Literatura científica selecionada sobre o tema "Chargement thermomécanique"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Chargement thermomécanique".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Chargement thermomécanique"
Soumahoro, Zoumana, e Hubert Maigre. "Analyse thermomécanique des problèmes de fissure fixe sous chargement dynamique". Comptes Rendus Mécanique 345, n.º 3 (março de 2017): 221–38. http://dx.doi.org/10.1016/j.crme.2017.01.002.
Texto completo da fonteBrek, Samir, Kamel Zidani, Hamid Djebaili, Rabah Manaa e Hamma Zedira. "Prévision de la ruine des composites stratifiés perforés sous chargement thermomécanique". Revue des composites et des matériaux avancés 21, n.º 2 (31 de agosto de 2011): 145–59. http://dx.doi.org/10.3166/rcma.21.145-159.
Texto completo da fonteMaitournam, M. Habibou, Benjamin Pommier e Jean-Jacques Thomas. "Détermination de la réponse asymptotique d'une structure anélastique sous chargement thermomécanique cyclique". Comptes Rendus Mécanique 330, n.º 10 (outubro de 2002): 703–8. http://dx.doi.org/10.1016/s1631-0721(02)01516-4.
Texto completo da fonteBouvet, C., S. Calloch e C. Lexcellent. "Approches expérimentale et théorique du comportement thermomécanique sous chargement multiaxial d'alliages à mémoire de forme polycristallins". Journal de Physique IV (Proceedings) 12, n.º 11 (dezembro de 2002): 283–90. http://dx.doi.org/10.1051/jp4:20020504.
Texto completo da fonteLetouzé, N., R. Brenner, J. L. Béchade, O. Castelnau, M. H. Mathon e B. Bacroix. "Analyse par diffraction des neutrons des déformations résiduelles dans un alliage de zirconium après un chargement thermomécanique". Journal de Physique IV (Proceedings) 12, n.º 6 (julho de 2002): 125–36. http://dx.doi.org/10.1051/jp4:20020220.
Texto completo da fonteTeses / dissertações sobre o assunto "Chargement thermomécanique"
Merhy, Elias. "Propagation de fissure sous chargement thermomécanique cyclique anisotherme". Phd thesis, Ecole Polytechnique X, 2011. http://pastel.archives-ouvertes.fr/pastel-00658854.
Texto completo da fonteToitot, Denis. "Vieillissement sous chargement thermomécanique d'un matériau composite à matrice métallique". Paris, ENMP, 1991. http://www.theses.fr/1991ENMP0310.
Texto completo da fonteBelmahjoub, Faycal. "Comportement thermomécanique de matériaux métalliques sous divers trajets de chargement uniaxe". Montpellier 2, 1990. http://www.theses.fr/1990MON20153.
Texto completo da fontePhilip, Olivier. "Structure métallique sous un chargement thermomécanique cyclique : Interaction Déformation Progressive - Fluage". Lyon, INSA, 1996. http://www.theses.fr/1996ISAL0021.
Texto completo da fonteThis work concerns the study of a metallic structure behaviour under a cyclic thermomechanical loading in presence of creep. Under this kind of loading, the structure may take three steady states elastic shakedown, plastic shakedown or ratchet. The security of the workmanship prescribes the conceptor to ensure that irreversible distortions remain limited as well as result stabilized after some loading cycles. For that, the conceptor may recourse either to an experimental method or to an incremental numerical approach or to simplified methods. Starting from trials of gradual distortions with creep on the model “BITUBE” and a complete characterization of the material, we test the aptitude of various viscoplastic modelisations to reproduce the actual behaviour of the structure. Then we carry out a validation of some simplified methods and we analyze their ability to integrate the creep
Michaud, Franck. "Rhéologie de panneaux composites bois/thermoplastiques sous chargement thermomécanique : aptitude au postformage". Thesis, Université Laval, 2003. http://www.theses.ulaval.ca/2003/21360/21360.pdf.
Texto completo da fonteThis project deals with a new type of Wood Polymer Composite (WPC) able to be post moulded. Based on wood industry processing we developed different wood/adhesive/thermoplastic fibreboards. This exploratory work leads to an innovative WPC fibreboard dedicated to structural or decorative use. In order to reach sufficient mechanical properties we managed to improve the cohesion properties. In fact, weak interfacial adhesion is a recurrent problem of all Wood/Thermoplastic products. An original coating process of MAPP onto PP fibres gave great interfacial adhesion enhancement and mechanical properties similar to MDF panels. The post thermoforming ability was measured with an original thermoforming test. These investigations, through characterisation and modelling, allowed us to determine the role of different factors and their interactions. Our post mouldable composite WPC fibreboards are porous and made-up of a fibre network which showed a complex rheological behaviour. Morphology, concentration, distribution of each components and surface interactions between them explain this behaviour.
