in the building industry. Brazil is one of the largest producers of blocks or finished products of ornamental rocks, extracting about 5.2 tons / year. The largest national producers are the states of Esp?rito Santo, Minas Gerais and Bahia which account for 80% of the Brazilian production. However, the waste total amount during processing of these blocks reaches 40% of the total. The use of the waste produced by this industry in white ceramics could be a form of disposition, because these materials, are thrownasa mud directly at decantation ponds, wastelands or in rivers, without any treatment. The present work has as main purpose to study the influence that reject of the ornamental rocks on the physical and mechanical properties of white ceramics. X-Ray characterizations of raw materials by were performed X-Ray fluorescence, X-Ray diffraction, granulometric, thermogravimetric and thermodiferencial analysis, five formulations were made (0, 10, 20, 30, 40% in granite weight) wich were burned at three temperatures: 1100?C, 1150?C and 1200?C with 60 minutes of sorling time. After sintering, the samples were submitted to different analyser absorption of water, linear retraction, apparent porosity, apparent specific mass, flexival stronght, and scanning were obtained microscopy. Compatible technological properties within the limits demanded for the production of porcelainized stoneware
Os rejeitos de granito s?o provenientes do processo de minera??o dessas rochas ornamentais para uso na ind?stria da constru??o civil. O Brasil ? um dos maiores produtores de blocos ou produtos acabados de rochas ornamentais, extraindo cerca de 5,2 milh?es toneladas/ano. Os maiores produtores nacionais s?o os estados do Esp?rito Santo, Minas Gerais e Bahia que respondem por 80% da produ??o nacional. Por?m o desperd?cio em todo o processo de desmonte destes blocos chega a incr?veis 40% do total. O uso dos detritos produzidos por esta ind?stria na cer?mica branca poderia ser uma forma de disposi??o desse material, visto que estes materiais, sob forma de lama, s?o lan?ados diretamente em lagoas de decanta??o, terrenos baldios ou jogados em rios, sem nenhum tratamento. O presente trabalho tem como prop?sito principal estudar a influ?ncia que o rejeito das rochas ornamentais exerce sobre as propriedades f?sicas e mec?nicas da cer?mica branca. Para isso, foram feitas as caracteriza??es das mat?rias-primas por fluoresc?ncia de Raios-X, difra??o de Raios-X, an?lise granulom?trica, an?lise termogravim?trica e an?lise termodiferencial, elaborando-se cinco formula??es (0, 10, 20, 30, 40% em peso de granito) que foram queimadas em tr?s temperaturas: 1100?C, 1150?C e 1200?C com 60 minutos de patamar. Ap?s a queima, os corpos-de-prova foram submetidos a ensaios de absor??o de ?gua, retra??o linear, porosidade aparente, massa espec?fica aparente, resist?ncia ? flex?o, microscopia eletr?nica de varredura. Foram obtidas propriedades tecnol?gicas compat?veis com os limites m?nimos exigidos para a fabrica??o de um gr?s porcelanato

Estilos ABNT, Harvard, Vancouver, APA, etc.

ANTONIO, Cec?lia de Souza. "Ocorr?ncia de bact?rias endof?ticas associadas a variedades de cana-de-a??car cultivadas nos estados: Alagoas e Pernambuco". Universidade Federal Rural do Rio de Janeiro, 2010. https://tede.ufrrj.br/jspui/handle/jspui/1535.

Texto completo da fonte

Resumo:

Submitted by Jorge Silva (jorgelmsilva@ufrrj.br) on 2017-04-18T20:10:31Z No. of bitstreams: 1 2010 - Cec?lia de Souza Ant?nio.pdf: 1613209 bytes, checksum: e560fdd88ef8707b79c6d4b0120730ec (MD5)
Made available in DSpace on 2017-04-18T20:10:31Z (GMT). No. of bitstreams: 1 2010 - Cec?lia de Souza Ant?nio.pdf: 1613209 bytes, checksum: e560fdd88ef8707b79c6d4b0120730ec (MD5) Previous issue date: 2010-04-20
CAPES
The sugar cane is one of the major agricultural products in Brazil. The crop is able to associate with diazotrophic bacteria (fix nitrogen from the air), that may be located inside the plant tissue (entophytic). The diazotrophic bacteria are capable of promoting growth of sugar cane by means of biological nitrogen fixation (BNF) or production of hormones. But little is known about populations of these bacteria present in sugar cane. This work aimed to study diversity of the population and identify the isolates by molecular and physiological methods, as well as to assess the effectiveness of some isolates to promote plant growth of sugar cane in the field. In solid potato media, there were observed the formation of seven groups, with 95% of similarity, showing the great colonies morphology variation. Many isolates showed similar characteristics to the genus Gluconacetobacter, when analyzed in semi-solid LGI-P media and solid Potato-P and LGI-P media. Two isolates were most efficient in the endolar synthesis with production over 49 ?g/mL. All isolates were classified as Gram negative. Of the 36 isolates, 27.5% were similar to the standard strain RB 11366 (Burkholderia tropica), 45% to BR 11281 strain (Gluconacetobacter diazotrophicus) and 5% to the other patterns BR 11335 (Herbaspirillum seropedicae), BR 11504 (Herbaspirillum rubrisubalbicans) and BR 11145 (Azospirillum amazonense). Through the comparison of the sequencing of 16S rDNA with the NCBI GenBank isolate 215 was identified as belonging to species Gluconacetobacter diazotrophicus, the 179-1a belonging to Burkholderia tropica and the isolated 151-B, 211-A, and 219 to the gender Burkholderia. The inoculated strains 160-1 and 215 promoted an increase in the straw dry biomass (up to 0.7 Mg ha-1) and total nitrogen of flag leaf (above 69,7 kg ha-1), respectively in the tested varieties RB 72454 and RB 918,639. Only the 160-1 isolate was able to promote increase in biomass in the RB 867515 variety. Stalk yield was higher for the variety RB 918639 with 191.96 Mg ha-1.
A cana-de-a??car ? um dos principais produtos agr?colas do Brasil. A cultura ? capaz de se associar as bact?rias diazotr?ficas (fixam nitrog?nio do ar), que podem estar no interior do tecido da planta (endof?ticas). As bact?rias diazotr?ficas endof?ticas s?o capazes de promover o crescimento da cana-de-a??car por meio da fixa??o biol?gica do nitrog?nio (FBN) ou pela produ??o de fitorm?nios. Mas pouco se conhece sobre as popula??es presentes destas bact?rias em cana-de-a??car. O presente trabalho visou estudar a diversidade da popula??o e identificar estes isolados, atrav?s de m?todos moleculares e fisiol?gicos, assim como avaliar a efici?ncia de alguns isolados na promo??o de crescimento vegetal de plantas de cana-de-a??car no campo. Foi observada em meio s?lido Batata, com 95% de similaridade, a forma??o de sete grupos mostrando a grande varia??o morfol?gica de col?nias neste meio testado. Muitos isolados apresentaram caracter?sticas similares ao g?nero Gluconacetobacter, quando analisados em meio semi-s?lido LGI-P e s?lido Batata-P e LGI-P. Dois isolados foram mais eficientes na s?ntese de ind?les com produ??es acima de 49 ?g/mL. Todos os isolados foram classificados como Gram negativos. Dos 36 isolados avaliados, 27,5% foram semelhantes ? estirpe padr?o RB 11366 (Burkholderia tropica); 45% a BR 11281 (Gluconacetobacter diazotrophicus) e 5% aos demais padr?es BR 11335 (Herbaspirillum seropedicae), BR 11504 (Herbaspirillum rubrisubalbicans) e BR 11145 (Azospirillum amazonense). Atrav?s da compara??o do seq?enciamento do gene 16S rDNA com o NCBI GenBank o isolado 215 foi identificado com pertencente a esp?cie de Gluconacetobacter diazotrophicus , o 179-1A com pertencente a esp?cie Burkholderia tropica e os isolados 151-B, 211-A e 219 ao g?nero Burkholderia. As estirpes 160-1 e 215 inoculadas promoveram aumento na produ??o de biomassa seca da palha (acima de 0,7 Mg.ha-1) e nitrog?nio total da folha bandeira (acima de 69,7 kg.ha-1), respectivamente nas variedades RB 72454 e RB 918639 testadas. Apenas o isolado 160-1 foi capaz de promover um aumento de biomassa seca na variedade RB 867515. A produ??o de colmos foi maior para a variedade RB918639 com 191,96 Mg.ha-1.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Beatty, Susan Frances. "Psychological factors and stages of change in drivers' willingness to reduce their car use". Thesis, Staffordshire University, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.392448.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Santos, Getulio de Moura. "Estudo das vari?veis de processamento das mat?rias-primas da regi?o do crato - ce na fabrica??o de produtos cer?micos por extrus?o e por prensagem". Universidade Federal do Rio Grande do Norte, 2010. http://repositorio.ufrn.br:8080/jspui/handle/123456789/15595.