Michaud, Franck, e Franck Michaud. "Rhéologie de panneaux composites bois/thermoplastiques sous chargement thermomécanique : aptitude au postformage". Doctoral thesis, Université Laval, 2003. http://hdl.handle.net/20.500.11794/17863.
Texto completo da fonteCe travail est une étude exploratoire sur la possibilité de réaliser un composite bois polymère ou WPC, rencontrant certaines exigences, notamment la post-thermoformabilité. Nous avons élaboré un panneau composite fibre de bois/thermodurcissable/thermoplastique dans la logique d’un « éco-matériau ». Ce matériau innovant est destiné à un usage structurel ou décoratif. Il est fabriqué selon un procédé de pressage à chaud d’un matelas fibreux. La problématique de l’incompatibilité d’interface entre le bois et le thermoplastique, récurrente pour bon nombre de WPC, a été résolue grâce au développement d’une technique originale d’amélioration de l’adhésion par enrobage. Les améliorations ont permis d’obtenir des caractéristiques physico-mécaniques semblables aux panneaux de densité moyenne. La composante thermoplastique nous a permis d’octroyer une aptitude de post-thermoformabilité à ce matériau. L’analyse détaillée de la composition des panneaux WPC, de leurs propriétés à différentes températures, ainsi qu’un travail de modélisation expliquent, en partie, le comportement complexe de ce nouveau WPC.
This project deals with a new type of Wood Polymer Composite (WPC) able to be post moulded. Based on wood industry processing we developed different wood/adhesive/thermoplastic fibreboards. This exploratory work leads to an innovative WPC fibreboard dedicated to structural or decorative use. In order to reach sufficient mechanical properties we managed to improve the cohesion properties. In fact, weak interfacial adhesion is a recurrent problem of all Wood/Thermoplastic products. An original coating process of MAPP onto PP fibres gave great interfacial adhesion enhancement and mechanical properties similar to MDF panels. The post thermoforming ability was measured with an original thermoforming test. These investigations, through characterisation and modelling, allowed us to determine the role of different factors and their interactions. Our post mouldable composite WPC fibreboards are porous and made-up of a fibre network which showed a complex rheological behaviour. Morphology, concentration, distribution of each components and surface interactions between them explain this behaviour.
This project deals with a new type of Wood Polymer Composite (WPC) able to be post moulded. Based on wood industry processing we developed different wood/adhesive/thermoplastic fibreboards. This exploratory work leads to an innovative WPC fibreboard dedicated to structural or decorative use. In order to reach sufficient mechanical properties we managed to improve the cohesion properties. In fact, weak interfacial adhesion is a recurrent problem of all Wood/Thermoplastic products. An original coating process of MAPP onto PP fibres gave great interfacial adhesion enhancement and mechanical properties similar to MDF panels. The post thermoforming ability was measured with an original thermoforming test. These investigations, through characterisation and modelling, allowed us to determine the role of different factors and their interactions. Our post mouldable composite WPC fibreboards are porous and made-up of a fibre network which showed a complex rheological behaviour. Morphology, concentration, distribution of each components and surface interactions between them explain this behaviour.
Michaud, Franck. "Rhéologie de panneaux composite bois/thermoplastiques sous chargement thermomécanique : aptitude au postformage". Bordeaux 1, 2003. http://www.theses.fr/2003BOR16010.
Texto completo da fonteThis project deals with a new type of Wood Polymer Composite (WPC) able to be post moulded. Based on wood industry processing we developed different wood/adhesive/thermoplastic fibreboards. This exploratory work leads to an innovative WPC fibreboard dedicated to structural or decorative use. In order to reach sufficient mechanical properties we managed to improve the cohesion properties. In fact, weak interfacial adhesion is a recurrent problem of all Wood/Thermoplastic products. An original coating process of MAPP onto PP fibres gave great interfacial adhesion enhancement and mechanical properties similar to MDF panels. The post thermoforming ability was measured with an original thermoforming test. These investigations, through characterisation and modelling, allowed us to determine the role of different factors and their interactions. Our post mouldable composite WPC fibreboards are porous and made-up of a fibre network which showed a complex rheological behaviour. Morphology, concentration, distribution of each components and surface interactions between them explain this behaviour
Moncel, Laurence. "Etude des mécanismes d'endommagement d'un assemblage cuivre/composite carbone-carbone sous chargement thermomécanique". Bordeaux 1, 1999. http://www.theses.fr/1999BOR10558.
Texto completo da fonteSbitti, Amine. "Propagation des fissures 2D et 3D planes sous chargement thermomécanique à amplitudes variables". Paris 6, 2009. http://www.theses.fr/2009PA066686.
Texto completo da fontePommier, Benjamin. "Détermination de la réponse asymptotique d'une structure anélastique soumise à un chargement thermomécanique cyclique". Phd thesis, Ecole Polytechnique X, 2003. http://pastel.archives-ouvertes.fr/pastel-00004229.
Texto completo da fonte