Texto completo da fonte

Resumo:

Made available in DSpace on 2014-12-17T14:57:55Z (GMT). No. of bitstreams: 1 GetulioMS.pdf: 1235965 bytes, checksum: 2c47ca0471a5470d046cd558e9c9cca4 (MD5) Previous issue date: 2010-07-10
The limits to inform is about the character stico of basic, quimica, mineralogical and mechaniques of matlaughed material used in the manufacturing process the product certified in economic region the Cariri, specifically in the city of Crato, Cear? state, motivated the development of this work, since in this region the exist ing economic context that a general appear as important in the production chains. Were made twentyfive soils-test specimen collection and the study was performed to differentiate the mat laugh materials of variaveis processing of mathing raw materials in the factory The product mica monkeys by extrusion and pressing. The results were obtained ap s as analyzes: grain size, index of plasticity, fluoresce incidence X-ray difration the X-ray, and analyzes thermicals and properties technological. through s of curves gresifica returned to was a comparison between the retro the linear, absorb to water, porosity and bulk density. the results show that the excellent distribution and character acceptable available for the processing of the structure color dark red. needing, therefore, of the mixture of a less plastic clay with thick granulation, that works as plasticity reducer. In spite of the different resignation forms for prensagem and extrusion, the characteristics of absorption of water and rupture tension the flexing was shown inside of the patterns of ABNT
A limita??o de informa??es sobre as caracter?sticas f?sicas, qu?micas, mineral?gicas e mec?nicas da mat?ria-prima usada no processo de fabrica??o dos produtos cer?micos na regi?o do Cariri, mais precisamente na cidade do Crato, estado do Cear?, motivou o desenvolvimento deste trabalho, visto que nesta regi?o existem cer?micas que num contexto geral figuram como cadeias produtivas importantes no estado. Foram confeccionados vinte e cinco corpos-de-prova da amostra coletada para cada m?todo de conforma??o e foi realizado o estudo das vari?veis de processamento das mat?riasprimas na fabrica??o de produtos cer?micos por extrus?o e prensagem. Os resultados foram obtidos ap?s as an?lises de: granulometria, ?ndice de plasticidade, fluoresc?ncia de raios X, difra??o de raios X, an?lises t?rmicas e propriedades tecnol?gicas. Atrav?s das curvas de gresifica??o obteve-se um comparativo entre a retra??o linear de queima, absor??o de ?gua, porosidade e massa espec?fica aparente. Os resultados mostram que a mat?ria-prima tem excelente distribui??o e caracter?sticas aceit?veis para o processamento de pe?as estruturais de cor escura a vermelha, necessitando, pois, da mistura de uma argila menos pl?stica com granula??o grossa, que funciona como redutor de plasticidade. Apesar das diferentes formas de conforma??o por prensagem e extrus?o, as caracter?sticas de absor??o de ?gua e tens?o de ruptura a flex?o mostrou-se dentro dos padr?es da ABNT

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "CHR 1555"

Matraini, Chiara. Lettere e Rime. Editado por Cristina Acucella. Florence: Firenze University Press, 2019. http://dx.doi.org/10.36253/978-88-6453-817-4.

Texto completo da fonte

Resumo:

Il commento alle Lettere e Rime che Chiara Matraini (1515- 1604), ottantaduenne, pubblicò a Venezia, presso Moretti, nel 1597, intende fornire un’analisi organica della composizione, del rapporto tra i generi, delle modalità dell’imitatio e del sostrato filosofico, sociale e culturale che fanno da sfondo all’ultimo canzoniere. Lo studio si concentra anche sulle revisioni occorse lungo l’arco di un quarantennio (1555-1597), dall’adesione al canone petrarchista e bembiano, al Manierismo di fine secolo, nonché sulla torsione in senso controriformistico caratterizzante a parallela scrivania filosofico-devozionale e qui ravvisabile in filigrana. L’indagine considera inoltre l’intero liber di Lettere e Rime come un insieme volutamente organico e strutturato nel raccordo tra le due parti. Ad emergere è un’opera complessa, anche in virtù della sua ‘marginalità’, restituita insieme ai molteplici ripensamenti che animarono la lunga, quasi secolare, esistenza dell’autrice lucchese.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pontormo, Jacopo Carucci. Diario: Fatto nel tempo che dipingeva il coro di San Lorenzo, 1554-1556. Roma: Gremese, 1988.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cesi, Beatrice Caetani. Virtà più che virili: Le lettere familiari di Beatrice Caetani Cesi (1557-1608). Roma: Viella, 2017.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

J, Wilhelm James, ed. Gay and lesbian poetry: An anthology from Sappho to Michelangelo. New York: Garland, 1995.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Rin-chen-phun-tshogs e Rin-chen-phun-tshogs. ʼBri guṅ pa Ratnaʼi miṅ can gyi skyes rabs mos gus dran paʼi lcags kyu ; and, Rje btsun Rin chen phun tshogs kyi rnam thar smad cha dad paʼi gduṅ ba sel byed: The autobiography of ʼBri-guṅ-pa Rin-chen-phun-tshogs (1509-1557) and its continuation by Rin-chen-dpal, with Rin-chen-phun-tshogsʼ biographies of ʼBri-guṅ-gliṅ-pa Śes-rab-ʼbyuṅ-gnas (1187-1241) and ʼBri-guṅ-pa Kun-dgaʼ-rin-chen (1475-1524). Bir, Distt. Kangra, H.P: Bir Tibetan Society, 1985.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Annales Plantiniennes Depuis la Fondation de l'imprimerie Plantinienne À Anvers Jusqu'à la Mort de Chr. Plantin: 1555-1589. Creative Media Partners, LLC, 2018.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Khuʾī, Ismāʻīl. Sha'er Che Mi Konad?: شاعر چه می]کند. Lulu Press, Inc., 2020.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pontormo, Jacopo Carucci. Diario: Fatto nel tempo che dipingeva il coro di San Lorenzo, 1554-1556 (Gli spilli). Gremese, 1988.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Office of the Federal Register (U.S.) Staff e Government Institutes Staff. 2009 26 CFR 1. 1551-End. Rowman & Littlefield Publishing Group, Incorporated, 2009.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Office Of The Federal Register. 2009 46 CFR 140-155. Bernan Distribution, 2010.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "CHR 1555"

Pele, Ofir, e Michael Werman. "The Quadratic-Chi Histogram Distance Family". In Computer Vision – ECCV 2010, 749–62. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-15552-9_54.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sánchez, J. L., L. García, M. L. Salvador, R. Bilbao, J. Arauzo e Z. Fang. "Black Liquor Pyrolysis and Char Reactivity". In Developments in Thermochemical Biomass Conversion, 294–304. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1559-6_22.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Talarico, Andrea. "Strategia polemica e modalità dell’invettiva nell’Apologia di Annibal Caro". In Studi e ricerche del Dipartimento di Lettere e Filosofia, 69–92. Firenze: Società Editrice Fiorentina, 2023. http://dx.doi.org/10.35948/dilef/978-88-6032-727-7.05.

Texto completo da fonte

Resumo:

Il contributo mira a ricostruire gli aspetti principali della strategia polemica impiegata da Annibal Caro nell’Apologia degli academici di Banchi di Roma contro messer Lodovico Castelvetro (princeps: Parma, Viotti, 1558). Si è tentato di mostrare alcuni dei modelli impiegati da Caro nella sua invettiva contro Castelvetro e, attraverso l’analisi delle sezioni che compongono l’opera e delle “maschere” fittizie che le hanno composte nella finzione letteraria (Buratto, Predella, Fedocco, Pasquino), di mostrare gli aspetti salienti del programma polemico cariano. Programma che coinvolgeva aspetti di varia natura (modelli letterari, lingua, paratesto e struttura), mediante il riconoscimento dei quali si cerca di mostrare le modalità di funzionamento dell’Apologia a livello macrotestuale.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gigov, Boyko, Nikolay Pavlov e Maria Stefanova-Pavlova. "Hybrid Car Powertrains: A Review and Analysis". In Communications in Computer and Information Science, 207–23. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15559-8_16.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zhang, Changyou, Bo Huang, Hongcai Chen, Yu Cheng, Li Wang e Ting Wang. "Cloud-Based Car Image Retrieval with Interactive Script". In Human Centered Computing, 584–97. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15554-8_48.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Indarapu, Sai Rama Krishna, Narasimha Reddy Soora, Mohammed Sharfuddin Waseem e Mohammed Ehsan Ur Rahman. "Novel Approach for Character Recognition Using Chi-Square". In Lecture Notes in Networks and Systems, 413–24. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1559-8_42.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Salorio, Demetrio Barcio. "San Juan de Dios (1495-1550)". In WPA Anthology of Spanish Language Psychiatric Texts, 45–46. Chichester, UK: John Wiley & Sons, Ltd, 2008. http://dx.doi.org/10.1002/9780470986752.ch2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ani, F. N., e R. Zailani. "Characteristics of Pyrolysis Oil and Char from Oil Palm Shells". In Developments in Thermochemical Biomass Conversion, 425–32. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1559-6_33.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Petersen, S. B., L. Th Pedersen e U. Henriksen. "Theoretical and Experimental Investigation on Heat Transfer in Fixed Char Beds". In Developments in Thermochemical Biomass Conversion, 851–63. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1559-6_68.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Scahill, J., J. P. Diebold e C. Feik. "Removal of Residual Char Fines from Pyrolysis Vapors by Hot Gas Filtration". In Developments in Thermochemical Biomass Conversion, 253–66. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1559-6_19.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "CHR 1555"

Lester, Benjamin D., Sarah D. Hacker, Shaun P. Vecera e Matthew Rizzo. "Serialization of Behavior During Car Following in Older Drivers". In Driving Assessment Conference. Iowa City, Iowa: University of Iowa, 2015. http://dx.doi.org/10.17077/drivingassessment.1555.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Von Spakovsky, Michael R., Douglas J. Nelson, Michael W. Ellis, Benoit Olsommer e Michael J. Ogburn. "A Multi– / Inter–Disciplinary Approach to Fuel Cell System Development: The U.S. DoE GATE Center for Automotive Fuel Cell Systems at Virginia Tech". In Future Car Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1555.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Brodsky, Warren, e Matan Ziv. "Car-aoke: Vocal Performances Indicate Distraction Effects of In-Car Music". In Driving Assessment Conference. Iowa City, Iowa: University of Iowa, 2015. http://dx.doi.org/10.17077/drivingassessment.1545.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Seliger-Ost, Hannah, Peter Kutne, Jan Zanger e Manfred Aigner. "Experimental Investigation of the Impact of Biogas on a 3 kW Micro Gas Turbine FLOX®-Based Combustor". In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15556.

Texto completo da fonte

Resumo:

Abstract The use of biogas has currently two disadvantages. Firstly, processing biogas to natural gas quality for feeding into the natural gas grid is a rather energy consuming process. Secondly, the conversion into electricity directly in biogas plants produces waste heat, which largely cannot be used. Therefore, a feed-in of the desulfurized and dry biogas to local biogas grids would be preferable. Thus, the biogas could be used directly at the end consumer for heat and power production. As biogas varies in its methane (CH4) and carbon dioxide (CO2) content, respectively, this paper studies the influence of different biogas mixtures compared to natural gas on the combustion in a FLOX®-based six nozzle combustor. The single staged combustor is suitable for the use in a micro gas turbine (MGT) based combined heat and power (CHP) system with an electrical power output of 3 kW. The combustor is studied in an optically accessible atmospheric test rig, as well as integrated into the MGT system. This paper focuses on the influence of the admixture of CO2 to natural gas on the NOX and CO emissions. Furthermore, at atmospheric conditions the shape and location of the heat release zone is investigated using OH* chemiluminescence (OH* CL). The combustor could be stably operated in the MGT within the complete stationary operating range with all fuel mixtures.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trendewicz, A. A., e R. J. Braun. "Modeling and Performance Evaluation of a Large-Scale SOFC-Based Combined Heat and Power System for Biogas Utilization at a Wastewater Treatment Facility". In ASME 2012 10th International Conference on Fuel Cell Science, Engineering and Technology collocated with the ASME 2012 6th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/fuelcell2012-91373.

Texto completo da fonte

Resumo:

Biogas has been identified as an attractive fuel for solid oxide fuel cells (SOFCs) due to its high methane content and its renewable status. Current experimental and modeling research efforts in this field have focused mainly on single-cell and small-scale systems performance evaluation. In this paper a large scale biogas source (∼15.5 MW) from a large wastewater treatment facility is considered for integration with an SOFC-based system. Data concerning biogas fuel flow rate and composition have been acquired from a wastewater reclamation facility in Denver and are used as inputs to a steady-state model of an SOFC combined heat and power (CHP) system developed with Aspen Plus. The proposed system concept for this application comprises an advanced SOFC system with anode gas recirculation (AGR) equipped with biogas clean-up and a waste heat recovery system. The system performance is evaluated at near atmospheric pressure with a 725°C nominal operating temperature of the fuel cell stack and system fuel utilization of 80%. The average biogas fuel input has a composition of 60% CH4, 39% CO2, and 1% N2 on a dry molar basis. The SOFC-CHP system employs 80% internal reforming at a steam-to-carbon ratio of 1.2. The system offers a net electrical efficiency of 51.6% LHV and a net CHP efficiency of 87.5% LHV. The influence of the operating parameters on the system efficiency is investigated and discussed. The individual contribution of system components to the total inefficiency of the system is quantified with an exergy analysis. Exergy analysis results indicate that the system could offer a tremendous energy efficiency improvement when compared to biogas-supplied combustion turbines currently installed at the facility which operate with an average net electrical efficiency of 25%-LHV.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gopisetty, Anupama, Yibin Chen, Quynh Nguyen e Maurizio Chiriva-Internati. "Abstract 1535: Allogenic CAR iNKT as a cell therapy platform targeting tumor antigen Isomesothelin". In Proceedings: AACR Annual Meeting 2021; April 10-15, 2021 and May 17-21, 2021; Philadelphia, PA. American Association for Cancer Research, 2021. http://dx.doi.org/10.1158/1538-7445.am2021-1535.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Norris, Robert E., Christopher J. Janke, Cliff Eberle e George E. Wrenn. "Electron Beam Curing of Composites Overview". In Future Car Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1525.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wereszczak, A. A., L. Riester e K. Breder. "In-Situ Mechanical Property Evaluation of Dielectric Ceramics in Multilayer Capacitors". In Future Car Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1535.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Martin, Kimberly J., Patrick J. Szary, Michael Strizki e Ali Maher. "Fabrication and Testing of a Hybrid Electric Vehicle Utilizing a Proton Exchange Membrane (PEM) Fuel Cell". In Future Car Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1552.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Van Schaik, Marcel, e Darryl Martin. "ULSAB Advanced Vehicle Concepts - The Latest Steel Demonstration for Automotive". In Future Car Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1545.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!